Re: New design

[Richard Ellis]

Bill
It looks a nice little machine, in fact it is power to my elbow, I am 
thinking of taking parts from the Woodchuck motors etc.
But early days yet,
Richard 

On Thursday, May 4, 2017 at 5:29:58 AM UTC+1, Curtis wrote:
>
> Just wanted to know what  you all think?
> This is just a test piece, I think it will become a pencil holder???  I 
> just wanted to try something new. 
> Any and All input is as always welcome!  ;-)
>
> C.A.G.
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: New design

[Bill Bulkeley]

Thanks tim i wasn’t sure if it was yours or not. Defiantly a fun accessory for 
the mills   

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim Krause
Sent: Wednesday, 10 May 2017 2:33 PM
To: Legacy Ornamental Mills
Subject: RE: New design

 

That my waved object.  For those that don't know:  
http://www.artscopes.com/legacyornamentalmill/tools/waveattachment/waveattachment.html

-Tim

Sent from BlueMail <http://www.bluemail.me/r?b=9660>  

On May 9, 2017, at 8:44 PM, Bill Bulkeley <bulke...@mmnet.com.au> wrote:

 

Reciprocator or wave attachment usually made by tim on here or made yourself 
curt has been posting about it a few times recently

 

Here is my version  on the revo and also what they can produce I’m not sure who 
made this wave but one of the original members

 

Bill

 

 

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of MWF
Sent: Wednesday, 10 May 2017 10:42 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New design

 

Ok Richard - 
What's a "Reciprocator"?  Is it something that Legacy only sold in "The 
Empire"? 
I have never heard of nor seen one in "The Colonies" (USA).  
Mac

  _  

  _  

-Original Message- 
From: Richard Ellis 
Sent: May 9, 2017 3:14 PM 
To: Legacy Ornamental Mills 
Cc: Legacy-Ornamental-Mills@googlegroups.com, curtgeo...@wowway.com 
Subject: Re: New design 

Hi Curtis,

That piece looks great

As you probably know I have just managed to get a Revo, half an hour ago I did 
my very first cut on it. And that was using the reciprocator that came with it, 
 Now if I can do what you do on your reciprocator I shall be more than pleased, 
Don't know how long it will be before I get power to the drives???

Cheers 

Richard
On Thursday, May 4, 2017 at 5:29:58 AM UTC+1, Curtis wrote:

Just wanted to know what  you all think?

This is just a test piece, I think it will become a pencil holder???  I just 
wanted to try something new. 

Any and All input is as always welcome!  ;-)

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 


 
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avg.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: New design

[Tim Krause]

That my waved object.  For those that don't know:  
http://www.artscopes.com/legacyornamentalmill/tools/waveattachment/waveattachment.html

-Tim

⁣Sent from BlueMail ​

On May 9, 2017, 8:44 PM, at 8:44 PM, Bill Bulkeley <bulke...@mmnet.com.au> 
wrote:
> 
>
>Reciprocator or wave attachment usually made by tim on here or made
>yourself curt has been posting about it a few times recently
>
> 
>
>Here is my version  on the revo and also what they can produce I’m not
>sure who made this wave but one of the original members
>
> 
>
>Bill
>
> 
>
> 
>
> 
>
>From: legacy-ornamental-mills@googlegroups.com
>[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of MWF
>Sent: Wednesday, 10 May 2017 10:42 AM
>To: legacy-ornamental-mills@googlegroups.com
>Subject: Re: New design
>
> 
>
>Ok Richard - 
>What's a "Reciprocator"?  Is it something that Legacy only sold in "The
>Empire"? 
>I have never heard of nor seen one in "The Colonies" (USA).  
>Mac
>
>  _  
>
>  _  
>
>-Original Message- 
>From: Richard Ellis 
>Sent: May 9, 2017 3:14 PM 
>To: Legacy Ornamental Mills 
>Cc: Legacy-Ornamental-Mills@googlegroups.com, curtgeo...@wowway.com 
>Subject: Re: New design 
>
>Hi Curtis,
>
>That piece looks great
>
>As you probably know I have just managed to get a Revo, half an hour
>ago I did my very first cut on it. And that was using the reciprocator
>that came with it,  Now if I can do what you do on your reciprocator I
>shall be more than pleased, Don't know how long it will be before I get
>power to the drives???
>
>Cheers 
>
>Richard
>On Thursday, May 4, 2017 at 5:29:58 AM UTC+1, Curtis wrote:
>
>Just wanted to know what  you all think?
>
>This is just a test piece, I think it will become a pencil holder???  I
>just wanted to try something new. 
>
>Any and All input is as always welcome!  ;-)
>
> 
>
>C.A.G.
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To post to this group, send email to
>legacy-ornamental-mills@googlegroups.com.
>Visit this group at
>https://groups.google.com/group/legacy-ornamental-mills.
>For more options, visit https://groups.google.com/d/optout.
>
>
>
> 
>
>
><http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>
>
>Virus-free. 
><http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>www.avg.com 
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To post to this group, send email to
>legacy-ornamental-mills@googlegroups.com.
>Visit this group at
>https://groups.google.com/group/legacy-ornamental-mills.
>For more options, visit https://groups.google.com/d/optout.
>
>-- 
>You received this message because you are subscribed to the Google
>Groups "Legacy Ornamental Mills" group.
>To unsubscribe from this group and stop receiving emails from it, send
>an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>To post to this group, send email to
>legacy-ornamental-mills@googlegroups.com.
>Visit this group at
>https://groups.google.com/group/legacy-ornamental-mills.
>For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

Re: New design

[MWF]

Ok Richard - What's a "Reciprocator"?  Is it something that Legacy only sold in "The Empire"? I have never heard of nor seen one in "The Colonies" (USA).  Mac-Original Message-
From: Richard Ellis <rchrd.ell...@gmail.com>
Sent: May 9, 2017 3:14 PM
To: Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com>
Cc: Legacy-Ornamental-Mills@googlegroups.com, curtgeo...@wowway.com
Subject: Re: New design

Hi Curtis,That piece looks greatAs you probably know I have just managed to get a Revo, half an hour ago I did my very first cut on it. And that was using the reciprocator that came with it,  Now if I can do what you do on your reciprocator I shall be more than pleased, Don't know how long it will be before I get power to the drives???Cheers RichardOn Thursday, May 4, 2017 at 5:29:58 AM UTC+1, Curtis wrote:Just wanted to know what  you all think?This is just a test piece, I think it will become a pencil holder???  I just wanted to try something new. Any and All input is as always welcome!  ;-)C.A.G.



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: New design

[Bill Bulkeley]

What are your impressions on the revo so far or is it too early to tell yet?

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Richard Ellis
Sent: Wednesday, 10 May 2017 5:14 AM
To: Legacy Ornamental Mills
Cc: Legacy-Ornamental-Mills@googlegroups.com; curtgeo...@wowway.com
Subject: Re: New design

 

Hi Curtis,

That piece looks great

As you probably know I have just managed to get a Revo, half an hour ago I did 
my very first cut on it. And that was using the reciprocator that came with it, 
 Now if I can do what you do on your reciprocator I shall be more than pleased, 
Don't know how long it will be before I get power to the drives???

Cheers 

Richard
On Thursday, May 4, 2017 at 5:29:58 AM UTC+1, Curtis wrote:

Just wanted to know what  you all think?

This is just a test piece, I think it will become a pencil holder???  I just 
wanted to try something new. 

Any and All input is as always welcome!  ;-)

 

C.A.G.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 


 
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avg.com 

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: New design

[Bill Bulkeley]

If the roller that contacts the rosette template came in from the side instead 
of underneath would that make a larger pattern on the work

If so have it move from the side to the bottom would change the pattern size or 
am i on the wrong track

 

Bill

 

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Tim
Sent: Sunday, 7 May 2017 4:10 PM
To: Legacy Ornamental Mills
Subject: Re: New design

 

It would be nice to be able to increase or decrease the amplitude of the 
rossette.  Any ideas?

-Tim


On Saturday, May 6, 2017 at 6:12:19 PM UTC-7, aussiman wrote:

It’s nice is it possible to get the pattern in the flute to stand out a little 
more? . I think that would really make it pop

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE
Sent: Sunday, 7 May 2017 8:55 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New design

 

Hi Bill

I agree here is the first thing, that I tried it out on today.  Please let me 
know what you think?

 

C.A.G.

 

  _  

From: "Bill Bulkeley" <bulke...@mmnet.com.au>
To: legacy-ornamental-mills@googlegroups.com
Sent: Saturday, May 6, 2017 6:25:21 PM
Subject: RE: New design

 

It sure is a different and unique pattern something defiantly to keep to be 
used on future projects 

 

Bill  

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE
Sent: Sunday, 7 May 2017 6:36 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New design

 

Hello Everyone

Never give up! today's play time turned out something that I will be using more 
in the future. ;-)  

 

Its time of the Happy Dance!!! 

 

C.A.G.

 

  _  

From: "CURTIS GEORGE" <curtgeo...@wowway.com>
To: legacy-ornamental-mills@googlegroups.com
Sent: Friday, May 5, 2017 9:50:09 AM
Subject: Re: New design

 

Thank you.

The idea is to get the most of of the Legacy, I started looking as some other 
Ornamental turning equipment, trying to figure out different ways to make 
something different, I found an Ornamental slide rest in one of my Holtzappffel 
turning books.

The concept of template following was made in the design of the Legacy, but how 
could I get more from a template then just following a straight line?  

Since Tim found the Atkinson"s reciprocating jig (which became the Wave 
attachment) I figured that the two concepts were close enough to each-other to 
be useful on the Legacy.

I am still playing around with different shapes and sizes of templates. I am 
finding the simpler template shapes work best, Oval,triangle,square, hart shape 
... work nicely, but more Ornamental (detailed patterns like a rose lathe uses) 
dose not work well with this concept.

Now what I am also looking at is , different types of cuts as well. example 
cutting form the side vs  the top. or cutting for off center vs on center...

I am planing to try an off center cut today, My theory is off center with a 
cutter and a more quick changing template, should give me a pumping action look 
(which is more an OT type of looking cut.)

Wish me luck. and I will let you all know how it turns out. ;-)

 

talk to you all more, latter.

C.A.G.

 

  _  

From: "Ccm Ccm" <ccmdesi...@gmail.com>
To: legacy-ornamental-mills@googlegroups.com
Sent: Friday, May 5, 2017 7:21:52 AM
Subject: Re: New design

 

Looks nice, I like the idea

 

On Thursday, May 4, 2017, CURTIS GEORGE <curtgeo...@wowway.com> wrote:



No problems there. ;-)

I can go into more detail latter.  All that I can say at this min. is there are 
a lot of possibility out there .

Im going to hit the hay now.

talk to you more latter.

 

Have a good night.

C.A.G.

 

  _  

From: "Bill Bulkeley" <bulke...@mmnet.com.au>
To: legacy-ornamental-mills@googlegroups.com
Sent: Thursday, May 4, 2017 1:38:59 AM
Subject: RE: New design

 

Oops you already did i didn’t see till i enlarged the pics

Nice

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley
Sent: Thursday, 4 May 2017 3:36 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: New design

 

That’s great curt can you show the Rosetta that made that pattern

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE
Sent: Thursday, 4 May 2017 3:23 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New design

 

Just another one on the mill.

C.A.G.

 

  _  

From: "CURTIS GEORGE" <curtgeo...@wowway.com>
To: legacy-ornamental-mills@googlegroups.com
Sent: Thursday, May 4, 2017 1:17:11 AM
Subject: Re: New design

 

 

HI Bill

No but you are close. its my  home made jig that I am calling the Rose Fol

RE: New design

[Bill Bulkeley]

I like that side reading bit in your pic is it magnates ? how would the pattern 
go with a 90 degree  V side reeding bit?

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE
Sent: Sunday, 7 May 2017 12:09 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New design

 

I think so? but at this time I just have not figured out how to do it,yet. 

I was hoping that with a different router bit will make it more pronounced? 
(and that still might be... perhaps a smaller cutter?) Tomorrow I am going to 
try it with a side fluting cutter bit.

If that doesn't work, I think its more the template/rosette that needs to be 
bigger. or perhaps a finer follower...?

I wish that I knew? 

I am having fun, exploring new ideas, and different methods. All the I can say 
now is, Those OLD DUDES had some very real smarts...( the OT guys.) ;-) If a 
man could do in back in the late 1700's. Im sure that, with a little work, I 
should be able to at the very least understand how to get this done. ;-)

 

I want to be fully honest with everyone here, I would like you all to help me. 
Im sure someone out there could, or perhaps as a part of a collective we could 
do some Really Cool stuff with our Legacy's

At least that's part of my goal.  

Have a good night.

 

C.A.G.

 

  _  

From: "Bill Bulkeley" <bulke...@mmnet.com.au>
To: legacy-ornamental-mills@googlegroups.com
Sent: Saturday, May 6, 2017 9:12:09 PM
Subject: RE: New design

 

It’s nice is it possible to get the pattern in the flute to stand out a little 
more? . I think that would really make it pop

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE
Sent: Sunday, 7 May 2017 8:55 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New design

 

Hi Bill

I agree here is the first thing, that I tried it out on today.  Please let me 
know what you think?

 

C.A.G.

 

  _  

From: "Bill Bulkeley" <bulke...@mmnet.com.au>
To: legacy-ornamental-mills@googlegroups.com
Sent: Saturday, May 6, 2017 6:25:21 PM
Subject: RE: New design

 

It sure is a different and unique pattern something defiantly to keep to be 
used on future projects 

 

Bill  

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE
Sent: Sunday, 7 May 2017 6:36 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New design

 

Hello Everyone

Never give up! today's play time turned out something that I will be using more 
in the future. ;-)  

 

Its time of the Happy Dance!!! 

 

C.A.G.

 

  _  

From: "CURTIS GEORGE" <curtgeo...@wowway.com>
To: legacy-ornamental-mills@googlegroups.com
Sent: Friday, May 5, 2017 9:50:09 AM
Subject: Re: New design

 

Thank you.

The idea is to get the most of of the Legacy, I started looking as some other 
Ornamental turning equipment, trying to figure out different ways to make 
something different, I found an Ornamental slide rest in one of my Holtzappffel 
turning books.

The concept of template following was made in the design of the Legacy, but how 
could I get more from a template then just following a straight line?  

Since Tim found the Atkinson"s reciprocating jig (which became the Wave 
attachment) I figured that the two concepts were close enough to each-other to 
be useful on the Legacy.

I am still playing around with different shapes and sizes of templates. I am 
finding the simpler template shapes work best, Oval,triangle,square, hart shape 
... work nicely, but more Ornamental (detailed patterns like a rose lathe uses) 
dose not work well with this concept.

Now what I am also looking at is , different types of cuts as well. example 
cutting form the side vs  the top. or cutting for off center vs on center...

I am planing to try an off center cut today, My theory is off center with a 
cutter and a more quick changing template, should give me a pumping action look 
(which is more an OT type of looking cut.)

Wish me luck. and I will let you all know how it turns out. ;-)

 

talk to you all more, latter.

C.A.G.

 

  _  

From: "Ccm Ccm" <ccmdesi...@gmail.com>
To: legacy-ornamental-mills@googlegroups.com
Sent: Friday, May 5, 2017 7:21:52 AM
Subject: Re: New design

 

Looks nice, I like the idea

 

On Thursday, May 4, 2017, CURTIS GEORGE <curtgeo...@wowway.com> wrote:





No problems there. ;-)

I can go into more detail latter.  All that I can say at this min. is there are 
a lot of possibility out there .

Im going to hit the hay now.

talk to you more latter.

 

Have a good night.

C.A.G.

 

  _  

From: "Bill Bulkeley" <bulke...@mmnet.com.au>
To: legacy-ornamental-mills@googlegroups.com
Sent: Thursday, May 4, 2017 1:38:59 AM
Subject: RE: New design

 

Oops you already

Re: New design

[Tim]

It would be nice to be able to increase or decrease the amplitude of the 
rossette.  Any ideas?

-Tim


On Saturday, May 6, 2017 at 6:12:19 PM UTC-7, aussiman wrote:
>
> It’s nice is it possible to get the pattern in the flute to stand out a 
> little more? . I think that would really make it pop
>
>  
>
> Bill
>
>  
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *CURTIS GEORGE
> *Sent:* Sunday, 7 May 2017 8:55 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: New design
>
>  
>
> Hi Bill
>
> I agree here is the first thing, that I tried it out on today.  Please let 
> me know what you think?
>
>  
>
> C.A.G.
>
>  
> --
>
> *From: *"Bill Bulkeley" <bulke...@mmnet.com.au>
> *To: *legacy-ornamental-mills@googlegroups.com
> *Sent: *Saturday, May 6, 2017 6:25:21 PM
> *Subject: *RE: New design
>
>  
>
> It sure is a different and unique pattern something defiantly to keep to 
> be used on future projects 
>
>  
>
> Bill  
>
>  
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *CURTIS GEORGE
> *Sent:* Sunday, 7 May 2017 6:36 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* Re: New design
>
>  
>
> Hello Everyone
>
> Never give up! today's play time turned out something that I will be using 
> more in the future. ;-)  
>
>  
>
> Its time of the Happy Dance!!! 
>
>  
>
> C.A.G.
>
>  
> --
>
> *From: *"CURTIS GEORGE" <curtgeo...@wowway.com>
> *To: *legacy-ornamental-mills@googlegroups.com
> *Sent: *Friday, May 5, 2017 9:50:09 AM
> *Subject: *Re: New design
>
>  
>
> Thank you.
>
> The idea is to get the most of of the Legacy, I started looking as some 
> other Ornamental turning equipment, trying to figure out different ways to 
> make something different, I found an Ornamental slide rest in one of my 
> Holtzappffel turning books.
>
> The concept of template following was made in the design of the Legacy, 
> but how could I get more from a template then just following a straight 
> line?  
>
> Since Tim found the Atkinson"s reciprocating jig (which became the Wave 
> attachment) I figured that the two concepts were close enough to each-other 
> to be useful on the Legacy.
>
> I am still playing around with different shapes and sizes of templates. I 
> am finding the simpler template shapes work best, Oval,triangle,square, 
> hart shape ... work nicely, but more Ornamental (detailed patterns like a 
> rose lathe uses) dose not work well with this concept.
>
> Now what I am also looking at is , different types of cuts as well. 
> example cutting form the side vs  the top. or cutting for off center vs on 
> center...
>
> I am planing to try an off center cut today, My theory is off center with 
> a cutter and a more quick changing template, should give me a pumping 
> action look (which is more an OT type of looking cut.)
>
> Wish me luck. and I will let you all know how it turns out. ;-)
>
>  
>
> talk to you all more, latter.
>
> C.A.G.
>
>  
> --
>
> *From: *"Ccm Ccm" <ccmdesi...@gmail.com>
> *To: *legacy-ornamental-mills@googlegroups.com
> *Sent: *Friday, May 5, 2017 7:21:52 AM
> *Subject: *Re: New design
>
>  
>
> Looks nice, I like the idea
>
>  
>
> On Thursday, May 4, 2017, CURTIS GEORGE <curtgeo...@wowway.com> wrote:
>
>
> No problems there. ;-)
>
> I can go into more detail latter.  All that I can say at this min. is 
> there are a lot of possibility out there .
>
> Im going to hit the hay now.
>
> talk to you more latter.
>
>  
>
> Have a good night.
>
> C.A.G.
>
>  
> --
>
> *From: *"Bill Bulkeley" <bulke...@mmnet.com.au>
> *To: *legacy-ornamental-mills@googlegroups.com
> *Sent: *Thursday, May 4, 2017 1:38:59 AM
> *Subject: *RE: New design
>
>  
>
> Oops you already did i didn’t see till i enlarged the pics
>
> Nice
>
>  
>
> Bill
>
>  
>
> *From:* legacy-ornamental-mills@googlegroups.com [mailto:
> legacy-ornamental-mills@googlegroups.com] *On Behalf Of *Bill Bulkeley
> *Sent:* Thursday, 4 May 2017 3:36 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: New design
>
>  
>
> That’s great curt can you show the Rosetta that made that pattern
>
> Bill
>
>  
>
> *From:* legacy-ornamental-mills@go

Re: New design

[artmarbles]

Curt, that link that you are pointing to is from an author that is still alive. 
His name is John Edwards and the book is very enlightening. Please see his 
website for more information: http://www.ornamentalturning.co.uk/ 

Max, the sharing of copyrighted legacy material is not encouraged in any manner 
outside of this group. I have an agreement with Legacy that limit it's 
distribution. More details will be provided in the future. There is also an on 
going task of recovering lost information that is no longer available from 
Legacy. The exchange of money really has nothing to do with the legal sharing. 

-Tim 


From: "CURTIS GEORGE" <curtgeo...@wowway.com> 
To: legacy-ornamental-mills@googlegroups.com 
Sent: Saturday, May 6, 2017 6:11:43 PM 
Subject: Re: New design 

http://www.ornamentalturning.info/FILES/01-Holtz%20Vol.VI%202nd%20Ed.%20Part%201-%20Chapter%20Intros.pdf
 this link has some neat ideas! 

C.A.G. 

- Original Message -

From: "MAX LATHAM" <ma...@hotmail.com> 
To: legacy-ornamental-mills@googlegroups.com 
Sent: Saturday, May 6, 2017 7:02:45 PM 
Subject: Re: New design 



A beautiful application ! 

I have "The Lathe" Holtzappffel and think it can be shared if no money changes 
hands. 

Likewise almost all the Legacy instructions can be shared via DVD, again 
without fund transfer? 

any one know for sure? 


max 



From: legacy-ornamental-mills@googlegroups.com 
<legacy-ornamental-mills@googlegroups.com> on behalf of CURTIS GEORGE 
<curtgeo...@wowway.com> 
Sent: Saturday, May 6, 2017 5:55 PM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: Re: New design 
Hi Bill 
I agree here is the first thing, that I tried it out on today. Please let me 
know what you think? 

C.A.G. 

- Original Message -

From: "Bill Bulkeley" <bulke...@mmnet.com.au> 
To: legacy-ornamental-mills@googlegroups.com 
Sent: Saturday, May 6, 2017 6:25:21 PM 
Subject: RE: New design 



It sure is a different and unique pattern something defiantly to keep to be 
used on future projects 



Bill 




From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE 
Sent: Sunday, 7 May 2017 6:36 AM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: Re: New design 





Hello Everyone 


Never give up! today's play time turned out something that I will be using more 
in the future. ;-) 





Its time of the Happy Dance!!! 





C.A.G. 



- Original Message -



From: "CURTIS GEORGE" <curtgeo...@wowway.com> 
To: legacy-ornamental-mills@googlegroups.com 
Sent: Friday, May 5, 2017 9:50:09 AM 
Subject: Re: New design 





Thank you. 


The idea is to get the most of of the Legacy, I started looking as some other 
Ornamental turning equipment, trying to figure out different ways to make 
something different, I found an Ornamental slide rest in one of my Holtzappffel 
turning books. 


The concept of template following was made in the design of the Legacy, but how 
could I get more from a template then just following a straight line? 


Since Tim found the Atkinson"s reciprocating jig (which became the Wave 
attachment) I figured that the two concepts were close enough to each-other to 
be useful on the Legacy. 


I am still playing around with different shapes and sizes of templates. I am 
finding the simpler template shapes work best, Oval,triangle,square, hart shape 
... work nicely, but more Ornamental (detailed patterns like a rose lathe uses) 
dose not work well with this concept. 


Now what I am also looking at is , different types of cuts as well. example 
cutting form the side vs the top. or cutting for off center vs on center... 


I am planing to try an off center cut today, My theory is off center with a 
cutter and a more quick changing template, should give me a pumping action look 
(which is more an OT type of looking cut.) 


Wish me luck. and I will let you all know how it turns out. ;-) 





talk to you all more, latter. 


C.A.G. 



- Original Message -



From: "Ccm Ccm" <ccmdesi...@gmail.com> 
To: legacy-ornamental-mills@googlegroups.com 
Sent: Friday, May 5, 2017 7:21:52 AM 
Subject: Re: New design 





Looks nice, I like the idea 





On Thursday, May 4, 2017, CURTIS GEORGE < curtgeo...@wowway.com > wrote: 



No problems there. ;-) 


I can go into more detail latter. All that I can say at this min. is there are 
a lot of possibility out there . 


Im going to hit the hay now. 


talk to you more latter. 





Have a good night. 


C.A.G. 






From: "Bill Bulkeley" < bulke...@mmnet.com.au > 
To: legacy-ornamental-mills@googlegroups.com 
Sent: Thursday, May 4, 2017 1:38:59 AM 
Subject: RE: New design 





Oops you already did i didn’t see till i enlarged the pics 

Nice 



Bill 




From: legacy-ornamental-mills@googlegroups.com [mailto: 
legacy-ornamental-mill

Re: New design

[CURTIS GEORGE]

I think so? but at this time I just have not figured out how to do it,yet. 
I was hoping that with a different router bit will make it more pronounced? 
(and that still might be... perhaps a smaller cutter?) Tomorrow I am going to 
try it with a side fluting cutter bit. 
If that doesn't work, I think its more the template/rosette that needs to be 
bigger. or perhaps a finer follower...? 
I wish that I knew? 
I am having fun, exploring new ideas, and different methods. All the I can say 
now is, Those OLD DUDES had some very real smarts...( the OT guys.) ;-) If a 
man could do in back in the late 1700's. Im sure that, with a little work, I 
should be able to at the very least understand how to get this done. ;-) 

I want to be fully honest with everyone here, I would like you all to help me. 
Im sure someone out there could, or perhaps as a part of a collective we could 
do some Really Cool stuff with our Legacy's 
At least that's part of my goal. 
Have a good night. 

C.A.G. 

- Original Message -

From: "Bill Bulkeley" <bulke...@mmnet.com.au> 
To: legacy-ornamental-mills@googlegroups.com 
Sent: Saturday, May 6, 2017 9:12:09 PM 
Subject: RE: New design 



It’s nice is it possible to get the pattern in the flute to stand out a little 
more? . I think that would really make it pop 



Bill 




From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE 
Sent: Sunday, 7 May 2017 8:55 AM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: Re: New design 





Hi Bill 


I agree here is the first thing, that I tried it out on today. Please let me 
know what you think? 





C.A.G. 



- Original Message -



From: "Bill Bulkeley" <bulke...@mmnet.com.au> 
To: legacy-ornamental-mills@googlegroups.com 
Sent: Saturday, May 6, 2017 6:25:21 PM 
Subject: RE: New design 





It sure is a different and unique pattern something defiantly to keep to be 
used on future projects 



Bill 




From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE 
Sent: Sunday, 7 May 2017 6:36 AM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: Re: New design 





Hello Everyone 


Never give up! today's play time turned out something that I will be using more 
in the future. ;-) 





Its time of the Happy Dance!!! 





C.A.G. 






From: "CURTIS GEORGE" <curtgeo...@wowway.com> 
To: legacy-ornamental-mills@googlegroups.com 
Sent: Friday, May 5, 2017 9:50:09 AM 
Subject: Re: New design 





Thank you. 


The idea is to get the most of of the Legacy, I started looking as some other 
Ornamental turning equipment, trying to figure out different ways to make 
something different, I found an Ornamental slide rest in one of my Holtzappffel 
turning books. 


The concept of template following was made in the design of the Legacy, but how 
could I get more from a template then just following a straight line? 


Since Tim found the Atkinson"s reciprocating jig (which became the Wave 
attachment) I figured that the two concepts were close enough to each-other to 
be useful on the Legacy. 


I am still playing around with different shapes and sizes of templates. I am 
finding the simpler template shapes work best, Oval,triangle,square, hart shape 
... work nicely, but more Ornamental (detailed patterns like a rose lathe uses) 
dose not work well with this concept. 


Now what I am also looking at is , different types of cuts as well. example 
cutting form the side vs the top. or cutting for off center vs on center... 


I am planing to try an off center cut today, My theory is off center with a 
cutter and a more quick changing template, should give me a pumping action look 
(which is more an OT type of looking cut.) 


Wish me luck. and I will let you all know how it turns out. ;-) 





talk to you all more, latter. 


C.A.G. 






From: "Ccm Ccm" <ccmdesi...@gmail.com> 
To: legacy-ornamental-mills@googlegroups.com 
Sent: Friday, May 5, 2017 7:21:52 AM 
Subject: Re: New design 





Looks nice, I like the idea 





On Thursday, May 4, 2017, CURTIS GEORGE < curtgeo...@wowway.com > wrote: 




No problems there. ;-) 


I can go into more detail latter. All that I can say at this min. is there are 
a lot of possibility out there . 


Im going to hit the hay now. 


talk to you more latter. 





Have a good night. 


C.A.G. 






From: "Bill Bulkeley" < bulke...@mmnet.com.au > 
To: legacy-ornamental-mills@googlegroups.com 
Sent: Thursday, May 4, 2017 1:38:59 AM 
Subject: RE: New design 





Oops you already did i didn’t see till i enlarged the pics 

Nice 



Bill 




From: legacy-ornamental-mills@googlegroups.com [mailto: 
legacy-ornamental-mills@googlegroups.com ] On Behalf Of Bill Bulkeley 
Sent: Thursday, 4 May 2017 3:36 PM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: R

RE: New design

[Bill Bulkeley]

It’s nice is it possible to get the pattern in the flute to stand out a little 
more? . I think that would really make it pop

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE
Sent: Sunday, 7 May 2017 8:55 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New design

 

Hi Bill

I agree here is the first thing, that I tried it out on today.  Please let me 
know what you think?

 

C.A.G.

 

  _  

From: "Bill Bulkeley" <bulke...@mmnet.com.au>
To: legacy-ornamental-mills@googlegroups.com
Sent: Saturday, May 6, 2017 6:25:21 PM
Subject: RE: New design

 

It sure is a different and unique pattern something defiantly to keep to be 
used on future projects 

 

Bill  

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE
Sent: Sunday, 7 May 2017 6:36 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New design

 

Hello Everyone

Never give up! today's play time turned out something that I will be using more 
in the future. ;-)  

 

Its time of the Happy Dance!!! 

 

C.A.G.

 

  _  

From: "CURTIS GEORGE" <curtgeo...@wowway.com>
To: legacy-ornamental-mills@googlegroups.com
Sent: Friday, May 5, 2017 9:50:09 AM
Subject: Re: New design

 

Thank you.

The idea is to get the most of of the Legacy, I started looking as some other 
Ornamental turning equipment, trying to figure out different ways to make 
something different, I found an Ornamental slide rest in one of my Holtzappffel 
turning books.

The concept of template following was made in the design of the Legacy, but how 
could I get more from a template then just following a straight line?  

Since Tim found the Atkinson"s reciprocating jig (which became the Wave 
attachment) I figured that the two concepts were close enough to each-other to 
be useful on the Legacy.

I am still playing around with different shapes and sizes of templates. I am 
finding the simpler template shapes work best, Oval,triangle,square, hart shape 
... work nicely, but more Ornamental (detailed patterns like a rose lathe uses) 
dose not work well with this concept.

Now what I am also looking at is , different types of cuts as well. example 
cutting form the side vs  the top. or cutting for off center vs on center...

I am planing to try an off center cut today, My theory is off center with a 
cutter and a more quick changing template, should give me a pumping action look 
(which is more an OT type of looking cut.)

Wish me luck. and I will let you all know how it turns out. ;-)

 

talk to you all more, latter.

C.A.G.

 

  _  

From: "Ccm Ccm" <ccmdesi...@gmail.com>
To: legacy-ornamental-mills@googlegroups.com
Sent: Friday, May 5, 2017 7:21:52 AM
Subject: Re: New design

 

Looks nice, I like the idea

 

On Thursday, May 4, 2017, CURTIS GEORGE <curtgeo...@wowway.com> wrote:




No problems there. ;-)

I can go into more detail latter.  All that I can say at this min. is there are 
a lot of possibility out there .

Im going to hit the hay now.

talk to you more latter.

 

Have a good night.

C.A.G.

 

  _  

From: "Bill Bulkeley" <bulke...@mmnet.com.au>
To: legacy-ornamental-mills@googlegroups.com
Sent: Thursday, May 4, 2017 1:38:59 AM
Subject: RE: New design

 

Oops you already did i didn’t see till i enlarged the pics

Nice

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley
Sent: Thursday, 4 May 2017 3:36 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: New design

 

That’s great curt can you show the Rosetta that made that pattern

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE
Sent: Thursday, 4 May 2017 3:23 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New design

 

Just another one on the mill.

C.A.G.

 

  _  

From: "CURTIS GEORGE" <curtgeo...@wowway.com>
To: legacy-ornamental-mills@googlegroups.com
Sent: Thursday, May 4, 2017 1:17:11 AM
Subject: Re: New design

 

 

HI Bill

No but you are close. its my  home made jig that I am calling the Rose Follower 
. I used a 1/8" bull nose bit. and as you can see in the photo, I am playing 
around with an oval shaped pattern at this time, Switching the pattern/book 
marking. is much easier to do with this jig.

 I just was looking for something a little different. so far the hart shape is 
my favorite. different patterns make different designs.

 

more latter.

C.A.G.

  _  

From: "Bill Bulkeley" <bulke...@mmnet.com.au>
To: legacy-ornamental-mills@googlegroups.com
Sent: Thursday, May 4, 2017 12:49:09 AM
Subject: RE: New design

 

Nice done with the wave attachment in left and right hand directions ?

Re: New design

[CURTIS GEORGE]

http://www.ornamentalturning.info/FILES/01-Holtz%20Vol.VI%202nd%20Ed.%20Part%201-%20Chapter%20Intros.pdf
 this link has some neat ideas! 

C.A.G. 

- Original Message -

From: "MAX LATHAM" <ma...@hotmail.com> 
To: legacy-ornamental-mills@googlegroups.com 
Sent: Saturday, May 6, 2017 7:02:45 PM 
Subject: Re: New design 



A beautiful application ! 

I have "The Lathe" Holtzappffel and think it can be shared if no money changes 
hands. 

Likewise almost all the Legacy instructions can be shared via DVD, again 
without fund transfer? 

any one know for sure? 


max 



From: legacy-ornamental-mills@googlegroups.com 
<legacy-ornamental-mills@googlegroups.com> on behalf of CURTIS GEORGE 
<curtgeo...@wowway.com> 
Sent: Saturday, May 6, 2017 5:55 PM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: Re: New design 
Hi Bill 
I agree here is the first thing, that I tried it out on today. Please let me 
know what you think? 

C.A.G. 

- Original Message -

From: "Bill Bulkeley" <bulke...@mmnet.com.au> 
To: legacy-ornamental-mills@googlegroups.com 
Sent: Saturday, May 6, 2017 6:25:21 PM 
Subject: RE: New design 



It sure is a different and unique pattern something defiantly to keep to be 
used on future projects 



Bill 




From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE 
Sent: Sunday, 7 May 2017 6:36 AM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: Re: New design 





Hello Everyone 


Never give up! today's play time turned out something that I will be using more 
in the future. ;-) 





Its time of the Happy Dance!!! 





C.A.G. 



- Original Message -



From: "CURTIS GEORGE" <curtgeo...@wowway.com> 
To: legacy-ornamental-mills@googlegroups.com 
Sent: Friday, May 5, 2017 9:50:09 AM 
Subject: Re: New design 





Thank you. 


The idea is to get the most of of the Legacy, I started looking as some other 
Ornamental turning equipment, trying to figure out different ways to make 
something different, I found an Ornamental slide rest in one of my Holtzappffel 
turning books. 


The concept of template following was made in the design of the Legacy, but how 
could I get more from a template then just following a straight line? 


Since Tim found the Atkinson"s reciprocating jig (which became the Wave 
attachment) I figured that the two concepts were close enough to each-other to 
be useful on the Legacy. 


I am still playing around with different shapes and sizes of templates. I am 
finding the simpler template shapes work best, Oval,triangle,square, hart shape 
... work nicely, but more Ornamental (detailed patterns like a rose lathe uses) 
dose not work well with this concept. 


Now what I am also looking at is , different types of cuts as well. example 
cutting form the side vs the top. or cutting for off center vs on center... 


I am planing to try an off center cut today, My theory is off center with a 
cutter and a more quick changing template, should give me a pumping action look 
(which is more an OT type of looking cut.) 


Wish me luck. and I will let you all know how it turns out. ;-) 





talk to you all more, latter. 


C.A.G. 



- Original Message -



From: "Ccm Ccm" <ccmdesi...@gmail.com> 
To: legacy-ornamental-mills@googlegroups.com 
Sent: Friday, May 5, 2017 7:21:52 AM 
Subject: Re: New design 





Looks nice, I like the idea 





On Thursday, May 4, 2017, CURTIS GEORGE < curtgeo...@wowway.com > wrote: 



No problems there. ;-) 


I can go into more detail latter. All that I can say at this min. is there are 
a lot of possibility out there . 


Im going to hit the hay now. 


talk to you more latter. 





Have a good night. 


C.A.G. 






From: "Bill Bulkeley" < bulke...@mmnet.com.au > 
To: legacy-ornamental-mills@googlegroups.com 
Sent: Thursday, May 4, 2017 1:38:59 AM 
Subject: RE: New design 





Oops you already did i didn’t see till i enlarged the pics 

Nice 



Bill 




From: legacy-ornamental-mills@googlegroups.com [mailto: 
legacy-ornamental-mills@googlegroups.com ] On Behalf Of Bill Bulkeley 
Sent: Thursday, 4 May 2017 3:36 PM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: RE: New design 




That’s great curt can you show the Rosetta that made that pattern 

Bill 




From: legacy-ornamental-mills@googlegroups.com [mailto: 
legacy-ornamental-mills@googlegroups.com ] On Behalf Of CURTIS GEORGE 
Sent: Thursday, 4 May 2017 3:23 PM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: Re: New design 





Just another one on the mill. 


C.A.G. 






From: "CURTIS GEORGE" < curtgeo...@wowway.com > 
To: legacy-ornamental-mills@googlegroups.com 
Sent: Thursday, May 4, 2017 1:17:11 AM 
Subject: Re: New design 








HI Bill 


No but you are close. its my home made jig that I am calling the Rose Follow

Re: New design

[MAX LATHAM]

A beautiful application !

I have "The Lathe" Holtzappffel and think it can be shared if no money changes 
hands.

Likewise almost all the Legacy instructions can be shared via DVD, again 
without  fund transfer?

 any one know for sure?

max



From: legacy-ornamental-mills@googlegroups.com 
<legacy-ornamental-mills@googlegroups.com> on behalf of CURTIS GEORGE 
<curtgeo...@wowway.com>
Sent: Saturday, May 6, 2017 5:55 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New design

Hi Bill
I agree here is the first thing, that I tried it out on today.  Please let me 
know what you think?

C.A.G.


From: "Bill Bulkeley" <bulke...@mmnet.com.au>
To: legacy-ornamental-mills@googlegroups.com
Sent: Saturday, May 6, 2017 6:25:21 PM
Subject: RE: New design

It sure is a different and unique pattern something defiantly to keep to be 
used on future projects

Bill

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE
Sent: Sunday, 7 May 2017 6:36 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New design

Hello Everyone
Never give up! today's play time turned out something that I will be using more 
in the future. ;-)

Its time of the Happy Dance!!!

C.A.G.


From: "CURTIS GEORGE" <curtgeo...@wowway.com>
To: legacy-ornamental-mills@googlegroups.com
Sent: Friday, May 5, 2017 9:50:09 AM
Subject: Re: New design

Thank you.
The idea is to get the most of of the Legacy, I started looking as some other 
Ornamental turning equipment, trying to figure out different ways to make 
something different, I found an Ornamental slide rest in one of my Holtzappffel 
turning books.
The concept of template following was made in the design of the Legacy, but how 
could I get more from a template then just following a straight line?
Since Tim found the Atkinson"s reciprocating jig (which became the Wave 
attachment) I figured that the two concepts were close enough to each-other to 
be useful on the Legacy.
I am still playing around with different shapes and sizes of templates. I am 
finding the simpler template shapes work best, Oval,triangle,square, hart shape 
... work nicely, but more Ornamental (detailed patterns like a rose lathe uses) 
dose not work well with this concept.
Now what I am also looking at is , different types of cuts as well. example 
cutting form the side vs  the top. or cutting for off center vs on center...
I am planing to try an off center cut today, My theory is off center with a 
cutter and a more quick changing template, should give me a pumping action look 
(which is more an OT type of looking cut.)
Wish me luck. and I will let you all know how it turns out. ;-)

talk to you all more, latter.
C.A.G.


From: "Ccm Ccm" <ccmdesi...@gmail.com>
To: legacy-ornamental-mills@googlegroups.com
Sent: Friday, May 5, 2017 7:21:52 AM
Subject: Re: New design

Looks nice, I like the idea

On Thursday, May 4, 2017, CURTIS GEORGE 
<curtgeo...@wowway.com<mailto:curtgeo...@wowway.com>> wrote:

No problems there. ;-)
I can go into more detail latter.  All that I can say at this min. is there are 
a lot of possibility out there .
Im going to hit the hay now.
talk to you more latter.

Have a good night.
C.A.G.


From: "Bill Bulkeley" 
<bulke...@mmnet.com.au<JAVASCRIPT-BLOCKED_e(%7B%7D,'cvml','bulke...@mmnet.com.au');>>
To: 
legacy-ornamental-mills@googlegroups.com<JAVASCRIPT-BLOCKED_e(%7B%7D,'cvml','legacy-ornamental-mills@googlegroups.com');>
Sent: Thursday, May 4, 2017 1:38:59 AM
Subject: RE: New design

Oops you already did i didn’t see till i enlarged the pics
Nice

Bill

From: 
legacy-ornamental-mills@googlegroups.com<JAVASCRIPT-BLOCKED_e(%7B%7D,'cvml','legacy-ornamental-mills@googlegroups.com');>
 
[mailto:legacy-ornamental-mills@googlegroups.com<JAVASCRIPT-BLOCKED_e(%7B%7D,'cvml','legacy-ornamental-mills@googlegroups.com');>]
 On Behalf Of Bill Bulkeley
Sent: Thursday, 4 May 2017 3:36 PM
To: 
legacy-ornamental-mills@googlegroups.com<JAVASCRIPT-BLOCKED_e(%7B%7D,'cvml','legacy-ornamental-mills@googlegroups.com');>
Subject: RE: New design

That’s great curt can you show the Rosetta that made that pattern
Bill

From: 
legacy-ornamental-mills@googlegroups.com<JAVASCRIPT-BLOCKED_e(%7B%7D,'cvml','legacy-ornamental-mills@googlegroups.com');>
 
[mailto:legacy-ornamental-mills@googlegroups.com<JAVASCRIPT-BLOCKED_e(%7B%7D,'cvml','legacy-ornamental-mills@googlegroups.com');>]
 On Behalf Of CURTIS GEORGE
Sent: Thursday, 4 May 2017 3:23 PM
To: 
legacy-ornamental-mills@googlegroups.com<JAVASCRIPT-BLOCKED_e(%7B%7D,'cvml','legacy-ornamental-mills@googlegroups.com');>
Subject: Re: New design

Just another one on the mill.
C.A.G.

_

RE: New design

[Bill Bulkeley]

It sure is a different and unique pattern something defiantly to keep to be 
used on future projects 

 

Bill  

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE
Sent: Sunday, 7 May 2017 6:36 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New design

 

Hello Everyone

Never give up! today's play time turned out something that I will be using more 
in the future. ;-)  

 

Its time of the Happy Dance!!! 

 

C.A.G.

 

  _  

From: "CURTIS GEORGE" <curtgeo...@wowway.com>
To: legacy-ornamental-mills@googlegroups.com
Sent: Friday, May 5, 2017 9:50:09 AM
Subject: Re: New design

 

Thank you.

The idea is to get the most of of the Legacy, I started looking as some other 
Ornamental turning equipment, trying to figure out different ways to make 
something different, I found an Ornamental slide rest in one of my Holtzappffel 
turning books.

The concept of template following was made in the design of the Legacy, but how 
could I get more from a template then just following a straight line?  

Since Tim found the Atkinson"s reciprocating jig (which became the Wave 
attachment) I figured that the two concepts were close enough to each-other to 
be useful on the Legacy.

I am still playing around with different shapes and sizes of templates. I am 
finding the simpler template shapes work best, Oval,triangle,square, hart shape 
... work nicely, but more Ornamental (detailed patterns like a rose lathe uses) 
dose not work well with this concept.

Now what I am also looking at is , different types of cuts as well. example 
cutting form the side vs  the top. or cutting for off center vs on center...

I am planing to try an off center cut today, My theory is off center with a 
cutter and a more quick changing template, should give me a pumping action look 
(which is more an OT type of looking cut.)

Wish me luck. and I will let you all know how it turns out. ;-)

 

talk to you all more, latter.

C.A.G.

 

  _  

From: "Ccm Ccm" <ccmdesi...@gmail.com>
To: legacy-ornamental-mills@googlegroups.com
Sent: Friday, May 5, 2017 7:21:52 AM
Subject: Re: New design

 

Looks nice, I like the idea

 

On Thursday, May 4, 2017, CURTIS GEORGE <curtgeo...@wowway.com> wrote:



No problems there. ;-)

I can go into more detail latter.  All that I can say at this min. is there are 
a lot of possibility out there .

Im going to hit the hay now.

talk to you more latter.

 

Have a good night.

C.A.G.

 

  _  

From: "Bill Bulkeley" <bulke...@mmnet.com.au>
To: legacy-ornamental-mills@googlegroups.com
Sent: Thursday, May 4, 2017 1:38:59 AM
Subject: RE: New design

 

Oops you already did i didn’t see till i enlarged the pics

Nice

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley
Sent: Thursday, 4 May 2017 3:36 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: New design

 

That’s great curt can you show the Rosetta that made that pattern

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE
Sent: Thursday, 4 May 2017 3:23 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New design

 

Just another one on the mill.

C.A.G.

 

  _  

From: "CURTIS GEORGE" <curtgeo...@wowway.com>
To: legacy-ornamental-mills@googlegroups.com
Sent: Thursday, May 4, 2017 1:17:11 AM
Subject: Re: New design

 

 

HI Bill

No but you are close. its my  home made jig that I am calling the Rose Follower 
. I used a 1/8" bull nose bit. and as you can see in the photo, I am playing 
around with an oval shaped pattern at this time, Switching the pattern/book 
marking. is much easier to do with this jig.

 I just was looking for something a little different. so far the hart shape is 
my favorite. different patterns make different designs.

 

more latter.

C.A.G.

  _  

From: "Bill Bulkeley" <bulke...@mmnet.com.au>
To: legacy-ornamental-mills@googlegroups.com
Sent: Thursday, May 4, 2017 12:49:09 AM
Subject: RE: New design

 

Nice done with the wave attachment in left and right hand directions ?

Or am I totally wrong,  looks good I like it also what router bit?

 

Bill

 

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE
Sent: Thursday, 4 May 2017 2:30 PM
To: Legacy-Ornamental-Mills
Subject: New design

 

Just wanted to know what  you all think?

This is just a test piece, I think it will become a pencil holder???  I just 
wanted to try something new. 

Any and All input is as always welcome!  ;-)

 

C.A.G.

 


 
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<http://www.avg.com/email-signa

Re: New design

[CURTIS GEORGE]

Hello everyone. 
I just got home form work. 
today's Legacy experiments did not work out as expected... But I did learn 
something new. (so I guess it was not a failure.) ;-) 

I hope everyone has a Great Weekend. talk to you all more tomorrow. 
Good night. 
C.A.G. 

- Original Message -

From: "CURTIS GEORGE" <curtgeo...@wowway.com> 
To: legacy-ornamental-mills@googlegroups.com 
Sent: Friday, May 5, 2017 9:50:09 AM 
Subject: Re: New design 

Thank you. 
The idea is to get the most of of the Legacy, I started looking as some other 
Ornamental turning equipment, trying to figure out different ways to make 
something different, I found an Ornamental slide rest in one of my Holtzappffel 
turning books. 
The concept of template following was made in the design of the Legacy, but how 
could I get more from a template then just following a straight line? 
Since Tim found the Atkinson"s reciprocating jig (which became the Wave 
attachment) I figured that the two concepts were close enough to each-other to 
be useful on the Legacy. 
I am still playing around with different shapes and sizes of templates. I am 
finding the simpler template shapes work best, Oval,triangle,square, hart shape 
... work nicely, but more Ornamental (detailed patterns like a rose lathe uses) 
dose not work well with this concept. 
Now what I am also looking at is , different types of cuts as well. example 
cutting form the side vs the top. or cutting for off center vs on center... 
I am planing to try an off center cut today, My theory is off center with a 
cutter and a more quick changing template, should give me a pumping action look 
(which is more an OT type of looking cut.) 
Wish me luck. and I will let you all know how it turns out. ;-) 

talk to you all more, latter. 
C.A.G. 

- Original Message -

From: "Ccm Ccm" <ccmdesi...@gmail.com> 
To: legacy-ornamental-mills@googlegroups.com 
Sent: Friday, May 5, 2017 7:21:52 AM 
Subject: Re: New design 

Looks nice, I like the idea 

On Thursday, May 4, 2017, CURTIS GEORGE < curtgeo...@wowway.com > wrote: 



No problems there. ;-) 
I can go into more detail latter. All that I can say at this min. is there are 
a lot of possibility out there . 
Im going to hit the hay now. 
talk to you more latter. 

Have a good night. 
C.A.G. 


From: "Bill Bulkeley" < bulke...@mmnet.com.au > 
To: legacy-ornamental-mills@googlegroups.com 
Sent: Thursday, May 4, 2017 1:38:59 AM 
Subject: RE: New design 



Oops you already did i didn’t see till i enlarged the pics 

Nice 



Bill 




From: legacy-ornamental-mills@googlegroups.com [mailto: 
legacy-ornamental-mills@googlegroups.com ] On Behalf Of Bill Bulkeley 
Sent: Thursday, 4 May 2017 3:36 PM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: RE: New design 




That’s great curt can you show the Rosetta that made that pattern 

Bill 




From: legacy-ornamental-mills@googlegroups.com [mailto: 
legacy-ornamental-mills@googlegroups.com ] On Behalf Of CURTIS GEORGE 
Sent: Thursday, 4 May 2017 3:23 PM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: Re: New design 





Just another one on the mill. 


C.A.G. 






From: "CURTIS GEORGE" < curtgeo...@wowway.com > 
To: legacy-ornamental-mills@googlegroups.com 
Sent: Thursday, May 4, 2017 1:17:11 AM 
Subject: Re: New design 








HI Bill 


No but you are close. its my home made jig that I am calling the Rose Follower 
. I used a 1/8" bull nose bit. and as you can see in the photo, I am playing 
around with an oval shaped pattern at this time, Switching the pattern/book 
marking. is much easier to do with this jig. 


I just was looking for something a little different. so far the hart shape is 
my favorite. different patterns make different designs. 





more latter. 


C.A.G. 



From: "Bill Bulkeley" < bulke...@mmnet.com.au > 
To: legacy-ornamental-mills@googlegroups.com 
Sent: Thursday, May 4, 2017 12:49:09 AM 
Subject: RE: New design 





Nice done with the wave attachment in left and right hand directions ? 

Or am I totally wrong, looks good I like it also what router bit? 



Bill 






From: legacy-ornamental-mills@googlegroups.com [mailto: 
legacy-ornamental-mills@googlegroups.com ] On Behalf Of CURTIS GEORGE 
Sent: Thursday, 4 May 2017 2:30 PM 
To: Legacy-Ornamental-Mills 
Subject: New design 





Just wanted to know what you all think? 


This is just a test piece, I think it will become a pencil holder??? I just 
wanted to try something new. 


Any and All input is as always welcome! ;-) 





C.A.G. 






Virus-free. www.avg.com 


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group. 
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com . 
To post to this group, send email to legacy-ornamental-mills@g

Re: New design

[CURTIS GEORGE]

Thank you. 
The idea is to get the most of of the Legacy, I started looking as some other 
Ornamental turning equipment, trying to figure out different ways to make 
something different, I found an Ornamental slide rest in one of my Holtzappffel 
turning books. 
The concept of template following was made in the design of the Legacy, but how 
could I get more from a template then just following a straight line? 
Since Tim found the Atkinson"s reciprocating jig (which became the Wave 
attachment) I figured that the two concepts were close enough to each-other to 
be useful on the Legacy. 
I am still playing around with different shapes and sizes of templates. I am 
finding the simpler template shapes work best, Oval,triangle,square, hart shape 
... work nicely, but more Ornamental (detailed patterns like a rose lathe uses) 
dose not work well with this concept. 
Now what I am also looking at is , different types of cuts as well. example 
cutting form the side vs the top. or cutting for off center vs on center... 
I am planing to try an off center cut today, My theory is off center with a 
cutter and a more quick changing template, should give me a pumping action look 
(which is more an OT type of looking cut.) 
Wish me luck. and I will let you all know how it turns out. ;-) 

talk to you all more, latter. 
C.A.G. 

- Original Message -

From: "Ccm Ccm" <ccmdesi...@gmail.com> 
To: legacy-ornamental-mills@googlegroups.com 
Sent: Friday, May 5, 2017 7:21:52 AM 
Subject: Re: New design 

Looks nice, I like the idea 

On Thursday, May 4, 2017, CURTIS GEORGE < curtgeo...@wowway.com > wrote: 



No problems there. ;-) 
I can go into more detail latter. All that I can say at this min. is there are 
a lot of possibility out there . 
Im going to hit the hay now. 
talk to you more latter. 

Have a good night. 
C.A.G. 


From: "Bill Bulkeley" < bulke...@mmnet.com.au > 
To: legacy-ornamental-mills@googlegroups.com 
Sent: Thursday, May 4, 2017 1:38:59 AM 
Subject: RE: New design 



Oops you already did i didn’t see till i enlarged the pics 

Nice 



Bill 




From: legacy-ornamental-mills@googlegroups.com [mailto: 
legacy-ornamental-mills@googlegroups.com ] On Behalf Of Bill Bulkeley 
Sent: Thursday, 4 May 2017 3:36 PM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: RE: New design 




That’s great curt can you show the Rosetta that made that pattern 

Bill 




From: legacy-ornamental-mills@googlegroups.com [mailto: 
legacy-ornamental-mills@googlegroups.com ] On Behalf Of CURTIS GEORGE 
Sent: Thursday, 4 May 2017 3:23 PM 
To: legacy-ornamental-mills@googlegroups.com 
Subject: Re: New design 





Just another one on the mill. 


C.A.G. 






From: "CURTIS GEORGE" < curtgeo...@wowway.com > 
To: legacy-ornamental-mills@googlegroups.com 
Sent: Thursday, May 4, 2017 1:17:11 AM 
Subject: Re: New design 








HI Bill 


No but you are close. its my home made jig that I am calling the Rose Follower 
. I used a 1/8" bull nose bit. and as you can see in the photo, I am playing 
around with an oval shaped pattern at this time, Switching the pattern/book 
marking. is much easier to do with this jig. 


I just was looking for something a little different. so far the hart shape is 
my favorite. different patterns make different designs. 





more latter. 


C.A.G. 



From: "Bill Bulkeley" < bulke...@mmnet.com.au > 
To: legacy-ornamental-mills@googlegroups.com 
Sent: Thursday, May 4, 2017 12:49:09 AM 
Subject: RE: New design 





Nice done with the wave attachment in left and right hand directions ? 

Or am I totally wrong, looks good I like it also what router bit? 



Bill 






From: legacy-ornamental-mills@googlegroups.com [mailto: 
legacy-ornamental-mills@googlegroups.com ] On Behalf Of CURTIS GEORGE 
Sent: Thursday, 4 May 2017 2:30 PM 
To: Legacy-Ornamental-Mills 
Subject: New design 





Just wanted to know what you all think? 


This is just a test piece, I think it will become a pencil holder??? I just 
wanted to try something new. 


Any and All input is as always welcome! ;-) 





C.A.G. 






Virus-free. www.avg.com 


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group. 
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com . 
To post to this group, send email to legacy-ornamental-mills@googlegroups.com . 
Visit this group at https://groups.google.com/group/legacy-ornamental-mills . 
For more options, visit https://groups.google.com/d/optout . 




-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group. 
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com . 
To post to this group, send email to legacy-orname

Re: New design

[Ccm Ccm]

Looks nice, I like the idea

On Thursday, May 4, 2017, CURTIS GEORGE <curtgeo...@wowway.com> wrote:

> No problems there. ;-)
> I can go into more detail latter.  All that I can say at this min. is
> there are a lot of possibility out there .
> Im going to hit the hay now.
> talk to you more latter.
>
> Have a good night.
> C.A.G.
>
> --
> *From: *"Bill Bulkeley" <bulke...@mmnet.com.au
> <javascript:_e(%7B%7D,'cvml','bulke...@mmnet.com.au');>>
> *To: *legacy-ornamental-mills@googlegroups.com
> <javascript:_e(%7B%7D,'cvml','legacy-ornamental-mills@googlegroups.com');>
> *Sent: *Thursday, May 4, 2017 1:38:59 AM
> *Subject: *RE: New design
>
> Oops you already did i didn’t see till i enlarged the pics
>
> Nice
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com
> <javascript:_e(%7B%7D,'cvml','legacy-ornamental-mills@googlegroups.com');>
> [mailto:legacy-ornamental-mills@googlegroups.com
> <javascript:_e(%7B%7D,'cvml','legacy-ornamental-mills@googlegroups.com');>]
> *On Behalf Of *Bill Bulkeley
> *Sent:* Thursday, 4 May 2017 3:36 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> <javascript:_e(%7B%7D,'cvml','legacy-ornamental-mills@googlegroups.com');>
> *Subject:* RE: New design
>
>
>
> That’s great curt can you show the Rosetta that made that pattern
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com
> <javascript:_e(%7B%7D,'cvml','legacy-ornamental-mills@googlegroups.com');>
> [mailto:legacy-ornamental-mills@googlegroups.com
> <javascript:_e(%7B%7D,'cvml','legacy-ornamental-mills@googlegroups.com');>]
> *On Behalf Of *CURTIS GEORGE
> *Sent:* Thursday, 4 May 2017 3:23 PM
> *To:* legacy-ornamental-mills@googlegroups.com
> <javascript:_e(%7B%7D,'cvml','legacy-ornamental-mills@googlegroups.com');>
> *Subject:* Re: New design
>
>
>
> Just another one on the mill.
>
> C.A.G.
>
>
> --
>
> *From: *"CURTIS GEORGE" <curtgeo...@wowway.com
> <javascript:_e(%7B%7D,'cvml','curtgeo...@wowway.com');>>
> *To: *legacy-ornamental-mills@googlegroups.com
> <javascript:_e(%7B%7D,'cvml','legacy-ornamental-mills@googlegroups.com');>
> *Sent: *Thursday, May 4, 2017 1:17:11 AM
> *Subject: *Re: New design
>
>
>
>
>
> HI Bill
>
> No but you are close. its my  home made jig that I am calling the Rose
> Follower . I used a 1/8" bull nose bit. and as you can see in the photo, I
> am playing around with an oval shaped pattern at this time, Switching the
> pattern/book marking. is much easier to do with this jig.
>
>  I just was looking for something a little different. so far the hart
> shape is my favorite. different patterns make different designs.
>
>
>
> more latter.
>
> C.A.G.
> --
>
> *From: *"Bill Bulkeley" <bulke...@mmnet.com.au
> <javascript:_e(%7B%7D,'cvml','bulke...@mmnet.com.au');>>
> *To: *legacy-ornamental-mills@googlegroups.com
> <javascript:_e(%7B%7D,'cvml','legacy-ornamental-mills@googlegroups.com');>
> *Sent: *Thursday, May 4, 2017 12:49:09 AM
> *Subject: *RE: New design
>
>
>
> Nice done with the wave attachment in left and right hand directions ?
>
> Or am I totally wrong,  looks good I like it also what router bit?
>
>
>
> Bill
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com
> <javascript:_e(%7B%7D,'cvml','legacy-ornamental-mills@googlegroups.com');>
> [mailto:legacy-ornamental-mills@googlegroups.com
> <javascript:_e(%7B%7D,'cvml','legacy-ornamental-mills@googlegroups.com');>]
> *On Behalf Of *CURTIS GEORGE
> *Sent:* Thursday, 4 May 2017 2:30 PM
> *To:* Legacy-Ornamental-Mills
> *Subject:* New design
>
>
>
> Just wanted to know what  you all think?
>
> This is just a test piece, I think it will become a pencil holder???  I
> just wanted to try something new.
>
> Any and All input is as always welcome!  ;-)
>
>
>
> C.A.G.
>
>
>
>
> <http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>
> Virus-free. www.avg.com
> <http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com
> <javascript:_e(%7B%7D,'cvml','legacy-ornamental-mills%2bunsub

RE: New design

[Bill Bulkeley]

Oops you already did i didn’t see till i enlarged the pics

Nice

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Bill Bulkeley
Sent: Thursday, 4 May 2017 3:36 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: RE: New design

 

That’s great curt can you show the Rosetta that made that pattern

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE
Sent: Thursday, 4 May 2017 3:23 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New design

 

Just another one on the mill.

C.A.G.

 

  _  

From: "CURTIS GEORGE" <curtgeo...@wowway.com>
To: legacy-ornamental-mills@googlegroups.com
Sent: Thursday, May 4, 2017 1:17:11 AM
Subject: Re: New design

 

 

HI Bill

No but you are close. its my  home made jig that I am calling the Rose Follower 
. I used a 1/8" bull nose bit. and as you can see in the photo, I am playing 
around with an oval shaped pattern at this time, Switching the pattern/book 
marking. is much easier to do with this jig.

 I just was looking for something a little different. so far the hart shape is 
my favorite. different patterns make different designs.

 

more latter.

C.A.G.

  _  

From: "Bill Bulkeley" <bulke...@mmnet.com.au>
To: legacy-ornamental-mills@googlegroups.com
Sent: Thursday, May 4, 2017 12:49:09 AM
Subject: RE: New design

 

Nice done with the wave attachment in left and right hand directions ?

Or am I totally wrong,  looks good I like it also what router bit?

 

Bill

 

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE
Sent: Thursday, 4 May 2017 2:30 PM
To: Legacy-Ornamental-Mills
Subject: New design

 

Just wanted to know what  you all think?

This is just a test piece, I think it will become a pencil holder???  I just 
wanted to try something new. 

Any and All input is as always welcome!  ;-)

 

C.A.G.

 


 
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avg.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this

RE: New design

[Bill Bulkeley]

That’s great curt can you show the Rosetta that made that pattern

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE
Sent: Thursday, 4 May 2017 3:23 PM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: New design

 

Just another one on the mill.

C.A.G.

 

  _  

From: "CURTIS GEORGE" <curtgeo...@wowway.com>
To: legacy-ornamental-mills@googlegroups.com
Sent: Thursday, May 4, 2017 1:17:11 AM
Subject: Re: New design

 

 

HI Bill

No but you are close. its my  home made jig that I am calling the Rose Follower 
. I used a 1/8" bull nose bit. and as you can see in the photo, I am playing 
around with an oval shaped pattern at this time, Switching the pattern/book 
marking. is much easier to do with this jig.

 I just was looking for something a little different. so far the hart shape is 
my favorite. different patterns make different designs.

 

more latter.

C.A.G.

  _  

From: "Bill Bulkeley" <bulke...@mmnet.com.au>
To: legacy-ornamental-mills@googlegroups.com
Sent: Thursday, May 4, 2017 12:49:09 AM
Subject: RE: New design

 

Nice done with the wave attachment in left and right hand directions ?

Or am I totally wrong,  looks good I like it also what router bit?

 

Bill

 

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE
Sent: Thursday, 4 May 2017 2:30 PM
To: Legacy-Ornamental-Mills
Subject: New design

 

Just wanted to know what  you all think?

This is just a test piece, I think it will become a pencil holder???  I just 
wanted to try something new. 

Any and All input is as always welcome!  ;-)

 

C.A.G.

 


 
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 

Virus-free.  
<http://www.avg.com/email-signature?utm_medium=email_source=link_campaign=sig-email_content=emailclient>
 www.avg.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

RE: New design

[Bill Bulkeley]

Nice done with the wave attachment in left and right hand directions ?

Or am I totally wrong,  looks good I like it also what router bit?

 

Bill

 

 

From: legacy-ornamental-mills@googlegroups.com 
[mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of CURTIS GEORGE
Sent: Thursday, 4 May 2017 2:30 PM
To: Legacy-Ornamental-Mills
Subject: New design

 

Just wanted to know what  you all think?

This is just a test piece, I think it will become a pencil holder???  I just 
wanted to try something new. 

Any and All input is as always welcome!  ;-)

 

C.A.G.

 


 

 

Virus-free.  

 www.avg.com 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To post to this group, send email to legacy-ornamental-mills@googlegroups.com.
Visit this group at https://groups.google.com/group/legacy-ornamental-mills.
For more options, visit https://groups.google.com/d/optout.