Re: Some Christmas ideas/gifts

[M.W.Foscue]

I have used the TB II Dark with walnut and some other dark woods.
Worked out well.
-Original Message-
From: 
Sent: Dec 15, 2022 9:49 PM
To: 
Subject: Re: Some Christmas ideas/gifts

What color does III dry?  Walnut!

On 12/15/2022 7:44 PM, M.W.Foscue wrote:
Thanks.
Out of curiosity - why TB III for walnut (always)?
I generally have used:
"Original" - only on occasion and even then always for "indoor" stuff.
TB II - for most all my wood gluing that does not need a higher level of 
"waterproofness".
TB III for anything that will have outdoor exposure and anything that may be 
subject to occasional "dunkings" - like a cutting board or a toy "boat".
Mill on!
Mac

-Original Message-
From:  
(mailto:legacy-ornamental-mills@googlegroups.com)
Sent: Dec 15, 2022 8:03 PM
To:  
(mailto:legacy-ornamental-mills@googlegroups.com)
Subject: Re: Some Christmas ideas/gifts

Titebond II  One is too runny for posts.  One is best if you are indoors and 
going to use a roller to apply.  3 is for out doors or if I am gluing Walnut 
anywhere.
On 12/15/2022 3:05 PM, M.W.Foscue wrote:
Mike,

Thanks. 
I figured that that's what those short blocks around the interior were for.

What is your "go to glue" - if these were being installed:
Indoors? __
Out doors? ___

Mill on!
Mac



-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/267fb965-2674-f8c6-b696-54c73d26b4b3%40earthlink.net.

RE: Some Christmas ideas/gifts

[bulkeley]

Well in off home now see ya lololol

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Okla Mike (Liltwisted)
Sent: Friday, 16 December 2022 4:04 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Some Christmas ideas/gifts

 

LOL go big or go home

On 12/14/2022 11:13 PM, 'Curt George' via Legacy Ornamental Mills wrote:

Hello Guys!  (Just got home form work.)

 

Here are a few pix. that Mike sent me, a few year back.  

Just to show the scale he was making back then.  These monsters were and are, 
Much larger then my original intent For Christmas gift ideas.  But like many of 
the posting on the group, Things seem to run there OWN course, To where is 
ends, No one ever knows. ;-) 

 

C.A.G.

On Wednesday, December 14, 2022 at 11:15:57 PM EST, M.W.Foscue  
<mailto:mwfos...@earthlink.net>  wrote: 

 

 

Bill,

Thanks - the pic saved a thousand words.

It's clear how he used the "glue blocks".

Cheers!

Mac


  _  


  _  


-Original Message-
From:  <mailto:legacy-ornamental-mills@googlegroups.com> 

Sent: Dec 14, 2022 3:48 PM
To:  <mailto:legacy-ornamental-mills@googlegroups.com> 

Subject: RE: Some Christmas ideas/gifts

 

.I didn’t use blocks in any bird mouths I ever did I just used band clamps with 
grease proof paper under them 

So the glue wont stick to the strap. 

 

someone smarter than me who has used blocks will have to explain that one

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com>   
<mailto:legacy-ornamental-mills@googlegroups.com> 
 On Behalf Of M.W.Foscue
Sent: Thursday, 15 December 2022 7:06 AM
To: legacy-ornamental-mills@googlegroups.com 
<mailto:legacy-ornamental-mills@googlegroups.com> 
Subject: RE: Some Christmas ideas/gifts

 

Bill,

 

Thanks.  In the write-up by Art and Mike on gluing up birdmouth cuts, one of 
them mentioned use of  "glue blocks"

("... with a larger column of this size each stave needs a .5" by .5"  clamping 
block about .5" from the edge.  Short blocks can break off as there can be 
considerable clamping pressure needed if there is wood movement." )

 

Would you please explain this - and perhaps include a diagram as to what they 
were recommending and where it/they would be attached?

 

Mike - maybe you can chime in as well - since you and Art were the ones in the 
write-up.  Thanks.

 

Thank you.

Mac


  _  


  _  


-Original Message-
From: mailto:legacy-ornamental-mills@googlegroups.com> >
Sent: Dec 14, 2022 1:20 AM
To: 
Subject: RE: Some Christmas ideas/gifts

 

Nice idea curt if anyone has a set of birdmouth router bits they are good for 
making hollow poles

Like the old sailors did good for making bird houses you can also cut them on 
the table saw too

 



 

Bill

 

 

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Wednesday, 14 December 2022 4:06 PM
To: Legacy ornamental mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Some Christmas ideas/gifts

 

These are "NOT" mine, but ones that I found in Facebook. 

These are simple enough that any Legacy user could make these bird houses.

 

Just something to think about.

 

C.A.G.

 

 

https://www.facebook.com/groups/237412350498504/?multi_permalinks=1137337040506026
 
<https://www.facebook.com/groups/237412350498504/?multi_permalinks=1137337040506026&ref=share>
 &ref=share 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com?utm_medium=email&utm_source=footer>
 .

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000301d90f84%2417b46ba0%24471d42e0%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/000301d90f84%2417b46ba0%24471d42e0%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legac

Re: Some Christmas ideas/gifts

[Tim Ziegler]

For sure and you aint even from Texas lol.
Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Thu, Dec 15, 2022 at 11:04 AM Okla Mike (Liltwisted) <
legacym...@iglide.net> wrote:

> LOL go big or go home
> On 12/14/2022 11:13 PM, 'Curt George' via Legacy Ornamental Mills wrote:
>
> Hello Guys!  (Just got home form work.)
>
> Here are a few pix. that Mike sent me, a few year back.
> Just to show the scale he was making back then.  These monsters were and
> are, Much larger then my original intent For Christmas gift ideas.  But
> like many of the posting on the group, Things seem to run there OWN course,
> To where is ends, No one ever knows. ;-)
>
> C.A.G.
> On Wednesday, December 14, 2022 at 11:15:57 PM EST, M.W.Foscue
>   wrote:
>
>
> Bill,
>
> Thanks - the pic saved a thousand words.
>
> It's clear how he used the "glue blocks".
>
> Cheers!
>
> Mac
> --
> ------
>
> -Original Message-
> From: 
> 
> Sent: Dec 14, 2022 3:48 PM
> To: 
> 
> Subject: RE: Some Christmas ideas/gifts
>
>
>
> .I didn’t use blocks in any bird mouths I ever did I just used band clamps
> with grease proof paper under them
>
> So the glue wont stick to the strap.
>
>
>
> someone smarter than me who has used blocks will have to explain that one
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com
> 
>  *On Behalf Of *M.W.Foscue
> *Sent:* Thursday, 15 December 2022 7:06 AM
> *To:* legacy-ornamental-mills@googlegroups.com
> *Subject:* RE: Some Christmas ideas/gifts
>
>
>
> Bill,
>
>
>
> Thanks.  In the write-up by Art and Mike on gluing up birdmouth cuts, one
> of them mentioned use of  "glue blocks"
>
> ("... with a larger column of this size each stave needs a .5" by .5"
> clamping block about .5" from the edge.  Short blocks can break off as
> there can be considerable clamping pressure needed if there is wood
> movement." )
>
>
>
> Would you please explain this - and perhaps include a diagram as to what
> they were recommending and where it/they would be attached?
>
>
>
> Mike - maybe you can chime in as well - since you and Art were the ones in
> the write-up.  Thanks.
>
>
>
> Thank you.
>
> Mac
> --
> --
>
> -Original Message-
> From: 
> Sent: Dec 14, 2022 1:20 AM
> To: 
> Subject: RE: Some Christmas ideas/gifts
>
>
>
> Nice idea curt if anyone has a set of birdmouth router bits they are good
> for making hollow poles
>
> Like the old sailors did good for making bird houses you can also cut them
> on the table saw too
>
>
>
>
>
> Bill
>
>
>
>
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Wednesday, 14 December 2022 4:06 PM
> *To:* Legacy ornamental mills 
> *Subject:* Some Christmas ideas/gifts
>
>
>
> These are "NOT" mine, but ones that I found in Facebook.
>
> These are simple enough that any Legacy user could make these bird houses.
>
>
>
> Just something to think about.
>
>
>
> C.A.G.
>
>
>
>
>
>
> https://www.facebook.com/groups/237412350498504/?multi_permalinks=1137337040506026&ref=share
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com?utm_medium=email&utm_source=footer>
> .
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000301d90f84%2417b46ba0%24471d42e0%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/000301d90f84%2417b46ba0%24471d42e0%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
> 

Re: Some Christmas ideas/gifts

[Jeff Richmond]

Nice explanation 👍Thanks for sharing.Jeff from Connecticut Sent from my iPhoneOn Dec 15, 2022, at 12:03 PM, Okla Mike (Liltwisted)  wrote:

  
  
What I do is stand them on the 90º side all next
to each other and glue the birdmouth side.  Lay them flat and
run a piece of duct tape under the edge and leave a tail on the
right side.  Do this for both ends.  Now they will just roll up
the left side and then the right and then push both side
together and flip the Duct tape around to hold things in place. 
Now I use stretch film to wrap 20 layers on both ends.  And then
about every foot or so in the length, I make three or four wraps
of stretch tape to act as a barrier to keep the glue off the
ratchet strap.  I then place a strap at each area of stretch
wrap with a twice around wrap.  Then make sure the ratchet is on
a flat and not a point and cinch them down.  Now I take a dead
blow hammer and beat the snot out of all the joints.  This will
settle any lifts and will true the column up nicely.  
  
I seen in one of the pictures there were block in
the inside.  Those were a resting place for the end caps and had
nothing to do with main assemble gluing.
Mike OK

On 12/15/2022 5:50 AM, Tim Ziegler
  wrote:


  
  They are both glued with a slightly
different process Bill so your input was great too. Mike used a
strapping clamp where
as the others were glued using the blocks and
  traditional clamps if I'm seeing it right?

  

  Kind Regards,


Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330


320-294-5798 shop
320-630-2243 cell
  

  
  

  
  
  
On Thu, Dec 15, 2022 at 2:21
  AM <bulke...@mmnet.com.au>
  wrote:


  

  
Very
nice looks like mike is the man to ask about them 
he
defiantly has more experience than me looking at
these pics
 
Bill
 

  
From: 'Curt George' via Legacy
Ornamental Mills <legacy-ornamental-mills@googlegroups.com>

Sent: Thursday, 15 December 2022 4:13 PM
To: legacy-ornamental-mills@googlegroups.com
        Subject: Re: Some Christmas ideas/gifts
  

 

  
Hello
Guys!  (Just got home form work.)
  
  
 
  
  
Here
are a few pix. that Mike sent me, a few year
back.  
  
  
Just
to show the scale he was making back then. 
These monsters were and are, Much larger then my
original intent For Christmas gift ideas.  But
like many of the posting on the group, Things
seem to run there OWN course, To where is ends,
No one ever knows. ;-) 
  
  
 
  
  
C.A.G.
  


  

  On
  Wednesday, December 14, 2022 at 11:15:57 PM
  EST, M.W.Foscue <mwfos...@earthlink.net>
  wrote: 


   


   


  

  
Bill,
Thanks
- the pic saved a thousand words.
It's
clear how he used the "glue blocks".
Cheers!
Mac




  
  
-

Re: Some Christmas ideas/gifts

[Tim Ziegler]

Thanks Bill more good stuff.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Wed, Dec 14, 2022 at 2:23 PM  wrote:

> Birdmouth joinery David Hibberd is the man look at his stuff
>
> https://www.youtube.com/@davidhenry32/videos
>
> I got all my ideas from his videos
>
>
>
> Bill
>
>
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Thursday, 15 December 2022 4:02 AM
> *To:* LOM Group 
> *Subject:* Re: Some Christmas ideas/gifts
>
>
>
> Thanks for digging that up Curt. Very useful information. I'll take a
> closer look at lunch. Just got done plowing snow
>
>
>
> Thanks Tim
>
>
>
>
>
> On Wed, Dec 14, 2022, 8:19 AM 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com> wrote:
>
> Here is the link to our Original group page.
> Both Mike and Art's posting on this topic are good to read.
>
> https://ornamentalmills.com/turningaround/BirdMouth.htm
>
>
>
> C.A.G.
>
>
>
> On Wednesday, December 14, 2022 at 09:01:01 AM EST, Owner <
> krat...@roadrunner.com> wrote:
>
>
>
>
>
> Unless  giving them as Christmas gifts or selling them for under $25
> you’ll be stuck with them, just did  a well established high end Holiday
> show in West Springfield,  MA that cost $8 just to get in and a $500 Vendor
> fee very little sold for anything over $25.
>
>
>
> Michael Kratky
>
> 119 Riverview Rd.,
>
> Northville, N.Y. 12134
>
>
>
> 518 863-2821
>
> text 518 207-7247
>
>
>
> Email;
>
> krat...@roadrunner.com
>
>
>
>
>
>
>
> On Dec 14, 2022, at 8:07 AM, Tim Ziegler  wrote:
>
>
>
> I'm betting so. You getting some time on your machine yet?
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Wed, Dec 14, 2022 at 6:56 AM Jeff Richmond 
> wrote:
>
> Oh yes, I have a couple of those. Just itching to use them.
>
>
>
> Magnate sells them too.
>
>
>
> Jeff from Connecticut
>
> Sent from my iPhone
>
>
>
> On Dec 14, 2022, at 6:38 AM, Tim Ziegler  wrote:
>
> 
>
> Good advice and thanks for pointing that out Bill.
>
> I will have to double check my arsenal of bits to see what I have to make
> that joint.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Wed, Dec 14, 2022 at 12:20 AM  wrote:
>
> Nice idea curt if anyone has a set of birdmouth router bits they are good
> for making hollow poles
>
> Like the old sailors did good for making bird houses you can also cut them
> on the table saw too
>
>
>
>
>
> 
>
>
>
>
>
> Bill
>
>
>
>
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Wednesday, 14 December 2022 4:06 PM
> *To:* Legacy ornamental mills 
> *Subject:* Some Christmas ideas/gifts
>
>
>
> These are "NOT" mine, but ones that I found in Facebook.
>
> These are simple enough that any Legacy user could make these bird houses.
>
>
>
> Just something to think about.
>
>
>
> C.A.G.
>
>
>
>
>
>
> https://www.facebook.com/groups/237412350498504/?multi_permalinks=1137337040506026&ref=share
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com?utm_medium=email&utm_source=footer>
> .
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> T

Re: Some Christmas ideas/gifts

[Tim Ziegler]

Hey I will do that Bill,
Wish I would have saw this email before I took the bucket off. I have a
LS150 New Holland Skid Loader w/a utility bucket.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Wed, Dec 14, 2022 at 2:13 PM  wrote:

> Ploughing snow I have never seen that can you take a pic of your rig you
> do that with Tim
>
>
>
> Bill
>
>
>
> *From:* legacy-ornamental-mills@googlegroups.com <
> legacy-ornamental-mills@googlegroups.com> *On Behalf Of *Tim Ziegler
> *Sent:* Thursday, 15 December 2022 4:02 AM
> *To:* LOM Group 
> *Subject:* Re: Some Christmas ideas/gifts
>
>
>
> Thanks for digging that up Curt. Very useful information. I'll take a
> closer look at lunch. Just got done plowing snow
>
>
>
> Thanks Tim
>
>
>
>
>
> On Wed, Dec 14, 2022, 8:19 AM 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com> wrote:
>
> Here is the link to our Original group page.
> Both Mike and Art's posting on this topic are good to read.
>
> https://ornamentalmills.com/turningaround/BirdMouth.htm
>
>
>
> C.A.G.
>
>
>
> On Wednesday, December 14, 2022 at 09:01:01 AM EST, Owner <
> krat...@roadrunner.com> wrote:
>
>
>
>
>
> Unless  giving them as Christmas gifts or selling them for under $25
> you’ll be stuck with them, just did  a well established high end Holiday
> show in West Springfield,  MA that cost $8 just to get in and a $500 Vendor
> fee very little sold for anything over $25.
>
>
>
> Michael Kratky
>
> 119 Riverview Rd.,
>
> Northville, N.Y. 12134
>
>
>
> 518 863-2821
>
> text 518 207-7247
>
>
>
> Email;
>
> krat...@roadrunner.com
>
>
>
>
>
>
>
> On Dec 14, 2022, at 8:07 AM, Tim Ziegler  wrote:
>
>
>
> I'm betting so. You getting some time on your machine yet?
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Wed, Dec 14, 2022 at 6:56 AM Jeff Richmond 
> wrote:
>
> Oh yes, I have a couple of those. Just itching to use them.
>
>
>
> Magnate sells them too.
>
>
>
> Jeff from Connecticut
>
> Sent from my iPhone
>
>
>
> On Dec 14, 2022, at 6:38 AM, Tim Ziegler  wrote:
>
> 
>
> Good advice and thanks for pointing that out Bill.
>
> I will have to double check my arsenal of bits to see what I have to make
> that joint.
>
>
> Kind Regards,
>
>
>
> Timothy J. Ziegler
>
> Ziegler WoodWork & Specialty
>
> 14171 160th Ave.
>
> Foreston MN 56330
>
>
>
> 320-294-5798 shop
>
> 320-630-2243 cell
>
>
>
>
>
> On Wed, Dec 14, 2022 at 12:20 AM  wrote:
>
> Nice idea curt if anyone has a set of birdmouth router bits they are good
> for making hollow poles
>
> Like the old sailors did good for making bird houses you can also cut them
> on the table saw too
>
>
>
>
>
> 
>
>
>
>
>
> Bill
>
>
>
>
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Wednesday, 14 December 2022 4:06 PM
> *To:* Legacy ornamental mills 
> *Subject:* Some Christmas ideas/gifts
>
>
>
> These are "NOT" mine, but ones that I found in Facebook.
>
> These are simple enough that any Legacy user could make these bird houses.
>
>
>
> Just something to think about.
>
>
>
> C.A.G.
>
>
>
>
>
>
> https://www.facebook.com/groups/237412350498504/?multi_permalinks=1137337040506026&ref=share
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com?utm_medium=email&utm_source=footer>
> .
>
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-o

Re: Some Christmas ideas/gifts

[Tim Ziegler]

Wow I'm hoping so to for sure. I have to get slowed down and have a little
LOM time my self.
It's been a few days lol. I have another Bone turning I am going to shape
on the LOM for sure.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Wed, Dec 14, 2022 at 7:36 AM Jeff Richmond  wrote:

> Almost, I am hoping for January
>
> Jeff from Connecticut
> Sent from my iPhone
>
> On Dec 14, 2022, at 8:07 AM, Tim Ziegler  wrote:
>
> 
> I'm betting so. You getting some time on your machine yet?
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Wed, Dec 14, 2022 at 6:56 AM Jeff Richmond 
> wrote:
>
>> Oh yes, I have a couple of those. Just itching to use them.
>>
>> Magnate sells them too.
>>
>> Jeff from Connecticut
>> Sent from my iPhone
>>
>> On Dec 14, 2022, at 6:38 AM, Tim Ziegler  wrote:
>>
>> 
>> Good advice and thanks for pointing that out Bill.
>> I will have to double check my arsenal of bits to see what I have to make
>> that joint.
>>
>> Kind Regards,
>>
>> Timothy J. Ziegler
>> Ziegler WoodWork & Specialty
>> 14171 160th Ave.
>> Foreston MN 56330
>>
>> 320-294-5798 shop
>> 320-630-2243 cell
>>
>>
>> On Wed, Dec 14, 2022 at 12:20 AM  wrote:
>>
>>> Nice idea curt if anyone has a set of birdmouth router bits they are
>>> good for making hollow poles
>>>
>>> Like the old sailors did good for making bird houses you can also cut
>>> them on the table saw too
>>>
>>>
>>>
>>> 
>>>
>>>
>>>
>>> Bill
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>> *From:* 'Curt George' via Legacy Ornamental Mills <
>>> legacy-ornamental-mills@googlegroups.com>
>>> *Sent:* Wednesday, 14 December 2022 4:06 PM
>>> *To:* Legacy ornamental mills 
>>> *Subject:* Some Christmas ideas/gifts
>>>
>>>
>>>
>>> These are "NOT" mine, but ones that I found in Facebook.
>>>
>>> These are simple enough that any Legacy user could make these bird
>>> houses.
>>>
>>>
>>>
>>> Just something to think about.
>>>
>>>
>>>
>>> C.A.G.
>>>
>>>
>>>
>>>
>>>
>>>
>>> https://www.facebook.com/groups/237412350498504/?multi_permalinks=1137337040506026&ref=share
>>>
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Legacy Ornamental Mills" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com
>>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com?utm_medium=email&utm_source=footer>
>>> .
>>>
>>> --
>>> You received this message because you are subscribed to the Google
>>> Groups "Legacy Ornamental Mills" group.
>>> To unsubscribe from this group and stop receiving emails from it, send
>>> an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>>> To view this discussion on the web visit
>>> https://groups.google.com/d/msgid/legacy-ornamental-mills/000301d90f84%2417b46ba0%24471d42e0%24%40mmnet.com.au
>>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/000301d90f84%2417b46ba0%24471d42e0%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
>>> .
>>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEOrTgM0-eVWgffnChOhtagoNFJQ_96LvcmnC_2H7QKcg%40mail.gmail.com
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEOrTgM0-eVWgffnChOhtagoNFJQ_96LvcmnC_2H7QKcg%40mai

RE: Some Christmas ideas/gifts

[bulkeley]

Birdmouth joinery David Hibberd is the man look at his stuff

https://www.youtube.com/@davidhenry32/videos

I got all my ideas from his videos

 

Bill

 

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Thursday, 15 December 2022 4:02 AM
To: LOM Group 
Subject: Re: Some Christmas ideas/gifts

 

Thanks for digging that up Curt. Very useful information. I'll take a closer 
look at lunch. Just got done plowing snow

 

Thanks Tim

 

 

On Wed, Dec 14, 2022, 8:19 AM 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > wrote:

Here is the link to our Original group page.  
Both Mike and Art's posting on this topic are good to read.

https://ornamentalmills.com/turningaround/BirdMouth.htm 

 

C.A.G.

 

On Wednesday, December 14, 2022 at 09:01:01 AM EST, Owner 
mailto:krat...@roadrunner.com> > wrote: 

 

 

Unless  giving them as Christmas gifts or selling them for under $25 you’ll be 
stuck with them, just did  a well established high end Holiday show in West 
Springfield,  MA that cost $8 just to get in and a $500 Vendor fee very little 
sold for anything over $25.

 

Michael Kratky

119 Riverview Rd., 

Northville, N.Y. 12134

 

518 863-2821

text 518 207-7247

 

Email;

krat...@roadrunner.com <mailto:krat...@roadrunner.com> 

 

 





On Dec 14, 2022, at 8:07 AM, Tim Ziegler mailto:timjzieg...@gmail.com> > wrote:

 

I'm betting so. You getting some time on your machine yet?



Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Wed, Dec 14, 2022 at 6:56 AM Jeff Richmond mailto:jtrichmo...@gmail.com> > wrote:

Oh yes, I have a couple of those. Just itching to use them.

 

Magnate sells them too.

 

Jeff from Connecticut 

Sent from my iPhone





On Dec 14, 2022, at 6:38 AM, Tim Ziegler mailto:timjzieg...@gmail.com> > wrote:



Good advice and thanks for pointing that out Bill. 

I will have to double check my arsenal of bits to see what I have to make that 
joint.




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Wed, Dec 14, 2022 at 12:20 AM mailto:bulke...@mmnet.com.au> > wrote:

Nice idea curt if anyone has a set of birdmouth router bits they are good for 
making hollow poles

Like the old sailors did good for making bird houses you can also cut them on 
the table saw too

 

 



 

 

Bill

 

 

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Wednesday, 14 December 2022 4:06 PM
To: Legacy ornamental mills 
Subject: Some Christmas ideas/gifts

 

These are "NOT" mine, but ones that I found in Facebook. 

These are simple enough that any Legacy user could make these bird houses.

 

Just something to think about.

 

C.A.G.

 

 

https://www.facebook.com/groups/237412350498504/?multi_permalinks=1137337040506026
 
<https://www.facebook.com/groups/237412350498504/?multi_permalinks=1137337040506026&ref=share>
 &ref=share 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com?utm_medium=email&utm_source=footer>
 .

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000301d90f84%2417b46ba0%24471d42e0%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/000301d90f84%2417b46ba0%24471d42e0%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEOrTgM0-

RE: Some Christmas ideas/gifts

[bulkeley]

Ploughing snow I have never seen that can you take a pic of your rig you do 
that with Tim

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Tim Ziegler
Sent: Thursday, 15 December 2022 4:02 AM
To: LOM Group 
Subject: Re: Some Christmas ideas/gifts

 

Thanks for digging that up Curt. Very useful information. I'll take a closer 
look at lunch. Just got done plowing snow

 

Thanks Tim

 

 

On Wed, Dec 14, 2022, 8:19 AM 'Curt George' via Legacy Ornamental Mills 
 wrote:

Here is the link to our Original group page.  
Both Mike and Art's posting on this topic are good to read.

https://ornamentalmills.com/turningaround/BirdMouth.htm 

 

C.A.G.

 

On Wednesday, December 14, 2022 at 09:01:01 AM EST, Owner 
mailto:krat...@roadrunner.com> > wrote: 

 

 

Unless  giving them as Christmas gifts or selling them for under $25 you’ll be 
stuck with them, just did  a well established high end Holiday show in West 
Springfield,  MA that cost $8 just to get in and a $500 Vendor fee very little 
sold for anything over $25.

 

Michael Kratky

119 Riverview Rd., 

Northville, N.Y. 12134

 

518 863-2821

text 518 207-7247

 

Email;

krat...@roadrunner.com <mailto:krat...@roadrunner.com> 

 

 





On Dec 14, 2022, at 8:07 AM, Tim Ziegler mailto:timjzieg...@gmail.com> > wrote:

 

I'm betting so. You getting some time on your machine yet?



Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Wed, Dec 14, 2022 at 6:56 AM Jeff Richmond mailto:jtrichmo...@gmail.com> > wrote:

Oh yes, I have a couple of those. Just itching to use them.

 

Magnate sells them too.

 

Jeff from Connecticut 

Sent from my iPhone





On Dec 14, 2022, at 6:38 AM, Tim Ziegler mailto:timjzieg...@gmail.com> > wrote:



Good advice and thanks for pointing that out Bill. 

I will have to double check my arsenal of bits to see what I have to make that 
joint.




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Wed, Dec 14, 2022 at 12:20 AM mailto:bulke...@mmnet.com.au> > wrote:

Nice idea curt if anyone has a set of birdmouth router bits they are good for 
making hollow poles

Like the old sailors did good for making bird houses you can also cut them on 
the table saw too

 

 



 

 

Bill

 

 

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Wednesday, 14 December 2022 4:06 PM
To: Legacy ornamental mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Some Christmas ideas/gifts

 

These are "NOT" mine, but ones that I found in Facebook. 

These are simple enough that any Legacy user could make these bird houses.

 

Just something to think about.

 

C.A.G.

 

 

https://www.facebook.com/groups/237412350498504/?multi_permalinks=1137337040506026
 
<https://www.facebook.com/groups/237412350498504/?multi_permalinks=1137337040506026&ref=share>
 &ref=share 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com?utm_medium=email&utm_source=footer>
 .

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000301d90f84%2417b46ba0%24471d42e0%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/000301d90f84%2417b46ba0%24471d42e0%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEOrTgM0-eVWgffnChOhtagoNFJQ_96LvcmnC_2H7QKcg%40mail.gmail.com
 
<

RE: Some Christmas ideas/gifts

[bulkeley]

I forgot about that one curt it even shows a spiral column which could easy be 
made short to be a spiral bird house 😊

 

Bill

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Thursday, 15 December 2022 1:19 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Some Christmas ideas/gifts

 

Here is the link to our Original group page.  
Both Mike and Art's posting on this topic are good to read.

https://ornamentalmills.com/turningaround/BirdMouth.htm 

 

C.A.G.

 

On Wednesday, December 14, 2022 at 09:01:01 AM EST, Owner 
mailto:krat...@roadrunner.com> > wrote: 

 

 

Unless  giving them as Christmas gifts or selling them for under $25 you’ll be 
stuck with them, just did  a well established high end Holiday show in West 
Springfield,  MA that cost $8 just to get in and a $500 Vendor fee very little 
sold for anything over $25.

 

Michael Kratky

119 Riverview Rd., 

Northville, N.Y. 12134

 

518 863-2821

text 518 207-7247

 

Email;

krat...@roadrunner.com <mailto:krat...@roadrunner.com> 

 

 





On Dec 14, 2022, at 8:07 AM, Tim Ziegler mailto:timjzieg...@gmail.com> > wrote:

 

I'm betting so. You getting some time on your machine yet?



Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Wed, Dec 14, 2022 at 6:56 AM Jeff Richmond mailto:jtrichmo...@gmail.com> > wrote:

Oh yes, I have a couple of those. Just itching to use them.

 

Magnate sells them too.

 

Jeff from Connecticut 

Sent from my iPhone





On Dec 14, 2022, at 6:38 AM, Tim Ziegler mailto:timjzieg...@gmail.com> > wrote:



Good advice and thanks for pointing that out Bill. 

I will have to double check my arsenal of bits to see what I have to make that 
joint.




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Wed, Dec 14, 2022 at 12:20 AM mailto:bulke...@mmnet.com.au> > wrote:

Nice idea curt if anyone has a set of birdmouth router bits they are good for 
making hollow poles

Like the old sailors did good for making bird houses you can also cut them on 
the table saw too

 

 



 

 

Bill

 

 

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Wednesday, 14 December 2022 4:06 PM
To: Legacy ornamental mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Some Christmas ideas/gifts

 

These are "NOT" mine, but ones that I found in Facebook. 

These are simple enough that any Legacy user could make these bird houses.

 

Just something to think about.

 

C.A.G.

 

 

https://www.facebook.com/groups/237412350498504/?multi_permalinks=1137337040506026
 
<https://www.facebook.com/groups/237412350498504/?multi_permalinks=1137337040506026&ref=share>
 &ref=share 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com?utm_medium=email&utm_source=footer>
 .

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000301d90f84%2417b46ba0%24471d42e0%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/000301d90f84%2417b46ba0%24471d42e0%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEOrTgM0-eVWgffnChOhtagoNFJQ_96LvcmnC_2H7QKcg%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEOrTgM0-eVWgffnChOhtagoNFJQ_96LvcmnC_2H7QKcg%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

 

-- 
You receiv

RE: Some Christmas ideas/gifts

[bulkeley]

I think that was curts idea something to make on the legacy as Christmas gifts

 

Bill

 

From: legacy-ornamental-mills@googlegroups.com 
 On Behalf Of Owner
Sent: Thursday, 15 December 2022 12:54 AM
To: legacy-ornamental-mills@googlegroups.com
Subject: Re: Some Christmas ideas/gifts

 

Unless  giving them as Christmas gifts or selling them for under $25 you’ll be 
stuck with them, just did  a well established high end Holiday show in West 
Springfield,  MA that cost $8 just to get in and a $500 Vendor fee very little 
sold for anything over $25.

 

Michael Kratky

119 Riverview Rd., 

Northville, N.Y. 12134

 

518 863-2821

text 518 207-7247

 

Email;

krat...@roadrunner.com <mailto:krat...@roadrunner.com> 

 

 





On Dec 14, 2022, at 8:07 AM, Tim Ziegler mailto:timjzieg...@gmail.com> > wrote:

 

I'm betting so. You getting some time on your machine yet?



Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Wed, Dec 14, 2022 at 6:56 AM Jeff Richmond mailto:jtrichmo...@gmail.com> > wrote:

Oh yes, I have a couple of those. Just itching to use them.

 

Magnate sells them too.

 

Jeff from Connecticut 

Sent from my iPhone





On Dec 14, 2022, at 6:38 AM, Tim Ziegler mailto:timjzieg...@gmail.com> > wrote:



Good advice and thanks for pointing that out Bill. 

I will have to double check my arsenal of bits to see what I have to make that 
joint.




Kind Regards,

 

Timothy J. Ziegler

Ziegler WoodWork & Specialty

14171 160th Ave.

Foreston MN 56330

 

320-294-5798 shop

320-630-2243 cell

 

 

On Wed, Dec 14, 2022 at 12:20 AM mailto:bulke...@mmnet.com.au> > wrote:

Nice idea curt if anyone has a set of birdmouth router bits they are good for 
making hollow poles

Like the old sailors did good for making bird houses you can also cut them on 
the table saw too

 

 



 

 

Bill

 

 

 

From: 'Curt George' via Legacy Ornamental Mills 
mailto:legacy-ornamental-mills@googlegroups.com> > 
Sent: Wednesday, 14 December 2022 4:06 PM
To: Legacy ornamental mills mailto:legacy-ornamental-mills@googlegroups.com> >
Subject: Some Christmas ideas/gifts

 

These are "NOT" mine, but ones that I found in Facebook. 

These are simple enough that any Legacy user could make these bird houses.

 

Just something to think about.

 

C.A.G.

 

 

https://www.facebook.com/groups/237412350498504/?multi_permalinks=1137337040506026
 
<https://www.facebook.com/groups/237412350498504/?multi_permalinks=1137337040506026&ref=share>
 &ref=share 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com?utm_medium=email&utm_source=footer>
 .

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000301d90f84%2417b46ba0%24471d42e0%24%40mmnet.com.au
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/000301d90f84%2417b46ba0%24471d42e0%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
 .

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEOrTgM0-eVWgffnChOhtagoNFJQ_96LvcmnC_2H7QKcg%40mail.gmail.com
 
<https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEOrTgM0-eVWgffnChOhtagoNFJQ_96LvcmnC_2H7QKcg%40mail.gmail.com?utm_medium=email&utm_source=footer>
 .

 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
<mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com> .
To view this discuss

Re: Some Christmas ideas/gifts

[Tim Ziegler]

Thanks for digging that up Curt. Very useful information. I'll take a
closer look at lunch. Just got done plowing snow

Thanks Tim


On Wed, Dec 14, 2022, 8:19 AM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> Here is the link to our Original group page.
> Both Mike and Art's posting on this topic are good to read.
> https://ornamentalmills.com/turningaround/BirdMouth.htm
>
> C.A.G.
>
> On Wednesday, December 14, 2022 at 09:01:01 AM EST, Owner <
> krat...@roadrunner.com> wrote:
>
>
> Unless  giving them as Christmas gifts or selling them for under $25
> you’ll be stuck with them, just did  a well established high end Holiday
> show in West Springfield,  MA that cost $8 just to get in and a $500 Vendor
> fee very little sold for anything over $25.
>
> Michael Kratky
> 119 Riverview Rd.,
> Northville, N.Y. 12134
>
> 518 863-2821
> text 518 207-7247
>
> Email;
> krat...@roadrunner.com
>
>
>
> On Dec 14, 2022, at 8:07 AM, Tim Ziegler  wrote:
>
> I'm betting so. You getting some time on your machine yet?
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Wed, Dec 14, 2022 at 6:56 AM Jeff Richmond 
> wrote:
>
> Oh yes, I have a couple of those. Just itching to use them.
>
> Magnate sells them too.
>
> Jeff from Connecticut
> Sent from my iPhone
>
> On Dec 14, 2022, at 6:38 AM, Tim Ziegler  wrote:
>
> 
> Good advice and thanks for pointing that out Bill.
> I will have to double check my arsenal of bits to see what I have to make
> that joint.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Wed, Dec 14, 2022 at 12:20 AM  wrote:
>
> Nice idea curt if anyone has a set of birdmouth router bits they are good
> for making hollow poles
>
> Like the old sailors did good for making bird houses you can also cut them
> on the table saw too
>
>
>
> 
>
>
>
> Bill
>
>
>
>
>
>
>
> *From:* 'Curt George' via Legacy Ornamental Mills <
> legacy-ornamental-mills@googlegroups.com>
> *Sent:* Wednesday, 14 December 2022 4:06 PM
> *To:* Legacy ornamental mills 
> *Subject:* Some Christmas ideas/gifts
>
>
>
> These are "NOT" mine, but ones that I found in Facebook.
>
> These are simple enough that any Legacy user could make these bird houses.
>
>
>
> Just something to think about.
>
>
>
> C.A.G.
>
>
>
>
>
>
> https://www.facebook.com/groups/237412350498504/?multi_permalinks=1137337040506026&ref=share
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/000301d90f84%2417b46ba0%24471d42e0%24%40mmnet.com.au
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/000301d90f84%2417b46ba0%24471d42e0%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
> .
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEOrTgM0-eVWgffnChOhtagoNFJQ_96LvcmnC_2H7QKcg%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEOrTgM0-eVWgffnChOhtagoNFJQ_96LvcmnC_2H7QKcg%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
>
> --
> You received this message because you are subscribed to the Google

Re: Some Christmas ideas/gifts

['Curt George' via Legacy Ornamental Mills]

 Here is the link to our Original group page.  
Both Mike and Art's posting on this topic are good to 
read.https://ornamentalmills.com/turningaround/BirdMouth.htm 

C.A.G.
On Wednesday, December 14, 2022 at 09:01:01 AM EST, Owner 
 wrote:  
 
 Unless  giving them as Christmas gifts or selling them for under $25 you’ll be 
stuck with them, just did  a well established high end Holiday show in West 
Springfield,  MA that cost $8 just to get in and a $500 Vendor fee very little 
sold for anything over $25.

Michael Kratky119 Riverview Rd., Northville, N.Y. 12134
518 863-2821text 518 207-7247
Email;krat...@roadrunner.com



On Dec 14, 2022, at 8:07 AM, Tim Ziegler  wrote:
I'm betting so. You getting some time on your machine yet?

Kind Regards,
Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell

On Wed, Dec 14, 2022 at 6:56 AM Jeff Richmond  wrote:

Oh yes, I have a couple of those. Just itching to use them.
Magnate sells them too.
Jeff from Connecticut 
Sent from my iPhone

On Dec 14, 2022, at 6:38 AM, Tim Ziegler  wrote:



Good advice and thanks for pointing that out Bill. I will have to double check 
my arsenal of bits to see what I have to make that joint.
Kind Regards,
Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330
320-294-5798 shop320-630-2243 cell

On Wed, Dec 14, 2022 at 12:20 AM  wrote:


Nice idea curt if anyone has a set of birdmouth router bits they are good for 
making hollow poles

Like the old sailors did good for making bird houses you can also cut them on 
the table saw too

 



 

Bill

 

 

 

From: 'Curt George' via Legacy Ornamental Mills 
 
Sent: Wednesday, 14 December 2022 4:06 PM
To: Legacy ornamental mills 
Subject: Some Christmas ideas/gifts

 

These are "NOT" mine, but ones that I found in Facebook. 

These are simple enough that any Legacy user could make these bird houses.

 

Just something to think about.

 

C.A.G.

 

 

https://www.facebook.com/groups/237412350498504/?multi_permalinks=1137337040506026&ref=share
 

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/000301d90f84%2417b46ba0%24471d42e0%24%40mmnet.com.au.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEOrTgM0-eVWgffnChOhtagoNFJQ_96LvcmnC_2H7QKcg%40mail.gmail.com.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/0F62061D-6D92-4F48-96A7-059111DC443D%40gmail.com.


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFd5ue7MiVfk3XmcDSv8%3DtqjFb3WKvRV_J9KDWAg_8oeA%40mail.gmail.com.




-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/76785F9D-276D-477C-976C-43539881A852%40roadrunner.com.
  

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1503663494.3048908.1671027544076%40mail.yahoo.com.

Re: Some Christmas ideas/gifts

[Owner]

Unless  giving them as Christmas gifts or selling them for under $25 you’ll be 
stuck with them, just did  a well established high end Holiday show in West 
Springfield,  MA that cost $8 just to get in and a $500 Vendor fee very little 
sold for anything over $25.

Michael Kratky
119 Riverview Rd., 
Northville, N.Y. 12134

518 863-2821
text 518 207-7247

Email;
krat...@roadrunner.com



> On Dec 14, 2022, at 8:07 AM, Tim Ziegler  wrote:
> 
> I'm betting so. You getting some time on your machine yet?
> 
> Kind Regards,
> 
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
> 
> 320-294-5798 shop
> 320-630-2243 cell
> 
> 
> On Wed, Dec 14, 2022 at 6:56 AM Jeff Richmond  <mailto:jtrichmo...@gmail.com>> wrote:
> Oh yes, I have a couple of those. Just itching to use them.
> 
> Magnate sells them too.
> 
> Jeff from Connecticut 
> Sent from my iPhone
> 
>> On Dec 14, 2022, at 6:38 AM, Tim Ziegler > <mailto:timjzieg...@gmail.com>> wrote:
>> 
>> 
>> Good advice and thanks for pointing that out Bill. 
>> I will have to double check my arsenal of bits to see what I have to make 
>> that joint.
>> 
>> Kind Regards,
>> 
>> Timothy J. Ziegler
>> Ziegler WoodWork & Specialty
>> 14171 160th Ave.
>> Foreston MN 56330
>> 
>> 320-294-5798 shop
>> 320-630-2243 cell
>> 
>> 
>> On Wed, Dec 14, 2022 at 12:20 AM > <mailto:bulke...@mmnet.com.au>> wrote:
>> Nice idea curt if anyone has a set of birdmouth router bits they are good 
>> for making hollow poles
>> 
>> Like the old sailors did good for making bird houses you can also cut them 
>> on the table saw too
>> 
>>  
>> 
>> 
>> 
>> 
>>  
>> 
>> Bill
>> 
>>  
>> 
>>  
>> 
>>  
>> 
>> From: 'Curt George' via Legacy Ornamental Mills 
>> > <mailto:legacy-ornamental-mills@googlegroups.com>> 
>> Sent: Wednesday, 14 December 2022 4:06 PM
>> To: Legacy ornamental mills > <mailto:legacy-ornamental-mills@googlegroups.com>>
>> Subject: Some Christmas ideas/gifts
>> 
>>  
>> 
>> These are "NOT" mine, but ones that I found in Facebook. 
>> 
>> These are simple enough that any Legacy user could make these bird houses.
>> 
>>  
>> 
>> Just something to think about.
>> 
>>  
>> 
>> C.A.G.
>> 
>>  
>> 
>>  
>> 
>> https://www.facebook.com/groups/237412350498504/?multi_permalinks=1137337040506026&ref=share
>>  
>> <https://www.facebook.com/groups/237412350498504/?multi_permalinks=1137337040506026&ref=share>
>>  
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
>> <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>.
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com
>>  
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com?utm_medium=email&utm_source=footer>.
>> 
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
>> <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>.
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/000301d90f84%2417b46ba0%24471d42e0%24%40mmnet.com.au
>>  
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/000301d90f84%2417b46ba0%24471d42e0%24%40mmnet.com.au?utm_medium=email&utm_source=footer>.
>> 
>> -- 
>> You received this message because you are subscribed to the Google Groups 
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an 
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com 
>> <mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com>.
>> To view this discussion on the web visit 
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEO

Re: Some Christmas ideas/gifts

[Jeff Richmond]

Almost, I am hoping for JanuaryJeff from Connecticut Sent from my iPhoneOn Dec 14, 2022, at 8:07 AM, Tim Ziegler  wrote:I'm betting so. You getting some time on your machine yet?Kind Regards,Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330320-294-5798 shop320-630-2243 cellOn Wed, Dec 14, 2022 at 6:56 AM Jeff Richmond <jtrichmo...@gmail.com> wrote:Oh yes, I have a couple of those. Just itching to use them.Magnate sells them too.Jeff from Connecticut Sent from my iPhoneOn Dec 14, 2022, at 6:38 AM, Tim Ziegler <timjzieg...@gmail.com> wrote:Good advice and thanks for pointing that out Bill. I will have to double check my arsenal of bits to see what I have to make that joint.Kind Regards,Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330320-294-5798 shop320-630-2243 cellOn Wed, Dec 14, 2022 at 12:20 AM <bulke...@mmnet.com.au> wrote:Nice idea curt if anyone has a set of birdmouth router bits they are good for making hollow polesLike the old sailors did good for making bird houses you can also cut them on the table saw too  Bill   From: 'Curt George' via Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> Sent: Wednesday, 14 December 2022 4:06 PMTo: Legacy ornamental mills <legacy-ornamental-mills@googlegroups.com>Subject: Some Christmas ideas/gifts These are "NOT" mine, but ones that I found in Facebook. These are simple enough that any Legacy user could make these bird houses. Just something to think about. C.A.G.  https://www.facebook.com/groups/237412350498504/?multi_permalinks=1137337040506026&ref=share -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com.



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000301d90f84%2417b46ba0%24471d42e0%24%40mmnet.com.au.




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEOrTgM0-eVWgffnChOhtagoNFJQ_96LvcmnC_2H7QKcg%40mail.gmail.com.




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/0F62061D-6D92-4F48-96A7-059111DC443D%40gmail.com.




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFd5ue7MiVfk3XmcDSv8%3DtqjFb3WKvRV_J9KDWAg_8oeA%40mail.gmail.com.




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/9090CA71-6955-4613-9B73-44D91D2714EE%40gmail.com.

Re: Some Christmas ideas/gifts

[Tim Ziegler]

I'm betting so. You getting some time on your machine yet?

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Wed, Dec 14, 2022 at 6:56 AM Jeff Richmond  wrote:

> Oh yes, I have a couple of those. Just itching to use them.
>
> Magnate sells them too.
>
> Jeff from Connecticut
> Sent from my iPhone
>
> On Dec 14, 2022, at 6:38 AM, Tim Ziegler  wrote:
>
> 
> Good advice and thanks for pointing that out Bill.
> I will have to double check my arsenal of bits to see what I have to make
> that joint.
>
> Kind Regards,
>
> Timothy J. Ziegler
> Ziegler WoodWork & Specialty
> 14171 160th Ave.
> Foreston MN 56330
>
> 320-294-5798 shop
> 320-630-2243 cell
>
>
> On Wed, Dec 14, 2022 at 12:20 AM  wrote:
>
>> Nice idea curt if anyone has a set of birdmouth router bits they are good
>> for making hollow poles
>>
>> Like the old sailors did good for making bird houses you can also cut
>> them on the table saw too
>>
>>
>>
>> 
>>
>>
>>
>> Bill
>>
>>
>>
>>
>>
>>
>>
>> *From:* 'Curt George' via Legacy Ornamental Mills <
>> legacy-ornamental-mills@googlegroups.com>
>> *Sent:* Wednesday, 14 December 2022 4:06 PM
>> *To:* Legacy ornamental mills 
>> *Subject:* Some Christmas ideas/gifts
>>
>>
>>
>> These are "NOT" mine, but ones that I found in Facebook.
>>
>> These are simple enough that any Legacy user could make these bird houses.
>>
>>
>>
>> Just something to think about.
>>
>>
>>
>> C.A.G.
>>
>>
>>
>>
>>
>>
>> https://www.facebook.com/groups/237412350498504/?multi_permalinks=1137337040506026&ref=share
>>
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com?utm_medium=email&utm_source=footer>
>> .
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "Legacy Ornamental Mills" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/legacy-ornamental-mills/000301d90f84%2417b46ba0%24471d42e0%24%40mmnet.com.au
>> <https://groups.google.com/d/msgid/legacy-ornamental-mills/000301d90f84%2417b46ba0%24471d42e0%24%40mmnet.com.au?utm_medium=email&utm_source=footer>
>> .
>>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEOrTgM0-eVWgffnChOhtagoNFJQ_96LvcmnC_2H7QKcg%40mail.gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEOrTgM0-eVWgffnChOhtagoNFJQ_96LvcmnC_2H7QKcg%40mail.gmail.com?utm_medium=email&utm_source=footer>
> .
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/0F62061D-6D92-4F48-96A7-059111DC443D%40gmail.com
> <https://groups.google.com/d/msgid/legacy-ornamental-mills/0F62061D-6D92-4F48-96A7-059111DC443D%40gmail.com?utm_medium=email&utm_source=footer>
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLFd5ue7MiVfk3XmcDSv8%3DtqjFb3WKvRV_J9KDWAg_8oeA%40mail.gmail.com.

Re: Some Christmas ideas/gifts

[Jeff Richmond]

Oh yes, I have a couple of those. Just itching to use them.Magnate sells them too.Jeff from Connecticut Sent from my iPhoneOn Dec 14, 2022, at 6:38 AM, Tim Ziegler  wrote:Good advice and thanks for pointing that out Bill. I will have to double check my arsenal of bits to see what I have to make that joint.Kind Regards,Timothy J. ZieglerZiegler WoodWork & Specialty14171 160th Ave.Foreston MN 56330320-294-5798 shop320-630-2243 cellOn Wed, Dec 14, 2022 at 12:20 AM <bulke...@mmnet.com.au> wrote:Nice idea curt if anyone has a set of birdmouth router bits they are good for making hollow polesLike the old sailors did good for making bird houses you can also cut them on the table saw too  Bill   From: 'Curt George' via Legacy Ornamental Mills <legacy-ornamental-mills@googlegroups.com> Sent: Wednesday, 14 December 2022 4:06 PMTo: Legacy ornamental mills <legacy-ornamental-mills@googlegroups.com>Subject: Some Christmas ideas/gifts These are "NOT" mine, but ones that I found in Facebook. These are simple enough that any Legacy user could make these bird houses. Just something to think about. C.A.G.  https://www.facebook.com/groups/237412350498504/?multi_permalinks=1137337040506026&ref=share -- You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com.



-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/000301d90f84%2417b46ba0%24471d42e0%24%40mmnet.com.au.




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLEOrTgM0-eVWgffnChOhtagoNFJQ_96LvcmnC_2H7QKcg%40mail.gmail.com.




-- 
You received this message because you are subscribed to the Google Groups "Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit https://groups.google.com/d/msgid/legacy-ornamental-mills/0F62061D-6D92-4F48-96A7-059111DC443D%40gmail.com.

Re: Some Christmas ideas/gifts

[Tim Ziegler]

Oh them are cool. Not sure I'd personally turn them on the LOM but, would
be fun to turn none the less.
Nice find Curt. Thanks for sharing.

Kind Regards,

Timothy J. Ziegler
Ziegler WoodWork & Specialty
14171 160th Ave.
Foreston MN 56330

320-294-5798 shop
320-630-2243 cell


On Tue, Dec 13, 2022 at 11:06 PM 'Curt George' via Legacy Ornamental Mills <
legacy-ornamental-mills@googlegroups.com> wrote:

> These are "NOT" mine, but ones that I found in Facebook.
> These are simple enough that any Legacy user could make these bird houses.
>
> Just something to think about.
>
> C.A.G.
>
>
>
> https://www.facebook.com/groups/237412350498504/?multi_permalinks=1137337040506026&ref=share
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "Legacy Ornamental Mills" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to legacy-ornamental-mills+unsubscr...@googlegroups.com.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com
> 
> .
>

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/CAMBiJLHUag0b%3DvVhpM8OQybhkjxbfXhfXVJ9gfpVOTV03zj6Bg%40mail.gmail.com.

Re: Some Christmas ideas/gifts

[M.W.Foscue]

Curtis,
Neat!!
Thanks for sharing.
Mac
-Original Message-
From: 
Sent: Dec 14, 2022 12:06 AM
To: Legacy ornamental mills 
Subject: Some Christmas ideas/gifts

These are "NOT" mine, but ones that I found in Facebook. 
These are simple enough that any Legacy user could make these bird houses.
 
Just something to think about.
 
C.A.G.
 
 
https://www.facebook.com/groups/237412350498504/?multi_permalinks=1137337040506026&ref=share
 


-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com 
(mailto:legacy-ornamental-mills+unsubscr...@googlegroups.com).
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/1824764268.2970557.1670994366194%40mail.yahoo.com.

-- 
You received this message because you are subscribed to the Google Groups 
"Legacy Ornamental Mills" group.
To unsubscribe from this group and stop receiving emails from it, send an email 
to legacy-ornamental-mills+unsubscr...@googlegroups.com.
To view this discussion on the web visit 
https://groups.google.com/d/msgid/legacy-ornamental-mills/9e87da70-40a4-83a0-f94b-8ee9bf408993%40earthlink.net.