RE: birdmouth joinery and adhesive
Nexabond 2500 Wood Adhesive another thing not available down here i see it's a instant adhesive anybody else used it as well tell me what its like Bill -Original Message- From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of Cole Andrews Sent: Tuesday, 10 March 2015 11:44 AM To: Legacy group Subject: Re: birdmouth joinery and adhesive After fighting with it all day I decided 12 sides would be a pain in the ass. 6 I can do , I don't have the 8 sided bit. My Circle looks good from the inside two many gaps on the outside. I am trying to attach a photo But it does not want to leave I photo to my documents . I found the nexa bond at Rockler I was not spelling it right . I am gonna send this picture directly from iPhoto to Curt maybe he can get it to the thread. On Mon, Mar 9, 2015 at 5:50 PM, CURTIS GEORGE curtgeo...@wowway.com wrote: Hello Bill and Cole. (and everyone else.) It is a nice day out, but now that the snow is melting My shop is flooded. ;-( Just cant win. (but its expected...) Any How the topic is Birds-mouth joinery. I like http://www.duckworksmagazine.com/10/howto/birdsmouth/index.htm this web page has helped me out a lot in the past, Cole post some pictures when you get time, I cant wait to see how your joinery works out. (even if its practice.) ;-) talk to you all latter. C.A.G. From: Bill Bulkeley bulke...@mmnet.com.au To: legacy-ornamental-mills@googlegroups.com Sent: Monday, March 9, 2015 5:26:05 PM Subject: RE: birdmouth joinery and adhesive Are you sure its nexbond I know maxbond if you have some post a picture Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of cole Sent: Tuesday, 10 March 2015 7:06 AM To: legacy-ornamental-mills@googlegroups.com Subject: birdmouth joinery and adhesive Beautiful day and I thought I would practice my bird mouth joinery .The directions for 12 sides say set the bit height at 11/16 for 3/4 in stock . Can this be right, that leaves just knife edge on the stock. I went ahead and ran some scrap to practice setup and glueup . Also has anyone nexbond adhesive , hope I am spelling that right I type it on google and nothing. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. - No virus found in this message. Checked by AVG - www.avg.com Version: 2015.0.5751 / Virus Database: 4299/9266 - Release Date: 03/10/15 -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: birdmouth joinery and adhesive
Hello Bill and Cole. (and everyone else.) It is a nice day out, but now that the snow is melting My shop is flooded. ;-( Just cant win. (but its expected...) Any How the topic is Birds-mouth joinery. I like http://www.duckworksmagazine.com/10/howto/birdsmouth/index.htm this web page has helped me out a lot in the past, Cole post some pictures when you get time, I cant wait to see how your joinery works out. (even if its practice.) ;-) talk to you all latter. C.A.G. - Original Message - From: Bill Bulkeley bulke...@mmnet.com.au To: legacy-ornamental-mills@googlegroups.com Sent: Monday, March 9, 2015 5:26:05 PM Subject: RE: birdmouth joinery and adhesive Are you sure its nexbond I know maxbond if you have some post a picture Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of cole Sent: Tuesday, 10 March 2015 7:06 AM To: legacy-ornamental-mills@googlegroups.com Subject: birdmouth joinery and adhesive Beautiful day and I thought I would practice my bird mouth joinery .The directions for 12 sides say set the bit height at 11/16 for 3/4 in stock . Can this be right, that leaves just knife edge on the stock. I went ahead and ran some scrap to practice setup and glueup . Also has anyone nexbond adhesive , hope I am spelling that right I type it on google and nothing. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com . To post to this group, send email to legacy-ornamental-mills@googlegroups.com . Visit this group at http://groups.google.com/group/legacy-ornamental-mills . For more options, visit https://groups.google.com/d/optout . -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
RE: birdmouth joinery and adhesive
Are you sure its nexbond I know maxbond if you have some post a picture Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of cole Sent: Tuesday, 10 March 2015 7:06 AM To: legacy-ornamental-mills@googlegroups.com Subject: birdmouth joinery and adhesive Beautiful day and I thought I would practice my bird mouth joinery .The directions for 12 sides say set the bit height at 11/16 for 3/4 in stock . Can this be right, that leaves just knife edge on the stock. I went ahead and ran some scrap to practice setup and glueup . Also has anyone nexbond adhesive , hope I am spelling that right I type it on google and nothing. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
birdmouth joinery and adhesive
Beautiful day and I thought I would practice my bird mouth joinery .The directions for 12 sides say set the bit height at 11/16 for 3/4 in stock . Can this be right, that leaves just knife edge on the stock. I went ahead and ran some scrap to practice setup and glueup . Also has anyone nexbond adhesive , hope I am spelling that right I type it on google and nothing. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: birdmouth joinery and adhesive
After fighting with it all day I decided 12 sides would be a pain in the ass. 6 I can do , I don't have the 8 sided bit. My Circle looks good from the inside two many gaps on the outside. I am trying to attach a photo But it does not want to leave I photo to my documents . I found the nexa bond at Rockler I was not spelling it right . I am gonna send this picture directly from iPhoto to Curt maybe he can get it to the thread. On Mon, Mar 9, 2015 at 5:50 PM, CURTIS GEORGE curtgeo...@wowway.com wrote: Hello Bill and Cole. (and everyone else.) It is a nice day out, but now that the snow is melting My shop is flooded. ;-( Just cant win. (but its expected...) Any How the topic is Birds-mouth joinery. I like http://www.duckworksmagazine.com/10/howto/birdsmouth/index.htm this web page has helped me out a lot in the past, Cole post some pictures when you get time, I cant wait to see how your joinery works out. (even if its practice.) ;-) talk to you all latter. C.A.G. From: Bill Bulkeley bulke...@mmnet.com.au To: legacy-ornamental-mills@googlegroups.com Sent: Monday, March 9, 2015 5:26:05 PM Subject: RE: birdmouth joinery and adhesive Are you sure its nexbond I know maxbond if you have some post a picture Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of cole Sent: Tuesday, 10 March 2015 7:06 AM To: legacy-ornamental-mills@googlegroups.com Subject: birdmouth joinery and adhesive Beautiful day and I thought I would practice my bird mouth joinery .The directions for 12 sides say set the bit height at 11/16 for 3/4 in stock . Can this be right, that leaves just knife edge on the stock. I went ahead and ran some scrap to practice setup and glueup . Also has anyone nexbond adhesive , hope I am spelling that right I type it on google and nothing. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout.
Re: birdmouth joinery and adhesive
joints are important, since the parts won't swell as they do with waterbased glues. Accepts most stains and finishes. RELATED ARTICLES How to Apply Plywood Veneer Edge Banding to Solid Wood with Masking Tape Hold-Downs How to Apply Hot Melt Veneer Shelving Tape with a Hot Iron and J-Roller How to Renovate a Wall Cabinet with Maple Veneers and Paneling How to Stain Veneers to Match Hardwood Plywood Lumber Applying Unbacked and Sliced Veneer Sheets with Yellow Wood Glue Specialized Router Bits: Edge-banding Bits Cut Plywood Veneers with V-Groove Joinery Tips for Using a Clothes Iron to Apply Veneer to Plywood Shelving Top Routing Techniques: Cleaning Up Veneer Hand Saw Series - Veneer Saws Is Veneering Just for Experts? Veneers: Quarter or Plain Sliced? How to Make Wood Veneer Sheets With the Caul Veneering Technique How to Make a Shop-Made Veneer Press Bookmatch Larger Veneer Wood Sheets by Splicing and Joining Using Exotic Wood Veneer Sheets to Make Decorative Cabinet Drawer Fronts Apply Veneer with Contact Cement Thin Air Vacuum Veneer Press Tips Refacing Your Cabinets with Veneer Introduction to Veneering How to Tell the Difference Between Baltic and Veneer Birch Plywood CA Residents: Prop. 65 info YOU MAY ALSO LIKE 2 oz. Quick-Set Glue Activator No Reviews $4.99 Add to Cart 7 oz. Quick-Set Glue Aerosol Activator $12.99 Add to Cart 2 oz. Quick-Set Glue Debonder No Reviews $7.39 Add to Cart Stick Fast CA Glue Dry Box Kit $39.99 Add to Cart Loctite® Spray Adhesive No Reviews $13.99 Add to Cart Stick Fast CA Wood Finish Starter Kit No Reviews $29.99 Add to Cart WonderLok 'Em Loose Joint Repair $6.29 Add to Cart Have a good night all. C.A.G. From: Cole Andrews coleandrew...@gmail.com To: Legacy group legacy-ornamental-mills@googlegroups.com Sent: Monday, March 9, 2015 8:43:36 PM Subject: Re: birdmouth joinery and adhesive After fighting with it all day I decided 12 sides would be a pain in the ass. 6 I can do , I don't have the 8 sided bit. My Circle looks good from the inside two many gaps on the outside. I am trying to attach a photo But it does not want to leave I photo to my documents . I found the nexa bond at Rockler I was not spelling it right . I am gonna send this picture directly from iPhoto to Curt maybe he can get it to the thread. On Mon, Mar 9, 2015 at 5:50 PM, CURTIS GEORGE curtgeo...@wowway.com wrote: Hello Bill and Cole. (and everyone else.) It is a nice day out, but now that the snow is melting My shop is flooded. ;-( Just cant win. (but its expected...) Any How the topic is Birds-mouth joinery. I like http://www.duckworksmagazine.com/10/howto/birdsmouth/index.htm this web page has helped me out a lot in the past, Cole post some pictures when you get time, I cant wait to see how your joinery works out. (even if its practice.) ;-) talk to you all latter. C.A.G. From: Bill Bulkeley bulke...@mmnet.com.au To: legacy-ornamental-mills@googlegroups.com Sent: Monday, March 9, 2015 5:26:05 PM Subject: RE: birdmouth joinery and adhesive Are you sure its nexbond I know maxbond if you have some post a picture Bill From: legacy-ornamental-mills@googlegroups.com [mailto:legacy-ornamental-mills@googlegroups.com] On Behalf Of cole Sent: Tuesday, 10 March 2015 7:06 AM To: legacy-ornamental-mills@googlegroups.com Subject: birdmouth joinery and adhesive Beautiful day and I thought I would practice my bird mouth joinery .The directions for 12 sides say set the bit height at 11/16 for 3/4 in stock . Can this be right, that leaves just knife edge on the stock. I went ahead and ran some scrap to practice setup and glueup . Also has anyone nexbond adhesive , hope I am spelling that right I type it on google and nothing. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails from it, send an email to legacy-ornamental-mills+unsubscr...@googlegroups.com. To post to this group, send email to legacy-ornamental-mills@googlegroups.com. Visit this group at http://groups.google.com/group/legacy-ornamental-mills. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups Legacy Ornamental Mills group. To unsubscribe from this group and stop receiving emails