Re: [LegacyUG] Issue with Bibliography - V7
It fixed mine too. Along with the source picture problem that was diving me nuts. G.C. On Tue, Jul 15, 2008 at 8:20 AM, Cary <[EMAIL PROTECTED]> wrote: > The latest update seems to have corrected both these issues. Thank you > Legacy! > > > > > > Cary > > [EMAIL PROTECTED] > > > > *From:* [EMAIL PROTECTED] [mailto: > [EMAIL PROTECTED] *On Behalf Of *G Oliver > *Sent:* Monday, July 14, 2008 9:49 AM > *To:* LegacyUserGroup@legacyfamilytree.com > *Subject:* Re: [LegacyUG] Issue with Bibliography - V7 > > > > I also continue to have the same problem. In addition to the one line pages > I have print running into the margin at the bottom of the page. It prints on > top of the page number etc. > > GCO > > On Sun, Jul 13, 2008 at 4:43 PM, Cary <[EMAIL PROTECTED]> wrote: > > Good ideas, tried both. Deleted one empty source. No joy, same problem. > Hopefully in the work week the Legacy folks will have an idea or confirm a > > bug. > > > Cary > [EMAIL PROTECTED] > > -Original Message- > From: [EMAIL PROTECTED] > > [mailto:[EMAIL PROTECTED] On Behalf Of Jay S. > Van > Zeeland > Sent: Sunday, July 13, 2008 1:10 PM > To: LegacyUserGroup@legacyfamilytree.com > Subject: RE: [LegacyUG] Issue with Bibliography - V7 > > Cary, > > I know that this isn't much help, but I've run an ancestry report with all > generations (11,000 people) and had no problem. I, too, have a number of > sources with the detail text of the document from v.6, but had no problems. > > Could you try to do File Maintenance|Check and repair, perhaps also do a > Master List clean-up. Perhaps this may help. > > > > Cary Said: > The issue seems to be all sources with long quotes from the text. They > were > created in Version 6, before sourcewriter, and before the ability to have a > Bibliography. As the entire text prints properly in the Source Citation > section, I don't think it's the Source that's the problem. It's something > about the way the Bibliography is created. > > > Cary > [EMAIL PROTECTED] > > > > Kirsten Said: > > Cary: > > I previewed an Ancestor Book Report from my file (limited to only 3 > generations) and found no problem with the bibliography. I wonder if it's > possible that your trouble could be connected to just the one particular > source template--and then would carry forward from that point on. I know > there's a different sort of a problem specific to just the 1910 US census > SourceWriter template and wonder if you could be seeing something similar. > Did you use SourceWriter to create the problem source citation and, if so, > which template did you use? > > Kirsten > > _ > > Cary Said: > > > I'm desperate, so I tried to do this, BUT - None of the funky one line > pages > are in the reports or the Source Citations where I could change something. > ALL of them are in the Bibliography. That's created by Legacy and there is > no place for me to delete spaces etc. > > The first instance is in the listing for a web site where the source text > includes the entire text of several gravestone epitaphs. Once that hit the > bottom of a page, each line after that is on a separate page. Why would a > bibliography include source text or comments anyway? The point of a > bibliography is to be a LIST only. The paging problem did NOT occur on the > same source in Source Citations. > > I also noted that the Bibliography continued below the page number and into > the margin on another page rather than have a page break in that source. > So > the pagination is off both in NOT making a break in mid notes in one case > and in breaking after every line in another. I suspect the base problem is > including Source text (which is long in some cases) in the Bibliography at > all. > > I think this is a bug. > > Cary > [EMAIL PROTECTED] > > > > > > > Legacy User Group guidelines: > > http://www.LegacyFamilyTree.com/Etiquette.asp<http://www.legacyfamilytree.com/Etiquette.asp> > Archived messages: > http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ > Online technical support: > http://www.LegacyFamilyTree.com/Help.asp<http://www.legacyfamilytree.com/Help.asp> > To unsubscribe: > http://www.LegacyFamilyTree.com/LegacyLists.asp<http://www.legacyfamilytree.com/LegacyLists.asp> > > > > > > > > Legacy User Group guidelines: > > http://www.LegacyFamilyTree.com/Etiquette.asp<http://www.legacyfamilytree.com/Etiquette.asp> > Archived messages: > http://w
RE: [LegacyUG] Issue with Bibliography - V7
The latest update seems to have corrected both these issues. Thank you Legacy! Cary [EMAIL PROTECTED] From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of G Oliver Sent: Monday, July 14, 2008 9:49 AM To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] Issue with Bibliography - V7 I also continue to have the same problem. In addition to the one line pages I have print running into the margin at the bottom of the page. It prints on top of the page number etc. GCO On Sun, Jul 13, 2008 at 4:43 PM, Cary <[EMAIL PROTECTED]> wrote: Good ideas, tried both. Deleted one empty source. No joy, same problem. Hopefully in the work week the Legacy folks will have an idea or confirm a bug. Cary [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jay S. Van Zeeland Sent: Sunday, July 13, 2008 1:10 PM To: LegacyUserGroup@legacyfamilytree.com Subject: RE: [LegacyUG] Issue with Bibliography - V7 Cary, I know that this isn't much help, but I've run an ancestry report with all generations (11,000 people) and had no problem. I, too, have a number of sources with the detail text of the document from v.6, but had no problems. Could you try to do File Maintenance|Check and repair, perhaps also do a Master List clean-up. Perhaps this may help. Cary Said: The issue seems to be all sources with long quotes from the text. They were created in Version 6, before sourcewriter, and before the ability to have a Bibliography. As the entire text prints properly in the Source Citation section, I don't think it's the Source that's the problem. It's something about the way the Bibliography is created. Cary [EMAIL PROTECTED] Kirsten Said: Cary: I previewed an Ancestor Book Report from my file (limited to only 3 generations) and found no problem with the bibliography. I wonder if it's possible that your trouble could be connected to just the one particular source template--and then would carry forward from that point on. I know there's a different sort of a problem specific to just the 1910 US census SourceWriter template and wonder if you could be seeing something similar. Did you use SourceWriter to create the problem source citation and, if so, which template did you use? Kirsten _ Cary Said: I'm desperate, so I tried to do this, BUT - None of the funky one line pages are in the reports or the Source Citations where I could change something. ALL of them are in the Bibliography. That's created by Legacy and there is no place for me to delete spaces etc. The first instance is in the listing for a web site where the source text includes the entire text of several gravestone epitaphs. Once that hit the bottom of a page, each line after that is on a separate page. Why would a bibliography include source text or comments anyway? The point of a bibliography is to be a LIST only. The paging problem did NOT occur on the same source in Source Citations. I also noted that the Bibliography continued below the page number and into the margin on another page rather than have a page break in that source. So the pagination is off both in NOT making a break in mid notes in one case and in breaking after every line in another. I suspect the base problem is including Source text (which is long in some cases) in the Bibliography at all. I think this is a bug. Cary [EMAIL PROTECTED] Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Issue with Bibliography - V7
I also continue to have the same problem. In addition to the one line pages I have print running into the margin at the bottom of the page. It prints on top of the page number etc. GCO On Sun, Jul 13, 2008 at 4:43 PM, Cary <[EMAIL PROTECTED]> wrote: > Good ideas, tried both. Deleted one empty source. No joy, same problem. > Hopefully in the work week the Legacy folks will have an idea or confirm a > bug. > > > Cary > [EMAIL PROTECTED] > > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On Behalf Of Jay S. > Van > Zeeland > Sent: Sunday, July 13, 2008 1:10 PM > To: LegacyUserGroup@legacyfamilytree.com > Subject: RE: [LegacyUG] Issue with Bibliography - V7 > > Cary, > > I know that this isn't much help, but I've run an ancestry report with all > generations (11,000 people) and had no problem. I, too, have a number of > sources with the detail text of the document from v.6, but had no problems. > > Could you try to do File Maintenance|Check and repair, perhaps also do a > Master List clean-up. Perhaps this may help. > > > > Cary Said: > The issue seems to be all sources with long quotes from the text. They > were > created in Version 6, before sourcewriter, and before the ability to have a > Bibliography. As the entire text prints properly in the Source Citation > section, I don't think it's the Source that's the problem. It's something > about the way the Bibliography is created. > > > Cary > [EMAIL PROTECTED] > > > > Kirsten Said: > > Cary: > > I previewed an Ancestor Book Report from my file (limited to only 3 > generations) and found no problem with the bibliography. I wonder if it's > possible that your trouble could be connected to just the one particular > source template--and then would carry forward from that point on. I know > there's a different sort of a problem specific to just the 1910 US census > SourceWriter template and wonder if you could be seeing something similar. > Did you use SourceWriter to create the problem source citation and, if so, > which template did you use? > > Kirsten > > _ > > Cary Said: > > > I'm desperate, so I tried to do this, BUT - None of the funky one line > pages > are in the reports or the Source Citations where I could change something. > ALL of them are in the Bibliography. That's created by Legacy and there is > no place for me to delete spaces etc. > > The first instance is in the listing for a web site where the source text > includes the entire text of several gravestone epitaphs. Once that hit the > bottom of a page, each line after that is on a separate page. Why would a > bibliography include source text or comments anyway? The point of a > bibliography is to be a LIST only. The paging problem did NOT occur on the > same source in Source Citations. > > I also noted that the Bibliography continued below the page number and into > the margin on another page rather than have a page break in that source. > So > the pagination is off both in NOT making a break in mid notes in one case > and in breaking after every line in another. I suspect the base problem is > including Source text (which is long in some cases) in the Bibliography at > all. > > I think this is a bug. > > Cary > [EMAIL PROTECTED] > > > > > > > Legacy User Group guidelines: > > http://www.LegacyFamilyTree.com/Etiquette.asp<http://www.legacyfamilytree.com/Etiquette.asp> > Archived messages: > http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ > Online technical support: > http://www.LegacyFamilyTree.com/Help.asp<http://www.legacyfamilytree.com/Help.asp> > To unsubscribe: > http://www.LegacyFamilyTree.com/LegacyLists.asp<http://www.legacyfamilytree.com/LegacyLists.asp> > > > > > > > > Legacy User Group guidelines: > > http://www.LegacyFamilyTree.com/Etiquette.asp<http://www.legacyfamilytree.com/Etiquette.asp> > Archived messages: > http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ > Online technical support: > http://www.LegacyFamilyTree.com/Help.asp<http://www.legacyfamilytree.com/Help.asp> > To unsubscribe: > http://www.LegacyFamilyTree.com/LegacyLists.asp<http://www.legacyfamilytree.com/LegacyLists.asp> > > > > Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Issue with Bibliography - V7
Good ideas, tried both. Deleted one empty source. No joy, same problem. Hopefully in the work week the Legacy folks will have an idea or confirm a bug. Cary [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jay S. Van Zeeland Sent: Sunday, July 13, 2008 1:10 PM To: LegacyUserGroup@legacyfamilytree.com Subject: RE: [LegacyUG] Issue with Bibliography - V7 Cary, I know that this isn't much help, but I've run an ancestry report with all generations (11,000 people) and had no problem. I, too, have a number of sources with the detail text of the document from v.6, but had no problems. Could you try to do File Maintenance|Check and repair, perhaps also do a Master List clean-up. Perhaps this may help. Cary Said: The issue seems to be all sources with long quotes from the text. They were created in Version 6, before sourcewriter, and before the ability to have a Bibliography. As the entire text prints properly in the Source Citation section, I don't think it's the Source that's the problem. It's something about the way the Bibliography is created. Cary [EMAIL PROTECTED] Kirsten Said: Cary: I previewed an Ancestor Book Report from my file (limited to only 3 generations) and found no problem with the bibliography. I wonder if it's possible that your trouble could be connected to just the one particular source template--and then would carry forward from that point on. I know there's a different sort of a problem specific to just the 1910 US census SourceWriter template and wonder if you could be seeing something similar. Did you use SourceWriter to create the problem source citation and, if so, which template did you use? Kirsten _ Cary Said: I'm desperate, so I tried to do this, BUT - None of the funky one line pages are in the reports or the Source Citations where I could change something. ALL of them are in the Bibliography. That's created by Legacy and there is no place for me to delete spaces etc. The first instance is in the listing for a web site where the source text includes the entire text of several gravestone epitaphs. Once that hit the bottom of a page, each line after that is on a separate page. Why would a bibliography include source text or comments anyway? The point of a bibliography is to be a LIST only. The paging problem did NOT occur on the same source in Source Citations. I also noted that the Bibliography continued below the page number and into the margin on another page rather than have a page break in that source. So the pagination is off both in NOT making a break in mid notes in one case and in breaking after every line in another. I suspect the base problem is including Source text (which is long in some cases) in the Bibliography at all. I think this is a bug. Cary [EMAIL PROTECTED] Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Issue with Bibliography - V7
Cary, I do know the kind of problem you're talking about. I had this same issue. Doing the File Maintenance/Check and repair seems to have cleared it up for me. I'd be interested to know if it works for you. My report was hundreds of pages because of the problem with the Bibliography. Now I can print a Descendant Narrative report for the same ancestor, including the Bibliography that is only 57 pages long. Dede Holden On Sun, Jul 13, 2008 at 1:09 PM, Jay S. Van Zeeland <[EMAIL PROTECTED]> wrote: Jay said: > > I know that this isn't much help, but I've run an ancestry report with all > generations (11,000 people) and had no problem. I, too, have a number of > sources with the detail text of the document from v.6, but had no problems. > > Could you try to do File Maintenance|Check and repair, perhaps also do a > Master List clean-up. Perhaps this may help. > Cary said: > I'm desperate, so I tried to do this, BUT - None of the funky one line pages > are in the reports or the Source Citations where I could change something. > ALL of them are in the Bibliography. That's created by Legacy and there is > no place for me to delete spaces etc. > > The first instance is in the listing for a web site where the source text > includes the entire text of several gravestone epitaphs. Once that hit the > bottom of a page, each line after that is on a separate page. Why would a > bibliography include source text or comments anyway? The point of a > bibliography is to be a LIST only. The paging problem did NOT occur on the > same source in Source Citations. > > I also noted that the Bibliography continued below the page number and into > the margin on another page rather than have a page break in that source. So > the pagination is off both in NOT making a break in mid notes in one case > and in breaking after every line in another. I suspect the base problem is > including Source text (which is long in some cases) in the Bibliography at > all. Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Issue with Bibliography - V7
Cary: If the bug is connected to generation of the bibliography, then wouldn't it show up in conjunction with *all* bibliographic entries? This is grasping at straws, but have you tried a *Descendant* Book Report to see if you get the same result and/or producing an Ancestor Book Report with fewer generations that don't include the troublesome source citation? I have a source citation created in v.6 that contains 30 lines of detail text but I don't see it causing any problems in the bibliography. (Not casting any doubts on your results here, just trying to narrow down the problem and/or find a workaround.) Kirsten -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Cary Sent: Sunday, July 13, 2008 10:53 AM To: LegacyUserGroup@legacyfamilytree.com Subject: RE: [LegacyUG] Issue with Bibliography - V7 The issue seems to be all sources with long quotes from the text. They were created in Version 6, before sourcewriter, and before the ability to have a Bibliography. As the entire text prints properly in the Source Citation section, I don't think it's the Source that's the problem. It's something about the way the Bibliography is created. Cary [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kirsten Bowman Sent: Sunday, July 13, 2008 12:29 PM To: LegacyUserGroup@legacyfamilytree.com Subject: RE: [LegacyUG] Issue with Bibliography - V7 Cary: I previewed an Ancestor Book Report from my file (limited to only 3 generations) and found no problem with the bibliography. I wonder if it's possible that your trouble could be connected to just the one particular source template--and then would carry forward from that point on. I know there's a different sort of a problem specific to just the 1910 US census SourceWriter template and wonder if you could be seeing something similar. Did you use SourceWriter to create the problem source citation and, if so, which template did you use? Kirsten Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Issue with Bibliography - V7
Cary, I know that this isn't much help, but I've run an ancestry report with all generations (11,000 people) and had no problem. I, too, have a number of sources with the detail text of the document from v.6, but had no problems. Could you try to do File Maintenance|Check and repair, perhaps also do a Master List clean-up. Perhaps this may help. Cary Said: The issue seems to be all sources with long quotes from the text. They were created in Version 6, before sourcewriter, and before the ability to have a Bibliography. As the entire text prints properly in the Source Citation section, I don't think it's the Source that's the problem. It's something about the way the Bibliography is created. Cary [EMAIL PROTECTED] Kirsten Said: Cary: I previewed an Ancestor Book Report from my file (limited to only 3 generations) and found no problem with the bibliography. I wonder if it's possible that your trouble could be connected to just the one particular source template--and then would carry forward from that point on. I know there's a different sort of a problem specific to just the 1910 US census SourceWriter template and wonder if you could be seeing something similar. Did you use SourceWriter to create the problem source citation and, if so, which template did you use? Kirsten _ Cary Said: I'm desperate, so I tried to do this, BUT - None of the funky one line pages are in the reports or the Source Citations where I could change something. ALL of them are in the Bibliography. That's created by Legacy and there is no place for me to delete spaces etc. The first instance is in the listing for a web site where the source text includes the entire text of several gravestone epitaphs. Once that hit the bottom of a page, each line after that is on a separate page. Why would a bibliography include source text or comments anyway? The point of a bibliography is to be a LIST only. The paging problem did NOT occur on the same source in Source Citations. I also noted that the Bibliography continued below the page number and into the margin on another page rather than have a page break in that source. So the pagination is off both in NOT making a break in mid notes in one case and in breaking after every line in another. I suspect the base problem is including Source text (which is long in some cases) in the Bibliography at all. I think this is a bug. Cary [EMAIL PROTECTED] Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Issue with Bibliography - V7
The issue seems to be all sources with long quotes from the text. They were created in Version 6, before sourcewriter, and before the ability to have a Bibliography. As the entire text prints properly in the Source Citation section, I don't think it's the Source that's the problem. It's something about the way the Bibliography is created. Cary [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Kirsten Bowman Sent: Sunday, July 13, 2008 12:29 PM To: LegacyUserGroup@legacyfamilytree.com Subject: RE: [LegacyUG] Issue with Bibliography - V7 Cary: I previewed an Ancestor Book Report from my file (limited to only 3 generations) and found no problem with the bibliography. I wonder if it's possible that your trouble could be connected to just the one particular source template--and then would carry forward from that point on. I know there's a different sort of a problem specific to just the 1910 US census SourceWriter template and wonder if you could be seeing something similar. Did you use SourceWriter to create the problem source citation and, if so, which template did you use? Kirsten -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Cary Sent: Sunday, July 13, 2008 8:10 AM To: LegacyUserGroup@legacyfamilytree.com Subject: RE: [LegacyUG] Issue with Bibliography - V7 I'm desperate, so I tried to do this, BUT - None of the funky one line pages are in the reports or the Source Citations where I could change something. ALL of them are in the Bibliography. That's created by Legacy and there is no place for me to delete spaces etc. The first instance is in the listing for a web site where the source text includes the entire text of several gravestone epitaphs. Once that hit the bottom of a page, each line after that is on a separate page. Why would a bibliography include source text or comments anyway? The point of a bibliography is to be a LIST only. The paging problem did NOT occur on the same source in Source Citations. I also noted that the Bibliography continued below the page number and into the margin on another page rather than have a page break in that source. So the pagination is off both in NOT making a break in mid notes in one case and in breaking after every line in another. I suspect the base problem is including Source text (which is long in some cases) in the Bibliography at all. I think this is a bug. Cary [EMAIL PROTECTED] Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Issue with Bibliography - V7
Cary: I previewed an Ancestor Book Report from my file (limited to only 3 generations) and found no problem with the bibliography. I wonder if it's possible that your trouble could be connected to just the one particular source template--and then would carry forward from that point on. I know there's a different sort of a problem specific to just the 1910 US census SourceWriter template and wonder if you could be seeing something similar. Did you use SourceWriter to create the problem source citation and, if so, which template did you use? Kirsten -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Behalf Of Cary Sent: Sunday, July 13, 2008 8:10 AM To: LegacyUserGroup@legacyfamilytree.com Subject: RE: [LegacyUG] Issue with Bibliography - V7 I'm desperate, so I tried to do this, BUT - None of the funky one line pages are in the reports or the Source Citations where I could change something. ALL of them are in the Bibliography. That's created by Legacy and there is no place for me to delete spaces etc. The first instance is in the listing for a web site where the source text includes the entire text of several gravestone epitaphs. Once that hit the bottom of a page, each line after that is on a separate page. Why would a bibliography include source text or comments anyway? The point of a bibliography is to be a LIST only. The paging problem did NOT occur on the same source in Source Citations. I also noted that the Bibliography continued below the page number and into the margin on another page rather than have a page break in that source. So the pagination is off both in NOT making a break in mid notes in one case and in breaking after every line in another. I suspect the base problem is including Source text (which is long in some cases) in the Bibliography at all. I think this is a bug. Cary [EMAIL PROTECTED] Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Issue with Bibliography - V7
I agree with you. We, (mostly you), have defined the bug to become repairable. They will be back at their offices abt 9AM Pacific Time USA, Monday. Then they need to study it. I know this doesn't help for now. Rich in LA CA --- Cary <[EMAIL PROTECTED]> wrote: > I'm desperate, so I tried to do this, BUT - None of > the funky one line pages > are in the reports or the Source Citations where I > could change something. > ALL of them are in the Bibliography. That's created > by Legacy and there is > no place for me to delete spaces etc. > > The first instance is in the listing for a web site > where the source text > includes the entire text of several gravestone > epitaphs. Once that hit the > bottom of a page, each line after that is on a > separate page. Why would a > bibliography include source text or comments anyway? > The point of a > bibliography is to be a LIST only. The paging > problem did NOT occur on the > same source in Source Citations. > > I also noted that the Bibliography continued below > the page number and into > the margin on another page rather than have a page > break in that source. So > the pagination is off both in NOT making a break in > mid notes in one case > and in breaking after every line in another. I > suspect the base problem is > including Source text (which is long in some cases) > in the Bibliography at > all. > > I think this is a bug. > > Cary > [EMAIL PROTECTED] > > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > On Behalf Of RICHARD > SCHULTHIES > Sent: Sunday, July 13, 2008 12:13 AM > To: LegacyUserGroup@legacyfamilytree.com > Subject: RE: [LegacyUG] Issue with Bibliography - V7 > > I also found that I had end-of-line, and end-of-page > stuck in the dumbest places. Print exactly one page > that has the big space. Then find the place you > typed > that info. Go to the last line of the typing. After > the last period, delete the next space. There may be > a > next-line or next-page thing hiding there. If so, > all > you need do is delete all the 'extra blanks'. It > took > me two weeks. > Rich in LA CA > --- Cary <[EMAIL PROTECTED]> wrote: > > > Good idea, I tried it, but the same thing is still > > happening. This time the > > entire report paged out to 1500 pages, with page > > after page with only one > > line. Can it be something about my sources that > > causes it? > > > > > > Cary > > [EMAIL PROTECTED] > > > > > > -Original Message- > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] > > On Behalf Of > > Sherry/Support > > Sent: Saturday, July 12, 2008 5:03 PM > > To: LegacyUserGroup@legacyfamilytree.com > > Subject: RE: [LegacyUG] Issue with Bibliography - > V7 > > > > The easiest thing to do is just reset the report > > options by clicking on the > > Reset button in the lower right corner of the main > > report options window > > > > Thanks for using Legacy. > > > > Sherry > > Customer Support > > Millennia Corporation > > [EMAIL PROTECTED] > > http://www.LegacyFamilyTree.com > > > > We are changing the world of genealogy! > > > > When replying to this message, please include all > > previous correspondence. > > Thanks. > > > > > > Original Message- > > > > > > -Original Message- > > From: [EMAIL PROTECTED] > > > [mailto:[EMAIL PROTECTED] > > On Behalf Of RICHARD > > SCHULTHIES > > Sent: Saturday, July 12, 2008 2:09 PM > > To: LegacyUserGroup@legacyfamilytree.com > > Subject: Re: [LegacyUG] Issue with Bibliography - > V7 > > > > This happened to me a year ago. I found I had > > checked > > a box by accident, and took a while to find, then > > forgot where I fixed it, but I am sure it is this > to > > look for. > > Rich in LA CA > > --- Cary <[EMAIL PROTECTED]> wrote: > > > > > Periodically I update an Ancestor book for a > > niece, > > > and because I have both > > > a lot of people and have created a lot of event > on > > > them it is a long PDF > > > file. With all generations and no source info > it > > is > > > 563 pages. With > > > sources and a Bibliography it went to nearly 900 > > > pages, many of which in the > > > bibliography only had only one line at the top > of > > > each page, the rest blank. > > > This has not h
RE: [LegacyUG] Issue with Bibliography - V7
I'm desperate, so I tried to do this, BUT - None of the funky one line pages are in the reports or the Source Citations where I could change something. ALL of them are in the Bibliography. That's created by Legacy and there is no place for me to delete spaces etc. The first instance is in the listing for a web site where the source text includes the entire text of several gravestone epitaphs. Once that hit the bottom of a page, each line after that is on a separate page. Why would a bibliography include source text or comments anyway? The point of a bibliography is to be a LIST only. The paging problem did NOT occur on the same source in Source Citations. I also noted that the Bibliography continued below the page number and into the margin on another page rather than have a page break in that source. So the pagination is off both in NOT making a break in mid notes in one case and in breaking after every line in another. I suspect the base problem is including Source text (which is long in some cases) in the Bibliography at all. I think this is a bug. Cary [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of RICHARD SCHULTHIES Sent: Sunday, July 13, 2008 12:13 AM To: LegacyUserGroup@legacyfamilytree.com Subject: RE: [LegacyUG] Issue with Bibliography - V7 I also found that I had end-of-line, and end-of-page stuck in the dumbest places. Print exactly one page that has the big space. Then find the place you typed that info. Go to the last line of the typing. After the last period, delete the next space. There may be a next-line or next-page thing hiding there. If so, all you need do is delete all the 'extra blanks'. It took me two weeks. Rich in LA CA --- Cary <[EMAIL PROTECTED]> wrote: > Good idea, I tried it, but the same thing is still > happening. This time the > entire report paged out to 1500 pages, with page > after page with only one > line. Can it be something about my sources that > causes it? > > > Cary > [EMAIL PROTECTED] > > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > On Behalf Of > Sherry/Support > Sent: Saturday, July 12, 2008 5:03 PM > To: LegacyUserGroup@legacyfamilytree.com > Subject: RE: [LegacyUG] Issue with Bibliography - V7 > > The easiest thing to do is just reset the report > options by clicking on the > Reset button in the lower right corner of the main > report options window > > Thanks for using Legacy. > > Sherry > Customer Support > Millennia Corporation > [EMAIL PROTECTED] > http://www.LegacyFamilyTree.com > > We are changing the world of genealogy! > > When replying to this message, please include all > previous correspondence. > Thanks. > > > Original Message- > > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > On Behalf Of RICHARD > SCHULTHIES > Sent: Saturday, July 12, 2008 2:09 PM > To: LegacyUserGroup@legacyfamilytree.com > Subject: Re: [LegacyUG] Issue with Bibliography - V7 > > This happened to me a year ago. I found I had > checked > a box by accident, and took a while to find, then > forgot where I fixed it, but I am sure it is this to > look for. > Rich in LA CA > --- Cary <[EMAIL PROTECTED]> wrote: > > > Periodically I update an Ancestor book for a > niece, > > and because I have both > > a lot of people and have created a lot of event on > > them it is a long PDF > > file. With all generations and no source info it > is > > 563 pages. With > > sources and a Bibliography it went to nearly 900 > > pages, many of which in the > > bibliography only had only one line at the top of > > each page, the rest blank. > > This has not happened with shorter reports. > > > > Any ideas what is happening? Am I doing something > > wrong that makes it move > > to a new page? Is there a bug? > > > > > > Cary > > [EMAIL PROTECTED] > > > > > > > > Legacy User Group guidelines: >http://www.LegacyFamilyTree.com/Etiquette.asp > Archived messages: > > http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ > Online technical support: > http://www.LegacyFamilyTree.com/Help.asp > To unsubscribe: > http://www.LegacyFamilyTree.com/LegacyLists.asp > > > > > > > > Legacy User Group guidelines: >http://www.LegacyFamilyTree.com/Etiquette.asp > Archived messages: > > http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ > Online technical support: > http://www.LegacyFamilyTree.com/Help.asp > To unsubscribe: > http://www.LegacyFa
RE: [LegacyUG] Issue with Bibliography - V7
I also found that I had end-of-line, and end-of-page stuck in the dumbest places. Print exactly one page that has the big space. Then find the place you typed that info. Go to the last line of the typing. After the last period, delete the next space. There may be a next-line or next-page thing hiding there. If so, all you need do is delete all the 'extra blanks'. It took me two weeks. Rich in LA CA --- Cary <[EMAIL PROTECTED]> wrote: > Good idea, I tried it, but the same thing is still > happening. This time the > entire report paged out to 1500 pages, with page > after page with only one > line. Can it be something about my sources that > causes it? > > > Cary > [EMAIL PROTECTED] > > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > On Behalf Of > Sherry/Support > Sent: Saturday, July 12, 2008 5:03 PM > To: LegacyUserGroup@legacyfamilytree.com > Subject: RE: [LegacyUG] Issue with Bibliography - V7 > > The easiest thing to do is just reset the report > options by clicking on the > Reset button in the lower right corner of the main > report options window > > Thanks for using Legacy. > > Sherry > Customer Support > Millennia Corporation > [EMAIL PROTECTED] > http://www.LegacyFamilyTree.com > > We are changing the world of genealogy! > > When replying to this message, please include all > previous correspondence. > Thanks. > > > Original Message- > > > -Original Message- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] > On Behalf Of RICHARD > SCHULTHIES > Sent: Saturday, July 12, 2008 2:09 PM > To: LegacyUserGroup@legacyfamilytree.com > Subject: Re: [LegacyUG] Issue with Bibliography - V7 > > This happened to me a year ago. I found I had > checked > a box by accident, and took a while to find, then > forgot where I fixed it, but I am sure it is this to > look for. > Rich in LA CA > --- Cary <[EMAIL PROTECTED]> wrote: > > > Periodically I update an Ancestor book for a > niece, > > and because I have both > > a lot of people and have created a lot of event on > > them it is a long PDF > > file. With all generations and no source info it > is > > 563 pages. With > > sources and a Bibliography it went to nearly 900 > > pages, many of which in the > > bibliography only had only one line at the top of > > each page, the rest blank. > > This has not happened with shorter reports. > > > > Any ideas what is happening? Am I doing something > > wrong that makes it move > > to a new page? Is there a bug? > > > > > > Cary > > [EMAIL PROTECTED] > > > > > > > > Legacy User Group guidelines: >http://www.LegacyFamilyTree.com/Etiquette.asp > Archived messages: > > http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ > Online technical support: > http://www.LegacyFamilyTree.com/Help.asp > To unsubscribe: > http://www.LegacyFamilyTree.com/LegacyLists.asp > > > > > > > > Legacy User Group guidelines: >http://www.LegacyFamilyTree.com/Etiquette.asp > Archived messages: > > http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ > Online technical support: > http://www.LegacyFamilyTree.com/Help.asp > To unsubscribe: > http://www.LegacyFamilyTree.com/LegacyLists.asp > > > > Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Issue with Bibliography - V7
Good idea, I tried it, but the same thing is still happening. This time the entire report paged out to 1500 pages, with page after page with only one line. Can it be something about my sources that causes it? Cary [EMAIL PROTECTED] -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Sherry/Support Sent: Saturday, July 12, 2008 5:03 PM To: LegacyUserGroup@legacyfamilytree.com Subject: RE: [LegacyUG] Issue with Bibliography - V7 The easiest thing to do is just reset the report options by clicking on the Reset button in the lower right corner of the main report options window Thanks for using Legacy. Sherry Customer Support Millennia Corporation [EMAIL PROTECTED] http://www.LegacyFamilyTree.com We are changing the world of genealogy! When replying to this message, please include all previous correspondence. Thanks. Original Message- -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of RICHARD SCHULTHIES Sent: Saturday, July 12, 2008 2:09 PM To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] Issue with Bibliography - V7 This happened to me a year ago. I found I had checked a box by accident, and took a while to find, then forgot where I fixed it, but I am sure it is this to look for. Rich in LA CA --- Cary <[EMAIL PROTECTED]> wrote: > Periodically I update an Ancestor book for a niece, > and because I have both > a lot of people and have created a lot of event on > them it is a long PDF > file. With all generations and no source info it is > 563 pages. With > sources and a Bibliography it went to nearly 900 > pages, many of which in the > bibliography only had only one line at the top of > each page, the rest blank. > This has not happened with shorter reports. > > Any ideas what is happening? Am I doing something > wrong that makes it move > to a new page? Is there a bug? > > > Cary > [EMAIL PROTECTED] > Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Issue with Bibliography - V7
The easiest thing to do is just reset the report options by clicking on the Reset button in the lower right corner of the main report options window Thanks for using Legacy. Sherry Customer Support Millennia Corporation [EMAIL PROTECTED] http://www.LegacyFamilyTree.com We are changing the world of genealogy! When replying to this message, please include all previous correspondence. Thanks. Original Message- -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of RICHARD SCHULTHIES Sent: Saturday, July 12, 2008 2:09 PM To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] Issue with Bibliography - V7 This happened to me a year ago. I found I had checked a box by accident, and took a while to find, then forgot where I fixed it, but I am sure it is this to look for. Rich in LA CA --- Cary <[EMAIL PROTECTED]> wrote: > Periodically I update an Ancestor book for a niece, > and because I have both > a lot of people and have created a lot of event on > them it is a long PDF > file. With all generations and no source info it is > 563 pages. With > sources and a Bibliography it went to nearly 900 > pages, many of which in the > bibliography only had only one line at the top of > each page, the rest blank. > This has not happened with shorter reports. > > Any ideas what is happening? Am I doing something > wrong that makes it move > to a new page? Is there a bug? > > > Cary > [EMAIL PROTECTED] > Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Issue with Bibliography - V7
This happened to me a year ago. I found I had checked a box by accident, and took a while to find, then forgot where I fixed it, but I am sure it is this to look for. Rich in LA CA --- Cary <[EMAIL PROTECTED]> wrote: > Periodically I update an Ancestor book for a niece, > and because I have both > a lot of people and have created a lot of event on > them it is a long PDF > file. With all generations and no source info it is > 563 pages. With > sources and a Bibliography it went to nearly 900 > pages, many of which in the > bibliography only had only one line at the top of > each page, the rest blank. > This has not happened with shorter reports. > > Any ideas what is happening? Am I doing something > wrong that makes it move > to a new page? Is there a bug? > > > Cary > [EMAIL PROTECTED] > > > > > > > Legacy User Group guidelines: >http://www.LegacyFamilyTree.com/Etiquette.asp > Archived messages: > > http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ > Online technical support: > http://www.LegacyFamilyTree.com/Help.asp > To unsubscribe: > http://www.LegacyFamilyTree.com/LegacyLists.asp > > > > Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Issue with Bibliography - V7
Periodically I update an Ancestor book for a niece, and because I have both a lot of people and have created a lot of event on them it is a long PDF file. With all generations and no source info it is 563 pages. With sources and a Bibliography it went to nearly 900 pages, many of which in the bibliography only had only one line at the top of each page, the rest blank. This has not happened with shorter reports. Any ideas what is happening? Am I doing something wrong that makes it move to a new page? Is there a bug? Cary [EMAIL PROTECTED] Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
