Re: [LegacyUG] half siblings do not show in all family views or charts
I have dumped Hotmail so all is OK now. The other point I was making (see also my reply to Alan Jones) was the need to link the kids to the marriage, as you would do for any child of the marriage, as well as just the biological parent. The set the relationship to the other parent as step/adopted/foster etc. Ron Ferguson _ New Tutorial: Embed Blogger RSS feed into your Website http://www.fergys.co.uk Includes the family tree for Alan J Grimshaw http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England http://myweb.tiscali.co.uk/fergys/ Branko and Chris wrote: Hi Ron, I think you may still have the email problem but I get the intent of your message. Having a somewhat better understanding of the strict Legacy rules clarified my dilemma. What I was doing is printing a descendents chart from higher up the tree thinking everybody would be included, but as they aren't blood relatives, only through marriage they didn't show up, but when I came down a generation on two they all appeared. What I was hoping for is to pick any point in the tree and it would chart everybody using marriage and their descendents rather than blood relationships. Many Thanks Branko and Chris Email us at: bcola...@bigpond.net.au Visit our website at: http://www.bc-cola.com -Original Message- From: k...@legacyfamilytree.com [mailto:k...@legacyfamilytree.com] On Behalf Of ronald ferguson Sent: Sunday, September 20, 2009 1:34 AM To: legacyusergroup@legacyfamilytree.com Subject: RE: [LegacyUG] half siblings do not show in all family views or charts Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 Hopefully (again) I have sorted out my posting problem!! Here is what I wro= te before: I don't think so. What you are seeing is the same effect as mentioned in he= r posts. The fact is that Legacy is very strict in its definition of a desc= endant being a blood relative. =20 However=2C I may not be understanding the problem correctly=2C because on m= y Descendant Charts the 1/2 kids do show up. What I do is to link step and = adopted kids=2C who I wish to show=2C to both/all sets of parents and speci= fy the relationship to their parents (although normally I would not include= this on the reports). =20 Maybe you could check this out using your DB.? Ron Ferguson _ New Tutorial: Embed a Blogger RSS feed on your webpage http://www.fergys.co.uk/ View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ From: bcola...@bigpond.net.au To: LegacyUserGroup@legacyfamilytree.com Subject: RE: [LegacyUG] half siblings do not show in all family views or = charts Date: Sat=2C 19 Sep 2009 14:34:35 +1000 Hi Ron=2C I'm also with you on this with messed up families and I believe I have a similar problem. I have a person who married 3 times and all his descende= nts share his paternal name but on charts there is always a part of his descendents that is omitted. I don't have the siblings tagged as half siblings. Is that my problem? If I want a complete chart I have to resort to merging 2-3 charts using T= ree Draw to create a single chart that show's them all. Many Thanks Branko and Chris Email us at: bcola...@bigpond.net.au Visit our website at: http://www.bc-cola.com =0A= Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] half siblings do not show in all family views or charts
Hi Ron, I think you may still have the email problem but I get the intent of your message. Having a somewhat better understanding of the strict Legacy rules clarified my dilemma. What I was doing is printing a descendents chart from higher up the tree thinking everybody would be included, but as they aren't blood relatives, only through marriage they didn't show up, but when I came down a generation on two they all appeared. What I was hoping for is to pick any point in the tree and it would chart everybody using marriage and their descendents rather than blood relationships. Many Thanks Branko and Chris Email us at: bcola...@bigpond.net.au Visit our website at: http://www.bc-cola.com -Original Message- From: k...@legacyfamilytree.com [mailto:k...@legacyfamilytree.com] On Behalf Of ronald ferguson Sent: Sunday, September 20, 2009 1:34 AM To: legacyusergroup@legacyfamilytree.com Subject: RE: [LegacyUG] half siblings do not show in all family views or charts Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 Hopefully (again) I have sorted out my posting problem!! Here is what I wro= te before: I don't think so. What you are seeing is the same effect as mentioned in he= r posts. The fact is that Legacy is very strict in its definition of a desc= endant being a blood relative. =20 However=2C I may not be understanding the problem correctly=2C because on m= y Descendant Charts the 1/2 kids do show up. What I do is to link step and = adopted kids=2C who I wish to show=2C to both/all sets of parents and speci= fy the relationship to their parents (although normally I would not include= this on the reports). =20 Maybe you could check this out using your DB.? Ron Ferguson _ New Tutorial: Embed a Blogger RSS feed on your webpage http://www.fergys.co.uk/ View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ > From: bcola...@bigpond.net.au > To: LegacyUserGroup@legacyfamilytree.com > Subject: RE: [LegacyUG] half siblings do not show in all family views > or = charts > Date: Sat=2C 19 Sep 2009 14:34:35 +1000 > > Hi Ron=2C > > I'm also with you on this with messed up families and I believe I have > a similar problem. I have a person who married 3 times and all his > descende= nts > share his paternal name but on charts there is always a part of his > descendents that is omitted. I don't have the siblings tagged as half > siblings. Is that my problem? > > If I want a complete chart I have to resort to merging 2-3 charts > using T= ree > Draw to create a single chart that show's them all. > > > > Many Thanks > Branko and Chris > > Email us at: bcola...@bigpond.net.au > Visit our website at: http://www.bc-cola.com =0A= _=0A= Share your photos with Windows Live Photos =96 Free.=0A= http://clk.atdmt.com/UKM/go/134665338/direct/01/= Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] half siblings do not show in all family views or charts
Thank you Brett, I will have a look at that - I was using Hotmail but have now dumped it. Ron Ferguson _ New Tutorial: Embed Blogger RSS feed into your Website http://www.fergys.co.uk Includes the family tree for Alan J Grimshaw http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England http://myweb.tiscali.co.uk/fergys/ BMcL Robinson wrote: Hi Ron You appear to have an email problem that may be fixed by (assuming you are using something with a similar setup to Outlook Express - the wording may be a bit different): Go to Tools/Options/Send - Mail Sending - Plain Text Settings - MIME - encode text - select "none", not "quoted printable" Cheers, Brett BMcL Robinson Tel +64 7 856 6582, 0277 500 714, fax +64 7 856 6582, Skype ab1252 PO Box 1252, Hamilton 3240, New Zealand - Original Message - From: "ronald ferguson" To: Sent: Sunday, September 20, 2009 6:48 AM Subject: RE: [LegacyUG] half siblings do not show in all family views or charts <77631.60783...@web82001.mail.mud.yahoo.com> Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 Michele=2C It's Hotmail=2C mind you as I said to Mike a while back I have unsubbed fro= m Legacy=2C but I am still getting mail to this address. Guess I will just = have to keep removing this address until Legacy notices! Ron Ferguson Date: Sat=2C 19 Sep 2009 10:56:38 -0700 From: paula.ryb...@sbcglobal.net Subject: Re: [LegacyUG] half siblings do not show in all family views or = charts To: LegacyUserGroup@legacyfamilytree.com Ron=2C What email are you using? I just got an update to my ATT Yahoo M= ail and had to reset the Plain Text thing. It still doesn't LOOK like plai= n text to me=2C but it is. Maybe you've had a minor (they would say) chang= e to your email program? --Paula in Texas Researching: Adair Baker Betz Bigley Blagrave Burton Chapman Clement Clou= gh Coppernoll Costine Daulton Dinwiddie Doody Ellis Exline Field Floran Flo= yd Gates Goodale Gordon Gump Harbaugh Hopkins Hughes Jones Koyle Laswell Mc= Donald Misner Passwaters Pelton Roberts Roche Ryburn Sullivan Williams - Original Message From: ronald ferguson=20 To: legacyusergroup@legacyfamilytree.com Sent: Saturday=2C September 19=2C 2009 11:56:35 AM Subject: RE: [LegacyUG] half siblings do not show in all family views or = charts <040601ca3945$02c741a0$6801a...@moonlight2> Content-Type: text/plain=3B charset=3D"iso-8859-1" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 Certainly is Diane=3D2C I even know what they are=3D2C but can't get rid!= Also =3D seems related to the length of the post. Ron Ferguson =0A= Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] half siblings do not show in all family views or charts
Hi Ron You appear to have an email problem that may be fixed by (assuming you are using something with a similar setup to Outlook Express - the wording may be a bit different): Go to Tools/Options/Send - Mail Sending - Plain Text Settings - MIME - encode text - select "none", not "quoted printable" Cheers, Brett BMcL Robinson Tel +64 7 856 6582, 0277 500 714, fax +64 7 856 6582, Skype ab1252 PO Box 1252, Hamilton 3240, New Zealand - Original Message - From: "ronald ferguson" To: Sent: Sunday, September 20, 2009 6:48 AM Subject: RE: [LegacyUG] half siblings do not show in all family views or charts <77631.60783...@web82001.mail.mud.yahoo.com> Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 Michele=2C It's Hotmail=2C mind you as I said to Mike a while back I have unsubbed fro= m Legacy=2C but I am still getting mail to this address. Guess I will just = have to keep removing this address until Legacy notices! Ron Ferguson > Date: Sat=2C 19 Sep 2009 10:56:38 -0700 > From: paula.ryb...@sbcglobal.net > Subject: Re: [LegacyUG] half siblings do not show in all family views or = charts > To: LegacyUserGroup@legacyfamilytree.com > > Ron=2C What email are you using? I just got an update to my ATT Yahoo M= ail and had to reset the Plain Text thing. It still doesn't LOOK like plai= n text to me=2C but it is. Maybe you've had a minor (they would say) chang= e to your email program? > --Paula in Texas > Researching: Adair Baker Betz Bigley Blagrave Burton Chapman Clement Clou= gh Coppernoll Costine Daulton Dinwiddie Doody Ellis Exline Field Floran Flo= yd Gates Goodale Gordon Gump Harbaugh Hopkins Hughes Jones Koyle Laswell Mc= Donald Misner Passwaters Pelton Roberts Roche Ryburn Sullivan Williams > > > > - Original Message > From: ronald ferguson=20 > To: legacyusergroup@legacyfamilytree.com > Sent: Saturday=2C September 19=2C 2009 11:56:35 AM > Subject: RE: [LegacyUG] half siblings do not show in all family views or = charts > > > <040601ca3945$02c741a0$6801a...@moonlight2> > Content-Type: text/plain=3B charset=3D"iso-8859-1" > Content-Transfer-Encoding: quoted-printable > MIME-Version: 1.0 > > > Certainly is Diane=3D2C I even know what they are=3D2C but can't get rid!= Also =3D > seems related to the length of the post. > > > > Ron Ferguson =0A= Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] half siblings do not show in all family views or charts
<77631.60783...@web82001.mail.mud.yahoo.com> Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 Michele=2C It's Hotmail=2C mind you as I said to Mike a while back I have unsubbed fro= m Legacy=2C but I am still getting mail to this address. Guess I will just = have to keep removing this address until Legacy notices! Ron Ferguson _ New Tutorial: Embed a Blogger RSS feed on your webpage http://www.fergys.co.uk/ View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ > Date: Sat=2C 19 Sep 2009 10:56:38 -0700 > From: paula.ryb...@sbcglobal.net > Subject: Re: [LegacyUG] half siblings do not show in all family views or = charts > To: LegacyUserGroup@legacyfamilytree.com > > Ron=2C What email are you using? I just got an update to my ATT Yahoo M= ail and had to reset the Plain Text thing. It still doesn't LOOK like plai= n text to me=2C but it is. Maybe you've had a minor (they would say) chang= e to your email program? > --Paula in Texas > Researching: Adair Baker Betz Bigley Blagrave Burton Chapman Clement Clou= gh Coppernoll Costine Daulton Dinwiddie Doody Ellis Exline Field Floran Flo= yd Gates Goodale Gordon Gump Harbaugh Hopkins Hughes Jones Koyle Laswell Mc= Donald Misner Passwaters Pelton Roberts Roche Ryburn Sullivan Williams > > > > - Original Message > From: ronald ferguson=20 > To: legacyusergroup@legacyfamilytree.com > Sent: Saturday=2C September 19=2C 2009 11:56:35 AM > Subject: RE: [LegacyUG] half siblings do not show in all family views or = charts > > > <040601ca3945$02c741a0$6801a...@moonlight2> > Content-Type: text/plain=3B charset=3D"iso-8859-1" > Content-Transfer-Encoding: quoted-printable > MIME-Version: 1.0 > > > Certainly is Diane=3D2C I even know what they are=3D2C but can't get rid!= Also =3D > seems related to the length of the post. > > > > Ron Ferguson =0A= _=0A= Share your photos with Windows Live Photos =96 Free.=0A= http://clk.atdmt.com/UKM/go/134665338/direct/01/= Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] half siblings do not show in all family views or charts
<4ab50d31.8040...@iafrica.com> Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 Thanks=2C Mike=2C but I have it! just can't get it to work. About an hour a= go I unsubbed from this address and registered another- Well Ron Ferguson _ New Tutorial: Embed a Blogger RSS feed on your webpage http://www.fergys.co.uk/ View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ > Date: Sat=2C 19 Sep 2009 18:56:17 +0200 > From: mike...@iafrica.com > To: LegacyUserGroup@legacyfamilytree.com > Subject: Re: [LegacyUG] half siblings do not show in all family views or = charts > > ronald ferguson wrote: >>=20 >> Content-Type: text/plain=3B charset=3D"Windows-1252" >> Content-Transfer-Encoding: quoted-printable >> MIME-Version: 1.0 >> >> >> >> Hopefully (again) I have sorted out my posting problem!! Here is what I = wro=3D >> te before: >> > > Nope! Something is still screwed up. For some reason=2C you appear to be > sending your messages as 'quoted-printable'. I can send you the full > message source if you want. > > > -- > Best regards=2C > Mike Fry > Johannesburg. =0A= _=0A= Get the best of MSN on your mobile=0A= http://clk.atdmt.com/UKM/go/147991039/direct/01/= Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] half siblings do not show in all family views or charts
Ron, What email are you using? I just got an update to my ATT Yahoo Mail and had to reset the Plain Text thing. It still doesn't LOOK like plain text to me, but it is. Maybe you've had a minor (they would say) change to your email program? --Paula in Texas Researching: Adair Baker Betz Bigley Blagrave Burton Chapman Clement Clough Coppernoll Costine Daulton Dinwiddie Doody Ellis Exline Field Floran Floyd Gates Goodale Gordon Gump Harbaugh Hopkins Hughes Jones Koyle Laswell McDonald Misner Passwaters Pelton Roberts Roche Ryburn Sullivan Williams - Original Message From: ronald ferguson To: legacyusergroup@legacyfamilytree.com Sent: Saturday, September 19, 2009 11:56:35 AM Subject: RE: [LegacyUG] half siblings do not show in all family views or charts <040601ca3945$02c741a0$6801a...@moonlight2> Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 Certainly is Diane=2C I even know what they are=2C but can't get rid! Also = seems related to the length of the post. Ron Ferguson Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] half siblings do not show in all family views or charts
<040601ca3945$02c741a0$6801a...@moonlight2> Content-Type: text/plain; charset="iso-8859-1" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 Certainly is Diane=2C I even know what they are=2C but can't get rid! Also = seems related to the length of the post. Ron Ferguson _ New Tutorial: Embed a Blogger RSS feed on your webpage http://www.fergys.co.uk/ View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ > From: djearn...@cox.net > To: LegacyUserGroup@legacyfamilytree.com > Subject: RE: [LegacyUG] half siblings do not show in all family views or = charts > Date: Sat=2C 19 Sep 2009 09:19:48 -0700 > > Your posting problems continue. Looks like an equal sign (=3D) at the end= of > every line and =3D2C instead of a comma and =3D20 between paragraphs. > > Very odd! > > > Dianne Arnold > djearn...@cox.net > 651-994-0305 (St. Paul=2C MN) > 760-479-0632 (Encinitas=2C CA) > > -Original Message- > From: k...@legacyfamilytree.com [mailto:k...@legacyfamilytree.com] On Behal= f > Of ronald ferguson > Sent: Saturday=2C September 19=2C 2009 8:34 AM > To: legacyusergroup@legacyfamilytree.com > Subject: RE: [LegacyUG] half siblings do not show in all family views or > charts > > >=20 > Content-Type: text/plain=3B charset=3D"Windows-1252" > Content-Transfer-Encoding: quoted-printable > MIME-Version: 1.0 > > > > Hopefully (again) I have sorted out my posting problem!! Here is what I w= ro=3D > te before: > > > > I don't think so. What you are seeing is the same effect as mentioned in = he=3D > r posts. The fact is that Legacy is very strict in its definition of a de= sc=3D > endant being a blood relative. > =3D20 > However=3D2C I may not be understanding the problem correctly=3D2C becaus= e on m=3D > y Descendant Charts the 1/2 kids do show up. What I do is to link step an= d =3D > adopted kids=3D2C who I wish to show=3D2C to both/all sets of parents and= speci=3D > fy the relationship to their parents (although normally I would not inclu= de=3D > this on the reports). > =3D20 > Maybe you could check this out using your DB.? > > > > > Ron Ferguson > > _ > > New Tutorial: Embed a Blogger RSS feed on your webpage > http://www.fergys.co.uk/ > View the Grimshaw Family Tree at: > http://www.fergys.co.uk/Grimshaw/ > For The Fergusons of N.W. England See: > http://myweb.tiscali.co.uk/fergys/ > _____ > > > > > > > >> From: bcola...@bigpond.net.au >> To: LegacyUserGroup@legacyfamilytree.com >> Subject: RE: [LegacyUG] half siblings do not show in all family views or= =3D > charts >> Date: Sat=3D2C 19 Sep 2009 14:34:35 +1000 >> >> Hi Ron=3D2C >> >> I'm also with you on this with messed up families and I believe I have a >> similar problem. I have a person who married 3 times and all his descend= e=3D > nts >> share his paternal name but on charts there is always a part of his >> descendents that is omitted. I don't have the siblings tagged as half >> siblings. Is that my problem? >> >> If I want a complete chart I have to resort to merging 2-3 charts using = T=3D > ree >> Draw to create a single chart that show's them all. >> >> >> >> Many Thanks >> Branko and Chris >> >> Email us at: bcola...@bigpond.net.au >> Visit our website at: http://www.bc-cola.com > =0A= _=0A= Get the best of MSN on your mobile=0A= http://clk.atdmt.com/UKM/go/147991039/direct/01/= Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] half siblings do not show in all family views or charts
ronald ferguson wrote: Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 Hopefully (again) I have sorted out my posting problem!! Here is what I wro= te before: Nope! Something is still screwed up. For some reason, you appear to be sending your messages as 'quoted-printable'. I can send you the full message source if you want. -- Best regards, Mike Fry Johannesburg. Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] half siblings do not show in all family views or charts
Your posting problems continue. Looks like an equal sign (=) at the end of every line and =2C instead of a comma and =20 between paragraphs. Very odd! Dianne Arnold djearn...@cox.net 651-994-0305 (St. Paul, MN) 760-479-0632 (Encinitas, CA) -Original Message- From: k...@legacyfamilytree.com [mailto:k...@legacyfamilytree.com] On Behalf Of ronald ferguson Sent: Saturday, September 19, 2009 8:34 AM To: legacyusergroup@legacyfamilytree.com Subject: RE: [LegacyUG] half siblings do not show in all family views or charts Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 Hopefully (again) I have sorted out my posting problem!! Here is what I wro= te before: I don't think so. What you are seeing is the same effect as mentioned in he= r posts. The fact is that Legacy is very strict in its definition of a desc= endant being a blood relative. =20 However=2C I may not be understanding the problem correctly=2C because on m= y Descendant Charts the 1/2 kids do show up. What I do is to link step and = adopted kids=2C who I wish to show=2C to both/all sets of parents and speci= fy the relationship to their parents (although normally I would not include= this on the reports). =20 Maybe you could check this out using your DB.? Ron Ferguson _ New Tutorial: Embed a Blogger RSS feed on your webpage http://www.fergys.co.uk/ View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ > From: bcola...@bigpond.net.au > To: LegacyUserGroup@legacyfamilytree.com > Subject: RE: [LegacyUG] half siblings do not show in all family views or = charts > Date: Sat=2C 19 Sep 2009 14:34:35 +1000 > > Hi Ron=2C > > I'm also with you on this with messed up families and I believe I have a > similar problem. I have a person who married 3 times and all his descende= nts > share his paternal name but on charts there is always a part of his > descendents that is omitted. I don't have the siblings tagged as half > siblings. Is that my problem? > > If I want a complete chart I have to resort to merging 2-3 charts using T= ree > Draw to create a single chart that show's them all. > > > > Many Thanks > Branko and Chris > > Email us at: bcola...@bigpond.net.au > Visit our website at: http://www.bc-cola.com =0A= _=0A= Share your photos with Windows Live Photos =96 Free.=0A= http://clk.atdmt.com/UKM/go/134665338/direct/01/= Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] half siblings do not show in all family views or charts
Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 Hopefully (again) I have sorted out my posting problem!! Here is what I wro= te before: I don't think so. What you are seeing is the same effect as mentioned in he= r posts. The fact is that Legacy is very strict in its definition of a desc= endant being a blood relative. =20 However=2C I may not be understanding the problem correctly=2C because on m= y Descendant Charts the 1/2 kids do show up. What I do is to link step and = adopted kids=2C who I wish to show=2C to both/all sets of parents and speci= fy the relationship to their parents (although normally I would not include= this on the reports). =20 Maybe you could check this out using your DB.? Ron Ferguson _ New Tutorial: Embed a Blogger RSS feed on your webpage http://www.fergys.co.uk/ View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ > From: bcola...@bigpond.net.au > To: LegacyUserGroup@legacyfamilytree.com > Subject: RE: [LegacyUG] half siblings do not show in all family views or = charts > Date: Sat=2C 19 Sep 2009 14:34:35 +1000 > > Hi Ron=2C > > I'm also with you on this with messed up families and I believe I have a > similar problem. I have a person who married 3 times and all his descende= nts > share his paternal name but on charts there is always a part of his > descendents that is omitted. I don't have the siblings tagged as half > siblings. Is that my problem? > > If I want a complete chart I have to resort to merging 2-3 charts using T= ree > Draw to create a single chart that show's them all. > > > > Many Thanks > Branko and Chris > > Email us at: bcola...@bigpond.net.au > Visit our website at: http://www.bc-cola.com =0A= _=0A= Share your photos with Windows Live Photos =96 Free.=0A= http://clk.atdmt.com/UKM/go/134665338/direct/01/= Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] half siblings do not show in all family views or charts
Content-Type: text/plain; charset="Windows-1252" Content-Transfer-Encoding: quoted-printable MIME-Version: 1.0 I don't think so. What you are seeing is the same effect as mentioned in ot= her posts. The fact is that Legacy is very strict in its definition of a de= scendant being a blood relative. However=2C I may not be understanding the problem correctly=2C because on m= y Descendant Charts the 1/2 kids do show up. What I do is to link step and = adopted kids=2C who I wish to show=2C to both/all sets of parents and speci= fy the relationship to their parents (although normally I would not include= this on the reports). Maybe you could check this out using your DB.? I hope my email problems of yesterday have now gone away :-)=2C If not my a= pologies! Ron Ferguson _ New Tutorial: Embed a Blogger RSS feed on your webpage http://www.fergys.co.uk/ View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ > From: bcola...@bigpond.net.au > To: LegacyUserGroup@legacyfamilytree.com > Subject: RE: [LegacyUG] half siblings do not show in all family views or = charts > Date: Sat=2C 19 Sep 2009 14:34:35 +1000 > > Hi Ron=2C > > I'm also with you on this with messed up families and I believe I have a > similar problem. I have a person who married 3 times and all his descende= nts > share his paternal name but on charts there is always a part of his > descendents that is omitted. I don't have the siblings tagged as half > siblings. Is that my problem? > > If I want a complete chart I have to resort to merging 2-3 charts using T= ree > Draw to create a single chart that show's them all. > > > > Many Thanks > Branko and Chris > > Email us at: bcola...@bigpond.net.au > Visit our website at: http://www.bc-cola.com > > -Original Message- > From: k...@legacyfamilytree.com [mailto:k...@legacyfamilytree.com] On Behal= f > Of ronald ferguson > Sent: Sunday=2C September 13=2C 2009 6:41 PM > To: legacyusergroup@legacyfamilytree.com > Subject: RE: [LegacyUG] half siblings do not show in all family views > > > > Thena=2C > > I do hate complicated messed up families=2C I have some myself=2C so you = have my > sympathies! > > Thank you for the table it is so much easier to see what is going on when > set down like that rather than in words. > > Following this table I constructed the family=2C with=2C perhaps=2C one > difference: I actually named the unknown partners "First Unknown" and > "Second Unknown"=2C mainly so that I could identify the two separate unkn= own > fathers. > > I then unlinked all the marriages using the *mother* as the base person i= n > every case. I am not saying it won't work using the father just that I > didn't and it may be different. After all the unlinking you will see that > the mother still has 3 (now) "unknown" partners as the kids are still > linked=2C *Delete* (not unlink) these "marriage links". > > Now I reconstructed the families in *the order in which they were created= * - > as per your table - noting whether the families were not married and/or > didn't have children as I went along. I also added the appropriate child = as > I went along. > > This resulted in families with all the 1/2 kids intact. Then I deleted th= e > "First Unknown" and the result was exactly as you described. On adding th= e > name "First Unknown" then for *all* families the 1/2 kids were correct. T= his > also applies=2C as one would expect to the "Second Unknown" > > Finally=2C I deleted the given name "First" just leaving the surname as > "Unknown" for the first unknown and all families were still correct. > Similarly for the "Second Unknown" > > I can understand why this happens and I am not certain it is a bug=2C but= it > does seem that where there are two unknown partners then both of them mus= t > specifically have a name - even both are the same eg. "Unknown". > > I hope this helps. > > Ron Ferguson > > _ > > New Tutorial: Embed a Blogger RSS feed on your webpage > http://www.fergys.co.uk/ View the Grimshaw Family Tree at: > http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: > http://myweb.tiscali.co.uk/fergys/ > _ > > > > > > > --
RE: [LegacyUG] half siblings do not show in all family views or charts
Hi Ron, I'm also with you on this with messed up families and I believe I have a similar problem. I have a person who married 3 times and all his descendents share his paternal name but on charts there is always a part of his descendents that is omitted. I don't have the siblings tagged as half siblings. Is that my problem? If I want a complete chart I have to resort to merging 2-3 charts using Tree Draw to create a single chart that show's them all. Many Thanks Branko and Chris Email us at: bcola...@bigpond.net.au Visit our website at: http://www.bc-cola.com -Original Message- From: k...@legacyfamilytree.com [mailto:k...@legacyfamilytree.com] On Behalf Of ronald ferguson Sent: Sunday, September 13, 2009 6:41 PM To: legacyusergroup@legacyfamilytree.com Subject: RE: [LegacyUG] half siblings do not show in all family views Thena, I do hate complicated messed up families, I have some myself, so you have my sympathies! Thank you for the table it is so much easier to see what is going on when set down like that rather than in words. Following this table I constructed the family, with, perhaps, one difference: I actually named the unknown partners "First Unknown" and "Second Unknown", mainly so that I could identify the two separate unknown fathers. I then unlinked all the marriages using the *mother* as the base person in every case. I am not saying it won't work using the father just that I didn't and it may be different. After all the unlinking you will see that the mother still has 3 (now) "unknown" partners as the kids are still linked, *Delete* (not unlink) these "marriage links". Now I reconstructed the families in *the order in which they were created* - as per your table - noting whether the families were not married and/or didn't have children as I went along. I also added the appropriate child as I went along. This resulted in families with all the 1/2 kids intact. Then I deleted the "First Unknown" and the result was exactly as you described. On adding the name "First Unknown" then for *all* families the 1/2 kids were correct. This also applies, as one would expect to the "Second Unknown" Finally, I deleted the given name "First" just leaving the surname as "Unknown" for the first unknown and all families were still correct. Similarly for the "Second Unknown" I can understand why this happens and I am not certain it is a bug, but it does seem that where there are two unknown partners then both of them must specifically have a name - even both are the same eg. "Unknown". I hope this helps. Ron Ferguson _ New Tutorial: Embed a Blogger RSS feed on your webpage http://www.fergys.co.uk/ View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _____ ---- > From: tsjone...@verizon.net > To: LegacyUserGroup@legacyfamilytree.com > Subject: [LegacyUG] half siblings do not show in all family views > Date: Sat, 12 Sep 2009 11:57:35 -0400 > > Hello, > > Not all of the half-siblings appear in children's lists of the > mother's 5 Family Views. I have selected to "show 1/2 kids." This is a > complicated family and I hope I am clear about this. > > (I am using version 7.0.0.109, on Windows Vista.) > > The mother had three children, all different fathers. She was married > twice (no children), and had children from 3 relationships. I have the > name of one of those fathers. Originally I did not have the children > assigned to correct fathers; I had assigned them to the two husbands. > > When I found more information on their parentage, I fixed the family > like > this: > > I unlinked all children. I added another husband (the known > relationship), and edited the marriage to show they were not married. > Now I had 3 named males, linked as spouses/relationships to the > mother. So far so good. > > Then I added back the children, in order of birth. For the 1st and 3rd > children, I selected that child and added the mother only (link to > existing person). For the second child, I used the family view that > showed his mother and father, and added the son (link to existing > person). > > When I bring up the mother's Spouse list and select either of the > entries for "unknown", one of the children - one of the 2 daughters - > disappears from the children list. > > 1. Husband1 - no children family view shows all 3 children > 2. unknown - child 1 family view shows his child, and > child 2 > 3. Husband2 - no childr
Re: [LegacyUG] half siblings do not show in all family views
Only if the bug bothers you. I was just letting the original poster know that it was not just an anomaly of their database, but that it exists elsewhere. I see no reason why I can't have 2 unknown "fathers" (auto created) associated with the mother and kids as that was the situation. I have seen no other problems show up with these families - and for me it is a minor annoyance that I would rather have then to create actual records for the fathers. That was a decision I made when I first noticed the problem, and I chose not to make the records for the unknown fathers. As a programmer (not of Legacy), I can even see how this bug would likely have occurred in code - or in the logic used to create the list of 1/2 kids. - It is a problem that does not bother me. I let support know about it but it isn't a high priority to me. Just wanted to let the poster know that they are not alone in seeing it. But thanks Ron, for going to the effort of recreating it and coming up with the work around. On Wed, Sep 16, 2009 at 10:12 PM, ronald ferguson wrote: > > Heather, > > Please see my response to the OP. When there are more than one unknown > fathers it is necessary to specifically use the name "Unknown" (or anything > else) for *both* unknowns. > >
RE: [LegacyUG] half siblings do not show in all family views
Heather, Please see my response to the OP. When there are more than one unknown fathers it is necessary to specifically use the name "Unknown" (or anything else) for *both* unknowns. Ron Ferguson _ New Tutorial: Embed a Blogger RSS feed on your webpage http://www.fergys.co.uk/ View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ > Date: Wed, 16 Sep 2009 20:03:17 -0500 > Subject: Re: [LegacyUG] half siblings do not show in all family views > From: hstov...@gmail.com > To: LegacyUserGroup@legacyfamilytree.com > > I have seen this happen in my file too - and I am 95% sure I reported it, but > I might not have. (And when I say reported it - I mean to support.) > > I have a woman who had some kids illigit - and I don't know the father. Then > she married and had a few more. (just to make it more complicated, he was > married before and had kids before too but that doesn't affect this.) He > died, and then a number of years later, she had another child - and the only > place a father is mentioned, it is the long-deceased husband so it > appears that he was illigit too. > > > I don't use people named unknown - I just let the program put in unknown. > > So I have the first children linked to mom, with an auto-generated unknown > father. > Then the next children linked to her and her husband > > The last child linked to mom, with a different auto-generated unknown father. > > When viewing the family with the mom and either of the unknown fathers, the > children of the other unknown father are not shown. They all show up > correctly when viewing the family of the mom and her husband. > > > As I only have this situation once in my own files, and it is a family I am > working with a lot, I just remember the little bug. To me it is more of an > annoyance than anything, as I find the show 1/2 kids as a huge bonus I had > never expected or had in any other program i have used. > > > These people were entered a LONG time ago, so I don't remember the order I > used to enter them or link them - but I'm not sure that matters. > > > On Sat, Sep 12, 2009 at 10:57 AM, Thena Jones> wrote: > > Hello, > > > > Not all of the half-siblings appear in children's lists of the mother's 5 > > Family Views. I have selected to "show 1/2 kids." This is a complicated > > family and I hope I am clear about this. > > > > (I am using version 7.0.0.109, on Windows Vista.) > > > When I bring up the mother's Spouse list and select either of the entries > > for "unknown", one of the children - one of the 2 daughters - disappears > > from the children list. > > _ Use Hotmail to send and receive mail from your different email accounts. http://clk.atdmt.com/UKM/go/167688463/direct/01/ Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] half siblings do not show in all family views
I have seen this happen in my file too - and I am 95% sure I reported it, but I might not have. (And when I say reported it - I mean to support.) I have a woman who had some kids illigit - and I don't know the father. Then she married and had a few more. (just to make it more complicated, he was married before and had kids before too but that doesn't affect this.) He died, and then a number of years later, she had another child - and the only place a father is mentioned, it is the long-deceased husband so it appears that he was illigit too. I don't use people named unknown - I just let the program put in unknown. So I have the first children linked to mom, with an auto-generated unknown father. Then the next children linked to her and her husband The last child linked to mom, with a different auto-generated unknown father. When viewing the family with the mom and either of the unknown fathers, the children of the other unknown father are not shown. They all show up correctly when viewing the family of the mom and her husband. As I only have this situation once in my own files, and it is a family I am working with a lot, I just remember the little bug. To me it is more of an annoyance than anything, as I find the show 1/2 kids as a huge bonus I had never expected or had in any other program i have used. These people were entered a LONG time ago, so I don't remember the order I used to enter them or link them - but I'm not sure that matters. On Sat, Sep 12, 2009 at 10:57 AM, Thena Jones wrote: > Hello, > > Not all of the half-siblings appear in children's lists of the mother's 5 > Family Views. I have selected to "show 1/2 kids." This is a complicated > family and I hope I am clear about this. > > (I am using version 7.0.0.109, on Windows Vista.) > > When I bring up the mother's Spouse list and select either of the entries > for "unknown", one of the children - one of the 2 daughters - disappears > from the children list. > >
RE: [LegacyUG] half siblings do not show in all family views
Thena, As I suggested, should you wish you can leave both of the unknown fathers with the surname of "Unknown". Ron Ferguson _ New Tutorial: Embed a Blogger RSS feed on your webpage http://www.fergys.co.uk/ View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ > From: tsjone...@verizon.net > To: LegacyUserGroup@legacyfamilytree.com > Subject: RE: [LegacyUG] half siblings do not show in all family views > Date: Sun, 13 Sep 2009 17:00:57 -0400 > > Hi Ron, > > Both of your messages came through. Oddly enough, mine also took several > hours before it appeared. > > I followed your steps; and as you said, it made all the children appear > correctly in all family views. > > Looks like this is one time when we have to add spouses with fake names > instead of adding the mother to the children (without adding a father to > each child). > > I thought, for a few minutes, that deleting the first name FIRST from First > Unknown made him and his child disappear. Wrong. I was also experimenting > with setting both Mr. Unknowns to Private, and I accidentally set that > marriage to private instead of the person. So, of course, he and the child > disappeared. I cleared the checkmark and they were back. > > Thanks for working through this. > > --Thena > > > > > -Original Message- > From: k...@legacyfamilytree.com [mailto:k...@legacyfamilytree.com] On Behalf > Of ronald ferguson > Sent: Sunday, September 13, 2009 4:41 AM > To: legacyusergroup@legacyfamilytree.com > Subject: RE: [LegacyUG] half siblings do not show in all family views > > > Thena, > > I do hate complicated messed up families, I have some myself, so you have my > sympathies! > > Thank you for the table it is so much easier to see what is going on when > set down like that rather than in words. > > Following this table I constructed the family, with, perhaps, one > difference: I actually named the unknown partners "First Unknown" and > "Second Unknown", mainly so that I could identify the two separate unknown > fathers. > > I then unlinked all the marriages using the *mother* as the base person in > every case. I am not saying it won't work using the father just that I > didn't and it may be different. After all the unlinking you will see that > the mother still has 3 (now) "unknown" partners as the kids are still > linked, *Delete* (not unlink) these "marriage links". > > Now I reconstructed the families in *the order in which they were created* - > as per your table - noting whether the families were not married and/or > didn't have children as I went along. I also added the appropriate child as > I went along. > > This resulted in families with all the 1/2 kids intact. Then I deleted the > "First Unknown" and the result was exactly as you described. On adding the > name "First Unknown" then for *all* families the 1/2 kids were correct. This > also applies, as one would expect to the "Second Unknown" > > Finally, I deleted the given name "First" just leaving the surname as > "Unknown" for the first unknown and all families were still correct. > Similarly for the "Second Unknown" > > I can understand why this happens and I am not certain it is a bug, but it > does seem that where there are two unknown partners then both of them must > specifically have a name - even both are the same eg. "Unknown". > > I hope this helps. > > Ron Ferguson > > _ > > New Tutorial: Embed a Blogger RSS feed on your webpage > http://www.fergys.co.uk/ > View the Grimshaw Family Tree at: > http://www.fergys.co.uk/Grimshaw/ > For The Fergusons of N.W. England See: > http://myweb.tiscali.co.uk/fergys/ > _ > > > > > > > >> From: tsjone...@verizon.net >> To: LegacyUserGroup@legacyfamilytree.com >> Subject: [LegacyUG] half siblings do not show in all family views >> Date: Sat, 12 Sep 2009 11:57:35 -0400 >> >> Hello, >> >> Not all of the half-siblings appear in children's lists of the mother's 5 >> Family Views. I have selected to "show 1/2 kids." This is a complicated >> family and I hope I am clear about this. >> >> (I am
RE: [LegacyUG] half siblings do not show in all family views
Hi Ron, Both of your messages came through. Oddly enough, mine also took several hours before it appeared. I followed your steps; and as you said, it made all the children appear correctly in all family views. Looks like this is one time when we have to add spouses with fake names instead of adding the mother to the children (without adding a father to each child). I thought, for a few minutes, that deleting the first name FIRST from First Unknown made him and his child disappear. Wrong. I was also experimenting with setting both Mr. Unknowns to Private, and I accidentally set that marriage to private instead of the person. So, of course, he and the child disappeared. I cleared the checkmark and they were back. Thanks for working through this. --Thena -Original Message- From: k...@legacyfamilytree.com [mailto:k...@legacyfamilytree.com] On Behalf Of ronald ferguson Sent: Sunday, September 13, 2009 4:41 AM To: legacyusergroup@legacyfamilytree.com Subject: RE: [LegacyUG] half siblings do not show in all family views Thena, I do hate complicated messed up families, I have some myself, so you have my sympathies! Thank you for the table it is so much easier to see what is going on when set down like that rather than in words. Following this table I constructed the family, with, perhaps, one difference: I actually named the unknown partners "First Unknown" and "Second Unknown", mainly so that I could identify the two separate unknown fathers. I then unlinked all the marriages using the *mother* as the base person in every case. I am not saying it won't work using the father just that I didn't and it may be different. After all the unlinking you will see that the mother still has 3 (now) "unknown" partners as the kids are still linked, *Delete* (not unlink) these "marriage links". Now I reconstructed the families in *the order in which they were created* - as per your table - noting whether the families were not married and/or didn't have children as I went along. I also added the appropriate child as I went along. This resulted in families with all the 1/2 kids intact. Then I deleted the "First Unknown" and the result was exactly as you described. On adding the name "First Unknown" then for *all* families the 1/2 kids were correct. This also applies, as one would expect to the "Second Unknown" Finally, I deleted the given name "First" just leaving the surname as "Unknown" for the first unknown and all families were still correct. Similarly for the "Second Unknown" I can understand why this happens and I am not certain it is a bug, but it does seem that where there are two unknown partners then both of them must specifically have a name - even both are the same eg. "Unknown". I hope this helps. Ron Ferguson _ New Tutorial: Embed a Blogger RSS feed on your webpage http://www.fergys.co.uk/ View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ ---- > From: tsjone...@verizon.net > To: LegacyUserGroup@legacyfamilytree.com > Subject: [LegacyUG] half siblings do not show in all family views > Date: Sat, 12 Sep 2009 11:57:35 -0400 > > Hello, > > Not all of the half-siblings appear in children's lists of the mother's 5 > Family Views. I have selected to "show 1/2 kids." This is a complicated > family and I hope I am clear about this. > > (I am using version 7.0.0.109, on Windows Vista.) > > The mother had three children, all different fathers. She was married twice > (no children), and had children from 3 relationships. I have the name of one > of those fathers. Originally I did not have the children assigned to correct > fathers; I had assigned them to the two husbands. > > When I found more information on their parentage, I fixed the family like > this: > > I unlinked all children. I added another husband (the known relationship), > and edited the marriage to show they were not married. Now I had 3 named > males, linked as spouses/relationships to the mother. So far so good. > > Then I added back the children, in order of birth. For the 1st and 3rd > children, I selected that child and added the mother only (link to existing > person). For the second child, I used the family view that showed his mother > and father, and added the son (link to existing person). > > When I bring up the mother's Spouse list and select either of the entries > for "unknown", one of the children - one of the 2 daughters - disappears > from the children list. > > 1. Husband1 - no
RE: [LegacyUG] half siblings do not show in all family views
I sent this some 7hrs ago and it has not appeared. If it now appears twice, please accept my apologies. Ron Ferguson Thena I do hate complicated messed up families, I have some myself, so you have my sympathies! Thank you for the table it is so much easier to see what is going on when set down like that rather than in words. Following this table I constructed the family, with, perhaps, one difference: I actually named the unknown partners "First Unknown" and "Second Unknown", mainly so that I could identify the two separate unknown fathers. I then unlinked all the marriages using the *mother* as the base person in every case. I am not saying it won't work using the father just that I didn't and it may be different. After all the unlinking you will see that the mother still has 3 (now) "unknown" partners as the kids are still linked, *Delete* (not unlink) these "marriage links". Now I reconstructed the families in *the order in which they were created* - as per your table - noting whether the families were not married and/or didn't have children as I went along. I also added the appropriate child as I went along. This resulted in families with all the 1/2 kids intact. Then I deleted the "First Unknown" and the result was exactly as you described. On adding the name "First Unknown" then for *all* families the 1/2 kids were correct. This also applies, as one would expect to the "Second Unknown" Finally, I deleted the given name "First" just leaving the surname as "Unknown" for the first unknown and all families were still correct. Similarly for the "Second Unknown" I can understand why this happens and I am not certain it is a bug, but it does seem that where there are two unknown partners then both of them must specifically have a name - even both are the same eg. "Unknown". I hope this helps. Ron Ferguson _ New Tutorial: Embed a Blogger RSS feed on your webpage http://www.fergys.co.uk/ View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ ---- > From: tsjone...@verizon.net > To: LegacyUserGroup@legacyfamilytree.com > Subject: [LegacyUG] half siblings do not show in all family views > Date: Sat, 12 Sep 2009 11:57:35 -0400 > > Hello, > > Not all of the half-siblings appear in children's lists of the mother's 5 > Family Views. I have selected to "show 1/2 kids." This is a complicated > family and I hope I am clear about this. > > (I am using version 7.0.0.109, on Windows Vista.) > > The mother had three children, all different fathers. She was married twice > (no children), and had children from 3 relationships. I have the name of one > of those fathers. Originally I did not have the children assigned to correct > fathers; I had assigned them to the two husbands. > > When I found more information on their parentage, I fixed the family like > this: > > I unlinked all children. I added another husband (the known relationship), > and edited the marriage to show they were not married. Now I had 3 named > males, linked as spouses/relationships to the mother. So far so good. > > Then I added back the children, in order of birth. For the 1st and 3rd > children, I selected that child and added the mother only (link to existing > person). For the second child, I used the family view that showed his mother > and father, and added the son (link to existing person). > > When I bring up the mother's Spouse list and select either of the entries > for "unknown", one of the children - one of the 2 daughters - disappears > from the children list. > > 1. Husband1 - no children family view shows all 3 children > 2. unknown - child 1 family view shows his child, and > child 2 > 3. Husband2 - no children family view shows all 3 children > 4. named relationship - child 2 family view shows all 3 children > 5. unknown - child 3 family view shows his child, and > child 2 > > I have gone into each "marriage" and checked "had no children" (for the > spouses) and "this couple did not marry" (for the relationships). This > didn't make any difference in which children show for the unknowns. > > I ran file maintenance - check/repair. > > If I click on one of the "disappearing" children (1 or 3) so she is in the > female box, and then view her siblings, I should see > > this person > 1/2 brother > 1/2 sister > > Instead, the 1/2 sister does not have the "1/2" before
RE: [LegacyUG] half siblings do not show in all family views
Thena, I do hate complicated messed up families, I have some myself, so you have my sympathies! Thank you for the table it is so much easier to see what is going on when set down like that rather than in words. Following this table I constructed the family, with, perhaps, one difference: I actually named the unknown partners "First Unknown" and "Second Unknown", mainly so that I could identify the two separate unknown fathers. I then unlinked all the marriages using the *mother* as the base person in every case. I am not saying it won't work using the father just that I didn't and it may be different. After all the unlinking you will see that the mother still has 3 (now) "unknown" partners as the kids are still linked, *Delete* (not unlink) these "marriage links". Now I reconstructed the families in *the order in which they were created* - as per your table - noting whether the families were not married and/or didn't have children as I went along. I also added the appropriate child as I went along. This resulted in families with all the 1/2 kids intact. Then I deleted the "First Unknown" and the result was exactly as you described. On adding the name "First Unknown" then for *all* families the 1/2 kids were correct. This also applies, as one would expect to the "Second Unknown" Finally, I deleted the given name "First" just leaving the surname as "Unknown" for the first unknown and all families were still correct. Similarly for the "Second Unknown" I can understand why this happens and I am not certain it is a bug, but it does seem that where there are two unknown partners then both of them must specifically have a name - even both are the same eg. "Unknown". I hope this helps. Ron Ferguson _ New Tutorial: Embed a Blogger RSS feed on your webpage http://www.fergys.co.uk/ View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ ---- > From: tsjone...@verizon.net > To: LegacyUserGroup@legacyfamilytree.com > Subject: [LegacyUG] half siblings do not show in all family views > Date: Sat, 12 Sep 2009 11:57:35 -0400 > > Hello, > > Not all of the half-siblings appear in children's lists of the mother's 5 > Family Views. I have selected to "show 1/2 kids." This is a complicated > family and I hope I am clear about this. > > (I am using version 7.0.0.109, on Windows Vista.) > > The mother had three children, all different fathers. She was married twice > (no children), and had children from 3 relationships. I have the name of one > of those fathers. Originally I did not have the children assigned to correct > fathers; I had assigned them to the two husbands. > > When I found more information on their parentage, I fixed the family like > this: > > I unlinked all children. I added another husband (the known relationship), > and edited the marriage to show they were not married. Now I had 3 named > males, linked as spouses/relationships to the mother. So far so good. > > Then I added back the children, in order of birth. For the 1st and 3rd > children, I selected that child and added the mother only (link to existing > person). For the second child, I used the family view that showed his mother > and father, and added the son (link to existing person). > > When I bring up the mother's Spouse list and select either of the entries > for "unknown", one of the children - one of the 2 daughters - disappears > from the children list. > > 1. Husband1 - no children family view shows all 3 children > 2. unknown - child 1 family view shows his child, and > child 2 > 3. Husband2 - no children family view shows all 3 children > 4. named relationship - child 2 family view shows all 3 children > 5. unknown - child 3 family view shows his child, and > child 2 > > I have gone into each "marriage" and checked "had no children" (for the > spouses) and "this couple did not marry" (for the relationships). This > didn't make any difference in which children show for the unknowns. > > I ran file maintenance - check/repair. > > If I click on one of the "disappearing" children (1 or 3) so she is in the > female box, and then view her siblings, I should see > > this person > 1/2 brother > 1/2 sister > > Instead, the 1/2 sister does not have the "1/2" before her name. However, if > I deselect "show half brothers and sisters" then both sibl
[LegacyUG] half siblings do not show in all family views
Hello, Not all of the half-siblings appear in children's lists of the mother's 5 Family Views. I have selected to "show 1/2 kids." This is a complicated family and I hope I am clear about this. (I am using version 7.0.0.109, on Windows Vista.) The mother had three children, all different fathers. She was married twice (no children), and had children from 3 relationships. I have the name of one of those fathers. Originally I did not have the children assigned to correct fathers; I had assigned them to the two husbands. When I found more information on their parentage, I fixed the family like this: I unlinked all children. I added another husband (the known relationship), and edited the marriage to show they were not married. Now I had 3 named males, linked as spouses/relationships to the mother. So far so good. Then I added back the children, in order of birth. For the 1st and 3rd children, I selected that child and added the mother only (link to existing person). For the second child, I used the family view that showed his mother and father, and added the son (link to existing person). When I bring up the mother's Spouse list and select either of the entries for "unknown", one of the children - one of the 2 daughters - disappears from the children list. 1. Husband1 - no children family view shows all 3 children 2. unknown - child 1family view shows his child, and child 2 3. Husband2 - no children family view shows all 3 children 4. named relationship - child 2 family view shows all 3 children 5. unknown - child 3family view shows his child, and child 2 I have gone into each "marriage" and checked "had no children" (for the spouses) and "this couple did not marry" (for the relationships). This didn't make any difference in which children show for the unknowns. I ran file maintenance - check/repair. If I click on one of the "disappearing" children (1 or 3) so she is in the female box, and then view her siblings, I should see this person 1/2 brother 1/2 sister Instead, the 1/2 sister does not have the "1/2" before her name. However, if I deselect "show half brothers and sisters" then both siblings disappear (as they should.) How can I get the missing 1/2 sibling to show when the family view includes one of the unknown relationships? --Thena Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Half siblings
Thanks Gene, Problem solved and the 1/2 sibs now display. --- On Thu, 9/3/09, Gene Hutson wrote: From: Gene Hutson Subject: Re: [LegacyUG] Half siblings To: LegacyUserGroup@legacyfamilytree.com Date: Thursday, September 3, 2009, 7:43 AM In family view, right click on the children>View>show 1/2 kids. Hope This Helps, Gene - Original Message - From: Linda Nagata To: LegacyUserGroup@legacyfamilytree.com Sent: Thursday, September 03, 2009 12:28 PM Subject: [LegacyUG] Half siblings How do I set the program so display half siblings? Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.aspLegacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Half siblings
Mahalo (as we say here in Hawaii). That did the trick. Many thanks! --- On Thu, 9/3/09, Rodney Hall wrote: From: Rodney Hall Subject: RE: [LegacyUG] Half siblings To: LegacyUserGroup@legacyfamilytree.com Date: Thursday, September 3, 2009, 7:55 AM In Family View, right click on the children’s’ screen, select View > Display half kids. -- Rodney Hall Dum spiro spero While I breathe, I hope ~~~ r...@rmhh.co.uk http://rmhh.co.uk/ http://rmhh.org.uk/ ~~~ From: k...@legacyfamilytree.com [mailto:k...@legacyfamilytree.com] On Behalf Of Linda Nagata Sent: Thursday, September 03, 2009 6:29 PM To: LegacyUserGroup@legacyfamilytree.com Subject: [LegacyUG] Half siblings How do I set the program so display half siblings? Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Half siblings
In Family View, right click on the children's' screen, select View > Display half kids. -- Rodney Hall Dum spiro spero While I breathe, I hope ~~~ r...@rmhh.co.uk http://rmhh.co.uk/ http://rmhh.org.uk/ ~~~ From: k...@legacyfamilytree.com [mailto:k...@legacyfamilytree.com] On Behalf Of Linda Nagata Sent: Thursday, September 03, 2009 6:29 PM To: LegacyUserGroup@legacyfamilytree.com Subject: [LegacyUG] Half siblings How do I set the program so display half siblings? Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Half siblings
In family view, right click on the children>View>show 1/2 kids. Hope This Helps, Gene - Original Message - From: Linda Nagata To: LegacyUserGroup@legacyfamilytree.com Sent: Thursday, September 03, 2009 12:28 PM Subject: [LegacyUG] Half siblings How do I set the program so display half siblings? Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Half siblings
How do I set the program so display half siblings? Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] half siblings
That was a real help as I did not know how to put in a 1/2 sibling. Thanks -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Karen Thornhill Sent: Monday, September 01, 2008 12:21 PM To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] half siblings Thank you, all Karen On Mon, Sep 1, 2008 at 10:05 AM, Dawn Crowley <[EMAIL PROTECTED]> wrote: > It is something that can be turned off and on, so perhaps it was an option > set long ago in v 6. I generally leave show 1/2 kids on because most of my > families with 1/2 siblings were raised together. That makes it easier for > me to catch all of the children when searching census records, etc. > However, sometimes the children were adults when a new marriage made them > 1/2 siblings. Those I don't need to see in one family when doing research. > > Karen Thornhill wrote: > >> Thank you. I know the pop up box will show half-siblings. In version >> 6 the half-siblings would show in the family view without the >> necessity >> of a right-click or pop up box or prompting. >> >> Karen >> >> On Mon, Sep 1, 2008 at 8:49 AM, Dede Holden <[EMAIL PROTECTED]> wrote: >> >>> >>> If you right click in one of the children's boxes, from Family View, >>> you'll get a pop-up menu. Choose View, then Show 1/2 Kids. >>> >>> Dede >>> >>> On Mon, Sep 1, 2008 at 8:28 AM, Karen Thornhill <[EMAIL PROTECTED]> >>> wrote: >>> >>>> >>>> Hello all, >>>> >>>> Does anyone know how to make the half siblings show in the "Family" >>>> view in Legacy 7? In Legacy 6 half-siblings showed in the "Family" >>>> view if you checked the designated box in the children section. >>>> >>>> In Legacy 7, when you click on the red plus sign to show brothers and >>>> sisters, the box is there to show half-siblings, but they only show in >>>> the box you are viewing, not in the "Family" view. >>>> >>>> What am I not doing? Thanks for your time. >>>> >>>> Karen Thornhill >>>> researching >>>> ELDRED TEICHMANN SEELEY REED SISCOE THORNHILL FOSTER UNDERWOOD >>>> PFALTZGRAFF >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>>> >>> >>> Legacy User Group guidelines: >>> http://www.LegacyFamilyTree.com/Etiquette.asp >>> Archived messages: >>> http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ >>> Online technical support: http://www.LegacyFamilyTree.com/Help.asp >>> To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp >>> >>> >>> >>> >>> >> >> >> >> Legacy User Group guidelines: >> http://www.LegacyFamilyTree.com/Etiquette.asp >> Archived messages: >> http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ >> Online technical support: http://www.LegacyFamilyTree.com/Help.asp >> To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp >> >> >> >> > > > > Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp > Archived messages: > http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ > Online technical support: http://www.LegacyFamilyTree.com/Help.asp > To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp > > > > No virus found in this outgoing message. > Checked by AVG - http://www.avg.com > Version: 8.0.169 / Virus Database: 270.6.13/1641 - Release Date: 8/29/2008 > 7:07 AM > > > > > > Legacy User Group guidelines: > > http://www.LegacyFamilyTree.com/Etiquette.asp > > Archived messages: > > http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ > > Online technical support: http://www.LegacyFamilyTree.com/Help.asp > > To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp > > > > Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp __ Information from ESET NOD32 Antivirus, version of virus signature database 3408 (20080902) __ The message was checked by ESET NOD32 Antivirus. http://www.eset.com __ Information from ESET NOD32 Antivirus, version of virus signature database 3408 (20080902) __ The message was checked by ESET NOD32 Antivirus. http://www.eset.com Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] half siblings
Thank you, all Karen On Mon, Sep 1, 2008 at 10:05 AM, Dawn Crowley <[EMAIL PROTECTED]> wrote: > It is something that can be turned off and on, so perhaps it was an option > set long ago in v 6. I generally leave show 1/2 kids on because most of my > families with 1/2 siblings were raised together. That makes it easier for > me to catch all of the children when searching census records, etc. > However, sometimes the children were adults when a new marriage made them > 1/2 siblings. Those I don't need to see in one family when doing research. > > Karen Thornhill wrote: > >> Thank you. I know the pop up box will show half-siblings. In version >> 6 the half-siblings would show in the family view without the >> necessity >> of a right-click or pop up box or prompting. >> >> Karen >> >> On Mon, Sep 1, 2008 at 8:49 AM, Dede Holden <[EMAIL PROTECTED]> wrote: >> >>> >>> If you right click in one of the children's boxes, from Family View, >>> you'll get a pop-up menu. Choose View, then Show 1/2 Kids. >>> >>> Dede >>> >>> On Mon, Sep 1, 2008 at 8:28 AM, Karen Thornhill <[EMAIL PROTECTED]> >>> wrote: >>> Hello all, Does anyone know how to make the half siblings show in the "Family" view in Legacy 7? In Legacy 6 half-siblings showed in the "Family" view if you checked the designated box in the children section. In Legacy 7, when you click on the red plus sign to show brothers and sisters, the box is there to show half-siblings, but they only show in the box you are viewing, not in the "Family" view. What am I not doing? Thanks for your time. Karen Thornhill researching ELDRED TEICHMANN SEELEY REED SISCOE THORNHILL FOSTER UNDERWOOD PFALTZGRAFF >>> >>> Legacy User Group guidelines: >>> http://www.LegacyFamilyTree.com/Etiquette.asp >>> Archived messages: >>> http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ >>> Online technical support: http://www.LegacyFamilyTree.com/Help.asp >>> To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp >>> >>> >>> >>> >>> >> >> >> >> Legacy User Group guidelines: >> http://www.LegacyFamilyTree.com/Etiquette.asp >> Archived messages: >> http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ >> Online technical support: http://www.LegacyFamilyTree.com/Help.asp >> To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp >> >> >> >> > > > > Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp > Archived messages: > http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ > Online technical support: http://www.LegacyFamilyTree.com/Help.asp > To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp > > > > No virus found in this outgoing message. > Checked by AVG - http://www.avg.com > Version: 8.0.169 / Virus Database: 270.6.13/1641 - Release Date: 8/29/2008 > 7:07 AM > > > > > > Legacy User Group guidelines: > > http://www.LegacyFamilyTree.com/Etiquette.asp > > Archived messages: > > http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ > > Online technical support: http://www.LegacyFamilyTree.com/Help.asp > > To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp > > > > Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] half siblings
It is something that can be turned off and on, so perhaps it was an option set long ago in v 6. I generally leave show 1/2 kids on because most of my families with 1/2 siblings were raised together. That makes it easier for me to catch all of the children when searching census records, etc. However, sometimes the children were adults when a new marriage made them 1/2 siblings. Those I don't need to see in one family when doing research. Karen Thornhill wrote: Thank you. I know the pop up box will show half-siblings. In version 6 the half-siblings would show in the family view without the necessity of a right-click or pop up box or prompting. Karen On Mon, Sep 1, 2008 at 8:49 AM, Dede Holden <[EMAIL PROTECTED]> wrote: If you right click in one of the children's boxes, from Family View, you'll get a pop-up menu. Choose View, then Show 1/2 Kids. Dede On Mon, Sep 1, 2008 at 8:28 AM, Karen Thornhill <[EMAIL PROTECTED]> wrote: Hello all, Does anyone know how to make the half siblings show in the "Family" view in Legacy 7? In Legacy 6 half-siblings showed in the "Family" view if you checked the designated box in the children section. In Legacy 7, when you click on the red plus sign to show brothers and sisters, the box is there to show half-siblings, but they only show in the box you are viewing, not in the "Family" view. What am I not doing? Thanks for your time. Karen Thornhill researching ELDRED TEICHMANN SEELEY REED SISCOE THORNHILL FOSTER UNDERWOOD PFALTZGRAFF Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp No virus found in this outgoing message. Checked by AVG - http://www.avg.com Version: 8.0.169 / Virus Database: 270.6.13/1641 - Release Date: 8/29/2008 7:07 AM Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] half siblings
You are absolutely wrong. V7 is for showing half-siblings exactly the same as V6. Bert - Original Message - From: "Karen Thornhill" <[EMAIL PROTECTED]> To: Sent: Monday, September 01, 2008 4:19 PM Subject: Re: [LegacyUG] half siblings Thank you. I know the pop up box will show half-siblings. In version 6 the half-siblings would show in the family view without the necessity of a right-click or pop up box or prompting. Karen On Mon, Sep 1, 2008 at 8:49 AM, Dede Holden <[EMAIL PROTECTED]> wrote: If you right click in one of the children's boxes, from Family View, you'll get a pop-up menu. Choose View, then Show 1/2 Kids. Dede On Mon, Sep 1, 2008 at 8:28 AM, Karen Thornhill <[EMAIL PROTECTED]> wrote: Hello all, Does anyone know how to make the half siblings show in the "Family" view in Legacy 7? In Legacy 6 half-siblings showed in the "Family" view if you checked the designated box in the children section. In Legacy 7, when you click on the red plus sign to show brothers and sisters, the box is there to show half-siblings, but they only show in the box you are viewing, not in the "Family" view. What am I not doing? Thanks for your time. Karen Thornhill researching ELDRED TEICHMANN SEELEY REED SISCOE THORNHILL FOSTER UNDERWOOD PFALTZGRAFF Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] half siblings
Thank you. I know the pop up box will show half-siblings. In version 6 the half-siblings would show in the family view without the necessity of a right-click or pop up box or prompting. Karen On Mon, Sep 1, 2008 at 8:49 AM, Dede Holden <[EMAIL PROTECTED]> wrote: > If you right click in one of the children's boxes, from Family View, > you'll get a pop-up menu. Choose View, then Show 1/2 Kids. > > Dede > > On Mon, Sep 1, 2008 at 8:28 AM, Karen Thornhill <[EMAIL PROTECTED]> wrote: >> >> Hello all, >> >> Does anyone know how to make the half siblings show in the "Family" >> view in Legacy 7? In Legacy 6 half-siblings showed in the "Family" >> view if you checked the designated box in the children section. >> >> In Legacy 7, when you click on the red plus sign to show brothers and >> sisters, the box is there to show half-siblings, but they only show in >> the box you are viewing, not in the "Family" view. >> >> What am I not doing? Thanks for your time. >> >> Karen Thornhill >> researching >> ELDRED TEICHMANN SEELEY REED SISCOE THORNHILL FOSTER UNDERWOOD PFALTZGRAFF >> >> >> >> >> >> >> > > > > Legacy User Group guidelines: > http://www.LegacyFamilyTree.com/Etiquette.asp > Archived messages: > http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ > Online technical support: http://www.LegacyFamilyTree.com/Help.asp > To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp > > > > Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] half siblings
If you right click in one of the children's boxes, from Family View, you'll get a pop-up menu. Choose View, then Show 1/2 Kids. Dede On Mon, Sep 1, 2008 at 8:28 AM, Karen Thornhill <[EMAIL PROTECTED]> wrote: > > Hello all, > > Does anyone know how to make the half siblings show in the "Family" > view in Legacy 7? In Legacy 6 half-siblings showed in the "Family" > view if you checked the designated box in the children section. > > In Legacy 7, when you click on the red plus sign to show brothers and > sisters, the box is there to show half-siblings, but they only show in > the box you are viewing, not in the "Family" view. > > What am I not doing? Thanks for your time. > > Karen Thornhill > researching > ELDRED TEICHMANN SEELEY REED SISCOE THORNHILL FOSTER UNDERWOOD PFALTZGRAFF > > > > > > > Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] half siblings
Right Click on a child in Family View > Select View > Select Show 1/2 Kids Evert > Date: Mon, 1 Sep 2008 08:28:44 -0500> From: [EMAIL PROTECTED]> To: > LegacyUserGroup@legacyfamilytree.com> Subject: [LegacyUG] half siblings> > > Hello all,> > Does anyone know how to make the half siblings show in the > "Family"> view in Legacy 7? In Legacy 6 half-siblings showed in the "Family"> > view if you checked the designated box in the children section.> > In Legacy > 7, when you click on the red plus sign to show brothers and> sisters, the box > is there to show half-siblings, but they only show in> the box you are > viewing, not in the "Family" view.> > What am I not doing? Thanks for your > time.> > Karen Thornhill> researching> ELDRED TEICHMANN SEELEY REED SISCOE > THORNHILL FOSTER UNDERWOOD PFALTZGRAFF> > > > Legacy User Group guidelines: > > http://www.LegacyFamilyTree.com/Etiquette.asp> Archived messages: > > http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/> Online > technical support: http://www.LegacyFamilyTree.com/Help.asp> To unsubscribe: > http://www.LegacyFamilyTree.com/LegacyLists.asp> > > _ De leukste online filmpjes vind je op MSN Video! http://video.msn.com/video.aspx?mkt=nl-nl Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] half siblings
Karen, It has always been necessary to right click on the Kids then View>Show 1/2Kids Ron Ferguson _ *New* Insert Pictures Into your Web Pages - Blogs http://www.fergys.co.uk View the Grimshaw Family Tree at: http://www.fergys.co.uk/Grimshaw/ For The Fergusons of N.W. England See: http://myweb.tiscali.co.uk/fergys/ _ > Date: Mon, 1 Sep 2008 08:28:44 -0500 > From: [EMAIL PROTECTED] > To: LegacyUserGroup@legacyfamilytree.com > Subject: [LegacyUG] half siblings > > Hello all, > > Does anyone know how to make the half siblings show in the "Family" > view in Legacy 7? In Legacy 6 half-siblings showed in the "Family" > view if you checked the designated box in the children section. > > In Legacy 7, when you click on the red plus sign to show brothers and > sisters, the box is there to show half-siblings, but they only show in > the box you are viewing, not in the "Family" view. > > What am I not doing? Thanks for your time. > > Karen Thornhill > researching > ELDRED TEICHMANN SEELEY REED SISCOE THORNHILL FOSTER UNDERWOOD PFALTZGRAFF > > _ Make a mini you and download it into Windows Live Messenger http://clk.atdmt.com/UKM/go/111354029/direct/01/ Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] half siblings
Hello all, Does anyone know how to make the half siblings show in the "Family" view in Legacy 7? In Legacy 6 half-siblings showed in the "Family" view if you checked the designated box in the children section. In Legacy 7, when you click on the red plus sign to show brothers and sisters, the box is there to show half-siblings, but they only show in the box you are viewing, not in the "Family" view. What am I not doing? Thanks for your time. Karen Thornhill researching ELDRED TEICHMANN SEELEY REED SISCOE THORNHILL FOSTER UNDERWOOD PFALTZGRAFF Legacy User Group guidelines: http://www.LegacyFamilyTree.com/Etiquette.asp Archived messages: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ Online technical support: http://www.LegacyFamilyTree.com/Help.asp To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Half siblings not showing - Legacy 5/Windows Vista
Ron, Only until you get Vista and/or Office 2007 They're so dramatically different from previous versions. The fun is trying to learn both at the same time Thanks for using Legacy. Sherry Customer Support Millennia Corporation [EMAIL PROTECTED] http://www.LegacyFamilyTree.com We are changing the world of genealogy! When replying to this message, please include all previous correspondence. Thanks. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of ronald ferguson Sent: Tuesday, May 15, 2007 4:10 PM To: LegacyUserGroup@legacyfamilytree.com Subject: RE: [LegacyUG] Half siblings not showing - Legacy 5/Windows Vista And I thought that I'd got rid of "steep learning curves" 50 years ago :-) Ron Ferguson >From: "Sherry/Support" <[EMAIL PROTECTED]> >Reply-To: LegacyUserGroup@legacyfamilytree.com >To: >Subject: RE: [LegacyUG] Half siblings not showing - Legacy 5/Windows Vista >Date: Tue, 15 May 2007 15:50:44 -0700 > > >There's a *steep* learning curve with Vista. Lots of changes and >challenges. > > >Thanks for using Legacy. > >Sherry >Customer Support >Millennia Corporation >[EMAIL PROTECTED] >http://www.LegacyFamilyTree.com > >We are changing the world of genealogy! > >When replying to this message, please include all previous correspondence. >Thanks. > Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Half siblings not showing - Legacy 5/Windows Vista
And I thought that I'd got rid of "steep learning curves" 50 years ago :-) Ron Ferguson _ For Genealogy, Software and Social visit: http://myweb.tiscali.co.uk/fergys/ *New Blog* Create Legacy Web Pages *Opening 31 May My New Site: http://www.fergys.co.uk * __ From: "Sherry/Support" <[EMAIL PROTECTED]> Reply-To: LegacyUserGroup@legacyfamilytree.com To: Subject: RE: [LegacyUG] Half siblings not showing - Legacy 5/Windows Vista Date: Tue, 15 May 2007 15:50:44 -0700 Wayne, If you download and install the latest build of Legacy v6, you shouldn't have any problems with running Legacy under Vista. Do be sure to install to the default c:\Legacy folder as Vista has a quirk of not liking programs to write to the program folder under Program Files unless you're running as administrator. There's a *steep* learning curve with Vista. Lots of changes and challenges. Thanks for using Legacy. Sherry Customer Support Millennia Corporation [EMAIL PROTECTED] http://www.LegacyFamilyTree.com We are changing the world of genealogy! When replying to this message, please include all previous correspondence. Thanks. Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wayne Martell Sent: Tuesday, May 15, 2007 3:01 PM To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] Half siblings not showing - Legacy 5/Windows Vista Are people with the latest versions of Legacy 6 having any issues with Vista? I have a new Vista computer on order and pre-warned is pre-armed. Wayne Martell Victoria, BC, Canada _ Could you be the guest MSN Movies presenter? Click Here to Audition http://www.lightscameraaudition.co.uk Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Half siblings not showing - Legacy 5/Windows Vista
Wayne, If you download and install the latest build of Legacy v6, you shouldn't have any problems with running Legacy under Vista. Do be sure to install to the default c:\Legacy folder as Vista has a quirk of not liking programs to write to the program folder under Program Files unless you're running as administrator. There's a *steep* learning curve with Vista. Lots of changes and challenges. Thanks for using Legacy. Sherry Customer Support Millennia Corporation [EMAIL PROTECTED] http://www.LegacyFamilyTree.com We are changing the world of genealogy! When replying to this message, please include all previous correspondence. Thanks. Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wayne Martell Sent: Tuesday, May 15, 2007 3:01 PM To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] Half siblings not showing - Legacy 5/Windows Vista Are people with the latest versions of Legacy 6 having any issues with Vista? I have a new Vista computer on order and pre-warned is pre-armed. Wayne Martell Victoria, BC, Canada Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Half siblings not showing - Legacy 5/Windows Vista
Are people with the latest versions of Legacy 6 having any issues with Vista? I have a new Vista computer on order and pre-warned is pre-armed. Wayne Martell Victoria, BC, Canada - Original Message - From: Sherry/Support To: LegacyUserGroup@legacyfamilytree.com Sent: Tuesday, May 15, 2007 1:28 PM Subject: RE: [LegacyUG] Half siblings not showing - Legacy 5/Windows Vista Lesley, Right click on one of the children in the Children's List and select View > 1/2 kids. Build 6.0.0.127 fixed the three problems Legacy has with Vista. We won't be doing any updates for Legacy v5 to run properly under Vista. Here are some workarounds: 1. The help files won't work unless you go to the Microsoft website and download the WinHlp32.exe file. Go to http://support.microsoft.com/kb/917607/en-us where you'll find information about this problem and links to download the WinHlp32.exe file. There are two options to download: Windows6.0-KB917607-x64.msu For 64-bit Vista Windows6.0-KB917607-x86.msu For 32-bit Vista 2. You won't be able to update the Deluxe edition from within Legacy. You can find out if there's an update available, but you'll have to go to our website at http://www.legacyfamilytree.com/helpDownloadVersion5.asp to download new updates. However, they're very rare with Legacy v5. You'll get an update only if the database schema changes and we need to make the Family Files in v5 compatible with the Family Files in v6 again. 3. You'll need to do one of two things: A. If you have multiple users of Legacy on your computer, when you switch users, you will need to go to Options > Customize > Locations and click on the "Reset" button by "Location of Temporary Files" OR B. With Windows Explorer, go to the Legacy folder on your hard drive and create a new Temp sub-folder. Right click on the Legacy folder, select New > Folder and then name the new folder "Temp". Then go to Options > Customize > Locations and set the path to c:\Legacy\Temp. This will create a new folder that won't require resetting every time you change users. Make sure that you install Legacy to the default c:\Legacy folder and not into the Programs folder. There may be other problems we haven't run into yet. Thanks for using Legacy. Sherry Customer Support Millennia Corporation [EMAIL PROTECTED] http://www.LegacyFamilyTree.com We are changing the world of genealogy! When replying to this message, please include all previous correspondence. Thanks. Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, May 15, 2007 12:01 PM To: LegacyUserGroup@legacyfamilytree.com Subject: [LegacyUG] Half siblings not showing - Legacy 5/Windows Vista Hello, No matter what I do I cannot get my program to show half siblings as before (eg. William has two children by his first marriage and 4 by his second marriage and I would like to see all the children on my screen at the same time). I was able to do this in my old computer but I now have Windows Vista and am using the Deluxe version of Legacy 5. Because I am using Windows Vista the help file does not work anymore. Any help would be appreciated. Lesley Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Half siblings not showing - Legacy 5/Windows Vista
Thanks a bunch Lesley, I too was having problems showing the 1/2 (mixed breed) kids. Winston -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, May 15, 2007 3:36 PM To: LegacyUserGroup@legacyfamilytree.com Subject: Re: [LegacyUG] Half siblings not showing - Legacy 5/Windows Vista Thank you Sherry for your reply - I will follow your suggestions. There have been a few issues that have arisen using Windows Vista. Lesley - Original Message - From: "Sherry/Support" <[EMAIL PROTECTED]> To: Sent: Tuesday, May 15, 2007 1:28 PM Subject: RE: [LegacyUG] Half siblings not showing - Legacy 5/Windows Vista Lesley, Right click on one of the children in the Children's List and select View > 1/2 kids. Build 6.0.0.127 fixed the three problems Legacy has with Vista. We won't be doing any updates for Legacy v5 to run properly under Vista. Here are some workarounds: 1. The help files won't work unless you go to the Microsoft website and download the WinHlp32.exe file. Go to http://support.microsoft.com/kb/917607/en-us where you'll find information about this problem and links to download the WinHlp32.exe file. There are two options to download: Windows6.0-KB917607-x64.msu For 64-bit Vista Windows6.0-KB917607-x86.msu For 32-bit Vista 2. You won't be able to update the Deluxe edition from within Legacy. You can find out if there's an update available, but you'll have to go to our website at http://www.legacyfamilytree.com/helpDownloadVersion5.asp to download new updates. However, they're very rare with Legacy v5. You'll get an update only if the database schema changes and we need to make the Family Files in v5 compatible with the Family Files in v6 again. 3. You'll need to do one of two things: A. If you have multiple users of Legacy on your computer, when you switch users, you will need to go to Options > Customize > Locations and click on the "Reset" button by "Location of Temporary Files" OR B. With Windows Explorer, go to the Legacy folder on your hard drive and create a new Temp sub-folder. Right click on the Legacy folder, select New > Folder and then name the new folder "Temp". Then go to Options > Customize > Locations and set the path to c:\Legacy\Temp. This will create a new folder that won't require resetting every time you change users. Make sure that you install Legacy to the default c:\Legacy folder and not into the Programs folder. There may be other problems we haven't run into yet. Thanks for using Legacy. Sherry Customer Support Millennia Corporation [EMAIL PROTECTED] http://www.LegacyFamilyTree.com Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Half siblings not showing - Legacy 5/Windows Vista
Thank you Sherry for your reply - I will follow your suggestions. There have been a few issues that have arisen using Windows Vista. Lesley - Original Message - From: "Sherry/Support" <[EMAIL PROTECTED]> To: Sent: Tuesday, May 15, 2007 1:28 PM Subject: RE: [LegacyUG] Half siblings not showing - Legacy 5/Windows Vista Lesley, Right click on one of the children in the Children's List and select View > 1/2 kids. Build 6.0.0.127 fixed the three problems Legacy has with Vista. We won't be doing any updates for Legacy v5 to run properly under Vista. Here are some workarounds: 1. The help files won't work unless you go to the Microsoft website and download the WinHlp32.exe file. Go to http://support.microsoft.com/kb/917607/en-us where you'll find information about this problem and links to download the WinHlp32.exe file. There are two options to download: Windows6.0-KB917607-x64.msu For 64-bit Vista Windows6.0-KB917607-x86.msu For 32-bit Vista 2. You won't be able to update the Deluxe edition from within Legacy. You can find out if there's an update available, but you'll have to go to our website at http://www.legacyfamilytree.com/helpDownloadVersion5.asp to download new updates. However, they're very rare with Legacy v5. You'll get an update only if the database schema changes and we need to make the Family Files in v5 compatible with the Family Files in v6 again. 3. You'll need to do one of two things: A. If you have multiple users of Legacy on your computer, when you switch users, you will need to go to Options > Customize > Locations and click on the "Reset" button by "Location of Temporary Files" OR B. With Windows Explorer, go to the Legacy folder on your hard drive and create a new Temp sub-folder. Right click on the Legacy folder, select New > Folder and then name the new folder "Temp". Then go to Options Customize > Locations and set the path to c:\Legacy\Temp. This will create a new folder that won't require resetting every time you change users. Make sure that you install Legacy to the default c:\Legacy folder and not into the Programs folder. There may be other problems we haven't run into yet. Thanks for using Legacy. Sherry Customer Support Millennia Corporation [EMAIL PROTECTED] http://www.LegacyFamilyTree.com Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Half siblings not showing - Legacy 5/Windows Vista
Lesley, Right click on one of the children in the Children's List and select View > 1/2 kids. Build 6.0.0.127 fixed the three problems Legacy has with Vista. We won't be doing any updates for Legacy v5 to run properly under Vista. Here are some workarounds: 1. The help files won't work unless you go to the Microsoft website and download the WinHlp32.exe file. Go to http://support.microsoft.com/kb/917607/en-us where you'll find information about this problem and links to download the WinHlp32.exe file. There are two options to download: Windows6.0-KB917607-x64.msu For 64-bit Vista Windows6.0-KB917607-x86.msu For 32-bit Vista 2. You won't be able to update the Deluxe edition from within Legacy. You can find out if there's an update available, but you'll have to go to our website at http://www.legacyfamilytree.com/helpDownloadVersion5.asp to download new updates. However, they're very rare with Legacy v5. You'll get an update only if the database schema changes and we need to make the Family Files in v5 compatible with the Family Files in v6 again. 3. You'll need to do one of two things: A. If you have multiple users of Legacy on your computer, when you switch users, you will need to go to Options > Customize > Locations and click on the "Reset" button by "Location of Temporary Files" OR B. With Windows Explorer, go to the Legacy folder on your hard drive and create a new Temp sub-folder. Right click on the Legacy folder, select New > Folder and then name the new folder "Temp". Then go to Options > Customize > Locations and set the path to c:\Legacy\Temp. This will create a new folder that won't require resetting every time you change users. Make sure that you install Legacy to the default c:\Legacy folder and not into the Programs folder. There may be other problems we haven't run into yet. Thanks for using Legacy. Sherry Customer Support Millennia Corporation [EMAIL PROTECTED] http://www.LegacyFamilyTree.com We are changing the world of genealogy! When replying to this message, please include all previous correspondence. Thanks. Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, May 15, 2007 12:01 PM To: LegacyUserGroup@legacyfamilytree.com Subject: [LegacyUG] Half siblings not showing - Legacy 5/Windows Vista Hello, No matter what I do I cannot get my program to show half siblings as before (eg. William has two children by his first marriage and 4 by his second marriage and I would like to see all the children on my screen at the same time). I was able to do this in my old computer but I now have Windows Vista and am using the Deluxe version of Legacy 5. Because I am using Windows Vista the help file does not work anymore. Any help would be appreciated. Lesley Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
Re: [LegacyUG] Half siblings not showing - Legacy 5/Windows Vista
Hello Ron, I tried this so many times and now that I have tried it again from your directions it works! Must be some sort of Murphy's Law!!! Wish all my problems were solved this easily! Thank you for your help. Lesley - Original Message - From: "ronald ferguson" <[EMAIL PROTECTED]> To: Sent: Tuesday, May 15, 2007 12:38 PM Subject: RE: [LegacyUG] Half siblings not showing - Legacy 5/Windows Vista Lesley, You do not say how you are trying to do it. The standard method is to right click on the kids then on the pop-up go to View>Show 1/2 Kids. Is that what you are using? Ron Ferguson _ For Genealogy, Software and Social visit: http://myweb.tiscali.co.uk/fergys/ *New Blog* Create Legacy Web Pages *Opening 31 May My New Site: http://www.fergys.co.uk * __ From: [EMAIL PROTECTED] Reply-To: LegacyUserGroup@legacyfamilytree.com To: LegacyUserGroup@legacyfamilytree.com Subject: [LegacyUG] Half siblings not showing - Legacy 5/Windows Vista Date: Tue, 15 May 2007 12:01:16 -0700 Hello, No matter what I do I cannot get my program to show half siblings as before (eg. William has two children by his first marriage and 4 by his second marriage and I would like to see all the children on my screen at the same time). I was able to do this in my old computer but I now have Windows Vista and am using the Deluxe version of Legacy 5. Because I am using Windows Vista the help file does not work anymore. Any help would be appreciated. Lesley _ The next generation of Hotmail is here! http://www.newhotmail.co.uk/ Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
RE: [LegacyUG] Half siblings not showing - Legacy 5/Windows Vista
Lesley, You do not say how you are trying to do it. The standard method is to right click on the kids then on the pop-up go to View>Show 1/2 Kids. Is that what you are using? Ron Ferguson _ For Genealogy, Software and Social visit: http://myweb.tiscali.co.uk/fergys/ *New Blog* Create Legacy Web Pages *Opening 31 May My New Site: http://www.fergys.co.uk * __ From: [EMAIL PROTECTED] Reply-To: LegacyUserGroup@legacyfamilytree.com To: LegacyUserGroup@legacyfamilytree.com Subject: [LegacyUG] Half siblings not showing - Legacy 5/Windows Vista Date: Tue, 15 May 2007 12:01:16 -0700 Hello, No matter what I do I cannot get my program to show half siblings as before (eg. William has two children by his first marriage and 4 by his second marriage and I would like to see all the children on my screen at the same time). I was able to do this in my old computer but I now have Windows Vista and am using the Deluxe version of Legacy 5. Because I am using Windows Vista the help file does not work anymore. Any help would be appreciated. Lesley _ The next generation of Hotmail is here! http://www.newhotmail.co.uk/ Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
[LegacyUG] Half siblings not showing - Legacy 5/Windows Vista
Hello, No matter what I do I cannot get my program to show half siblings as before (eg. William has two children by his first marriage and 4 by his second marriage and I would like to see all the children on my screen at the same time). I was able to do this in my old computer but I now have Windows Vista and am using the Deluxe version of Legacy 5. Because I am using Windows Vista the help file does not work anymore. Any help would be appreciated. Lesley Have you unlocked the real power of Legacy? Legacy 6.0 Deluxe has 92 features not found in the Standard Edition. Learn more about these features at http://legacyfamilytree.com/DeluxeEdition.asp. Legacy User Group guidelines can be found at: http://www.LegacyFamilyTree.com/Etiquette.asp To find past messages, please go to our searchable archives at: http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ For online technical support, please visit http://www.LegacyFamilyTree.com/Help.asp To unsubscribe please visit: http://www.LegacyFamilyTree.com/LegacyLists.asp
