Re: [LegacyUG] Locked out of Legacy

2017-07-19 Thread Cathy Pinner 

Bill,
If you restore a backup file, do run a check/repair on it straight away.
A Legacy backup zip preserves your database as it is.

You only lose SourceWriter sources if you use a Gedcom. Gedcom is not 
the way to backup your Legacy file as a normal rule.


Error 3021 has been around from time to time since I began using Legacy 
in 1998. It has various causes and a check/repair normally fixes it but 
not always.
These "individual not found" errors are relatively new. Some relate to 
hinting.

It could be a good idea to turn hinting off when doing merges.

If you keep getting errors, contact Support.

Cathy


Billy Mittelstadt Jr 
Thursday, 20 July 2017 12:06 AM
Did a manual merge of individual, and got message can't find 
individual ID 44475 (this was not the record numbers of either ID). 
And then Error Checking for shared events. Error 3021: No current 
record. When hitting user prompt "YES" for try again get endless loop. 
When hitting "NO" prompt, back to individual ID 44475 not found and 
message Run-time-error 440: No current record. How do I get Legacy back?
If I do have to revert back to backup file, is there a way to restore 
sources to SourceWriter format?


Thanks for your help.
Bill



--

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Locked out of Legacy

2017-07-19 Thread Dennis Murphy 
There must be some sort of glitch in Legacy 9 as I have gotten the Error
3021 on several occasions while doing different tasks. Hopefully the
programmers will look into and fix the problem in the next update.

On Wed, Jul 19, 2017 at 12:06 PM, Billy Mittelstadt Jr <
bmittelstad...@gmail.com> wrote:

> Did a manual merge of individual, and got message can't find individual ID
> 44475 (this was not the record numbers of either ID). And then Error
> Checking for shared events. Error 3021: No current record. When hitting
> user prompt "YES" for try again get endless loop. When hitting "NO" prompt,
> back to individual ID 44475 not found and message Run-time-error 440: No
> current record. How do I get Legacy back?
> If I do have to revert back to backup file, is there a way to restore
> sources to SourceWriter format?
>
> Thanks for your help.
> Bill
> --
>
> LegacyUserGroup mailing list
> LegacyUserGroup@legacyusers.com
> To manage your subscription and unsubscribe http://legacyusers.com/
> mailman/listinfo/legacyusergroup_legacyusers.com
> Archives at:
> http://www.mail-archive.com/legacyusergroup@legacyusers.com/
>
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Locked out of Legacy

2017-07-19 Thread bobsgenealogy 
Bill
I had the same problem many years ago.  Legacy help had me send the file(s) 
into them - they fixed it for me.
bob
> On 19Jul, 2017, at 3:26 PM, Bill Mittelstadt  wrote:
> 
> Carrie I don't have access, but do have have excel.  is there a way to open 
> in excel?
> 


-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Query help

2017-07-19 Thread Donald Quigley 
Carrie – Agree 100%.  I usually work with copies of my Legacy fdb file until I 
know everything is working correctly.

 

Donald Quigley

Escondido, CA

  Quigley Doyle Family Tree

 

 

 

From: LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] On 
Behalf Of Carrie Pillow
Sent: Wednesday, July 19, 2017 11:11 AM
To: Legacy User Group 
Subject: Re: [LegacyUG] Query help

 

Do a backup before working on your data in Access, it can be useful, but if you 
are not careful , you can corrupt your file

 

Regards

 

Carrie

 

From: LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] On 
Behalf Of Scott Hall
Sent: 19 July 2017 17:27
To: Legacy User Group  >
Subject: Re: [LegacyUG] Query help

 

Donald:

Thanks.  I just loaded Access on my computer as it seems improving my Access 
skills is going to be the best way to handle the various things I want to do 
with my database.  At 102,000 individuals and growing, there's often a lot of 
this type of query and consideration I'd like to do.  If OK with you, I may ask 
some query questions from time-to-time.

Scott

 

On Tue, Jul 18, 2017 at 8:44 PM, Donald Quigley  > wrote:

Scott,

 

I don’t believe that you can include an address in a search string.  But you 
can find and tag all individuals with no Burial Place and then scroll through 
the Search Results list looking for the blue button adjacent to the “Buried  
in” field on the Edit page.  If its shaded out, there is no address for the 
Buried Place.  Tag such persons and you will have created the list you want – 
with one caveat:  If the blue button is highlited, there is likely to be a 
burial address – but it could be just an indication of a Burial 
Note/Picture/Cremated (not likely, but possible).  Klunky, but it might work 
for you.

 

The only sure way I can think of is to go into MS Access and write a suitable 
query.  Easy to say, but not if you don’t know Access.

 

Donald Quigley

Escondido, CA

  Quigley Doyle Family Tree

 

 

 

From: LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com 
 ] On Behalf Of Scott Hall
Sent: Tuesday, July 18, 2017 3:04 PM
To: LegacyUserGroup@legacyusers.com  
Subject: [LegacyUG] Query help

 

I want to build a search query to identify all users with data in the burial 
place field but no attached burial address.  Can anyone assist?  I cannot 
figure out how to get attached addresses into the search string.

Thanks,

Scott


--

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com  
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

 

-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Query help

2017-07-19 Thread Donald Quigley 
No worries, I’ll try to help.

 

Donald Quigley

Escondido, CA

  Quigley Doyle Family Tree

 

 

 

From: LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] On 
Behalf Of Scott Hall
Sent: Wednesday, July 19, 2017 9:27 AM
To: Legacy User Group 
Subject: Re: [LegacyUG] Query help

 

Donald:

Thanks.  I just loaded Access on my computer as it seems improving my Access 
skills is going to be the best way to handle the various things I want to do 
with my database.  At 102,000 individuals and growing, there's often a lot of 
this type of query and consideration I'd like to do.  If OK with you, I may ask 
some query questions from time-to-time.

Scott

 

On Tue, Jul 18, 2017 at 8:44 PM, Donald Quigley  > wrote:

Scott,

 

I don’t believe that you can include an address in a search string.  But you 
can find and tag all individuals with no Burial Place and then scroll through 
the Search Results list looking for the blue button adjacent to the “Buried  
in” field on the Edit page.  If its shaded out, there is no address for the 
Buried Place.  Tag such persons and you will have created the list you want – 
with one caveat:  If the blue button is highlited, there is likely to be a 
burial address – but it could be just an indication of a Burial 
Note/Picture/Cremated (not likely, but possible).  Klunky, but it might work 
for you.

 

The only sure way I can think of is to go into MS Access and write a suitable 
query.  Easy to say, but not if you don’t know Access.

 

Donald Quigley

Escondido, CA

  Quigley Doyle Family Tree

 

 

 

From: LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com 
 ] On Behalf Of Scott Hall
Sent: Tuesday, July 18, 2017 3:04 PM
To: LegacyUserGroup@legacyusers.com  
Subject: [LegacyUG] Query help

 

I want to build a search query to identify all users with data in the burial 
place field but no attached burial address.  Can anyone assist?  I cannot 
figure out how to get attached addresses into the search string.

Thanks,

Scott


--

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com  
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

 

-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Query help

2017-07-19 Thread Scott Hall 
Cardinal rule!

On Wed, Jul 19, 2017 at 2:11 PM, Carrie Pillow 
wrote:

> Do a backup before working on your data in Access, it can be useful, but
> if you are not careful , you can corrupt your file
>
>
>
> Regards
>
>
>
> Carrie
>
>
>
> *From:* LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] *On
> Behalf Of *Scott Hall
> *Sent:* 19 July 2017 17:27
> *To:* Legacy User Group 
> *Subject:* Re: [LegacyUG] Query help
>
>
>
> Donald:
>
> Thanks.  I just loaded Access on my computer as it seems improving my
> Access skills is going to be the best way to handle the various things I
> want to do with my database.  At 102,000 individuals and growing, there's
> often a lot of this type of query and consideration I'd like to do.  If OK
> with you, I may ask some query questions from time-to-time.
>
> Scott
>
>
>
> On Tue, Jul 18, 2017 at 8:44 PM, Donald Quigley  wrote:
>
> Scott,
>
>
>
> I don’t believe that you can include an address in a search string.  But
> you can find and tag all individuals with no Burial Place and then scroll
> through the Search Results list looking for the blue button adjacent to the
> “Buried  in” field on the Edit page.  If its shaded out, there is no
> address for the Buried Place.  Tag such persons and you will have created
> the list you want – with one caveat:  If the blue button is highlited,
> there is likely to be a burial address – but it could be just an indication
> of a Burial Note/Picture/Cremated (not likely, but possible).  Klunky, but
> it might work for you.
>
>
>
> The only sure way I can think of is to go into MS Access and write a
> suitable query.  Easy to say, but not if you don’t know Access.
>
>
>
> Donald Quigley
>
> Escondido, CA
>
> Quigley Doyle Family Tree 
>
>
>
>
>
>
>
> *From:* LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] *On
> Behalf Of *Scott Hall
> *Sent:* Tuesday, July 18, 2017 3:04 PM
> *To:* LegacyUserGroup@legacyusers.com
> *Subject:* [LegacyUG] Query help
>
>
>
> I want to build a search query to identify all users with data in the
> burial place field but no attached burial address.  Can anyone assist?  I
> cannot figure out how to get attached addresses into the search string.
>
> Thanks,
>
> Scott
>
>
> --
>
> LegacyUserGroup mailing list
> LegacyUserGroup@legacyusers.com
> To manage your subscription and unsubscribe http://legacyusers.com/
> mailman/listinfo/legacyusergroup_legacyusers.com
> Archives at:
> http://www.mail-archive.com/legacyusergroup@legacyusers.com/
>
>
>
> --
>
> LegacyUserGroup mailing list
> LegacyUserGroup@legacyusers.com
> To manage your subscription and unsubscribe http://legacyusers.com/
> mailman/listinfo/legacyusergroup_legacyusers.com
> Archives at:
> http://www.mail-archive.com/legacyusergroup@legacyusers.com/
>
>
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Locked out of Legacy

2017-07-19 Thread Bill Mittelstadt 
Carrie I don't have access, but do have have excel.  is there a way to open
in excel?

On Wed, Jul 19, 2017 at 3:03 PM, Carrie Pillow 
wrote:

> Try opening in access
>
> Carrie
>
> -Original Message-
> From: LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] On
> Behalf Of Billy Mittelstadt Jr
> Sent: 19 July 2017 19:54
> To: legacyusergroup@legacyusers.com
> Subject: Re: [LegacyUG] Locked out of Legacy
>
> Is there a way run check/repair without going thru the program? Just can't
> get to program due to error screen.
>
> On July 19, 2017, at 2:30 PM, JV Leavitt  wrote:
>
> Close Legacy, and open it again. That might be all you need to do, but if
> you still have trouble, run file maintenance.  The RIN numbers that should
> be gone after a merge in Legacy will stay active, but get removed when you
> close the program and open it again.  If this isn't in the to-do bug list,
> I think it should be.
>
> Joseph Leavitt
>
>
> On 7/19/2017 9:06 AM, Billy Mittelstadt Jr wrote:
> > Did a manual merge of individual, and got message can't find individual
> ID 44475 (this was not the record numbers of either ID). And then Error
> Checking for shared events. Error 3021: No current record. When hitting
> user prompt "YES" for try again get endless loop. When hitting "NO" prompt,
> back to individual ID 44475 not found and message Run-time-error 440: No
> current record. How do I get Legacy back?
> > If I do have to revert back to backup file, is there a way to restore
> sources to SourceWriter format?
> >
> > Thanks for your help.
> > Bill
>
>
> --
>
> LegacyUserGroup mailing list
> LegacyUserGroup@legacyusers.com
> To manage your subscription and unsubscribe http://legacyusers.com/
> mailman/listinfo/legacyusergroup_legacyusers.com
> Archives at:
> http://www.mail-archive.com/legacyusergroup@legacyusers.com/
> --
>
> LegacyUserGroup mailing list
> LegacyUserGroup@legacyusers.com
> To manage your subscription and unsubscribe http://legacyusers.com/
> mailman/listinfo/legacyusergroup_legacyusers.com
> Archives at:
> http://www.mail-archive.com/legacyusergroup@legacyusers.com/
>
> --
>
> LegacyUserGroup mailing list
> LegacyUserGroup@legacyusers.com
> To manage your subscription and unsubscribe http://legacyusers.com/
> mailman/listinfo/legacyusergroup_legacyusers.com
> Archives at:
> http://www.mail-archive.com/legacyusergroup@legacyusers.com/
>
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Locked out of Legacy

2017-07-19 Thread Carrie Pillow 
Try opening in access

Carrie

-Original Message-
From: LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] On 
Behalf Of Billy Mittelstadt Jr
Sent: 19 July 2017 19:54
To: legacyusergroup@legacyusers.com
Subject: Re: [LegacyUG] Locked out of Legacy

Is there a way run check/repair without going thru the program? Just can't get 
to program due to error screen.

On July 19, 2017, at 2:30 PM, JV Leavitt  wrote:

Close Legacy, and open it again. That might be all you need to do, but if you 
still have trouble, run file maintenance.  The RIN numbers that should be gone 
after a merge in Legacy will stay active, but get removed when you close the 
program and open it again.  If this isn't in the to-do bug list, I think it 
should be.

Joseph Leavitt


On 7/19/2017 9:06 AM, Billy Mittelstadt Jr wrote:
> Did a manual merge of individual, and got message can't find individual ID 
> 44475 (this was not the record numbers of either ID). And then Error Checking 
> for shared events. Error 3021: No current record. When hitting user prompt 
> "YES" for try again get endless loop. When hitting "NO" prompt, back to 
> individual ID 44475 not found and message Run-time-error 440: No current 
> record. How do I get Legacy back?
> If I do have to revert back to backup file, is there a way to restore sources 
> to SourceWriter format?
>
> Thanks for your help.
> Bill


-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Locked out of Legacy

2017-07-19 Thread Billy Mittelstadt Jr 
Is there a way run check/repair without going thru the program? Just can't get 
to program due to error screen.

On July 19, 2017, at 2:30 PM, JV Leavitt  wrote:

Close Legacy, and open it again. That might be all you need to do, but 
if you still have trouble, run file maintenance.  The RIN numbers that 
should be gone after a merge in Legacy will stay active, but get removed 
when you close the program and open it again.  If this isn't in the 
to-do bug list, I think it should be.

Joseph Leavitt


On 7/19/2017 9:06 AM, Billy Mittelstadt Jr wrote:
> Did a manual merge of individual, and got message can't find individual ID 
> 44475 (this was not the record numbers of either ID). And then Error Checking 
> for shared events. Error 3021: No current record. When hitting user prompt 
> "YES" for try again get endless loop. When hitting "NO" prompt, back to 
> individual ID 44475 not found and message Run-time-error 440: No current 
> record. How do I get Legacy back?
> If I do have to revert back to backup file, is there a way to restore sources 
> to SourceWriter format?
>
> Thanks for your help.
> Bill


-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Locked out of Legacy

2017-07-19 Thread Billy Mittelstadt Jr 
Did that, plus re-install program, still getting error messages. Would do 
check/repair but can't due to error screens and the program shuts down. Trying 
to do a work around, but reflexes too slow.

On July 19, 2017, at 2:30 PM, JV Leavitt  wrote:

Close Legacy, and open it again. That might be all you need to do, but 
if you still have trouble, run file maintenance.  The RIN numbers that 
should be gone after a merge in Legacy will stay active, but get removed 
when you close the program and open it again.  If this isn't in the 
to-do bug list, I think it should be.

Joseph Leavitt


On 7/19/2017 9:06 AM, Billy Mittelstadt Jr wrote:
> Did a manual merge of individual, and got message can't find individual ID 
> 44475 (this was not the record numbers of either ID). And then Error Checking 
> for shared events. Error 3021: No current record. When hitting user prompt 
> "YES" for try again get endless loop. When hitting "NO" prompt, back to 
> individual ID 44475 not found and message Run-time-error 440: No current 
> record. How do I get Legacy back?
> If I do have to revert back to backup file, is there a way to restore sources 
> to SourceWriter format?
>
> Thanks for your help.
> Bill


-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Locked out of Legacy

2017-07-19 Thread JV Leavitt 
Close Legacy, and open it again. That might be all you need to do, but 
if you still have trouble, run file maintenance.  The RIN numbers that 
should be gone after a merge in Legacy will stay active, but get removed 
when you close the program and open it again.  If this isn't in the 
to-do bug list, I think it should be.


Joseph Leavitt


On 7/19/2017 9:06 AM, Billy Mittelstadt Jr wrote:

Did a manual merge of individual, and got message can't find individual ID 44475 (this was not the 
record numbers of either ID). And then Error Checking for shared events. Error 3021: No current 
record. When hitting user prompt "YES" for try again get endless loop. When hitting 
"NO" prompt, back to individual ID 44475 not found and message Run-time-error 440: No 
current record. How do I get Legacy back?
If I do have to revert back to backup file, is there a way to restore sources 
to SourceWriter format?

Thanks for your help.
Bill



--

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Leagacy FS Access violation

2017-07-19 Thread JV Leavitt 
Thank you Cathy.  It was only a temporary problem with FamilySearch 
yesterday.


Joseph Leavitt


On 7/18/2017 9:30 PM, Cathy Pinner wrote:

Joseph,
I'm not LDS so I don't know whether there are more problems with that 
part of the Legacy FS program but it's working fine for me.


See: http://support.legacyfamilytree.com/article/AA-00530
Access violation errors have a number of different causes.

It can't be a general problem or there'd be posts in the Facebook 
group. There's only one and he found he had a heap of Check/Repair 
errors in his file.


Cathy

JV Leavitt wrote:


A new problem has shown up when using LegacyFS. I think the error
started showing up several hours ago.

The API from LegacyFS to FamilySearch must be broken again. The error
message says:
Access violation at address 0075E311 in module 'LegacyFS.exe'. Read of
address 000C.

Any word yet? or am I the first one to notice? The LFS program will
no t work at all now. I'm able to see that the problem is not at this 
end.


Joseph Leavitt





--

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Query help

2017-07-19 Thread Carrie Pillow 
Do a backup before working on your data in Access, it can be useful, but if you 
are not careful , you can corrupt your file

Regards

Carrie

From: LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] On 
Behalf Of Scott Hall
Sent: 19 July 2017 17:27
To: Legacy User Group 
Subject: Re: [LegacyUG] Query help

Donald:
Thanks.  I just loaded Access on my computer as it seems improving my Access 
skills is going to be the best way to handle the various things I want to do 
with my database.  At 102,000 individuals and growing, there's often a lot of 
this type of query and consideration I'd like to do.  If OK with you, I may ask 
some query questions from time-to-time.
Scott

On Tue, Jul 18, 2017 at 8:44 PM, Donald Quigley 
> wrote:
Scott,

I don’t believe that you can include an address in a search string.  But you 
can find and tag all individuals with no Burial Place and then scroll through 
the Search Results list looking for the blue button adjacent to the “Buried  
in” field on the Edit page.  If its shaded out, there is no address for the 
Buried Place.  Tag such persons and you will have created the list you want – 
with one caveat:  If the blue button is highlited, there is likely to be a 
burial address – but it could be just an indication of a Burial 
Note/Picture/Cremated (not likely, but possible).  Klunky, but it might work 
for you.

The only sure way I can think of is to go into MS Access and write a suitable 
query.  Easy to say, but not if you don’t know Access.

Donald Quigley
Escondido, CA
Quigley Doyle Family Tree



From: LegacyUserGroup 
[mailto:legacyusergroup-boun...@legacyusers.com]
 On Behalf Of Scott Hall
Sent: Tuesday, July 18, 2017 3:04 PM
To: LegacyUserGroup@legacyusers.com
Subject: [LegacyUG] Query help

I want to build a search query to identify all users with data in the burial 
place field but no attached burial address.  Can anyone assist?  I cannot 
figure out how to get attached addresses into the search string.
Thanks,
Scott

--

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Query help

2017-07-19 Thread Scott Hall 
Donald:

Thanks.  I just loaded Access on my computer as it seems improving my
Access skills is going to be the best way to handle the various things I
want to do with my database.  At 102,000 individuals and growing, there's
often a lot of this type of query and consideration I'd like to do.  If OK
with you, I may ask some query questions from time-to-time.

Scott

On Tue, Jul 18, 2017 at 8:44 PM, Donald Quigley  wrote:

> Scott,
>
>
>
> I don’t believe that you can include an address in a search string.  But
> you can find and tag all individuals with no Burial Place and then scroll
> through the Search Results list looking for the blue button adjacent to the
> “Buried  in” field on the Edit page.  If its shaded out, there is no
> address for the Buried Place.  Tag such persons and you will have created
> the list you want – with one caveat:  If the blue button is highlited,
> there is likely to be a burial address – but it could be just an indication
> of a Burial Note/Picture/Cremated (not likely, but possible).  Klunky, but
> it might work for you.
>
>
>
> The only sure way I can think of is to go into MS Access and write a
> suitable query.  Easy to say, but not if you don’t know Access.
>
>
>
> Donald Quigley
>
> Escondido, CA
>
> Quigley Doyle Family Tree 
>
>
>
>
>
>
>
> *From:* LegacyUserGroup [mailto:legacyusergroup-boun...@legacyusers.com] *On
> Behalf Of *Scott Hall
> *Sent:* Tuesday, July 18, 2017 3:04 PM
> *To:* LegacyUserGroup@legacyusers.com
> *Subject:* [LegacyUG] Query help
>
>
>
> I want to build a search query to identify all users with data in the
> burial place field but no attached burial address.  Can anyone assist?  I
> cannot figure out how to get attached addresses into the search string.
>
> Thanks,
>
> Scott
>
> --
>
> LegacyUserGroup mailing list
> LegacyUserGroup@legacyusers.com
> To manage your subscription and unsubscribe http://legacyusers.com/
> mailman/listinfo/legacyusergroup_legacyusers.com
> Archives at:
> http://www.mail-archive.com/legacyusergroup@legacyusers.com/
>
>
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

[LegacyUG] Locked out of Legacy

2017-07-19 Thread Billy Mittelstadt Jr 
Did a manual merge of individual, and got message can't find individual ID 
44475 (this was not the record numbers of either ID). And then Error Checking 
for shared events. Error 3021: No current record. When hitting user prompt 
"YES" for try again get endless loop. When hitting "NO" prompt, back to 
individual ID 44475 not found and message Run-time-error 440: No current 
record. How do I get Legacy back?
If I do have to revert back to backup file, is there a way to restore sources 
to SourceWriter format?

Thanks for your help.
Bill
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] [MC-SUSPECTED-SPAM] Re: Print Hashtag report

2017-07-19 Thread Sherry 
If you read the "intro" as to why the email is an attachment, you'll
understand. This warning is even posted where you sign up for the list, but
people still continue to use their yahoo and aol accounts

I do find this DMARC stuff terribly annoying. Much of the spam I receive at
my Yahoo email account are actually from other Yahoo accounts, so the DMARC
isn't very helpful!

The Legacy servers are well protected from spam and viruses. There is no
problem with reading these emails.

Sherry


On Wed, Jul 19, 2017 at 6:19 AM,  wrote:

> I DON’T READ ATTACHMENTS !
>
> THEY CARRY VIRUSES !
>
> AJM
>
>
>
> -Original Message- From: wabby62--- via LegacyUserGroup
> Sent: Wednesday, July 19, 2017 7:46 AM
> To: legacyusergroup@legacyusers.com
> Cc: wabb...@aol.com
> Subject: [MC-SUSPECTED-SPAM] Re: [LegacyUG] Print Hashtag report
>
> The original message to the list is in the attachment.
>
> This action is required because of the DMARC Reject/Quarantine Policy
> imposed by some email providers. Users who want to send messages
> without conversion to attachments should use a different email address
> for their subscription.
>
> Known providers for free email accounts whose emails do not require
> this conversion include gmail.com and hotmail.com.  Many other email
> providers will also work but you will have to give them a try.
>
>
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] [MC-SUSPECTED-SPAM] Re: Print Hashtag report

2017-07-19 Thread bwardmor 

I DON’T READ ATTACHMENTS !

THEY CARRY VIRUSES !

AJM



-Original Message- 
From: wabby62--- via LegacyUserGroup

Sent: Wednesday, July 19, 2017 7:46 AM
To: legacyusergroup@legacyusers.com
Cc: wabb...@aol.com
Subject: [MC-SUSPECTED-SPAM] Re: [LegacyUG] Print Hashtag report

The original message to the list is in the attachment.

This action is required because of the DMARC Reject/Quarantine Policy
imposed by some email providers. Users who want to send messages
without conversion to attachments should use a different email address
for their subscription.

Known providers for free email accounts whose emails do not require
this conversion include gmail.com and hotmail.com.  Many other email
providers will also work but you will have to give them a try.





--

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com

Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/ 



---
This email has been checked for viruses by Avast antivirus software.
https://www.avast.com/antivirus


--

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

Re: [LegacyUG] Print Hashtag report

2017-07-19 Thread wabby62--- via LegacyUserGroup 
The original message to the list is in the attachment.

This action is required because of the DMARC Reject/Quarantine Policy
imposed by some email providers. Users who want to send messages
without conversion to attachments should use a different email address
for their subscription.

Known providers for free email accounts whose emails do not require
this conversion include gmail.com and hotmail.com.  Many other email
providers will also work but you will have to give them a try.--- Begin Message ---

 Thanks Cathy, You're right, screen print isn't an option. I needed a 
magnifying glass to read it. I like the hashtag idea, and I have about 200 with 
all the people in different cemeteries. Only about one third done. Now I must 
start all over. These were done in my learning phase of using Legacy and I 
screwed up in that I tried to merge 2 family files and got so many duplicates 
that I think starting over would be easier. Have about 18,000 people and the 
Auto merge only gets a few of the duplicates. Must go through the Manual merge 
to sort the rest. Most failure to merge was caused by dates. Must have complete 
mm/day/yr or they fail to merge. 
Thanks again,
Wayne

 

 

-Original Message-
From: Cathy Pinner 
To: Legacy User Group 
Sent: Tue, Jul 18, 2017 11:44 pm
Subject: Re: [LegacyUG] Print Hashtag report

Wayne

I'm not sure what you are calling the "Master Report list" I think you 
mean the Master List?

Currently you can't print the Hashtag names list. This omission is 
entered in the official list of bugs.

Poor Workaround - screenshot the list and print the screenshot.

Cathy


wabby62--- via LegacyUserGroup wrote:
> How do I print the Hashtag Report from the Master Report list?  Not 
> the contents of a singular entry, but the Hashtag names.
>
> Thanks,
> Wayne Barner


-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/

--- End Message ---
-- 

LegacyUserGroup mailing list
LegacyUserGroup@legacyusers.com
To manage your subscription and unsubscribe 
http://legacyusers.com/mailman/listinfo/legacyusergroup_legacyusers.com
Archives at:
http://www.mail-archive.com/legacyusergroup@legacyusers.com/