Re: Slow/broken USB and Ethernet on Snowballs/Origen boards?
On 03/16/2012 03:35 PM, Sangwook Lee wrote: On 16 March 2012 14:55, Mans Rullgard mans.rullg...@linaro.org wrote: On 16 March 2012 12:36, Sangwook Lee sangwook@linaro.org wrote: Hi Mans On 16 March 2012 11:50, Mans Rullgard mans.rullg...@linaro.org wrote: On 16 March 2012 04:14, Sachin Kamat sachin.ka...@linaro.org wrote: Hi, On 15/03/2012, Mans Rullgard mans.rullg...@linaro.org wrote: Which kernel version are you using on the Origen? I noticed the same problem a while back, but it appears to have been fixed in the Samsung landing team tree. There is still another bug present in the Origen kernel preventing USB-ethernet working with EHCI. Some patches have been posted, but they have not made it into the trees yet. These patches have been added to Samsung LT tree [1]. [1] git://git.linaro.org/landing-teams/working/samsung/kernel.git (branch: tracking) That branch still needs one more patch (attached). Thanks for looking at this git. Initially I submitted patches with the call-back function http://www.spinics.net/lists/linux-usb/msg59212.html But maintainers don't like to use call-back function, and it was rejected. So Now LT doesn't to use this call-back function Yes, I saw that, but the tracking branch in git still has the incomplete callback version. You're right. @Tushar, we need to apply Mans's patch as well. Thanks a lot for the responses and updates on the kernel patches, I will try to give the LT kernel from git a shot next week. - Jannis ___ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
Re: Slow/broken USB and Ethernet on Snowballs/Origen boards?
Hey, On 03/15/2012 01:39 AM, Tony Mansson wrote: Hi, This is interesting. I'd like to reproduce the Ethernet speed tests. Do you have the exact command lines? Sure. You'll need two machines, on being the board. Both need to be in the same 100 or 1000 MBit/s LAN. On the receiver's end, run: netcat -l 8000 /dev/null This will listen for incoming data on a TCP socket on port 8000. Then, given the receiver's IP address, run the following command on the sender's end: dd if=/dev/zero bs=1024k count=256 /dev/tcp/RECEIVER IP/8000 Note that /dev/tcp/XYZ/8000 is a bash-specific feature. When this command has finished, it will tell you the transfer rate. You can cancel it anytime and it will give you the same information. But be sure not to cancel too early as that makes the measurement less reliable. Obviously, you can change count= to whatever you want. E.g. with the Origen, you'd probably want to only send 10-100 MByte. Also, you can swap receiver and sender to make sure that running netcat on the board is not causing things to slow down. Not the best benchmark in the world, but it's simple and you can run it as often if you want to make it more reliable. Hope that helps, Jannis -- Forwarded message -- From: Jannis Pohlmann jannis.pohlm...@codethink.co.uk Date: 14 March 2012 21:04 Subject: Slow/broken USB and Ethernet on Snowballs/Origen boards? To: linaro-dev@lists.linaro.org Hi, I am currently playing with a couple of the development boards for which there are Linaro hwpacks and LEBs. Since what I am trying to do requires a lot of disk and network I/O, I've been paying special attention to the data transfer rates I can get out of these boards. Below is a brief summary of my findings. 1) i.MX 53 * disk I/O using an external SSD drive is very good; good enough to not require further measurements * network I/O is approximately 9-10 MByte/s (perhaps more) which seems ok given the 100 MBit/s Ethernet interface 2) Snowball (PDK, version 8) * it seems to be impossible to get the USB OTG host mode to work, therefore I could not test disk I/O with a USB drive; it appears the OTG port on the version 8 board does not even have enough power for a powered USB to actually go online (I am unaware of the details of how this works unfortunately) * performing network I/O with netcat casues netcat, ksoftirqd and kworker to use ~33% of the CPU each, resulting in 100% CPU usage only to handle the network data transfer * the resulting network transfer rate is about 5.5 MByte/s, which is significantly less than what the 100 MBit/s Ethernet interface should be able to produce 3) Origen * the internal USB hub runs at Full Speed (12 MBit/s), resulting in a maximum USB disk I/O of 1.5 MByte/s * since the board does not feature Ethernet itself, I tried to attach a USB Ethernet controller to it, but of course the transfer rate through that is by the I/O upper limit of the USB hub * I did not test wireless but it is not feasible for what I am trying to do anyway I guess not all of this is surprising. The i.MX performs quite well but unfortunately the CPU is quite slow compared to the others. However, I wonder whether the USB OTG host mode issue on the Snowball is a known problem? Also, network I/O occupying all of the CPU seems to be a bug or at least a dodgy driver. About the Origen: I assume there is nothing that can be done to have High Speed USB on it? Thanks in advance! If anyone needs me to provide more information, I'll gladly try to do that. Regards, Jannis ___ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev ___ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
Re: Slow/broken USB and Ethernet on Snowballs/Origen boards?
Hey, On 03/15/2012 01:26 PM, Mans Rullgard wrote: On 14 March 2012 20:04, Jannis Pohlmann jannis.pohlm...@codethink.co.uk wrote: 3) Origen * the internal USB hub runs at Full Speed (12 MBit/s), resulting in a maximum USB disk I/O of 1.5 MByte/s * since the board does not feature Ethernet itself, I tried to attach a USB Ethernet controller to it, but of course the transfer rate through that is by the I/O upper limit of the USB hub * I did not test wireless but it is not feasible for what I am trying to do anyway Which kernel version are you using on the Origen? I noticed the same problem a while back, but it appears to have been fixed in the Samsung landing team tree. Here's the output of 'uname -a': Linux linaro-developer 3.2.0-1000-origen #0samsung14-Ubuntu SMP PREEMPT Wed Jan 11 18:56:28 UTC 2012 armv7l armv7l armv7l GNU/Linux Got the kernel from http://snapshots.linaro.org/oneiric/lt-origen-oneiric/20120313/1/ There is still another bug present in the Origen kernel preventing USB-ethernet working with EHCI. Some patches have been posted, but they have not made it into the trees yet. Search the mailing lists for s5p usb burst to find them. Is there any estimate on when this (them being merged into the landing team trees) might happen? - Jannis ___ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
Slow/broken USB and Ethernet on Snowballs/Origen boards?
Hi, I am currently playing with a couple of the development boards for which there are Linaro hwpacks and LEBs. Since what I am trying to do requires a lot of disk and network I/O, I've been paying special attention to the data transfer rates I can get out of these boards. Below is a brief summary of my findings. 1) i.MX 53 * disk I/O using an external SSD drive is very good; good enough to not require further measurements * network I/O is approximately 9-10 MByte/s (perhaps more) which seems ok given the 100 MBit/s Ethernet interface 2) Snowball (PDK, version 8) * it seems to be impossible to get the USB OTG host mode to work, therefore I could not test disk I/O with a USB drive; it appears the OTG port on the version 8 board does not even have enough power for a powered USB to actually go online (I am unaware of the details of how this works unfortunately) * performing network I/O with netcat casues netcat, ksoftirqd and kworker to use ~33% of the CPU each, resulting in 100% CPU usage only to handle the network data transfer * the resulting network transfer rate is about 5.5 MByte/s, which is significantly less than what the 100 MBit/s Ethernet interface should be able to produce 3) Origen * the internal USB hub runs at Full Speed (12 MBit/s), resulting in a maximum USB disk I/O of 1.5 MByte/s * since the board does not feature Ethernet itself, I tried to attach a USB Ethernet controller to it, but of course the transfer rate through that is by the I/O upper limit of the USB hub * I did not test wireless but it is not feasible for what I am trying to do anyway I guess not all of this is surprising. The i.MX performs quite well but unfortunately the CPU is quite slow compared to the others. However, I wonder whether the USB OTG host mode issue on the Snowball is a known problem? Also, network I/O occupying all of the CPU seems to be a bug or at least a dodgy driver. About the Origen: I assume there is nothing that can be done to have High Speed USB on it? Thanks in advance! If anyone needs me to provide more information, I'll gladly try to do that. Regards, Jannis ___ linaro-dev mailing list linaro-dev@lists.linaro.org http://lists.linaro.org/mailman/listinfo/linaro-dev
