Re: SLES11 install
Hi Mark, please omit the OSAHWaddr! However, in that case booting the instsys will not run unattended anymore. When the setup routine asks for the MAC address, please leave it blank (press enter twice under z/VM) and the remainder should work. By the way, it has been a good practice to limit the parmfile to 9 lines; maybe that this restriction is no more valid. With kind regards Thorsten Diehl System Test Linux on System z IBM Deutschland Research Development GmbH Vorsitzender des Aufsichtsrats: Martin Jetter Geschaeftsfuehrung: Erich Baier Sitz der Gesellschaft: Boeblingen Registergericht: Amtsgericht Stuttgart, HRB 243294 Mark Pace schrieb am 02.04.2009 21:49: Has anyone successfully installed SLES11 using a Layer2 vswitch? I've installed using layer3 vswitch then migrated to a layer2. Also installed via hipersockets. But can't do an install on a layer2 switch. checking CCW address 0.0.1d00 checking CCW address 0.0.1d01 checking CCW address 0.0.1d02 (portname vswtch1) (Layer2) qeth.933eb7: register layer 2 discipline (Port 0) qdio: 0.0.1d02 OSA on SC 3 using AI:1 QEBSM:0 PCI:1 TDD:1 SIGA:RW AO qeth.e13e5b: 0.0.1d00: MAC address 02:00:85:00:00:06 successfully registered on device eth0 qeth.736dae: 0.0.1d00: Device is a Guest LAN QDIO card (level: V541) with link type GuestLAN QDIO (portname: vswtch1) ccwgroup 0.0.1d00 has network IF eth0 *** glibc detected *** /init: free(): invalid pointer: 0x038ea4e4 *** Kernel panic - not syncing: Attempted to kill init! HCPGIR450W CP entered; disabled wait PSW 00020001 8000 00110E8A My parm file. ramdisk_size=131072 root=/dev/ram1 ro init=/linuxrc TERM=dumb HostIP=199.44.xxx.xx Gateway=199.44.xxx.x Nameserver=199.44.xx.xx HostName=host.domain OSAHWaddr=02-00-85-00-00-06 InstNetDev=osa Netmask=255.255.255.128 Broadcast=199.44.xxx.xxx OsaInterface=qdio OsaMedium=eth Layer2=1 ReadChannel=0.0.1d00 Writechannel=0.0.1d01 DataChannel=0.0.1d02 Portname=vswtch1 PortNo=0 Install=ftp://user:p...@199.44.xxx.xx/DVD1 UseSSH=1 SSHPassword=pass linuxrclog=/dev/console -- Mark Pace Mainline Information Systems 1700 Summit Lake Drive Tallahassee, FL. 32317 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: SLES11 install
Thank you, Thorsten. That worked. On Fri, Apr 3, 2009 at 5:26 AM, Thorsten Diehl tdi...@linux.vnet.ibm.comwrote: Hi Mark, please omit the OSAHWaddr! However, in that case booting the instsys will not run unattended anymore. When the setup routine asks for the MAC address, please leave it blank (press enter twice under z/VM) and the remainder should work. By the way, it has been a good practice to limit the parmfile to 9 lines; maybe that this restriction is no more valid. With kind regards Thorsten Diehl System Test Linux on System z IBM Deutschland Research Development GmbH Vorsitzender des Aufsichtsrats: Martin Jetter Geschaeftsfuehrung: Erich Baier Sitz der Gesellschaft: Boeblingen Registergericht: Amtsgericht Stuttgart, HRB 243294 Mark Pace schrieb am 02.04.2009 21:49: Has anyone successfully installed SLES11 using a Layer2 vswitch? I've installed using layer3 vswitch then migrated to a layer2. Also installed via hipersockets. But can't do an install on a layer2 switch. checking CCW address 0.0.1d00 checking CCW address 0.0.1d01 checking CCW address 0.0.1d02 (portname vswtch1) (Layer2) qeth.933eb7: register layer 2 discipline (Port 0) qdio: 0.0.1d02 OSA on SC 3 using AI:1 QEBSM:0 PCI:1 TDD:1 SIGA:RW AO qeth.e13e5b: 0.0.1d00: MAC address 02:00:85:00:00:06 successfully registered on device eth0 qeth.736dae: 0.0.1d00: Device is a Guest LAN QDIO card (level: V541) with link type GuestLAN QDIO (portname: vswtch1) ccwgroup 0.0.1d00 has network IF eth0 *** glibc detected *** /init: free(): invalid pointer: 0x038ea4e4 *** Kernel panic - not syncing: Attempted to kill init! HCPGIR450W CP entered; disabled wait PSW 00020001 8000 00110E8A My parm file. ramdisk_size=131072 root=/dev/ram1 ro init=/linuxrc TERM=dumb HostIP=199.44.xxx.xx Gateway=199.44.xxx.x Nameserver=199.44.xx.xx HostName=host.domain OSAHWaddr=02-00-85-00-00-06 InstNetDev=osa Netmask=255.255.255.128 Broadcast=199.44.xxx.xxx OsaInterface=qdio OsaMedium=eth Layer2=1 ReadChannel=0.0.1d00 Writechannel=0.0.1d01 DataChannel=0.0.1d02 Portname=vswtch1 PortNo=0 Install=ftp://user:p...@199.44.xxx.xx/DVD1 UseSSH=1 SSHPassword=pass linuxrclog=/dev/console -- Mark Pace Mainline Information Systems 1700 Summit Lake Drive Tallahassee, FL. 32317 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- Mark Pace Mainline Information Systems 1700 Summit Lake Drive Tallahassee, FL. 32317 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390
Re: Guest Billing
for linux servers, ESALPS also gets the disk space by server. Does that help? Marcy Cortes wrote: If you want to change for disk space assigned, not just the i/o sent to those disks, you'll need to either gather that out of the directory source with some code of your own or buy something like CA's VM:Account product. Marcy This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation. -Original Message- From: Linux on 390 Port [mailto:linux-...@vm.marist.edu] On Behalf Of Barton Robinson Sent: Thursday, April 02, 2009 4:15 PM To: LINUX-390@VM.MARIST.EDU Subject: Re: [LINUX-390] Guest Billing Because I get asked often about accounting and charge back for Linux processes, z/VM virtual machines, and Linux applications, I've put up more material explaining what data is available, and how to get that data. The web page is at http://www.VelocitySoftware.com/account.html; =?iso-8859-1?Q?Greg_Dyrda?= wrote: We currently bill for Linux on a per guest basis. I'm wondering what approach others are taking. Specifically, I'm wondering if it is possibl e to bill at the process level and if anyone else is billing that way. -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 -- For LINUX-390 subscribe / signoff / archive access instructions, send email to lists...@vm.marist.edu with the message: INFO LINUX-390 or visit http://www.marist.edu/htbin/wlvindex?LINUX-390 begin:vcard fn:Barton Robinson n:Robinson;Barton adr;dom:;;PO 391209;Mountain View;CA;94039-1209 email;internet:bar...@velocitysoftware.com title:Sr. Architect tel;work:650-964-8867 x-mozilla-html:FALSE url:VelocitySoftware.com version:2.1 end:vcard
