Re: [linux-dvb] Re : TT S2-3200 vlc streaming
manu a écrit : > On 03/11/2008 02:27:31 AM, Vladimir Prudnikov wrote: >> I'm getting late buffers with vlc on some transponders (DVB-S, same >> parameters, good signal guaranteed) while everything is fine with >> others. Using multiproto and TT S2-3200. >> Anyone having same problems? > > Can you give the frequencies of the good and bad transponders, mine are > as follows: > I can receive from 4 transponders (DVB-S): 11093, 11555, 11635, 11675 > MHz. > any channel on 11093: fast lock, perfect picture. > any channel on 11555: lock a bit slower and corrupted stream (lots of > blocky artifacts, myhttv complains about corrupted stream) > any channel on 11635,11675: no lock. > Bye > Manu > > Hi ! What satellite are you talking about ? There are not such transponders on Astra ... ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] TNT Pinnacle PCTV DVB-T 72e
Good morning to everyone, I tested the Stick with windows and it found channels ok.. So what shall I do next? -antti- 2008/3/18, Antti Luoma <[EMAIL PROTECTED]>: > > Hi, > > Tested with same results :( (no channels...) > > Tomorrow I'l (hmm today, its getting late) test this with windows that it > works in there... > > -Antti- > > > 2008/3/18, Albert Comerma <[EMAIL PROTECTED]>: > > > > Just as I pointed a few hours ago; > > > > If you speak french you can have a look here; > > > > http://www.louviaux.com-a.googlepages.com/tntpinnaclepctvdvb-t72e > > > > Or if you don't you can go the fast way; > > > > wget http://www.barbak.org/v4l_for_72e_dongle.tar.bz2 > > tar xvjf v4l_for_72e_dongle.tar.bz2 > > cd v4l-dvb > > sudo cp firmware/dvb-usb-dib0700-1.10.fw /lib/firmware/ > > make all > > sudo make install > > > > That should work for you. Please let me know. > > > > 2008/3/17, Antti Luoma <[EMAIL PROTECTED]>: > > > > > > Hi, > > > > > > I have trying to get Solo Stick (72e) to work for couple of days, but > > > with no luck. So what's the current status of this driver? > > > > > > I did download latest drivers from mercurial today, added PCI_ids for > > > card, modified dib0700_devices.c (in stk7070p_frontend_attach), added > > > device > > > to struct dvb_usb_device_properties dib0700_devices[] where > > > stk7070p_frontend_attach was called. > > > > > > After that it looked promising: > > > > > > usb 6-4: new high speed USB device using ehci_hcd and address 30 > > > [ 6722.607546] usb 6-4: configuration #1 chosen from 1 choice > > > [ 6722.607622] dvb-usb: found a 'Pinnacle PCTV 72e DVB-T' in warm > > > state. > > > [ 6722.607648] dvb-usb: will pass the complete MPEG2 transport stream > > > to the software demuxer. > > > [ 6722.607724] DVB: registering new adapter (Pinnacle PCTV 72e DVB-T) > > > [ 6722.731734] dvb_register_frontend > > > [ 6722.731742] DVB: registering frontend 0 (DiBcom 7000PC)... > > > [ 6722.811550] DiB0070: successfully identified > > > [ 6722.811557] dvb-usb: Pinnacle PCTV 72e DVB-T successfully > > > initialized and connected. > > > > > > > > > BUT if I do a scan I don't get channels (i checked that I have correct > > > frequencies): > > > > > > #scan -o vdr fi-Eurajoki > > > scanning fi-Eurajoki > > > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > > > initial transponder 61000 0 2 9 3 1 2 0 > > > initial transponder 66600 0 2 9 3 1 2 0 > > > initial transponder 72200 0 2 9 3 1 2 0 > > > >>> tune to: 61:I999B8C23D999M64T8G8Y0:T:27500: > > > WARNING: filter timeout pid 0x0011 > > > WARNING: filter timeout pid 0x > > > WARNING: filter timeout pid 0x0010 > > > >>> tune to: 666000:I999B8C23D999M64T8G8Y0:T:27500: > > > __tune_to_transponder:1483: ERROR: Setting frontend parameters failed: > > > 19 No such device > > > >>> tune to: 666000:I999B8C23D999M64T8G8Y0:T:27500: > > > __tune_to_transponder:1483: ERROR: Setting frontend parameters failed: > > > 19 No such device > > > >>> tune to: 722000:I999B8C23D999M64T8G8Y0:T:27500: > > > __tune_to_transponder:1483: ERROR: Setting frontend parameters failed: > > > 19 No such device > > > >>> tune to: 722000:I999B8C23D999M64T8G8Y0:T:27500: > > > __tune_to_transponder:1483: ERROR: Setting frontend parameters failed: > > > 19 No such device > > > dumping lists (0 services) > > > Done. > > > > > > Any thoughts?? > > > > > > -- > > > -Antti- > > > ___ > > > linux-dvb mailing list > > > linux-dvb@linuxtv.org > > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > > > > > > > > > -- > -Antti- -- -Antti- ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] TNT Pinnacle PCTV DVB-T 72e
Are you sure you tested with the new compiled module? Could you verify that in your v4l-dvb/linux/drivers/media/dvb/dvb-usb/dib0700_devices.c you have this on the stk7070p_frontend_attach first line; dib0700_set_gpio(adap->dev, GPIO6, GPIO_OUT, 0); Because I remember with 72e that with GPIO6 set to 1 the tunner is disabled. Anyway, your dmesg should tell more information after the failed tunning. Albert 2008/3/18, Antti Luoma <[EMAIL PROTECTED]>: > > Good morning to everyone, > > I tested the Stick with windows and it found channels ok.. So what shall I > do next? > > -antti- > > 2008/3/18, Antti Luoma <[EMAIL PROTECTED]>: > > > > Hi, > > > > Tested with same results :( (no channels...) > > > > Tomorrow I'l (hmm today, its getting late) test this with windows that > > it works in there... > > > > -Antti- > > > > > > 2008/3/18, Albert Comerma <[EMAIL PROTECTED]>: > > > > > > Just as I pointed a few hours ago; > > > > > > If you speak french you can have a look here; > > > > > > http://www.louviaux.com-a.googlepages.com/tntpinnaclepctvdvb-t72e > > > > > > Or if you don't you can go the fast way; > > > > > > wget http://www.barbak.org/v4l_for_72e_dongle.tar.bz2 > > > tar xvjf v4l_for_72e_dongle.tar.bz2 > > > cd v4l-dvb > > > sudo cp firmware/dvb-usb-dib0700-1.10.fw /lib/firmware/ > > > make all > > > sudo make install > > > > > > That should work for you. Please let me know. > > > > > > 2008/3/17, Antti Luoma <[EMAIL PROTECTED]>: > > > > > > > > Hi, > > > > > > > > I have trying to get Solo Stick (72e) to work for couple of days, > > > > but with no luck. So what's the current status of this driver? > > > > > > > > I did download latest drivers from mercurial today, added PCI_ids > > > > for card, modified dib0700_devices.c (in stk7070p_frontend_attach), > > > > added > > > > device to struct dvb_usb_device_properties dib0700_devices[] where > > > > stk7070p_frontend_attach was called. > > > > > > > > After that it looked promising: > > > > > > > > usb 6-4: new high speed USB device using ehci_hcd and address 30 > > > > [ 6722.607546] usb 6-4: configuration #1 chosen from 1 choice > > > > [ 6722.607622] dvb-usb: found a 'Pinnacle PCTV 72e DVB-T' in warm > > > > state. > > > > [ 6722.607648] dvb-usb: will pass the complete MPEG2 transport > > > > stream to the software demuxer. > > > > [ 6722.607724] DVB: registering new adapter (Pinnacle PCTV 72e > > > > DVB-T) > > > > [ 6722.731734] dvb_register_frontend > > > > [ 6722.731742] DVB: registering frontend 0 (DiBcom 7000PC)... > > > > [ 6722.811550] DiB0070: successfully identified > > > > [ 6722.811557] dvb-usb: Pinnacle PCTV 72e DVB-T successfully > > > > initialized and connected. > > > > > > > > > > > > BUT if I do a scan I don't get channels (i checked that I have > > > > correct frequencies): > > > > > > > > #scan -o vdr fi-Eurajoki > > > > scanning fi-Eurajoki > > > > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > > > > initial transponder 61000 0 2 9 3 1 2 0 > > > > initial transponder 66600 0 2 9 3 1 2 0 > > > > initial transponder 72200 0 2 9 3 1 2 0 > > > > >>> tune to: 61:I999B8C23D999M64T8G8Y0:T:27500: > > > > WARNING: filter timeout pid 0x0011 > > > > WARNING: filter timeout pid 0x > > > > WARNING: filter timeout pid 0x0010 > > > > >>> tune to: 666000:I999B8C23D999M64T8G8Y0:T:27500: > > > > __tune_to_transponder:1483: ERROR: Setting frontend parameters > > > > failed: 19 No such device > > > > >>> tune to: 666000:I999B8C23D999M64T8G8Y0:T:27500: > > > > __tune_to_transponder:1483: ERROR: Setting frontend parameters > > > > failed: 19 No such device > > > > >>> tune to: 722000:I999B8C23D999M64T8G8Y0:T:27500: > > > > __tune_to_transponder:1483: ERROR: Setting frontend parameters > > > > failed: 19 No such device > > > > >>> tune to: 722000:I999B8C23D999M64T8G8Y0:T:27500: > > > > __tune_to_transponder:1483: ERROR: Setting frontend parameters > > > > failed: 19 No such device > > > > dumping lists (0 services) > > > > Done. > > > > > > > > Any thoughts?? > > > > > > > > -- > > > > -Antti- > > > > ___ > > > > linux-dvb mailing list > > > > linux-dvb@linuxtv.org > > > > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > > > > > > > > > > > > > > > > -- > > -Antti- > > > > > -- > -Antti- > ___ > linux-dvb mailing list > linux-dvb@linuxtv.org > http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] New unsupported device
Could you try with the files I send? .config must go to v4l-dvb/v4l/ folder (it's for just compiling dibcom stuff), dib0700_devices.c and dvb-usb-ids.h go to v4l-dvb/linux/drivers/media/dvb/dvb-usb/ Albert 2008/3/18, insomniac <[EMAIL PROTECTED]>: > > On Mon, 17 Mar 2008 23:59:07 +0100 > > "Albert Comerma" <[EMAIL PROTECTED]> wrote: > > > > It's not clear that the patch worked with the differences of the > > source (it has a reference to the identifier matrix). I will try to > > add it just to check there's no problem with that. But tomorrw... > > > Yes, they differ, so I tried to patch by hand. In attachment the patch > I did based on Antti's patch and your tarball (after a make clean). > Don't really know if that makes sense in my case. > > Regards, > > -- > > Andrea Barberio > > [EMAIL PROTECTED] - Linux&C. > [EMAIL PROTECTED] - Slackware Linux Project Italia > GPG key on http://insomniac.slackware.it/gpgkey.asc > 2818 A961 D6D8 1A8C 6E84 6181 5FA6 03B2 E68A 0B7D > SIP: 5327786, Phone: 06 916503784 > > files.tgz Description: GNU Zip compressed data ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] [PATCH] Updated analog only support of Avermedia A700 cards - adds RF input support via XC2028 tuner (untested)
On Sun, 16 Mar 2008 11:31:37 +0100 Matthias Schwarzott <[EMAIL PROTECTED]> wrote: > Hi there! > > I updated this patch to support both Avermedia A700 cards (AverTV DVB-S Pro > and AverTV DVB-S Hybrid+FM). > > The RF input of the Hybrid+FM card (with XC2028 tuner) is still untested. > > I would be happy if any of the XC2028 experts could have a look at this patch. For this to work, you'll need to set xc3028 parameters. This device needs a reset during firmware load. This is done via xc3028_callback. To reset, you need to turn some GPIO values, and then, return they back to their original values. The GPIO's are device dependent. So, you'll need to check with some software like Dscaler's regspy.exe what pins are changed during reset. Also, there are two ways for audio to work with xc3028/2028: MTS mode and non-mts. You'll need to test both ways. A final notice: most current devices work fine with firmware v2.7. However, a few devices only work if you use an older firmware version. Could you please send us the logs with i2c_scan=1? Please, use the latest version of v4l-dvb, since I did some fixes for cx88 and saa7134 there recently. Cheers, Mauro ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] [PATCH] Updated analog only support of Avermedia A700 cards - adds RF input support via XC2028 tuner (untested)
On Dienstag, 18. März 2008, Mauro Carvalho Chehab wrote: > On Sun, 16 Mar 2008 11:31:37 +0100 > > For this to work, you'll need to set xc3028 parameters. This device needs a > reset during firmware load. This is done via xc3028_callback. To reset, you > need to turn some GPIO values, and then, return they back to their original > values. The GPIO's are device dependent. So, you'll need to check with some > software like Dscaler's regspy.exe what pins are changed during reset. I can only have a look at the wiring. > > Also, there are two ways for audio to work with xc3028/2028: MTS mode and > non-mts. You'll need to test both ways. > > A final notice: most current devices work fine with firmware v2.7. However, > a few devices only work if you use an older firmware version. > > Could you please send us the logs with i2c_scan=1? > I do not have that hardware. I only have the A700 without XC2028 soldered on it. But maybe Peter can help out on this. > Please, use the latest version of v4l-dvb, since I did some fixes for cx88 > and saa7134 there recently. > I do use latest v4l-dvb tree and create patches on top of this. As this card is labled Hybrid+FM I should also add a radio section, I guess. Regards Matthias -- Matthias Schwarzott (zzam) ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] [PATCH] Updated analog only support of Avermedia A700 cards - adds RF input support via XC2028 tuner (untested)
On Tue, 18 Mar 2008 13:39:12 +0100 Matthias Schwarzott <[EMAIL PROTECTED]> wrote: > On Dienstag, 18. März 2008, Mauro Carvalho Chehab wrote: > > On Sun, 16 Mar 2008 11:31:37 +0100 > > > > For this to work, you'll need to set xc3028 parameters. This device needs a > > reset during firmware load. This is done via xc3028_callback. To reset, you > > need to turn some GPIO values, and then, return they back to their original > > values. The GPIO's are device dependent. So, you'll need to check with some > > software like Dscaler's regspy.exe what pins are changed during reset. > > I can only have a look at the wiring. This may help, but should be validated with the hardware test, since it may need to enable/disable more than one bit. > > Also, there are two ways for audio to work with xc3028/2028: MTS mode and > > non-mts. You'll need to test both ways. > > > > A final notice: most current devices work fine with firmware v2.7. However, > > a few devices only work if you use an older firmware version. > > > > Could you please send us the logs with i2c_scan=1? > > > > I do not have that hardware. I only have the A700 without XC2028 soldered on > it. But maybe Peter can help out on this. It would be nice if he could help us. > > Please, use the latest version of v4l-dvb, since I did some fixes for cx88 > > and saa7134 there recently. > > > I do use latest v4l-dvb tree and create patches on top of this. > As this card is labled Hybrid+FM I should also add a radio section, I guess. Yes, but you've already added it. Radio entry is generally identical to TV, on the devices with xc3028. I suspect that your radio entry should work. Cheers, Mauro ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] Any chance of help with v4l-dvb-experimental / Avermedia A16D please?
On Mon, 17 Mar 2008 19:28:32 + "Richard (MQ)" <[EMAIL PROTECTED]> wrote: > Mauro Carvalho Chehab wrote: > > > Sorry for a late answer. Too busy from my side :( > > And apologies from me for very slow response too. I've been away, and > although I'm back I'm now using a different box for this problem, with a > brand new Linux installation. I'm running OpenSuSE 11.0 Alpha-2 and > having big problems compiling the hg code - I think it's my (admittedly > alpha) system. You could also get the latest tarball via: http://linuxtv.org/hg/v4l-dvb/archive/tip.tar.bz2 Of course, having mercurial installed is much better ;) > > I'll keep at it and get back to you as soon as I can test your patch. > Not sure whether timf's issues are the same but I'm following that > thread too. > > Thanks for your patience ! ;-) You're welcome. Cheers, Mauro ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] Any chance of help with v4l-dvb-experimental / Avermedia A16D please?
On Sat, 15 Mar 2008 18:33:56 +0900 timf <[EMAIL PROTECTED]> wrote: > [ 15.00] saa7133[0]: subsystem: 1461:f936, board: AVerMedia Hybrid > TV/Radio (A16D) [card=137,autodetected] > [ 15.296000] tuner' 2-0061: Setting mode_mask to 0x0e > [ 15.296000] tuner' 2-0061: chip found @ 0xc2 (saa7133[0]) > [ 15.296000] tuner' 2-0061: tuner 0x61: Tuner type absent The above is not right. It should be using type=71 for the tuner. I think I found the bug: the tuner addresses should be set to ADDR_UNSET, instead of keeping it blank. Please do an "hg pull -u" and try again, recompiling and re-installing the modules: hg pull -u make rmmod make make install modprobe saa7134 > 8) The chip on my card is xc3018. Why does module xc5000 load? This is an issue on the way cards are attached, at tuner_core. Since they directly access xc5000 code, with: if (!xc5000_attach(&t->fe, t->i2c->adapter, &xc5000_cfg)) { xc5000 module will be loaded, even if not used. It shouldn't be hard to fix this, by using the macro dvb_attach(). Cheers, Mauro ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
[linux-dvb] dib7770 tunner
Hi all, having a look to the pinnacle card of Andrea Barberio, we find out that it uses a dib7770-PA with integrated tuner. It seems to load correctly the firmware but we don't know how to comunicate with the tuner. Anybody knows which tuner we should use? and if we can work with this chip as other Dibcom7700 just changing the tuner? And finally, there is the firmware stuff, it should use the same dibcom firmware as other devices? Albert ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] Kworld DVB-T 210 - dvb tuning problem
Hi Hartmut, Apologies for the length of this msg, I'm not sure what info you may need, so I'm trying to show you that all is not right. 1) New install of ubuntu 7.10 i386. 2) Install Me-tv, Tvtime. Me-tv, in the absence of a channels.conf, scans via /usr/share/doc/dvb-utils/examples/scan/dvb-t 3) I placed au-Perth_roleystone into /usr/share/doc/dvb-utils/examples/scan/dvb-t: # Australia / Perth (Roleystone transmitter) # T freq bw fec_hi fec_lo mod transmission-mode guard-interval hierarchy # SBS T 70450 7MHz 2/3 NONE QAM64 8k 1/8 NONE # ABC T 72550 7MHz 3/4 NONE QAM64 8k 1/16 NONE # Seven T 74650 7MHz 2/3 NONE QAM64 8k 1/16 NONE # Nine T 76750 7MHz 3/4 NONE QAM64 8k 1/16 NONE # Ten T 78850 7MHz 3/4 NONE QAM64 8k 1/16 NONE 4) Started Me-tv Here is the output of Me-tv as it does it's first scan: Failed to tune to transponder at 70450 (Yet I'm viewing SBS on a diff box!) Failed to tune to transponder at 70450 Found channel: ABC HDTV Found channel: ABC1 Found channel: ABC2 Found channel: ABC1 Found channel: ABC3 Found channel: ABC DiG Radio Found channel: ABC DiG Jazz Found channel: 7 Digital Found channel: 7 HD Digital Found channel: 7 Digital 1 Found channel: 7 Digital 2 Found channel: 7 Digital 3 Found channel: 7 Program Guide Found channel: Nine Digital Found channel: Nine HD Found channel: TEN HD Found channel: TEN Digital Found channel: TEN HD Here is the first channels.conf Me-tv created: ABC HDTV:72550:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:516:0:736 ABC1:72550:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:737 ABC2:72550:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:513:651:738 ABC1:72550:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:739 ABC3:72550:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:740 ABC DiG Radio:72550:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:0:690:742 ABC DiG Jazz:72550:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:0:700:743 7 Digital:74650:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:1537:1538:1376 7 Digital 1:74650:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:1537:1538:1377 7 Digital 2:74650:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:1537:1538:1378 7 Digital 3:74650:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:1537:1538:1379 7 HD Digital:74650:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:1601:0:1380 7 Program Guide:74650:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_2_3:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:1633:1634:1382 Nine Digital:76750:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1025 Nine HD:76750:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:522:0:1030 TEN HD:78850:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:514:0:1665 TEN Digital:78850:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:512:650:1669 TEN HD:78850:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:514:0:1672 4) Deleted channels.conf, Me-tv rescan: Here is the output of Me-tv as it does it's second scan: Failed to tune to transponder at 70450 (SBS still viewed on diff box) Failed to tune to transponder at 70450 Failed to tune to transponder at 72550 (only 3 channels here - ABC HDTV, ABC1, ABC2) Found channel: ABC HDTV Found channel: ABC1 Found channel: ABC2 Found channel: ABC1 Found channel: ABC3 Found channel: ABC DiG Radio Found channel: ABC DiG Jazz Found channel: 7 Digital Found channel: 7 HD Digital Found channel: 7 Digital 1 Found channel: 7 Digital 2 Found channel: 7 Digital 3 Found channel: 7 Program Guide Found channel: Nine Digital Found channel: Nine HD Found channel: TEN HD Found channel: TEN Digital Found channel: TEN HD Here is the second channels.conf Me-tv created: ABC HDTV:72550:INVERSION_AUTO:BANDWIDTH_7_MHZ:FEC_3_4:FEC_AUTO:QAM_64:TRANSMISSION_MODE_8K:GUARD_INTERVAL_1_16:HIERARCHY_NONE:516:0:736 ABC1:72550:IN
Re: [linux-dvb] dib7770 tunner
Albert Comerma wrote: > Hi all, having a look to the pinnacle card of Andrea Barberio, we find > out that it uses a dib7770-PA with integrated tuner. It seems to load > correctly the firmware but we don't know how to comunicate with the > tuner. Anybody knows which tuner we should use? and if we can work with > this chip as other Dibcom7700 just changing the tuner? And finally, > there is the firmware stuff, it should use the same dibcom firmware as > other devices? dib7770 is 3 in 1 solution, usb-bridge + demodulator + tuner. You can try dib7070 tuner driver. STK7070P looks rather similar (but less integrated). Regards Antti -- http://palosaari.fi/ ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] dib7770 tunner
On Tue, 18 Mar 2008 17:16:20 +0200 Antti Palosaari <[EMAIL PROTECTED]> wrote: > dib7770 is 3 in 1 solution, usb-bridge + demodulator + tuner. You can > try dib7070 tuner driver. STK7070P looks rather similar (but less > integrated). If I'm not wrong, after taking a look at the sources, dib7070 tuner driver is located into dvb_usb_dib0700.ko module. Well, it's actually loaded, but tuner still doesn't work. Anyway, dmesg says that the kernel tries to load mt2060 module, but that it fails: DVB: registering frontend 0 (DiBcom 7000PC)... mt2060 I2C read failed So.. was I wrong? How can I force to use dib7070 tuner driver as you just suggested? Sorry for dumb questions, but I have a DVB card since 5 days. Thanks, -- Andrea Barberio [EMAIL PROTECTED] - Linux&C. [EMAIL PROTECTED] - Slackware Linux Project Italia GPG key on http://insomniac.slackware.it/gpgkey.asc 2818 A961 D6D8 1A8C 6E84 6181 5FA6 03B2 E68A 0B7D SIP: 5327786, Phone: 06 916503784 ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] dib7770 tunner
On Tue, 18 Mar 2008 16:38:12 +0100 insomniac <[EMAIL PROTECTED]> wrote: > On Tue, 18 Mar 2008 17:16:20 +0200 > Antti Palosaari <[EMAIL PROTECTED]> wrote: > > > dib7770 is 3 in 1 solution, usb-bridge + demodulator + tuner. You > > can try dib7070 tuner driver. STK7070P looks rather similar (but > > less integrated). after talking with Albert about it, I moved this code: {"Pinnacle PCTV 73e", { &dib0700_usb_id_table[27], NULL }, { NULL }, } after this code: { "Hauppauge Nova-T MyTV.t", { &dib0700_usb_id_table[26], NULL }, { NULL }, } in linux/drivers/media/dvb/dvb-usb/dib0700_devices.c . After I plug the stick, I see the led to light on, and dmesg says: dvb-usb: found a 'Pinnacle PCTV 73e' in cold state, will try to load a firmware dvb-usb: downloading firmware from file 'dvb-usb-dib0700-1.10.fw' dib0700: firmware started successfully. dvb-usb: found a 'Pinnacle PCTV 73e' in warm state. dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer. DVB: registering new adapter (Pinnacle PCTV 73e) DVB: registering frontend 0 (DiBcom 7000PC)... mt2060 I2C read failed input: IR-receiver inside an USB DVB receiver as /class/input/input13 dvb-usb: schedule remote query interval to 150 msecs. dvb-usb: Pinnacle PCTV 73e successfully initialized and connected. All the files in /dev/dvb/adapter0 get created, including tuner0, but of course tuner is not working (as w_scan can show). The solutions seems not to be far.. Anyone has an idea? Regards, -- Andrea Barberio [EMAIL PROTECTED] - Linux&C. [EMAIL PROTECTED] - Slackware Linux Project Italia GPG key on http://insomniac.slackware.it/gpgkey.asc 2818 A961 D6D8 1A8C 6E84 6181 5FA6 03B2 E68A 0B7D SIP: 5327786, Phone: 06 916503784 ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] dib7770 tunner
insomniac wrote: > On Tue, 18 Mar 2008 16:38:12 +0100 > insomniac <[EMAIL PROTECTED]> wrote: > >> On Tue, 18 Mar 2008 17:16:20 +0200 >> Antti Palosaari <[EMAIL PROTECTED]> wrote: >> >>> dib7770 is 3 in 1 solution, usb-bridge + demodulator + tuner. You >>> can try dib7070 tuner driver. STK7070P looks rather similar (but >>> less integrated). > > after talking with Albert about it, I moved this code: > > {"Pinnacle PCTV 73e", > { &dib0700_usb_id_table[27], NULL }, > { NULL }, > } > > after this code: > > { "Hauppauge Nova-T MyTV.t", > { &dib0700_usb_id_table[26], NULL }, > { NULL }, > } > > in linux/drivers/media/dvb/dvb-usb/dib0700_devices.c . > > After I plug the stick, I see the led to light on, and dmesg says: > > dvb-usb: found a 'Pinnacle PCTV 73e' in cold state, will try to load a > firmware dvb-usb: downloading firmware from file > 'dvb-usb-dib0700-1.10.fw' dib0700: firmware started successfully. > dvb-usb: found a 'Pinnacle PCTV 73e' in warm state. > dvb-usb: will pass the complete MPEG2 transport stream to the software > demuxer. DVB: registering new adapter (Pinnacle PCTV 73e) > DVB: registering frontend 0 (DiBcom 7000PC)... > mt2060 I2C read failed I don't understand how dib7070p_tuner_attach could call mt2060. > All the files in /dev/dvb/adapter0 get created, including tuner0, but > of course tuner is not working (as w_scan can show). > > The solutions seems not to be far.. Anyone has an idea? > > Regards, regards Antti -- http://palosaari.fi/ ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb
Re: [linux-dvb] dib7770 tunner
On Tue, 18 Mar 2008 18:15:27 +0200 Antti Palosaari <[EMAIL PROTECTED]> wrote: > > DVB: registering frontend 0 (DiBcom 7000PC)... > > mt2060 I2C read failed > > I don't understand how dib7070p_tuner_attach could call mt2060. Is there anything I can do to make you debug it? -- Andrea Barberio [EMAIL PROTECTED] - Linux&C. [EMAIL PROTECTED] - Slackware Linux Project Italia GPG key on http://insomniac.slackware.it/gpgkey.asc 2818 A961 D6D8 1A8C 6E84 6181 5FA6 03B2 E68A 0B7D SIP: 5327786, Phone: 06 916503784 ___ linux-dvb mailing list linux-dvb@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb