OT: Education info request
Hi list. Sorry to be off topic but here is the only place where I can ask it and be sure to recieve a correct answer. I am at age of 18(before army) and completely confused how to get good education in israel. The only acceptable course I found is a RHCE from sivan.co.il. But curretly I don't have anything so will it help me if I will have RHCE ? Do I need full "bagrut" to get good job ? will any of Micro$oft courses(A+,Network+) help me in my Linux feuture ? I know about 4 of my friends that have the same problem, we don't know what and where to learn even if we have money. We all dream about becoming linux network admins but we don't know where to start our carrier. We read every how-to we find we spend money to keep our free server always on-line to get expirience but when we go to computer shop to find any PC related job they ask us: where did you learn ? what certs you have ? and if we say something about linux they lought and say common leave us alone please. I belieave that many of you people pasted the same. Can you tell me what way should people like me go ? Best Regards X-Kent _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp. = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
MS compares Embedded Windows XP with Embedded Linux
Hi list. It seems like new microsoft offense has been lauched. It is not the latest news but I hadn't see anything about it in the list. http://www.microsoft.com/Windows/embedded/xp/evaluation/compare/notlinux.asp _ Join the worlds largest e-mail service with MSN Hotmail. http://www.hotmail.com = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
Re: OT: Education info request
Hi didi. I know that it is perfect to be sysadmin in the army. I asked them for that, they asked me ofcouse what education I have and I had nothing to answer. If you could give me that names of people that can help me, it would be great. I am not a fighter or something I am going to "Jobnik" as I am the only son in single paren family. If you will give me their names, can you tell me who are them as I will know what to ask and who I am talking with. Best Regards. S.A. >From: [EMAIL PROTECTED] >To: Stiven Andre <[EMAIL PROTECTED]> >Subject: Re: OT: Education info request >Date: Sun, 16 Dec 2001 13:11:14 +0200 > >Hi Stiven, > >One of the best ways is to try and become a sysadmin in the army. If >you want, I can try to give you names of people that can try to help >you in this. >Even if you do not arrange this before you enter the army, you can >usually become a sysadmin anywhere you arrive, assuming you are not >a fighter or something like that. >Almost any company will want to get you if you have 3 years of >experience from the army. > >I can also add, that in general, certs are good, but experience is >even better. Try to get a 'lower class' job and get promotion after >you are there, and get experience. > >Good luck, > > Didi > >On Thu, Dec 13, 2001 at 06:39:54PM +0200, Stiven Andre wrote: > > Hi list. > > > > Sorry to be off topic but here is the only place where I can ask it and > > be sure to recieve a correct answer. > > I am at age of 18(before army) and completely confused how to get good > > education in israel. > > The only acceptable course I found is a RHCE from sivan.co.il. > > But curretly I don't have anything so will it help me if I will have >RHCE ? > > Do I need full "bagrut" to get good job ? will any of Micro$oft > > courses(A+,Network+) help me in my Linux feuture ? > > I know about 4 of my friends that have the same problem, we don't know >what > > and where to learn even if we have money. We all dream about becoming >linux > > network admins but we don't know where to start our carrier. We read >every > > how-to we find we spend money to keep our free server always on-line to >get > > expirience but when we go to computer shop to find any PC related job >they > > ask us: where did you learn ? what certs you have ? and if we say >something > > about linux they lought and say common leave us alone please. I belieave > > that many of you people pasted the same. Can you tell me what way should > > people like me go ? > > > > Best Regards > > X-Kent > > > > > > _ > > Get your FREE download of MSN Explorer at >http://explorer.msn.com/intl.asp. > > > > > > = > > To unsubscribe, send mail to [EMAIL PROTECTED] with > > the word "unsubscribe" in the message body, e.g., run the command > > echo unsubscribe | mail [EMAIL PROTECTED] _ Join the worlds largest e-mail service with MSN Hotmail. http://www.hotmail.com = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
xawtv problem
Hi list. I am using xawtv-3.54-5, I have Flyvideo 98 FM card (bttv) Dist: RedHat 7.2. When I first ran xawtv without touching any configuration files It was unable to detect any channels, but video input worked with sound but black/white. I rtmfed the menual/bttv how-to and started to configure it for my card tuner, card type. I tryed many card/tuner types, played with frequencietys, and I was using scantv program to detect channels. After I found right module/freq/card type and scantv found some channels I tryed to run xawtv again. I stared but the TV screan appeared a little upper then it should be, right click stoped working, and I couldn't shut it down, when I tryed to do anything it was leaving garbage on the screen and I was forced to relogin. I tryed to backup everything "modules.conf" checked for .xawtv configuration file in homedir (doesn't exists), tryed to find xawtvrc default conf file that is mentioned in menual (doesn't exists). Basicly backed up everything as it was (even removed and then installed xawtv rpm) but now I can't get anything, when I start it it stucks and leaves garbage on the screan so I forced to relogin. Maybe it chaged any conf in /proc or anywhere ? anybody knows what elso may automaticly change when I play with modules ? Best Regards. X-Kent. _ Chat with friends online, try MSN Messenger: http://messenger.msn.com = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
Re: XF86Config problem
From: Amir Tal <[EMAIL PROTECTED]> Reply-To: [EMAIL PROTECTED] To: Daniel Pearson <[EMAIL PROTECTED]> CC: [EMAIL PROTECTED] Subject: Re: XF86Config problem Date: Tue, 8 Oct 2002 20:34:29 +0200 On Tuesday 08 October 2002 06:25 pm, Daniel Pearson wrote: > On Tue, Oct 08, 2002, Amir Tal <[EMAIL PROTECTED]> wrote the following: > > this is mandrake 9, fresh install . > > my card is NVidia GEforce MX. everything worked very nicly after > > installation. i rebooted the machine today, and X will not load. it > > complains that "no screens found", which is kinda redicules since i didnt > > change anything in the config file, and didnt change anything in my > > hardware since the last time it worked. > > Look for clues in /var/log/XFree86.0.log. If it doesn't make any sense > to you, try posting it to the list and let others take a look at it. log attached. anyone ? tal. << XFree86.0.log >> May be it will not help but. I had the same problem with my Radeon VE card. It worked fine and then just stoped working with the same message. The problem was in the TV out. If your card has a TV out and you have connected something to it, just unplug the cable and then reboot your machine twice and try to start the X server. Regards. S.A. _ MSN Photos is the easiest way to share and print your photos: http://photos.msn.com/support/worldwide.aspx = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
Searching For TV Player
Hi My Name Is Stiven Andre And I Am New To This E-Mailing List, So Sorry If I Will Break Any Rules. I Have A FlyVideo 98FM Tv Card And I Can't Find Any Tv Viewer For Linux I Am Using Red Hat 7 (With 2.4.16-22 Kernel). I Think That My TV Card Is Identified As "bttv". I Checked The Kernel Configuration And Found A Module Called bttv. I Tryed Many Tv Viewers Like (TV For Linux ,zeppling) But Did Not Find Any Working. Please Help Me To Find A Viewer And Give Me A Small Brief How To Use It Becouse I Am Newbie To Linux OS. Thanks For Assisstance. X-Kent. _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
Request Advice Of LAN Building.
Hello There. I Am Thinking About Buying An Adsl Internet But I Have 4 PCs At My Home And I Wanna Build A LAN That Will Be Connected To The Internet. I Am Newbie To Linux OS So Please Don't Use Speciffic Words If You Will Answer Me. Unknown command. Curretly I Have LAN (2 PCs Connected By Ethernet Cards Without A HUB, By Crossover Cable). I Can Connect The Seconfd PC Two The Internet Only By A Wingate (Used wINDOWS) But It Is A Poor Method I Think. I Am Not Sure What Hardware Should I Buy To Build It. I Heared About dsl Router Or Something Like It But I Don't Know How It Unknown command. Works. I Think That I Will Build It This Way: I Will Buy A dsl router And A Hub Or Switch. After That I Will Connect Router To The HUB/Switch. And Finily Connect All My PC's To The HUB/Swtich. I Sounds Good But I Know How To Configure Interfaces If I Will Have Only 1 IP Adress :-(. If Somebody has Time To Plan My LAN Another Way Or Correcting My Plan Please E-Mail Me. Thanx. X-Kent. "Computer Is Almost Man But Without A Fantacy" "X-Kent" _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
Linux And Windows File Sharring Question.
Hi There. Can You Please Tell Me Can I Get Any Directory In Linux To Be Shared And Avilable For Windows Network Neighborhood ? Sorry If My Question Is Stupid :-( "X-Kent" "Computer Is Almost Man, But Without A Fantacy" _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
NIC Goes Down After 5-10 minutes in rh6.2
Hi I have RH6.2 full without updates or patches running on Pentium 1 100mhz 24mb of ram. I have a strange problem with network. That machine has 3Com Etherlink 3 NIC 10mbps. it is configured to get interface up at bootup. It brings up the inerface it is works. But After 5-10 minut it is goes down. I preform: if config eth0 down if config eth0 up it replies: eth0: Setting Rx mode to 0 adresses. eth0: Setting Rx mode to 1 adresses. and start work again for about 5-10 minutes. If I am trying to use ftp server to upload or download something it is going down Emidiatly. What is wrong ? Best Regards S.A.Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
Re: NIC Goes Down After 5-10 minutes in rh6.2
I Checked The Cable It fine May It Be Becouse Of The Low Ammount Of RAM ? It HAs Only 24mb But 100mb for swapping >From: Cedar Cox <[EMAIL PROTECTED]> >To: Stiven Andre <[EMAIL PROTECTED]> >Subject: Re: NIC Goes Down After 5-10 minutes in rh6.2 >Date: Thu, 5 Jul 2001 02:43:02 +0300 (IDT) > > >As unlikely as it might be, what about the cable? Maybe swap it just to >be sure? > >On Thu, 5 Jul 2001, Stiven Andre wrote: > > > Hi > > I have RH6.2 full without updates or patches running on Pentium 1 100mhz > > 24mb of ram. I have a strange problem with network. That machine has 3Com > > Etherlink 3 NIC 10mbps. it is configured to get interface up at bootup. > > It brings up the inerface it is works. But After 5-10 minut it is goes > > down. I preform: > > if config eth0 down > > if config eth0 up > > > > it replies: > > eth0: Setting Rx mode to 0 adresses. > > eth0: Setting Rx mode to 1 adresses. > > > > and start work again for about 5-10 minutes. > > If I am trying to use ftp server to upload or download something it is > > going down Emidiatly. > > > > What is wrong ? > > > > Best Regards S.A. > > > > > > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. > > > > = To > > unsubscribe, send mail to [EMAIL PROTECTED] with the word > > "unsubscribe" in the message body, e.g., run the command echo unsubscribe > > | mail [EMAIL PROTECTED] > > > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
RE: NIC Goes Down After 5-10 minutes in rh6.2
>From: Omer Musaev <[EMAIL PROTECTED]> >To: "'Stiven Andre'" <[EMAIL PROTECTED]> >Subject: RE: NIC Goes Down After 5-10 minutes in rh6.2 >Date: Thu, 5 Jul 2001 09:18:59 +0200 > > > >-Original Message- >From: Stiven Andre [mailto:[EMAIL PROTECTED]] >Sent: Thursday, July 05, 2001 1:08 AM >To: [EMAIL PROTECTED] >Subject: NIC Goes Down After 5-10 minutes in rh6.2 > > >Hi >I have RH6.2 full without updates or patches running on Pentium 1 100mhz >24mb of ram. I have a strange problem with network. That machine has 3Com >Etherlink 3 NIC 10mbps. it is configured to get interface up at bootup. It >brings up the inerface it is works. But After 5-10 minut it is goes down. I >preform: >if config eth0 down >if config eth0 up > >it replies: >eth0: Setting Rx mode to 0 adresses. >eth0: Setting Rx mode to 1 adresses. > >There is not enough information to say what the hell is going on. >I suggest you to rebuild debug version of the driver and to post all >debug messages it prints. > >To do that ( I hope the driver is module, otherwise you will have to >recompile the kernel >as well and to remove the driver from static code and to move it to be a >module ): > > >Set kernel logger output to unused console. >To do that, go to /etc/syslog.conf and add line that says: >--- >*.* /dev/tty8 >*.* /tmp/kernl.out >--- >Tabs are important. >restart syslogd ( "/etc/rc.d/init.d/syslog restart" ) >This will dump _all_ messages from kernel and system to /dev/tty8 ( alt-f8 >will bring you there ). > >Then open the code for driver ( /usr/src/linux/drivers/net/3c509.c ) and >edit line 74 and 76 >change line 74 from >-- >int el3_debug = EL3_DEBUG ; >-- >to >-- >int el3_debug = 9 ; >-- >and line 76 from: >-- >int el3_debug = 2; >-- >to >-- >int el3_debug = 9 ; >-- >Recompile the driver with command: > >gcc -DMODULE -D__KERNEL__ -Wall -Wstrict-prototypes -O2 -c 3c509.c > >then bring the card down, remove module >insert the newly built module and bring the interface up. > >Then look for all messages from eth0 on tty8 ( or file /tmp/kernl.out ) and >send them to me/list. > I have tryed to debug the problem as you said. but something gone wrong. After restarting the syslog there was no file kernl.out in /tmp directory and alt+f8 gives nothing. I did exactly as you say please check it may be you missed something. Best Regars S.A. > and start work again for about 5-10 minutes. >If I am trying to use ftp server to upload or download something it is going >down Emidiatly. > >What is wrong ? > > > _ > >Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com > . > > > > >= To >unsubscribe, send mail to [EMAIL PROTECTED] with the word >"unsubscribe" in the message body, e.g., run the command echo unsubscribe | >mail [EMAIL PROTECTED] > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
RE:Nic Goes Down after Netwrok Activity
Hi. I am finaly got the debug but it did not gave much info. My Actions: I Preformed ifconfig down ifconfig up The NIC start working i tryed to ping i had no reply i tryed again ifconfig down ifconfig up And This time it worked i had a reply i tryed to access the ftp i accessed it was ok but when i tryed to upload files (2mb) it stoped responding again. Fserv is my hostname (It should be file server) Here is the Log: Jul 4 22:56:01 Fserv syslogd 1.3-3: restart.éÀÌ 4 22:56:01 Fserv syslog: syslogd startup succeeded Jul 4 22:56:02 Fserv kernel: klogd 1.3-3, log source = /proc/kmsg started. éÀÌ 4 22:56:02 Fserv syslog: klogd startup succeeded Jul 4 22:56:02 Fserv kernel: Inspecting /boot/System.map-2.2.14-6.1.1 éÀÌ 4 22:56:01 Fserv syslog: syslogd shutdown succeeded Jul 4 22:56:03 Fserv kernel: Loaded 7343 symbols from /boot/System.map-2.2.14-6.1.1. Jul 4 22:56:03 Fserv kernel: Symbols match kernel version 2.2.14. Jul 4 22:56:03 Fserv kernel: Loaded 107 symbols from 4 modules. Jul 4 22:56:38 Fserv kernel: eth0: Setting Rx mode to 0 addresses. Jul 4 22:56:38 Fserv kernel: eth0: Setting Rx mode to 1 addresses.Jul 4 23:03:09 Fserv kernel: eth0: Setting Rx mode to 0 addresses.Jul 4 23:03:09 Fserv kernel: eth0: Setting Rx mode to 1 addresses. Jul 4 23:03:37 Fserv kernel: eth0: Setting Rx mode to 0 addresses.Jul 4 23:03:37 Fserv kernel: eth0: Setting Rx mode to 1 addresses. Jul 4 23:03:47 Fserv in.ftpd[1495]: connect from 192.168.1.10 Jul 4 23:03:51 Fserv ftpd[1495]: FTP LOGIN FROM 192.168.1.10 [192.168.1.10], X-Kent Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
RE:Nic Goes Down after Netwrok Activity
When I turn eth0 interface up i see the indicator in the hub that it is connected. When the interface is responding and if i ping i can see that hub indicates traffic. But once i try to get any heavy network activity or just upload/download any file the interface goes down. The hub still idicates that the computer is connected but event when i ping it is not indicates any traffic. I have only one NIC on that PC. >From: Cedar Cox <[EMAIL PROTECTED]> >To: Stiven Andre <[EMAIL PROTECTED]> >CC: [EMAIL PROTECTED] >Subject: RE:Nic Goes Down after Netwrok Activity >Date: Sun, 8 Jul 2001 13:37:34 +0300 (IDT) > > >Could it be an irq problem? I know NICs sometimes don't like to share >irq, especially with another NIC (at least from my experience). BTW, >(assuming you have one), have you watched the light on your NIC >before/after it "stops responding"? > >On Thu, 5 Jul 2001, Stiven Andre wrote: > > > Hi. > > I am finaly got the debug but it did not gave much info. > > My Actions: > > I Preformed > > ifconfig down > > ifconfig up > > > > The NIC start working > > i tryed to ping i had no reply > > i tryed again > > ifconfig down > > ifconfig up > > And This time it worked i had a reply > > i tryed to access the ftp > > i accessed it was ok but when i tryed to upload files (2mb) > > it stoped responding again. >*snip* > > >To unsubscribe, send mail to [EMAIL PROTECTED] with >the word "unsubscribe" in the message body, e.g., run the command >echo unsubscribe | mail [EMAIL PROTECTED] > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
fork. system login failure
Hi List. I have some strange probelm. I have server running rh7.2 that works 24hours a day and after adding some cron jobs I always recieve the following: When the server runs about 10-20 hours I recieve an error "sh: fork Resource temporary unavilable" for the first 3-4 commands I enter. after that it goes normaly. But if I will leave server alone for 40-50 hours I can't even login (Using the console not remotly). When I type username and pass it logs me in for 2-3 secs after that writes something (not enough time too see what) and logs me out. The server still functionaling normaly all the services wotk as it should but I can't login. Please don't respond with rtfm. I would be glad to do that but I can't find what should I read. "man fork" gives nothing. The cron jobs were setup to run some commands every hour. any sugestions ? Best Regards S.A. _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
Re: fork. system login failure
>From: mulix <[EMAIL PROTECTED]> >To: Stiven Andre <[EMAIL PROTECTED]> >CC: <[EMAIL PROTECTED]> >Subject: Re: fork. system login failure >Date: Mon, 26 Nov 2001 22:03:23 +0200 (IST) > >On Mon, 26 Nov 2001, Stiven Andre wrote: > > > I have some strange probelm. > > I have server running rh7.2 that works 24hours a day and after adding >some > > cron jobs I always recieve the following: > > > > When the server runs about 10-20 hours I recieve an error "sh: fork >Resource > > temporary unavilable" for the first 3-4 commands I enter. > > after that it goes normaly. > > But if I will leave server alone for 40-50 hours I can't even login >(Using > > the console not remotly). When I type username and pass it logs me in >for > > 2-3 secs after that writes something (not enough time too see what) and >logs > > me out. The server still functionaling normaly all the services wotk as >it > > should but I can't login. > >sounds to me like your cron jobs are creating processes which are then >left hanging around, causing later forks to fail. the is a limit on the >number of processes a system can have. > >what do your cron jobs do? >-- >mulix > I have 2 cron jobs: 1: is an excutable to update the my vhost on www.no-ip.com 2: is for automaticly chmod/chown of the /home/ftp it is sctipt looks like this: chown X-Kent:archive -R /home/ftp/mp3 chown X-Kent:archive -R /home/ftp/linux chown X-Kent:archive -R /home/ftp/games chmod -R a-rwx /home/ftp/mp3 chmod -R a-rwx /home/ftp/linux chmod -R a-rwx /home/ftp/games chmod -R u+rwx /home/ftp/mp3 chmod -R u+rwx /home/ftp/linux chmod -R u+rwx /home/ftp/games it is not the exact copy but it is very close, the original sctip has about 10-12 commands. they both places in /etc/cron/hourly and both are marked as exutables. May it confuse my 133mhz 32RAM machine ? The root user also recieves much e-mails from (Cron Deamon) saying: /usr/bin/run-parts: fork: Resource temporarily unavailable. >http://www.pointer.co.il/~mulix/ >http://syscalltrack.sf.net/ > > _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
Re: fork. system login failure
>From: mulix <[EMAIL PROTECTED]> >To: Stiven Andre <[EMAIL PROTECTED]> >CC: <[EMAIL PROTECTED]> >Subject: Re: fork. system login failure >Date: Mon, 26 Nov 2001 23:09:13 +0200 (IST) > >On Mon, 26 Nov 2001, Stiven Andre wrote: > > > I have 2 cron jobs: > > > > 1: is an excutable to update the my vhost on www.no-ip.com > >perhaphs it gets stuck and loops endlessly? maybe but I can't be sure of couse I should find it out. maybe I will try to remove the cron job that excutes it and I will see if the e-mails still comming ? it think that if e-mails will stop than it is 100% problem with the vhost updater program. But by now we are checking with the cronjob I added so I will leave it for now. > > > 2: is for automaticly chmod/chown of the /home/ftp it is sctipt looks >like > > this: > >[snipped] > >looks ok. > > > The root user also recieves much e-mails from (Cron Deamon) > > saying: /usr/bin/run-parts: fork: Resource temporarily unavailable. > >does root receive this email from the first time cron runs (one hour >after power on) or only from some later time? sorry but I am just now see your e-mail I will reboot and answer this question tommorow. > >could you add an hourly cron job for a simple: >ps ax | wc -l | mail -s "number of processes" root. > I have added this cron job I was not sure about the "number of processes" I type 20 (sorry if it is stupid). I made a script with that line and exuted it first time manualy, I recieved a mail that says 145. but now I will reboot. >this should show if the number of processes keeps rising until the >limit is reached, or there's some other problem. >-- >mulix > >http://www.pointer.co.il/~mulix/ >http://syscalltrack.sf.net/ > > > >= >To unsubscribe, send mail to [EMAIL PROTECTED] with >the word "unsubscribe" in the message body, e.g., run the command >echo unsubscribe | mail [EMAIL PROTECTED] > _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
NAT problem
Hello List. I have a home network (192.168.1.1/24) that I want to be masqueraded by my linux router (192.168.1.1) that has 2 ethernet interfaces (eth0 to LAN and eth1 to ADSL modem). My adsl and LAN connections work. I wrote a firewall that should do the masquerading. But I don't know why it doesn't work. My inside hosts can't ping the internet. I tryed to "debug" it the way I could, no luck. If someone has a free time, can you please check my rc.firewall that I attached ? I rewrote it from the "fw-adsl.sh" and maybe there is something worng. If you are ready to help and need other information mail me and I will send it. Best Regards. S.A. _ STOP MORE SPAM with the new MSN 8 and get 2 months FREE* http://join.msn.com/?page=features/junkmail -- Binary/unsupported file stripped by Listar -- -- Type: application/octet-stream -- File: rc.firewall = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
Strange iptables behavior
Hi List. I have my home network being masqueraded by linux router(RH8.0). Network topology: Linux router(192.168.1.1): eth0 to LAN, eth1 to adsl modem. LAN = 192.168.1.* I wrote iptables script that masquerades my network, but the problem is when I run the script from the first time from /etc/rc.d/rc.local it works. But if I then rerun it manualy (by root of couse) it stops working. Inside hosts don't have access to the internet. My script does clear all old rules at the start of it but it doesn't help or else... I tryed to clear all old rules manualy and then run the script, no luck still not working. I tryed to unload all iptables modules then "insmod ip_tables" and after that to run the script again, nothing it doesn't help too... Can someone understand what is going on ? Why it works only the first time ? After the second excution the rules are seem to be the same but inside hosts can't ping internet. There is 2 LOG targets in the script, first with prefix "FORWARD PACKET" and second with prefix "MASQ RULE MATCHED", after the first excution of the script. I see 2 logs for each packet, first "FORWARD PACKET" and then "MASQ RULE MATCHED" but after the second excution, when the NAT doesn't work the logs doesn't show "MASQ RULE MATCHED"... Best Regards. S.A. The script: #!/bin/sh IPTABLES="/sbin/iptables" # Reset all. $IPTABLES -P INPUT ACCEPT $IPTABLES -P OUTPUT ACCEPT $IPTABLES -P FORWARD ACCEPT $IPTABLES -F $IPTABLES -X $IPTABLES -t nat -F # Modules and targets: /sbin/modprobe ipt_LOG /sbin/modprobe ipt_REJECT /sbin/modprobe ipt_MASQUERADE /sbin/modprobe ip_nat_ftp /sbin/modprobe ip_nat_irc /sbin/modprobe ip_conntrack_ftp /sbin/modprobe ip_conntrack_irc # IP Forwarding And Dynamic IP support: echo "1" > /proc/sys/net/ipv4/ip_forward echo "1" > /proc/sys/net/ipv4/ip_dynaddr # Create chains for packet types: $IPTABLES -N tcp_packets $IPTABLES -N udp_packets $IPTABLES -N icmp_packets # INPUT TABLE: # Permit ADSL, gre Tunnel (Protocol 47), loopback and a broadcast. $IPTABLES -A INPUT -p 47 -s 10.0.0.138 -j ACCEPT $IPTABLES -A INPUT -p tcp -s 10.0.0.138 --sport 1723 -j ACCEPT $IPTABLES -A INPUT -s 127.0.0.1 -j ACCEPT $IPTABLES -A INPUT -p ALL -d 192.168.1.255 -j ACCEPT # Ensure that established sessions will not die $IPTABLES -A INPUT -p ALL -m state --state ESTABLISHED,RELATED -j ACCEPT # Allow FTP active and passive port commands: #$IPTABLES -A INPUT -p tcp --sport 21 -m state --state ESTABLISHED -j ACCEPT #$IPTABLES -A INPUT -p tcp --sport 20 -m state --state ESTABLISHED,RELATED -j ACCEPT # Send all other traffic to it's chain: $IPTABLES -A INPUT -p tcp -j tcp_packets $IPTABLES -A INPUT -p udp -j udp_packets $IPTABLES -A INPUT -p icmp -j icmp_packets # OUTPUT TABLE: # Permit all. $IPTABLES -A OUTPUT -j ACCEPT # FORWARD TABLE: $IPTABLES -A FORWARD -m state --state ESTABLISHED,RELATED -j ACCEPT # tcp_packets TABLE: # World accessible services: #$IPTABLES -A tcp_packets -p tcp --dport 21 --syn -j ACCEPT # FTP #$IPTABLES -A tcp_packets -p tcp --dport 80 --syn -j ACCEPT # HTTP # Private services: $IPTABLES -A tcp_packets -s 192.168.1.10/32 -p tcp --dport 23 --syn -j ACCEPT # Telnet $IPTABLES -A tcp_packets -s 192.168.1.10/24 -p tcp --dport 139 --syn -j ACCEPT # NetBIOS-ssn # udp_packets TABLE: # Private services: $IPTABLES -A udp_packets -s 192.168.1.10/24 -p udp --dport 137 -j ACCEPT # NetBIOS-sn $IPTABLES -A udp_packets -s 192.168.1.10/24 -p udp --dport 138 -j ACCEPT # NetBIOS-dgm # MASQUERADING: $IPTABLES -t nat -A POSTROUTING -o ppp0 -j LOG --log-level DEBUG --log-prefix "matched MASQ RULE: " $IPTABLES -t nat -A POSTROUTING -o ppp0 -j MASQUERADE # Set defaults to drop: $IPTABLES -P INPUT ACCEPT $IPTABLES -P OUTPUT ACCEPT $IPTABLES -P FORWARD ACCEPT # Debug $IPTABLES -A FORWARD -j LOG --log-level DEBUG --log-prefix "FORWARD PACKET: " $IPTABLES -A INPUT -j LOG --log-level DEBUG --log-prefix "INPUT PACKET: " $IPTABLES -A OUTPUT -j LOG --log-level DEBUG --log-prefix "OUTPUT PACKET: " _ STOP MORE SPAM with the new MSN 8 and get 2 months FREE* http://join.msn.com/?page=features/junkmail = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
problems building LIRC on redhat 8.0
Hi list. I tryed to build LIRC for my flyvideo 98fm card's remote control and recieved the following when trying to make. [EMAIL PROTECTED] lirc-0.6.6]# make make all-recursive make[1]: Entering directory `/home/x-kent/lirc-0.6.6' Making all in drivers make[2]: Entering directory `/home/x-kent/lirc-0.6.6/drivers' Making all in lirc_dev make[3]: Entering directory `/home/x-kent/lirc-0.6.6/drivers/lirc_dev' DIR=`pwd`; (cd /usr/src/linux-2.4.18-14/; make SUBDIRS=$DIR obj-m=lirc_dev.o modules) /usr/src/linux-2.4.18-14/scripts/pathdown.sh: line 4: TOPDIR: parameter null or not set make[4]: Entering directory `/usr/src/linux-2.4.18-14' make[4]: *** No rule to make target `lirc_dev.o', needed by `modules'. Stop. make[4]: Leaving directory `/usr/src/linux-2.4.18-14' make[3]: *** [lirc_dev.o] Error 2 make[3]: Leaving directory `/home/x-kent/lirc-0.6.6/drivers/lirc_dev' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/home/x-kent/lirc-0.6.6/drivers' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/home/x-kent/lirc-0.6.6' make: *** [all] Error 2 [EMAIL PROTECTED] lirc-0.6.6]# The configure script didn't report any errors. It just said to run make and make install in addition it reported that I will have to use lirc_gpio module. Anyone had the same problem ? It is my third try to build LIRC for a last year. I remeber having the same errors when trying to build on 7.1,7.2,7.3(redhat). Best Regards. S.A. = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
hebrew filenames, documentation needed ?
Hi list. I have surfed the IGLU web site to find any information on how to see Hebrew file names in console. Everything I found were tips like "use codepage=862" or "use iocharset" but no useful guide that will explain the process of all the configuration I should make. May be there is any documentation for it that is not on a website ? Why there is no links or something ? Can you please give a direction where to search or point me to any useful guide for it ? I have a task to create a backup strategy for a Linux SAMBA server. The configuration is: /dev/hdb mounted on /home/public. ext2 file system exported by SAMBA. Windows machines use that share and read/write to it using Hebrew filenames(works without any problems). When I login to SAMBA server with ssh and do ls /home/public all the Hebrew filenames appear as "? .doc" or something. How do I convert it to normal filenames so I will be able to copy them at Linux level ? I as well need the ability to copy these files from a script that is run from crond. I am sure that you faced such problems and have a solution for them that why I ask you. Can you please find a solution for me or give me a direction where to search for one ? Best Regards. S.A. = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
Communicating problems with rh8 httpd server.
Hi List. May be the post is a little OT becouse the problem may as well be in the ISP(as I guess). So here is the situation: I have a rh8 server that is connected by ADSL provided by internet zahav. The server runs apache httpd server and some other services. The problem is that some people are unable to connect to the service, both from Israel and from other countries. There were a situation that I had 2 people that can connect and 3 that can't at the same time. Is there any known problem that may lead to such behavior ? Here is the output of tracert from a win2000 machine that was unable to connect: * Unknown Host * 81.95.128.33 2 110ms * Unknown Host * 217.74.128.41 3 131ms hgl1-pos7-0.datanet.tele.fi 193.227.224.182 4 140ms s-b3-pos6-2.telia.net 213.248.78.2495 150ms uunet-s-b3.telia.net 213.248.78.86 6 141ms so-5-0-0.TR2.STK2.ALTER.NET 146.188.6.85 7 140ms so-6-0-0.TR2.LND2.ALTER.NET 146.188.8.157 8 180ms so-6-0-0.XR2.LND2.ALTER.NET 146.188.7.233 9 170ms 194.ATM1-0-0.GW2.LND2.ALTER.NET 146.188.13.19310 181ms InternetGold-gw.customer.ALTER.NET 146.188.67.70 11 240ms * Unknown Host * 192.117.180.9 12 250ms * Unknown Host * 192.117.180.146 13 251ms * Unknown Host * 213.8.64.233 14 250ms It is the my traceroute output, I am able to connect: [EMAIL PROTECTED] x-kent]$ /usr/sbin/traceroute mg.hopto.org traceroute to mg.hopto.org (80.230.32.93), 30 hops max, 38 byte packets 1 mg2 (192.168.1.2) 0.898 ms 0.443 ms 0.363 ms 2 v2.actcom.co.il (192.114.47.251) 69.416 ms 25.116 ms 25.805 ms 3 rtr76.actcom.co.il (192.114.47.250) 22.726 ms 52.913 ms 22.214 ms 4 IIX-Actcom-A.iix.net.il (192.114.63.73) 65.223 ms 34.680 ms 31.932 ms 5 IZahav-P-IIX.iix.net.il (192.114.63.82) 69.732 ms 24.933 ms 29.667 ms 6 192.117.181.41 (192.117.181.41) 82.576 ms 29.271 ms 28.618 ms 7 Port-Channel3.Jean.inter.net.il (192.117.181.146) 82.009 ms 27.296 ms 27.746 ms 8 213.8.64.233 (213.8.64.233) 76.187 ms 27.253 ms 30.062 ms 9 * * * 10 * * * 11 * * * 12 * * * and so on... The machine IP at that time was(may be till now it is): 80.230.32.93 Just as note for a great internet zahav support, I will notice that I just called tehnician support(035763000 it is the number that their official customer support center answering machine gave me at 3:51am) and everything I heared was "A mispar alav igatem eino poel zmanit". 144 gave me another number(035763030) that answered the same... Didn't thay pay for telephone ??? Best Regards. X-Kent = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
Re: Communicating problems with rh8 httpd server.
On Sun, 2003-06-08 at 20:23, Ilya Konstantinov wrote: > On Sun, Jun 08, 2003 at 03:54:20AM +0300, Stiven Andre wrote: > > Hi List. > > > > May be the post is a little OT becouse the problem may as well be in the > > ISP(as I guess). So here is the situation: I have a rh8 server that is > > connected by ADSL provided by internet zahav. The server runs apache > > httpd server and some other services. The problem is that some people > > are unable to connect to the service, both from Israel and from other > > countries. There were a situation that I had 2 people that can connect > > and 3 that can't at the same time. Is there any known problem that may > > lead to such behavior ? > > Are those always the same machines that can't connect, while others can > connect just fine? > I can't check that but I think yes. Becouse I know some people that tried to access the service many times and failed. > Could it be that you only have 2 MaxClients in your Apache > configuration and both are taken by clients which keep the connection > open (such as Internet Explorer)? (Just guessing here...) > No, the max clients is set to 30 and I don't have a big traffic on my site. I forgot to say that the server hostname is mg.hopto.org(the one that sends you this email)... > Try enabling server status in your Apache configuration and access > http://your-server/server-status to see who's currently connected or > hanging on. > > = > To unsubscribe, send mail to [EMAIL PROTECTED] with > the word "unsubscribe" in the message body, e.g., run the command > echo unsubscribe | mail [EMAIL PROTECTED] > = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
[OT] A note about internet zahav customer care.
May be the post is OT but some weeks ago i wrote a latter about problems connecting to rh8 httpd server that was connected by internet zahav ADSL service. The problem was that some people simply unable to get any response from the server. After calling the technician support and explaining the problem they replied "We are can't hold responsibility of your services" and told me that the user is not offline by now with a nice "Just press a connect button when you will get to your office tomorrow". It took about 20 minutes to proof that the user is on line. When I asked to ping the server(ping blocked by firewall) and support guy didn't got any response he said "if ping doesn't get through then the machine is offline and you of course can't connect". I spent other 15 minutes asking him to copy/paste the IP address into his explorer address field and try to connect to httpd. Then was a 2-3 minutes silent and then "yep, I can connect to the service ummm...". Neither of this helped me to get anyone who can help me with the problem or at least tell me the email so i could send the traceroute response that 5-10 people worldwide get when trying to connect. I doubt that company i work for will use internet zahav in next 24 hours. Best Regards. S.A. = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
Palm m515 on Linux
--=-B1VQDkL5Q+8nA2sVP6Ke Content-Type: text/plain Content-Transfer-Encoding: 7bit Hi list. I just had just buy a m515 USB pda and trying to set it up for a Linux enviroment. After searching the google about 3-4 hours I found a J-Pilot a Gnome-pilot. I choosed gnome-pilot as it work well with my evolution. But is there any way to sync inbox emails from evloution to palm ? All my searches how to transfer any documents/emails/something other then contacts, datebook etc failed. I also tryed to find info but got nothing, is there a way to mount a palm as a filesystem ? For example as I mount my digital camera and copy pictures from there. I have installed multimedia programs on my handheld but there is no way to upload anything without a winapp... Any idias/tips/suggestions what can I do to make my palm more useful are very welcome. -- Best Regards. Stiven Andre(aka X-Kent) MG Founder. Contact info: E-Mail: [EMAIL PROTECTED] Web: http://mg.hopto.org Cellular: +972 67 654037 TeleFax: +972 9 8852590 --=-B1VQDkL5Q+8nA2sVP6Ke Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 7bit Hi list. I just had just buy a m515 USB pda and trying to set it up for a Linux enviroment. After searching the google about 3-4 hours I found a J-Pilot a Gnome-pilot. I choosed gnome-pilot as it work well with my evolution. But is there any way to sync inbox emails from evloution to palm ? All my searches how to transfer any documents/emails/something other then contacts, datebook etc failed. I also tryed to find info but got nothing, is there a way to mount a palm as a filesystem ? For example as I mount my digital camera and copy pictures from there. I have installed multimedia programs on my handheld but there is no way to upload anything without a winapp... Any idias/tips/suggestions what can I do to make my palm more useful are very welcome. -- Best Regards. Stiven Andre(aka X-Kent) MG Founder. Contact info: E-Mail: [EMAIL PROTECTED] Web: http://mg.hopto.org Cellular: +972 67 654037 TeleFax: +972 9 8852590 --=-B1VQDkL5Q+8nA2sVP6Ke-- = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
Re: Palm m515 on Linux
--=-5XuPBC/XqH9PXPZ5/EDR Content-Type: text/plain Content-Transfer-Encoding: 7bit On Mon, 2003-07-14 at 18:59, Tim Tsahayev wrote: > On Monday 14 July 2003 03:06, Stiven Andre wrote: > > [skipped] > > > I also tryed to find info but got > > nothing, is there a way to mount a palm as a filesystem ? For example as > > I mount my digital camera and copy pictures from there. I have installed > > multimedia programs on my handheld but there is no way to upload > > anything without a winapp... > > What multimedia programs? You can't upload .pdb? pdb ? For ex. I have a movie player and a pictures viewer. But it have a windows uplication for uploading movies/pictures, so how do I add a content ? The same with documents/spreadsheets/mail that is critical for me... Any idias ? > > = > To unsubscribe, send mail to [EMAIL PROTECTED] with > the word "unsubscribe" in the message body, e.g., run the command > echo unsubscribe | mail [EMAIL PROTECTED] -- --=-5XuPBC/XqH9PXPZ5/EDR Content-Type: text/html; charset=utf-8 Content-Transfer-Encoding: 7bit On Mon, 2003-07-14 at 18:59, Tim Tsahayev wrote: On Monday 14 July 2003 03:06, Stiven Andre wrote: [skipped] > I also tryed to find info but got > nothing, is there a way to mount a palm as a filesystem ? For example as > I mount my digital camera and copy pictures from there. I have installed > multimedia programs on my handheld but there is no way to upload > anything without a winapp... What multimedia programs? You can't upload .pdb? pdb ? For ex. I have a movie player and a pictures viewer. But it have a windows uplication for uploading movies/pictures, so how do I add a content ? The same with documents/spreadsheets/mail that is critical for me... Any idias ? = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail mailto:[EMAIL PROTECTED]">[EMAIL PROTECTED] -- --=-5XuPBC/XqH9PXPZ5/EDR-- = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
sendsms, no versions send to orange ?
Hi list. I remember using the nice and easy sendsms script for sending sms to orange cellphones. I was about to set it up on my new machine and didn't find any working version. Bug? In version downloaded from: http://harel.org.il/nadav/software/sendsms/ When I am sending to orange it gives me: [[EMAIL PROTECTED] root]# ./sendsms "067 654037" "fff" "fff" [03/11/20 01:21] Sending to 067654037: fff (fff) Sorry, unrecognized cellphone number 067654037. Currently, recognized numbers must begin with: Cellcom: 052, 053, 058, 064, or 065 Orange: 054, 055, 066 or 067 Pelephone: 050, 051, 056 or 068 Amigo: 057 followed by exactly 6 digits. Spaces and hyphens are ignored. The same command with pelefone, but number is recognized. [[EMAIL PROTECTED] root]# ./sendsms "050 654037" "fff" "fff" [03/11/20 01:21] Sending to 050654037: fff (fff) ERROR: No ICQ SMS account defined in your ~/.sendsmsrc! Please see 'man sendsms' for instructions. [[EMAIL PROTECTED] root]# Every options give the same(without spaces, with – instead of space etc) ~/.sendsmsrc exists and edited properly I tried version from source forge: [[EMAIL PROTECTED] sendsms-3.1.2a]# ./sendsms -sYA -n067654037 fff Name "Text::Wrap::columns" used only once: possible typo at ./sendsms line 661. [03/11/20 01:25] Sending to 067654037: fff (YA) Unknown error sending message. [[EMAIL PROTECTED] sendsms-3.1.2a]# Any suggestions what can I use ? Best Regards. Stiven Andre(aka X-Kent) Contact info: E-Mail: [EMAIL PROTECTED] Web: http://www.iclabs.net Cellular: +972 (0)67 654037
[OT] to list admin, members please ignore
Hi. Sorry for annoying but I have problem unsubscribing my old email accounts from the list as I am unable to send unsubscribe command from those addresses. I have 3 email accounts 2 old and 1 active Old accounts: x-kent at host mg.hopto.org x-kent at host iclabs.net Active account: x-kent at host gon.co.il I am still receiving the mail for three accounts, but I can send only from gon.co.il account. Can you please unsubscribe mg.hopto.org and iclabs.net account? As I receive all messages 3 times. For authentication you can send unsubscribe confirming message to mg.hopto.org and iclabs.net accounts I will receive them but when I reply it would come from gon.co.il Again, sorry for annoying. Best Regards. Stiven Andre(aka X-Kent) GON System administration. Contact info: Skype: x-kent ICQ: 524215 E-Mail: [EMAIL PROTECTED] Web: http://gon.co.il/x-kent Cellular: +972-(0)67-654037
RE: [OT] to list admin, members please ignore
I don't want to make the list thinking I am trying to crack or something.. May be the software will recognize that it is not my real address and ban me. But if you say I will try to do it that way Best Regards. Stiven Andre(aka X-Kent) GON System administration. Contact info: Skype: x-kent ICQ: 524215 E-Mail: [EMAIL PROTECTED] Web: http://gon.co.il/x-kent Cellular: +972-(0)67-654037 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Shachar Shemesh Sent: Saturday, February 28, 2004 2:46 PM To: Stiven Andre Cc: Israeli Group Linux Users (IGLU) Subject: Re: [OT] to list admin, members please ignore Stiven Andre wrote: > Hi. > > Sorry for annoying but I have problem unsubscribing my old email > accounts from the list as I am unable to send unsubscribe command from > those addresses. > > I have 3 email accounts 2 old and 1 active > > Old accounts: > > x-kent at host mg.hopto.org <mailto:[EMAIL PROTECTED]> > > x-kent at host iclabs.net <mailto:[EMAIL PROTECTED]> > Why not just set the "from" of your outlook to these addresses and send the unsubscribe? If you can receive the mail sent there, that's all you need. > Active account: > > x-kent at host gon.co.il > > I am still receiving the mail for three accounts, but I can send only > from gon.co.il account. > > Can you please unsubscribe mg.hopto.org and iclabs.net account? As I > receive all messages 3 times. > > For authentication you can send unsubscribe confirming message to > mg.hopto.org and iclabs.net accounts I will receive them but when I > reply it would come from gon.co.il > > Again, sorry for annoying. > > > > > > Best Regards. > > Stiven Andre(aka X-Kent) > > GON System administration. > > Contact info: > > Skype: x-kent > > ICQ: 524215 > > E-Mail: [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> > > Web: http://gon.co.il/x-kent > > Cellular: +972-(0)67-654037 > > > > > -- Shachar Shemesh Lingnu Open Systems Consulting http://www.lingnu.com/ = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED] = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
Re: [OT] to list admin, members please ignore
On Sat, Feb 28, 2004 at 05:40:07PM +0200, Stiven Andre wrote: > > Shachar Shemesh Wrote: > > > Why not just set the "from" of your outlook to these addresses and send > > the unsubscribe? If you can receive the mail sent there, that's all you > > need. > > I don't want to make the list thinking I am trying to crack or > something.. What's wrong with changing the "From" header? = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
Linux supported notebook in israel ?
Hi list. Sorry to be a bit off topic. I am about to buy myself a new notebook. I remember hearing about some Linux supported notebooks by Compaq here in Israel. Is there any till now? Basically is there a place to go and buy a notebook that will have Linux drivers for all of it’s onboard devices? Or what I have is to use the web to check one by one notebook for it Linux support? Any advices about what notebook configuration and where to buy it is greatly welcome… (I never had a notebook before so I am unsure a bit what configuration to buy…) Best Regards. Stiven Andre(aka X-Kent) GON System administration. Contact info: Skype: x-kent ICQ: 524215 E-Mail: [EMAIL PROTECTED] Web: http://gon.co.il/x-kent Cellular: +972-(0)67-654037 -- GON mail server scanned this email for viruses and dangerous content. To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
samba-3.0.4-2 vs Win2003 Server as file server?
Hi list. I maintain a samba file server for a some company that uses it for sharing database files for their windows based administration program. Currently we experience many problems with a program named "Business Organizer" that based on MS access. The program often crashes with error messages. Tech support complain about disconnection with the database and poor network reliability and advice us to upgrade to win2003 server... I am a Linux ideologist(as we all) and would not believe in that solution but there always may be some trick as my samba configuration is very basic. Do anyone have any experience running samba in mission critical environment? Did you have it running smoothly without any disconnections? I always have this message repeated in /var/log/messages: Jul 20 10:14:29 linux smbd[31608]: register_message_flags: tdb_fetch failed Jul 20 10:15:28 linux smbd[31608]: [2004/07/20 10:15:28, 0] smbd/connection.c:register_message_flags(220) Asking google about it didn't give me any good... Anyway I don't believe that it may cause that crashes. Here is my smb.conf: [GLOBAL] workgroup = KARTING netbios name = smbserv server string = KARTING-SERVER guest account = nobody security = share printing = cups printcap name = cups #socket options = TCP_NODELAY SO_SNDBUF=8192 SO_RCVBUF=8192 [PUBLIC] comment = Public space path = /home/fileserv guest ok = yes guest only = yes read only = no create mask = 0664 directory mask = 0775 [printers] comment = Stylus Color 980 printer path = /var/spool/samba browseable = yes public = yes print command = lp -c -d%p -o raw; rm %s lpq command = lpstat -o %p lprm command = cancel %p %j print ok = yes use client driver = yes guest ok = yes I commented out that socket options as they don't seem to help. Printing is poorly configured but it is not critical at this point. The machine is p4 1.8 256ram. Running fedora core 1(samba is upgraded). For some reason, after upgrading samba to 3.0.4-2 with rpm -Uvh I don't have any samba logs in it logdir in /var/log/samba. smbd.log and nmbd.log seem to be created but they are empty. Can anyone give me some tips to fine tune samba as tomorrow we will have 2003server on another machine here for testing and the one that works better will stay. Should I say Linux should take that race? Best Regards Stiven Andre. PS: if anyone is really interested in that test feel free to contact me by phone 054-7654037-Stiven or ask me letter about test results by mail. -- GON mail server scanned this email for viruses and dangerous content. = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
focus site in Linux browser?
Hi list. Anyone knows why http://focus.msn.co.il/ doesn't work in any Linux browser? Should I install something to make it work or it's just incompatible :-(? Regards Stiven. -- GON mail server scanned this email for viruses and dangerous content. = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]
Re: focus site in Linux browser?
Yep, there are many sites that don't stand with standards but the question is, is there any way to read thoose sites on Linux box? I say it not becouse I agree with this standard violation but it's too annoying having to reboot to windows to check if there is a new car avilable for sale Any "end user" solution for this around? Regards. Stiven - Original Message - From: "Diego Iastrubni" <[EMAIL PROTECTED]> To: "Linux List" <[EMAIL PROTECTED]> Sent: Tuesday, October 19, 2004 8:12 PM Subject: Re: focus site in Linux browser? ביום שלישי, 19 באוקטובר 2004, 02:34, כתבת: > An included javascript file for the main page starts with: > > var xmlDoc = new ActiveXObject("Msxml2.DOMDocument"); > > and if it fails it has an alert saying that an accompanaying file was > not loaded. stupid ass holes who dont know how to code JavaScript... Is this code so hard to write? // load the xml if (window.ActiveXObject) xmlDoc = new ActiveXObject("Microsoft.XMLDOM"); else if (document.implementation && document.implementation.createDocument) xmlDoc=document.implementation.createDocument("","doc",null); else alert("Could not create an XMLDocument"); -- diego, kde-il translation team, http://www.kde.org/il Please avoid sending me Word or PowerPoint attachments. See http://www.fsf.org/philosophy/no-word-attachments.html To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED] -- GON mail server scanned this email for viruses and dangerous content. -- GON mail server scanned this email for viruses and dangerous content. = To unsubscribe, send mail to [EMAIL PROTECTED] with the word "unsubscribe" in the message body, e.g., run the command echo unsubscribe | mail [EMAIL PROTECTED]