[LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do not over write driver's read_page()/write_page()
Add check before assigning chip->ecc.read_page() and chip->ecc.write_page() Signed-off-by: Naga Sureshkumar Relli --- drivers/mtd/nand/raw/nand_micron.c | 7 +-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/nand/raw/nand_micron.c b/drivers/mtd/nand/raw/nand_micron.c index cbd4f09ac178..565f2696c747 100644 --- a/drivers/mtd/nand/raw/nand_micron.c +++ b/drivers/mtd/nand/raw/nand_micron.c @@ -500,8 +500,11 @@ static int micron_nand_init(struct nand_chip *chip) chip->ecc.size = 512; chip->ecc.strength = chip->base.eccreq.strength; chip->ecc.algo = NAND_ECC_BCH; - chip->ecc.read_page = micron_nand_read_page_on_die_ecc; - chip->ecc.write_page = micron_nand_write_page_on_die_ecc; + if (!chip->ecc.read_page) + chip->ecc.read_page = micron_nand_read_page_on_die_ecc; + + if (!chip->ecc.write_page) + chip->ecc.write_page = micron_nand_write_page_on_die_ecc; if (ondie == MICRON_ON_DIE_MANDATORY) { chip->ecc.read_page_raw = nand_read_page_raw_notsupp; -- 2.17.1
Re: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do not over write driver's read_page()/write_page()
On Tue, Jun 25, 2019 at 06:46:29AM +0200, Naga Sureshkumar Relli wrote: > --- a/drivers/mtd/nand/raw/nand_micron.c > +++ b/drivers/mtd/nand/raw/nand_micron.c > @@ -500,8 +500,11 @@ static int micron_nand_init(struct nand_chip *chip) > chip->ecc.size = 512; > chip->ecc.strength = chip->base.eccreq.strength; > chip->ecc.algo = NAND_ECC_BCH; > - chip->ecc.read_page = micron_nand_read_page_on_die_ecc; > - chip->ecc.write_page = micron_nand_write_page_on_die_ecc; > + if (!chip->ecc.read_page) > + chip->ecc.read_page = micron_nand_read_page_on_die_ecc; > + > + if (!chip->ecc.write_page) > + chip->ecc.write_page = > micron_nand_write_page_on_die_ecc; When used with pl353_nand.c, this change prioritizes the pl353_nand_read_page_raw/pl353_nand_write_page_raw implementations over micron_nand_read_page_on_die_ecc/micron_nand_write_page_on_die_ecc. The pl353 implementations don't check the status register of the flash for NAND_ECC_STATUS_WRITE_RECOMMENDED nor do they update ecc_stats.failed in any way. Unless I am mistaken, this implies that bitflips cannot be detected at all anymore. However, this is the change that makes a MT29F2G08ABAEAWP practically work with jffs2 on the Zynq platform. In this context, I countered a document from Micron[1] indicating that their on-die chips are incompatible with jffs2 as is, because the on-die oob layout is incompatible with jffs2. I suppose that using the raw variants puts jffs2 in full control of the oob area, but is this really the correct solution? Helmut [1] https://www.micron.com/~/media/Documents/Products/Technical%20Note/NAND%20Flash/tn2975_enable_on-die-ECC_NAND_JFFS2.pdf
Re: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do not over write driver's read_page()/write_page()
On Mon, 24 Jun 2019 22:46:29 -0600 Naga Sureshkumar Relli wrote: > Add check before assigning chip->ecc.read_page() and chip->ecc.write_page() > > Signed-off-by: Naga Sureshkumar Relli > --- > drivers/mtd/nand/raw/nand_micron.c | 7 +-- > 1 file changed, 5 insertions(+), 2 deletions(-) > > diff --git a/drivers/mtd/nand/raw/nand_micron.c > b/drivers/mtd/nand/raw/nand_micron.c > index cbd4f09ac178..565f2696c747 100644 > --- a/drivers/mtd/nand/raw/nand_micron.c > +++ b/drivers/mtd/nand/raw/nand_micron.c > @@ -500,8 +500,11 @@ static int micron_nand_init(struct nand_chip *chip) > chip->ecc.size = 512; > chip->ecc.strength = chip->base.eccreq.strength; > chip->ecc.algo = NAND_ECC_BCH; > - chip->ecc.read_page = micron_nand_read_page_on_die_ecc; > - chip->ecc.write_page = micron_nand_write_page_on_die_ecc; > + if (!chip->ecc.read_page) > + chip->ecc.read_page = micron_nand_read_page_on_die_ecc; > + > + if (!chip->ecc.write_page) > + chip->ecc.write_page = > micron_nand_write_page_on_die_ecc; That's wrong, if you don't want on-die ECC to be used, simply don't set nand-ecc-mode to "on-die". > > if (ondie == MICRON_ON_DIE_MANDATORY) { > chip->ecc.read_page_raw = nand_read_page_raw_notsupp;
RE: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do not over write driver's read_page()/write_page()
Hi Boris, > -Original Message- > From: Boris Brezillon > Sent: Wednesday, June 26, 2019 12:18 PM > To: Naga Sureshkumar Relli > Cc: miquel.ray...@bootlin.com; helmut.gro...@intenta.de; rich...@nod.at; > dw...@infradead.org; computersforpe...@gmail.com; marek.va...@gmail.com; > vigne...@ti.com; bbrezil...@kernel.org; yamada.masah...@socionext.com; linux- > m...@lists.infradead.org; linux-kernel@vger.kernel.org > Subject: Re: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do not over > write > driver's read_page()/write_page() > > On Mon, 24 Jun 2019 22:46:29 -0600 > Naga Sureshkumar Relli wrote: > > > Add check before assigning chip->ecc.read_page() and > > chip->ecc.write_page() > > > > Signed-off-by: Naga Sureshkumar Relli > > > > --- > > drivers/mtd/nand/raw/nand_micron.c | 7 +-- > > 1 file changed, 5 insertions(+), 2 deletions(-) > > > > diff --git a/drivers/mtd/nand/raw/nand_micron.c > > b/drivers/mtd/nand/raw/nand_micron.c > > index cbd4f09ac178..565f2696c747 100644 > > --- a/drivers/mtd/nand/raw/nand_micron.c > > +++ b/drivers/mtd/nand/raw/nand_micron.c > > @@ -500,8 +500,11 @@ static int micron_nand_init(struct nand_chip *chip) > > chip->ecc.size = 512; > > chip->ecc.strength = chip->base.eccreq.strength; > > chip->ecc.algo = NAND_ECC_BCH; > > - chip->ecc.read_page = micron_nand_read_page_on_die_ecc; > > - chip->ecc.write_page = micron_nand_write_page_on_die_ecc; > > + if (!chip->ecc.read_page) > > + chip->ecc.read_page = micron_nand_read_page_on_die_ecc; > > + > > + if (!chip->ecc.write_page) > > + chip->ecc.write_page = > > micron_nand_write_page_on_die_ecc; > > That's wrong, if you don't want on-die ECC to be used, simply don't set > nand-ecc-mode to "on- > die". Ok. But if we want to use on-die ECC then you mean to say it is mandatory to use micron_nand_read/write_page_on_die_ecc()? Regards, Naga Sureshkumar Relli > > > > > if (ondie == MICRON_ON_DIE_MANDATORY) { > > chip->ecc.read_page_raw = nand_read_page_raw_notsupp;
Re: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do not over write driver's read_page()/write_page()
On Wed, 26 Jun 2019 11:22:33 + Naga Sureshkumar Relli wrote: > Hi Boris, > > > -Original Message- > > From: Boris Brezillon > > Sent: Wednesday, June 26, 2019 12:18 PM > > To: Naga Sureshkumar Relli > > Cc: miquel.ray...@bootlin.com; helmut.gro...@intenta.de; rich...@nod.at; > > dw...@infradead.org; computersforpe...@gmail.com; marek.va...@gmail.com; > > vigne...@ti.com; bbrezil...@kernel.org; yamada.masah...@socionext.com; > > linux- > > m...@lists.infradead.org; linux-kernel@vger.kernel.org > > Subject: Re: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do not over > > write > > driver's read_page()/write_page() > > > > On Mon, 24 Jun 2019 22:46:29 -0600 > > Naga Sureshkumar Relli wrote: > > > > > Add check before assigning chip->ecc.read_page() and > > > chip->ecc.write_page() > > > > > > Signed-off-by: Naga Sureshkumar Relli > > > > > > --- > > > drivers/mtd/nand/raw/nand_micron.c | 7 +-- > > > 1 file changed, 5 insertions(+), 2 deletions(-) > > > > > > diff --git a/drivers/mtd/nand/raw/nand_micron.c > > > b/drivers/mtd/nand/raw/nand_micron.c > > > index cbd4f09ac178..565f2696c747 100644 > > > --- a/drivers/mtd/nand/raw/nand_micron.c > > > +++ b/drivers/mtd/nand/raw/nand_micron.c > > > @@ -500,8 +500,11 @@ static int micron_nand_init(struct nand_chip *chip) > > > chip->ecc.size = 512; > > > chip->ecc.strength = chip->base.eccreq.strength; > > > chip->ecc.algo = NAND_ECC_BCH; > > > - chip->ecc.read_page = micron_nand_read_page_on_die_ecc; > > > - chip->ecc.write_page = micron_nand_write_page_on_die_ecc; > > > + if (!chip->ecc.read_page) > > > + chip->ecc.read_page = micron_nand_read_page_on_die_ecc; > > > + > > > + if (!chip->ecc.write_page) > > > + chip->ecc.write_page = > > > micron_nand_write_page_on_die_ecc; > > > > That's wrong, if you don't want on-die ECC to be used, simply don't set > > nand-ecc-mode to "on- > > die". > Ok. But if we want to use on-die ECC then you mean to say it is mandatory to > use micron_nand_read/write_page_on_die_ecc()? Absolutely, and if it doesn't work that means you driver does not implement raw accesses correctly, which means it's still buggy...
RE: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do not over write driver's read_page()/write_page()
Hi Boris, > -Original Message- > From: Boris Brezillon > Sent: Wednesday, June 26, 2019 4:57 PM > To: Naga Sureshkumar Relli > Cc: miquel.ray...@bootlin.com; helmut.gro...@intenta.de; rich...@nod.at; > dw...@infradead.org; computersforpe...@gmail.com; marek.va...@gmail.com; > vigne...@ti.com; bbrezil...@kernel.org; yamada.masah...@socionext.com; linux- > m...@lists.infradead.org; linux-kernel@vger.kernel.org > Subject: Re: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do not over > write > driver's read_page()/write_page() > > On Wed, 26 Jun 2019 11:22:33 + > Naga Sureshkumar Relli wrote: > > > Hi Boris, > > > > > -Original Message- > > > From: Boris Brezillon > > > Sent: Wednesday, June 26, 2019 12:18 PM > > > To: Naga Sureshkumar Relli > > > Cc: miquel.ray...@bootlin.com; helmut.gro...@intenta.de; > > > rich...@nod.at; dw...@infradead.org; computersforpe...@gmail.com; > > > marek.va...@gmail.com; vigne...@ti.com; bbrezil...@kernel.org; > > > yamada.masah...@socionext.com; linux- m...@lists.infradead.org; > > > linux-kernel@vger.kernel.org > > > Subject: Re: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do not > > > over write driver's read_page()/write_page() > > > > > > On Mon, 24 Jun 2019 22:46:29 -0600 > > > Naga Sureshkumar Relli wrote: > > > > > > > Add check before assigning chip->ecc.read_page() and > > > > chip->ecc.write_page() > > > > > > > > Signed-off-by: Naga Sureshkumar Relli > > > > > > > > --- > > > > drivers/mtd/nand/raw/nand_micron.c | 7 +-- > > > > 1 file changed, 5 insertions(+), 2 deletions(-) > > > > > > > > diff --git a/drivers/mtd/nand/raw/nand_micron.c > > > > b/drivers/mtd/nand/raw/nand_micron.c > > > > index cbd4f09ac178..565f2696c747 100644 > > > > --- a/drivers/mtd/nand/raw/nand_micron.c > > > > +++ b/drivers/mtd/nand/raw/nand_micron.c > > > > @@ -500,8 +500,11 @@ static int micron_nand_init(struct nand_chip *chip) > > > > chip->ecc.size = 512; > > > > chip->ecc.strength = chip->base.eccreq.strength; > > > > chip->ecc.algo = NAND_ECC_BCH; > > > > - chip->ecc.read_page = micron_nand_read_page_on_die_ecc; > > > > - chip->ecc.write_page = > > > > micron_nand_write_page_on_die_ecc; > > > > + if (!chip->ecc.read_page) > > > > + chip->ecc.read_page = > > > > micron_nand_read_page_on_die_ecc; > > > > + > > > > + if (!chip->ecc.write_page) > > > > + chip->ecc.write_page = > > > > micron_nand_write_page_on_die_ecc; > > > > > > That's wrong, if you don't want on-die ECC to be used, simply don't > > > set nand-ecc-mode to "on- die". > > Ok. But if we want to use on-die ECC then you mean to say it is mandatory > > to use > micron_nand_read/write_page_on_die_ecc()? > > Absolutely, and if it doesn't work that means you driver does not > implement raw accesses correctly, which means it's still buggy... I agree. But let's say, if there is a limitation with the controller. Then it is must to have this check right? I mean, for pl353 controller, we must clear the CS during the data phase, hence we are splitting the Transfer in the pl353_read/write_page_raw(). + pl353_nand_read_data_op(chip, buf, mtd->writesize, false); + p = chip->oob_poi; + pl353_nand_read_data_op(chip, p, + (mtd->oobsize - + PL353_NAND_LAST_TRANSFER_LENGTH), false); + p += (mtd->oobsize - PL353_NAND_LAST_TRANSFER_LENGTH); + xnfc->dataphase_addrflags |= PL353_NAND_CLEAR_CS; + pl353_nand_read_data_op(chip, p, PL353_NAND_LAST_TRANSFER_LENGTH, + false); As the above sequence is needed even for raw access, PL353 is unable to use the on_die_page reads. Thanks, Naga Sureshkumar Relli
Re: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do not over write driver's read_page()/write_page()
On Wed, 26 Jun 2019 11:51:12 + Naga Sureshkumar Relli wrote: > Hi Boris, > > > -Original Message- > > From: Boris Brezillon > > Sent: Wednesday, June 26, 2019 4:57 PM > > To: Naga Sureshkumar Relli > > Cc: miquel.ray...@bootlin.com; helmut.gro...@intenta.de; rich...@nod.at; > > dw...@infradead.org; computersforpe...@gmail.com; marek.va...@gmail.com; > > vigne...@ti.com; bbrezil...@kernel.org; yamada.masah...@socionext.com; > > linux- > > m...@lists.infradead.org; linux-kernel@vger.kernel.org > > Subject: Re: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do not over > > write > > driver's read_page()/write_page() > > > > On Wed, 26 Jun 2019 11:22:33 + > > Naga Sureshkumar Relli wrote: > > > > > Hi Boris, > > > > > > > -Original Message- > > > > From: Boris Brezillon > > > > Sent: Wednesday, June 26, 2019 12:18 PM > > > > To: Naga Sureshkumar Relli > > > > Cc: miquel.ray...@bootlin.com; helmut.gro...@intenta.de; > > > > rich...@nod.at; dw...@infradead.org; computersforpe...@gmail.com; > > > > marek.va...@gmail.com; vigne...@ti.com; bbrezil...@kernel.org; > > > > yamada.masah...@socionext.com; linux- m...@lists.infradead.org; > > > > linux-kernel@vger.kernel.org > > > > Subject: Re: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do not > > > > over write driver's read_page()/write_page() > > > > > > > > On Mon, 24 Jun 2019 22:46:29 -0600 > > > > Naga Sureshkumar Relli wrote: > > > > > > > > > Add check before assigning chip->ecc.read_page() and > > > > > chip->ecc.write_page() > > > > > > > > > > Signed-off-by: Naga Sureshkumar Relli > > > > > > > > > > --- > > > > > drivers/mtd/nand/raw/nand_micron.c | 7 +-- > > > > > 1 file changed, 5 insertions(+), 2 deletions(-) > > > > > > > > > > diff --git a/drivers/mtd/nand/raw/nand_micron.c > > > > > b/drivers/mtd/nand/raw/nand_micron.c > > > > > index cbd4f09ac178..565f2696c747 100644 > > > > > --- a/drivers/mtd/nand/raw/nand_micron.c > > > > > +++ b/drivers/mtd/nand/raw/nand_micron.c > > > > > @@ -500,8 +500,11 @@ static int micron_nand_init(struct nand_chip > > > > > *chip) > > > > > chip->ecc.size = 512; > > > > > chip->ecc.strength = chip->base.eccreq.strength; > > > > > chip->ecc.algo = NAND_ECC_BCH; > > > > > - chip->ecc.read_page = micron_nand_read_page_on_die_ecc; > > > > > - chip->ecc.write_page = > > > > > micron_nand_write_page_on_die_ecc; > > > > > + if (!chip->ecc.read_page) > > > > > + chip->ecc.read_page = > > > > > micron_nand_read_page_on_die_ecc; > > > > > + > > > > > + if (!chip->ecc.write_page) > > > > > + chip->ecc.write_page = > > > > > micron_nand_write_page_on_die_ecc; > > > > > > > > That's wrong, if you don't want on-die ECC to be used, simply don't > > > > set nand-ecc-mode to "on- die". > > > Ok. But if we want to use on-die ECC then you mean to say it is mandatory > > > to use > > micron_nand_read/write_page_on_die_ecc()? > > > > Absolutely, and if it doesn't work that means you driver does not > > implement raw accesses correctly, which means it's still buggy... > I agree. But let's say, if there is a limitation with the controller. Then it > is must to have this check right? > I mean, for pl353 controller, we must clear the CS during the data phase, > hence we are splitting the > Transfer in the pl353_read/write_page_raw(). > + pl353_nand_read_data_op(chip, buf, mtd->writesize, false); > + p = chip->oob_poi; > + pl353_nand_read_data_op(chip, p, > + (mtd->oobsize - > + PL353_NAND_LAST_TRANSFER_LENGTH), false); > + p += (mtd->oobsize - PL353_NAND_LAST_TRANSFER_LENGTH); > + xnfc->dataphase_addrflags |= PL353_NAND_CLEAR_CS; > + pl353_nand_read_data_op(chip, p, PL353_NAND_LAST_TRANSFER_LENGTH, > + false); > As the above sequence is needed even for raw access, PL353 is unable to use > the on_die_page reads. This "de-assert CS on last access" logic should be done in the exec_op() implementation. I also wonder how that works for operations that don't have data cycles. Oh, BTW, most chips are CE-don't-care, which means you can assert/de-assert CS on each read_data_op() without any issues.
RE: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do not over write driver's read_page()/write_page()
Hi Boris, > -Original Message- > From: Boris Brezillon > Sent: Wednesday, June 26, 2019 5:34 PM > To: Naga Sureshkumar Relli > Cc: miquel.ray...@bootlin.com; helmut.gro...@intenta.de; rich...@nod.at; > dw...@infradead.org; computersforpe...@gmail.com; marek.va...@gmail.com; > vigne...@ti.com; bbrezil...@kernel.org; yamada.masah...@socionext.com; linux- > m...@lists.infradead.org; linux-kernel@vger.kernel.org > Subject: Re: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do not over > write > driver's read_page()/write_page() > > On Wed, 26 Jun 2019 11:51:12 + > Naga Sureshkumar Relli wrote: > > > Hi Boris, > > > > > -Original Message- > > > From: Boris Brezillon > > > Sent: Wednesday, June 26, 2019 4:57 PM > > > To: Naga Sureshkumar Relli > > > Cc: miquel.ray...@bootlin.com; helmut.gro...@intenta.de; > > > rich...@nod.at; dw...@infradead.org; computersforpe...@gmail.com; > > > marek.va...@gmail.com; vigne...@ti.com; bbrezil...@kernel.org; > > > yamada.masah...@socionext.com; linux- m...@lists.infradead.org; > > > linux-kernel@vger.kernel.org > > > Subject: Re: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do not > > > over write driver's read_page()/write_page() > > > > > > On Wed, 26 Jun 2019 11:22:33 + > > > Naga Sureshkumar Relli wrote: > > > > > > > Hi Boris, > > > > > > > > > -Original Message- > > > > > From: Boris Brezillon > > > > > Sent: Wednesday, June 26, 2019 12:18 PM > > > > > To: Naga Sureshkumar Relli > > > > > Cc: miquel.ray...@bootlin.com; helmut.gro...@intenta.de; > > > > > rich...@nod.at; dw...@infradead.org; > > > > > computersforpe...@gmail.com; marek.va...@gmail.com; > > > > > vigne...@ti.com; bbrezil...@kernel.org; > > > > > yamada.masah...@socionext.com; linux- m...@lists.infradead.org; > > > > > linux-kernel@vger.kernel.org > > > > > Subject: Re: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do > > > > > not over write driver's read_page()/write_page() > > > > > > > > > > On Mon, 24 Jun 2019 22:46:29 -0600 Naga Sureshkumar Relli > > > > > wrote: > > > > > > > > > > > Add check before assigning chip->ecc.read_page() and > > > > > > chip->ecc.write_page() > > > > > > > > > > > > Signed-off-by: Naga Sureshkumar Relli > > > > > > > > > > > > --- > > > > > > drivers/mtd/nand/raw/nand_micron.c | 7 +-- > > > > > > 1 file changed, 5 insertions(+), 2 deletions(-) > > > > > > > > > > > > diff --git a/drivers/mtd/nand/raw/nand_micron.c > > > > > > b/drivers/mtd/nand/raw/nand_micron.c > > > > > > index cbd4f09ac178..565f2696c747 100644 > > > > > > --- a/drivers/mtd/nand/raw/nand_micron.c > > > > > > +++ b/drivers/mtd/nand/raw/nand_micron.c > > > > > > @@ -500,8 +500,11 @@ static int micron_nand_init(struct nand_chip > > > > > > *chip) > > > > > > chip->ecc.size = 512; > > > > > > chip->ecc.strength = chip->base.eccreq.strength; > > > > > > chip->ecc.algo = NAND_ECC_BCH; > > > > > > - chip->ecc.read_page = micron_nand_read_page_on_die_ecc; > > > > > > - chip->ecc.write_page = > > > > > > micron_nand_write_page_on_die_ecc; > > > > > > + if (!chip->ecc.read_page) > > > > > > + chip->ecc.read_page = > > > > > > micron_nand_read_page_on_die_ecc; > > > > > > + > > > > > > + if (!chip->ecc.write_page) > > > > > > + chip->ecc.write_page = > > > > > > micron_nand_write_page_on_die_ecc; > > > > > > > > > > That's wrong, if you don't want on-die ECC to be used, simply > > > > > don't set nand-ecc-mode to "on- die". > > > > Ok. But if we want to use on-die ECC then you mean to say it is > > > > mandatory to use > > > micron_nand_read/write_page_on_die_ecc()? > > > > > > Absolutely, and if it doesn't work that means you driver does not > > > implement raw accesses correctly, which means it
Re: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do not over write driver's read_page()/write_page()
On Wed, 26 Jun 2019 12:12:47 + Naga Sureshkumar Relli wrote: > Hi Boris, > > > -Original Message- > > From: Boris Brezillon > > Sent: Wednesday, June 26, 2019 5:34 PM > > To: Naga Sureshkumar Relli > > Cc: miquel.ray...@bootlin.com; helmut.gro...@intenta.de; rich...@nod.at; > > dw...@infradead.org; computersforpe...@gmail.com; marek.va...@gmail.com; > > vigne...@ti.com; bbrezil...@kernel.org; yamada.masah...@socionext.com; > > linux- > > m...@lists.infradead.org; linux-kernel@vger.kernel.org > > Subject: Re: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do not over > > write > > driver's read_page()/write_page() > > > > On Wed, 26 Jun 2019 11:51:12 + > > Naga Sureshkumar Relli wrote: > > > > > Hi Boris, > > > > > > > -Original Message- > > > > From: Boris Brezillon > > > > Sent: Wednesday, June 26, 2019 4:57 PM > > > > To: Naga Sureshkumar Relli > > > > Cc: miquel.ray...@bootlin.com; helmut.gro...@intenta.de; > > > > rich...@nod.at; dw...@infradead.org; computersforpe...@gmail.com; > > > > marek.va...@gmail.com; vigne...@ti.com; bbrezil...@kernel.org; > > > > yamada.masah...@socionext.com; linux- m...@lists.infradead.org; > > > > linux-kernel@vger.kernel.org > > > > Subject: Re: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do not > > > > over write driver's read_page()/write_page() > > > > > > > > On Wed, 26 Jun 2019 11:22:33 + > > > > Naga Sureshkumar Relli wrote: > > > > > > > > > Hi Boris, > > > > > > > > > > > -Original Message- > > > > > > From: Boris Brezillon > > > > > > Sent: Wednesday, June 26, 2019 12:18 PM > > > > > > To: Naga Sureshkumar Relli > > > > > > Cc: miquel.ray...@bootlin.com; helmut.gro...@intenta.de; > > > > > > rich...@nod.at; dw...@infradead.org; > > > > > > computersforpe...@gmail.com; marek.va...@gmail.com; > > > > > > vigne...@ti.com; bbrezil...@kernel.org; > > > > > > yamada.masah...@socionext.com; linux- m...@lists.infradead.org; > > > > > > linux-kernel@vger.kernel.org > > > > > > Subject: Re: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do > > > > > > not over write driver's read_page()/write_page() > > > > > > > > > > > > On Mon, 24 Jun 2019 22:46:29 -0600 Naga Sureshkumar Relli > > > > > > wrote: > > > > > > > > > > > > > Add check before assigning chip->ecc.read_page() and > > > > > > > chip->ecc.write_page() > > > > > > > > > > > > > > Signed-off-by: Naga Sureshkumar Relli > > > > > > > > > > > > > > --- > > > > > > > drivers/mtd/nand/raw/nand_micron.c | 7 +-- > > > > > > > 1 file changed, 5 insertions(+), 2 deletions(-) > > > > > > > > > > > > > > diff --git a/drivers/mtd/nand/raw/nand_micron.c > > > > > > > b/drivers/mtd/nand/raw/nand_micron.c > > > > > > > index cbd4f09ac178..565f2696c747 100644 > > > > > > > --- a/drivers/mtd/nand/raw/nand_micron.c > > > > > > > +++ b/drivers/mtd/nand/raw/nand_micron.c > > > > > > > @@ -500,8 +500,11 @@ static int micron_nand_init(struct nand_chip > > > > > > > *chip) > > > > > > > chip->ecc.size = 512; > > > > > > > chip->ecc.strength = chip->base.eccreq.strength; > > > > > > > chip->ecc.algo = NAND_ECC_BCH; > > > > > > > - chip->ecc.read_page = micron_nand_read_page_on_die_ecc; > > > > > > > - chip->ecc.write_page = > > > > > > > micron_nand_write_page_on_die_ecc; > > > > > > > + if (!chip->ecc.read_page) > > > > > > > + chip->ecc.read_page = > > > > > > > micron_nand_read_page_on_die_ecc; > > > > > > > + > > > > > > > + if (!chip->ecc.write_page) > > > > > > > + chip->ecc.write_page = > > > > > > > micron_nand_write_page_on_die_ecc; > > > > > > > > > > > > That&
RE: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do not over write driver's read_page()/write_page()
Hi Boris, > -Original Message- > From: Boris Brezillon > Sent: Wednesday, June 26, 2019 5:50 PM > To: Naga Sureshkumar Relli > Cc: miquel.ray...@bootlin.com; helmut.gro...@intenta.de; rich...@nod.at; > dw...@infradead.org; computersforpe...@gmail.com; marek.va...@gmail.com; > vigne...@ti.com; bbrezil...@kernel.org; yamada.masah...@socionext.com; linux- > m...@lists.infradead.org; linux-kernel@vger.kernel.org > Subject: Re: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do not over > write > driver's read_page()/write_page() > > On Wed, 26 Jun 2019 12:12:47 + > Naga Sureshkumar Relli wrote: > > > Hi Boris, > > > > > -Original Message- > > > From: Boris Brezillon > > > Sent: Wednesday, June 26, 2019 5:34 PM > > > To: Naga Sureshkumar Relli > > > Cc: miquel.ray...@bootlin.com; helmut.gro...@intenta.de; > > > rich...@nod.at; dw...@infradead.org; computersforpe...@gmail.com; > > > marek.va...@gmail.com; vigne...@ti.com; bbrezil...@kernel.org; > > > yamada.masah...@socionext.com; linux- m...@lists.infradead.org; > > > linux-kernel@vger.kernel.org > > > Subject: Re: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do not > > > over write driver's read_page()/write_page() > > > > > > On Wed, 26 Jun 2019 11:51:12 + > > > Naga Sureshkumar Relli wrote: > > > > > > > Hi Boris, > > > > > > > > > -Original Message- > > > > > From: Boris Brezillon > > > > > Sent: Wednesday, June 26, 2019 4:57 PM > > > > > To: Naga Sureshkumar Relli > > > > > Cc: miquel.ray...@bootlin.com; helmut.gro...@intenta.de; > > > > > rich...@nod.at; dw...@infradead.org; > > > > > computersforpe...@gmail.com; marek.va...@gmail.com; > > > > > vigne...@ti.com; bbrezil...@kernel.org; > > > > > yamada.masah...@socionext.com; linux- m...@lists.infradead.org; > > > > > linux-kernel@vger.kernel.org > > > > > Subject: Re: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do > > > > > not over write driver's read_page()/write_page() > > > > > > > > > > On Wed, 26 Jun 2019 11:22:33 + Naga Sureshkumar Relli > > > > > wrote: > > > > > > > > > > > Hi Boris, > > > > > > > > > > > > > -Original Message----- > > > > > > > From: Boris Brezillon > > > > > > > Sent: Wednesday, June 26, 2019 12:18 PM > > > > > > > To: Naga Sureshkumar Relli > > > > > > > Cc: miquel.ray...@bootlin.com; helmut.gro...@intenta.de; > > > > > > > rich...@nod.at; dw...@infradead.org; > > > > > > > computersforpe...@gmail.com; marek.va...@gmail.com; > > > > > > > vigne...@ti.com; bbrezil...@kernel.org; > > > > > > > yamada.masah...@socionext.com; linux- > > > > > > > m...@lists.infradead.org; linux-kernel@vger.kernel.org > > > > > > > Subject: Re: [LINUX PATCH v17 1/2] mtd: rawnand: > > > > > > > nand_micron: Do not over write driver's > > > > > > > read_page()/write_page() > > > > > > > > > > > > > > On Mon, 24 Jun 2019 22:46:29 -0600 Naga Sureshkumar Relli > > > > > > > wrote: > > > > > > > > > > > > > > > Add check before assigning chip->ecc.read_page() and > > > > > > > > chip->ecc.write_page() > > > > > > > > > > > > > > > > Signed-off-by: Naga Sureshkumar Relli > > > > > > > > > > > > > > > > --- > > > > > > > > drivers/mtd/nand/raw/nand_micron.c | 7 +-- > > > > > > > > 1 file changed, 5 insertions(+), 2 deletions(-) > > > > > > > > > > > > > > > > diff --git a/drivers/mtd/nand/raw/nand_micron.c > > > > > > > > b/drivers/mtd/nand/raw/nand_micron.c > > > > > > > > index cbd4f09ac178..565f2696c747 100644 > > > > > > > > --- a/drivers/mtd/nand/raw/nand_micron.c > > > > > > > > +++ b/drivers/mtd/nand/raw/nand_micron.c > > > > > > > > @@ -500,8 +500,11 @@ static int micron_nand_init(struct > > > > > > > > nand_chip *chip) > > > > > > > > chip->ecc.si
RE: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do not over write driver's read_page()/write_page()
Hi Boris, > -Original Message- > From: linux-mtd On Behalf Of Naga > Sureshkumar > Relli > Sent: Wednesday, June 26, 2019 6:04 PM > To: Boris Brezillon > Cc: vigne...@ti.com; bbrezil...@kernel.org; helmut.gro...@intenta.de; > rich...@nod.at; > linux-kernel@vger.kernel.org; marek.va...@gmail.com; > yamada.masah...@socionext.com; > linux-...@lists.infradead.org; miquel.ray...@bootlin.com; > computersforpe...@gmail.com; > dw...@infradead.org > Subject: RE: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do not over > write > driver's read_page()/write_page() > > Hi Boris, > > > -Original Message- > > From: Boris Brezillon > > Sent: Wednesday, June 26, 2019 5:50 PM > > To: Naga Sureshkumar Relli > > Cc: miquel.ray...@bootlin.com; helmut.gro...@intenta.de; > > rich...@nod.at; dw...@infradead.org; computersforpe...@gmail.com; > > marek.va...@gmail.com; vigne...@ti.com; bbrezil...@kernel.org; > > yamada.masah...@socionext.com; linux- m...@lists.infradead.org; > > linux-kernel@vger.kernel.org > > Subject: Re: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do not > > over write driver's read_page()/write_page() > > > > On Wed, 26 Jun 2019 12:12:47 + > > Naga Sureshkumar Relli wrote: > > > > > Hi Boris, > > > > > > > -Original Message- > > > > From: Boris Brezillon > > > > Sent: Wednesday, June 26, 2019 5:34 PM > > > > To: Naga Sureshkumar Relli > > > > Cc: miquel.ray...@bootlin.com; helmut.gro...@intenta.de; > > > > rich...@nod.at; dw...@infradead.org; computersforpe...@gmail.com; > > > > marek.va...@gmail.com; vigne...@ti.com; bbrezil...@kernel.org; > > > > yamada.masah...@socionext.com; linux- m...@lists.infradead.org; > > > > linux-kernel@vger.kernel.org > > > > Subject: Re: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: Do > > > > not over write driver's read_page()/write_page() > > > > > > > > On Wed, 26 Jun 2019 11:51:12 + Naga Sureshkumar Relli > > > > wrote: > > > > > > > > > Hi Boris, > > > > > > > > > > > -Original Message- > > > > > > From: Boris Brezillon > > > > > > Sent: Wednesday, June 26, 2019 4:57 PM > > > > > > To: Naga Sureshkumar Relli > > > > > > Cc: miquel.ray...@bootlin.com; helmut.gro...@intenta.de; > > > > > > rich...@nod.at; dw...@infradead.org; > > > > > > computersforpe...@gmail.com; marek.va...@gmail.com; > > > > > > vigne...@ti.com; bbrezil...@kernel.org; > > > > > > yamada.masah...@socionext.com; linux- m...@lists.infradead.org; > > > > > > linux-kernel@vger.kernel.org > > > > > > Subject: Re: [LINUX PATCH v17 1/2] mtd: rawnand: nand_micron: > > > > > > Do not over write driver's read_page()/write_page() > > > > > > > > > > > > On Wed, 26 Jun 2019 11:22:33 + Naga Sureshkumar Relli > > > > > > wrote: > > > > > > > > > > > > > Hi Boris, > > > > > > > > > > > > > > > -Original Message- > > > > > > > > From: Boris Brezillon > > > > > > > > Sent: Wednesday, June 26, 2019 12:18 PM > > > > > > > > To: Naga Sureshkumar Relli > > > > > > > > Cc: miquel.ray...@bootlin.com; helmut.gro...@intenta.de; > > > > > > > > rich...@nod.at; dw...@infradead.org; > > > > > > > > computersforpe...@gmail.com; marek.va...@gmail.com; > > > > > > > > vigne...@ti.com; bbrezil...@kernel.org; > > > > > > > > yamada.masah...@socionext.com; linux- > > > > > > > > m...@lists.infradead.org; linux-kernel@vger.kernel.org > > > > > > > > Subject: Re: [LINUX PATCH v17 1/2] mtd: rawnand: > > > > > > > > nand_micron: Do not over write driver's > > > > > > > > read_page()/write_page() > > > > > > > > > > > > > > > > On Mon, 24 Jun 2019 22:46:29 -0600 Naga Sureshkumar Relli > > > > > > > > wrote: > > > > > > > > > > > > > > > > > Add check before assigning chip->ecc.read_page() and > > > > > > > > > chip->ecc.write_page() > >