Hi Martin,
On Fri, 25 Jan 2019 12:34:49 +0100
Martin Kepplinger wrote:
> From: Martin Kepplinger
>
> This adds support for explicitly switching the mmc's power on and off.
>
> Signed-off-by: Martin Kepplinger
> ---
>
> This is not my patch. It's taken from
> https://patchwork.kernel.org/patch/4365751/
> rebased and minimally changed; but we use this.
>
> Are there any objections to this?
>
> Robin, can I still add your Signed-off-by to this? Also, should I set you
> as the author?
It's old, but thanks for keeping me in the loop :)
>
> thanks,
>
> martin
>
> drivers/mmc/host/mxs-mmc.c | 31 +++
> 1 file changed, 23 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/mmc/host/mxs-mmc.c b/drivers/mmc/host/mxs-mmc.c
> index add1e70195ea..e3c19fabb723 100644
> --- a/drivers/mmc/host/mxs-mmc.c
> +++ b/drivers/mmc/host/mxs-mmc.c
> @@ -517,6 +517,26 @@ static void mxs_mmc_set_ios(struct mmc_host *mmc, struct
> mmc_ios *ios)
> else
> host->bus_width = 0;
>
> + if (ios->power_mode != host->power_mode) {
> + switch (ios->power_mode) {
> + case MMC_POWER_OFF:
> + if ((host->vmmc) && regulator_disable(host->vmmc)) {
> + dev_err(mmc_dev(host->mmc),
> + "Failed to disable vmmc regulator\n");
> + }
> + break;
> + case MMC_POWER_UP:
> + if ((host->vmmc) && regulator_enable(host->vmmc)) {
> + dev_err(mmc_dev(host->mmc),
> + "Failed to enable vmmc regulator\n");
> + }
> + break;
> + default:
> + break;
> + }
> + host->power_mode = ios->power_mode;
> + }
> +
A single check in the root contitional for the availability of vmmc
should suffice, so:
if (host->vmmc && ios->power_mode != host->power_mode) {
...
case MMC_POWER_XX:
if (regulator_xx(host->vmmc))
dev_err;
...
> if (ios->clock)
> mxs_ssp_set_clk_rate(&host->ssp, ios->clock);
> }
> @@ -613,16 +633,11 @@ static int mxs_mmc_probe(struct platform_device *pdev)
>
> host->mmc = mmc;
> host->sdio_irq_en = 0;
> + host->power_mode = MMC_POWER_OFF;
My patch added 'power_mode' and 'vmmc' to the drivers private struct
(which are missing in this email?)
>
> reg_vmmc = devm_regulator_get(&pdev->dev, "vmmc");
> - if (!IS_ERR(reg_vmmc)) {
> - ret = regulator_enable(reg_vmmc);
> - if (ret) {
> - dev_err(&pdev->dev,
> - "Failed to enable vmmc regulator: %d\n", ret);
> - goto out_mmc_free;
> - }
> - }
> + if (!IS_ERR(reg_vmmc))
> + host->vmmc = reg_vmmc;
what about mmc_regulator_get_supply(mmc)?
If we use that the vmmc will be made available under mmv->supply->vmmc
if probe was successfull instead of storing it in the drivers private
struct.
>
> ssp->clk = devm_clk_get(&pdev->dev, NULL);
> if (IS_ERR(ssp->clk)) {
Robin van der Gracht
