Re: [PATCH v1 1/2] phy: Add QMP phy based UFS phy support for sdm845
Hi Can,
On 3/21/2018 8:12 AM, c...@codeaurora.org wrote:
> On 2018-03-20 19:30, Can Guo wrote:
>> Add UFS PHY support to make SDM845 UFS work with common PHY framework.
>>
>> Signed-off-by: Can Guo
>> ---
>> drivers/phy/qualcomm/phy-qcom-qmp.c | 120
>> +++-
>> drivers/phy/qualcomm/phy-qcom-qmp.h | 8 +++
>> 2 files changed, 126 insertions(+), 2 deletions(-)
>>
[snip]
>> + /* true, if PCS block has a separate SW_RESET register */
>> + bool has_sw_rst;
>> };
>>
You should set this for qmp_v3_usb3_uniphy_cfg as well.
Please also mention dependency on my patches [1] and [2] in your cover letter
[1]
http://lists-archives.com/linux-kernel/29071659-dt-bindings-phy-qcom-qmp-update-bindings-for-sdm845.html
[2]
lists-archives.com/linux-kernel/29071660-phy-qcom-qmp-add-qmp-v3-usb3-uni-phy-support-for-sdm845.html
>> /**
>> @@ -636,6 +712,10 @@ static inline void qphy_clrbits(void __iomem
>> *base, u32 offset, u32 val)
>> "aux", "cfg_ahb", "ref", "com_aux",
>> };
>>
>> +static const char * const sdm845_ufs_phy_clk_l[] = {
>> + "ref_clk", "ref_aux_clk",
>> +};
>> +
>> /* list of resets */
>> static const char * const msm8996_pciephy_reset_l[] = {
>> "phy", "common", "cfg",
>> @@ -650,6 +730,10 @@ static inline void qphy_clrbits(void __iomem
>> *base, u32 offset, u32 val)
>> "vdda-phy", "vdda-pll",
>> };
>>
>> +static const char * const sdm845_phy_vreg_l[] = {
>> + "vdda-phy", "vdda-pll",
>> +};
>> +
>> static const struct qmp_phy_cfg msm8996_pciephy_cfg = {
>> .type = PHY_TYPE_PCIE,
>> .nlanes = 3,
>> @@ -679,6 +763,7 @@ static inline void qphy_clrbits(void __iomem
>> *base, u32 offset, u32 val)
>> .has_pwrdn_delay = true,
>> .pwrdn_delay_min = POWER_DOWN_DELAY_US_MIN,
>> .pwrdn_delay_max = POWER_DOWN_DELAY_US_MAX,
>> + .has_sw_rst = true,
>> };
>>
>> static const struct qmp_phy_cfg msm8996_usb3phy_cfg = {
>> @@ -704,6 +789,7 @@ static inline void qphy_clrbits(void __iomem
>> *base, u32 offset, u32 val)
>> .start_ctrl = SERDES_START | PCS_START,
>> .pwrdn_ctrl = SW_PWRDN,
>> .mask_pcs_ready = PHYSTATUS,
>> + .has_sw_rst = true,
>> };
>>
>> /* list of resets */
>> @@ -740,6 +826,7 @@ static inline void qphy_clrbits(void __iomem
>> *base, u32 offset, u32 val)
>> .has_pwrdn_delay = true,
>> .pwrdn_delay_min = 995, /* us */
>> .pwrdn_delay_max = 1005, /* us */
>> + .has_sw_rst = true,
>> };
>>
>> static const struct qmp_phy_cfg qmp_v3_usb3phy_cfg = {
>> @@ -772,6 +859,30 @@ static inline void qphy_clrbits(void __iomem
>> *base, u32 offset, u32 val)
>> .has_phy_dp_com_ctrl = true,
>> .tx_b_lane_offset = 0x400,
>> .rx_b_lane_offset = 0x400,
>> + .has_sw_rst = true,
>> +};
>> +
>> +static const struct qmp_phy_cfg sdm845_ufsphy_cfg = {
>> + .type = PHY_TYPE_UFS,
>> + .nlanes = 2,
>> +
>> + .serdes_tbl = sdm845_ufsphy_serdes_tbl,
>> + .serdes_tbl_num = ARRAY_SIZE(sdm845_ufsphy_serdes_tbl),
>> + .tx_tbl = sdm845_ufsphy_tx_tbl,
>> + .tx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_tx_tbl),
>> + .rx_tbl = sdm845_ufsphy_rx_tbl,
>> + .rx_tbl_num = ARRAY_SIZE(sdm845_ufsphy_rx_tbl),
>> + .pcs_tbl = sdm845_ufsphy_pcs_tbl,
>> + .pcs_tbl_num = ARRAY_SIZE(sdm845_ufsphy_pcs_tbl),
>> + .clk_list = sdm845_ufs_phy_clk_l,
>> + .num_clks = ARRAY_SIZE(sdm845_ufs_phy_clk_l),
>> + .vreg_list = sdm845_phy_vreg_l,
>> + .num_vregs = ARRAY_SIZE(sdm845_phy_vreg_l),
>> + .regs = sdm845_ufsphy_regs_layout,
>> +
>> + .start_ctrl = SERDES_START,
>> + .pwrdn_ctrl = SW_PWRDN,
>> + .mask_pcs_ready = PCS_READY,
>> };
>>
>> static void qcom_qmp_phy_configure(void __iomem *base,
>> @@ -998,7 +1109,8 @@ static int qcom_qmp_phy_init(struct phy *phy)
>> usleep_range(cfg->pwrdn_delay_min, cfg->pwrdn_delay_max);
>>
>> /* Pull PHY out of reset state */
>> - qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
>> + if (cfg->has_sw_rst)
>> + qphy_clrbits(pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
>> if (cfg->has_phy_dp_com_ctrl)
>> qphy_clrbits(dp_com, QPHY_V3_DP_COM_SW_RESET, SW_RESET);
>>
>> @@ -1036,7 +1148,8 @@ static int qcom_qmp_phy_exit(struct phy *phy)
>> clk_disable_unprepare(qphy->pipe_clk);
>>
>> /* PHY reset */
>> - qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
>> + if (cfg->has_sw_rst)
>> + qphy_setbits(qphy->pcs, cfg->regs[QPHY_SW_RESET], SW_RESET);
>>
>> /* stop SerDes and Phy-Coding-Sublayer */
>> qphy_clrbits(qphy->pcs, cfg->regs[QPHY_START_CTRL], cfg->start_ctrl);
>> @@ -1383,6 +1496,9 @@ int qcom_qmp_phy_create(struct device *dev,
>> struct device_node *np, int id)
>> }, {
>> .compatible
Re: [PATCH v1 1/2] phy: Add QMP phy based UFS phy support for sdm845
On 2018-03-20 19:30, Can Guo wrote:
Add UFS PHY support to make SDM845 UFS work with common PHY framework.
Signed-off-by: Can Guo
---
drivers/phy/qualcomm/phy-qcom-qmp.c | 120
+++-
drivers/phy/qualcomm/phy-qcom-qmp.h | 8 +++
2 files changed, 126 insertions(+), 2 deletions(-)
diff --git a/drivers/phy/qualcomm/phy-qcom-qmp.c
b/drivers/phy/qualcomm/phy-qcom-qmp.c
index 6470c5d..aeb2377 100644
--- a/drivers/phy/qualcomm/phy-qcom-qmp.c
+++ b/drivers/phy/qualcomm/phy-qcom-qmp.c
@@ -156,6 +156,11 @@ enum qphy_reg_layout {
[QPHY_PCS_LFPS_RXTERM_IRQ_STATUS] = 0x170,
};
+static const unsigned int sdm845_ufsphy_regs_layout[] = {
+ [QPHY_START_CTRL] = 0x00,
+ [QPHY_PCS_READY_STATUS] = 0x168,
+};
+
static const struct qmp_phy_init_tbl msm8996_pcie_serdes_tbl[] = {
QMP_PHY_INIT_CFG(QSERDES_COM_BIAS_EN_CLKBUFLR_EN, 0x1c),
QMP_PHY_INIT_CFG(QSERDES_COM_CLK_ENABLE1, 0x10),
@@ -490,6 +495,74 @@ enum qphy_reg_layout {
QMP_PHY_INIT_CFG(QPHY_V3_PCS_RXEQTRAINING_RUN_TIME, 0x13),
};
+static const struct qmp_phy_init_tbl sdm845_ufsphy_serdes_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYS_CLK_CTRL, 0x02),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_BG_TIMER, 0x0a),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_IVCO, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CMN_CONFIG, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SYSCLK_EN_SEL, 0xd5),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_RESETSM_CNTRL, 0x20),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CLK_SELECT, 0x30),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_HSCLK_SEL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP_EN, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_CTRL, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CORE_CLK_EN, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_SVS_MODE_CLK_SEL, 0x05),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL1, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_INITVAL2, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE0, 0x82),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE0, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE0, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE0, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE0, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE0, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE0, 0xda),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE0, 0x01),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE0, 0xff),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE0, 0x0c),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_DEC_START_MODE1, 0x98),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_CP_CTRL_MODE1, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_RCTRL_MODE1, 0x16),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_PLL_CCTRL_MODE1, 0x36),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN0_MODE1, 0x3f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_INTEGLOOP_GAIN1_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE1_MODE1, 0xc1),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE2_MODE1, 0x00),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP1_MODE1, 0x32),
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_LOCK_CMP2_MODE1, 0x0f),
+
+ /* Rate B */
+ QMP_PHY_INIT_CFG(QSERDES_V3_COM_VCO_TUNE_MAP, 0x44),
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_tx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_TX_LANE_MODE_1, 0x06),
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_rx_tbl[] = {
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_LVL, 0x24),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_CNTRL, 0x0f),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_SIGDET_DEGLITCH_CNTRL, 0x1e),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_INTERFACE_MODE, 0x40),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_FO_GAIN, 0x0b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_TERM_BW, 0x5b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL2, 0x06),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL3, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_RX_EQU_ADAPTOR_CNTRL4, 0x1d),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_HALF, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN_QUARTER, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SVS_SO_GAIN, 0x04),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_SO_SATURATION_AND_ENABLE, 0x4b),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_PI_CONTROLS, 0x81),
+ QMP_PHY_INIT_CFG(QSERDES_V3_RX_UCDR_FASTLOCK_COUNT_LOW, 0x80),
+};
+
+static const struct qmp_phy_init_tbl sdm845_ufsphy_pcs_tbl[] = {
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_POWER_DOWN_CONTROL, 0x01),
+ QMP_PHY_INIT_CFG(QPHY_V3_PCS_MULTI_LANE_CTRL1, 0x02),
+};
+
/* struct qmp_phy_cfg - per-PHY initialization config */
struct qmp_phy_cfg {
/* phy-type - PCIE/UFS/USB */
@@ -540,6 +613,9
