Re: intel8x0: no sound in 2.6.11 rc3 & 4 (fine with 2.6.10)
On Wed, 23 Feb 2005 14:31:20 -0500, Bill Davidsen <[EMAIL PROTECTED]> wrote: > [EMAIL PROTECTED] wrote: > > Hello > > > > I have read a post in lkml.org that states that the problem experienced in > > rc3 has gone (1). That is not the case for me. > > > > My audio device is > > > > :00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM > > (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) > > I have found that I had to Mute __both__ "Headphone Jack Sense" and > > "Line Jack Sense" in order to ear the audio in rc4. > > I keep seeing this advice, but what tool do you use to mute them? I > don't see anything like that in alsamixer, aumix, or any other program I > tried. I have a T41p with: Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01), which looks to the be the same as Ulisses' device. It works fine for me in 2.6.11-rc4 (has worked fine for a while, as well). I have both a "Headphone Jack Sense" and "Line Jack Sense" (both set to off) mixer entry in alsamixer. I'm not sure why you're not seeing these entries... Thanks, Nish - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: intel8x0: no sound in 2.6.11 rc3 & 4 (fine with 2.6.10)
[EMAIL PROTECTED] wrote: Hello I have read a post in lkml.org that states that the problem experienced in rc3 has gone (1). That is not the case for me. My audio device is :00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) Subsystem: IBM: Unknown device 0554 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- In 2.6.10 and in 2.6.11-rc3 & 4 the clock is set to 48khz. eg: intel8x0_measure_ac97_clock: measured 49502 usecs intel8x0: clocking to 48000 It uses an Analog Devices AD1981B I have put a tar file of the /proc/asound directory of 2.6.10 and 2.6.11-rc4 in http://pusa.uv.es/~ulisses/asound-intel8x0/ the tar files were done while playing pcm audio, (not being eard in rc4). I have found that I had to Mute __both__ "Headphone Jack Sense" and "Line Jack Sense" in order to ear the audio in rc4. I keep seeing this advice, but what tool do you use to mute them? I don't see anything like that in alsamixer, aumix, or any other program I tried. Please let me know if you need further info or you want a tester All this is on a IBM Thinkpad R51 - Type 2887 -AVG ASUS 1681 - same symptoms. -- -bill davidsen ([EMAIL PROTECTED]) "The secret to procrastination is to put things off until the last possible moment - but no longer" -me - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: intel8x0: no sound in 2.6.11 rc3 4 (fine with 2.6.10)
[EMAIL PROTECTED] wrote: Hello I have read a post in lkml.org that states that the problem experienced in rc3 has gone (1). That is not the case for me. My audio device is :00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) Subsystem: IBM: Unknown device 0554 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 0 Interrupt: pin B routed to IRQ 11 Region 0: I/O ports at 1c00 [size=256] Region 1: I/O ports at 18c0 [size=64] Region 2: Memory at d0100c00 (32-bit, non-prefetchable) [size=512] Region 3: Memory at d0100800 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- In 2.6.10 and in 2.6.11-rc3 4 the clock is set to 48khz. eg: intel8x0_measure_ac97_clock: measured 49502 usecs intel8x0: clocking to 48000 It uses an Analog Devices AD1981B I have put a tar file of the /proc/asound directory of 2.6.10 and 2.6.11-rc4 in http://pusa.uv.es/~ulisses/asound-intel8x0/ the tar files were done while playing pcm audio, (not being eard in rc4). I have found that I had to Mute __both__ Headphone Jack Sense and Line Jack Sense in order to ear the audio in rc4. I keep seeing this advice, but what tool do you use to mute them? I don't see anything like that in alsamixer, aumix, or any other program I tried. Please let me know if you need further info or you want a tester All this is on a IBM Thinkpad R51 - Type 2887 -AVG ASUS 1681 - same symptoms. -- -bill davidsen ([EMAIL PROTECTED]) The secret to procrastination is to put things off until the last possible moment - but no longer -me - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: intel8x0: no sound in 2.6.11 rc3 4 (fine with 2.6.10)
On Wed, 23 Feb 2005 14:31:20 -0500, Bill Davidsen [EMAIL PROTECTED] wrote: [EMAIL PROTECTED] wrote: Hello I have read a post in lkml.org that states that the problem experienced in rc3 has gone (1). That is not the case for me. My audio device is :00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) snip I have found that I had to Mute __both__ Headphone Jack Sense and Line Jack Sense in order to ear the audio in rc4. I keep seeing this advice, but what tool do you use to mute them? I don't see anything like that in alsamixer, aumix, or any other program I tried. I have a T41p with: Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01), which looks to the be the same as Ulisses' device. It works fine for me in 2.6.11-rc4 (has worked fine for a while, as well). I have both a Headphone Jack Sense and Line Jack Sense (both set to off) mixer entry in alsamixer. I'm not sure why you're not seeing these entries... Thanks, Nish - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: intel8x0: no sound in 2.6.11 rc3 & 4 (fine with 2.6.10)
At Sat, 19 Feb 2005 13:11:57 +0100, [EMAIL PROTECTED] wrote: > > Hello > > I have read a post in lkml.org that states that the problem experienced in > rc3 has gone (1). That is not the case for me. > > My audio device is > > :00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM > (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) > Subsystem: IBM: Unknown device 0554 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 0 > Interrupt: pin B routed to IRQ 11 > Region 0: I/O ports at 1c00 [size=256] > Region 1: I/O ports at 18c0 [size=64] > Region 2: Memory at d0100c00 (32-bit, non-prefetchable) [size=512] > Region 3: Memory at d0100800 (32-bit, non-prefetchable) [size=256] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > In 2.6.10 and in 2.6.11-rc3 & 4 the clock is set to 48khz. > > eg: > > intel8x0_measure_ac97_clock: measured 49502 usecs > intel8x0: clocking to 48000 > > It uses an Analog Devices AD1981B > > I have put a tar file of the /proc/asound directory of 2.6.10 and 2.6.11-rc4 > in > > http://pusa.uv.es/~ulisses/asound-intel8x0/ > > the tar files were done while playing pcm audio, (not being eard in rc4). > > I have found that I had to Mute __both__ "Headphone Jack Sense" and > "Line Jack Sense" in order to ear the audio in rc4. Yes, that's correct -> Problem solved? The patch to correct these states as default wasn't merged to 2.6.11. Takashi - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: intel8x0: no sound in 2.6.11 rc3 4 (fine with 2.6.10)
At Sat, 19 Feb 2005 13:11:57 +0100, [EMAIL PROTECTED] wrote: Hello I have read a post in lkml.org that states that the problem experienced in rc3 has gone (1). That is not the case for me. My audio device is :00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) Subsystem: IBM: Unknown device 0554 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 0 Interrupt: pin B routed to IRQ 11 Region 0: I/O ports at 1c00 [size=256] Region 1: I/O ports at 18c0 [size=64] Region 2: Memory at d0100c00 (32-bit, non-prefetchable) [size=512] Region 3: Memory at d0100800 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- In 2.6.10 and in 2.6.11-rc3 4 the clock is set to 48khz. eg: intel8x0_measure_ac97_clock: measured 49502 usecs intel8x0: clocking to 48000 It uses an Analog Devices AD1981B I have put a tar file of the /proc/asound directory of 2.6.10 and 2.6.11-rc4 in http://pusa.uv.es/~ulisses/asound-intel8x0/ the tar files were done while playing pcm audio, (not being eard in rc4). I have found that I had to Mute __both__ Headphone Jack Sense and Line Jack Sense in order to ear the audio in rc4. Yes, that's correct - Problem solved? The patch to correct these states as default wasn't merged to 2.6.11. Takashi - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: intel8x0: no sound in 2.6.11 rc3 & 4 (fine with 2.6.10)
Please cc: alsa-devel when reporting ALSA issues. Lee On Sat, 2005-02-19 at 13:11 +0100, [EMAIL PROTECTED] wrote: > Hello > > I have read a post in lkml.org that states that the problem experienced in > rc3 has gone (1). That is not the case for me. > > My audio device is > > :00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM > (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) > Subsystem: IBM: Unknown device 0554 > Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- > Stepping- SERR- FastB2B- > Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- > SERR- Latency: 0 > Interrupt: pin B routed to IRQ 11 > Region 0: I/O ports at 1c00 [size=256] > Region 1: I/O ports at 18c0 [size=64] > Region 2: Memory at d0100c00 (32-bit, non-prefetchable) [size=512] > Region 3: Memory at d0100800 (32-bit, non-prefetchable) [size=256] > Capabilities: [50] Power Management version 2 > Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA > PME(D0+,D1-,D2-,D3hot+,D3cold+) > Status: D0 PME-Enable- DSel=0 DScale=0 PME- > > In 2.6.10 and in 2.6.11-rc3 & 4 the clock is set to 48khz. > > eg: > > intel8x0_measure_ac97_clock: measured 49502 usecs > intel8x0: clocking to 48000 > > It uses an Analog Devices AD1981B > > I have put a tar file of the /proc/asound directory of 2.6.10 and 2.6.11-rc4 > in > > http://pusa.uv.es/~ulisses/asound-intel8x0/ > > the tar files were done while playing pcm audio, (not being eard in rc4). > > I have found that I had to Mute __both__ "Headphone Jack Sense" and > "Line Jack Sense" in order to ear the audio in rc4. > > Please let me know if you need further info or you want a tester > > All this is on a IBM Thinkpad R51 - Type 2887 -AVG > > (tot toc: IBM, we're buying your laptops too) > > Thanks in advance > > Ulisses > > (1) http://lkml.org/lkml/2005/2/18/93 > - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
intel8x0: no sound in 2.6.11 rc3 & 4 (fine with 2.6.10)
Hello I have read a post in lkml.org that states that the problem experienced in rc3 has gone (1). That is not the case for me. My audio device is :00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) Subsystem: IBM: Unknown device 0554 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- SERR- http://pusa.uv.es/~ulisses/asound-intel8x0/ the tar files were done while playing pcm audio, (not being eard in rc4). I have found that I had to Mute __both__ "Headphone Jack Sense" and "Line Jack Sense" in order to ear the audio in rc4. Please let me know if you need further info or you want a tester All this is on a IBM Thinkpad R51 - Type 2887 -AVG (tot toc: IBM, we're buying your laptops too) Thanks in advance Ulisses (1) http://lkml.org/lkml/2005/2/18/93 -- Debian GNU/Linux: a dream come true - "Computers are useless. They can only give answers."Pablo Picasso "Debugging is twice as hard as writing the code in the first place. Therefore, if you write the code as cleverly as possible, you are, by definition, not smart enough to debug it." - Brian W. Kernighan - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
intel8x0: no sound in 2.6.11 rc3 4 (fine with 2.6.10)
Hello I have read a post in lkml.org that states that the problem experienced in rc3 has gone (1). That is not the case for me. My audio device is :00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) Subsystem: IBM: Unknown device 0554 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 0 Interrupt: pin B routed to IRQ 11 Region 0: I/O ports at 1c00 [size=256] Region 1: I/O ports at 18c0 [size=64] Region 2: Memory at d0100c00 (32-bit, non-prefetchable) [size=512] Region 3: Memory at d0100800 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- In 2.6.10 and in 2.6.11-rc3 4 the clock is set to 48khz. eg: intel8x0_measure_ac97_clock: measured 49502 usecs intel8x0: clocking to 48000 It uses an Analog Devices AD1981B I have put a tar file of the /proc/asound directory of 2.6.10 and 2.6.11-rc4 in http://pusa.uv.es/~ulisses/asound-intel8x0/ the tar files were done while playing pcm audio, (not being eard in rc4). I have found that I had to Mute __both__ Headphone Jack Sense and Line Jack Sense in order to ear the audio in rc4. Please let me know if you need further info or you want a tester All this is on a IBM Thinkpad R51 - Type 2887 -AVG (tot toc: IBM, we're buying your laptops too) Thanks in advance Ulisses (1) http://lkml.org/lkml/2005/2/18/93 -- Debian GNU/Linux: a dream come true - Computers are useless. They can only give answers.Pablo Picasso Debugging is twice as hard as writing the code in the first place. Therefore, if you write the code as cleverly as possible, you are, by definition, not smart enough to debug it. - Brian W. Kernighan - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
Re: intel8x0: no sound in 2.6.11 rc3 4 (fine with 2.6.10)
Please cc: alsa-devel when reporting ALSA issues. Lee On Sat, 2005-02-19 at 13:11 +0100, [EMAIL PROTECTED] wrote: Hello I have read a post in lkml.org that states that the problem experienced in rc3 has gone (1). That is not the case for me. My audio device is :00:1f.5 Multimedia audio controller: Intel Corp. 82801DB/DBL/DBM (ICH4/ICH4-L/ICH4-M) AC'97 Audio Controller (rev 01) Subsystem: IBM: Unknown device 0554 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 0 Interrupt: pin B routed to IRQ 11 Region 0: I/O ports at 1c00 [size=256] Region 1: I/O ports at 18c0 [size=64] Region 2: Memory at d0100c00 (32-bit, non-prefetchable) [size=512] Region 3: Memory at d0100800 (32-bit, non-prefetchable) [size=256] Capabilities: [50] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA PME(D0+,D1-,D2-,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- In 2.6.10 and in 2.6.11-rc3 4 the clock is set to 48khz. eg: intel8x0_measure_ac97_clock: measured 49502 usecs intel8x0: clocking to 48000 It uses an Analog Devices AD1981B I have put a tar file of the /proc/asound directory of 2.6.10 and 2.6.11-rc4 in http://pusa.uv.es/~ulisses/asound-intel8x0/ the tar files were done while playing pcm audio, (not being eard in rc4). I have found that I had to Mute __both__ Headphone Jack Sense and Line Jack Sense in order to ear the audio in rc4. Please let me know if you need further info or you want a tester All this is on a IBM Thinkpad R51 - Type 2887 -AVG (tot toc: IBM, we're buying your laptops too) Thanks in advance Ulisses (1) http://lkml.org/lkml/2005/2/18/93 - To unsubscribe from this list: send the line unsubscribe linux-kernel in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
