Twinhan DST stops working under latest v4l-dvb
It seems the latest v4l-dvb causes issues with my Twinhan 1020 bttv: driver version 0.9.17 loaded bttv: using 8 buffers with 2080k (520 pages) each for capture bttv: Bt8xx card found (0). ACPI: PCI Interrupt :05:08.0[A] - Link [APC3] - GSI 18 (level, low) - IRQ 18 bttv0: Bt878 (rev 17) at :05:08.0, irq: 18, latency: 32, mmio: 0xcb00 bttv0: using: Twinhan DST + clones [card=113,insmod option] bttv0: gpio: en=, out= in=00fefffe [init] bttv0: tuner absent bttv0: add subdevice dvb0 bt878: AUDIO driver version 0.0.0 loaded dvb_bt8xx: unable to determine DMA core of card 0, dvb_bt8xx: if you have the ALSA bt87x audio driver installed, try removing it. dvb-bt8xx: probe of dvb0 failed with error -14 i tried unloading all the sound modules made no difference (even though i didnt have the bt87x module loaded) This card works on earlier kernel modules. Any ideas? -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: kernel soft lockup on boot loading cx2388x based DVB-S card (TeVii S420)
Mauro, Thanks for the speedy patch! My system can at least boot now, but has issues loading the frontend. Linux video capture interface: v2.00 cx88/0: cx2388x v4l2 driver version 0.0.6 loaded ACPI: PCI Interrupt :05:08.0[A] - Link [APC3] - GSI 18 (level, low) - IRQ 18 cx88[0]: subsystem: d420:9022, board: TeVii S420 DVB-S [card=73,autodetected], frontend(s): 1 cx88[0]: TV tuner type -1, Radio tuner type -1 cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded tuner' 2-0068: chip found @ 0xd0 (cx88[0]) cx88[0]/0: found at :05:08.0, rev: 5, irq: 18, latency: 32, mmio: 0xd800 cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 tuner' 2-0068: tuner type not set cx88[0]/2: cx2388x 8802 Driver Manager ACPI: PCI Interrupt :05:08.2[A] - Link [APC3] - GSI 18 (level, low) - IRQ 18 cx88[0]/2: found at :05:08.2, rev: 5, irq: 18, latency: 32, mmio: 0xd900 ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22 ACPI: PCI Interrupt :00:04.0[A] - Link [APCJ] - GSI 22 (level, low) - IRQ 17 PCI: Setting latency timer of device :00:04.0 to 64 cx88/2: cx2388x dvb driver version 0.0.6 loaded cx88/2: registering cx8802 driver, type: dvb access: shared cx88[0]/2: subsystem: d420:9022, board: TeVii S420 DVB-S [card=73] cx88[0]/2: cx2388x based DVB/ATSC card cx8802_alloc_frontends() allocating 1 frontend(s) DVB: Unable to find symbol stv0299_attach() DVB: Unable to find symbol stv0288_attach() cx88[0]/2: frontend initialization failed cx88[0]/2: dvb_register failed (err = -22) cx88[0]/2: cx8802 probe failed, err = -22 thanks Aaron On 16/01/2009 2:55 AM, Mauro Carvalho Chehab wrote: On Thu, 15 Jan 2009 11:25:38 + Alec Christie alec.chris...@gmail.com wrote: I am getting the same with the Haupauge HVR-4000 after a recent Kernel Upgrade in Ubuntu Hardy (8.04). Any help greatly appreciated. Alec Christie 2009/1/15 Aaron Theodore aa...@bat.id.au Hi I'm running Debian with kernel: 2.6.24-etchnhalf.1-686 I recently baught a TeVii S420 DVB-S card and have been tring to get it to work. Firstly i built the v4l from: http://linuxtv.org/hg/v4l-dvb (hg clone) as the card was not detected. On first reboot after new modules are installed i get a kernel soft lockup cx88[0]/2: cx2388x based DVB/ATSC card BUG: soft lockup - CPU#0 stuck for 11s! [modprobe:1767] I just merged on http://linuxtv.org/hg/v4l-dvb a patch for fixing this bug. Please test. Cheers, Mauro -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: kernel soft lockup on boot loading cx2388x based DVB-S card (TeVii S420)
I tried: make rmmod make rminstall Although there were still some drivers left over from tevii_linuxdriver_0815 /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/dvb-usb/dvb-usb-s600.ko /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/dvb-usb/dvb-usb-s650.ko /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/zr36067.ko /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/zr36060.ko /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/zr36050.ko /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/saa7134/saa7134-oss.ko /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/zr36016.ko /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/tuner-3036.ko /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/videocodec.ko /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/dpc7146.ko so i just removed manually and rebooted. Same issue occurred on reboot. So i thought to try manually unloading and reloading the module barry:~# rmmod cx8802 barry:~# modprobe cx8802 kernel: cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded kernel: cx88[0]/2: cx2388x 8802 Driver Manager kernel: ACPI: PCI Interrupt :05:08.2[A] - Link [APC3] - GSI 18 (level, low) - IRQ 18 kernel: cx88[0]/2: found at :05:08.2, rev: 5, irq: 18, latency: 32, mmio: 0xd900 kernel: cx88/2: cx2388x dvb driver version 0.0.6 loaded kernel: cx88/2: registering cx8802 driver, type: dvb access: shared kernel: cx88[0]/2: subsystem: d420:9022, board: TeVii S420 DVB-S [card=73] kernel: cx88[0]/2: cx2388x based DVB/ATSC card kernel: cx8802_alloc_frontends() allocating 1 frontend(s) kernel: DVB: registering new adapter (cx88[0]) kernel: DVB: registering adapter 2 frontend 0 (ST STV0288 DVB-S)... This time it makes the devices in /dev/dvb/ Now unfortunately i can't test to see if it can actually Tune until a few hours time when i get home (i think i forgot to plug my satellite cable back in!) Will report back later Can i change the load order of kernel modules, it dosnt seem to like being loaded before my other dvb modules Aaron - Mauro Carvalho Chehab mche...@infradead.org wrote: On Fri, 16 Jan 2009 06:56:05 +1100 Aaron Theodore aa...@bat.id.au wrote: Mauro, Thanks for the speedy patch! You should thanks to Andy. He is the author of this patch ;) My system can at least boot now, but has issues loading the frontend. DVB: Unable to find symbol stv0299_attach() DVB: Unable to find symbol stv0288_attach() It seems that you didn't compile those two frontends. Cheers, Mauro -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: kernel soft lockup on boot loading cx2388x based DVB-S card (TeVii S420)
Horay my TeVii DVB-S S420 is now working, only thing now is to work out why it wont load on boot before my DVB-T card On 16/01/2009 3:19 PM, Aaron Theodore wrote: I tried: make rmmod make rminstall Although there were still some drivers left over from tevii_linuxdriver_0815 /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/dvb-usb/dvb-usb-s600.ko /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/dvb-usb/dvb-usb-s650.ko /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/zr36067.ko /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/zr36060.ko /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/zr36050.ko /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/saa7134/saa7134-oss.ko /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/zr36016.ko /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/tuner-3036.ko /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/videocodec.ko /lib/modules/2.6.24-etchnhalf.1-686/kernel/drivers/media/video/dpc7146.ko so i just removed manually and rebooted. Same issue occurred on reboot. So i thought to try manually unloading and reloading the module barry:~# rmmod cx8802 barry:~# modprobe cx8802 kernel: cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.6 loaded kernel: cx88[0]/2: cx2388x 8802 Driver Manager kernel: ACPI: PCI Interrupt :05:08.2[A] - Link [APC3] - GSI 18 (level, low) - IRQ 18 kernel: cx88[0]/2: found at :05:08.2, rev: 5, irq: 18, latency: 32, mmio: 0xd900 kernel: cx88/2: cx2388x dvb driver version 0.0.6 loaded kernel: cx88/2: registering cx8802 driver, type: dvb access: shared kernel: cx88[0]/2: subsystem: d420:9022, board: TeVii S420 DVB-S [card=73] kernel: cx88[0]/2: cx2388x based DVB/ATSC card kernel: cx8802_alloc_frontends() allocating 1 frontend(s) kernel: DVB: registering new adapter (cx88[0]) kernel: DVB: registering adapter 2 frontend 0 (ST STV0288 DVB-S)... This time it makes the devices in /dev/dvb/ Now unfortunately i can't test to see if it can actually Tune until a few hours time when i get home (i think i forgot to plug my satellite cable back in!) Will report back later Can i change the load order of kernel modules, it dosnt seem to like being loaded before my other dvb modules Aaron - Mauro Carvalho Chehab mche...@infradead.org wrote: On Fri, 16 Jan 2009 06:56:05 +1100 Aaron Theodore aa...@bat.id.au wrote: Mauro, Thanks for the speedy patch! You should thanks to Andy. He is the author of this patch ;) My system can at least boot now, but has issues loading the frontend. DVB: Unable to find symbol stv0299_attach() DVB: Unable to find symbol stv0288_attach() It seems that you didn't compile those two frontends. Cheers, Mauro -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line unsubscribe linux-media in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
