Subject is wrong, this has nothing to do with ARM. Should be USB.
On Sat, 05 Jul 2014, Peter Griffin wrote:
This patch documents the device tree documentation required for
the ST usb3 controller glue layer found in STiH407 devices.
Signed-off-by: Giuseppe Cavallaro peppe.cavall...@st.com
Signed-off-by: Peter Griffin peter.grif...@linaro.org
---
Documentation/devicetree/bindings/usb/dwc3-st.txt | 58
+++
1 file changed, 58 insertions(+)
create mode 100644 Documentation/devicetree/bindings/usb/dwc3-st.txt
diff --git a/Documentation/devicetree/bindings/usb/dwc3-st.txt
b/Documentation/devicetree/bindings/usb/dwc3-st.txt
new file mode 100644
index 000..befd964
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/dwc3-st.txt
@@ -0,0 +1,58 @@
+ST DWC3 glue logic
+
+This file documents the parameters for the dwc3-st driver.
Does this line really add anything to do the document, considering the
name and location of the file and the title above?
+This driver provides the glue logic to use the dwc3 on STiH407 based
platforms.
s/This driver/The DWC2 driver/
+Required properties:
+ - compatible: must be st,stih407-dwc3
+ - reg : glue logic base address and USB syscfg ctrl register
offset
+ - reg-names : should be reg-glue and syscfg-reg
Any reason why you have reg-* and *-reg? If you have to put 'reg' in
the name, it's usually appended, rather than prefixed.
+ - st,syscon : should be phandle to system configuration node which
+ encompasses the glue registers
+ - resets: phandle pointing to the system powerdown controller
+See: Documentation/devicetree/bindings/reset/st,sti-powerdown.txt
+See: Documentation/devicetree/bindings/reset/reset.txt
+
+ - #address-cells, #size-cells : should be '1' if the device has sub-nodes
+ with 'reg' property
+
+ - pinctl-names : A pinctrl state named default must be defined
+See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+
+ - pinctrl-0 : Pin control group
+See: Documentation/devicetree/bindings/pinctrl/pinctrl-binding.txt
+
+ - ranges: allows valid 1:1 translation between child's address space and
+ parent's address space
+
+Optional properties:
+ - st,dwc3-drd-device: to program the HC as device (static setup)
This will require a DT Ack.
+Sub-nodes:
+The dwc3 core should be added as subnode to ST DWC3 glue as shown in the
+example below. The DT binding details of dwc3 can be found in:
+Documentation/devicetree/bindings/usb/dwc3.txt
+
+Example:
+
+st_dwc3: dwc3@8f94000 {
+ status = disabled;
Probably not good to disable the node in the example.
+ compatible = st,stih407-dwc3;
+ reg = 0x08f94000 0x1000, 0x110 0x4;
+ reg-names = reg-glue, syscfg-reg;
+ st,syscfg = syscfg_core;
+ resets = powerdown STIH407_USB3_POWERDOWN;
+ #address-cells = 1;
+ #size-cells = 1;
+ pinctrl-names = default;
+ pinctrl-0 = pinctrl_usb3;
+ ranges;
+
+ dwc3: dwc3@990 {
+ compatible = synopsys,dwc3;
+ reg = 0x0990 0x10;
+ interrupts = GIC_SPI 155 IRQ_TYPE_NONE;
+
+ usb-phy = usb2_phy, usb3_phy;
+ };
+};
--
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line unsubscribe linux-omap in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
