On Mon, Jan 29, 2018 at 04:45:43PM +0100, Ulrich Hecht wrote:
> Hi!
>
> This adds I2C controllers to the D3 device tree and enables I2C busses 0
> and 1 on the Draak board. (I2C2 is not connected on that board.)
>
> This revision addresses Geert's review comments and adds Reviewed-Bys.
> See below for details.
>
> CU
> Uli
>
>
> Changes since v1:
> - pinctrl: patch dropped, has been picked up
> - i2c-rcar: patch dropped, redundant
> - dtsi: added dmac2 for i2c0-2
> - dtsi: fixed internal SCL delays
> - dts: fixed EEPROM compatible string
> - bindings: added Rohm EEPROM
> - bindings: fixed typo in i2c-rcar bindings
>
>
> Ulrich Hecht (5):
> arm64: renesas: r8a77995: add I2C support
> arm64: renesas: draak: enable I2C controller 0 and EEPROM
> arm64: renesas: draak: enable I2C controller 1
Thanks, I have applied the arm64 patches after updating their prefix to
"arm64: dts: renesas:".
> i2c: rcar: document R8A77995 bindings
> dt-bindings: at24: add bindings for Rohm BR24T01
>
> Documentation/devicetree/bindings/eeprom/at24.txt | 2 +
> Documentation/devicetree/bindings/i2c/i2c-rcar.txt | 1 +
> arch/arm64/boot/dts/renesas/r8a77995-draak.dts | 28 +
> arch/arm64/boot/dts/renesas/r8a77995.dtsi | 67
> ++
> 4 files changed, 98 insertions(+)
>
> --
> 2.7.4
>