Re: [PATCH V2] ARM: S5P: Fix compilation error for exynos4_defconfig
On 06/03/11 00:04, Tushar Behera wrote: Added Kconfig entry for setup-usb-phy.c on which EHCI support is dependent on. Following the naming convention of other setup files, we have following renaming. usb-phy.c ==> setup-usb-phy.c Signed-off-by: Tushar Behera --- arch/arm/mach-exynos4/Kconfig |6 ++ arch/arm/mach-exynos4/Makefile |2 +- .../mach-exynos4/{usb-phy.c => setup-usb-phy.c}|0 3 files changed, 7 insertions(+), 1 deletions(-) rename arch/arm/mach-exynos4/{usb-phy.c => setup-usb-phy.c} (100%) diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index b92c1e5..a45a022 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -91,6 +91,11 @@ config EXYNOS4_SETUP_FIMC help Common setup code for the camera interfaces. +config EXYNOS4_SETUP_USB_PHY + bool + help + Common setup code for USB PHY controller + # machine support menu "EXYNOS4 Machines" @@ -176,6 +181,7 @@ config MACH_NURI select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C5 select EXYNOS4_SETUP_SDHCI + select EXYNOS4_SETUP_USB_PHY select SAMSUNG_DEV_PWM help Machine support for Samsung Mobile NURI Board. diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile index a9bb94f..60fe5ec 100644 --- a/arch/arm/mach-exynos4/Makefile +++ b/arch/arm/mach-exynos4/Makefile @@ -56,4 +56,4 @@ obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD)+= setup-keypad.o obj-$(CONFIG_EXYNOS4_SETUP_SDHCI) += setup-sdhci.o obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO)+= setup-sdhci-gpio.o -obj-$(CONFIG_USB_SUPPORT) += usb-phy.o +obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY)+= setup-usb-phy.o diff --git a/arch/arm/mach-exynos4/usb-phy.c b/arch/arm/mach-exynos4/setup-usb-phy.c similarity index 100% rename from arch/arm/mach-exynos4/usb-phy.c rename to arch/arm/mach-exynos4/setup-usb-phy.c I think, basically, the setup-usbphy.c would be in plat-s5p/ because s5p_usb_phy_{init,exit} is called from plat-s5p/dev-echi.c and need to separate exynos(mach-) and common s5p(plat-) stuff so that can be used from other s5p usb to control usb phy. Since it is not used for others so will apply this to fix build error. However, we need to sort this out later. Tushar, you don't need to re-submit this for removing white space :) But as you know, please make sure that your patch has no problem with checkpatch.pl before submitting. Thanks. Best regards, Kgene. -- Kukjin Kim , Senior Engineer, SW Solution Development Team, Samsung Electronics Co., Ltd. -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
RE: [PATCH V2] ARM: S5P: Fix compilation error for exynos4_defconfig
Hello, On Friday, June 03, 2011 1:52 PM Thomas Abraham wrote: > On 3 June 2011 12:34, Tushar Behera wrote: > > Added Kconfig entry for setup-usb-phy.c on which EHCI support is > > dependent on. > > > > Following the naming convention of other setup files, we have following > > renaming. > > usb-phy.c ==> setup-usb-phy.c > > > > Signed-off-by: Tushar Behera > > --- > > arch/arm/mach-exynos4/Kconfig | 6 ++ > > arch/arm/mach-exynos4/Makefile | 2 +- > > .../mach-exynos4/{usb-phy.c => setup-usb-phy.c} | 0 > > 3 files changed, 7 insertions(+), 1 deletions(-) > > rename arch/arm/mach-exynos4/{usb-phy.c => setup-usb-phy.c} (100%) > > > > diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach- > exynos4/Kconfig > > index b92c1e5..a45a022 100644 > > --- a/arch/arm/mach-exynos4/Kconfig > > +++ b/arch/arm/mach-exynos4/Kconfig > > @@ -91,6 +91,11 @@ config EXYNOS4_SETUP_FIMC > > help > > Common setup code for the camera interfaces. > > > > +config EXYNOS4_SETUP_USB_PHY > > + bool > > + help > > + Common setup code for USB PHY controller > > + > > # machine support > > > > menu "EXYNOS4 Machines" > > @@ -176,6 +181,7 @@ config MACH_NURI > > select EXYNOS4_SETUP_I2C3 > > select EXYNOS4_SETUP_I2C5 > > select EXYNOS4_SETUP_SDHCI > > + select EXYNOS4_SETUP_USB_PHY > > select SAMSUNG_DEV_PWM > > help > > Machine support for Samsung Mobile NURI Board. > > diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach- > exynos4/Makefile > > index a9bb94f..60fe5ec 100644 > > --- a/arch/arm/mach-exynos4/Makefile > > +++ b/arch/arm/mach-exynos4/Makefile > > @@ -56,4 +56,4 @@ obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o > > obj-$(CONFIG_EXYNOS4_SETUP_SDHCI) += setup-sdhci.o > > obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o > > > > -obj-$(CONFIG_USB_SUPPORT) += usb-phy.o > > +obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o > > Since plat-s5p/dev-ehci.c is the only consumer of setup-usb-phy.c, > could setup-usb-phy.o be made dependent on the S5P_DEV_USB_EHCI config > option? Any particular reason to create a new EXYNOS4_SETUP_USB_PHY > config option in this case? Will there be a case where usb phy > configuration code would be used irrespective of dev-ehci being used? I suggested this solution to keep the consistence in the style. The other reason is the fact that USB PHY control functions should be also added to usb hs otg driver so these function will be used by 2 different devices. Best regards -- Marek Szyprowski Samsung Poland R&D Center -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH V2] ARM: S5P: Fix compilation error for exynos4_defconfig
On 3 June 2011 12:34, Tushar Behera wrote: > Added Kconfig entry for setup-usb-phy.c on which EHCI support is > dependent on. > > Following the naming convention of other setup files, we have following > renaming. > usb-phy.c ==> setup-usb-phy.c > > Signed-off-by: Tushar Behera > --- > arch/arm/mach-exynos4/Kconfig | 6 ++ > arch/arm/mach-exynos4/Makefile | 2 +- > .../mach-exynos4/{usb-phy.c => setup-usb-phy.c} | 0 > 3 files changed, 7 insertions(+), 1 deletions(-) > rename arch/arm/mach-exynos4/{usb-phy.c => setup-usb-phy.c} (100%) > > diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig > index b92c1e5..a45a022 100644 > --- a/arch/arm/mach-exynos4/Kconfig > +++ b/arch/arm/mach-exynos4/Kconfig > @@ -91,6 +91,11 @@ config EXYNOS4_SETUP_FIMC > help > Common setup code for the camera interfaces. > > +config EXYNOS4_SETUP_USB_PHY > + bool > + help > + Common setup code for USB PHY controller > + > # machine support > > menu "EXYNOS4 Machines" > @@ -176,6 +181,7 @@ config MACH_NURI > select EXYNOS4_SETUP_I2C3 > select EXYNOS4_SETUP_I2C5 > select EXYNOS4_SETUP_SDHCI > + select EXYNOS4_SETUP_USB_PHY > select SAMSUNG_DEV_PWM > help > Machine support for Samsung Mobile NURI Board. > diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile > index a9bb94f..60fe5ec 100644 > --- a/arch/arm/mach-exynos4/Makefile > +++ b/arch/arm/mach-exynos4/Makefile > @@ -56,4 +56,4 @@ obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o > obj-$(CONFIG_EXYNOS4_SETUP_SDHCI) += setup-sdhci.o > obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o > > -obj-$(CONFIG_USB_SUPPORT) += usb-phy.o > +obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o Since plat-s5p/dev-ehci.c is the only consumer of setup-usb-phy.c, could setup-usb-phy.o be made dependent on the S5P_DEV_USB_EHCI config option? Any particular reason to create a new EXYNOS4_SETUP_USB_PHY config option in this case? Will there be a case where usb phy configuration code would be used irrespective of dev-ehci being used? Thanks, Thomas. > diff --git a/arch/arm/mach-exynos4/usb-phy.c > b/arch/arm/mach-exynos4/setup-usb-phy.c > similarity index 100% > rename from arch/arm/mach-exynos4/usb-phy.c > rename to arch/arm/mach-exynos4/setup-usb-phy.c > -- > 1.7.1 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" > in > the body of a message to majord...@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH V2] ARM: S5P: Fix compilation error for exynos4_defconfig
On Friday 03 June 2011 02:28 PM, Joonyoung Shim wrote: On 2011-06-03 오후 5:44, Tushar Behera wrote: Hi, On Friday 03 June 2011 01:20 PM, Joonyoung Shim wrote: On 2011-06-03 오후 4:04, Tushar Behera wrote: Added Kconfig entry for setup-usb-phy.c on which EHCI support is dependent on. Following the naming convention of other setup files, we have following renaming. usb-phy.c ==> setup-usb-phy.c Signed-off-by: Tushar Behera --- arch/arm/mach-exynos4/Kconfig | 6 ++ arch/arm/mach-exynos4/Makefile | 2 +- .../mach-exynos4/{usb-phy.c => setup-usb-phy.c} | 0 3 files changed, 7 insertions(+), 1 deletions(-) rename arch/arm/mach-exynos4/{usb-phy.c => setup-usb-phy.c} (100%) There is one white space but Acked-by: Joonyoung Shim diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index b92c1e5..a45a022 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -91,6 +91,11 @@ config EXYNOS4_SETUP_FIMC help Common setup code for the camera interfaces. +config EXYNOS4_SETUP_USB_PHY + bool + help + Common setup code for USB PHY controller White space. The space was added so that it is formatted in the same way as other Kconfig entries. So your patch has 1 error by scripts/checkpatch.pl, it can be removed using scripts/cleanpatch. :-( .. I had overseen that error .. thanks for pointing out ... Kukjin, If required, I will resubmit again. -- Tushar Behera -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH V2] ARM: S5P: Fix compilation error for exynos4_defconfig
On 2011-06-03 오후 5:44, Tushar Behera wrote: Hi, On Friday 03 June 2011 01:20 PM, Joonyoung Shim wrote: On 2011-06-03 오후 4:04, Tushar Behera wrote: Added Kconfig entry for setup-usb-phy.c on which EHCI support is dependent on. Following the naming convention of other setup files, we have following renaming. usb-phy.c ==> setup-usb-phy.c Signed-off-by: Tushar Behera --- arch/arm/mach-exynos4/Kconfig | 6 ++ arch/arm/mach-exynos4/Makefile | 2 +- .../mach-exynos4/{usb-phy.c => setup-usb-phy.c} | 0 3 files changed, 7 insertions(+), 1 deletions(-) rename arch/arm/mach-exynos4/{usb-phy.c => setup-usb-phy.c} (100%) There is one white space but Acked-by: Joonyoung Shim diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index b92c1e5..a45a022 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -91,6 +91,11 @@ config EXYNOS4_SETUP_FIMC help Common setup code for the camera interfaces. +config EXYNOS4_SETUP_USB_PHY + bool + help + Common setup code for USB PHY controller White space. The space was added so that it is formatted in the same way as other Kconfig entries. So your patch has 1 error by scripts/checkpatch.pl, it can be removed using scripts/cleanpatch. -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH V2] ARM: S5P: Fix compilation error for exynos4_defconfig
Hi, On Friday 03 June 2011 01:20 PM, Joonyoung Shim wrote: On 2011-06-03 오후 4:04, Tushar Behera wrote: Added Kconfig entry for setup-usb-phy.c on which EHCI support is dependent on. Following the naming convention of other setup files, we have following renaming. usb-phy.c ==> setup-usb-phy.c Signed-off-by: Tushar Behera --- arch/arm/mach-exynos4/Kconfig | 6 ++ arch/arm/mach-exynos4/Makefile | 2 +- .../mach-exynos4/{usb-phy.c => setup-usb-phy.c} | 0 3 files changed, 7 insertions(+), 1 deletions(-) rename arch/arm/mach-exynos4/{usb-phy.c => setup-usb-phy.c} (100%) There is one white space but Acked-by: Joonyoung Shim diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index b92c1e5..a45a022 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -91,6 +91,11 @@ config EXYNOS4_SETUP_FIMC help Common setup code for the camera interfaces. +config EXYNOS4_SETUP_USB_PHY + bool + help + Common setup code for USB PHY controller White space. The space was added so that it is formatted in the same way as other Kconfig entries. + # machine support menu "EXYNOS4 Machines" @@ -176,6 +181,7 @@ config MACH_NURI select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C5 select EXYNOS4_SETUP_SDHCI + select EXYNOS4_SETUP_USB_PHY select SAMSUNG_DEV_PWM help Machine support for Samsung Mobile NURI Board. diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile index a9bb94f..60fe5ec 100644 --- a/arch/arm/mach-exynos4/Makefile +++ b/arch/arm/mach-exynos4/Makefile @@ -56,4 +56,4 @@ obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o obj-$(CONFIG_EXYNOS4_SETUP_SDHCI) += setup-sdhci.o obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o -obj-$(CONFIG_USB_SUPPORT) += usb-phy.o +obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o diff --git a/arch/arm/mach-exynos4/usb-phy.c b/arch/arm/mach-exynos4/setup-usb-phy.c similarity index 100% rename from arch/arm/mach-exynos4/usb-phy.c rename to arch/arm/mach-exynos4/setup-usb-phy.c -- Tushar Behera -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
Re: [PATCH V2] ARM: S5P: Fix compilation error for exynos4_defconfig
Acked-by: Jingoo Han > --- Original Message --- > Sender : Tushar Behera > Date : Jun 03, 2011 16:04 (GMT+09:00) > Title : [PATCH V2] ARM: S5P: Fix compilation error for exynos4_defconfig > > Added Kconfig entry for setup-usb-phy.c on which EHCI support is > dependent on. > > Following the naming convention of other setup files, we have following > renaming. > usb-phy.c ==> setup-usb-phy.c > > Signed-off-by: Tushar Behera > --- > arch/arm/mach-exynos4/Kconfig |6 ++ > arch/arm/mach-exynos4/Makefile |2 +- > .../mach-exynos4/{usb-phy.c => setup-usb-phy.c}|0 > 3 files changed, 7 insertions(+), 1 deletions(-) > rename arch/arm/mach-exynos4/{usb-phy.c => setup-usb-phy.c} (100%) > > diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig > index b92c1e5..a45a022 100644 > --- a/arch/arm/mach-exynos4/Kconfig > +++ b/arch/arm/mach-exynos4/Kconfig > @@ -91,6 +91,11 @@ config EXYNOS4_SETUP_FIMC > help > Common setup code for the camera interfaces. > > +config EXYNOS4_SETUP_USB_PHY > + bool > + help > + Common setup code for USB PHY controller > + > # machine support > > menu "EXYNOS4 Machines" > @@ -176,6 +181,7 @@ config MACH_NURI > select EXYNOS4_SETUP_I2C3 > select EXYNOS4_SETUP_I2C5 > select EXYNOS4_SETUP_SDHCI > + select EXYNOS4_SETUP_USB_PHY > select SAMSUNG_DEV_PWM > help > Machine support for Samsung Mobile NURI Board. > diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile > index a9bb94f..60fe5ec 100644 > --- a/arch/arm/mach-exynos4/Makefile > +++ b/arch/arm/mach-exynos4/Makefile > @@ -56,4 +56,4 @@ obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD) += setup-keypad.o > obj-$(CONFIG_EXYNOS4_SETUP_SDHCI)+= setup-sdhci.o > obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO) += setup-sdhci-gpio.o > > -obj-$(CONFIG_USB_SUPPORT)+= usb-phy.o > +obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY) += setup-usb-phy.o > diff --git a/arch/arm/mach-exynos4/usb-phy.c > b/arch/arm/mach-exynos4/setup-usb-phy.c > similarity index 100% > rename from arch/arm/mach-exynos4/usb-phy.c > rename to arch/arm/mach-exynos4/setup-usb-phy.c N떑꿩�r툤y鉉싕b쾊Ф푤v�^�)頻{.n�+돴쪐{굇ß틏,″㎍썳變}찠꼿쟺�&j:+v돣�쳭喩zZ+�+zf"톒쉱�~넮녬i鎬z�췿ⅱ�?솳鈺�&�)刪f
Re: [PATCH V2] ARM: S5P: Fix compilation error for exynos4_defconfig
On 2011-06-03 오후 4:04, Tushar Behera wrote: Added Kconfig entry for setup-usb-phy.c on which EHCI support is dependent on. Following the naming convention of other setup files, we have following renaming. usb-phy.c ==> setup-usb-phy.c Signed-off-by: Tushar Behera --- arch/arm/mach-exynos4/Kconfig |6 ++ arch/arm/mach-exynos4/Makefile |2 +- .../mach-exynos4/{usb-phy.c => setup-usb-phy.c}|0 3 files changed, 7 insertions(+), 1 deletions(-) rename arch/arm/mach-exynos4/{usb-phy.c => setup-usb-phy.c} (100%) There is one white space but Acked-by: Joonyoung Shim diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index b92c1e5..a45a022 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -91,6 +91,11 @@ config EXYNOS4_SETUP_FIMC help Common setup code for the camera interfaces. +config EXYNOS4_SETUP_USB_PHY + bool + help + Common setup code for USB PHY controller White space. + # machine support menu "EXYNOS4 Machines" @@ -176,6 +181,7 @@ config MACH_NURI select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C5 select EXYNOS4_SETUP_SDHCI + select EXYNOS4_SETUP_USB_PHY select SAMSUNG_DEV_PWM help Machine support for Samsung Mobile NURI Board. diff --git a/arch/arm/mach-exynos4/Makefile b/arch/arm/mach-exynos4/Makefile index a9bb94f..60fe5ec 100644 --- a/arch/arm/mach-exynos4/Makefile +++ b/arch/arm/mach-exynos4/Makefile @@ -56,4 +56,4 @@ obj-$(CONFIG_EXYNOS4_SETUP_KEYPAD)+= setup-keypad.o obj-$(CONFIG_EXYNOS4_SETUP_SDHCI) += setup-sdhci.o obj-$(CONFIG_EXYNOS4_SETUP_SDHCI_GPIO)+= setup-sdhci-gpio.o -obj-$(CONFIG_USB_SUPPORT) += usb-phy.o +obj-$(CONFIG_EXYNOS4_SETUP_USB_PHY)+= setup-usb-phy.o diff --git a/arch/arm/mach-exynos4/usb-phy.c b/arch/arm/mach-exynos4/setup-usb-phy.c similarity index 100% rename from arch/arm/mach-exynos4/usb-phy.c rename to arch/arm/mach-exynos4/setup-usb-phy.c -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html