Re: [linux-sunxi] Re: iNet K70E board
On Thursday, May 21, 2015 at 5:12:07 PM UTC+7, Luc Verhaegen wrote:
> On Thu, May 21, 2015 at 03:00:14AM -0700, sand...@outlook.com wrote:
> > On Wednesday, January 22, 2014 at 10:52:27 PM UTC+7, Luc Verhaegen wrote:
> > > On Wed, Jan 22, 2014 at 10:40:49AM -0500, ferar achkar wrote:
> > > > greetings Luc,
> > > > I am trying to build a boot-able SD card i.e.
> > > > *u-boot-sunxi-with-spl.bin* based on u-boot-sunxi source tree, for an
> > > > INET-K70E board that has currently a working android, I have generated
> > > > *u-boot-sunxi-with-spl.bin *based on your INet_K70HC board cfg, but it
> > > > did not boot, can you please advise on how you populated struct
> > > > dram_para in 'board/sunxi/dram_inet_k70hc.c' file:
> > > >
> > > > static struct dram_para dram_para = { /// for INet_K70HC board as
> > > > authored by Luc Verhaegen 2014-01-02 06:37:24
> > > > .clock = 384,
> > > > .type = 3,
> > > > .rank_num = 1,
> > > > .density = 4096,
> > > > .io_width = 16,
> > > > .bus_width = 32,
> > > > .cas = 9,
> > > > .zq = 0x12331a7f,
> > > > .odt_en = 0,
> > > > .size = 1024,
> > > > .tpr0 = 0x42d899b7,
> > > > .tpr1 = 0xa090,
> > > > .tpr2 = 0x22a00,
> > > > .tpr3 = 0,
> > > > .tpr4 = 1,
> > > > .tpr5 = 0,
> > > > .emr1 = 0x4,
> > > > .emr2 = 0x10,
> > > > .emr3 = 0,
> > > > };
> > > >
> > > > since the i have used the same script.bin currently on the nand flash,
> > > > i
> > > > am not sure, but i think the dram_para values for INet_K70HC are not
> > > > correct for the INET-K70E board (below is a snapshot of the board).
> > > > much appreciated,
> > > > ferar
> > >
> > > Do not send emails to people directly, especially when they are general
> > > sunxi questions. Use the mailing list.
> > >
> > > "it did not boot" could be a great many things. Attach serial and find
> > > out.
> > >
> > > The image attached shows only a tiny part of the board. So it usually
> > > would not be very useful to begin with.
> > >
> > > But... Even with this small part of the board visible, it is clear that
> > > this is a completely different board from the k70hc. Please work through
> > > the http://linux-sunxi.org/New_Device_howto meticulously before you do
> > > anything else.
> > >
> > > Luc Verhaegen.
> >
> > here: http://thuvien.bkc.vn/Tablet/Firmware/2GOOD/2Good.VenusPro.rar
>
> Thanks. I will pull that in on the weekend and extract the necessary
> info then.
>
> Luc Verhaegen.
do you have a kernel source of this board? none of sun7i kernel work
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Re: [linux-sunxi] Re: iNet K70E board
On Thu, May 21, 2015 at 03:00:14AM -0700, sand...@outlook.com wrote:
> On Wednesday, January 22, 2014 at 10:52:27 PM UTC+7, Luc Verhaegen wrote:
> > On Wed, Jan 22, 2014 at 10:40:49AM -0500, ferar achkar wrote:
> > > greetings Luc,
> > > I am trying to build a boot-able SD card i.e.
> > > *u-boot-sunxi-with-spl.bin* based on u-boot-sunxi source tree, for an
> > > INET-K70E board that has currently a working android, I have generated
> > > *u-boot-sunxi-with-spl.bin *based on your INet_K70HC board cfg, but it
> > > did not boot, can you please advise on how you populated struct
> > > dram_para in 'board/sunxi/dram_inet_k70hc.c' file:
> > >
> > > static struct dram_para dram_para = { /// for INet_K70HC board as
> > > authored by Luc Verhaegen 2014-01-02 06:37:24
> > > .clock = 384,
> > > .type = 3,
> > > .rank_num = 1,
> > > .density = 4096,
> > > .io_width = 16,
> > > .bus_width = 32,
> > > .cas = 9,
> > > .zq = 0x12331a7f,
> > > .odt_en = 0,
> > > .size = 1024,
> > > .tpr0 = 0x42d899b7,
> > > .tpr1 = 0xa090,
> > > .tpr2 = 0x22a00,
> > > .tpr3 = 0,
> > > .tpr4 = 1,
> > > .tpr5 = 0,
> > > .emr1 = 0x4,
> > > .emr2 = 0x10,
> > > .emr3 = 0,
> > > };
> > >
> > > since the i have used the same script.bin currently on the nand flash, i
> > > am not sure, but i think the dram_para values for INet_K70HC are not
> > > correct for the INET-K70E board (below is a snapshot of the board).
> > > much appreciated,
> > > ferar
> >
> > Do not send emails to people directly, especially when they are general
> > sunxi questions. Use the mailing list.
> >
> > "it did not boot" could be a great many things. Attach serial and find
> > out.
> >
> > The image attached shows only a tiny part of the board. So it usually
> > would not be very useful to begin with.
> >
> > But... Even with this small part of the board visible, it is clear that
> > this is a completely different board from the k70hc. Please work through
> > the http://linux-sunxi.org/New_Device_howto meticulously before you do
> > anything else.
> >
> > Luc Verhaegen.
>
> here: http://thuvien.bkc.vn/Tablet/Firmware/2GOOD/2Good.VenusPro.rar
Thanks. I will pull that in on the weekend and extract the necessary
info then.
Luc Verhaegen.
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/d/optout.
Re: [linux-sunxi] Re: iNet K70E board
On Tue, Nov 4, 2014 at 11:51 AM, wrote: > hello guys i need the firmware for my tablet which is inet k70e rev01 > please anyone can give me? i flashed the wrong firmware now the wifi, and > the auto rotation doesnt work. any help is appreciated > Even if someone has that device, it's not very easy to extract the firmware so that it can be copied on yours. Your best chance is to contact the manufacturer at http://www.inet-tek.com/a/K70/20130831/127.html so that they upload somewhere the correct firmware file. If you manage to get some feedback from them, do tell us. Simos -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [linux-sunxi] Re: iNet K70E board
On Tue, Nov 04, 2014 at 06:43:31AM -0800, Zyan Nawaz wrote: > so i need stock rom for INET K70E REV01 to flash back to stock Do not take these things off the list. But yes. And you might consider fixing that device page so you or someone else wouldn't have to find the stock image in future and could just use our code. Luc Verhaegen. -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [linux-sunxi] Re: iNet K70E board
On Tue, Nov 04, 2014 at 01:51:58AM -0800, zyanna...@gmail.com wrote: > hello guys i need the firmware for my tablet which is inet k70e rev01 please > anyone can give me? i flashed the wrong firmware now the wifi, and the auto > rotation doesnt work. any help is appreciated Nope. http://linux-sunxi.org/Inet_k70e lacks the really reall important bits. Luc Verhaegen. -- You received this message because you are subscribed to the Google Groups "linux-sunxi" group. To unsubscribe from this group and stop receiving emails from it, send an email to linux-sunxi+unsubscr...@googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [linux-sunxi] Re: iNet K70E board
On Wed, Jan 22, 2014 at 12:27:14PM -0800, fachkar.dataw...@gmail.com wrote:
> > > Do not send emails to people directly, especially when they are general
> > > sunxi questions. Use the mailing list.
> >
> > > "it did not boot" could be a great many things. Attach serial and find
> > > out.
> >
> > > The image attached shows only a tiny part of the board. So it usually
> > > would not be very useful to begin with.
> >
> > > But... Even with this small part of the board visible, it is clear that
> > > this is a completely different board from the k70hc. Please work through
> > > the http://linux-sunxi.org/New_Device_howto meticulously before you do
> > > anything else.
Wtf happened here?
> Thanks Luc, Following are the detailed steps i followed to create the SD card:
>
> 1. connected a serial console and booted to a working android then ran the
> a10-meminfo
> root@android:/ # a10-meminfo-static
>
> dram_clk = 408
> dram_type = 3
> dram_rank_num = 1
> dram_chip_density = 4096
> dram_io_width = 16
> dram_bus_width= 32
> dram_cas = 9
> dram_zq = 0x7f
> dram_odt_en = 0
> dram_tpr0 = 0x42d899b7
> dram_tpr1 = 0xa090
> dram_tpr2 = 0x22a00
> dram_tpr3 = 0x0
> dram_emr1 = 0x4
> dram_emr2 = 0x10
> dram_emr3 = 0x0
> root@android:/ #
> 2. copy and pull script.bin from nanda partition
>
> 3. git clone -b sunxi https://github.com/linux-sunxi/u-boot-sunxi.git
>
> 4. followed the steps in
> http://linux-sunxi.org/U-Boot#Adding_a_new_device_to_U-Boot and added :
>
> [ +obj-$(CONFIG_INET_K70HC)+= dram_inet_k70e.o ] to board/sunxi/Makefile.
> [ +Active arm armv7 sunxi - sunxi INet_K70E sun7i:INET_K70E,SPL ]
> to boards.cfg.
> And finally created new file: board/sunxi/dram_inet_k70e.c based on
> board/sunxi/dram_inet_k70hc.c based on the Luc Verhaegen 's
> board/sunxi/dram_inet_k70hc.c, then update the values according to
> a10-meminfo output
>
> 5. compiled u-boot and got u-boot-sunxi-with-spl.bin :
> ~/sunxi/u-boot-sunxi> make -j4 INet_K70HC
> CROSS_COMPILE=/home/fachkar/lichee_a20/out/android/common/buildroot/external-toolchain/bin/arm-linux-gnueabi-
>
> 6. created two partitions on the sd card: +16M partition and the partition
> is the remaining of 8 GB
>
> 7. copied script.bin and the extracted uImage to first partition of +16M on
> the SD card
>
> 8. Also on the +16MB partition created boot.cmd and boot.src as per
> http://linux-sunxi.org/Manual_build_howto . which contains:
>
> setenv bootargs console=ttyS0,115200 root=/dev/mmcblk0p2 rootwait panic=10
> ${extra}
> fatload mmc 0 0x4300 script.bin || ext2load mmc 0 0x4300 script.bin
> fatload mmc 0 0x4800 uImage || ext2load mmc 0 0x4800 boot/uImage
> bootm 0x4800
>
> 9. umount both partitions of the sd card and fused u-boot-sunxi-with-spl.bin:
>
> sudo dd if=u-boot-sunxi-with-spl.bin of=/dev/sdf bs=1024 seek=8
>
> when trying to boot from sd card, LCD back light does not turn on, and
> nothing shows on console, any advise?
> appreciated again
>
> ferar
There are many places above where i seriously frown, and i could pick it
apart and find a few faults or two.
But what really bothers me is that you haven't even started creating a
wiki page for the inet_k70e. You are _not_ meticulously working through
http://linux-sunxi.org/New_Device_howto and therefor whatever you are
writing above is pretty pointless.
Luc Verhaegen.
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
Re: [linux-sunxi] Re: iNet K70E board
On Wednesday, January 22, 2014 11:06:18 AM UTC-5, Luc Verhaegen wrote:
> On Wed, Jan 22, 2014 at 04:52:27PM +0100, Luc Verhaegen wrote:
>
> > On Wed, Jan 22, 2014 at 10:40:49AM -0500, ferar achkar wrote:
>
> > > greetings Luc,
>
> > > I am trying to build a boot-able SD card i.e.
>
> > > *u-boot-sunxi-with-spl.bin* based on u-boot-sunxi source tree, for an
>
> > > INET-K70E board that has currently a working android, I have generated
>
> > > *u-boot-sunxi-with-spl.bin *based on your INet_K70HC board cfg, but it
>
> > > did not boot, can you please advise on how you populated struct
>
> > > dram_para in 'board/sunxi/dram_inet_k70hc.c' file:
>
> > >
>
> > > static struct dram_para dram_para = { /// for INet_K70HC board as
>
> > > authored by Luc Verhaegen 2014-01-02 06:37:24
>
> > > .clock = 384,
>
> > > .type = 3,
>
> > > .rank_num = 1,
>
> > > .density = 4096,
>
> > > .io_width = 16,
>
> > > .bus_width = 32,
>
> > > .cas = 9,
>
> > > .zq = 0x12331a7f,
>
> > > .odt_en = 0,
>
> > > .size = 1024,
>
> > > .tpr0 = 0x42d899b7,
>
> > > .tpr1 = 0xa090,
>
> > > .tpr2 = 0x22a00,
>
> > > .tpr3 = 0,
>
> > > .tpr4 = 1,
>
> > > .tpr5 = 0,
>
> > > .emr1 = 0x4,
>
> > > .emr2 = 0x10,
>
> > > .emr3 = 0,
>
> > > };
>
> > >
>
> > > since the i have used the same script.bin currently on the nand flash, i
>
> > > am not sure, but i think the dram_para values for INet_K70HC are not
>
> > > correct for the INET-K70E board (below is a snapshot of the board).
>
> > > much appreciated,
>
> > > ferar
>
> >
>
> > Do not send emails to people directly, especially when they are general
>
> > sunxi questions. Use the mailing list.
>
> >
>
> > "it did not boot" could be a great many things. Attach serial and find
>
> > out.
>
> >
>
> > The image attached shows only a tiny part of the board. So it usually
>
> > would not be very useful to begin with.
>
> >
>
> > But... Even with this small part of the board visible, it is clear that
>
> > this is a completely different board from the k70hc. Please work through
>
> > the http://linux-sunxi.org/New_Device_howto meticulously before you do
>
> > anything else.
>
> >
>
> > Luc Verhaegen.
>
>
>
> Also, which of datawinds ubislates is this? Ubislate 3G7?
>
>
>
> Luc Verhaegen.
This not a datawind tablet!
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
Re: [linux-sunxi] Re: iNet K70E board
On Wednesday, January 22, 2014 11:06:18 AM UTC-5, Luc Verhaegen wrote:
> On Wed, Jan 22, 2014 at 04:52:27PM +0100, Luc Verhaegen wrote:
>
> > On Wed, Jan 22, 2014 at 10:40:49AM -0500, ferar achkar wrote:
>
> > > greetings Luc,
>
> > > I am trying to build a boot-able SD card i.e.
>
> > > *u-boot-sunxi-with-spl.bin* based on u-boot-sunxi source tree, for an
>
> > > INET-K70E board that has currently a working android, I have generated
>
> > > *u-boot-sunxi-with-spl.bin *based on your INet_K70HC board cfg, but it
>
> > > did not boot, can you please advise on how you populated struct
>
> > > dram_para in 'board/sunxi/dram_inet_k70hc.c' file:
>
> > >
>
> > > static struct dram_para dram_para = { /// for INet_K70HC board as
>
> > > authored by Luc Verhaegen 2014-01-02 06:37:24
>
> > > .clock = 384,
>
> > > .type = 3,
>
> > > .rank_num = 1,
>
> > > .density = 4096,
>
> > > .io_width = 16,
>
> > > .bus_width = 32,
>
> > > .cas = 9,
>
> > > .zq = 0x12331a7f,
>
> > > .odt_en = 0,
>
> > > .size = 1024,
>
> > > .tpr0 = 0x42d899b7,
>
> > > .tpr1 = 0xa090,
>
> > > .tpr2 = 0x22a00,
>
> > > .tpr3 = 0,
>
> > > .tpr4 = 1,
>
> > > .tpr5 = 0,
>
> > > .emr1 = 0x4,
>
> > > .emr2 = 0x10,
>
> > > .emr3 = 0,
>
> > > };
>
> > >
>
> > > since the i have used the same script.bin currently on the nand flash, i
>
> > > am not sure, but i think the dram_para values for INet_K70HC are not
>
> > > correct for the INET-K70E board (below is a snapshot of the board).
>
> > > much appreciated,
>
> > > ferar
>
> >
>
> > Do not send emails to people directly, especially when they are general
>
> > sunxi questions. Use the mailing list.
>
> >
>
> > "it did not boot" could be a great many things. Attach serial and find
>
> > out.
>
> >
>
> > The image attached shows only a tiny part of the board. So it usually
>
> > would not be very useful to begin with.
>
> >
>
> > But... Even with this small part of the board visible, it is clear that
>
> > this is a completely different board from the k70hc. Please work through
>
> > the http://linux-sunxi.org/New_Device_howto meticulously before you do
>
> > anything else.
>
> >
>
> > Luc Verhaegen.
>
>
>
> Also, which of datawinds ubislates is this? Ubislate 3G7?
>
>
>
> Luc Verhaegen.
On Wednesday, January 22, 2014 11:06:18 AM UTC-5, Luc Verhaegen wrote:
> On Wed, Jan 22, 2014 at 04:52:27PM +0100, Luc Verhaegen wrote:
>
> > On Wed, Jan 22, 2014 at 10:40:49AM -0500, ferar achkar wrote:
>
> > > greetings Luc,
>
> > > I am trying to build a boot-able SD card i.e.
>
> > > *u-boot-sunxi-with-spl.bin* based on u-boot-sunxi source tree, for an
>
> > > INET-K70E board that has currently a working android, I have generated
>
> > > *u-boot-sunxi-with-spl.bin *based on your INet_K70HC board cfg, but it
>
> > > did not boot, can you please advise on how you populated struct
>
> > > dram_para in 'board/sunxi/dram_inet_k70hc.c' file:
>
> > >
>
> > > static struct dram_para dram_para = { /// for INet_K70HC board as
>
> > > authored by Luc Verhaegen 2014-01-02 06:37:24
>
> > > .clock = 384,
>
> > > .type = 3,
>
> > > .rank_num = 1,
>
> > > .density = 4096,
>
> > > .io_width = 16,
>
> > > .bus_width = 32,
>
> > > .cas = 9,
>
> > > .zq = 0x12331a7f,
>
> > > .odt_en = 0,
>
> > > .size = 1024,
>
> > > .tpr0 = 0x42d899b7,
>
> > > .tpr1 = 0xa090,
>
> > > .tpr2 = 0x22a00,
>
> > > .tpr3 = 0,
>
> > > .tpr4 = 1,
>
> > > .tpr5 = 0,
>
> > > .emr1 = 0x4,
>
> > > .emr2 = 0x10,
>
> > > .emr3 = 0,
>
> > > };
>
> > >
>
> > > since the i have used the same script.bin currently on the nand flash, i
>
> > > am not sure, but i think the dram_para values for INet_K70HC are not
>
> > > correct for the INET-K70E board (below is a snapshot of the board).
>
> > > much appreciated,
>
> > > ferar
>
> >
>
> > Do not send emails to people directly, especially when they are general
>
> > sunxi questions. Use the mailing list.
>
> >
>
> > "it did not boot" could be a great many things. Attach serial and find
>
> > out.
>
> >
>
> > The image attached shows only a tiny part of the board. So it usually
>
> > would not be very useful to begin with.
>
> >
>
> > But... Even with this small part of the board visible, it is clear that
>
> > this is a completely different board from the k70hc. Please work through
>
> > the http://linux-sunxi.org/New_Device_howto meticulously before you do
>
> > anything else.
>
> >
>
> > Luc Verhaegen.
>
>
>
> Also, which of datawinds ubislates is this? Ubislate 3G7?
>
>
>
> Luc Verhaegen.
On Wednesday, January 22, 2014 11:06:18 AM UTC-5, Luc Verhaegen wrote:
> On Wed, Jan 22, 2014 at 04:52:27PM +0100, Luc Verhaegen wrote:
>
> > On Wed, Jan 22, 2014 at 10:40:49AM -0500, ferar achkar wrote:
>
>
Re: [linux-sunxi] Re: iNet K70E board
On Wed, Jan 22, 2014 at 04:52:27PM +0100, Luc Verhaegen wrote:
> On Wed, Jan 22, 2014 at 10:40:49AM -0500, ferar achkar wrote:
> > greetings Luc,
> > I am trying to build a boot-able SD card i.e.
> > *u-boot-sunxi-with-spl.bin* based on u-boot-sunxi source tree, for an
> > INET-K70E board that has currently a working android, I have generated
> > *u-boot-sunxi-with-spl.bin *based on your INet_K70HC board cfg, but it
> > did not boot, can you please advise on how you populated struct
> > dram_para in 'board/sunxi/dram_inet_k70hc.c' file:
> >
> > static struct dram_para dram_para = { /// for INet_K70HC board as
> > authored by Luc Verhaegen 2014-01-02 06:37:24
> > .clock = 384,
> > .type = 3,
> > .rank_num = 1,
> > .density = 4096,
> > .io_width = 16,
> > .bus_width = 32,
> > .cas = 9,
> > .zq = 0x12331a7f,
> > .odt_en = 0,
> > .size = 1024,
> > .tpr0 = 0x42d899b7,
> > .tpr1 = 0xa090,
> > .tpr2 = 0x22a00,
> > .tpr3 = 0,
> > .tpr4 = 1,
> > .tpr5 = 0,
> > .emr1 = 0x4,
> > .emr2 = 0x10,
> > .emr3 = 0,
> > };
> >
> > since the i have used the same script.bin currently on the nand flash, i
> > am not sure, but i think the dram_para values for INet_K70HC are not
> > correct for the INET-K70E board (below is a snapshot of the board).
> > much appreciated,
> > ferar
>
> Do not send emails to people directly, especially when they are general
> sunxi questions. Use the mailing list.
>
> "it did not boot" could be a great many things. Attach serial and find
> out.
>
> The image attached shows only a tiny part of the board. So it usually
> would not be very useful to begin with.
>
> But... Even with this small part of the board visible, it is clear that
> this is a completely different board from the k70hc. Please work through
> the http://linux-sunxi.org/New_Device_howto meticulously before you do
> anything else.
>
> Luc Verhaegen.
Also, which of datawinds ubislates is this? Ubislate 3G7?
Luc Verhaegen.
--
You received this message because you are subscribed to the Google Groups
"linux-sunxi" group.
To unsubscribe from this group and stop receiving emails from it, send an email
to linux-sunxi+unsubscr...@googlegroups.com.
For more options, visit https://groups.google.com/groups/opt_out.
