Re: qemu file transfer.
This reply has been written serial fashion as I tested various things. I want to t/f files from windows to linux. I can t/f from linux to windows by creating temp iso files. Printing would be ok but I could print to disk the t/f the file. Nick Rout wrote: Barry: please do the following in the windows virtual machine running on qemu: Click Start|Run in the run command box that appears type winipcfg then enter I went online and started qemu with 'qemu c -hda /home/barry/win98.img' Selected ethernet adapter hostnameN9S4R9 DNS server (blank) Node Type Broadcast Adapter address 52-54-00-12-34-56 IP Address 10.0.2.20 Subnet mask 255.0.0.0 Gefault Gateway 0.0.0.0 All other options are blank From the command prompt, Both C:\ftp 10.0.2.2 and C:\ftp 10.0.2.20 gives 'ftp connect :10061' Next command I gave was ls. The response in each case is 'not connected' I can ping both IPs from windows When offline I tried 'qemu -user-net c -hda ~/win98.img' The response is 'Could not get DNS address' To start qemu while offline I need the '-dummy-net' option. I can only ping and ftp to 10.0.2.20, ls again shows 'not connected' Went online and started with 'qemu -user-net c -hda ~/win98.img'.I can now ping both numbers from windows. From linux I get 100% packet loss ftp 10.0.2.2 now starts and requests linux user/pswd. Help command provides a listing. dir ls both lock up the terminal. This will tell you what the ip address of the windows machine is. There is a drop down box - make sure you choose the right adaptor. The address should be something in the range of 10.0.2.x 10.0.2.20 The address of the linux machine should be 10.0.2.2 If you have your ftp server set up on the linux box try ftp'ing into it from the windows VM. Start a msdos command line thingy and simply type ftp 10.0.2.2 Feed back the results. as above On Fri, 21 Oct 2005 09:07:00 +1300 Nick Rout wrote: Barry you seem majorly confused between ftp and smb networking. Any t/f method will do but I do not want to have to go online every time What is it that you are trying to do?
qemu file transfer.
According to the documentation it should be possible to ftp files to/from qemu, but how do i set this up? I have a need to t/f files each way. ftp is working, I can bring up a prompt in a xterm, and ftp to localhost in gftp. I use gftp to access my website. Samba is installed running. I looked at the conf file using swat and laltered the workgrop name to 'WORKGROUP' same as windows. I also added a qemu section as follows [qemu] comment = Temporary file space path = /tmp read only = No guest ok = Yes fstype = FAT qemu starts windows 98 without any problem, but I need the -dummy-net option unless I am on line. File print sharing is enabled. Tcp/IP is installed for dialup (automatic IP) for ethernet(10.0.2.20 255.0.0.0). What gateway do I set? Your ideas on what to try next are wanted TIA Barry
Re: qemu file transfer.
On Thu, 20 Oct 2005 19:26, Barry wrote: Your ideas on what to try next are wanted Try WinXP. (Not joking!) I had troubles with Win98 in Qemu but when it worked it was as simple as Start Run \\192.168.10.11 (if you use the ipaddress of the host system you do not need to add it to the lmhosts file) Trouble was that it was either slow or intermittently successful. With Win XP it works quickly and reliably. I am really happy with it. I will probably invest in more RAM to get better performance with it. -- Regards, Robert -- Robert Fisher (aka - Rob, Bob, Robbie, Robbo, Fish) FishNet Computer Electrical Services www.fisher.net.nz Phone: 03 383 5807 Mobile: 027 477 3356
Re: qemu file transfer.
I posted full instructions a week or so ago, it was a long thread so happy hunting! On Thursday 20 October 2005 19:26, Barry wrote: According to the documentation it should be possible to ftp files to/from qemu, but how do i set this up? I have a need to t/f files each way. ftp is working, I can bring up a prompt in a xterm, and ftp to localhost in gftp. I use gftp to access my website. Samba is installed running. I looked at the conf file using swat and laltered the workgrop name to 'WORKGROUP' same as windows. I also added a qemu section as follows [qemu] comment = Temporary file space path = /tmp read only = No guest ok = Yes fstype = FAT qemu starts windows 98 without any problem, but I need the -dummy-net option unless I am on line. File print sharing is enabled. Tcp/IP is installed for dialup (automatic IP) for ethernet(10.0.2.20 255.0.0.0). What gateway do I set? Your ideas on what to try next are wanted TIA Barry
Re: qemu file transfer.
On Thu, 20 Oct 2005 20:30, Nick Rout wrote: I posted full instructions a week or so ago, it was a long thread so happy hunting! Barry, IMHO the simplest instructions were the ones on the website you posted about http://wiki.archlinux.org/index.php/Qemu Use these and the IP address as I mentioned in my last post and it just worked albeit with the less than satifactory reliabilty. (I kept thinking that it wasn't working but when I kept trying and retrying it would eventually work. Sometimes it would work first time without doing anything differently. WinXP has worked without fail) -- Regards, Robert -- Robert Fisher (aka - Rob, Bob, Robbie, Robbo, Fish) FishNet Computer Electrical Services www.fisher.net.nz Phone: 03 383 5807 Mobile: 027 477 3356
Re: qemu file transfer.
Thanks for the reply Rob. I went back to that page I found. It seems to presume that a network and file server are already set up which is not so. I have installed proftpd but am not sure about it being setup correctly. It is running Robert Fisher wrote: On Thu, 20 Oct 2005 19:26, Barry wrote: Your ideas on what to try next are wanted Try WinXP. (Not joking!) Unfortunately I do not have it available it was as simple as Start Run \\192.168.10.11 Windows replies 'the network name can not be found'. ping says'Network is unreachable' when offline, no reply when online (if you use the ipaddress of the host system you do not need to add it to the lmhosts file) This is a stand-alone box without any network setup at present. Barry
Re: qemu file transfer.
On Thursday 20 October 2005 22:58, Barry wrote: Thanks for the reply Rob. I went back to that page I found. It seems to presume that a network and file server are already set up which is not so. I have installed proftpd but am not sure about it being setup correctly. It is running Robert Fisher wrote: On Thu, 20 Oct 2005 19:26, Barry wrote: Your ideas on what to try next are wanted Try WinXP. (Not joking!) Unfortunately I do not have it available it was as simple as Start Run \\192.168.10.11 Windows replies 'the network name can not be found'. ping says'Network is unreachable' when offline, no reply when online (if you use the ipaddress of the host system you do not need to add it to the lmhosts file) This is a stand-alone box without any network setup at present. There you go then. Are you running a kernel + modules built by your Linux distributor or one you built yourself? In order to do networking things you _have_ to have networking enabled in the kernel, You need to either load the networking modules or compile them in. However if the only 'networking' you are trying to do is between the qemu environment and the Linux host machine fairly obviously you will not need to build any drivers for Network Interface Cards. -- CS
Re: qemu file transfer.
On Thu, 20 Oct 2005 22:58, Barry wrote: Windows replies 'the network name can not be found'. ping says'Network is unreachable' when offline, no reply when online (if you use the ipaddress of the host system you do not need to add it to the lmhosts file) This is a stand-alone box without any network setup at present. Just use, as I said above, the IP address of your host system (the Linux box) -- Regards, Robert -- Robert Fisher (aka - Rob, Bob, Robbie, Robbo, Fish) FishNet Computer Electrical Services www.fisher.net.nz Phone: 03 383 5807 Mobile: 027 477 3356
Re: qemu file transfer.
Barry you seem majorly confused between ftp and smb networking. What is it that you are trying to do? On Thu, 20 Oct 2005 19:26:06 +1300 Barry wrote: According to the documentation it should be possible to ftp files to/from qemu, but how do i set this up? I have a need to t/f files each way. ftp is working, I can bring up a prompt in a xterm, and ftp to localhost in gftp. I use gftp to access my website. Samba is installed running. I looked at the conf file using swat and laltered the workgrop name to 'WORKGROUP' same as windows. I also added a qemu section as follows [qemu] comment = Temporary file space path = /tmp read only = No guest ok = Yes fstype = FAT qemu starts windows 98 without any problem, but I need the -dummy-net option unless I am on line. File print sharing is enabled. Tcp/IP is installed for dialup (automatic IP) for ethernet(10.0.2.20 255.0.0.0). What gateway do I set? Your ideas on what to try next are wanted TIA Barry -- Nick Rout [EMAIL PROTECTED]
Re: qemu file transfer.
Barry: please do the following in the windows virtual machine running on qemu: Click Start|Run in the run command box that appears type winipcfg then enter This will tell you what the ip address of the windows machine is. There is a drop down box - make sure you choose the right adaptor. The address should be something in the range of 10.0.2.x The address of the linux machine should be 10.0.2.2 If you have your ftp server set up on the linux box try ftp'ing into it from the windows VM. Start a msdos command line thingy and simply type ftp 10.0.2.2 Feed back the results. On Fri, 21 Oct 2005 09:07:00 +1300 Nick Rout wrote: Barry you seem majorly confused between ftp and smb networking. What is it that you are trying to do? On Thu, 20 Oct 2005 19:26:06 +1300 Barry wrote: According to the documentation it should be possible to ftp files to/from qemu, but how do i set this up? -- Nick Rout [EMAIL PROTECTED]
Re: qemu file transfer.
On Fri, 21 Oct 2005 10:25, Nick Rout wrote: Barry: please do the following in the windows virtual machine running on qemu: The default proftp instalation on Mandrake allows users on the server to log in as themselves and opens by default in their home directory. Useful to know if the sever demands a login password. Cheers Ross Drummond
Re: qemu file transfer.
On Fri, 21 Oct 2005 12:21:30 +1300 Ross Drummond wrote: On Fri, 21 Oct 2005 10:25, Nick Rout wrote: Barry: please do the following in the windows virtual machine running on qemu: The default proftp instalation on Mandrake allows users on the server to log in as themselves and opens by default in their home directory. Useful to know if the sever demands a login password. Cheers Ross Drummond I had assumed barry knew what to do to log in to an ftp server. however, assumption is the mother of screwups. -- Nick Rout [EMAIL PROTECTED]
