Re: Suse 7.2
Keith Antoine babbled on about: On Sat, 3 Nov 2001 11:53, you wrote: Keith Antoine babbled on about: bpalogin -c /etc/bpalogin.conf copy /etc/rc.d/skeleton to /etc/rc.d/bplogin put this command into /etc/rc.d/bplogin in the start) section Sorry but I am as thick as two bricks when it comes to scripts, however I do NOT Have a /etc/rc.d/bpalogin, I do have a /etc/bpalogin.conf. Also isn't rc.d just a simlink to init.d ? If I were to copy the skelton to bpalogin wouldn't that just overwrite the bpalogin script? Thjis is the bpalogin script that is in /etc/bpalogin.conf --- # Default debug level is 1. Values range from 0-2 with 0 being silent # All information goes to the syslog. debuglevel 1 # The user name you have for your BPA account username ** # Your BPA password password *** # The default auth server is dce-server You can override this value, but # you would only do this if you have not set your default domain correctly # in your /etc/resolv.conf #authserver dce-server # You can override the default domain if you have your # resolv.conf set to not include the BPA domains. #authdomain vic.bigpond.net.au # The loginprog will be executed whenever BPALogin connects successfully # you could have it run a script to start a firewall, etc. The first # parm to the program will be the port number #connectedprog /etc/rc.d/rc.masq #disconnectedprog /etc/rc.d/rc.masq # If you want to bind BPALogin to a specific address rather than all # sockets, you can do that here. #localaddress 10.1.2.0 # You can now define the listen port instead of a random port # This will help with firewalls. #localport 5050 # Logging can be sent to syslog or sysout. #logging sysout # Set the minimum heartbeat interval. This can protect against # DoS attacks. minheartbeatinterval 60 then cd rc3.d ln -s ../bplogin S100bplogin cd ../rc5.d ln -s ../bplogin S100bplogin that should cause it to be run whenever you enter runlevel 3 or 5 I'm leaving to visit the folks, but if you can wait till late Sunday, early Monday, I can give you a script and all the steps necessary to implement it -- Douglas J Hunley (doug at hunley.homeip.net) - Linux User #174778 Admin: http://linux.nf Admin: http://hunley.homeip.net In 1665 Issac Newton became discouraged when he fell up a flight of stairs. ___ Linux-users mailing list Archives, Digests, etc at http://linux.nf/mailman/listinfo/linux-users
Re: Suse 7.2
On Sun, 4 Nov 2001 00:30, you wrote: I'm leaving to visit the folks, but if you can wait till late Sunday, early Monday, I can give you a script and all the steps necessary to implement it Yes of course I can, nothing is ever that important to me nowadays g -- Keith Antoine, 18 Arkana St, The Gap, Queensland 4061 Australia PH:61733002161 Retired Geriatric, Sometime Electronics Engineer, Knowall, Brain in storage ___ Linux-users mailing list Archives, Digests, etc at http://linux.nf/mailman/listinfo/linux-users
RE: Suse 7.2
Keith, Look in /etc/init.d for boot.local and you should be able to edit that file. Regards, Keith B. Keith Antoine [EMAIL PROTECTED] wrote: I am unable to start my internet login with Suse. I used to use a small startup in /etc/rc.local which does not exist in Suse. I have to type it in each time after login to get onto the net. So where is the startup for Suse progs tried in /etc a link to rc.d and boot.local but that does not work. -- Keith Antoine, 18 Arkana St, The Gap, Queensland 4061 Australia PH:61733002161 Retired Geriatric, Sometime Electronics Engineer, Knowall, Brain in storage ___ Linux-users mailing list Archives, Digests, etc at http://linux.nf/mailman/listinfo/linux-users ___ Linux-users mailing list Archives, Digests, etc at http://linux.nf/mailman/listinfo/linux-users
Re: Suse 7.2
On Sat, 3 Nov 2001 01:44, you wrote: Keith, Look in /etc/init.d for boot.local and you should be able to edit that file. Regards, Keith B. No it does not work. I have a program that starts up a login to my cable isp, telstra, in linux, which is unsupported by them (what else). I have to type this in, in a treminal and sued in: bpalogin -c /etc/bpalogin.conf When I enter this in /etc/init.d/boot.local it does not connect on boot up, I have also tried the full path; /usr/sbin/bpalogin -c /etc/bpalogin.conf and that also does not work In Caldera and Mandrake I used to put in, in /etc/rc.d/rc.local /etc/rc.d/init.d/bpalogin start This ofcourse will not do for Suse, damd well wish for a standard basic underlying OS layout. -- Keith Antoine, 18 Arkana St, The Gap, Queensland 4061 Australia PH:61733002161 Retired Geriatric, Sometime Electronics Engineer, Knowall, Brain in storage ___ Linux-users mailing list Archives, Digests, etc at http://linux.nf/mailman/listinfo/linux-users
Re: Suse 7.2
Keith Antoine babbled on about: bpalogin -c /etc/bpalogin.conf copy /etc/rc.d/skeleton to /etc/rc.d/bplogin put this command into /etc/rc.d/bplogin in the start) section then cd rc3.d ln -s ../bplogin S100bplogin cd ../rc5.d ln -s ../bplogin S100bplogin that should cause it to be run whenever you enter runlevel 3 or 5 -- Douglas J Hunley (doug at hunley.homeip.net) - Linux User #174778 Admin: http://linux.nf Admin: http://hunley.homeip.net PROGRAM - n. A magic spell cast over a computer allowing it to turn one's input into error messages. v. tr.- To engage in a pastime similar to banging one's head against a wall, but with fewer opportunities for reward. ___ Linux-users mailing list Archives, Digests, etc at http://linux.nf/mailman/listinfo/linux-users
Re: Suse 7.2
On Sat, 3 Nov 2001 11:53, you wrote: Keith Antoine babbled on about: bpalogin -c /etc/bpalogin.conf copy /etc/rc.d/skeleton to /etc/rc.d/bplogin put this command into /etc/rc.d/bplogin in the start) section Sorry but I am as thick as two bricks when it comes to scripts, however I do NOT Have a /etc/rc.d/bpalogin, I do have a /etc/bpalogin.conf. Also isn't rc.d just a simlink to init.d ? If I were to copy the skelton to bpalogin wouldn't that just overwrite the bpalogin script? Thjis is the bpalogin script that is in /etc/bpalogin.conf --- # Default debug level is 1. Values range from 0-2 with 0 being silent # All information goes to the syslog. debuglevel 1 # The user name you have for your BPA account username ** # Your BPA password password *** # The default auth server is dce-server You can override this value, but # you would only do this if you have not set your default domain correctly # in your /etc/resolv.conf #authserver dce-server # You can override the default domain if you have your # resolv.conf set to not include the BPA domains. #authdomain vic.bigpond.net.au # The loginprog will be executed whenever BPALogin connects successfully # you could have it run a script to start a firewall, etc. The first # parm to the program will be the port number #connectedprog /etc/rc.d/rc.masq #disconnectedprog /etc/rc.d/rc.masq # If you want to bind BPALogin to a specific address rather than all # sockets, you can do that here. #localaddress 10.1.2.0 # You can now define the listen port instead of a random port # This will help with firewalls. #localport 5050 # Logging can be sent to syslog or sysout. #logging sysout # Set the minimum heartbeat interval. This can protect against # DoS attacks. minheartbeatinterval 60 then cd rc3.d ln -s ../bplogin S100bplogin cd ../rc5.d ln -s ../bplogin S100bplogin that should cause it to be run whenever you enter runlevel 3 or 5 -- Keith Antoine, 18 Arkana St, The Gap, Queensland 4061 Australia PH:61733002161 Retired Geriatric, Sometime Electronics Engineer, Knowall, Brain in storage ___ Linux-users mailing list Archives, Digests, etc at http://linux.nf/mailman/listinfo/linux-users
Re: suse 7.2 7.3
On October 24, 2001 04:14 pm, Keith Antoine wrote: No as I installed it on 3 other machines also I tried both the cd and dvd neither worked. Is this by chance the 7.3 upgrade as opposed to a full install? (Perhaps I missed that). If so, according to the SuSE list there are known issues with it (there have been a number of threads discussing this). Apparently, like Caldera, SuSE's upgrade install programs are invariably a challenge. Most of the seasoned SuSE users recommend getting the full version, backing up your data, then doing a full fresh install from scratch. Sad, really, that we have come so far over the past few years in Linux - we can run it as superclusters and in mainframes - but we can't seem to get consistently fool-proof OS upgrades. -- burns ___ Linux-users mailing list Archives, Digests, etc at http://linux.nf/mailman/listinfo/linux-users
Re: suse 7.2 7.3
Douglas J Hunley wrote: I've no idea what th problem here is, but I too am worried. Yours sounds a lot like the system I have here I wanted to put 7.3 on when it shows up. When it does hang, can you look in the alternate TTY's to see what was happening when it froze? 7.2 went on my Athlon 800 w/ 256Mb DDR no problems... was there anything in SuSE archives? Well that tells me that its not the DDR ram, one down. Had no luck at the archives as I also have had no luck getting Suse to answer me. Now does anyone have suse up with one of the lastest athlons? Where is it checking when it does the 'system check' and especially where is it at 50% ? However since I wrote this and it bounced I have done the F2 text install: It starts and completes a H/W detection, so thats fine. Searches for infofile and Braille display find both I guess as it does not complain.States tha H/W probing finished, starts YAST1 then initialises YAST2 checks system up to 40% then on screen comes: sh: -c: line 1: unexpected EOF while looking for `' sh: -c: line 2: syntax error. unexpected end of file Now AFAIK this only occurs with script files; I am guessing that as 7.1 goes on fine, that something in a script file that has changed from version 7.1 is stuffing up. Is this a reasonable assumption ?? -- - To those who have been in harms way, to those that have made the sacrifice in humanities name. At the going down of the sun and in the morning I shall remember them. - Keith Antoine aka skippy 18 Arkana St The Gap Queensland 4061 Australia PH 16 7 33002161 Retired Geriatric and Sometime Electronics Engineer : Knowall ___ Linux-users mailing list Archives, Digests, etc at http://linux.nf/mailman/listinfo/linux-users
Re: suse 7.2 7.3
On Tue, 23 Oct 2001 14:10:25 -0400 Keith Antoine [EMAIL PROTECTED] wrote: Douglas J Hunley wrote: I've no idea what th problem here is, but I too am worried. Yours sounds a lot like the system I have here I wanted to put 7.3 on when it shows up. When it does hang, can you look in the alternate TTY's to see what was happening when it froze? 7.2 went on my Athlon 800 w/ 256Mb DDR no problems... was there anything in SuSE archives? Well that tells me that its not the DDR ram, one down. Had no luck at the archives as I also have had no luck getting Suse to answer me. Now does anyone have suse up with one of the lastest athlons? Where is it checking when it does the 'system check' and especially where is it at 50% ? However since I wrote this and it bounced I have done the F2 text install: It starts and completes a H/W detection, so thats fine. Searches for infofile and Braille display find both I guess as it does not complain.States tha H/W probing finished, starts YAST1 then initialises YAST2 checks system up to 40% then on screen comes: sh: -c: line 1: unexpected EOF while looking for `' sh: -c: line 2: syntax error. unexpected end of file Now AFAIK this only occurs with script files; I am guessing that as 7.1 goes on fine, that something in a script file that has changed from version 7.1 is stuffing up. Is this a reasonable assumption ?? Keith, Is it possible your install media is fubared, ie you need a replacement cdrom? -- Collins Richey Denver Area gentoo_rc6 xfce+sylpheed ___ Linux-users mailing list Archives, Digests, etc at http://linux.nf/mailman/listinfo/linux-users
Re: suse 7.2 7.3
On October 20, 2001 01:04 am, you wrote: I have installed on other systems but the main difference being that I have a MB with ddr ram and an Athlon 1.4 bought just recently; 10 days ago, probably the C version. Does anyone know if this could be the answer and does 7.3 address this? This is just casting on dark waters and hope someone can help. I have five machines here with W3.1 (just upgraded the server). I had 3.1 balk on a couple of rhe machines, an AMD 750 Duron and an Intel P3-866. I keep a Mystique video card as a test card that I use whenever an install fails during hardware probing. In most cases the install continues flawlessly when I use the test card. Once I've completed the install I then (in run level 3) manually configure X to reflect the card I intend to use. The biggest culprit has been the ATI Rage Fury Pro. But once I've manually set things up all runs just fine. -- Ted Ozolins (VE7TVO) Westbank, BC ___ Linux-users mailing list Archives, Digests, etc at http://linux.nf/mailman/listinfo/linux-users
Re: SuSE 7.2 Pro
Douglas J. Hunley wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 is up on http://hunley.homeip.net/iso Which discs are *needed* and which are optional? ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc -http://linux.nf/mailman/listinfo/linux-users
Re: SuSE 7.2 Pro
On Friday 06 July 2001 08:30 am, Ian Marchak wrote: Douglas J. Hunley wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 is up on http://hunley.homeip.net/iso Which discs are *needed* and which are optional? It depends which apps you want. They have included everything including the kitchen sink. When you run the graphical install on disk #1 and select the various apps you want (you can get really specific or select big blocks of stuff), the install proceeds, asking you for one CD after the other. And because YaST seems to know which disks are in the machine, it might be a big pain to try and sort it out to make a kind-of one disk fits all iso. -- Tony Alfrey [EMAIL PROTECTED] I'd rather be sailing ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc -http://linux.nf/mailman/listinfo/linux-users
Re: Suse 7.2, my 2 cents
At 18:30 01/07/2001 -0400, you wrote: snip If anyone is still reading, something crossed my mind for the SxS. I wrote up three pages of 'quick hints for a really newbie' user of Linux for her to use and I was wondering if anyone has an interest in this for the SxS. What I really would like is input from people as to things that are needed in such a document but perhaps I should put the 'outline' of what I put in mine first. The doc would only cover using Linux, not the install or technical stuff and would probably be KDE oriented. Any interest? *** Count me in, but I'll need time to go through your previous posts about this subject and get my boxes running. I have been testing stuff a lot lately and have to get things straight here. Cheers, Zoran. ___ http://linux.nf -- [EMAIL PROTECTED] Archives, Subscribe, Unsubscribe, Digest, Etc -http://linux.nf/mailman/listinfo/linux-users
