MPC8568MDS RAMDISK Problem
Hi: ram0: rw=0, want=1345772050, limit=100, this error cause by Device Drivers-block device- ramdisk size make ramdisk size bigger regards:) yanlong ___ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
How to use ttyUL0 as input and use VGA as display?
Hi, I port the linux on my ml300 board , the system is work well. But have some small problem. I want use serial port as input device and use VGA as display. How i set the console parameter? If i set console like this console=ttyUL0,9600 console=tty0 root=/dev/ram. The boot message display on both of serial port and VGA. But when the system come to the sh.There is no output on ttyUL0 ,.All message display on the VGA , then Ｉcann't input command by serial port . How to slove this probelm? regards:) yanlong ___ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
use plb_tft_cntlr_ref_d meet the problem
Has anybody add the plb_tft_cntlr_ref to the desgin ? I add the pcores whcih copy from slideshow which is a reference desgin. Something is wrong. I show the image in my design , the plb_tft_cntlr_ref ip core is works ,but it not work very well . The image shows in the lcd is fuzzy. The problem is not the software , beacause it use some software as reference desgin. The image in the reference desgin is clear，but it fuzzy in my design .Why ??? Many Thanks ___ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
How to use ramdisk on the ml300?
If i want use ramdisk on the ml300 , i must use u-boot in my system ? many thanks ___ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
Re: ppc-linux still not booting on my virtexII board
Hi , guys , i meet the same problem as yours . when it into the early_init(), the system was hang up . I see your solution , but i don't known it clearly . Can you tell me detailly ??? Why it happened and the solution . Waiting for your reply , thank you :) Hi, * (...)arch/ppc/boot/simple/embed_config.c * Oops, I skipped that code because my bootloader executes the uncompressed kernel image (loaded at 0x) without doing that stuff in the first place. All right ;) Thanks again, Patrick ___ Linuxppc-embedded mailing list Linuxppc-embedded@ozlabs.org https://ozlabs.org/mailman/listinfo/linuxppc-embedded
