Re: Italian Documentation Page
"claudio" == claudio [EMAIL PROTECTED] writes: claudio Hello people, I prepared the unofficial Italian Documentation claudio Page, its URL is http://www.geocities.com/lacocio/lyx.html claudio Check it (especially if you would like to start claudio traslation of some part of documentation, there's a lot to claudio do) Hello Claudio, I tried to access the page, but it is not found... JMarc I made some serarches and found: http://www.geocities.com/Paris/Lights/8645/documenti/lyx.html I don't' know if it's the right one or an old mirror, but it seems ok. Emanuele
Out of memory error on figure insert
Hi I have picked up some sort of problem. When I try to insert an eps figure, LyX crashes, leaving me with the error "out of memory" on the console. This is not a memory problem on the machine. I get the same error with lyx-1.1.3 and 1.1.4pre1, both installed from the RPMs on RH6.1. Henk Henk Coetzee Geophysics Unit Council for Geoscience Private Bag X112, Pretoria, 0001, South Africa Tel: +27-12-841-1192 Fax: +27-12-841-1424
Re: Out of memory error on figure insert
"Henk" == Henk Coetzee [EMAIL PROTECTED] writes: Henk Hi I have picked up some sort of problem. When I try to insert Henk an eps figure, LyX crashes, leaving me with the error "out of Henk memory" on the console. This is not a memory problem on the Henk machine. I get the same error with lyx-1.1.3 and 1.1.4pre1, both Henk installed from the RPMs on RH6.1. We have fixed recently a memory allocation problem in the figure inset. Please try again when the next 1.1.4 prerelease is out. JMarc
Re: Prerelease LyX 1.1.4pre2
Hi all, This is my traditional followup to new LyX pre-releases or releases. The RPMS for Redhat 6.X are on ftp.sylvan.com. The full paths: ftp://ftp.sylvan.com/pub/lyx/lyx-1.1.4pre2-1.i386.rpm ftp://ftp.sylvan.com/pub/lyx/tetex-lyx-1.1.4pre2-1.i386.rpm The source RPM is at: ftp://ftp.sylvan.com/pub/lyx/lyx-1.1.4pre2-1.src.rpm These were built on my stock Redhat 6.1 Pentium III Dell Inspiron 7500 Laptop. It's very very fast! Compiles LyX in about 5 minutes!!! I am running these RPMs on my Redhat 6.0 Pentium without any problems. Email me if you have any problems and I can regenerate the RPMs the old-fashioned (slow) way. ---Kayvan On Thu, Jan 20, 2000 at 04:25:57AM +0100, Lars Gullik Bjønnes wrote: Hello again, We have come a lot further in our rewriting to use more modern C++, it seems that most compiler issues have been resolved so far. Some huge internal changes has been made: switch to use C++ iostreams all over. Much more use of std::containers. Several bugfixes. Some code has been simplified. There are no particular new features, but several minor ones: - better display of accented chars (needs some work) - possible to read _old_ tabular format. (albeit without format-info - don't continue scrolling after key has been released. - allow spaces around cursor so that editing and cut/paste/copy is more convenient. (This needs testing, but seems to work as it should.) Even if 1.1.4pre2 is beginning to look stable it has a lot of code that has not been tested throughly so you should be sure to make backups of important documents before trying it out. Still we need testers... please report all problems to [EMAIL PROTECTED] Get the prerelease at: ftp://ftp.lyx.org/pub/lyx/devel/lyx-1.1.4.tar.gz ftp://ftp.devel.lyx.org/pub/lyx/lyx-1.1.4.tar.gz Lgb -- Kayvan A. Sylvan | Proud husband of | Father to my kids: Sylvan Associates, Inc.| Laura Isabella Sylvan | Katherine Yelena http://www.successlinks.com/kayvan | Reach your goals now! | Robin Gregory
Prerelease LyX 1.1.4pre2
Hello again, We have come a lot further in our rewriting to use more modern C++, it seems that most compiler issues have been resolved so far. Some huge internal changes has been made: switch to use C++ iostreams all over. Much more use of std::containers. Several bugfixes. Some code has been simplified. There are no particular new features, but several minor ones: - better display of accented chars (needs some work) - possible to read _old_ tabular format. (albeit without format-info - don't continue scrolling after key has been released. - allow spaces around cursor so that editing and cut/paste/copy is more convenient. (This needs testing, but seems to work as it should.) Even if 1.1.4pre2 is beginning to look stable it has a lot of code that has not been tested throughly so you should be sure to make backups of important documents before trying it out. Still we need testers... please report all problems to [EMAIL PROTECTED] Get the prerelease at: ftp://ftp.lyx.org/pub/lyx/devel/lyx-1.1.4.tar.gz ftp://ftp.devel.lyx.org/pub/lyx/lyx-1.1.4.tar.gz Lgb
updated lyx.pot and po files
[Also sent to the lyx mailing lists] Hello, You get this mail since you are listed as "Last-Translator" in one of the po files distributed with LyX. We are now getting closer to a new stable release and a lot of the po files have not been updated for some time. We hope to get most of the po files updated before that release, hopefully you will be able to help out. To make things easier I have put all the updated (i.e. merged with lyx.pot) po files and the current lyx.pot file at: ftp://ftp.devel.lyx.org/pub/lyx/po-files/ You can also get the files from the distribution: ftp://ftp.devel.lyx.org/pub/lyx/lyx-1.1.4pre2.tar.gz You don't have to touch the lyx.pot file unless you want to, and update of the lang.po files is more than enough. Please send updated po files to the devel list: [EMAIL PROTECTED] or to me [EMAIL PROTECTED] Lgb
Re: Italian Documentation Page
"claudio" == claudio [EMAIL PROTECTED] writes: claudio Hello people, I prepared the unofficial Italian Documentation claudio Page, its URL is http://www.geocities.com/lacocio/lyx.html claudio Check it (especially if you would like to start claudio traslation of some part of documentation, there's a lot to claudio do) Hello Claudio, I tried to access the page, but it is not found... JMarc I made some serarches and found: http://www.geocities.com/Paris/Lights/8645/documenti/lyx.html I don't' know if it's the right one or an old mirror, but it seems ok. Emanuele
Out of memory error on figure insert
Hi I have picked up some sort of problem. When I try to insert an eps figure, LyX crashes, leaving me with the error "out of memory" on the console. This is not a memory problem on the machine. I get the same error with lyx-1.1.3 and 1.1.4pre1, both installed from the RPMs on RH6.1. Henk Henk Coetzee Geophysics Unit Council for Geoscience Private Bag X112, Pretoria, 0001, South Africa Tel: +27-12-841-1192 Fax: +27-12-841-1424
Re: Out of memory error on figure insert
"Henk" == Henk Coetzee [EMAIL PROTECTED] writes: Henk Hi I have picked up some sort of problem. When I try to insert Henk an eps figure, LyX crashes, leaving me with the error "out of Henk memory" on the console. This is not a memory problem on the Henk machine. I get the same error with lyx-1.1.3 and 1.1.4pre1, both Henk installed from the RPMs on RH6.1. We have fixed recently a memory allocation problem in the figure inset. Please try again when the next 1.1.4 prerelease is out. JMarc
Re: Prerelease LyX 1.1.4pre2
Hi all, This is my traditional followup to new LyX pre-releases or releases. The RPMS for Redhat 6.X are on ftp.sylvan.com. The full paths: ftp://ftp.sylvan.com/pub/lyx/lyx-1.1.4pre2-1.i386.rpm ftp://ftp.sylvan.com/pub/lyx/tetex-lyx-1.1.4pre2-1.i386.rpm The source RPM is at: ftp://ftp.sylvan.com/pub/lyx/lyx-1.1.4pre2-1.src.rpm These were built on my stock Redhat 6.1 Pentium III Dell Inspiron 7500 Laptop. It's very very fast! Compiles LyX in about 5 minutes!!! I am running these RPMs on my Redhat 6.0 Pentium without any problems. Email me if you have any problems and I can regenerate the RPMs the old-fashioned (slow) way. ---Kayvan On Thu, Jan 20, 2000 at 04:25:57AM +0100, Lars Gullik Bjønnes wrote: Hello again, We have come a lot further in our rewriting to use more modern C++, it seems that most compiler issues have been resolved so far. Some huge internal changes has been made: switch to use C++ iostreams all over. Much more use of std::containers. Several bugfixes. Some code has been simplified. There are no particular new features, but several minor ones: - better display of accented chars (needs some work) - possible to read _old_ tabular format. (albeit without format-info - don't continue scrolling after key has been released. - allow spaces around cursor so that editing and cut/paste/copy is more convenient. (This needs testing, but seems to work as it should.) Even if 1.1.4pre2 is beginning to look stable it has a lot of code that has not been tested throughly so you should be sure to make backups of important documents before trying it out. Still we need testers... please report all problems to [EMAIL PROTECTED] Get the prerelease at: ftp://ftp.lyx.org/pub/lyx/devel/lyx-1.1.4.tar.gz ftp://ftp.devel.lyx.org/pub/lyx/lyx-1.1.4.tar.gz Lgb -- Kayvan A. Sylvan | Proud husband of | Father to my kids: Sylvan Associates, Inc.| Laura Isabella Sylvan | Katherine Yelena http://www.successlinks.com/kayvan | Reach your goals now! | Robin Gregory
Prerelease LyX 1.1.4pre2
Hello again, We have come a lot further in our rewriting to use more modern C++, it seems that most compiler issues have been resolved so far. Some huge internal changes has been made: switch to use C++ iostreams all over. Much more use of std::containers. Several bugfixes. Some code has been simplified. There are no particular new features, but several minor ones: - better display of accented chars (needs some work) - possible to read _old_ tabular format. (albeit without format-info - don't continue scrolling after key has been released. - allow spaces around cursor so that editing and cut/paste/copy is more convenient. (This needs testing, but seems to work as it should.) Even if 1.1.4pre2 is beginning to look stable it has a lot of code that has not been tested throughly so you should be sure to make backups of important documents before trying it out. Still we need testers... please report all problems to [EMAIL PROTECTED] Get the prerelease at: ftp://ftp.lyx.org/pub/lyx/devel/lyx-1.1.4.tar.gz ftp://ftp.devel.lyx.org/pub/lyx/lyx-1.1.4.tar.gz Lgb
updated lyx.pot and po files
[Also sent to the lyx mailing lists] Hello, You get this mail since you are listed as "Last-Translator" in one of the po files distributed with LyX. We are now getting closer to a new stable release and a lot of the po files have not been updated for some time. We hope to get most of the po files updated before that release, hopefully you will be able to help out. To make things easier I have put all the updated (i.e. merged with lyx.pot) po files and the current lyx.pot file at: ftp://ftp.devel.lyx.org/pub/lyx/po-files/ You can also get the files from the distribution: ftp://ftp.devel.lyx.org/pub/lyx/lyx-1.1.4pre2.tar.gz You don't have to touch the lyx.pot file unless you want to, and update of the lang.po files is more than enough. Please send updated po files to the devel list: [EMAIL PROTECTED] or to me [EMAIL PROTECTED] Lgb
Re: Italian Documentation Page
> > "claudio" == claudio <[EMAIL PROTECTED]> writes: > > claudio> Hello people, I prepared the unofficial Italian Documentation > claudio> Page, its URL is http://www.geocities.com/lacocio/lyx.html > claudio> Check it (especially if you would like to start > claudio> traslation of some part of documentation, there's a lot to > claudio> do) > > Hello Claudio, > > I tried to access the page, but it is not found... > > JMarc I made some serarches and found: http://www.geocities.com/Paris/Lights/8645/documenti/lyx.html I don't' know if it's the right one or an old mirror, but it seems ok. Emanuele
Out of memory error on figure insert
Hi I have picked up some sort of problem. When I try to insert an eps figure, LyX crashes, leaving me with the error "out of memory" on the console. This is not a memory problem on the machine. I get the same error with lyx-1.1.3 and 1.1.4pre1, both installed from the RPMs on RH6.1. Henk Henk Coetzee Geophysics Unit Council for Geoscience Private Bag X112, Pretoria, 0001, South Africa Tel: +27-12-841-1192 Fax: +27-12-841-1424
Re: Out of memory error on figure insert
> "Henk" == Henk Coetzee <[EMAIL PROTECTED]> writes: Henk> Hi I have picked up some sort of problem. When I try to insert Henk> an eps figure, LyX crashes, leaving me with the error "out of Henk> memory" on the console. This is not a memory problem on the Henk> machine. I get the same error with lyx-1.1.3 and 1.1.4pre1, both Henk> installed from the RPMs on RH6.1. We have fixed recently a memory allocation problem in the figure inset. Please try again when the next 1.1.4 prerelease is out. JMarc
Re: Prerelease LyX 1.1.4pre2
Hi all, This is my traditional followup to new LyX pre-releases or releases. The RPMS for Redhat 6.X are on ftp.sylvan.com. The full paths: ftp://ftp.sylvan.com/pub/lyx/lyx-1.1.4pre2-1.i386.rpm ftp://ftp.sylvan.com/pub/lyx/tetex-lyx-1.1.4pre2-1.i386.rpm The source RPM is at: ftp://ftp.sylvan.com/pub/lyx/lyx-1.1.4pre2-1.src.rpm These were built on my stock Redhat 6.1 Pentium III Dell Inspiron 7500 Laptop. It's very very fast! Compiles LyX in about 5 minutes!!! I am running these RPMs on my Redhat 6.0 Pentium without any problems. Email me if you have any problems and I can regenerate the RPMs the old-fashioned (slow) way. ---Kayvan On Thu, Jan 20, 2000 at 04:25:57AM +0100, Lars Gullik Bjønnes wrote: > > Hello again, > > We have come a lot further in our rewriting to use more modern C++, it > seems that most compiler issues have been resolved so far. > > Some huge internal changes has been made: switch to use C++ iostreams > all over. Much more use of std::containers. Several bugfixes. > > Some code has been simplified. > > There are no particular new features, but several minor ones: > > - better display of accented chars (needs some work) > - possible to read _old_ tabular format. (albeit without > format-info > - don't continue scrolling after key has been released. > - allow spaces around cursor so that editing and > cut/paste/copy is more convenient. (This needs testing, but > seems to work as it should.) > > Even if 1.1.4pre2 is beginning to look stable it has a lot of code > that has not been tested throughly so you should be sure to make > backups of important documents before trying it out. Still we need > testers... please report all problems to [EMAIL PROTECTED] > > Get the prerelease at: > > ftp://ftp.lyx.org/pub/lyx/devel/lyx-1.1.4.tar.gz > ftp://ftp.devel.lyx.org/pub/lyx/lyx-1.1.4.tar.gz > > Lgb -- Kayvan A. Sylvan | Proud husband of | Father to my kids: Sylvan Associates, Inc.| Laura Isabella Sylvan | Katherine Yelena http://www.successlinks.com/kayvan | Reach your goals now! | Robin Gregory
Prerelease LyX 1.1.4pre2
Hello again, We have come a lot further in our rewriting to use more modern C++, it seems that most compiler issues have been resolved so far. Some huge internal changes has been made: switch to use C++ iostreams all over. Much more use of std::containers. Several bugfixes. Some code has been simplified. There are no particular new features, but several minor ones: - better display of accented chars (needs some work) - possible to read _old_ tabular format. (albeit without format-info - don't continue scrolling after key has been released. - allow spaces around cursor so that editing and cut/paste/copy is more convenient. (This needs testing, but seems to work as it should.) Even if 1.1.4pre2 is beginning to look stable it has a lot of code that has not been tested throughly so you should be sure to make backups of important documents before trying it out. Still we need testers... please report all problems to [EMAIL PROTECTED] Get the prerelease at: ftp://ftp.lyx.org/pub/lyx/devel/lyx-1.1.4.tar.gz ftp://ftp.devel.lyx.org/pub/lyx/lyx-1.1.4.tar.gz Lgb
updated lyx.pot and po files
[Also sent to the lyx mailing lists] Hello, You get this mail since you are listed as "Last-Translator" in one of the po files distributed with LyX. We are now getting closer to a new stable release and a lot of the po files have not been updated for some time. We hope to get most of the po files updated before that release, hopefully you will be able to help out. To make things easier I have put all the updated (i.e. merged with lyx.pot) po files and the current lyx.pot file at: ftp://ftp.devel.lyx.org/pub/lyx/po-files/ You can also get the files from the distribution: ftp://ftp.devel.lyx.org/pub/lyx/lyx-1.1.4pre2.tar.gz You don't have to touch the lyx.pot file unless you want to, and update of the .po files is more than enough. Please send updated po files to the devel list: [EMAIL PROTECTED] or to me [EMAIL PROTECTED] Lgb
