Re: updating the latex distro using cygwin
Francesco <[EMAIL PROTECTED]> writes: > I tried to install lyx on my pc (which is running windows xp sp2) but I didn't > succeed for the notorious "no textclasses found" problem. I then tried to > install it using cygwin and everything went fine. I have now another problem: > I need to use the IEEEtrans.cls for producing the output of my file but it is > not available in the standard distribution. In Windows I could run the miktek > update manager (which has a very nice GUI) and download the missing package. > How > can I do the same thing in cygwin? I simply need to "add" the IEEEtrans.cls to > my latex distro that is under cygwin but I have no idea how to do that. > Can anyone help? I would really appreciate it. Using a cygwin shell create the following directories ($ is the shell prompt): $ mkdir -p /usr/local/share/texmf/tex/latex/ieeetran $ mkdir -p /usr/local/share/texmf/bibtex/bst/ieeetran Download IEEEtran.cls, IEEEtran.bst, and IEEEtranS.bst from http://tug.ctan.org/tex-archive/macros/latex/contrib/IEEEtran/ Put IEEEtran.cls into /usr/local/share/texmf/tex/latex/ieeetran/ Put the .bst files into /usr/local/share/texmf/bibtex/bst/ieeetran/ Run texhash: $ texhash Test if it worked: $ kpsewhich IEEEtran.cls /usr/local/share/texmf/tex/latex/ieeetran/IEEEtran.cls However, note that you can also use miktex, so you could uninstall the cygwin tetex and install it in its place (remember to reconfigure lyx through Tools->Reconfigure if you do so). As a last note, if you installed the official cygwin version of LyX and don't see the math symbols, you may have to perform the actions listed here: http://www.mail-archive.com/lyx-users%40lists.lyx.org/msg52067.html This is not necessary if you installed this package: ftp://ftp.lyx.org/pub/lyx/bin/1.4.3/lyx-1.4.3-cygwin.tar.gz HTH -- Enrico
updating the latex distro using cygwin
Hi, I tried to install lyx on my pc (which is running windows xp sp2) but I didn't succeed for the notorious "no textclasses found" problem. I then tried to install it using cygwin and everything went fine. I have now another problem: I need to use the IEEEtrans.cls for producing the output of my file but it is not available in the standard distribution. In Windows I could run the miktek update manager (which has a very nice GUI) and download the missing package. How can I do the same thing in cygwin? I simply need to "add" the IEEEtrans.cls to my latex distro that is under cygwin but I have no idea how to do that. Can anyone help? I would really appreciate it. Thanks and regards Francesco
Re: Ÿ without ERT (\"Y)?
Thanks for all your help! >> I've set latin1 inputenc in the latex preamble and I see Ÿ in the >> LyX-file and in the pdf output using 1.4.3-5. How does that happen? >> > > Small or capital Ÿ? The small one is both in latin1 and latin9, the capital > one only in latin9. > If you really mean capital Ÿ: This should only happen if you copied the > first Ÿ from my file. The second one should not work with latin1. It's capital but with " instead of the dots. It look exactly like in the first line of the document you send and it looks exactly the same in the output file like Ÿ. >> If yes, is there any way to make sure the settings in the latex >> preamble are used? >> > > If you mean the user defined latex preamble that you can enter in LyX: THis > one never replaces the LyX generated preamble, it is always used in > addition. Just look at the generated .tex file. > just to make sure: the only way to change the LyX generated preamble is to use the gui and if there are options missing I cannot change them - right? (Really just because I'm curious) Toby
Re: OpenOffice vs. LyX
On 26 Jan, 2007, at 11:46 AM, John Kane wrote: As a new LyX user I cannot comment for sure but I do think that LyX does look superiour for books and large reports but for other works (say anything under 8-10 pages and that does not need a lot of math I'd still go with OOo. I'd have to disagree.Unfortunately LyX is still behind the curve in the area of big project management (books, manuals, etc). But it is close to perfect, I think, for any document from 0 pages to chapter-length as long as complex layouts are not required (i.e. multicolumnns with pictures and tables, etc.). Framemaker is still way ahead (from the writer's perspective---FM's typography is not so great).Too bad they killed it for Mac and never really marketed it for Linux. Besides, Framemaker may even die soon, given Adobe's massive investment in InDesign, and its format is not really open. But LyX is getting better, and version 1.5 looks very promising on the long document front. S. __ Stefano Franchi Department of Philosophy Ph: (64) 9 373-7599 x83940 University Of Auckland Fax: (64) 9 373-8768 Private Bag 92019 [EMAIL PROTECTED] Auckland New Zealand
LyX wiki | Examples / AcmSigplan --> Problem with citations
Hi I followed the steps indicated under : http://wiki.lyx.org/Examples/AcmSigplan I installed / reconfigured LyX and can open my article in the new ACM class; fine. The problem I encounter is when I include citations. I run into errors; here is an example of the error messages I get for each citation : -- "Use of [EMAIL PROTECTED] doesn't match its definition. of Todd and Latham \cite{ ToddLathamEvoArt} and on the other hand, If you say, e.g., `\def\a1{...}', then you must always put `1' after `\a', since control sequence names are made up of letters only. The macro here has not been followed by the required stuff, so I'm ignoring it." - I had no such problem when using the plain article class. Any idea what the above means? I am running LyX 1.3.7 under Ubuntu. Regards, Frederic -- Prof. Frederic Fol Leymarie Computing Dept., Goldsmiths College http://www.doc.gold.ac.uk/~ffl/ Tel: +44 (0)20 7078 5052
Re: OpenOffice vs. LyX
--- deedee <[EMAIL PROTECTED]> wrote: > I like LyX for complex documents because I can set a > document up > and not have to worry about the fact that so many > people who > claim to understand how to use styles don't bother > to use them > with any consistency in practice with any word > processing > software. Then there are those who have never heard of styles and tend to use even a word processor as nothing more than an electronic typewriter. I can remember some consulting proposal deadlines where we needed to get a half-dozen CV's into a standard format. It was faster to have them reentered than try to figure out what all the spaces were doing (tabs were too sophisticated). At least the CV's were not in Excel which I have seen. > > On Thursday 25 January 2007 09:37 am, John Kane > wrote: > > Beats me but there are quite a few books out there > > done with OOo including the collaboratively > written > > OOo documentation based on a well constructed > template > > and well defined styles. > > I think "a well constructed template and well > defined styles" explains it. In this case the styles and the minimal but useful style guide was put together by a professional technical writer who had already used OOo for other work. >I've been using word processing > software for literally a couple of decades, and >frankly, the worst piece of > engineering garbage that I've ever had the > misfortune to use was > MS Word. Even OOo Writer 1.0 ran circles around it > (all released > versions of MS Word) for features and stability. > Most of the > "features" people claim are in MS Word that aren't > in OOo Writer > are really 3rd-party applications (and pricey ones > at that). Only > the grammar checker and visual basic that were in MS > Word were > not in OOo Writer 1.0. OOo Writer 2.0 is light-years > ahead of MS > Word (even with the new "features" 2007 is supposed > to come > with). > > As someone else mentioned, you are likely to bring > over MS Word's > problems when you import the file into OOo Writer > and what you're > seeing are the problems that were in your MS Word > document. I have managed to import a number of Word docs with out a problem but some imports are just plain ornery and almost impossible to fix. Plain text is about the only way to do it. What I have found is that most OOo Writer docs export to Word quite well though I occasionally have had a problem with frames. As a new LyX user I cannot comment for sure but I do think that LyX does look superiour for books and large reports but for other works (say anything under 8-10 pages and that does not need a lot of math I'd still go with OOo. > Complex MS Word files almost never look the same on > two different > computers -- even when both computers have the exact > same release > of MS Word installed. This has been a constant > complaint for both > the people trying to provide finalized documents for > production > on MS Word systems other than their own and the > people receiving > those documents. This is why savvy MS Word users > always provide a > copy of the file in PDF so that the recipient can > see what the > file was actually supposed to look like. > > Check out the Authors' Guides for OOo -- there are > versions for > 1.0 and 2.0. Getting lists and such to be stable in > OOo Writer is > not a problem, assuming you set them up correctly > for what you > want and assuming you adequately cleaned up the MS > Word file and > templates you're working from. > > http://documentation.openoffice.org/manuals/index.html > > deedee > > -- > Registered Linux User #327485 > The Writer's Place, http://www.thewritersplace.com > WordStar Users Group, http://www.wordstar2.com > __ Do You Yahoo!? Tired of spam? Yahoo! Mail has the best spam protection around http://mail.yahoo.com
Re: Installing dvipost on Windows
Kurt Pernstich schrieb: does anybody know if and how it is possible to install dvipost on a Windows machine? It's installed together with LyX's Windows installer: http://wiki.lyx.org/Windows/Windows regards Uwe
Re: Comment on LyX Windows Install: the "textclasses not found" problem
Bradburn, Edward schrieb: I installed using the "network bundle" at first, but constantly got a problem with Lyx refusing to start: the now quite famous "textclasses not found" problem. More precisely, the programs refuses to start and prints this as the error: LyXTextClassList::Read: no textclasses found! This was obviously something to do with the Tex installation: although I installed MikTex as part of the bundle, Lyx was somehow not finding it. As it started, it tried to download missing textclasses but then bombed out with an error. I investigated o lot why this doesn't occur with my LyX installer: http://wiki.lyx.org/Windows/LyXWinInstaller I found now out why but don't know exactly why this happens: When MiKTeX is installed together with LyX it refreshes some environment variables. Unfortunately these changes need some time until they are recognized by the Windows system: You either have to read the changed variables to get them refreshed or have to relogin to Windows. Without beeing aware of this my installer calls LyX's configure script while the installer is running - this run mostly fails for the explained reason but reads out the environment variables so they are then refreshed (that's the run after my installer informs you that the following configuration may need some time). When LyX is first started the configure script runs again and this time it finds MiKTeX and so you don't get the error and LyX is successfully configured. This one was very tricky to find it out, I needed 3 months and lots and lots of installation tests to have the right idea :-(. (Note: some other posters have suggested running the "configure.py" script located in the Lyx directory, under the subdirectory "Resources". This did NOT work for me: the configure script tried to load the (what it thought were) missing Tex classes and crashed whilst doing so with the above message.) This is known MiKTeX bug we are working on. Workaround: Turn on an internet connection and then reconfigure LyX. regards Uwe
Re: Comment on Lyx Windows Install: the "textclasses not found" problem
Thomas Sauter wrote: it still doesn't work here. I deinstalled lyx and miktex, then installed miktex (c:\MiKTeX25) from the miktex-website (basic), then lyx (c:\Lyx14) (not the bundle and in a second try after deinstallation: miktex and the lyx-bundle). I changed the path to C:\MiKTeX25\miktex\bin;c:\programme\imagemagick-6.3.0-q16; C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\wbem; C:\Programme\MATLAB71\bin\win32;;C:\Programme\OpenSSH\bin; C:\Programme\QuickTime\QTSystem\ I run the configure.py. What output does this produce? Also, when you deinstalled LyX, did you also delete anything it created under C:\Documents and Settings\your id\Application Data? /Paul
Re: Ÿ without ERT (\"Y)?
Tobias Krause wrote: > I've set latin1 inputenc in the latex preamble and I see Ÿ in the > LyX-file and in the pdf output using 1.4.3-5. How does that happen? Small or capital Ÿ? The small one is both in latin1 and latin9, the capital one only in latin9. If you really mean capital Ÿ: This should only happen if you copied the first Ÿ from my file. The second one should not work with latin1. > Do I > have to set the inputenc somewhere else to be sure it's really used? No. The \inputencoding setting of the .lyx file determines the encoding of the .tex file. > Does "\inputencoding default" in the lyx-file overwrite the latex > setting? No. \inputencoding default means that the inputenc package is not used, and you have to make sure yourself that all non-ascii characters work. > If yes, is there any way to make sure the settings in the latex > preamble are used? If you mean the user defined latex preamble that you can enter in LyX: THis one never replaces the LyX generated preamble, it is always used in addition. Just look at the generated .tex file. > Sorry, I just started using lyx and I'm not yet familiar to these > special issues but I'd like to know a little more so I don't need to ask > the next time ;-) > > BTW: how stable is 1.5 and what are the major differences (there seem to > quite a few). A beta is expected very soon, but it still has some known problems, so I would not yet use it for production work. For the differences to 1.4 see http://wiki.lyx.org/LyX/NewInLyX15. Georg
Re: Ÿ without ERT (\"Y)?
In a recent message <[EMAIL PROTECTED]>, Tobias Krause <[EMAIL PROTECTED]> wrote. Hi, is there a way to insert Ÿ without using the ERT \"Y? [...] Hello Tobias, on my Windows system Alt-0255 produces the little 'y' with the dots over the top and Alt-0159 produces the big 'y' with dots over the top, for example, hold down the Alt-key and type 0159 on the *number keypad*. This works out of the box for me, using the latest Windows alpha release with all of the default setting left intact. Very pretty PDFs. Regards, Nick. -- Nick Hopton and Anne Hopton Caversham, Reading, England <[EMAIL PROTECTED]>
Re: Ÿ without ERT (\"Y)?
Hi, > Georg> I attach a second file for copying. Note that I see the second > Georg> capital Ÿ as ¾ on screen. I don't know if that is a LyX bug or > Georg> a font problem, but the Postscript output is OK. > > 3/4 is what you should see in latin1. Only latin15 has Ÿ. > > > Yes I know. The problem is that the example file is in latin9 encoding, so I > really should see Ÿ (and I do see that in 1.5 with the same font settings, > and in the ps output of 1.4). 1.4 displays ¾, and that is simply wrong. It > is really time to get 1.5.0 finished :-) > I've set latin1 inputenc in the latex preamble and I see Ÿ in the LyX-file and in the pdf output using 1.4.3-5. How does that happen? Do I have to set the inputenc somewhere else to be sure it's really used? Does "\inputencoding default" in the lyx-file overwrite the latex setting? If yes, is there any way to make sure the settings in the latex preamble are used? Sorry, I just started using lyx and I'm not yet familiar to these special issues but I'd like to know a little more so I don't need to ask the next time ;-) BTW: how stable is 1.5 and what are the major differences (there seem to quite a few). Regards, Toby
Re: Section numbers in left margin?
Juergen Spitzmueller wrote: > Steve Litt wrote: > >> How do you know about all these packages? This is true for many on the list >> -- someone comes up with a need and you know exactly what package to use to >> accomplish it. Do you have all this memorized, or do you have a quick way of >> looking it up? Either way, how do you do it -- I want to do it too. >> > Several reasons. I use many of the packages (like enumitem) myself. I've > published quite a few books recently, and faced many of those questions there > myself. And I frequently follow the discussion on comp.text.tex and (German) > de.comp.text.tex (which both are good newsgroups, and googling their archives > often helps). > > Finally, another excellent resource is Robin Fairbairn's TUG FAQ: > http://www.tex.ac.uk/cgi-bin/texfaq2html?introduction=yes > A few more resources, besides the ones J"urgen mentioned: * The /LaTeX Companion/ both lists and documents many commonly used packages, including pretty much all of those that ship with standard distributions. I couldn't get along without it. * TeX distributions ship with a ton of documentation. Finding your way around it can be the tricky part. My distribution, tetex, ships with an index of all available documentation, at /usr/share/texmf/doc/helpindex.html. * The TeX Catalogue, at http://www.ctan.org/tex-archive/help/Catalogue/catalogue.html, is extremely comprehensive, and the topical index is incredibly helpful. (I should use it more.) * Subscribe to the CTAN announcements RSS feed, at http://rss.gmane.org/gmane.comp.tex.ctan.announce, and keep up-to-date with what packages are being added and updated. If you don't use RSS (and if not, why on earth not?), you can just read the blog at http://blog.gmane.org/gmane.comp.tex.ctan.announce. Cheers, Richard -- == Richard G Heck, Jr Professor of Philosophy Brown University http://bobjweil.com/heck/ == Get my public key from http://sks.keyserver.penguin.de Hash: 0x1DE91F1E66FFBDEC Learn how to sign your email using Thunderbird and GnuPG at: http://dudu.dyn.2-h.org/nist/gpg-enigmail-howto
Re: Another eps problem
>>To: lyx-users@lists.lyx.org >>From: "Miki Dovrat" <[EMAIL PROTECTED]> >>Subject: Re: Another eps problem >>Date: Fri, 26 Jan 2007 16:31:37 +0200 >> >>I tried other viewers - foxit on windows and kpdf (xpdf variant of KDE) on >>linux, and they both failed to print the file correctly, even when the file >>is made on a lyx 1.4.2 on Linux. So this wipes out problems with Acroread. The PDF is badly managed by the printer driver whatever the PDF viewer. >> >>Does that mean that the file itself (or the eps figures of Origin) is >>somehow non-standard, and only ghostview for some reason is able to handle >>it? >> >>Too many things changed since my wife successfully printed her thesis on lyx >>1.4.1 on Windows, with MikTex 2.4. We still have her original pdf, and it >>DOES NOT print the Origin figures correctly now, but it did before. >> >>I am really confused. Things seem to contradict. If anyone has anything >>other than sympathy, please share. I really need to get this fixed. First thing would be to be able to reproduce your problem. Can you downsize it to a minimal example with one problematic figure, and post the compressed lyx/graphic sources ? -- Jean-Pierre
Re: Ÿ without ERT (\"Y)?
Jean-Marc Lasgouttes wrote: >> "Georg" == Georg Baum >> <[EMAIL PROTECTED]> >> writes: > > Georg> I attach a second file for copying. Note that I see the second > Georg> capital Ÿ as ¾ on screen. I don't know if that is a LyX bug or > Georg> a font problem, but the Postscript output is OK. > > 3/4 is what you should see in latin1. Only latin15 has Ÿ. Yes I know. The problem is that the example file is in latin9 encoding, so I really should see Ÿ (and I do see that in 1.5 with the same font settings, and in the ps output of 1.4). 1.4 displays ¾, and that is simply wrong. It is really time to get 1.5.0 finished :-) Georg
Re: Another eps problem
I have on Windows Ghostscript 8.54 and ghostview 4.8. They came with the lyx 1.4.3-5 bundle. "Georg Baum" <[EMAIL PROTECTED]> wrote in message news:[EMAIL PROTECTED] > Miki Dovrat wrote: > >> After some playing around trying to answer Paul's and Georg's questions, >> I >> came up with these conclusions: >> >> My ghostview prints everything correctly - the eps's by themselves, the >> lyx ps and pdf (dvipdfm and pdftex) outputs. > > That either means that the eps generated by origin is correct, or that > ghostscript is tolerant enough to understand it. > >> Acrobat Reader (both versions 7.0.9 and 8) fail to print the figures >> correctly. >> >> Does Adobe not understand lyx pdf's the way ghostview does? I don't know >> who to blame, Adobe or the lyx conversions of eps to pdf, but I suspect >> the latter. >> >> It is a problem since the most wide-spread pdf viewer on windows is >> Acrobat, and if I give the document to someone I would like for them to >> be >> able to print it correctly. >> >> How can we be sure? > > We had a similar problem here some years ago. Certain lines of simple > figures (made with xfig) would not show up in the pdf with acroread, but > where fine in the ps file. > We never found out whether that was a problem of ghostscript producing > invalid pdf, or a problem of acroread not understanding the valid pdf that > ghostscript produced. The solution was to upgrade ghostscript (IIRC the > problematic version was 5.x or maybe 6.x). > > I suspect that in your case you see something similar. Either the > conversion > of the figure from eps to pdf (if you use pdflatex), or the conversion of > the whole document from ps to pdf (if you use latex) produces something > acroread can not understand. What version of ghostscript do you use? If it > is older, does an upgrade help? > > > Georg > >
Re: Another eps problem
I tried other viewers - foxit on windows and kpdf (xpdf variant of KDE) on linux, and they both failed to print the file correctly, even when the file is made on a lyx 1.4.2 on Linux. Does that mean that the file itself (or the eps figures of Origin) is somehow non-standard, and only ghostview for some reason is able to handle it? Too many things changed since my wife successfully printed her thesis on lyx 1.4.1 on Windows, with MikTex 2.4. We still have her original pdf, and it DOES NOT print the Origin figures correctly now, but it did before. I am really confused. Things seem to contradict. If anyone has anything other than sympathy, please share. I really need to get this fixed. Miki
Re: Another eps problem
Miki Dovrat wrote: > After some playing around trying to answer Paul's and Georg's questions, I > came up with these conclusions: > > My ghostview prints everything correctly - the eps's by themselves, the > lyx ps and pdf (dvipdfm and pdftex) outputs. That either means that the eps generated by origin is correct, or that ghostscript is tolerant enough to understand it. > Acrobat Reader (both versions 7.0.9 and 8) fail to print the figures > correctly. > > Does Adobe not understand lyx pdf's the way ghostview does? I don't know > who to blame, Adobe or the lyx conversions of eps to pdf, but I suspect > the latter. > > It is a problem since the most wide-spread pdf viewer on windows is > Acrobat, and if I give the document to someone I would like for them to be > able to print it correctly. > > How can we be sure? We had a similar problem here some years ago. Certain lines of simple figures (made with xfig) would not show up in the pdf with acroread, but where fine in the ps file. We never found out whether that was a problem of ghostscript producing invalid pdf, or a problem of acroread not understanding the valid pdf that ghostscript produced. The solution was to upgrade ghostscript (IIRC the problematic version was 5.x or maybe 6.x). I suspect that in your case you see something similar. Either the conversion of the figure from eps to pdf (if you use pdflatex), or the conversion of the whole document from ps to pdf (if you use latex) produces something acroread can not understand. What version of ghostscript do you use? If it is older, does an upgrade help? Georg
Re: Ÿ without ERT (\"Y)?
> "Georg" == Georg Baum <[EMAIL PROTECTED]> writes: Georg> I attach a second file for copying. Note that I see the second Georg> capital Ÿ as ¾ on screen. I don't know if that is a LyX bug or Georg> a font problem, but the Postscript output is OK. 3/4 is what you should see in latin1. Only latin15 has Ÿ. JMarc
Re: Comment on Lyx Windows Install: the "textclasses not found" problem
Hi Ed, > -- Install MikTex (from the site, www.miktex.org). I used the "basic" > version. > -- Install Lyx > > Oh, I'm using Win XP with SP 2, and running Lyx 1.4.3-5. > it still doesn't work here. I deinstalled lyx and miktex, then installed miktex (c:\MiKTeX25) from the miktex-website (basic), then lyx (c:\Lyx14) (not the bundle and in a second try after deinstallation: miktex and the lyx-bundle). I changed the path to C:\MiKTeX25\miktex\bin;c:\programme\imagemagick-6.3.0-q16; C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\system32\wbem; C:\Programme\MATLAB71\bin\win32;;C:\Programme\OpenSSH\bin; C:\Programme\QuickTime\QTSystem\ I run the configure.py. Miktex seems to work and also the path settings seem to be ok. I can run 'tex' from every directory from the command window. I also tried to use another directory with c -userdir ... Same bad result. Any ideas? Thomas
Create hyperlink in presentation (beamer) which launches program when clicked?
Hi Is it possible to insert into a document (class: beamer) a hyperlink via URL which launches a program? Thanks Rainer -- Rainer M. Krug, Dipl. Phys. (Germany), MSc Conservation Biology (UCT) Department of Conservation Ecology and Entomology University of Stellenbosch Matieland 7602 South Africa Tel:+27 - (0)72 808 2975 (w) Fax:+27 - (0)86 516 2782 Fax:+27 - (0)21 808 3304 (w) Cell: +27 - (0)83 9479 042 email: [EMAIL PROTECTED] [EMAIL PROTECTED]
Comment on Lyx Windows Install: the "textclasses not found" problem
Hi Folks, Just installed Lyx yesterday on Windows, and, since I had a bit of trouble getting it to run, I thought I would post a quick report of what got it working. I installed using the "network bundle" at first, but constantly got a problem with Lyx refusing to start: the now quite famous "textclasses not found" problem. More precisely, the programs refuses to start and prints this as the error: LyXTextClassList::Read: no textclasses found! This was obviously something to do with the Tex installation: although I installed MikTex as part of the bundle, Lyx was somehow not finding it. As it started, it tried to download missing textclasses but then bombed out with an error. However, after reading an earlier comment on the Lyx list, I found that installing MikText separately seemed to do the trick. So, this means: -- Install MikTex (from the site, www.miktex.org). I used the "basic" version. -- Install Lyx Run Lyx: works fine. Hope this helps someone to get started with the tool in Windows. (Note: some other posters have suggested running the "configure.py" script located in the Lyx directory, under the subdirectory "Resources". This did NOT work for me: the configure script tried to load the (what it thought were) missing Tex classes and crashed whilst doing so with the above message.) Oh, I'm using Win XP with SP 2, and running Lyx 1.4.3-5. Cheers, Ed Bradburn -- Edward Bradburn | Technical Editor CoreMedia | Ludwig-Erhard-Str. 18, 20459 Hamburg, Germany Tel +49 40.325587.535 | Fax +49.40.325587.999 [EMAIL PROTECTED] | www.coremedia.com --- Any Content, Anywhere, in a Trusted Universe: CoreMedia CMS and CoreMedia DRM ---
RE: Re: LyXTextClassList::Read: no textclasses found!
Hi Thomas, See my mail I sent to the list today -- have you tried installing MikTex *separately*, i.e. not with the bundle installer? That was the only thing that got Lyx working for me. Cheers, Ed Bradburn > -Original Message- > From: Thomas Sauter [mailto:[EMAIL PROTECTED] > Sent: Thursday, January 25, 2007 1:37 PM > To: lyx-users@lists.lyx.org > Subject: Re: Re: LyXTextClassList::Read: no textclasses found! > > I have exactly the same problem. > My home directory is not on a remote server and I tried the > manual reconfigure. But that didn't work. > It tells me that > tex\latex\IEEEtran\IEEEtran.cls is missing and that I should > install it. I do so. I get the same error. > > Any more ideas? > > Thank you in advance. > Thomas > > > > > -- > Dr. Thomas Sauter > > Systems Biology > Institute for System Dynamics > University of Stuttgart, Germany > http://www.isys.uni-stuttgart.de/~sauter/ > >
Installing dvipost on Windows
Hello everybody, does anybody know if and how it is possible to install dvipost on a Windows machine? Thanks a lot and best regards, Kurt link to dvipost: http://efeu.cybertec.at/index_en.html why do I need it: http://wiki.lyx.org/Tips/ChangeTrackingLyx1-3-2
Re: Ÿ without ERT (\"Y)?
Great! Now it works. You where right: I had two LyX instances... (This is where I realize I'm new a LyX) Thanks, Toby
Re: Another eps problem
>>To: lyx-users@lists.lyx.org >>From: "Miki Dovrat" <[EMAIL PROTECTED]> >>Subject: Re: Another eps problem >>Date: Fri, 26 Jan 2007 12:01:20 +0200 >>X-Newsreader: Microsoft Outlook Express 6.00.2900.2180 >>X-RFC2646: Format=Flowed; Original >> [..] >>It is a problem since the most wide-spread pdf viewer on windows is Acrobat, >>and if I give the document to someone I would like for them to be able to >>print it correctly. >> >>How can we be sure? I don't know, on Solaris I've spent months cursing AcrobatReader 7 which would not print Comic Sans MS fonts (which were perfect on screen). I guess the cause was the pdf2ps driver inside this release of Acrobat, because running externally the local pdf2ps script worked, as well as using Acrobat 5. An update of Acrobat Reader solved this, but I must say thet I stopped using it (or go back to Acroread5 for slides) because it take 2mn to load and happens to get stalled and eat all my cpu resources. I use xpdf, I know this does not help on Windows... -- Jean-Pierre
Re: Ÿ without ERT (\"Y)?
Tobias Krause wrote: > Thanks! > > Unfortunately if I copy it to my file it just produces \"{Y}... In LyX or in the generated TeX? If you looked at the generated TeX this is intended. In LyX it should look like a real Ÿ. If it does not, did you open both files in the same LyX instance? > Maybe ERT is the best way... Not if you want the Ÿ to become a real unicode Ÿ if you open the file with LyX 1.5. I attach a second file for copying. Note that I see the second capital Ÿ as ¾ on screen. I don't know if that is a LyX bug or a font problem, but the Postscript output is OK. Georg ydiarhesis.lyx Description: application/lyx
Re: Another eps problem
After some playing around trying to answer Paul's and Georg's questions, I came up with these conclusions: My ghostview prints everything correctly - the eps's by themselves, the lyx ps and pdf (dvipdfm and pdftex) outputs. Acrobat Reader (both versions 7.0.9 and 8) fail to print the figures correctly. Does Adobe not understand lyx pdf's the way ghostview does? I don't know who to blame, Adobe or the lyx conversions of eps to pdf, but I suspect the latter. It is a problem since the most wide-spread pdf viewer on windows is Acrobat, and if I give the document to someone I would like for them to be able to print it correctly. How can we be sure? Miki "Georg Baum" <[EMAIL PROTECTED]> wrote in message news:[EMAIL PROTECTED] > Am Donnerstag, 25. Januar 2007 17:43 schrieb Miki Dovrat: >> Hi, >> >> I have EPS generated from Microcal Origin, without a preview, which > always >> (up to now) have been behaving fine. >> >> Recently I have come across a strange problem, where my eps figures show > up >> correctly on either pdf (via all methods - dvipdfm, pdftex, ps2pdf), dvi, > or >> postscript, but they do not PRINT on a printer correctly. I have two >> printers (one HP laser printer, and one deskjet), the output is wrong on >> both. >> >> Details of the figure are missing - lines are missing, some marks are >> missing, but some are printed. I get about "half" of the figure printed. >> >> Ghostview complains about DSC warnings when I open the postscript file of >> the entire document, but displays everything on screen nicely. I don't > know >> what these DSC warnings are and if they are relevant. > > They are probably not relevant. What happens if you try to print these > files directly from ghostscript, without including them in LyX? Does it > work then? If yes I would suspect a problem in a converter that LyX uses, > if not then it has nothing to do with LyX. > > > Georg > >
Re: Ÿ without ERT (\"Y)?
> "Tobias" == Tobias Krause <[EMAIL PROTECTED]> writes: Tobias> Jma >> You can try to use latin9, where it is available. Tobias> Might there be problems with special german characters using Tobias> latin9? And if I trust wikipedia it should be in latin1 as Tobias> well (http://en.wikipedia.org/wiki/Latin1). But anyway, how Tobias> would I type it? Only the lowercase version is in latin1. Did you try to find it in windows characters applet? >> Just by curiosity: why do you need it ? I know only of two french >> names needing it, and I thought other languages did not have it. Tobias> I need it for the name Seÿffert. Thanks. JMarc
Comment on Lyx Windows Install: the "textclasses not found" problem
Hi Folks, Just installed Lyx yesterday on Windows, and, since I had a bit of trouble getting it to run, I thought I would post a quick report of what got it working. I installed using the "network bundle" at first, but constantly got a problem with Lyx refusing to start: the now quite famous "textclasses not found" problem. More precisely, the programs refuses to start and prints this as the error: LyXTextClassList::Read: no textclasses found! This was obviously something to do with the Tex installation: although I installed MikTex as part of the bundle, Lyx was somehow not finding it. As it started, it tried to download missing textclasses but then bombed out with an error. However, after reading an earlier comment on the Lyx list, I found that installing MikText separately seemed to do the trick. So, this means: -- Install MikTex (from the site, www.miktex.org). I used the "basic" version. -- Install Lyx Run Lyx: works fine. Hope this helps someone to get started with the tool in Windows. (Note: some other posters have suggested running the "configure.py" script located in the Lyx directory, under the subdirectory "Resources". This did NOT work for me: the configure script tried to load the (what it thought were) missing Tex classes and crashed whilst doing so with the above message.) Oh, I'm using Win XP with SP 2, and running Lyx 1.4.3-5. Cheers, Ed Bradburn -- Edward Bradburn | Technical Editor CoreMedia | Ludwig-Erhard-Str. 18, 20459 Hamburg, Germany Tel +49 40.325587.535 | Fax +49.40.325587.999 [EMAIL PROTECTED] | www.coremedia.com --- Any Content, Anywhere, in a Trusted Universe: CoreMedia CMS and CoreMedia DRM --- smime.p7s Description: S/MIME cryptographic signature
Re: Ÿ without ERT (\"Y)?
André Bonhôte wrote: > Hi > > I think I have read you're using Windows, so this won't help at all. > I just tried to type it here on my mac with lyx 1.4.3, and it works > fine with my dead key ¨, follwed by y. Seÿffert. It looks fine in the > output too. > > I don't know about German keyboards, but my Swiss German layout has > this dead key, right next to the ENTER key. > > Funny, that there are differences between mac and windows lyx ... The differences are in the OS, not LyX. If the OP can find a keyboard setting that will let him type ÿ (e.g. with a dead key) then it should just work. What does not work in 1.4.x (but will work in 1.5.0) is copying ÿ from other sources, e.g. this post. Georg
Re: Ÿ without ERT (\"Y)?
Thanks! Unfortunately if I copy it to my file it just produces \"{Y}... Maybe ERT is the best way... Thanks to everybody!
RE: Re: LyXTextClassList::Read: no textclasses found!
Hi Thomas, See my mail I sent to the list today -- have you tried installing MikTex *separately*, i.e. not with the bundle installer? That was the only thing that got Lyx working for me. Cheers, Ed Bradburn > -Original Message- > From: Thomas Sauter [mailto:[EMAIL PROTECTED] > Sent: Thursday, January 25, 2007 1:37 PM > To: lyx-users@lists.lyx.org > Subject: Re: Re: LyXTextClassList::Read: no textclasses found! > > I have exactly the same problem. > My home directory is not on a remote server and I tried the > manual reconfigure. But that didn't work. > It tells me that > tex\latex\IEEEtran\IEEEtran.cls is missing and that I should > install it. I do so. I get the same error. > > Any more ideas? > > Thank you in advance. > Thomas > > > > > -- > Dr. Thomas Sauter > > Systems Biology > Institute for System Dynamics > University of Stuttgart, Germany > http://www.isys.uni-stuttgart.de/~sauter/ > > smime.p7s Description: S/MIME cryptographic signature
Re: Ÿ without ERT (\"Y)?
Tobias Krause wrote: > It has to be in normal text (it's a name: Seÿffert) Then the file I just sent is wrong, but if you open it with a text editor you will see how to change it to produce ÿ instead of Ÿ. Georg
Re: Ÿ without ERT (\"Y)?
Hi I think I have read you're using Windows, so this won't help at all. I just tried to type it here on my mac with lyx 1.4.3, and it works fine with my dead key ¨, follwed by y. Seÿffert. It looks fine in the output too. I don't know about German keyboards, but my Swiss German layout has this dead key, right next to the ENTER key. Funny, that there are differences between mac and windows lyx ... CU! André On 26.01.2007, at 10:10, Tobias Krause wrote: maybe in the math mod with \bar Y It has to be in normal text (it's a name: Seÿffert) Toby André Bonhôte Systems Engineer COLT Telecom AG Mürtschenstrasse 27 CH-8048 Zürich Switzerland Tel: +41 (0)58 560 15 01 Internal OneDial: 8-411-0501 Fax: +41 (0)58 560 2501 Email: [EMAIL PROTECTED] www.colt.net Data | Voice | Managed Services PGP.sig Description: This is a digitally signed message part
Re: Ÿ without ERT (\"Y)?
Jma > You can try to use latin9, where it is available. Might there be problems with special german characters using latin9? And if I trust wikipedia it should be in latin1 as well (http://en.wikipedia.org/wiki/Latin1). But anyway, how would I type it? > Just by curiosity: why do you need it ? I know only of two french > names needing it, and I thought other languages did not have it. I need it for the name Seÿffert. Regards, Toby
Re: Ÿ without ERT (\"Y)?
Jean-Marc Lasgouttes wrote: >> "Tobias" == Tobias Krause <[EMAIL PROTECTED]> >> writes: > > Tobias> Hi, is there a way to insert Ÿ without using the ERT \"Y? > > Tobias> I'm using LyX 1.4.3-5, language: German, inputenc: latin1 > > You can try to use latin9, where it is available. If you need to use latin1 for some reason the native way would be to create a so called InsetLatexAccent. If you can make your keyboard produce a Ÿ then this will be done automatically. If that is not possible just copy it from the attached file. Georg ydiarhesis.lyx Description: application/lyx
Re: Ÿ without ERT (\"Y)?
> maybe in the math mod with \bar Y It has to be in normal text (it's a name: Seÿffert) Toby
Re: Ÿ without ERT (\"Y)?
> "Tobias" == Tobias Krause <[EMAIL PROTECTED]> writes: Tobias> Hi, is there a way to insert Ÿ without using the ERT \"Y? Tobias> I'm using LyX 1.4.3-5, language: German, inputenc: latin1 You can try to use latin9, where it is available. Just by curiosity: why do you need it ? I know only of two french names needing it, and I thought other languages did not have it. JMarc
Re: Ÿ without ERT (\"Y)?
Tobias Krause wrote: Hi, is there a way to insert Ÿ without using the ERT \"Y? You can use \ddot{Y} in math mode. Abdel.
Re: Ÿ without ERT (\"Y)?
Hi, maybe in the math mod with \bar Y Susanne Am Freitag, 26. Januar 2007 09:47 schrieb Tobias Krause: > Hi, > > is there a way to insert Ÿ without using the ERT \"Y? > > I'm using LyX 1.4.3-5, language: German, inputenc: latin1 > > Regards, Toby
Re: error producing output files from "g-letter"
Uwe Stöhr wrote: > The reason is that MiKTeX loads marvosym automatically and I currently > don't know why. Could you please report this on > http://bugzilla.lyx.org It's not MikTeX. This is a well known g-brief bug (it relies on marvosym). The g-brief maintainer is informed about this, but I'm not sure he cares. We also already have a bugzilla report somewhere. Jürgen
Ÿ without ERT (\"Y)?
Hi, is there a way to insert Ÿ without using the ERT \"Y? I'm using LyX 1.4.3-5, language: German, inputenc: latin1 Regards, Toby
Re: Section numbers in left margin?
Steve Litt wrote: > How do you know about all these packages? This is true for many on the > list -- someone comes up with a need and you know exactly what package to > use to accomplish it. Do you have all this memorized, or do you have a > quick way of looking it up? Either way, how do you do it -- I want to do > it too. Several reasons. I use many of the packages (like enumitem) myself. I've published quite a few books recently, and faced many of those questions there myself. And I frequently follow the discussion on comp.text.tex and (German) de.comp.text.tex (which both are good newsgroups, and googling their archives often helps). Finally, another excellent resource is Robin Fairbairn's TUG FAQ: http://www.tex.ac.uk/cgi-bin/texfaq2html?introduction=yes Jürgen