Re: table numbering and space after \textcelsius
On Thu, Jan 16, 2003 at 11:04:44AM -0600, Kirk R. Wythers wrote:
1) There are several instances where I have inserted the degree
centegrade symbol with the textcomp package. In each case there is a
single space after the tex code\textcelsius, however, upon printing
the space after the symbol appears lost (i.e. the degreeC symbol runs
right into the next word). And of course I can't type a second space in
between.
Use '\textcelsius{}' in ERT.
2) I have 5 regular tables placed in floats, and named with labeled so
that I can insert cross references in to the document. However, when I
print (or view dvi) my tables get numbered 1,3,5,6,7, not 1,2,3,4,5.
What up with that? I also have 3 figures, but they are numbered
correctly 1,2,3.,
Could you send a _minimal_ example .lyx file that shows this behaviour?
Andre'
--
Those who desire to give up Freedom in order to gain Security,
will not have, nor do they deserve, either one. (T. Jefferson)
Re: table numbering and space after \textcelsius
-BEGIN PGP SIGNED MESSAGE-
On Donnerstag, 16. Januar 2003 18:04, Kirk R. Wythers wrote:
1) There are several instances where I have inserted the degree
centegrade symbol with the textcomp package. In each case there is a
single space after the tex code\textcelsius, however, upon printing
the space after the symbol appears lost (i.e. the degreeC symbol runs
right into the next word). And of course I can't type a second space in
between.
I am using \usepackage{isolatin1} in the preamble with no problems.
(degrees defined to be 0xb0)
Kornel
- --
Kornel Benko
[EMAIL PROTECTED]
-BEGIN PGP SIGNATURE-
Version: PGP 6.5.8
iQCVAwUBPibr3rewfbDGmeqhAQEojQP+OnzHNqdjd3iq7PMztGHqQM752puU0guj
DTRFsZl8KIESnFgRFXs2djI7d3Pdm83uHVDuM6b2STbEHMUHtEMWGFmx35s76L2u
GQKLX+wPbBGdDkB/Qz3rHKHvzIrOCbRRyoQJpesXofP+Qu2u6gYUEQim0rkygKTy
E+M2/1mgSn8=
=pqsT
-END PGP SIGNATURE-
Re: table numbering and space after \textcelsius
Kirk R. Wythers schrieb:
1) There are several instances where I have inserted the degree
centegrade symbol with the textcomp package. In each case there is a
single space after the tex code\textcelsius, however, upon printing
the space after the symbol appears lost (i.e. the degreeC symbol runs
right into the next word). And of course I can't type a second space in
between.
\textcelsius{} or behind \textcelsius a ctrl-space
2) I have 5 regular tables placed in floats, and named with labeled so
that I can insert cross references in to the document. However, when I
print (or view dvi) my tables get numbered 1,3,5,6,7, not 1,2,3,4,5.
What up with that? I also have 3 figures, but they are numbered
correctly 1,2,3.,
I suppose that you have a longtable as the second one.
Look at my pages for longtable.
Herbert
--
http://www.educat.hu-berlin.de/~voss/lyx/
Re: table numbering and space after \textcelsius
On Thu, Jan 16, 2003 at 11:17:32AM -0600, Kirk R. Wythers wrote: Could you send a _minimal_ example .lyx file that shows this behaviour? Here is a example... thanks *ARGH* I did not ask for an example, but for a minimal one. 100k does not count as minimal. --- There seems to be a problem with the longtable stuff. Are you sure you have to put it into a table float? Do you need them at all? Your tables aren't that long... Andre' -- Those who desire to give up Freedom in order to gain Security, will not have, nor do they deserve, either one. (T. Jefferson)
Re: table numbering and space after \textcelsius
On Thu, 2003-01-16 at 11:30, Herbert Voss wrote:
Kirk R. Wythers schrieb:
1) There are several instances where I have inserted the degree
centegrade symbol with the textcomp package. In each case there is a
single space after the tex code\textcelsius, however, upon printing
the space after the symbol appears lost (i.e. the degreeC symbol runs
right into the next word). And of course I can't type a second space in
between.
\textcelsius{} or behind \textcelsius a ctrl-space
that works... thanks
2) I have 5 regular tables placed in floats, and named with labeled so
that I can insert cross references in to the document. However, when I
print (or view dvi) my tables get numbered 1,3,5,6,7, not 1,2,3,4,5.
What up with that? I also have 3 figures, but they are numbered
correctly 1,2,3.,
I suppose that you have a longtable as the second one.
they are regular tables... they used to be long tables, but I switched
them to regular tables by inserting a new regular table, then copying
and pasting...
Look at my pages for longtable.
Herbert
--
Kirk R. Wythers email: [EMAIL PROTECTED]
University of Minnesota tel: 612.625.2261
Department of Forest Resources fax: 612.625.5212
Saint Paul, MN 55108
Re: table numbering and space after \textcelsius
On Thu, Jan 16, 2003 at 11:35:57AM -0600, Kirk R. Wythers wrote: I suppose that you have a longtable as the second one. they are regular tables... they used to be long tables, but I switched them to regular tables by inserting a new regular table, then copying and pasting... lyxtabular version=3 rows=15 columns=5 features islongtable=true Well. Andre' -- Those who desire to give up Freedom in order to gain Security, will not have, nor do they deserve, either one. (T. Jefferson)
Re: table numbering and space after \textcelsius
Kirk R. Wythers schrieb: I suppose that you have a longtable as the second one. they are regular tables... they used to be long tables, but I switched them to regular tables by inserting a new regular table, then copying and pasting... look for the second one. Click with right mouse button and cursor inside the table and look what the menu says Herbert -- http://www.educat.hu-berlin.de/~voss/lyx/
Re: table numbering and space after \textcelsius
On Thu, Jan 16, 2003 at 11:04:44AM -0600, Kirk R. Wythers wrote:
1) There are several instances where I have inserted the degree
centegrade symbol with the textcomp package. In each case there is a
single space after the tex code\textcelsius, however, upon printing
the space after the symbol appears lost (i.e. the degreeC symbol runs
right into the next word). And of course I can't type a second space in
between.
Use '\textcelsius{}' in ERT.
2) I have 5 regular tables placed in floats, and named with labeled so
that I can insert cross references in to the document. However, when I
print (or view dvi) my tables get numbered 1,3,5,6,7, not 1,2,3,4,5.
What up with that? I also have 3 figures, but they are numbered
correctly 1,2,3.,
Could you send a _minimal_ example .lyx file that shows this behaviour?
Andre'
--
Those who desire to give up Freedom in order to gain Security,
will not have, nor do they deserve, either one. (T. Jefferson)
Re: table numbering and space after \textcelsius
-BEGIN PGP SIGNED MESSAGE-
On Donnerstag, 16. Januar 2003 18:04, Kirk R. Wythers wrote:
1) There are several instances where I have inserted the degree
centegrade symbol with the textcomp package. In each case there is a
single space after the tex code\textcelsius, however, upon printing
the space after the symbol appears lost (i.e. the degreeC symbol runs
right into the next word). And of course I can't type a second space in
between.
I am using \usepackage{isolatin1} in the preamble with no problems.
(degrees defined to be 0xb0)
Kornel
- --
Kornel Benko
[EMAIL PROTECTED]
-BEGIN PGP SIGNATURE-
Version: PGP 6.5.8
iQCVAwUBPibr3rewfbDGmeqhAQEojQP+OnzHNqdjd3iq7PMztGHqQM752puU0guj
DTRFsZl8KIESnFgRFXs2djI7d3Pdm83uHVDuM6b2STbEHMUHtEMWGFmx35s76L2u
GQKLX+wPbBGdDkB/Qz3rHKHvzIrOCbRRyoQJpesXofP+Qu2u6gYUEQim0rkygKTy
E+M2/1mgSn8=
=pqsT
-END PGP SIGNATURE-
Re: table numbering and space after \textcelsius
Kirk R. Wythers schrieb:
1) There are several instances where I have inserted the degree
centegrade symbol with the textcomp package. In each case there is a
single space after the tex code\textcelsius, however, upon printing
the space after the symbol appears lost (i.e. the degreeC symbol runs
right into the next word). And of course I can't type a second space in
between.
\textcelsius{} or behind \textcelsius a ctrl-space
2) I have 5 regular tables placed in floats, and named with labeled so
that I can insert cross references in to the document. However, when I
print (or view dvi) my tables get numbered 1,3,5,6,7, not 1,2,3,4,5.
What up with that? I also have 3 figures, but they are numbered
correctly 1,2,3.,
I suppose that you have a longtable as the second one.
Look at my pages for longtable.
Herbert
--
http://www.educat.hu-berlin.de/~voss/lyx/
Re: table numbering and space after \textcelsius
On Thu, Jan 16, 2003 at 11:17:32AM -0600, Kirk R. Wythers wrote: Could you send a _minimal_ example .lyx file that shows this behaviour? Here is a example... thanks *ARGH* I did not ask for an example, but for a minimal one. 100k does not count as minimal. --- There seems to be a problem with the longtable stuff. Are you sure you have to put it into a table float? Do you need them at all? Your tables aren't that long... Andre' -- Those who desire to give up Freedom in order to gain Security, will not have, nor do they deserve, either one. (T. Jefferson)
Re: table numbering and space after \textcelsius
On Thu, 2003-01-16 at 11:30, Herbert Voss wrote:
Kirk R. Wythers schrieb:
1) There are several instances where I have inserted the degree
centegrade symbol with the textcomp package. In each case there is a
single space after the tex code\textcelsius, however, upon printing
the space after the symbol appears lost (i.e. the degreeC symbol runs
right into the next word). And of course I can't type a second space in
between.
\textcelsius{} or behind \textcelsius a ctrl-space
that works... thanks
2) I have 5 regular tables placed in floats, and named with labeled so
that I can insert cross references in to the document. However, when I
print (or view dvi) my tables get numbered 1,3,5,6,7, not 1,2,3,4,5.
What up with that? I also have 3 figures, but they are numbered
correctly 1,2,3.,
I suppose that you have a longtable as the second one.
they are regular tables... they used to be long tables, but I switched
them to regular tables by inserting a new regular table, then copying
and pasting...
Look at my pages for longtable.
Herbert
--
Kirk R. Wythers email: [EMAIL PROTECTED]
University of Minnesota tel: 612.625.2261
Department of Forest Resources fax: 612.625.5212
Saint Paul, MN 55108
Re: table numbering and space after \textcelsius
On Thu, Jan 16, 2003 at 11:35:57AM -0600, Kirk R. Wythers wrote: I suppose that you have a longtable as the second one. they are regular tables... they used to be long tables, but I switched them to regular tables by inserting a new regular table, then copying and pasting... lyxtabular version=3 rows=15 columns=5 features islongtable=true Well. Andre' -- Those who desire to give up Freedom in order to gain Security, will not have, nor do they deserve, either one. (T. Jefferson)
Re: table numbering and space after \textcelsius
Kirk R. Wythers schrieb: I suppose that you have a longtable as the second one. they are regular tables... they used to be long tables, but I switched them to regular tables by inserting a new regular table, then copying and pasting... look for the second one. Click with right mouse button and cursor inside the table and look what the menu says Herbert -- http://www.educat.hu-berlin.de/~voss/lyx/
Re: table numbering and space after \textcelsius
On Thu, Jan 16, 2003 at 11:04:44AM -0600, Kirk R. Wythers wrote:
> 1) There are several instances where I have inserted the degree
> centegrade symbol with the textcomp package. In each case there is a
> single space after the "tex code"\textcelsius, however, upon printing
> the space after the symbol appears lost (i.e. the degreeC symbol runs
> right into the next word). And of course I can't type a second space in
> between.
Use '\textcelsius{}' in ERT.
> 2) I have 5 regular tables placed in floats, and named with labeled so
> that I can insert cross references in to the document. However, when I
> print (or view dvi) my tables get numbered 1,3,5,6,7, not 1,2,3,4,5.
> What up with that? I also have 3 figures, but they are numbered
> correctly 1,2,3.,
Could you send a _minimal_ example .lyx file that shows this behaviour?
Andre'
--
Those who desire to give up Freedom in order to gain Security,
will not have, nor do they deserve, either one. (T. Jefferson)
Re: table numbering and space after \textcelsius
-BEGIN PGP SIGNED MESSAGE-
On Donnerstag, 16. Januar 2003 18:04, Kirk R. Wythers wrote:
> 1) There are several instances where I have inserted the degree
> centegrade symbol with the textcomp package. In each case there is a
> single space after the "tex code"\textcelsius, however, upon printing
> the space after the symbol appears lost (i.e. the degreeC symbol runs
> right into the next word). And of course I can't type a second space in
> between.
I am using "\usepackage{isolatin1}" in the preamble with no problems.
(degrees defined to be 0xb0)
Kornel
- --
Kornel Benko
[EMAIL PROTECTED]
-BEGIN PGP SIGNATURE-
Version: PGP 6.5.8
iQCVAwUBPibr3rewfbDGmeqhAQEojQP+OnzHNqdjd3iq7PMztGHqQM752puU0guj
DTRFsZl8KIESnFgRFXs2djI7d3Pdm83uHVDuM6b2STbEHMUHtEMWGFmx35s76L2u
GQKLX+wPbBGdDkB/Qz3rHKHvzIrOCbRRyoQJpesXofP+Qu2u6gYUEQim0rkygKTy
E+M2/1mgSn8=
=pqsT
-END PGP SIGNATURE-
Re: table numbering and space after \textcelsius
Kirk R. Wythers schrieb:
1) There are several instances where I have inserted the degree
centegrade symbol with the textcomp package. In each case there is a
single space after the "tex code"\textcelsius, however, upon printing
the space after the symbol appears lost (i.e. the degreeC symbol runs
right into the next word). And of course I can't type a second space in
between.
\textcelsius{} or behind \textcelsius a ctrl-space
2) I have 5 regular tables placed in floats, and named with labeled so
that I can insert cross references in to the document. However, when I
print (or view dvi) my tables get numbered 1,3,5,6,7, not 1,2,3,4,5.
What up with that? I also have 3 figures, but they are numbered
correctly 1,2,3.,
I suppose that you have a longtable as the second one.
Look at my pages for longtable.
Herbert
--
http://www.educat.hu-berlin.de/~voss/lyx/
Re: table numbering and space after \textcelsius
On Thu, Jan 16, 2003 at 11:17:32AM -0600, Kirk R. Wythers wrote: > > > Could you send a _minimal_ example .lyx file that shows this behaviour? > > Here is a example... thanks *ARGH* I did not ask for an example, but for a minimal one. 100k does not count as minimal. --- There seems to be a problem with the longtable stuff. Are you sure you have to put it into a table float? Do you need them at all? Your tables aren't that long... Andre' -- Those who desire to give up Freedom in order to gain Security, will not have, nor do they deserve, either one. (T. Jefferson)
Re: table numbering and space after \textcelsius
On Thu, 2003-01-16 at 11:30, Herbert Voss wrote:
> Kirk R. Wythers schrieb:
> > 1) There are several instances where I have inserted the degree
> > centegrade symbol with the textcomp package. In each case there is a
> > single space after the "tex code"\textcelsius, however, upon printing
> > the space after the symbol appears lost (i.e. the degreeC symbol runs
> > right into the next word). And of course I can't type a second space in
> > between.
>
> \textcelsius{} or behind \textcelsius a ctrl-space
that works... thanks
>
> > 2) I have 5 regular tables placed in floats, and named with labeled so
> > that I can insert cross references in to the document. However, when I
> > print (or view dvi) my tables get numbered 1,3,5,6,7, not 1,2,3,4,5.
> > What up with that? I also have 3 figures, but they are numbered
> > correctly 1,2,3.,
>
> I suppose that you have a longtable as the second one.
they are regular tables... they used to be long tables, but I switched
them to regular tables by inserting a new regular table, then copying
and pasting...
> Look at my pages for longtable.
>
> Herbert
--
Kirk R. Wythers email: [EMAIL PROTECTED]
University of Minnesota tel: 612.625.2261
Department of Forest Resources fax: 612.625.5212
Saint Paul, MN 55108
Re: table numbering and space after \textcelsius
On Thu, Jan 16, 2003 at 11:35:57AM -0600, Kirk R. Wythers wrote: > > I suppose that you have a longtable as the second one. > > they are regular tables... they used to be long tables, but I switched > them to regular tables by inserting a new regular table, then copying > and pasting... Well. Andre' -- Those who desire to give up Freedom in order to gain Security, will not have, nor do they deserve, either one. (T. Jefferson)
Re: table numbering and space after \textcelsius
Kirk R. Wythers schrieb: I suppose that you have a longtable as the second one. they are regular tables... they used to be long tables, but I switched them to regular tables by inserting a new regular table, then copying and pasting... look for the second one. Click with right mouse button and cursor inside the table and look what the menu says Herbert -- http://www.educat.hu-berlin.de/~voss/lyx/
