Re: How to change numeration size and upper case

[Olivier Ripoll]

On 30.10.2011 23:00, Kenedy Torcatt wrote:

Hello, I have LyX 2.0, using urw-arial, calling the packege with this
code in the preamble:

\usepackage[T1]{fontenc}
\usepackage[scaled]{uarial}
\renewcommand*\familydefault{\sfdefault}

I realized that roman numbers are so tiny and lower case. I need them
upper case a bit bigger.
Arabic numbers are fine.

How could I achieve that?

P.S:_ for roman numbers I used this in the preamble:

\renewcommand{\thepage}{\roman{page}}
\setcounter{page}{1}


I think roman means lowercase while Roman means uppercase. And 
arabic for arabic numbers (*)


Best regards,

Olivier



Thankyou!

Kenedy



(*) Indian numbers in fact ;-)

Re: How to change numeration size and upper case

[Olivier Ripoll]

On 30.10.2011 23:00, Kenedy Torcatt wrote:

Hello, I have LyX 2.0, using urw-arial, calling the packege with this
code in the preamble:

\usepackage[T1]{fontenc}
\usepackage[scaled]{uarial}
\renewcommand*\familydefault{\sfdefault}

I realized that roman numbers are so tiny and lower case. I need them
upper case a bit bigger.
Arabic numbers are fine.

How could I achieve that?

P.S:_ for roman numbers I used this in the preamble:

\renewcommand{\thepage}{\roman{page}}
\setcounter{page}{1}


I think roman means lowercase while Roman means uppercase. And 
arabic for arabic numbers (*)


Best regards,

Olivier



Thankyou!

Kenedy



(*) Indian numbers in fact ;-)

Re: How to change numeration size and upper case

[Olivier Ripoll]

On 30.10.2011 23:00, Kenedy Torcatt wrote:

Hello, I have LyX 2.0, using urw-arial, calling the packege with this
code in the preamble:

\usepackage[T1]{fontenc}
\usepackage[scaled]{uarial}
\renewcommand*\familydefault{\sfdefault}

I realized that roman numbers are so tiny and lower case. I need them
upper case a bit bigger.
Arabic numbers are fine.

How could I achieve that?

P.S:_ for roman numbers I used this in the preamble:

\renewcommand{\thepage}{\roman{page}}
\setcounter{page}{1}


I think "roman" means lowercase while "Roman" means uppercase. And 
"arabic" for arabic numbers (*)


Best regards,

Olivier



Thankyou!

Kenedy



(*) Indian numbers in fact ;-)

How to change numeration size and upper case

[Kenedy Torcatt]

Hello, I have LyX 2.0, using urw-arial, calling the packege with this
code in the preamble:

\usepackage[T1]{fontenc}
\usepackage[scaled]{uarial}
\renewcommand*\familydefault{\sfdefault}

I realized that roman numbers are so tiny and lower case. I need them
upper case a bit bigger.
Arabic numbers are fine.

How could I achieve that?

P.S:_ for roman numbers I used this in the preamble:

\renewcommand{\thepage}{\roman{page}}
\setcounter{page}{1}

Thankyou!

Kenedy

How to change numeration size and upper case

[Kenedy Torcatt]

Hello, I have LyX 2.0, using urw-arial, calling the packege with this
code in the preamble:

\usepackage[T1]{fontenc}
\usepackage[scaled]{uarial}
\renewcommand*\familydefault{\sfdefault}

I realized that roman numbers are so tiny and lower case. I need them
upper case a bit bigger.
Arabic numbers are fine.

How could I achieve that?

P.S:_ for roman numbers I used this in the preamble:

\renewcommand{\thepage}{\roman{page}}
\setcounter{page}{1}

Thankyou!

Kenedy

How to change numeration size and upper case

[Kenedy Torcatt]

Hello, I have LyX 2.0, using urw-arial, calling the packege with this
code in the preamble:

\usepackage[T1]{fontenc}
\usepackage[scaled]{uarial}
\renewcommand*\familydefault{\sfdefault}

I realized that roman numbers are so tiny and lower case. I need them
upper case a bit bigger.
Arabic numbers are fine.

How could I achieve that?

P.S:_ for roman numbers I used this in the preamble:

\renewcommand{\thepage}{\roman{page}}
\setcounter{page}{1}

Thankyou!

Kenedy

need help with numeration in lyx

[davy]

hello,

I am a German mother tongue speaker and hope you can understand my English.

I have a document the following way...

Chapter 1 blablabla

1 blablabla
2 blublublu

Chapter 2 ljljljljljl

3 blobloblo
4 bliblibli
5 blebleble

I need it though like this...

Chapter 1 blablabla

1 blablabla
2 blublublu

Chapter 2 ljljljljljl

1 blobloblo
2 bliblibli
3 blebleble

can I do this in Lyx?

Thanks a lot

Davy

Re: need help with numeration in lyx

[stefano franchi]

Dave,

I do not quite understand your issue. What are the 1. blablabla 2.
blublublu etc? Sections? Items in a list? Perhaps you could send along a
minimal example. It'd be easier to help you.

Stefano

On Thu, Dec 2, 2010 at 4:13 PM, davy davy.b...@gmail.com wrote:

 hello,

 I am a German mother tongue speaker and hope you can understand my English.

 I have a document the following way...

 Chapter 1 blablabla

 1 blablabla
 2 blublublu

 Chapter 2 ljljljljljl

 3 blobloblo
 4 bliblibli
 5 blebleble

 I need it though like this...

 Chapter 1 blablabla

 1 blablabla
 2 blublublu

 Chapter 2 ljljljljljl

 1 blobloblo
 2 bliblibli
 3 blebleble

 can I do this in Lyx?

 Thanks a lot

 Davy

need help with numeration in lyx

[davy]

hello,

I am a German mother tongue speaker and hope you can understand my English.

I have a document the following way...

Chapter 1 blablabla

1 blablabla
2 blublublu

Chapter 2 ljljljljljl

3 blobloblo
4 bliblibli
5 blebleble

I need it though like this...

Chapter 1 blablabla

1 blablabla
2 blublublu

Chapter 2 ljljljljljl

1 blobloblo
2 bliblibli
3 blebleble

can I do this in Lyx?

Thanks a lot

Davy

Re: need help with numeration in lyx

[stefano franchi]

Dave,

I do not quite understand your issue. What are the 1. blablabla 2.
blublublu etc? Sections? Items in a list? Perhaps you could send along a
minimal example. It'd be easier to help you.

Stefano

On Thu, Dec 2, 2010 at 4:13 PM, davy davy.b...@gmail.com wrote:

 hello,

 I am a German mother tongue speaker and hope you can understand my English.

 I have a document the following way...

 Chapter 1 blablabla

 1 blablabla
 2 blublublu

 Chapter 2 ljljljljljl

 3 blobloblo
 4 bliblibli
 5 blebleble

 I need it though like this...

 Chapter 1 blablabla

 1 blablabla
 2 blublublu

 Chapter 2 ljljljljljl

 1 blobloblo
 2 bliblibli
 3 blebleble

 can I do this in Lyx?

 Thanks a lot

 Davy

need help with numeration in lyx

[davy]

hello,

I am a German mother tongue speaker and hope you can understand my English.

I have a document the following way...

Chapter 1 blablabla

1 blablabla
2 blublublu

Chapter 2 ljljljljljl

3 blobloblo
4 bliblibli
5 blebleble

I need it though like this...

Chapter 1 blablabla

1 blablabla
2 blublublu

Chapter 2 ljljljljljl

1 blobloblo
2 bliblibli
3 blebleble

can I do this in Lyx?

Thanks a lot

Davy

Re: need help with numeration in lyx

[stefano franchi]

Dave,

I do not quite understand your issue. What are the "1. blablabla" "2.
blublublu" etc? Sections? Items in a list? Perhaps you could send along a
minimal example. It'd be easier to help you.

Stefano

On Thu, Dec 2, 2010 at 4:13 PM, davy  wrote:

> hello,
>
> I am a German mother tongue speaker and hope you can understand my English.
>
> I have a document the following way...
>
> Chapter 1 blablabla
>
> 1 blablabla
> 2 blublublu
>
> Chapter 2 ljljljljljl
>
> 3 blobloblo
> 4 bliblibli
> 5 blebleble
>
> I need it though like this...
>
> Chapter 1 blablabla
>
> 1 blablabla
> 2 blublublu
>
> Chapter 2 ljljljljljl
>
> 1 blobloblo
> 2 bliblibli
> 3 blebleble
>
> can I do this in Lyx?
>
> Thanks a lot
>
> Davy
>
>

Re: Manage numeration pages

[Ignacio García]

Adrian Diaz wrote, (Tue, 14 Jul 2009)

 I am writting my thesis with lyx 1.6.3 with document class book(more font
 size) Layout page fancy.
 i need a roman numeration for: Tables Conts, list of figures and list of
 tables as : i ii iii iv etc(ascending order)
 and the others pages with arabic numeration (ascending order too) as 1 2 3 4
 etc.

The following way works here. [It's taken from the LaTeX preamble used in
some LyX help manuals (book and book KOMA-script classes)].

In the LateX preamble add the lines:

\let\myTOC\tableofcontents
\renewcommand\tableofcontents{%
  \frontmatter
  \pdfbookmark[1]{\contentsname}{}
  \myTOC
  \mainmatter }
\let\myLOF\listoffigures
\renewcommand\listoffigures{%
  \frontmatter
  \myLOF
  \mainmatter }
\let\myLOT\listoftables
\renewcommand\listoftables{%
  \frontmatter
  \myLOT
  \mainmatter }


Note: If the document language is Spanish, roman (i, ii, ...) is
changed automatically by Small Caps (I, II ...) as it's the standard.

Regards
Ignacio García

Re: Manage numeration pages

[rgheck]

On 07/15/2009 12:25 AM, Adrian Diaz wrote:

Hi friends

I am writting my thesis with lyx 1.6.3 with document class book(more font
size) Layout page fancy.
i need a roman numeration for: Tables Conts, list of figures and list of
tables as : i ii iii iv etc(ascending order)
and the others pages with arabic numeration (ascending order too) as 1 2 3 4
etc.

Could you tell me how i can do it.

   
Before that stuff, put \frontmatter in ERT. After it, where you want 
arabic, put \mainmatter.


rh

Re: Manage numeration pages

[Ignacio García]

Adrian Diaz wrote, (Tue, 14 Jul 2009)

 I am writting my thesis with lyx 1.6.3 with document class book(more font
 size) Layout page fancy.
 i need a roman numeration for: Tables Conts, list of figures and list of
 tables as : i ii iii iv etc(ascending order)
 and the others pages with arabic numeration (ascending order too) as 1 2 3 4
 etc.

The following way works here. [It's taken from the LaTeX preamble used in
some LyX help manuals (book and book KOMA-script classes)].

In the LateX preamble add the lines:

\let\myTOC\tableofcontents
\renewcommand\tableofcontents{%
  \frontmatter
  \pdfbookmark[1]{\contentsname}{}
  \myTOC
  \mainmatter }
\let\myLOF\listoffigures
\renewcommand\listoffigures{%
  \frontmatter
  \myLOF
  \mainmatter }
\let\myLOT\listoftables
\renewcommand\listoftables{%
  \frontmatter
  \myLOT
  \mainmatter }


Note: If the document language is Spanish, roman (i, ii, ...) is
changed automatically by Small Caps (I, II ...) as it's the standard.

Regards
Ignacio García

Re: Manage numeration pages

[rgheck]

On 07/15/2009 12:25 AM, Adrian Diaz wrote:

Hi friends

I am writting my thesis with lyx 1.6.3 with document class book(more font
size) Layout page fancy.
i need a roman numeration for: Tables Conts, list of figures and list of
tables as : i ii iii iv etc(ascending order)
and the others pages with arabic numeration (ascending order too) as 1 2 3 4
etc.

Could you tell me how i can do it.

   
Before that stuff, put \frontmatter in ERT. After it, where you want 
arabic, put \mainmatter.


rh

Re: Manage numeration pages

[Ignacio García]

Adrian Diaz wrote, (Tue, 14 Jul 2009)

> I am writting my thesis with lyx 1.6.3 with document class book(more font
> size) Layout page fancy.
> i need a roman numeration for: Tables Conts, list of figures and list of
> tables as : i ii iii iv etc(ascending order)
> and the others pages with arabic numeration (ascending order too) as 1 2 3 4
> etc.

The following way works here. [It's taken from the LaTeX preamble used in
some LyX help manuals (book and book KOMA-script classes)].

In the LateX preamble add the lines:

\let\myTOC\tableofcontents
\renewcommand\tableofcontents{%
  \frontmatter
  \pdfbookmark[1]{\contentsname}{}
  \myTOC
  \mainmatter }
\let\myLOF\listoffigures
\renewcommand\listoffigures{%
  \frontmatter
  \myLOF
  \mainmatter }
\let\myLOT\listoftables
\renewcommand\listoftables{%
  \frontmatter
  \myLOT
  \mainmatter }


Note: If the document language is Spanish, roman (i, ii, ...) is
changed automatically by Small Caps (I, II ...) as it's the standard.

Regards
Ignacio García

Re: Manage numeration pages

[rgheck]

On 07/15/2009 12:25 AM, Adrian Diaz wrote:

Hi friends

I am writting my thesis with lyx 1.6.3 with document class book(more font
size) Layout page fancy.
i need a roman numeration for: Tables Conts, list of figures and list of
tables as : i ii iii iv etc(ascending order)
and the others pages with arabic numeration (ascending order too) as 1 2 3 4
etc.

Could you tell me how i can do it.

   
Before that stuff, put "\frontmatter" in ERT. After it, where you want 
arabic, put "\mainmatter".


rh

Manage numeration pages

[Adrian Diaz]

Hi friends

I am writting my thesis with lyx 1.6.3 with document class book(more font
size) Layout page fancy.
i need a roman numeration for: Tables Conts, list of figures and list of
tables as : i ii iii iv etc(ascending order)
and the others pages with arabic numeration (ascending order too) as 1 2 3 4
etc.

Could you tell me how i can do it.

  Thhanks in advance.  Adrián

Manage numeration pages

[Adrian Diaz]

Hi friends

I am writting my thesis with lyx 1.6.3 with document class book(more font
size) Layout page fancy.
i need a roman numeration for: Tables Conts, list of figures and list of
tables as : i ii iii iv etc(ascending order)
and the others pages with arabic numeration (ascending order too) as 1 2 3 4
etc.

Could you tell me how i can do it.

  Thhanks in advance.  Adrián

Manage numeration pages

[Adrian Diaz]

Hi friends

I am writting my thesis with lyx 1.6.3 with document class book(more font
size) Layout page fancy.
i need a roman numeration for: Tables Conts, list of figures and list of
tables as : i ii iii iv etc(ascending order)
and the others pages with arabic numeration (ascending order too) as 1 2 3 4
etc.

Could you tell me how i can do it.

  Thhanks in advance.  Adrián

Re: Consecutive numeration of lists also after a section in standard-format

[Steve Litt]

On Wednesday 18 March 2009 01:04:27 pm jezZiFeR wrote:
 Dear listmembers,

 I do have a list with six sentences. They start with

 1.)
 2.)
 3.)
 4.)

 Then I entered a description for this forth sentence, and after that I
 would like to continue with:

 5.)
 6.)

 But the problem is, that when I choose numeration in the menu, the
 numeration again starts with 1. How could I change that behaviour?

 Thanks, best
 Jess

I don't remember what you call it, but LyX has buttons to nest paragraphs. 
Nest the descriptive paragraph inside sentence #4, and I believe it should do 
exactly what you want. Not only that, it's very representative of what you're 
doing, because the descriptive paragraph is ABOUT sentence 4. Styles based 
authoring at its best.

SteveT

Steve Litt
Recession Relief Package
http://www.recession-relief.US
Twitter: http://www.twitter.com/stevelitt

Re: Consecutive numeration of lists also after a section in standard-format

[jezZiFeR]

dear steve,

thank you! i´ve asked this question some months ago, and it was  
already solved, but my harddisk had a problem, and after a backup some  
100 mails were sent again automatically. sorry for that, i hope it is  
the only one here in this list…


so, i´ll also try out your solution, it seems very handy.

best*
jess



Am 27.05.2009 um 16:13 schrieb Steve Litt:


On Wednesday 18 March 2009 01:04:27 pm jezZiFeR wrote:

Dear listmembers,

I do have a list with six sentences. They start with

1.)
2.)
3.)
4.)

Then I entered a description for this forth sentence, and after  
that I

would like to continue with:

5.)
6.)

But the problem is, that when I choose numeration in the menu, the
numeration again starts with 1. How could I change that behaviour?

Thanks, best
Jess


I don't remember what you call it, but LyX has buttons to nest  
paragraphs.
Nest the descriptive paragraph inside sentence #4, and I believe it  
should do
exactly what you want. Not only that, it's very representative of  
what you're
doing, because the descriptive paragraph is ABOUT sentence 4. Styles  
based

authoring at its best.

SteveT

Steve Litt
Recession Relief Package
http://www.recession-relief.US
Twitter: http://www.twitter.com/stevelitt

Re: Consecutive numeration of lists also after a section in standard-format

[Guenter Milde]

On 2009-05-27, Steve Litt wrote:
 On Wednesday 18 March 2009 01:04:27 pm jezZiFeR wrote:

 I do have a list with six sentences. They start with

 1.)
 2.)
 3.)
 4.)

 Then I entered a description for this forth sentence, and after that I
 would like to continue with:

 5.)
 6.)

 But the problem is, that when I choose numeration in the menu, the
 numeration again starts with 1. How could I change that behaviour?

 I don't remember what you call it, but LyX has buttons to nest
 paragraphs.  Nest the descriptive paragraph inside sentence #4, and I
 believe it should do exactly what you want. Not only that, it's very
 representative of what you're doing, because the descriptive paragraph
 is ABOUT sentence 4. Styles based authoring at its best.

For the record: if you really want to continue an enumeration after a
top-level interuption, you can use the enumitem module. (Search for
enumitem at http://wiki.lyx.org)

Günter

Re: Consecutive numeration of lists also after a section in standard-format

[Bruce Pourciau]

On May 27, 2009, at 3:49 PM, Guenter Milde wrote:


On 2009-05-27, Steve Litt wrote:

On Wednesday 18 March 2009 01:04:27 pm jezZiFeR wrote:



I do have a list with six sentences. They start with



1.)
2.)
3.)
4.)


Then I entered a description for this forth sentence, and after  
that I

would like to continue with:



5.)
6.)



But the problem is, that when I choose numeration in the menu, the
numeration again starts with 1. How could I change that behaviour?



I don't remember what you call it, but LyX has buttons to nest
paragraphs.  Nest the descriptive paragraph inside sentence #4, and I
believe it should do exactly what you want. Not only that, it's very
representative of what you're doing, because the descriptive  
paragraph

is ABOUT sentence 4. Styles based authoring at its best.


For the record: if you really want to continue an enumeration after a
top-level interuption, you can use the enumitem module. (Search  
for

enumitem at http://wiki.lyx.org)

Günter



This particular request -- to have an enumeration resume after an  
interruption, and often an interruption at the top-level -- appears  
on the list quite frequently. Among the developers, has any thought  
been given to making this a menu option (called Resume Enumeration,  
say) in a future version of LyX?


Bruce

Re: Consecutive numeration of lists also after a section in standard-format

[Vincent van Ravesteijn]

Bruce Pourciau schreef:


On May 27, 2009, at 3:49 PM, Guenter Milde wrote:


On 2009-05-27, Steve Litt wrote:

On Wednesday 18 March 2009 01:04:27 pm jezZiFeR wrote:



I do have a list with six sentences. They start with



1.)
2.)
3.)
4.)



Then I entered a description for this forth sentence, and after that I
would like to continue with:



5.)
6.)



But the problem is, that when I choose numeration in the menu, the
numeration again starts with 1. How could I change that behaviour?



I don't remember what you call it, but LyX has buttons to nest
paragraphs.  Nest the descriptive paragraph inside sentence #4, and I
believe it should do exactly what you want. Not only that, it's very
representative of what you're doing, because the descriptive paragraph
is ABOUT sentence 4. Styles based authoring at its best.


For the record: if you really want to continue an enumeration after a
top-level interuption, you can use the enumitem module. (Search for
enumitem at http://wiki.lyx.org)

Günter



This particular request -- to have an enumeration resume after an 
interruption, and often an interruption at the top-level -- appears 
on the list quite frequently. Among the developers, has any thought 
been given to making this a menu option (called Resume Enumeration, 
say) in a future version of LyX?


Bruce
Yes, I implemented that once, and then someone (guess who ;-)) came up 
with a module that could do it. However, both solutions have their yet 
unsolved problems, so until now, neither of the two has made it in.


Maybe, Gunter and I should have another chat about this.

Vincent

Re: Consecutive numeration of lists also after a section in standard-format

[Steve Litt]

On Wednesday 18 March 2009 01:04:27 pm jezZiFeR wrote:
 Dear listmembers,

 I do have a list with six sentences. They start with

 1.)
 2.)
 3.)
 4.)

 Then I entered a description for this forth sentence, and after that I
 would like to continue with:

 5.)
 6.)

 But the problem is, that when I choose numeration in the menu, the
 numeration again starts with 1. How could I change that behaviour?

 Thanks, best
 Jess

I don't remember what you call it, but LyX has buttons to nest paragraphs. 
Nest the descriptive paragraph inside sentence #4, and I believe it should do 
exactly what you want. Not only that, it's very representative of what you're 
doing, because the descriptive paragraph is ABOUT sentence 4. Styles based 
authoring at its best.

SteveT

Steve Litt
Recession Relief Package
http://www.recession-relief.US
Twitter: http://www.twitter.com/stevelitt

Re: Consecutive numeration of lists also after a section in standard-format

[jezZiFeR]

dear steve,

thank you! i´ve asked this question some months ago, and it was  
already solved, but my harddisk had a problem, and after a backup some  
100 mails were sent again automatically. sorry for that, i hope it is  
the only one here in this list…


so, i´ll also try out your solution, it seems very handy.

best*
jess



Am 27.05.2009 um 16:13 schrieb Steve Litt:


On Wednesday 18 March 2009 01:04:27 pm jezZiFeR wrote:

Dear listmembers,

I do have a list with six sentences. They start with

1.)
2.)
3.)
4.)

Then I entered a description for this forth sentence, and after  
that I

would like to continue with:

5.)
6.)

But the problem is, that when I choose numeration in the menu, the
numeration again starts with 1. How could I change that behaviour?

Thanks, best
Jess


I don't remember what you call it, but LyX has buttons to nest  
paragraphs.
Nest the descriptive paragraph inside sentence #4, and I believe it  
should do
exactly what you want. Not only that, it's very representative of  
what you're
doing, because the descriptive paragraph is ABOUT sentence 4. Styles  
based

authoring at its best.

SteveT

Steve Litt
Recession Relief Package
http://www.recession-relief.US
Twitter: http://www.twitter.com/stevelitt

Re: Consecutive numeration of lists also after a section in standard-format

[Guenter Milde]

On 2009-05-27, Steve Litt wrote:
 On Wednesday 18 March 2009 01:04:27 pm jezZiFeR wrote:

 I do have a list with six sentences. They start with

 1.)
 2.)
 3.)
 4.)

 Then I entered a description for this forth sentence, and after that I
 would like to continue with:

 5.)
 6.)

 But the problem is, that when I choose numeration in the menu, the
 numeration again starts with 1. How could I change that behaviour?

 I don't remember what you call it, but LyX has buttons to nest
 paragraphs.  Nest the descriptive paragraph inside sentence #4, and I
 believe it should do exactly what you want. Not only that, it's very
 representative of what you're doing, because the descriptive paragraph
 is ABOUT sentence 4. Styles based authoring at its best.

For the record: if you really want to continue an enumeration after a
top-level interuption, you can use the enumitem module. (Search for
enumitem at http://wiki.lyx.org)

Günter

Re: Consecutive numeration of lists also after a section in standard-format

[Bruce Pourciau]

On May 27, 2009, at 3:49 PM, Guenter Milde wrote:


On 2009-05-27, Steve Litt wrote:

On Wednesday 18 March 2009 01:04:27 pm jezZiFeR wrote:



I do have a list with six sentences. They start with



1.)
2.)
3.)
4.)


Then I entered a description for this forth sentence, and after  
that I

would like to continue with:



5.)
6.)



But the problem is, that when I choose numeration in the menu, the
numeration again starts with 1. How could I change that behaviour?



I don't remember what you call it, but LyX has buttons to nest
paragraphs.  Nest the descriptive paragraph inside sentence #4, and I
believe it should do exactly what you want. Not only that, it's very
representative of what you're doing, because the descriptive  
paragraph

is ABOUT sentence 4. Styles based authoring at its best.


For the record: if you really want to continue an enumeration after a
top-level interuption, you can use the enumitem module. (Search  
for

enumitem at http://wiki.lyx.org)

Günter



This particular request -- to have an enumeration resume after an  
interruption, and often an interruption at the top-level -- appears  
on the list quite frequently. Among the developers, has any thought  
been given to making this a menu option (called Resume Enumeration,  
say) in a future version of LyX?


Bruce

Re: Consecutive numeration of lists also after a section in standard-format

[Vincent van Ravesteijn]

Bruce Pourciau schreef:


On May 27, 2009, at 3:49 PM, Guenter Milde wrote:


On 2009-05-27, Steve Litt wrote:

On Wednesday 18 March 2009 01:04:27 pm jezZiFeR wrote:



I do have a list with six sentences. They start with



1.)
2.)
3.)
4.)



Then I entered a description for this forth sentence, and after that I
would like to continue with:



5.)
6.)



But the problem is, that when I choose numeration in the menu, the
numeration again starts with 1. How could I change that behaviour?



I don't remember what you call it, but LyX has buttons to nest
paragraphs.  Nest the descriptive paragraph inside sentence #4, and I
believe it should do exactly what you want. Not only that, it's very
representative of what you're doing, because the descriptive paragraph
is ABOUT sentence 4. Styles based authoring at its best.


For the record: if you really want to continue an enumeration after a
top-level interuption, you can use the enumitem module. (Search for
enumitem at http://wiki.lyx.org)

Günter



This particular request -- to have an enumeration resume after an 
interruption, and often an interruption at the top-level -- appears 
on the list quite frequently. Among the developers, has any thought 
been given to making this a menu option (called Resume Enumeration, 
say) in a future version of LyX?


Bruce
Yes, I implemented that once, and then someone (guess who ;-)) came up 
with a module that could do it. However, both solutions have their yet 
unsolved problems, so until now, neither of the two has made it in.


Maybe, Gunter and I should have another chat about this.

Vincent

Re: Consecutive numeration of lists also after a section in standard-format

[Steve Litt]

On Wednesday 18 March 2009 01:04:27 pm jezZiFeR wrote:
> Dear listmembers,
>
> I do have a list with six sentences. They start with
>
> 1.)
> 2.)
> 3.)
> 4.)
>
> Then I entered a description for this forth sentence, and after that I
> would like to continue with:
>
> 5.)
> 6.)
>
> But the problem is, that when I choose "numeration" in the menu, the
> numeration again starts with "1". How could I change that behaviour?
>
> Thanks, best
> Jess

I don't remember what you call it, but LyX has buttons to nest paragraphs. 
Nest the descriptive paragraph inside sentence #4, and I believe it should do 
exactly what you want. Not only that, it's very representative of what you're 
doing, because the descriptive paragraph is ABOUT sentence 4. Styles based 
authoring at its best.

SteveT

Steve Litt
Recession Relief Package
http://www.recession-relief.US
Twitter: http://www.twitter.com/stevelitt

Re: Consecutive numeration of lists also after a section in standard-format

[jezZiFeR]

dear steve,

thank you! i´ve asked this question some months ago, and it was  
already solved, but my harddisk had a problem, and after a backup some  
100 mails were sent again automatically. sorry for that, i hope it is  
the only one here in this list…


so, i´ll also try out your solution, it seems very handy.

best*
jess



Am 27.05.2009 um 16:13 schrieb Steve Litt:


On Wednesday 18 March 2009 01:04:27 pm jezZiFeR wrote:

Dear listmembers,

I do have a list with six sentences. They start with

1.)
2.)
3.)
4.)

Then I entered a description for this forth sentence, and after  
that I

would like to continue with:

5.)
6.)

But the problem is, that when I choose "numeration" in the menu, the
numeration again starts with "1". How could I change that behaviour?

Thanks, best
Jess


I don't remember what you call it, but LyX has buttons to nest  
paragraphs.
Nest the descriptive paragraph inside sentence #4, and I believe it  
should do
exactly what you want. Not only that, it's very representative of  
what you're
doing, because the descriptive paragraph is ABOUT sentence 4. Styles  
based

authoring at its best.

SteveT

Steve Litt
Recession Relief Package
http://www.recession-relief.US
Twitter: http://www.twitter.com/stevelitt

Re: Consecutive numeration of lists also after a section in standard-format

[Guenter Milde]

On 2009-05-27, Steve Litt wrote:
> On Wednesday 18 March 2009 01:04:27 pm jezZiFeR wrote:

>> I do have a list with six sentences. They start with

>> 1.)
>> 2.)
>> 3.)
>> 4.)

>> Then I entered a description for this forth sentence, and after that I
>> would like to continue with:

>> 5.)
>> 6.)

>> But the problem is, that when I choose "numeration" in the menu, the
>> numeration again starts with "1". How could I change that behaviour?

> I don't remember what you call it, but LyX has buttons to nest
> paragraphs.  Nest the descriptive paragraph inside sentence #4, and I
> believe it should do exactly what you want. Not only that, it's very
> representative of what you're doing, because the descriptive paragraph
> is ABOUT sentence 4. Styles based authoring at its best.

For the record: if you really want to continue an enumeration after a
"top-level" interuption, you can use the "enumitem" module. (Search for
enumitem at http://wiki.lyx.org)

Günter

Re: Consecutive numeration of lists also after a section in standard-format

[Bruce Pourciau]

On May 27, 2009, at 3:49 PM, Guenter Milde wrote:


On 2009-05-27, Steve Litt wrote:

On Wednesday 18 March 2009 01:04:27 pm jezZiFeR wrote:



I do have a list with six sentences. They start with



1.)
2.)
3.)
4.)


Then I entered a description for this forth sentence, and after  
that I

would like to continue with:



5.)
6.)



But the problem is, that when I choose "numeration" in the menu, the
numeration again starts with "1". How could I change that behaviour?



I don't remember what you call it, but LyX has buttons to nest
paragraphs.  Nest the descriptive paragraph inside sentence #4, and I
believe it should do exactly what you want. Not only that, it's very
representative of what you're doing, because the descriptive  
paragraph

is ABOUT sentence 4. Styles based authoring at its best.


For the record: if you really want to continue an enumeration after a
"top-level" interuption, you can use the "enumitem" module. (Search  
for

enumitem at http://wiki.lyx.org)

Günter



This particular request -- to have an enumeration resume after an  
interruption, and often an interruption at the "top-level" -- appears  
on the list quite frequently. Among the developers, has any thought  
been given to making this a menu option (called Resume Enumeration,  
say) in a future version of LyX?


Bruce

Re: Consecutive numeration of lists also after a section in standard-format

[Vincent van Ravesteijn]

Bruce Pourciau schreef:


On May 27, 2009, at 3:49 PM, Guenter Milde wrote:


On 2009-05-27, Steve Litt wrote:

On Wednesday 18 March 2009 01:04:27 pm jezZiFeR wrote:



I do have a list with six sentences. They start with



1.)
2.)
3.)
4.)



Then I entered a description for this forth sentence, and after that I
would like to continue with:



5.)
6.)



But the problem is, that when I choose "numeration" in the menu, the
numeration again starts with "1". How could I change that behaviour?



I don't remember what you call it, but LyX has buttons to nest
paragraphs.  Nest the descriptive paragraph inside sentence #4, and I
believe it should do exactly what you want. Not only that, it's very
representative of what you're doing, because the descriptive paragraph
is ABOUT sentence 4. Styles based authoring at its best.


For the record: if you really want to continue an enumeration after a
"top-level" interuption, you can use the "enumitem" module. (Search for
enumitem at http://wiki.lyx.org)

Günter



This particular request -- to have an enumeration resume after an 
interruption, and often an interruption at the "top-level" -- appears 
on the list quite frequently. Among the developers, has any thought 
been given to making this a menu option (called Resume Enumeration, 
say) in a future version of LyX?


Bruce
Yes, I implemented that once, and then someone (guess who ;-)) came up 
with a module that could do it. However, both solutions have their yet 
unsolved problems, so until now, neither of the two has made it in.


Maybe, Gunter and I should have another chat about this.

Vincent

Re: Consecutive numeration of lists also after a section in standard-format

[Florian Rubach]

jezZiFeR schrieb:

I could not download that module, I just get a textfile opened in my browser
if click the link of the enumitem module (
http://bugzilla.lyx.org/attachment.cgi?id=3167action=view)

I have already tried to save that file and changed its name to
enumitem.module, but this does not work.

How have I got to do that?

Tahnk you!
What platform are you on? On Windows, you have to make sure that your 
file extensions aren't hidden and you renamed it to 
enumitem.module.cgi without seeing the .cgi extension...
I did not have to run any texhash command like Steve suggested, because 
I am using Miktex, which updates it's filename-database when you install 
the package enumitem through the Miktex Package Manager.


Greetings,
Florian

Re: Consecutive numeration of lists also after a section in standard-format

[jezZiFeR]

 I could not download that module, I just get a textfile opened in my
 browser
 if click the link of the enumitem module (
 http://bugzilla.lyx.org/attachment.cgi?id=3167action=view)

 I have already tried to save that file and changed its name to
 enumitem.module, but this does not work.


  What platform are you on? On Windows, you have to make sure that your
 file extensions aren't hidden and you renamed it to enumitem.module.cgi
 without seeing the .cgi extension...
 I did not have to run any texhash command like Steve suggested, because I
 am using Miktex, which updates it's filename-database when you install the
 package enumitem through the Miktex Package Manager.



Well, now, after running texhash it works – on OSX.
Thank you all!

Jess

Re: Consecutive numeration of lists also after a section in standard-format

[Florian Rubach]

jezZiFeR schrieb:

I could not download that module, I just get a textfile opened in my browser
if click the link of the enumitem module (
http://bugzilla.lyx.org/attachment.cgi?id=3167action=view)

I have already tried to save that file and changed its name to
enumitem.module, but this does not work.

How have I got to do that?

Tahnk you!
What platform are you on? On Windows, you have to make sure that your 
file extensions aren't hidden and you renamed it to 
enumitem.module.cgi without seeing the .cgi extension...
I did not have to run any texhash command like Steve suggested, because 
I am using Miktex, which updates it's filename-database when you install 
the package enumitem through the Miktex Package Manager.


Greetings,
Florian

Re: Consecutive numeration of lists also after a section in standard-format

[jezZiFeR]

 I could not download that module, I just get a textfile opened in my
 browser
 if click the link of the enumitem module (
 http://bugzilla.lyx.org/attachment.cgi?id=3167action=view)

 I have already tried to save that file and changed its name to
 enumitem.module, but this does not work.


  What platform are you on? On Windows, you have to make sure that your
 file extensions aren't hidden and you renamed it to enumitem.module.cgi
 without seeing the .cgi extension...
 I did not have to run any texhash command like Steve suggested, because I
 am using Miktex, which updates it's filename-database when you install the
 package enumitem through the Miktex Package Manager.



Well, now, after running texhash it works – on OSX.
Thank you all!

Jess

Re: Consecutive numeration of lists also after a section in standard-format

[Florian Rubach]

jezZiFeR schrieb:

I could not download that module, I just get a textfile opened in my browser
if click the link of the "enumitem module" (
http://bugzilla.lyx.org/attachment.cgi?id=3167=view)

I have already tried to save that file and changed its name to
"enumitem.module", but this does not work.

How have I got to do that?

Tahnk you!
What platform are you on? On Windows, you have to make sure that your 
file extensions aren't hidden and you renamed it to 
"enumitem.module.cgi" without seeing the .cgi extension...
I did not have to run any texhash command like Steve suggested, because 
I am using Miktex, which updates it's filename-database when you install 
the package enumitem through the Miktex Package Manager.


Greetings,
Florian

Re: Consecutive numeration of lists also after a section in standard-format

[jezZiFeR]

>
> I could not download that module, I just get a textfile opened in my
>> browser
>> if click the link of the "enumitem module" (
>> http://bugzilla.lyx.org/attachment.cgi?id=3167=view)
>>
>> I have already tried to save that file and changed its name to
>> "enumitem.module", but this does not work.
>>
>>
>>  What platform are you on? On Windows, you have to make sure that your
> file extensions aren't hidden and you renamed it to "enumitem.module.cgi"
> without seeing the .cgi extension...
> I did not have to run any texhash command like Steve suggested, because I
> am using Miktex, which updates it's filename-database when you install the
> package enumitem through the Miktex Package Manager.



Well, now, after running texhash it works – on OSX.
Thank you all!

Jess

Consecutive numeration of lists also after a section in standard-format

[jezZiFeR]

Dear listmembers,

I do have a list with six sentences. They start with

1.)
2.)
3.)
4.)

Then I entered a description for this forth sentence, and after that I  
would like to continue with:


5.)
6.)

But the problem is, that when I choose numeration in the menu, the  
numeration again starts with 1. How could I change that behaviour?


Thanks, best
Jess

Re: Consecutive numeration of lists also after a section in standard-format

[Nikos Alexandris]

jezZiFeR:
 I do have a list with six sentences. They start with
 
 1.)
 2.)
 3.)
 4.)

While you are in your description line Use _Shift+Alt+RightArrowKey_ or
the _Increase depth_ button to, well, increase the depth of the line(s)
you want. The enumeration won't break like this.

 Then I entered a description for this forth sentence, and after that I  
 would like to continue with:
 
 5.)
 6.)

Kind regards, Nikos

Re: Consecutive numeration of lists also after a section in standard-format

[Florian Rubach]

jezZiFeR schrieb:

Dear listmembers,

I do have a list with six sentences. They start with

1.)
2.)
3.)
4.)

Then I entered a description for this forth sentence, and after that I 
would like to continue with:


5.)
6.)

But the problem is, that when I choose numeration in the menu, the 
numeration again starts with 1. How could I change that behaviour?


Thanks, best
Jess


You can download the lyx module enumitem.module from 
http://wiki.lyx.org/Tips/Enumitem (instructions on the page). With that, 
you can simply choose a style Enumerate-Resume from the dropdown-list 
of styles.

Remember to reconfigure lyx after placing the module in the right place!

Greetings,
Florian

Re: Consecutive numeration of lists also after a section in standard-format

[Steve Litt]

On Wednesday 18 March 2009 01:48:12 pm Florian Rubach wrote:
 jezZiFeR schrieb:
  Dear listmembers,
 
  I do have a list with six sentences. They start with
 
  1.)
  2.)
  3.)
  4.)
 
  Then I entered a description for this forth sentence, and after that I
  would like to continue with:
 
  5.)
  6.)
 
  But the problem is, that when I choose numeration in the menu, the
  numeration again starts with 1. How could I change that behaviour?
 
  Thanks, best
  Jess

 You can download the lyx module enumitem.module from
 http://wiki.lyx.org/Tips/Enumitem (instructions on the page). With that,
 you can simply choose a style Enumerate-Resume from the dropdown-list
 of styles.
 Remember to reconfigure lyx after placing the module in the right place!

And run texhash.

STeveT

Consecutive numeration of lists also after a section in standard-format

[jezZiFeR]

Dear listmembers,

I do have a list with six sentences. They start with

1.)
2.)
3.)
4.)

Then I entered a description for this forth sentence, and after that I  
would like to continue with:


5.)
6.)

But the problem is, that when I choose numeration in the menu, the  
numeration again starts with 1. How could I change that behaviour?


Thanks, best
Jess

Re: Consecutive numeration of lists also after a section in standard-format

[Nikos Alexandris]

jezZiFeR:
 I do have a list with six sentences. They start with
 
 1.)
 2.)
 3.)
 4.)

While you are in your description line Use _Shift+Alt+RightArrowKey_ or
the _Increase depth_ button to, well, increase the depth of the line(s)
you want. The enumeration won't break like this.

 Then I entered a description for this forth sentence, and after that I  
 would like to continue with:
 
 5.)
 6.)

Kind regards, Nikos

Re: Consecutive numeration of lists also after a section in standard-format

[Florian Rubach]

jezZiFeR schrieb:

Dear listmembers,

I do have a list with six sentences. They start with

1.)
2.)
3.)
4.)

Then I entered a description for this forth sentence, and after that I 
would like to continue with:


5.)
6.)

But the problem is, that when I choose numeration in the menu, the 
numeration again starts with 1. How could I change that behaviour?


Thanks, best
Jess


You can download the lyx module enumitem.module from 
http://wiki.lyx.org/Tips/Enumitem (instructions on the page). With that, 
you can simply choose a style Enumerate-Resume from the dropdown-list 
of styles.

Remember to reconfigure lyx after placing the module in the right place!

Greetings,
Florian

Re: Consecutive numeration of lists also after a section in standard-format

[Steve Litt]

On Wednesday 18 March 2009 01:48:12 pm Florian Rubach wrote:
 jezZiFeR schrieb:
  Dear listmembers,
 
  I do have a list with six sentences. They start with
 
  1.)
  2.)
  3.)
  4.)
 
  Then I entered a description for this forth sentence, and after that I
  would like to continue with:
 
  5.)
  6.)
 
  But the problem is, that when I choose numeration in the menu, the
  numeration again starts with 1. How could I change that behaviour?
 
  Thanks, best
  Jess

 You can download the lyx module enumitem.module from
 http://wiki.lyx.org/Tips/Enumitem (instructions on the page). With that,
 you can simply choose a style Enumerate-Resume from the dropdown-list
 of styles.
 Remember to reconfigure lyx after placing the module in the right place!

And run texhash.

STeveT

Consecutive numeration of lists also after a section in standard-format

[jezZiFeR]

Dear listmembers,

I do have a list with six sentences. They start with

1.)
2.)
3.)
4.)

Then I entered a description for this forth sentence, and after that I  
would like to continue with:


5.)
6.)

But the problem is, that when I choose "numeration" in the menu, the  
numeration again starts with "1". How could I change that behaviour?


Thanks, best
Jess

Re: Consecutive numeration of lists also after a section in standard-format

[Nikos Alexandris]

jezZiFeR:
> I do have a list with six sentences. They start with
> 
> 1.)
> 2.)
> 3.)
> 4.)

While you are in your description line Use _Shift+Alt+RightArrowKey_ or
the _Increase depth_ button to, well, increase the depth of the line(s)
you want. The enumeration won't break like this.

> Then I entered a description for this forth sentence, and after that I  
> would like to continue with:
> 
> 5.)
> 6.)

Kind regards, Nikos

Re: Consecutive numeration of lists also after a section in standard-format

[Florian Rubach]

jezZiFeR schrieb:

Dear listmembers,

I do have a list with six sentences. They start with

1.)
2.)
3.)
4.)

Then I entered a description for this forth sentence, and after that I 
would like to continue with:


5.)
6.)

But the problem is, that when I choose "numeration" in the menu, the 
numeration again starts with "1". How could I change that behaviour?


Thanks, best
Jess


You can download the lyx module "enumitem.module" from 
http://wiki.lyx.org/Tips/Enumitem (instructions on the page). With that, 
you can simply choose a style "Enumerate-Resume" from the dropdown-list 
of styles.

Remember to reconfigure lyx after placing the module in the right place!

Greetings,
Florian

Re: Consecutive numeration of lists also after a section in standard-format

[Steve Litt]

On Wednesday 18 March 2009 01:48:12 pm Florian Rubach wrote:
> jezZiFeR schrieb:
> > Dear listmembers,
> >
> > I do have a list with six sentences. They start with
> >
> > 1.)
> > 2.)
> > 3.)
> > 4.)
> >
> > Then I entered a description for this forth sentence, and after that I
> > would like to continue with:
> >
> > 5.)
> > 6.)
> >
> > But the problem is, that when I choose "numeration" in the menu, the
> > numeration again starts with "1". How could I change that behaviour?
> >
> > Thanks, best
> > Jess
>
> You can download the lyx module "enumitem.module" from
> http://wiki.lyx.org/Tips/Enumitem (instructions on the page). With that,
> you can simply choose a style "Enumerate-Resume" from the dropdown-list
> of styles.
> Remember to reconfigure lyx after placing the module in the right place!

And run texhash.

STeveT

no numeration

[Silvia Ribeiro Calbo]

Hi people,

 Does anyone know how I can begin numerating not at the begining of the article? I 
want a title page with
no numeration.
thanks

.'   . '
   .  .  . '  '
`   .   .
' '
 .'  ___
 ==c(___(o(__(_()
 \=\
  )=\  Sílvia Ribeiro Calbo
 //|\\ 
//|| \\
   // ||  \\
  //  ||   \\

Re: no numeration

[Rich Shepard]

On Wed, 14 Apr 2004, Silvia Ribeiro Calbo wrote:

  Does anyone know how I can begin numerating not at the begining of the
 article? I want a title page with no numeration.

  \setcounter{page}{0}

Rich

-- 
Dr. Richard B. Shepard, President
Applied Ecosystem Services, Inc. (TM)
http://www.appl-ecosys.com

no numeration

[Silvia Ribeiro Calbo]

Hi people,

 Does anyone know how I can begin numerating not at the begining of the article? I 
want a title page with
no numeration.
thanks

.'   . '
   .  .  . '  '
`   .   .
' '
 .'  ___
 ==c(___(o(__(_()
 \=\
  )=\  Sílvia Ribeiro Calbo
 //|\\ 
//|| \\
   // ||  \\
  //  ||   \\

Re: no numeration

[Rich Shepard]

On Wed, 14 Apr 2004, Silvia Ribeiro Calbo wrote:

  Does anyone know how I can begin numerating not at the begining of the
 article? I want a title page with no numeration.

  \setcounter{page}{0}

Rich

-- 
Dr. Richard B. Shepard, President
Applied Ecosystem Services, Inc. (TM)
http://www.appl-ecosys.com

no numeration

[Silvia Ribeiro Calbo]

Hi people,

 Does anyone know how I can begin numerating not at the begining of the article? I 
want a title page with
no numeration.
thanks

.'   .  "   '
>   .  .  . '  '
>"`   .   .
>' '
> .'  ___
> ==c(___(o(__(_()
> \=\
>  )=\  Sílvia Ribeiro Calbo
> //|\\ 
>//|| \\
>   // ||  \\
>  //  ||   \\
>

Re: no numeration

[Rich Shepard]

On Wed, 14 Apr 2004, Silvia Ribeiro Calbo wrote:

>  Does anyone know how I can begin numerating not at the begining of the
> article? I want a title page with no numeration.

  \setcounter{page}{0}

Rich

-- 
Dr. Richard B. Shepard, President
Applied Ecosystem Services, Inc. (TM)
<http://www.appl-ecosys.com>

Re: figure numeration

[Axel Heinrici]

Hi

On Sunday 18 August 2002 18:07, Dekel Tsur wrote:
 On Fri, Aug 16, 2002 at 02:00:24PM +0200, Axel Heinrici wrote:
  I am not sure what you mean.
  Ich can put the \label{...} inside the caption, before the
  caption or afterwards, when I use tex. Everthing stays the
  same. And this is OK! I like this numeration method.
  The problem is lyx. I want lyx to do so.
  And especially I want lyx to take my pictures into the index of
  pictures. At now the lyx-index_of_pictures only lists the tex
  pictures and not the pictures I inserted with lyx itself.
 
  This seems really strange to me.
  Lyx even does not start the caption with: Abbidung
  12.34:. It starts directly with the text written inside
  the float.

 This is because you need to select the 'Caption' layout from the
 layouts list in the toolbar.

This fixed the numeration when it is refered to the picture in the 
text. But the picture still doesn't show up in the Index of 
pictures and the caption doesn't start with Abblidung xx.xx:...

greetings
Axel

Re: figure numeration

[Axel Heinrici]

Hi

On Sunday 18 August 2002 18:07, Dekel Tsur wrote:
 On Fri, Aug 16, 2002 at 02:00:24PM +0200, Axel Heinrici wrote:
  I am not sure what you mean.
  Ich can put the \label{...} inside the caption, before the
  caption or afterwards, when I use tex. Everthing stays the
  same. And this is OK! I like this numeration method.
  The problem is lyx. I want lyx to do so.
  And especially I want lyx to take my pictures into the index of
  pictures. At now the lyx-index_of_pictures only lists the tex
  pictures and not the pictures I inserted with lyx itself.
 
  This seems really strange to me.
  Lyx even does not start the caption with: Abbidung
  12.34:. It starts directly with the text written inside
  the float.

 This is because you need to select the 'Caption' layout from the
 layouts list in the toolbar.

This fixed the numeration when it is refered to the picture in the 
text. But the picture still doesn't show up in the Index of 
pictures and the caption doesn't start with Abblidung xx.xx:...

greetings
Axel

Re: figure numeration

[Axel Heinrici]

Hi

On Sunday 18 August 2002 18:07, Dekel Tsur wrote:
> On Fri, Aug 16, 2002 at 02:00:24PM +0200, Axel Heinrici wrote:
> > I am not sure what you mean.
> > Ich can put the "\label{...}" inside the caption, before the
> > caption or afterwards, when I use tex. Everthing stays the
> > same. And this is OK! I like this numeration method.
> > The problem is lyx. I want lyx to do so.
> > And especially I want lyx to take my pictures into the index of
> > pictures. At now the lyx-index_of_pictures only lists the tex
> > pictures and not the pictures I inserted with lyx itself.
> >
> > This seems really strange to me.
> > Lyx even does not start the caption with: "Abbidung
> > 12.34:". It starts directly with the text written inside
> > the float.
>
> This is because you need to select the 'Caption' layout from the
> layouts list in the toolbar.

This fixed the numeration when it is refered to the picture in the 
text. But the picture still doesn't show up in the Index of 
pictures and the caption doesn't start with "Abblidung xx.xx:..."

greetings
Axel

Re: figure numeration

[Dekel Tsur]

On Fri, Aug 16, 2002 at 02:00:24PM +0200, Axel Heinrici wrote:
 I am not sure what you mean.
 Ich can put the \label{...} inside the caption, before the 
 caption or afterwards, when I use tex. Everthing stays the same.
 And this is OK! I like this numeration method.
 The problem is lyx. I want lyx to do so. 
 And especially I want lyx to take my pictures into the index of 
 pictures. At now the lyx-index_of_pictures only lists the tex 
 pictures and not the pictures I inserted with lyx itself. 
 
 This seems really strange to me. 
 Lyx even does not start the caption with: Abbidung 12.34:.
 It starts directly with the text written inside the float. 

This is because you need to select the 'Caption' layout from the layouts
list in the toolbar.

Re: figure numeration

[Dekel Tsur]

On Thu, Aug 15, 2002 at 05:57:44PM +0200, Axel Heinrici wrote:
 \begin{figure}[h] 

Never use [h] as a float placement.

Re: figure numeration

[Dekel Tsur]

On Fri, Aug 16, 2002 at 02:00:24PM +0200, Axel Heinrici wrote:
 I am not sure what you mean.
 Ich can put the \label{...} inside the caption, before the 
 caption or afterwards, when I use tex. Everthing stays the same.
 And this is OK! I like this numeration method.
 The problem is lyx. I want lyx to do so. 
 And especially I want lyx to take my pictures into the index of 
 pictures. At now the lyx-index_of_pictures only lists the tex 
 pictures and not the pictures I inserted with lyx itself. 
 
 This seems really strange to me. 
 Lyx even does not start the caption with: Abbidung 12.34:.
 It starts directly with the text written inside the float. 

This is because you need to select the 'Caption' layout from the layouts
list in the toolbar.

Re: figure numeration

[Dekel Tsur]

On Thu, Aug 15, 2002 at 05:57:44PM +0200, Axel Heinrici wrote:
 \begin{figure}[h] 

Never use [h] as a float placement.

Re: figure numeration

[Dekel Tsur]

On Fri, Aug 16, 2002 at 02:00:24PM +0200, Axel Heinrici wrote:
> I am not sure what you mean.
> Ich can put the "\label{...}" inside the caption, before the 
> caption or afterwards, when I use tex. Everthing stays the same.
> And this is OK! I like this numeration method.
> The problem is lyx. I want lyx to do so. 
> And especially I want lyx to take my pictures into the index of 
> pictures. At now the lyx-index_of_pictures only lists the tex 
> pictures and not the pictures I inserted with lyx itself. 
> 
> This seems really strange to me. 
> Lyx even does not start the caption with: "Abbidung 12.34:".
> It starts directly with the text written inside the float. 

This is because you need to select the 'Caption' layout from the layouts
list in the toolbar.

Re: figure numeration

[Dekel Tsur]

On Thu, Aug 15, 2002 at 05:57:44PM +0200, Axel Heinrici wrote:
> \begin{figure}[h] 

Never use [h] as a float placement.

Re: figure numeration

[Axel Heinrici]

Hi

On Thursday 15 August 2002 18:22, Andre Poenitz wrote:
 On Thu, Aug 15, 2002 at 05:57:44PM +0200, Axel Heinrici wrote:
  Everyting works fine with this.
  The caption starts with: Abbildung 4.2: Funktion...
  This is used in Subsection 4.1.5 but the number of the picture
  is 4.2.

 What happens if you put the label inside the caption?

I am not sure what you mean.
Ich can put the \label{...} inside the caption, before the 
caption or afterwards, when I use tex. Everthing stays the same.
And this is OK! I like this numeration method.
The problem is lyx. I want lyx to do so. 
And especially I want lyx to take my pictures into the index of 
pictures. At now the lyx-index_of_pictures only lists the tex 
pictures and not the pictures I inserted with lyx itself. 

This seems really strange to me. 
Lyx even does not start the caption with: Abbidung 12.34:.
It starts directly with the text written inside the float. 

greetings 
Axel

p.s. Your message arrived twice (for me and the list). This is 
difficult to handle because only one is seen by other list members. 
So the message ID in the reply is likely to be wrong when I reply.

Re: figure numeration

[Axel Heinrici]

Hi

On Thursday 15 August 2002 18:22, Andre Poenitz wrote:
 On Thu, Aug 15, 2002 at 05:57:44PM +0200, Axel Heinrici wrote:
  Everyting works fine with this.
  The caption starts with: Abbildung 4.2: Funktion...
  This is used in Subsection 4.1.5 but the number of the picture
  is 4.2.

 What happens if you put the label inside the caption?

I am not sure what you mean.
Ich can put the \label{...} inside the caption, before the 
caption or afterwards, when I use tex. Everthing stays the same.
And this is OK! I like this numeration method.
The problem is lyx. I want lyx to do so. 
And especially I want lyx to take my pictures into the index of 
pictures. At now the lyx-index_of_pictures only lists the tex 
pictures and not the pictures I inserted with lyx itself. 

This seems really strange to me. 
Lyx even does not start the caption with: Abbidung 12.34:.
It starts directly with the text written inside the float. 

greetings 
Axel

p.s. Your message arrived twice (for me and the list). This is 
difficult to handle because only one is seen by other list members. 
So the message ID in the reply is likely to be wrong when I reply.

Re: figure numeration

[Axel Heinrici]

Hi

On Thursday 15 August 2002 18:22, Andre Poenitz wrote:
> On Thu, Aug 15, 2002 at 05:57:44PM +0200, Axel Heinrici wrote:
> > Everyting works fine with this.
> > The caption starts with: "Abbildung 4.2: Funktion..."
> > This is used in Subsection 4.1.5 but the number of the picture
> > is 4.2.
>
> What happens if you put the label inside the caption?
>
I am not sure what you mean.
Ich can put the "\label{...}" inside the caption, before the 
caption or afterwards, when I use tex. Everthing stays the same.
And this is OK! I like this numeration method.
The problem is lyx. I want lyx to do so. 
And especially I want lyx to take my pictures into the index of 
pictures. At now the lyx-index_of_pictures only lists the tex 
pictures and not the pictures I inserted with lyx itself. 

This seems really strange to me. 
Lyx even does not start the caption with: "Abbidung 12.34:".
It starts directly with the text written inside the float. 

greetings 
Axel

p.s. Your message arrived twice (for me and the list). This is 
difficult to handle because only one is seen by other list members. 
So the message ID in the reply is likely to be wrong when I reply.

figure numeration

[Axel Heinrici]

Hi

I have a problem with the numeration of figures. I use lyx 1.2 and 
document layout is report.
I used some tex commands to put in some pictures in my document. 
This was just because I wantet to label things inside the picture.
I used something like this:

\begin{figure}[h] 
\unitlength1cm \begin{picture}(11,10) 
\put(0,0){\includegraphics[width=6cm,height=10cm]{Bilder/Doppeldiode}} 
\put(7,9){Paralleler Strahl: Beide Hälften} 
\put(7,1.8){...

\end{picture} \caption[Funktion der 
Autofokusregelung.]{Funktion } \
\label{Doppeldiode} 
\end{figure}

Everyting works fine with this.
The caption starts with: Abbildung 4.2: Funktion...
This is used in Subsection 4.1.5 but the number of the picture is 
4.2. Also every reference is done as 4.2
When I use a float with lyx the picture is referred to picture 
4.1.5. I prefer refering to it as 4.2, but anyway it should always 
be done in the same way.
At the end of my document I placed a list of pictures with lyx 
(Einfügen - Listen  Inhalt - Liste der Abbildungen). The picture 
4.1.5 is missing there completely. Only the pictures inserted with 
tex commands are listed.
What is wrong here?
Or is lyx not working together with the tex commands I used.  I 
cannot abandon the tex parts because of the labeling. So, do I have 
to use the tex way during the complete document?

greetings
Axel

Re: figure numeration

[Andre Poenitz]

On Thu, Aug 15, 2002 at 05:57:44PM +0200, Axel Heinrici wrote:
 Everyting works fine with this.
 The caption starts with: Abbildung 4.2: Funktion...
 This is used in Subsection 4.1.5 but the number of the picture is 
 4.2.

What happens if you put the label inside the caption?

Andre'

-- 
Those who desire to give up Freedom in order to gain Security,
will not have, nor do they deserve, either one. (T. Jefferson)

figure numeration

[Axel Heinrici]

Hi

I have a problem with the numeration of figures. I use lyx 1.2 and 
document layout is report.
I used some tex commands to put in some pictures in my document. 
This was just because I wantet to label things inside the picture.
I used something like this:

\begin{figure}[h] 
\unitlength1cm \begin{picture}(11,10) 
\put(0,0){\includegraphics[width=6cm,height=10cm]{Bilder/Doppeldiode}} 
\put(7,9){Paralleler Strahl: Beide Hälften} 
\put(7,1.8){...

\end{picture} \caption[Funktion der 
Autofokusregelung.]{Funktion } \
\label{Doppeldiode} 
\end{figure}

Everyting works fine with this.
The caption starts with: Abbildung 4.2: Funktion...
This is used in Subsection 4.1.5 but the number of the picture is 
4.2. Also every reference is done as 4.2
When I use a float with lyx the picture is referred to picture 
4.1.5. I prefer refering to it as 4.2, but anyway it should always 
be done in the same way.
At the end of my document I placed a list of pictures with lyx 
(Einfügen - Listen  Inhalt - Liste der Abbildungen). The picture 
4.1.5 is missing there completely. Only the pictures inserted with 
tex commands are listed.
What is wrong here?
Or is lyx not working together with the tex commands I used.  I 
cannot abandon the tex parts because of the labeling. So, do I have 
to use the tex way during the complete document?

greetings
Axel

Re: figure numeration

[Andre Poenitz]

On Thu, Aug 15, 2002 at 05:57:44PM +0200, Axel Heinrici wrote:
 Everyting works fine with this.
 The caption starts with: Abbildung 4.2: Funktion...
 This is used in Subsection 4.1.5 but the number of the picture is 
 4.2.

What happens if you put the label inside the caption?

Andre'

-- 
Those who desire to give up Freedom in order to gain Security,
will not have, nor do they deserve, either one. (T. Jefferson)

figure numeration

[Axel Heinrici]

Hi

I have a problem with the numeration of figures. I use lyx 1.2 and 
document layout is report.
I used some tex commands to put in some pictures in my document. 
This was just because I wantet to label things inside the picture.
I used something like this:

\begin{figure}[h] 
\unitlength1cm \begin{picture}(11,10) 
\put(0,0){\includegraphics[width=6cm,height=10cm]{Bilder/Doppeldiode}} 
\put(7,9){Paralleler Strahl: Beide Hälften} 
\put(7,1.8){...

\end{picture} \caption[Funktion der 
Autofokusregelung.]{Funktion } \
\label{Doppeldiode} 
\end{figure}

Everyting works fine with this.
The caption starts with: "Abbildung 4.2: Funktion..."
This is used in Subsection 4.1.5 but the number of the picture is 
4.2. Also every reference is done as 4.2
When I use a float with lyx the picture is referred to picture 
4.1.5. I prefer refering to it as 4.2, but anyway it should always 
be done in the same way.
At the end of my document I placed a "list of pictures" with lyx 
(Einfügen -> Listen & Inhalt -> Liste der Abbildungen). The picture 
4.1.5 is missing there completely. Only the pictures inserted with 
tex commands are listed.
What is wrong here?
Or is lyx not working together with the tex commands I used.  I 
cannot abandon the tex parts because of the labeling. So, do I have 
to use "the tex way" during the complete document?

greetings
Axel

Re: figure numeration

[Andre Poenitz]

On Thu, Aug 15, 2002 at 05:57:44PM +0200, Axel Heinrici wrote:
> Everyting works fine with this.
> The caption starts with: "Abbildung 4.2: Funktion..."
> This is used in Subsection 4.1.5 but the number of the picture is 
> 4.2.

What happens if you put the label inside the caption?

Andre'

-- 
Those who desire to give up Freedom in order to gain Security,
will not have, nor do they deserve, either one. (T. Jefferson)