Re: [maemo-developers] wlan monitor mode
Hi, I've also tested the aireplay suite. The problem, why the tools are not really running, is that the driver must be patched to be able to send packets in monitor mode. For i386 environments most common driver projects like mad-wifi or prism54.org had integrated that feature to their drivers. I had read into it but had to find out that my C and wifi harware knowledge isn't enough at the moment for implementing this. Also I havn't found your module sources for the cx3110x in the repository. Is it closed source?? Where to find it? The prism54 team for example had to reverse enginere the protocol between UMAC(the binary) and LMAC(embedded wifi ARM CPU) by investigating the chip behaviour. As I expect that nokia has bought some thousand chips at conexant I think you will have the firmware and protocol specification and will be perhaps able to implement it quite easy. It would be a great feature if you can do this. I will try to find the driver patches from the prism54 project. Perhaps it isn't that magic to implement it. Greets BernhardOn 2/15/06, Samuel Ortiz [EMAIL PROTECTED] wrote: On Tue, 14 Feb 2006, ext Collin R. Mulliner wrote: Hi, I have dsniff and friends working ok, I don't know why airodump doesn't work since it should also only require pcap. Also my device seems to suck up battery quite fast during monitor mode In monitor mode, the WLAN chipset is running at full power, of course. So,yes, your battery will last about 3 hours if you keep on sniffing 802.11packets. Why doesn't iwconfig work noramlly while the device is in monitor mode?Because my code sucks.Cheers,Samuel.___maemo-developers mailing listmaemo-developers@maemo.org https://maemo.org/mailman/listinfo/maemo-developers ___ maemo-developers mailing list maemo-developers@maemo.org https://maemo.org/mailman/listinfo/maemo-developers
Re: [maemo-developers] GStreamer and 770
On Tuesday, 7. February 2006 16:56, Matti Reijonen wrote: Right now I'm looking for simple example to get started on gstreamer, I could not use hello world on: http://gstreamer.freedesktop.org/data/doc/gstreamer/head/manual/html/chapte r-helloworld.html#section-helloworld gstreamer site because it uses ogg and worbis parsers and decoders and I don't have those installed on my maemo environment, (or at least that was what I found out when I try run that example).. A bit late now, but if you need ogg and vorbis under maemo, the libs and tools compile and run well as is. Just download the sources from xiph.org (libogg, libvorbis and vorbis-tools should do it). -Teemu ___ maemo-developers mailing list maemo-developers@maemo.org https://maemo.org/mailman/listinfo/maemo-developers
Re: [maemo-developers] GStreamer and 770
On Thu, 2006-02-16 at 13:18 +0100, Koen Kooi wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Teemu Nikkilä wrote: On Tuesday, 7. February 2006 16:56, Matti Reijonen wrote: Right now I'm looking for simple example to get started on gstreamer, I could not use hello world on: http://gstreamer.freedesktop.org/data/doc/gstreamer/head/manual/html/chapte r-helloworld.html#section-helloworld gstreamer site because it uses ogg and worbis parsers and decoders and I don't have those installed on my maemo environment, (or at least that was what I found out when I try run that example).. A bit late now, but if you need ogg and vorbis under maemo, the libs and tools compile and run well as is. Just download the sources from xiph.org (libogg, libvorbis and vorbis-tools should do it). You'd want to use tremor for the decoding, since the 770 doesn't have an FPU. Also on the information track, the Tremor plugin in GStreamer 0.10 works fine on the 770. Christian ___ maemo-developers mailing list maemo-developers@maemo.org https://maemo.org/mailman/listinfo/maemo-developers
RE: [maemo-developers] hildon-lgpl is now gone
Hi Devesh, -Original Message- From: Devesh Kothari [mailto:[EMAIL PROTECTED] Sent: 16 February, 2006 09:51 To: Pionchon Luc (Nokia-M/Helsinki) Cc: maemo-developers Subject: Re: [maemo-developers] hildon-lgpl is now gone ext Luc Pionchon wrote: Dear friends, last night hildon-lgpl passed away :( After long discussions, we created hildon-gpl3 (No, joking.) The historical hildon-lgpl is now merged into hildon-libs. Expect more changes into hildon-libs in the coming days. Luc, It would be nice to have a wiki page which provides a kind of porting instructions due to these changes, e.g - change in automake scripts etc due to change in package names - changes to include files We still provide a dummy hildon-lgpl package requireing hildon-libs, to preserve compatibility A few other changes are planned for the coming weeks, adding new APIs, we will provide then migration instructions. If you have any problem, please report in this thread, thanks! Also the impact on language bindings like C++/hildon bindings, python bindings etc They need synchronization, but impact is minor because it is basically just a package name change. All widgets remain the same, no API change. BTW GPL3??? isnt that still in draft proposal stage? You are right, but we thought that it is the right licence because the lib is draft too. Draft licence for draft software, make sense, no ? (*) luc Devesh For the ones who like to play with the latest source, stay synchronized! luc ___ maemo-developers mailing list maemo-developers@maemo.org https://maemo.org/mailman/listinfo/maemo-developers (*) Devesh, this is a *joke* ;) ___ maemo-developers mailing list maemo-developers@maemo.org https://maemo.org/mailman/listinfo/maemo-developers
Re: [maemo-developers] hildon-lgpl is now gone
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 [EMAIL PROTECTED] wrote: Hi Devesh, snip We still provide a dummy hildon-lgpl package requireing hildon-libs, to preserve compatibility A few other changes are planned for the coming weeks, adding new APIs, we will provide then migration instructions. Is there any ETA on the new APIs and such? I'll have some time in the next weeks to update the maemo 1.0RC bits in OpenEmbedded to a recent 'release', but as I'm lazy I want to do it right the first time :). regards, Koen -BEGIN PGP SIGNATURE- Version: GnuPG v1.4.1 (Darwin) iD8DBQFD9LewMkyGM64RGpERArGuAJ0W/zy7JKzzYlwRFRMpNdeNsSpxLQCffQZE HV9DnDqySmb/t23lqjsSqPQ= =oBHu -END PGP SIGNATURE- ___ maemo-developers mailing list maemo-developers@maemo.org https://maemo.org/mailman/listinfo/maemo-developers
Re: [maemo-developers] GStreamer and 770
Christian Fredrik Kalager Schaller wrote: Also on the information track, the Tremor plugin in GStreamer 0.10 works fine on the 770. Interesting. So what exactly can I do to let the n770 video and audio player recognize ogg vorbis audio data? Frantisek ___ maemo-developers mailing list maemo-developers@maemo.org https://maemo.org/mailman/listinfo/maemo-developers
