RE: MI Create points
Hello Jure - Just select the points in the mapper (make it editable) then Edit-->Clear Map Objects Only, then rerun Create Points on the correct columns; Or Table-->Maintenance-->Table Structure on the table and unselect the Table is Mappable box. This will clear the slate, then rerun Create Points. Regards, Lindsay Giles Senior GIS Analyst AXYS Environmental Consulting Ltd Suite 600-555 4th Ave. SW Calgary, AB T2P 3E7 e-mail: [EMAIL PROTECTED] Main Office:403-269-5150 Direct Line:403-750-7671 Fax:403-269-5245 Visit our web site at http://www.axys.net -Original Message- From: Jure Ravnik [SMTP:[EMAIL PROTECTED]] Sent: Tuesday, May 16, 2000 7:43 AM To: '[EMAIL PROTECTED]' Subject: MI Create points Hi listers, I've created a native MI table with Name XY columns. The projection is NonEarth. When I ran "Create Point" I choose wrong columns for X and Y. Instead of X=X I chose X=Y and Y=X. Running "Create Points" again doesn't move the locations of points. I know I can export to TXT and back to a new table. Must I really do this? Thanks, Jure Ravnik Ecological Engineering Institute Ljubljanska 9 2000 Maribor Slovenia Tel:+ 386 2 300 48 11 Fax:+ 386 2 300 48 35 mailto:[EMAIL PROTECTED] -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED] -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
RE: MI Create points
Jure, Go to Table > Maintenance > Table Structure, select the table in question, and uncheck the Table Is Mappable checkbox. This will remove all the mappable stuff associated with the table, allowing you to rerun the Create Points the right way. Good luck, Jeff James Vice President Sage Software, Inc. 3423 Piedmont Road NE Suite 500 Atlanta, Georgia 30305 www.sagesoft.com <http://www.sagesoft.com> Phone: 404.262.7478.x12 Fax: 404.832.3366 eFax: 520.222.2020 -Original Message- From: Jure Ravnik [mailto:[EMAIL PROTECTED]] Sent: Tuesday, May 16, 2000 9:43 AM To: '[EMAIL PROTECTED]' Subject: MI Create points Hi listers, I've created a native MI table with Name XY columns. The projection is NonEarth. When I ran "Create Point" I choose wrong columns for X and Y. Instead of X=X I chose X=Y and Y=X. Running "Create Points" again doesn't move the locations of points. I know I can export to TXT and back to a new table. Must I really do this? Thanks, Jure Ravnik Ecological Engineering Institute Ljubljanska 9 2000 Maribor Slovenia Tel:+ 386 2 300 48 11 Fax:+ 386 2 300 48 35 mailto:[EMAIL PROTECTED] -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED] -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
RE: MI Create points
Hi Jure Go to Table | Maintenance | Table Structure, uncheck "Table Is Mappable" and then click Ok. This will remove the map objects from your table, allowing you to start over again with X=X and Y=Y. Regards, James James L Marlow Director, Geographic Information Systems Channel Marketing Corporation 15032 Beltway Drive Addison, Texas 75001 Telephone 1 (972) 858-9600 extension 331 Facsimile 1 (972) 858-9601 email: [EMAIL PROTECTED] www: http://cmcus.com > -Original Message- > From: Jure Ravnik [mailto:[EMAIL PROTECTED]] > Sent: Tuesday, May 16, 2000 8:43 AM > To: '[EMAIL PROTECTED]' > Subject: MI Create points > > > Hi listers, > > I've created a native MI table with > > Name XY > > columns. The projection is NonEarth. > When I ran "Create Point" I choose wrong columns > for X and Y. Instead of X=X I chose X=Y and Y=X. > > Running "Create Points" again doesn't move > the locations of points. > > I know I can export to TXT and back to a new table. > Must I really do this? > > Thanks, > > Jure Ravnik > > Ecological Engineering Institute > Ljubljanska 9 > 2000 Maribor > Slovenia > Tel:+ 386 2 300 48 11 > Fax:+ 386 2 300 48 35 > mailto:[EMAIL PROTECTED] > > -- > To unsubscribe from this list, send e-mail to > [EMAIL PROTECTED] and put > "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED] > -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
MI Create points
Hi listers, I've created a native MI table with Name XY columns. The projection is NonEarth. When I ran "Create Point" I choose wrong columns for X and Y. Instead of X=X I chose X=Y and Y=X. Running "Create Points" again doesn't move the locations of points. I know I can export to TXT and back to a new table. Must I really do this? Thanks, Jure Ravnik Ecological Engineering Institute Ljubljanska 9 2000 Maribor Slovenia Tel:+ 386 2 300 48 11 Fax:+ 386 2 300 48 35 mailto:[EMAIL PROTECTED] -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
RE: MI Create Points along a polyline
Tony, This sounds a lot like a Rural Addressing issue. I am currently developing applications to assist in this area, let me know exactly what you require and I will develop a small application to generate the points for you. B.T.W. If anybody else in the List is interested in this application, let me know and I'll forward it on to you as well. Hope this helps, Paul Grambauer Cessnock City Council PO Box 152, 68-72 Vincent St, Cessnock, 2325 Phone : +61 02 49934192 Fax : +61 02 49934200 Email : [EMAIL PROTECTED] -- From: Tony Kelava[SMTP:[EMAIL PROTECTED]] Sent: Tuesday, January 18, 2000 5:19 PM To: [EMAIL PROTECTED] Subject: MI Create Points along a polyline Hi All, I was wondering if anyone had used the program to create points along a polyline at a nominated interval and then somehow labelled each point sequentially. ie I have a road that covers 300 km and I have created points at 10m intervals. I now need to attribute each point sequeatially from the start automatically and get 30,000 points in the database. Any ideas? Regards Tony -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED] -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
Re: MI Create Points along a polyline
Hi! It's not a problem. Try to use: http://members.xoom.com/geosoft99/gis/util/distmark.zip ([EMAIL PROTECTED]) It must help you. Dima Omely http://members.xoom.com/geosoft99 Tony Kelava wrote: > Hi All, > > I was wondering if anyone had used the program to create points along a polyline at >a nominated interval and then somehow labelled each point sequentially. ie I have a >road that covers 300 km and I have created points at 10m intervals. I now need to >attribute each point sequeatially from the start automatically and get 30,000 points >in the database. > > Any ideas? > > Regards > > Tony > > -- > To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put > "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED] -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
MI Create Points along a polyline
Hi All, I was wondering if anyone had used the program to create points along a polyline at a nominated interval and then somehow labelled each point sequentially. ie I have a road that covers 300 km and I have created points at 10m intervals. I now need to attribute each point sequeatially from the start automatically and get 30,000 points in the database. Any ideas? Regards Tony -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
Can MI create points as it opens an Access DB?
Here's something I've been able to do in ArcView, but have no recent experience with in MI. Does anyone have any experience with this and/or suggestions to offer? I have an Access97 database that includes latitude and longitude fields. I'd like to be able to open an MI table of that database so that all records have point objects affiliated with them, based on the most up-to-date values in the latitude and longitude fields. It'd be nice to avoid having to create points by hand each time. In the past, I've used a somewhat clunky workaround -- I wrote an MB program to create the points. Unfortunately, one has to remember to run the .MBX every time information changes in the Access database. ArcView can 'create the points' (or whatever the equivalent ESRI term is!) anew every time the data is opened and added to a view (=mapper). Does MI have a similar functionality? Thanks for any help you can offer. Sincerely, Eric Johnson [EMAIL PROTECTED] -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
RE: MI Create points
Litea, If you can't create the points correctly using MapInfo on its own, then you obviously would not have much success using Discover, as Discover is an add-on to MapInfo (written by Encom Technology) that still uses the basic functionality of MapInfo. Possible causes are: 1) You are using an incorrect projection and/or datum. 2) Are you specifying easting for the X coordinate and northing for the Y coordinate? 3) If you have previously created points, do you then go to Table > Maintenance > Table Structure and remove the checkmark that says "Table is Mappable" PRIOR to choosing Table > Create Points? If you don't and you just try to re-create points, the original map table will not be re-created. Regards, William Donaldson Senior Computing Geologist (GIS) Encom Technology Level 3 - 35 Outram Street, West Perth, WA 6005 AUSTRALIA PO Box 1572, West Perth, WA 6872 AUSTRALIA ph: +61 + 8 9321 1788 fax: +61 +8 9321 1799 email: [EMAIL PROTECTED] Visit our website at http://www.encom.com.au -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Litea Biukoto Sent: Thursday, 23 September 1999 12:55 To: MapInfo-L (E-mail) Subject: MI Create points Importance: High I've tried to map a table of positions using Table\ Create Points but haven't had much success. The points appear as much as 2km out in both the northings and eastings! I tried creating the points using Discover but Discover keeps blowing. Has anyone else come across the same problem and found a solution? Please share it with me. TIA Litea -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED] -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]
MI Create points
I've tried to map a table of positions using Table\ Create Points but haven't had much success. The points appear as much as 2km out in both the northings and eastings! I tried creating the points using Discover but Discover keeps blowing. Has anyone else come across the same problem and found a solution? Please share it with me. TIA Litea -- To unsubscribe from this list, send e-mail to [EMAIL PROTECTED] and put "unsubscribe MAPINFO-L" in the message body, or contact [EMAIL PROTECTED]