Re: [MeeGo-dev] DVB support on MeeGo
On Fri, 2010-10-29 at 11:58 +0200, Michał Sawicz wrote: Dnia 2010-10-29, pią o godzinie 10:04 +0530, vijay singh pisze: Please let me know if any one tested DVB-t on MeeGo or any plan to provide support for all DVB device in MeeGo. Can you confirm that this adapter works with other distributions? If that's the case, the main issue would be to ship the drivers - maybe as a separate package? Also it needs verifying that gstreamer is built with dvb support for meego - that could probably be shipped as a separate package, too. A media player with dvb support (i.e. Totem) would also be needed. IMO there are many USB DVB-T dongles and it would be great if MeeGo could support them out of the box or after just installing some 'TV Support' metapackage. it will work for Ubuntu10.04. ___ MeeGo-dev mailing list MeeGo-dev@meego.com http://lists.meego.com/listinfo/meego-dev
Re: [MeeGo-dev] DVB support on MeeGo
It is Digital Video Broadcast. //http://linuxtv.org/wiki/index.php/How_to_install_DVB_device_drivers //http://linuxtv.org/wiki/index.php/What_is_V4L_or_DVB%3F On Wed, 2010-10-27 at 23:55 -0600, Clark, Joel wrote: Top Google hit DVB = Democratic Voice of Burma. -Original Message- From: meego-dev-boun...@meego.com [mailto:meego-dev-boun...@meego.com] On Behalf Of vijay singh Sent: Wednesday, October 27, 2010 10:43 PM To: meego-dev@meego.com; meego-ker...@meego.com Subject: [MeeGo-dev] DVB support on MeeGo Hello, I want to know do we have support for DVB under MeeGo 1.0 or planned MeeGo 1.1 release. Bye-- ___ MeeGo-dev mailing list MeeGo-dev@meego.com http://lists.meego.com/listinfo/meego-dev ___ MeeGo-dev mailing list MeeGo-dev@meego.com http://lists.meego.com/listinfo/meego-dev
Re: [MeeGo-dev] DVB support on MeeGo
Hi, Currently it is not getting detected with MeeGo1.0 release. I am testing below DVB-t device. CINERGY DT USB XS. //http://www.terratec.net/en/products/tv/dvbt.html Please let me know if any one tested DVB-t on MeeGo or any plan to provide support for all DVB device in MeeGo. Cheers-- On Thu, 2010-10-28 at 13:29 -0700, Rudolf Streif wrote: I am afraid we are losing the focus in regards to Vijay's original question. Vijay did not say for what type of device he is looking for DVB support from MeeGo. Digital television, DVB-T and ATSC, requires different antennae then analog TV for UHF/VHF. For those the aerials had to be pointed to the transmitter. For DTV that is typically not necessary. It is possible to receive the signals with simple rabbit ears even from inside a home. However, that is as usual dependent on environmental and other factors. Rudi On Thu, Oct 28, 2010 at 1:05 PM, Ross Burton r...@linux.intel.com wrote: On Thu, 2010-10-28 at 21:40 +0200, Randolph Dohm wrote: Hi Ross, no, it is not about DVB-H, that is dead born, it is about DVB-T. So users can watch TV without payment like in any TV. That makes the success, if it is default in. Nokias Key. If I want to watch DVB-T at home I need a rather large aerial that is aimed at the transmitter. How does that work on a mobile device? Ross -- Intel Open Source Technology Centre http://oss.intel.com/ ___ MeeGo-dev mailing list MeeGo-dev@meego.com http://lists.meego.com/listinfo/meego-dev ___ MeeGo-dev mailing list MeeGo-dev@meego.com http://lists.meego.com/listinfo/meego-dev
[MeeGo-dev] DVB support on MeeGo
Hello, I want to know do we have support for DVB under MeeGo 1.0 or planned MeeGo 1.1 release. Bye-- ___ MeeGo-dev mailing list MeeGo-dev@meego.com http://lists.meego.com/listinfo/meego-dev
Re: [MeeGo-dev] Beagleboard kernel config / sgx setup?
On Wed, 2010-07-14 at 09:54 +0300, Ameya Palande wrote: Hi Amit, On Wed, 2010-07-14 at 07:23 +0200, ext Amit Pundir wrote: On Wed, Jul 14, 2010 at 9:12 AM, vijay singh testmrs@gmail.com wrote: On Tue, 2010-07-13 at 18:35 +0530, Amit Pundir wrote: On Fri, Jul 9, 2010 at 11:50 PM, Till Harbaum / Lists li...@harbaum.org wrote: Hi, Am Donnerstag 08 Juli 2010 schrieb William Mills: This is an excellent page! Much better than the piece meal stuff we had before. Thanks. Hopefully somebody will make use of it. Hi, Today is my first day @Meego, so my questions may sound stupid.. though I have worked on Beagleboard/Openembedded before. I'm facing some issues while building Beagleboard rootfs image. I'm following the instructions on this page: http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch Am I suppose to set-up and run those instructions in a Scratchbox like environment? If answer is yes then that is the cause of my problem because I have not set-up any such environment. If answer is no then here is my set-up: I'm running Ubuntu-9.10 on my host machine. I have installed the necessary packages as mentioned here: http://wiki.meego.com/Image_Creation#Requirements and running the latest development version of mic-image-creator from here: http://wiki.meego.com/Image_Creation#From_Development_Git_Tree After all this set-up, I decided to give it a shot but I got the following error: -- $ sudo mic-image-creator --run-mode=0 --cache=mycachedir --format=fs --arch=armv7l --config=../meego-handset-armv7l-beagle-1.0.80.8.20100630.ks [main] use_comps=1 default_ks=default.ks cachedir=/var/tmp/cache distro_name=MeeGo image_format=livecd tmpdir=/var/tmp outdir=. Run mode: legacy Geting repomd.xml from repo handset... Getting primary.sqlite from repo handset... Getting patterns repodata/77c704dfd2ab7342491f74496c6c92c7d4fa07f0e7caa3c217c7a2c559e63374-patterns.xml.gz from repo handset... Getting comps repodata/87659030459ca748c117946801759b1e912033be1478c6584633f1621a8f588f-comps.xml.gz from repo handset... Geting repomd.xml from repo MeeGo-Trunk... Getting primary.sqlite from repo MeeGo-Trunk... Getting patterns repodata/faeb6b4db83441a1a80a162a29198bc39594f5bc937f2436b4752adbe77e5ad3-patterns.xml.gz from repo MeeGo-Trunk... [u'armv7l'] MeeGo release 1.0.80 Target arch: armv7l Traceback (most recent call last): File /usr/bin/mic-image-creator, line 806, in module ret = main() File /usr/bin/mic-image-creator, line 753, in main creator.install() File /usr/lib/python2.6/dist-packages/mic/imgcreate/creator.py, line 746, in install ayum = LiveCDYum(self._recording_pkgs, target_arch = self.target_arch) File /usr/lib/python2.6/dist-packages/mic/imgcreate/yuminst.py, line 50, in __init__ self.arch.setup_arch(target_arch) AttributeError: 'LiveCDYum' object has no attribute 'arch' -- Kindly let me know what am I doing wrong here. Thanks for your concern. regards, Amit Pundir Till: You also seem to be running on 10.04. Do you see the following error after the mic-image-creator step: Yes, i have also been ignoring it. But now that you mention it i remember that i wanted to add this to the wiki page, so people following my instructions don't get irritated by this. Is the new beagleboard available in germany already? The 128MB RAM of the original one seem to be critical and i'd like to give the new one a test and see whether the gui loads faster. Till Did you install all the depedency (check at below page) : //http://wiki.meego.com/Image_Creation#Installation Yes I did and also confirmed it by running the following command as mentioned in the wiki page: -- $ sudo ./tools/mic-check-alldeps Checking autoconf... autoconf installed . Checking version of squashfs-tools...OK You are ready for running Image Creator!!! -- I followed the same page, and could create rootfs for beagle board successfully. My host OS is Ubuntu 10.04 x86-32 Cheers, Ameya. For me it also working. same configuration. Regards, Vij ___ MeeGo-dev mailing list MeeGo-dev@meego.com http://lists.meego.com/listinfo/meego-dev ___ MeeGo-dev mailing list MeeGo-dev@meego.com http://lists.meego.com/listinfo/meego-dev
Re: [MeeGo-dev] MeeGo on DevKit8000
On Tue, 2010-07-13 at 14:33 +0530, Amit Pundir wrote: On Tue, Jul 13, 2010 at 9:19 AM, vijay singh testmrs@gmail.com wrote: On Mon, 2010-07-12 at 17:05 +0300, Ameya Palande wrote: Hi Vijay, On Mon, 2010-07-12 at 09:05 +0200, ext vijay singh wrote: I have tried image from below location for DevKit8000: //http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch#Make_X_start but i couldn't able to boot kernel. Can you post the kernel output from serial console and the .config file that you used for building this kernel? I have used kernel image from below location : //http://wiki.meego.com/ARM/Meego_on_the_Beagle Check for section Steps to modify an N900 image for BeagleBoard Hi, Shouldn't you be running devkit8000 kernel instead? Check the following thread to get the devkit8000 kernel and uboot source links: http://groups.google.com/group/beagleboard/browse_thread/thread/3e02302066a6c003?pli=1 regards, Amit Pundir Serial console O/P : *** Texas Instruments X-Loader 1.41 Starting OS Bootloader... U-Boot 1.3.3-svn333 (Sep 10 2009 - 16:49:01) OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz OMAP3 DevKit8000 Board + LPDDR/NAND DRAM: 128 MB NAND: 128 MiB In: serial Out: serial Err: serial Hit any key to stop autoboot: 0 OMAP3 DevKit8000 # setenv bootargs 'console=ttyS2,115200n8 root=/dev/mmcblk0p3 rootdelay=1' OMAP3 DevKit8000 # mmcinit OMAP3 DevKit8000 # fatload mmc 0 8200 uImage reading uImage 1986880 bytes read OMAP3 DevKit8000 # bootm 8200 ## Booting kernel from Legacy Image at 8200 ... Image Name: Linux-2.6.34-beagle Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1986816 Bytes = 1.9 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. *** After that nothing will happen. Please let me know boot arg are correct ?? or Do i have to use other configuration. If you have working configuration then please send it to me. Regards, vij Cheers, Ameya. Hi, I have tried with one of Beagle board kernel (Working previously) it's boot up but still have problem with getting X. I have attached boot log. In summary i am getting below error (If i will run TWM manager): *** /usr/bin/xsetroot: unable to open display '' /usr/bin/twm: unable to open display /usr/bin/xterm Xt error: Can't open display: /usr/bin/xterm: DISPLAY is not set *** Please check. Regards, Vij ___ MeeGo-dev mailing list MeeGo-dev@meego.com http://lists.meego.com/listinfo/meego-dev ___ MeeGo-dev mailing list MeeGo-dev@meego.com http://lists.meego.com/listinfo/meego-dev ___ MeeGo-dev mailing list MeeGo-dev@meego.com http://lists.meego.com/listinfo/meego-dev MeeGo_On_DevKit8000_Log.rtf Description: RTF file ___ MeeGo-dev mailing list MeeGo-dev@meego.com http://lists.meego.com/listinfo/meego-dev
Re: [MeeGo-dev] MeeGo on DevKit8000
On Tue, 2010-07-13 at 16:39 +0530, Amit Pundir wrote: On Tue, Jul 13, 2010 at 4:25 PM, vijay singh testmrs@gmail.com wrote: On Tue, 2010-07-13 at 14:33 +0530, Amit Pundir wrote: On Tue, Jul 13, 2010 at 9:19 AM, vijay singh testmrs@gmail.com wrote: On Mon, 2010-07-12 at 17:05 +0300, Ameya Palande wrote: Hi Vijay, On Mon, 2010-07-12 at 09:05 +0200, ext vijay singh wrote: I have tried image from below location for DevKit8000: //http://wiki.meego.com/ARM/Meego_on_Beagleboard_from_scratch#Make_X_start but i couldn't able to boot kernel. Can you post the kernel output from serial console and the .config file that you used for building this kernel? I have used kernel image from below location : //http://wiki.meego.com/ARM/Meego_on_the_Beagle Check for section Steps to modify an N900 image for BeagleBoard Hi, Shouldn't you be running devkit8000 kernel instead? Check the following thread to get the devkit8000 kernel and uboot source links: http://groups.google.com/group/beagleboard/browse_thread/thread/3e02302066a6c003?pli=1 regards, Amit Pundir Serial console O/P : *** Texas Instruments X-Loader 1.41 Starting OS Bootloader... U-Boot 1.3.3-svn333 (Sep 10 2009 - 16:49:01) OMAP3530-GP rev 2, CPU-OPP2 L3-165MHz OMAP3 DevKit8000 Board + LPDDR/NAND DRAM: 128 MB NAND: 128 MiB In: serial Out: serial Err: serial Hit any key to stop autoboot: 0 OMAP3 DevKit8000 # setenv bootargs 'console=ttyS2,115200n8 root=/dev/mmcblk0p3 rootdelay=1' OMAP3 DevKit8000 # mmcinit OMAP3 DevKit8000 # fatload mmc 0 8200 uImage reading uImage 1986880 bytes read OMAP3 DevKit8000 # bootm 8200 ## Booting kernel from Legacy Image at 8200 ... Image Name: Linux-2.6.34-beagle Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 1986816 Bytes = 1.9 MB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. *** After that nothing will happen. Please let me know boot arg are correct ?? or Do i have to use other configuration. If you have working configuration then please send it to me. Regards, vij Cheers, Ameya. Hi, I have tried with one of Beagle board kernel (Working previously) it's boot up but still have problem with getting X. I have attached boot log. In summary i am getting below error (If i will run TWM manager): *** /usr/bin/xsetroot: unable to open display '' /usr/bin/twm: unable to open display /usr/bin/xterm Xt error: Can't open display: /usr/bin/xterm: DISPLAY is not set *** try following command and see if it works: $ export DISPLAY=:0 regards, Amit Pundir Please check. Regards, Vij I have already set the same but still error mentioned above visible. ___ MeeGo-dev mailing list MeeGo-dev@meego.com http://lists.meego.com/listinfo/meego-dev ___ MeeGo-dev mailing list MeeGo-dev@meego.com http://lists.meego.com/listinfo/meego-dev
Re: [MeeGo-dev] MeeGo on DevKit8000
Hello, Can anyone give me some update. Beagle board have TI-OMAP3530. Regards, vij On Fri, 2010-07-09 at 10:37 +0530, vijay singh wrote: Hello, I want to run MeeGo on DevKit8000. Details about board av...@http://www.embedinfo.com/english/product/devkit8000.asp Please let me know how to start ?? if any one already run Meego on DevKit8000 then please send me the details. My host machine is ubuntu 10.04. Regards, vij ___ MeeGo-dev mailing list MeeGo-dev@meego.com http://lists.meego.com/listinfo/meego-dev
[MeeGo-dev] MeeGo on DevKit8000
Hello, I want to run MeeGo on DevKit8000. Details about board av...@http://www.embedinfo.com/english/product/devkit8000.asp Please let me know how to start ?? if any one already run Meego on DevKit8000 then please send me the details. My host machine is ubuntu 10.04. Regards, vij ___ MeeGo-dev mailing list MeeGo-dev@meego.com http://lists.meego.com/listinfo/meego-dev
