Re: [MBZ] Broken cruise control handle
Rusty - how much for a new CC switch (1983 123 turbodiesel) ? On 10/20/05, Marshall Booth <[EMAIL PROTECTED]> wrote: > > Anthony Galioto wrote: > > My cruise control handle/lever came cleanly out of the switch. I tried > > putting it back with JB Weld. That held for about 10 pulls on the lever > then > > came out with the JB attached. It came cleanly off the lever and did not > > remain in the switch. It als came off the lever with my nail. Is there > > anything that can hold the two parts together and withstand the movement > of > > the lever? Does anyone have any experience with this problem? > > Thanks --Anthony > > I know of NO reliable repair except to replace the switch. Not sure > about 123s, but there are three different switches used on 201s (and > they were NOT interchangeable). > > Marshall > -- > Marshall Booth Ph.D. > Ass't Prof. (ret.) > Univ of Pittsburgh School of Medicine > Department of Pharmacology 1300 BST > Pittsburgh PA 15261 USA > [EMAIL PROTECTED] > > ___ > For new parts see official list sponsor: http://www.buymbparts.com/ > For used parts email [EMAIL PROTECTED] > > To Unsubscribe or change delivery options go to: > http://striplin.net/mailman/listinfo/mercedes_striplin.net >
Re: [MBZ] Broken cruise control handle
Anthony Galioto wrote: My cruise control handle/lever came cleanly out of the switch. I tried putting it back with JB Weld. That held for about 10 pulls on the lever then came out with the JB attached. It came cleanly off the lever and did not remain in the switch. It als came off the lever with my nail. Is there anything that can hold the two parts together and withstand the movement of the lever? Does anyone have any experience with this problem? Thanks --Anthony I know of NO reliable repair except to replace the switch. Not sure about 123s, but there are three different switches used on 201s (and they were NOT interchangeable). Marshall -- Marshall Booth Ph.D. Ass't Prof. (ret.) Univ of Pittsburgh School of Medicine Department of Pharmacology 1300 BST Pittsburgh PA 15261 USA [EMAIL PROTECTED]
Re: [MBZ] Broken cruise control handle
I had the same problem recently with my 190D. I finally had to replace the whole switch--couldn't figure out a way to repair it. Kind of a pain in the 190, since you have to remove the steering wheel, with the airbag in it. Ron Dwelle On Oct 20, 2005, at 7:21 PM, Anthony Galioto wrote: My cruise control handle/lever came cleanly out of the switch. I tried putting it back with JB Weld. That held for about 10 pulls on the lever then came out with the JB attached. It came cleanly off the lever and did not remain in the switch. It als came off the lever with my nail. Is there anything that can hold the two parts together and withstand the movement of the lever? Does anyone have any experience with this problem? Thanks --Anthony 1983 240D 63300 ___
[MBZ] Broken cruise control handle
My cruise control handle/lever came cleanly out of the switch. I tried putting it back with JB Weld. That held for about 10 pulls on the lever then came out with the JB attached. It came cleanly off the lever and did not remain in the switch. It als came off the lever with my nail. Is there anything that can hold the two parts together and withstand the movement of the lever? Does anyone have any experience with this problem? Thanks --Anthony 1983 240D 63300
