Re: [MBZ] Injector nozzles?

2021-08-03 Thread Clay via Mercedes
Sounds like it is normal for OM606 to me.  Operating very well after 20 years 
at that.  Techron or SeaFoam in the tank, as well as the really fun spray 
seafoam for hosing down the intake.  Gets the backside of the intake valves 
cleaner.

clay 

I have no pronouns please do not refer to me.



> On Aug 3, 2021, at 7:20 PM, Kaleb Striplin via Mercedes 
> mailto:mercedes@okiebenz.com>> wrote:
> 
> It will not really roll coal but can see it for sure for a second or two 
> under full throttle.  Most of my driving is highway of a couple of hours at a 
> time, my city driving is usually 45 minutes one way.
> 
> On 8/3/2021 10:11 PM, Clay via Mercedes wrote:


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Injector nozzles?

2021-08-03 Thread Kaleb Striplin via Mercedes
It will not really roll coal but can see it for sure for a second or two 
under full throttle.  Most of my driving is highway of a couple of hours 
at a time, my city driving is usually 45 minutes one way.


On 8/3/2021 10:11 PM, Clay via Mercedes wrote:

The NA E300D would roll coal at full throttle stomp.  Not continuously, but for 
a few moments.  Is this on a hot engine?  I was able to get deep black a few 
hours in on long drives.  Best solution was B5 to help dissolve the gunk built 
up and Italian tunes to blast carbon out.  Cleaned up nozzles and got better 
breathing/power.  Blazing down the freeways at 80 all day got me close to 
37mpg.  City had a hard time getting better mileage than you are seeing.  
Thirties seem to be reserved for highway distances at speed.


---
clay

I turned my computer upside down and shook it, but the bookmark for what I'm 
looking for didn't fall out.





On Aug 2, 2021, at 7:27 PM, Kaleb Striplin via Mercedes  
wrote:

I guess I need to cut a hole in my hood also.

Mileage is also down, or so it seems.  I have hit 31-32 a couple of times but 
seems to be 28 most of the time.  Seems like it should be hitting 32 most of 
the time.

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Injector nozzles?

2021-08-03 Thread Clay via Mercedes
The NA E300D would roll coal at full throttle stomp.  Not continuously, but for 
a few moments.  Is this on a hot engine?  I was able to get deep black a few 
hours in on long drives.  Best solution was B5 to help dissolve the gunk built 
up and Italian tunes to blast carbon out.  Cleaned up nozzles and got better 
breathing/power.  Blazing down the freeways at 80 all day got me close to 
37mpg.  City had a hard time getting better mileage than you are seeing.  
Thirties seem to be reserved for highway distances at speed.


---
clay

I turned my computer upside down and shook it, but the bookmark for what I'm 
looking for didn't fall out.




> On Aug 2, 2021, at 7:27 PM, Kaleb Striplin via Mercedes 
>  wrote:
> 
> I guess I need to cut a hole in my hood also.
> 
> Mileage is also down, or so it seems.  I have hit 31-32 a couple of times but 
> seems to be 28 most of the time.  Seems like it should be hitting 32 most of 
> the time.

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Injector nozzles?

2021-08-03 Thread Kaleb Striplin via Mercedes
It appears bosios are no longer made and Firad is the new choice, or so I have 
read. 

Sent from my iPhone

> On Aug 3, 2021, at 7:15 AM, Max Dillon via Mercedes  
> wrote:
> 
> A few years ago, Bosio was preferred over Bosch.  May have changed since 
> then.  Mark Blevins in Columbia SC will test and balance them, do you have 
> his contact info?  I'd ask him, he's probably current.
> 
> Max Dillon
> Charleston SC
> 
> 
> Aug 2, 2021 11:27:41 PM Kaleb Striplin via Mercedes :
> 
>> I guess I need to cut a hole in my hood also.
>> 
>> Mileage is also down, or so it seems.  I have hit 31-32 a couple of times 
>> but seems to be 28 most of the time.  Seems like it should be hitting 32 
>> most of the time.
>> 
>>> On 8/2/2021 9:43 PM, Max Dillon via Mercedes wrote:
>>> You're complaining about rolling coal?  Flip to the Facebook folks...
>>> 
>>> Max Dillon
>>> Charleston SC
>>> 
>>> 
>>> Aug 2, 2021 10:14:18 PM Kaleb Striplin via Mercedes :
>>> 
 So I had posted before about my 99 606 seems to smoke faintly at idle and 
 black smoke at full throttle.  It really that grey/white diesel smoke at 
 idle.  I am wondering if the IP timing is off a bit and plan to check it.  
 At least that is what I thought when I was thinking it was black smoke at 
 idle.  I observed it again and its really the grey/white like I mentioned. 
  Anyway, I am thinking maybe it is time for new nozzles?  Thoughts?  If 
 nozzles, what are the go to brand these days?
 
 
 ___
 http://www.okiebenz.com
 
 To search list archives http://www.okiebenz.com/archive/
 
 To Unsubscribe or change delivery options go to:
 http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>>> ___
>>> http://www.okiebenz.com
>>> 
>>> To search list archives http://www.okiebenz.com/archive/
>>> 
>>> To Unsubscribe or change delivery options go to:
>>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>>> 
>> 
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
> 


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Injector nozzles?

2021-08-03 Thread Max Dillon via Mercedes
A few years ago, Bosio was preferred over Bosch.  May have changed since then.  
Mark Blevins in Columbia SC will test and balance them, do you have his contact 
info?  I'd ask him, he's probably current.

Max Dillon
Charleston SC


Aug 2, 2021 11:27:41 PM Kaleb Striplin via Mercedes :

> I guess I need to cut a hole in my hood also.
> 
> Mileage is also down, or so it seems.  I have hit 31-32 a couple of times but 
> seems to be 28 most of the time.  Seems like it should be hitting 32 most of 
> the time.
> 
> On 8/2/2021 9:43 PM, Max Dillon via Mercedes wrote:
>> You're complaining about rolling coal?  Flip to the Facebook folks...
>> 
>> Max Dillon
>> Charleston SC
>> 
>> 
>> Aug 2, 2021 10:14:18 PM Kaleb Striplin via Mercedes :
>> 
>>> So I had posted before about my 99 606 seems to smoke faintly at idle and 
>>> black smoke at full throttle.  It really that grey/white diesel smoke at 
>>> idle.  I am wondering if the IP timing is off a bit and plan to check it.  
>>> At least that is what I thought when I was thinking it was black smoke at 
>>> idle.  I observed it again and its really the grey/white like I mentioned.  
>>> Anyway, I am thinking maybe it is time for new nozzles?  Thoughts?  If 
>>> nozzles, what are the go to brand these days?
>>> 
>>> 
>>> ___
>>> http://www.okiebenz.com
>>> 
>>> To search list archives http://www.okiebenz.com/archive/
>>> 
>>> To Unsubscribe or change delivery options go to:
>>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> ___
>> http://www.okiebenz.com
>> 
>> To search list archives http://www.okiebenz.com/archive/
>> 
>> To Unsubscribe or change delivery options go to:
>> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com
>> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Injector nozzles?

2021-08-02 Thread Kaleb Striplin via Mercedes

I guess I need to cut a hole in my hood also.

Mileage is also down, or so it seems.  I have hit 31-32 a couple of 
times but seems to be 28 most of the time.  Seems like it should be 
hitting 32 most of the time.


On 8/2/2021 9:43 PM, Max Dillon via Mercedes wrote:

You're complaining about rolling coal?  Flip to the Facebook folks...

Max Dillon
Charleston SC


Aug 2, 2021 10:14:18 PM Kaleb Striplin via Mercedes :


So I had posted before about my 99 606 seems to smoke faintly at idle and black 
smoke at full throttle.  It really that grey/white diesel smoke at idle.  I am 
wondering if the IP timing is off a bit and plan to check it.  At least that is 
what I thought when I was thinking it was black smoke at idle.  I observed it 
again and its really the grey/white like I mentioned.  Anyway, I am thinking 
maybe it is time for new nozzles?  Thoughts?  If nozzles, what are the go to 
brand these days?


___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



Re: [MBZ] Injector nozzles?

2021-08-02 Thread Max Dillon via Mercedes
You're complaining about rolling coal?  Flip to the Facebook folks...

Max Dillon
Charleston SC


Aug 2, 2021 10:14:18 PM Kaleb Striplin via Mercedes :

> So I had posted before about my 99 606 seems to smoke faintly at idle and 
> black smoke at full throttle.  It really that grey/white diesel smoke at 
> idle.  I am wondering if the IP timing is off a bit and plan to check it.  At 
> least that is what I thought when I was thinking it was black smoke at idle.  
> I observed it again and its really the grey/white like I mentioned.  Anyway, 
> I am thinking maybe it is time for new nozzles?  Thoughts?  If nozzles, what 
> are the go to brand these days?
> 
> 
> ___
> http://www.okiebenz.com
> 
> To search list archives http://www.okiebenz.com/archive/
> 
> To Unsubscribe or change delivery options go to:
> http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com

___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] Injector nozzles?

2021-08-02 Thread Kaleb Striplin via Mercedes
So I had posted before about my 99 606 seems to smoke faintly at idle 
and black smoke at full throttle.  It really that grey/white diesel 
smoke at idle.  I am wondering if the IP timing is off a bit and plan to 
check it.  At least that is what I thought when I was thinking it was 
black smoke at idle.  I observed it again and its really the grey/white 
like I mentioned.  Anyway, I am thinking maybe it is time for new 
nozzles?  Thoughts?  If nozzles, what are the go to brand these days?



___
http://www.okiebenz.com

To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://mail.okiebenz.com/mailman/listinfo/mercedes_okiebenz.com



[MBZ] Injector Nozzles

2010-01-01 Thread Peter Merle
HAve any of you used Monark injector nozzles ? I wonder ho wthey
compaed to the Indian made Bosch's .
Peter

___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com


Re: [MBZ] Injector Nozzles

2010-01-01 Thread Gary Hurst
that's actually a damn good question i'd also like to know the answer to.
my gut feeling is that the indian bosch would be better, but i just don't
know

On Fri, Jan 1, 2010 at 7:18 AM, Peter Merle merle.pe...@gmail.com wrote:

 HAve any of you used Monark injector nozzles ? I wonder ho wthey
 compaed to the Indian made Bosch's .
 Peter

 ___
 http://www.okiebenz.com
 For new and used parts go to www.okiebenz.com
 To search list archives http://www.okiebenz.com/archive/

 To Unsubscribe or change delivery options go to:
 http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com




-- 
save 5% on our already low, low prices.  use coupon code DAVE at checkout.
 www. BuyEUROparts.com
___
http://www.okiebenz.com
For new and used parts go to www.okiebenz.com
To search list archives http://www.okiebenz.com/archive/

To Unsubscribe or change delivery options go to:
http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com