Re: error compiling kernel when updating openbsd 4.5 through cvs (SOLVED)
--- On Mon, 10/12/09, Robert Gilaard rgila...@yahoo.com wrote:
From: Robert Gilaard rgila...@yahoo.com
Subject: Re: error compiling kernel when updating openbsd 4.5 through cvs
To: rob...@openbsd.pap.st
Cc: misc@openbsd.org
Date: Monday, October 12, 2009, 3:01 PM
--- On Mon, 10/12/09, Robert rob...@openbsd.pap.st wrote:
From: Robert rob...@openbsd.pap.st
Subject: Re: error compiling
kernel when updating openbsd 4.5 through cvs
To: Robert Gilaard rgila...@yahoo.com
Date: Monday, October 12, 2009, 12:09 AM
On Sun, 11 Oct 2009 14:30:30 -0700 (PDT)
Robert Gilaard rgila...@yahoo.com wrote:
Hi OpenBSD people,
I have this VIA c3 epia system with 512mb RAM and a 80GB HD where I've
installed Openbsd 4.5 (got the install sets from a ftp server).
uname -a gives:
OpenBSD via-epia.lokaal 4.5 GENERIC#1749 i386
Then I wanted to update this machine because
http://www.openbsd.org/errata45.html said there were a few patches.
I
decided to use cvsup and after I fetched the sources I did:
...
# cd /usr/src/sys/arch/i386/conf/
# config GENERIC
# cd ../compile/GENERIC
# make clean make depend make make installThis last command
stopped with the following error:
FREEBSD -DCOMPAT_BSDOS -DCOMPAT_AOUT -DPROCFS -DPCIVERBOSE
-DEISAVERBOSE -DUSBVERBOSE -DWSDISPLAY_COMPAT_USL
-DWSDISPLAY_COMPAT_RAWKBD -DWSDISPLAY_DEFAULTSCREENS=6
-DWSDISPLAY_COMPAT_PCVT -DONEWIREVERBOSE -D_KERNEL -Di386
-c ../../../../dev/pci/eap.c cc -Werror -Wall -Wstrict-prototypes
-Wmissing-prototypes -Wno-uninitialized -Wno-format -Wno-main
-Wstack-larger-than-2047 -fno-builtin-printf -fno-builtin-log -O2
-pipe -nostdinc -I. -I../../../.. -I../../../../arch -DDDB
-DDIAGNOSTIC -DKTRACE -DACCOUNTING -DKMEMSTATS -DPTRACE
-DCRYPTO
-DSYSVMSG -DSYSVSEM -DSYSVSHM -DUVM_SWAP_ENCRYPT -DCOMPAT_43
-DCOMPAT_O43 -DLKM -DFFS -DFFS2 -DFFS_SOFTUPDATES -DUFS_DIRHASH
-DQUOTA -DEXT2FS -DMFS -DXFS -DTCP_SACK -DTCP_ECN -DTCP_SIGNATURE
-DNFSCLIENT -DNFSSERVER -DCD9660 -DUDF -DMSDOSFS -DFIFO -DINET -DALTQ
-DINET6 -DIPSEC -DPPP_BSDCOMP -DPPP_DEFLATE -DMROUTING -DBOOT_CONFIG
-DUSER_PCICONF -DKVM86 -DUSER_LDT -DAPERTURE -DCOMPAT_SVR4
-DCOMPAT_IBCS2 -DCOMPAT_LINUX -DCOMPAT_FREEBSD -DCOMPAT_BSDOS
-DCOMPAT_AOUT -DPROCFS -DPCIVERBOSE -DEISAVERBOSE -DUSBVERBOSE
-DWSDISPLAY_COMPAT_USL -DWSDISPLAY_COMPAT_RAWKBD
-DWSDISPLAY_DEFAULTSCREENS=6 -DWSDISPLAY_COMPAT_PCVT
-DONEWIREVERBOSE -D_KERNEL -Di386 -c ../../../../dev/pci/eso.c
{standard input}: Assembler messages: {standard input}:2722: Error:
bad register name `%dbp' *** Error code 1
Stop in
/usr/src/sys/arch/i386/compile/GENERIC (line 92 of
/usr/share/mk/sys.mk)
Is this a problem with my hardware or something else?
Hope somebody can help me with it.
Brgds
Robert
Just to make sure that it's not somthing simple...
You used cvsup to get a full local cvs tree.
After that you check(ed)out/updated your source in /usr/src from that?
- Robert
Yep,
I used the following cvs-src-file:
# Defaults that apply to all the collections
*default release=cvs
*default delete use-rel-suffix
*default umask=002
*default host=cvsup.no.openbsd.org *default base=/usr
*default prefix=/usr
*default tag=OPENBSD_4_5
# If your network link is a T1 or faster, comment out the following line.
# *default compress
#OpenBSD-ports
#OpenBSD-all
OpenBSD-src
#OpenBSD-www
#OpenBSD-x11
#OpenBSD-xenocara
Then I did this:
cvsup -g -L 2 cvsup-file-src
My dmes shows:
OpenBSD 4.5 (GENERIC) #1749: Sat Feb 28 14:51:18 MST 2009
dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: VIA Samuel 2 (CentaurHauls 686-class) 797 MHz
cpu0: FPU,DE,TSC,MSR,MTRR,PGE,MMX
real mem = 502820864 (479MB)
avail mem = 477847552 (455MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/19/04, BIOS32 rev. 0 @ 0xfdad0,
SMBIOS rev. 2.3 @ 0xf0630 (24 entries)
bios0: vendor American Megatrends Inc. version Version 07.00T date 04/02/01
bios0: ECS M789CG
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xf/0x1
pcibios0:
PCI IRQ Routing Table rev 1.0 @ 0xf79a0/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:17:0 (VIA VT8235 ISA rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc/0x7e00 0xc8000/0x3000!
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 VIA VT8623 PCI rev 0x00
viaagp0 at pchb0: v2
agp0 at viaagp0: aperture at 0xe000, size 0x1000
ppb0 at pci0 dev 1 function 0 VIA VT8633 AGP rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 VIA CLE266 rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 16 function 0 VIA VT83C572 USB rev 0x80: irq 11
uhci1 at pci0 dev 16 function 1 VIA VT83C572 USB rev 0x80: irq 5
uhci2 at pci0 dev 16 function 2 VIA VT83C572 USB rev 0x80: irq 5
ehci0 at pci0 dev 16
Re: Linker errors I don't understand
Philip Guenther: This happens at least on amd64 and sparc64, but not on i386: --- cc -std=gnu99 -O2 -pipe -Wall -W -o .libs/tiffmedian tiffmedian.o -L/usr/local/lib -L../libtiff/.libs -ltiff ../port/.libs/libport.a -ljpeg -lz -lm -Wl,-rpath,/usr/local/lib /usr/bin/ld: ../libtiff/.libs/libtiff.so.38.2: invalid string offset 3503345872 = 4739 for section `.dynstr' Offset beyond end of section? Looks like libtiff.so.38.2 is corrupt to me. I would remove all its objects and rebuild it and see if the problem persists, The problem is reproducible on two archs. I don't see where corruption could occur. ... It doesn't happen on alpha. ... It doesn't happen with jpeg6. Interesting. This popped up on i386: --- cc -O2 -pipe -g -o .libs/epeg epeg_main.o -L/usr/local/lib -L../../src/lib/.libs -lepeg -ljpeg -Wl,-rpath,/usr/local/lib ../../src/lib/.libs/libepeg.so.0.0: undefined reference to `no symbol' Weird: if I'm reading the ld source correctly, the code to look up a symbol by name was passed a NULL pointer. Again, a corrupt library seems likely. This was the only weird fallout from a full package bulk build with a jpeg update I'm working on. Rebuilding epeg just ended with the same error. I have now removed all packages from that machine, rebuilt and reinstalled libjpeg from scratch, and now epeg builds. Very strange. -- Christian naddy Weisgerber na...@uugrn.org
Je sur comptable a la banque BCB je vais virée $6.million a la etranger
You're invited to Je sur comptable a la banque BCB je vais virie $6.million a la etranger. By your host Ashraf Cotu: Date: Wednesday October 14, 2009 Time: 9:00 am - 10:00 am (GMT +00:00) Location: Cher Ami Salut, Je suis MR, Ashraf Cotu comptable a la BANQUE COMERCIALE DU BURKINA (BCB), je vais virie $6.million (usd) a la etranger si vous pour vais me aide et ci ga vous intersse je vous enverrons tous les ditails sur la fagon dont on va fait le demache et igalement noter que vous aurez 30% du montant indiqui .si vous jtes d'accord pour m'aider ` exicuter cette transaction. reponne moi rapidement et s.v.p ces un propossition confidentielle merci Guests: * micko...@hotmail.com * micko...@hotmail.com * mickou...@msn.com * micoca-...@hotmail.com * micom...@yahoo.fr * micpopi...@hotmail.com * microsoftgh...@hotmail.com * micu...@hotmail.com * micwal...@hotmail.fr * midade_que...@yahoo.ca * middlesex1...@yahoo.com * midwifeba...@yahoo.ca * miejav...@yahoo.fr * mielproducti...@hotmail.fr * mieminaju...@hotmail.fr * mignot...@hotmail.com * miiss-meii...@hotmail.fr * miiss-adel...@hotmail.fr * miiss_aurore...@hotmail.fr * mik_sk8_b...@hotmail.com * mikaye...@hotmail.com * mikdima...@hotmail.com * mike.hodg...@yahoo.ca * mike.hodg...@yahoo.cacambay * mike_arnol...@hotmail.com * mike_box...@hotmail.com * mike_busut...@hotmail.com * mike_numbe...@hotmail.com * mikebas...@hotmail.com * mikebasti...@yahoo.fr * mikebure...@hotmail.com * miked...@hotmail.com * mikehughe...@yahoo.ca * mikemcsor...@hotmail.com * mikepayne1...@yahoo.ca * mikew...@hotmail.com * mikidutz...@yahoo.com * mikine...@hotmail.com * mikol...@hotmail.com * mileona...@hotmail.com * milher...@yahoo.ca * milnerob...@yahoo.ca * milnewst...@yahoo.ca * milonga...@yahoo.ca * milou...@hotmail.com * milous...@hotmail.com * milpi...@yahoo.ca * milto...@hotmail.com * mimi-1...@hotmail.com * mimi38cha...@hotmail.fr * mimi_ma...@hotmail.fr * mimine...@hotmail.com * mimiry...@hotmail.com * mimoub...@yahoo.fr * minet_m...@hotmail.com * minhhoanguye...@yahoo.fr * minis...@transportation.gov.lb * minou...@yahoo.fr * miorita_...@yahoo.fr * mirak0...@yahoo.fr * mira...@yahoo.fr * miramichidentalcli...@yahoo.ca * mireillepda...@yahoo.ca * miriame...@yahoo.fr * misc@openbsd.org * misl...@hotmail.com * miss-barbie-gir...@hotmail.com * miss_1...@hotmail.com * miss_jordanna_...@yahoo.ca * miss_jordanna_...@yahoo.com * miss_t...@hotmail.fr * missalex-lamine...@hotmail.fr * misschav...@yahoo.com * missdauphin...@live.fr * missionfat...@yahoo.ca * missionurba...@yahoo.ca * missmyad...@hotmail.fr * missoun_fat...@yahoo.fr * mister.alexan...@hotmail.fr * mister_blackc...@hotmail.fr invitation_add_to_your_yahoo_calendar: http://ca.calendar.yahoo.com/?v=60ST=20091014T09%2BTITLE=Je+sur+comptable+a+la+banque+BCB+je+vais+vir%c3%a9e+$6.million+a+la+etrangerDUR=0100VIEW=din_loc=Cher+Ami+Salut,+Je+suis+MR,+Ashraf+Cotu+comptable+a+la+BANQUE+COMERCIALE+DU+BURKINA+(BCB),+je+vais+vir%c3%a9e+$6.million+(usd)+a+la+etranger+si+vous+pour+vais+me+aide+et+ci+%c3%a7a+vous+intersse+je+vous+enverrons+tous+les+d%c3%a9tails+sur+la+fa%c3%a7on+dont+on+va+fait+le+demache+et+%c3%a9galement+noter+que+vous+aurez+30%25+du+montant+indiqu%c3%a9+.si+vous+%c3%aates+d%27accord+pour+m%27aider+%c3%a0+ex%c3%a9cuter+cette+transaction.+reponne+moi+rapidement+et+s.v.p+ces+un+propossition+confidentielle+merciTYPE=10 Copyright ) 2009 All Rights Reserved www.yahoo.ca Privacy Policy: http://privacy.yahoo.com/privacy/ca Terms of Service: http://ca.docs.yahoo.com/info/terms/
Re: New functionnality for authpf
I would be hard to ask my boss to hire a developer, since with my script the solution is working. I'll think to OpenBSD people before discarding our old hardware, anyway. My script loads the rules once, and modifies the table within the rule. When the user disconnects, its IP is removed from the table, and its connections are killed with pfctl -k. By the way, your idea of include statement is very good, and doesn't need any further coding of authpf. I'm going to test this right now. Thank you for the precious time you spent on my problem ! -- Cordialement, Pierre BARDOU -Message d'origine- De : Vadim Zhukov [mailto:persg...@gmail.com] EnvoyC) : mardi 13 octobre 2009 18:09 C : BARDOU Pierre Cc : misc@openbsd.org Objet : Re: New functionnality for authpf On 13 October 2009 P3. 18:53:07 BARDOU Pierre wrote: Hello, Id need a new functionnality in authpf It would be nice to do group based rules instead of user based rules. I made this using a script used as shell for the user, which lists the groups of the user, and add them to a table named like the group using pfctl and sudo. I can give it to you if you are interested. But I think it would be better to include this in authPF, and by the way it doesnt seems too difficult. Unfortunately, I dont know how to make this in C. Someone interested in doing this ? Ignoring the fact that it's better for you to prepare money (or some equivalent) to hier someone to do that work. You need it, then either you implement it, or pay for it. For example, you could donate some hardware OpenBSD need - see the www.openbsd.org/want.html . Now, for the request itself, you should clarify exact behavior you want: - Should the rules loaded only once, or every time user logs in? (The real fun part here is detach policy) - Maybe it's simplier to have /etc/authpf/groups/$GROUP/ directory with authpf.rules in it, and make /etc/authpf/users/$USER/authpf.rules be a soft link or contain include statement? The latter allows you very, very much flexibility. - Maybe more, I do not want to spend more time that I better have spent for polishing my own patches. -- Best wishes, Vadim Zhukov A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing in e-mail? [demime 1.01d removed an attachment of type application/x-pkcs7-signature which had a name of smime.p7s]
Re: New functionnality for authpf
BARDOU Pierre wrote: My script loads the rules once, and modifies the table within the rule. When the user disconnects, its IP is removed from the table, and its connections are killed with pfctl -k. boxA ssh remote-computer boxA ssh remote-computer (again) remote-computer exit see both ssh's fail. Probably what this comment was about: (The real fun part here is detach policy)
Re: Linker errors I don't understand
cc -std=gnu99 -O2 -pipe -Wall -W -o .libs/tiffmedian tiffmedian.o -L/usr/local/lib -L../libtiff/.libs -ltiff ../port/.libs/libport.a -ljpeg -lz -lm -Wl,-rpath,/usr/local/lib /usr/bin/ld: ../libtiff/.libs/libtiff.so.38.2: invalid string offset 3503345872 = 4739 for section `.dynstr' These just went away after I disabled symbol versioning in libjpeg. I think symbol versioning exposes bugs in our binutils. -- Christian naddy Weisgerber na...@uugrn.org
Routing firewall generated packets
Hi, I have a branch office Firewall that also acts as a smtp relay for the internal network, the system has 3 Internet connections: 1 - DHCP (default gateway) 2 - Fixed IP ($embratel_if) 3 - Fixed IP 4 - LAN The default gateway is the DHCP interface. I can route LAN traffic to any of the Internet Links as desired, that is ok. My problem happens when I try to route the smtp traffic from the Firewall itself trough other interface than the default gateway. I've configured the following rules: --- nat on $embratel_if proto tcp to port smtp - ($embratel_if) ... ... pass out on $ext_if route-to ($embratel_if $embratel_gw) proto tcp to port smtp --- The route-to rule routes the packets as expected, but the outgoing packets doesn't have the source IP changed. It goes out by the right interface but with the wrong ip address (the IP of the default gateway). How can I get this setup working? Thanks in advance, Fabio Almeida
Re: ZTE-MF626 USB Modem
Sergio Andris Gsmez del Real escreveu: Hi again. Sometimes I get the following: OpenBSD 4.5 (GENERIC.MP) #2133: Sat Feb 28 15:02:16 MST 2009 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 2143023104 (2043MB) avail mem = 2069721088 (1973MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xf7250 (44 entries) bios0: vendor Dell Inc. version A10 date 07/17/2009 bios0: Dell Inc. Inspiron 1545 acpi0 at bios0: rev 2 acpi0: tables DSDT FACP HPET APIC MCFG SLIC SSDT acpi0: wakeup devices PCI0(S5) PCIE(S4) USB1(S0) USB2(S0) USB3(S0) USB4(S0) USB5(S0) USB6(S0) EHC2(S0) EHCI(S0) AZAL(S3) RP01(S3) RP02(S3) RP03(S3) RP04(S3) RP05(S3) RP06(S3) LID_(S3) PBTN(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.34 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR,NXE,LONG cpu0: 3MB 64b/line 8-way L2 cache cpu0: apic clock running at 265MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.00 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,CX16,xTPR,NXE,LONG cpu1: 3MB 64b/line 8-way L2 cache ioapic0 at mainbus0 apid 2 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 acpiprt0 at acpi0: bus 3 (PCIE) acpiprt1 at acpi0: bus 1 (AGP_) acpiprt2 at acpi0: bus 11 (RP01) acpiprt3 at acpi0: bus 12 (RP02) acpiprt4 at acpi0: bus 9 (RP03) acpiprt5 at acpi0: bus -1 (RP04) acpiprt6 at acpi0: bus 13 (RP05) acpiprt7 at acpi0: bus -1 (RP06) acpiprt8 at acpi0: bus 0 (PCI0) acpicpu0 at acpi0: C3 acpicpu1 at acpi0: C3 acpitz0 at acpi0: critical temperature 105 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: PBTN acpibtn2 at acpi0: SBTN acpiac0 at acpi0: AC unit online acpibat0 at acpi0: BAT0 model DELL Y823G9 serial 591 type LION oem SMP acpivideo at acpi0 not configured acpivideo at acpi0 not configured acpivideo at acpi0 not configured cpu0: unknown Enhanced SpeedStep CPU, msr 0x0617092006000920 cpu0: using only highest and lowest power states cpu0: Enhanced SpeedStep 2400 MHz (1212 mV): speeds: 2400, 1600 MHz pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 Intel GM45 Host rev 0x07 ppb0 at pci0 dev 1 function 0 Intel GM45 PCIE rev 0x07: apic 2 int 16 (irq 0) pci1 at ppb0 bus 1 vga1 at pci1 dev 0 function 0 vendor ATI, unknown product 0x9552 rev 0x00 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) uhci0 at pci0 dev 26 function 0 Intel 82801I USB rev 0x03: apic 2 int 20 (irq 11) uhci1 at pci0 dev 26 function 1 Intel 82801I USB rev 0x03: apic 2 int 21 (irq 10) uhci2 at pci0 dev 26 function 2 Intel 82801I USB rev 0x03: apic 2 int 22 (irq 7) ehci0 at pci0 dev 26 function 7 Intel 82801I USB rev 0x03: apic 2 int 22 (irq 7) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 Intel 82801I HD Audio rev 0x03: apic 2 int 21 (irq 10) azalia0: codecs: IDT 92HD71B7 audio0 at azalia0 ppb1 at pci0 dev 28 function 0 Intel 82801I PCIE rev 0x03: apic 2 int 16 (irq 0) pci2 at ppb1 bus 11 ppb2 at pci0 dev 28 function 1 Intel 82801I PCIE rev 0x03: apic 2 int 17 (irq 0) pci3 at ppb2 bus 12 iwn0 at pci3 dev 0 function 0 Intel WiFi Link 5100AGN rev 0x00: apic 2 int 17 (irq 5), MIMO 1T2R, MoW, address 00:22:fb:9b:6f:62 ppb3 at pci0 dev 28 function 2 Intel 82801I PCIE rev 0x03: apic 2 int 18 (irq 0) pci4 at ppb3 bus 9 mskc0 at pci4 dev 0 function 0 Marvell Yukon 88E8040 rev 0x13, Yukon-2 FE+ (0x0): apic 2 int 18 (irq 10) msk0 at mskc0 port A: address 00:25:64:52:74:2d eephy0 at msk0 phy 0: 88E3016 10/100 PHY, rev. 0 ppb4 at pci0 dev 28 function 4 Intel 82801I PCIE rev 0x03: apic 2 int 16 (irq 0) pci5 at ppb4 bus 13 uhci3 at pci0 dev 29 function 0 Intel 82801I USB rev 0x03: apic 2 int 20 (irq 11) uhci4 at pci0 dev 29 function 1 Intel 82801I USB rev 0x03: apic 2 int 21 (irq 10) uhci5 at pci0 dev 29 function 2 Intel 82801I USB rev 0x03: apic 2 int 22 (irq 7) ehci1 at pci0 dev 29 function 7 Intel 82801I USB rev 0x03: apic 2 int 20 (irq 11) usb1 at ehci1: USB revision 2.0 uhub1 at usb1 Intel EHCI root hub rev 2.00/1.00 addr 1 ppb5 at pci0 dev 30 function 0 Intel 82801BAM Hub-to-PCI rev 0x93 pci6 at ppb5 bus 3 pcib0 at pci0 dev 31 function 0 vendor Intel, unknown product 0x2919 rev 0x03 ahci0 at pci0 dev 31 function 2 Intel 82801I AHCI rev 0x03: apic 2 int 18 (irq 10), AHCI 1.2 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: ATA, ST9160314AS, 0003 SCSI3 0/direct fixed sd0: 152627MB, 512 bytes/sec, 312581808 sec total cd0 at scsibus0 targ 1 lun 0: Optiarc, DVD+-RW
Re: Routing firewall generated packets
On 14 October 2009 c. 17:09:17 Mentesan wrote: Hi, I have a branch office Firewall that also acts as a smtp relay for the internal network, the system has 3 Internet connections: 1 - DHCP (default gateway) 2 - Fixed IP ($embratel_if) 3 - Fixed IP 4 - LAN The default gateway is the DHCP interface. I can route LAN traffic to any of the Internet Links as desired, that is ok. My problem happens when I try to route the smtp traffic from the Firewall itself trough other interface than the default gateway. I've configured the following rules: --- nat on $embratel_if proto tcp to port smtp - ($embratel_if) ... ... pass out on $ext_if route-to ($embratel_if $embratel_gw) proto tcp to port smtp --- The route-to rule routes the packets as expected, but the outgoing packets doesn't have the source IP changed. It goes out by the right interface but with the wrong ip address (the IP of the default gateway). How can I get this setup working? You didn't mentioned version of OpenBSD you're using - 4.5? If I understand you correctly, you should change your nat rule to: nat on $ext_if proto tcp to port smtp - ($embratel_if) Remember that pass ... route-to routes the packet on the $ext_if interface, and NAT occurs _before_ stepping through filter rules. So the packet is on the $ext_if interface there too. -- Best wishes, Vadim Zhukov A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing in e-mail?
Re: Routing firewall generated packets
Vadim Zhukov wrote: On 14 October 2009 c. 17:09:17 Mentesan wrote: Hi, I have a branch office Firewall that also acts as a smtp relay for the internal network, the system has 3 Internet connections: 1 - DHCP (default gateway) 2 - Fixed IP ($embratel_if) 3 - Fixed IP 4 - LAN The default gateway is the DHCP interface. I can route LAN traffic to any of the Internet Links as desired, that is ok. My problem happens when I try to route the smtp traffic from the Firewall itself trough other interface than the default gateway. I've configured the following rules: --- nat on $embratel_if proto tcp to port smtp - ($embratel_if) ... ... pass out on $ext_if route-to ($embratel_if $embratel_gw) proto tcp to port smtp --- The route-to rule routes the packets as expected, but the outgoing packets doesn't have the source IP changed. It goes out by the right interface but with the wrong ip address (the IP of the default gateway). How can I get this setup working? You didn't mentioned version of OpenBSD you're using - 4.5? If I understand you correctly, you should change your nat rule to: nat on $ext_if proto tcp to port smtp - ($embratel_if) Remember that pass ... route-to routes the packet on the $ext_if interface, and NAT occurs _before_ stepping through filter rules. So the packet is on the $ext_if interface there too. Thanks Vadim Zhukov, That did the trick, really thanks, now I can do much more routing tricks :) Best regards, Fabio Almeida
PF:. Possible to loadbalance connectiity of a LAN to different gateways per IP?
Hey guys, I know it is possible to route an interface to another gateway via route-to. But what If I want to loadbalance specific IPs to specific gateways in my box? Is this possible? Thank you --Andres
Re: Unable to set volume using mixerctl
On Wed, 14 Oct 2009, Jacob Meuser wrote: On Tue, Oct 13, 2009 at 09:04:17PM +0300, Antti Harri wrote: Hi, my cmedia sound card broke down, so I started using the integrated sound device (auvia(4)). I'm able to play music just fine however I cannot change the volume at all. Is the hardware just crappy or is the driver buggy? probably crappy hardware. at least, the mixer interface for ac97 codecs is all the same. I mean, all ac97 drivers use the same mixer code (dev/ic/ac97*). so, pretty unlikely the driver code is that buggy, unless everyone else is having problems and not reporting them. Too bad. :-/ Oh, I forgot to mention I'm also using aucat -l -v 115. -- Antti Harri
Re: ZTE-MF626 USB Modem
Thanks for the reply. Indeed, I use usb_modeswitch under Linux, it is, however, quite just for Linux, cause it reloads a certain kernel module. With GENERIC kernel, usb_modeswitch does not even recognize the device. However, compiling it (the kernel) without umass support, that is, the device being ugen, it does. Now, when I boot GENERIC with the modem plugged-in, then I get the microSD that is 'inside my modem' (not the cd-rom device) recognized, but no modem... If any idea would be wonderful, and sorry for my horrible english.
Atheros 5424 - Acer Aspire One
Hi. I'm having trouble connecting to a wireless network. My card is an Atheros AR5424! I do not see the networks, much less connect. The dmesg can speak for me anymore. regards -- MuriloBSD silc.dotbsd.org, dotbsd http://www.dotbsd.org/ OpenBSD 4.6-current (GENERIC.MP) #1: Sat Sep 26 20:32:56 UTC 2009 r...@microbio.dotbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP RTC BIOS diagnostic error 80clock_battery cpu0: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (GenuineIntel 686-class) 1.60 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR real mem = 2136002560 (2037MB) avail mem = 2061152256 (1965MB) RTC BIOS diagnostic error 80clock_battery mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 04/13/09, SMBIOS rev. 2.4 @ 0xe7f30 (31 entries) bios0: vendor Acer version V1.03 date 04/13/2009 bios0: Acer Aspire one acpi0 at bios0: rev 2 acpi0: tables DSDT FACP SSDT HPET APIC MCFG ASF! NSLI BOOT acpi0: wakeup devices UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) ECHI(S3) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) AZAL(S0) MODM(S0) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 133MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Atom(TM) CPU N270 @ 1.60GHz (GenuineIntel 686-class) 1.60 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,xTPR ioapic0 at mainbus0: apid 4 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 4 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 1 (EXP1) acpiprt2 at acpi0: bus 2 (EXP2) acpiprt3 at acpi0: bus 3 (EXP3) acpiprt4 at acpi0: bus -1 (EXP4) acpiec0 at acpi0 acpicpu0 at acpi0: C3, C2, C1, PSS acpicpu1 at acpi0: C3, C2, C1, PSS acpipwrres0 at acpi0: FN00 acpitz0 at acpi0: critical temperature 100 degC acpibtn0 at acpi0: PWRB acpibtn1 at acpi0: LID0 acpibtn2 at acpi0: SLPB acpibat0 at acpi0: BAT0 model GC86508SAT0 type Lion oem SANYO acpiac0 at acpi0: AC unit online acpivideo0 at acpi0: OVGA acpivout0 at acpivideo0: CRT1 acpivout1 at acpivideo0: DTV1 acpivout2 at acpivideo0: DFP1 acpivout3 at acpivideo0: LCD_ acpivout4 at acpivideo0: DTV2 acpivout5 at acpivideo0: DFP2 bios0: ROM list: 0xc/0xec00! 0xcf000/0x1000 cpu0: Enhanced SpeedStep 1597 MHz: speeds: 1600, 1333, 1066, 800 MHz pci0 at mainbus0 bus 0: configuration mode 1 (bios) pchb0 at pci0 dev 0 function 0 Intel 82945GME Host rev 0x03 vga1 at pci0 dev 2 function 0 Intel 82945GME Video rev 0x03 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0x8000, size 0x1000 inteldrm0 at vga1: apic 4 int 16 (irq 11) drm0 at inteldrm0 Intel 82945GM Video rev 0x03 at pci0 dev 2 function 1 not configured azalia0 at pci0 dev 27 function 0 Intel 82801GB HD Audio rev 0x02: apic 4 int 16 (irq 11) azalia0: codecs: Realtek ALC272 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 Intel 82801GB PCIE rev 0x02: apic 4 int 16 (irq 255) pci1 at ppb0 bus 1 ath0 at pci1 dev 0 function 0 Atheros AR5424 rev 0x01: apic 4 int 16 (irq 11) ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR5_ETSIC, address 00:24:2c:9a:1f:ff ppb1 at pci0 dev 28 function 1 Intel 82801GB PCIE rev 0x02: apic 4 int 17 (irq 255) pci2 at ppb1 bus 2 ppb2 at pci0 dev 28 function 2 Intel 82801GB PCIE rev 0x02: apic 4 int 18 (irq 255) pci3 at ppb2 bus 3 alc0 at pci3 dev 0 function 0 Attansic Technology L2C rev 0xc0: apic 4 int 18 (irq 11), address 00:23:5a:dd:9b:7c atphy0 at alc0 phy 0: F1 10/100/1000 PHY, rev. 11 uhci0 at pci0 dev 29 function 0 Intel 82801GB USB rev 0x02: apic 4 int 16 (irq 11) uhci1 at pci0 dev 29 function 1 Intel 82801GB USB rev 0x02: apic 4 int 17 (irq 11) uhci2 at pci0 dev 29 function 2 Intel 82801GB USB rev 0x02: apic 4 int 18 (irq 11) uhci3 at pci0 dev 29 function 3 Intel 82801GB USB rev 0x02: apic 4 int 19 (irq 11) ehci0 at pci0 dev 29 function 7 Intel 82801GB USB rev 0x02: apic 4 int 16 (irq 11) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 ppb3 at pci0 dev 30 function 0 Intel 82801BAM Hub-to-PCI rev 0xe2 pci4 at ppb3 bus 4 ichpcib0 at pci0 dev 31 function 0 Intel 82801GBM LPC rev 0x02: PM disabled pciide0 at pci0 dev 31 function 1 Intel 82801GB IDE rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility pciide0: channel 0 disabled (no drives) pciide0: channel 1 ignored (disabled) ahci0 at pci0 dev 31 function 2 Intel 82801GBM AHCI rev 0x02: apic 4 int 17 (irq 11), AHCI 1.1 ahci0: PHY offline on port 2 scsibus0 at ahci0: 32 targets sd0 at scsibus0 targ 0 lun 0: ATA, TOSHIBA MK1655GS, FG01 SCSI3 0/direct fixed sd0: 152627MB, 512 bytes/sec, 312581808 sec total ichiic0 at pci0 dev 31
rdist over non-default ssh port
Hi all, I just configured ssh to listen on port to prevent logfile-filling because of failed login attempts from botnets. Now rdist is not working anymore: $ rdist -f [distfile] pie...@lilium: updating host lilium ssh: connect to host lilium port 22: Connection refused pie...@lilium: LOCAL ERROR: No input from server. pie...@lilium: updating of pie...@lilium finished rdist runs this command: ssh host -l login_name rdistd -S is there a way to change it in: ssh host -p -l login_name rdistd -S Adios Pieter Verberne
Re: Atheros 5424 - Acer Aspire One
the AR5424 in Aspire Ones don't work. Sorry. On 2009 Oct 14 (Wed) at 16:26:02 -0200 (-0200), Murilo da Silva Ijanc wrote: :Hi. : :I'm having trouble connecting to a wireless network. My card is an Atheros :AR5424! I do not see the networks, much less connect. The dmesg can speak :for me anymore. : : :regards : : :-- :MuriloBSD :silc.dotbsd.org, dotbsd :http://www.dotbsd.org/ --- :ath0 at pci1 dev 0 function 0 Atheros AR5424 rev 0x01: apic 4 int 16 (irq 11) :ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR5_ETSIC, address 00:24:2c:9a:1f:ff --- You can tell from the 'rf 0.0' part. -- Silverman's Law: If Murphy's Law can go wrong, it will.
Re: rdist over non-default ssh port
On 14 October 2009 c. 22:46:07 Pieter Verberne wrote: Hi all, I just configured ssh to listen on port to prevent logfile-filling because of failed login attempts from botnets. Now rdist is not working anymore: $ rdist -f [distfile] pie...@lilium: updating host lilium ssh: connect to host lilium port 22: Connection refused pie...@lilium: LOCAL ERROR: No input from server. pie...@lilium: updating of pie...@lilium finished rdist runs this command: ssh host -l login_name rdistd -S is there a way to change it in: ssh host -p -l login_name rdistd -S You can play with your ~/.ssh/config file, see ssh_config(5). -- Best wishes, Vadim Zhukov A: Because it messes up the order in which people normally read text. Q: Why is top-posting such a bad thing? A: Top-posting. Q: What is the most annoying thing in e-mail?
Je sur comptable a la banque BCB je vais virée $6.million a la etranger
You are invited to Je sur comptable a la banque BCB je vais virie $6.million a la etranger. By your host Ashraf Cotu: Date: Wednesday October 14, 2009 Time: 6:00 pm - 7:00 pm (GMT +00:00) Location: Cher Ami Salut, Je suis MR, Ashraf Cotu comptable a la BANQUE COMERCIALE DU BURKINA (BCB), je vais virie $6.million (usd) a la etranger si vous pour vais me aide et ci ga vous intersse je vous enverrons tous les ditails sur la fagon dont on va fait le demache et igalement noter que vous aurez 30% du montant indiqui .si vous jtes d'accord pour m'aider ` exicuter cette transaction. reponne moi rapidement et s.v.p ces un propossition confidentielle merci Guests: * michelepeuc...@hotmail.fr * michelle_...@yahoo.ca * michellemichelle...@hotmail.com * michelperdr...@yahoo.fr * michga...@hotmail.com * michi...@hotmail.com * michldelhomm...@yahoo.fr * michou38...@hotmail.com * micka_fl...@hotmail.fr * mickael1...@hotmail.fr * midou_k...@hotmail.fr * miguelpouc...@hotmail.com * mika...@hotmail.com * mike_fon...@hotmail.com * mikenye...@yahoo.fr * mikhael...@hotmail.com * milady-b...@hotmail.fr * mila...@yahoo.com * milarep...@yahoo.fr * milazzob...@yahoo.fr * mildred_miral...@hotmail.com * millas.alexan...@orange.fr * mill...@alum.rpi.edu * milou...@hotmail.fr * mimi-...@hotmail.com * mimi_malika2...@yahoo.fr * mimicaram...@hotmail.fr * mimita1...@hotmail.fr * minati...@hotmail.fr * mindos-...@hotmail.fr * mini-geor...@hotmail.fr * minibrur...@hotmail.fr * minimo...@hotmail.fr * mi...@hotmail.com * minjust...@yahoo.fr * minou.immor...@hotmail.com * mira0...@hotmail.com * mirco.mil...@hotmail.com * mir...@yahoo.com * miroirsdefem...@yahoo.fr * misans...@hotmail.com * misc@openbsd.org * miss-amin...@hotmail.fr * miss-a...@hotmail.fr * miss_styl...@hotmail.fr * missdany...@hotmail.fr * missips...@yahoo.ca * missladysop...@hotmail.com * missre...@hotmail.fr * misstruc...@hotmail.fr * mister-rowl...@hotmail.fr * mister.k1fry-...@hotmail.fr * misterzayt...@hotmail.fr * misterzo...@hotmail.fr * mit...@hotmail.fr * mixu...@hotmail.com * mja...@spherion.ca * mjhoff...@hotmail.com * mjkae...@hotmail.com * mjleyd...@hotmail.fr * mkci...@hotmail.com * mklau...@yahoo.ca * mkrubenst...@alum.wustl.edu * m...@evhr.net * mk...@alum.bu.edu * mlaba...@hotmail.com * mlamarana_dia...@yahoo.fr * ml...@hotmail.com * mlc...@orange.fr * mlemo...@yahoo.fr * mlh1...@hotmail.com * mli...@yahoo.com * mliha-tou...@emi.ac.ma * ml...@emi.ac.ma * mllegdelacla...@hotmail.fr * mm...@hotmail.com * mmchaum...@yahoo.fr * mme.je...@hotmail.fr * mmun...@yahoo.com * mnabrou...@hotmail.com invitation_add_to_your_yahoo_calendar: http://calendar.yahoo.com/?v=60ST=20091014T18%2BTITLE=Je+sur+comptable+a+la+banque+BCB+je+vais+vir%c3%a9e+$6.million+a+la+etrangerDUR=0100VIEW=din_loc=Cher+Ami+Salut,+Je+suis+MR,+Ashraf+Cotu+comptable+a+la+BANQUE+COMERCIALE+DU+BURKINA+(BCB),+je+vais+vir%c3%a9e+$6.million+(usd)+a+la+etranger+si+vous+pour+vais+me+aide+et+ci+%c3%a7a+vous+intersse+je+vous+enverrons+tous+les+d%c3%a9tails+sur+la+fa%c3%a7on+dont+on+va+fait+le+demache+et+%c3%a9galement+noter+que+vous+aurez+30%25+du+montant+indiqu%c3%a9+.si+vous+%c3%aates+d%27accord+pour+m%27aider+%c3%a0+ex%c3%a9cuter+cette+transaction.+reponne+moi+rapidement+et+s.v.p+ces+un+propossition+confidentielle+merciTYPE=10 Copyright ) 2009 All Rights Reserved www.yahoo.com Privacy Policy: http://privacy.yahoo.com/privacy/us Terms of Service: http://docs.yahoo.com/info/terms/
Job Opportunities
TalentRepublic.NET [demime 1.01d removed an attachment of type image/jpg which had a name of c:/TRAd2/Images/TR_EAD_031.jpg] [demime 1.01d removed an attachment of type image/jpg which had a name of c:/TRAd2/Images/TR_EAD_032.jpg] [demime 1.01d removed an attachment of type image/jpg which had a name of c:/TRAd2/Images/TR_EAD_033.jpg] [demime 1.01d removed an attachment of type image/jpg which had a name of c:/TRAd2/Images/TR_EAD_034.jpg]
Re: Building bacula-fd on OpenBSD 4.5
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Hi Stuart. On 2009-10-12, Stuart Henderson wrote: I'm trying to compile Bacula 3.0.2 with the source code from the official site. For it I've dowloaded the bacula-3.0.2.tar.gz file. if you need bacula 3.x on 4.5, probably the easiest way is to use the port from -current, it will most likely work. Apparently the same happens with FreeBSD 4.9. Some BSD make implementations can't handle Bacula's makefiles. Using GNU make I no longer have the mentioned problem. Thanks to both for your replies. Regards, Daniel iEYEARECAAYFAkrWN5QACgkQZpa/GxTmHTeLVQCgllexPhlYTYdx9zIacK6luBy8 IPUAnRn81bDwd0VNRFinhR21Q06LWfdn =2VLq -END PGP SIGNATURE-
Re: Unable to set volume using mixerctl
On Wed, Oct 14, 2009 at 08:40:49PM +0300, Antti Harri wrote: On Wed, 14 Oct 2009, Jacob Meuser wrote: On Tue, Oct 13, 2009 at 09:04:17PM +0300, Antti Harri wrote: Hi, my cmedia sound card broke down, so I started using the integrated sound device (auvia(4)). I'm able to play music just fine however I cannot change the volume at all. Is the hardware just crappy or is the driver buggy? probably crappy hardware. at least, the mixer interface for ac97 codecs is all the same. I mean, all ac97 drivers use the same mixer code (dev/ic/ac97*). so, pretty unlikely the driver code is that buggy, unless everyone else is having problems and not reporting them. Too bad. :-/ Oh, I forgot to mention I'm also using aucat -l -v 115. If you feel like playing with experimental stuff, here's a trivial utility to control aucat volume: http://caoua.org/alex/obsd/aucatvol.tar.gz $ aucatvol usage: aucatvol [-c chan] [-f dev] vol -f dev aucat midi contol device, default is aucat:0 -c client number (default is 0) to change the volume. Client numbers are persistent, ie if you run og123, it will tend to get always the same number and vol is the volume with the same units as in the -v option of aucat. The volume is persistent too; ie clients tend to keep their volume accross restarts. HTH -- Alexandre
Re: no hostname in mails sent with smtpd in a crontab
this was discussed with jacekm@ and the issue is actually a bit
trickier than i initially assumed, we'll fix that soon but it's
not a five minutes fix as it looks like ;)
Gilles
On Tue, Oct 13, 2009 at 09:51:59AM +0200, Nicolas Letellier wrote:
I tested with the latest files on CVS (this morning), the error is
always here.
To reproduce the problem:
- edit crontab root
- set a fake cronjob which print anything: */1 * * * * ls /
- set a root alias (/etc/mail/aliases) to an other mail (root:
yourem...@yourprovider.com)
And wait to receive the mail... See the header (I replaced my full
hostname by sub.domain.net, and the root alias by yourem...@free.fr)
From - Tue Oct 13 09:34:56 2009
X-Account-Key: account4
X-UIDL: 1255419242.14725.mrelay6-g25
X-Mozilla-Status: 0001
X-Mozilla-Status2:
X-Mozilla-Keys:
Return-Path: r...@sub.domain.net
Delivered-To: yourem...@free.fr
Received: (qmail 14687 invoked from network); 13 Oct 2009 07:34:02 -
Received: from mx23-g26.free.fr (HELO sub.domain.net) (212.xx.xx.xx)
by mrelay6-g25.free.fr with SMTP; 13 Oct 2009 07:34:02 -
Received: from sub.domain.net ([82.xxx.xx.xxx])
by mx2-g20.free.fr (MXproxy) for yourem...@free.fr ;
Tue, 13 Oct 2009 09:34:02 +0200 (CEST)
X-ProXaD-SC: state=HAM score=10
Received: from localhost (0...@localhost [IPv6:::1])
by sub.domain.net (OpenSMTPD) with ESMTP id
1255419241.POaAAxCh6duP43wr
for r...@sub.domain.net; Tue, 13 Oct 2009 09:34:01 +0200 (CEST)
Date: Tue, 13 Oct 2009 09:34:01 +0200 (CEST)
Message-Id: 5391984582864661144.enqu...@sub.domain.tld
From: root (Cron Daemon)
To: root
Subject: Cron r...@esgaroth ls /
Auto-Submitted: auto-generated
X-Cron-Env: SHELL=/bin/sh
X-Cron-Env: PATH=/bin:/sbin:/usr/bin:/usr/sbin
X-Cron-Env: HOME=/var/log
X-Cron-Env: LOGNAME=root
X-Cron-Env: USER=root
As you can see, the problem is the From field. There is no hostname
here. So, a MUA can't answer to it.
If you send a mail with : echo hello world | mail
youru...@yourprovider.com, no problem. The problem is *only* when a mail
is sent from and by a crontab with OpenSMTPd (no problems with Sendmail
or Postfix).
Regards,
Nicolas
Le 13/10/2009 08:52, Gilles Chehade a icrit :
I'll fix this by this week-end, yesterday's late bug tracking of this
issue
was not successful, I can totally reproduce it on my production
server, but
not on the box im hacking on ...
Gilles
Nicolas Letellier wrote:
Hello.
I'm on a OPENBSD_4_6. I use smtpd insted of sendmail. All works
perfect with it, except one point. When a mail is sent from a
crontab, the mail received has this in the header:
From: root (Cron Daemon)
I have no hostname, no domain, nothing. Just the user in the From part.
This case is only when a mail is sent from a crontab (crontab -e -u
root). With this line for example:
*/1 * * * * echo test
So, we wan't answer to this mail, or know who is the machine which
send it. However, in other informations in the header, we wan see the
domain in 'Received' parts.
See my /etc/mail/smtpd.conf:
listen on sk0
hostname my.hostname.tld
map aliases { source db /etc/mail/aliases.db }
accept from all for local deliver to mbox
accept for all relay
See the end of /etc/mail/aliases
root: u...@myprovider.tld
And, other question... Why Cron Daemon AND root are printed in my
From?
Thanks.
Regards,
--
Nicolas
--
Gilles Chehade
freelance developer/sysadmin/consultant
http://www.poolp.org
Re: Building bacula-fd on OpenBSD 4.5
On Wed, Oct 14, 2009 at 05:41:42PM -0300, Daniel Bareiro wrote: Apparently the same happens with FreeBSD 4.9. Some BSD make implementations can't handle Bacula's makefiles. Using GNU make I no longer have the mentioned problem. Thanks to both for your replies. Yeah. Looking at the port would have helped there too (USE_GMAKE=Yes). -ME
Pročitajte muškarca za 10 minuta
Top Shop Top E-revija: 41, 14 oktobar 2009. PraktiD na reE!enja i saveti za bolji Eivot POD ETNA l Budi fit! l Lepota l Zdrav Eivot DomaDinstvo l Zabava i deca l Quelle katalog l Knjige Top Shop HIT TV proizvodi! Ab Rocket - fitnes sprava Ab Rocket Leg Magic - fitnes sprava Leg Magic Dry Cooker - tiganj Dry Cooker Dream Rest - krevet na naduvavanje Dream Rest Jastuk od heljde - Natural Dream ... Heljda jastuk 20 saveta: b ProD itajteb muE!karca Proverite kako da proD itate svog pratioca u prvih 10 minuta prvog sastanka. OsluE!nite E!ta priD a... E ta znate o glavobolji i njenom leD enju? Slabija ili jaD a glavobolja, sve jedno je, uvek je nepodnoE!ljiva... UblaEite ili otklonite bez uzimanja lekova. Pilates: VeEba za seksi stomak Predstavljamo vam pilates veEbe za zatezanje donjih trbuE!nih miE!iDa. VeEbajte sa nama... E=enski sindrom praznog ormara Da li znate da jedna proseD na Eena ima oko 100 komada odevnih predmeta u svom ormaru? 20 saveta koji De Vam pomoDi da ... 20 saveta: b ProD itajteb muE!karca Ne, ovoga puta Vam ne dajemo savete kako da b uhvatiteb muE!karca svojih snova - nego kako da ga proD itate u prvih 10 minuta prvog sastanka. Ako obratite paEnju na neke detalje, moDi Dete da otkrijete mnoge crte njegovog karaktera. [ViE!e informacija] Najpopularnije! Ab Tronic X2 - Pojas za stomak FlavorWave Turbo Oven - turbo rerna Velform Enhance Bra - Prsluk za podizanje grudi Ab Tronic X2 - Pojas za stomak FlavorWave Turbo Oven - turbo ... Velform Enhance Bra - Prsluk za ... I do 7 puta bolji efekat od klasiD nog veEbanja... Koristite ga samo 10 minuta dnevno! Aparat koji bez problema kuva i peD e sveEu i smrznutu hranu i to D ak tri puta brEe. Za samo nekoliko sekundi ovaj prsluk De podiDi VaE!e grudi, oblikovati ih i naD initi senzualnim. Cena:: 7.990 RSD [ViE!e informacija] Cena:: 11.490 RSD [ViE!e informacija] Cena:: 3.490 RSD [ViE!e informacija] E ta znate o glavobolji? E ta znate o glavobolji? Slabija ili jaD a glavobolja, sve jedno je - uvek je nepodnoE!ljiva, uvek je neprijatna i D esto ne znamo kako da izaDemo na kraj s njom. Saznajte viE!e o glavobolji i kako da pomognemo sebi bez lekova. [ViE!e informacija] Novo u Top Shop-u: Pasta Primo - posude za kuvanje testenine 2 x Snuggie - Debe sa rukavima uz POPUST! Total Gym Shaper - KuDni trenaEer Pasta Primo - posude za kuvanje ... 2 x Snuggie - 2 Debeta sa rukavima ... Total Gym Shaper - KuDni trenaEer - 25% Skuvajte, ocedite, posluEite i odloEite u friEider - sve u jednoj istoj posudi. Komplet od 2 Debeta za hladne dane. Zgrejte se i nesmetano se koristite rukama! Bez obzira da li ste u formi ili ne, ovaj fitnes sprava odvogara svima! VeEbajte bez optereDenja. Cena:: 2.790 RSD [ViE!e informacija] Cena:: 2.990 RSD [ViE!e informacija] Cena:: 21.990 RSD [ViE!e informacija] Pilates: veEba za opuE!tanje i ... Pilates: veEbe seksi stomak Predstavljamo vam pilates veEbe za zatezanje donjih trbuE!nih miE!iDa. Ovo su veEbe koje se zaista fokusiraju na trbuE!ne miE!iDe osiguravajuDi vam lepu figuru. VeEbajte sa nama! [ViE!e informacija] JESEN JE STIGLA - veEbajte u kuDi uz ekstra popuste! Leg Magic Super - fitnes sprava Multi-Functional Bench - viE!enamenski benD Winsor pilates - Pilates trening na 3 DVD-a Leg Magic Super - fitnes sprava Multi-Functional Bench - viE!enamenski ... Winsor pilates - Pilates trening ... - 10% - 10% - 62% Sprava za zatezanje nogu uz dodatke koji unapreDuju efekat. Za vas uz 10% popusta! VeEbajte sve najvaEnije grupe miE!iDa uz opuE!tajuDu masaEu leDa. Prilagodite bench sebi. Pilates trening na 3 DVD-a. Zategnite miE!iDe, skinite kilograme i oseDajte se bolje! Cena:: 8.091 RSD [ViE!e informacija] Cena:: 6.741 RSD [ViE!e informacija] Cena:: 1.341 RSD [ViE!e informacija] E=enski sindrom E=enski sindrom praznog ormara Da li znate da jedna tipiD na predstavnica Eenskog pola ima oko 100 komada odevnih predmeta u svom ormaru od kojih nosi, verovali ili ne, samo oko 30? Saznajte viE!e o tome zaE!to Eene gomilaju stvari i kako da reE!e taj problem. [ViE!e informacija] Veliko jesenje spremanje It Works - blokovi za super D iE!Denje Space Bag Cube Set - kockaste vakuum vreDe Space Bag Tote-vakuumske vreDe sa postoljem It Works - blokovi za super D iE!Denje Space Bag Cube Set - kockaste ... Space Bag Tote-vakuumske vreDe ... - 29% 30 sunDera za D iE!Denje bez hemikalija. PoEurite ostalo je joE! samo 6 pakovanja! Za skladiE!tenje sve bespotrebne garderobe i posteljine. Smanjite nered u ormarima! ObiD ne kutije najD eE!De nisu dovoljno D vrste,potreban Vam je Space Bag Tote! Cena:: 2.490 RSD [ViE!e informacija] Cena:: 2.690 RSD [ViE!e informacija] Cena:: 4.990 RSD [ViE!e informacija] Ovu elektronsku poE!tu primate, ukoliko ste svojevoljno ostavili svoju e-mail adresu na nekom od sajtova Top Shop-a, uD estvovali u naE!oj poklon igri ili nagradnom kvizu ili se prijavili za e-D asopis Top Shop-a ili nekog od
Re: no hostname in mails sent with smtpd in a crontab
On Wed, Oct 14, 2009 at 1:52 PM, Gilles Chehade gil...@openbsd.org wrote:
this was discussed with jacekm@ and the issue is actually a bit
trickier than i initially assumed, we'll fix that soon but it's
not a five minutes fix as it looks like ;)
as a bystander/observer to this discussion thread, this sounds
interesting and I was wondering if there would/could be any narrative
to the core of the problem and fix?
--patrick
Gilles
On Tue, Oct 13, 2009 at 09:51:59AM +0200, Nicolas Letellier wrote:
I tested with the latest files on CVS (this morning), the error is
always here.
To reproduce the problem:
- edit crontab root
- set a fake cronjob which print anything: */1 * * * * ls /
- set a root alias (/etc/mail/aliases) to an other mail (root:
yourem...@yourprovider.com)
And wait to receive the mail... See the header (I replaced my full
hostname by sub.domain.net, and the root alias by yourem...@free.fr)
From - Tue Oct 13 09:34:56 2009
X-Account-Key: account4
X-UIDL: 1255419242.14725.mrelay6-g25
X-Mozilla-Status: 0001
X-Mozilla-Status2:
X-Mozilla-Keys:
Return-Path: r...@sub.domain.net
Delivered-To: yourem...@free.fr
Received: (qmail 14687 invoked from network); 13 Oct 2009 07:34:02 -
Received: from mx23-g26.free.fr (HELO sub.domain.net) (212.xx.xx.xx)
by mrelay6-g25.free.fr with SMTP; 13 Oct 2009 07:34:02 -
Received: from sub.domain.net ([82.xxx.xx.xxx])
by mx2-g20.free.fr (MXproxy) for yourem...@free.fr ;
Tue, 13 Oct 2009 09:34:02 +0200 (CEST)
X-ProXaD-SC: state=HAM score=10
Received: from localhost (0...@localhost [IPv6:::1])
by sub.domain.net (OpenSMTPD) with ESMTP id
1255419241.POaAAxCh6duP43wr
for r...@sub.domain.net; Tue, 13 Oct 2009 09:34:01 +0200 (CEST)
Date: Tue, 13 Oct 2009 09:34:01 +0200 (CEST)
Message-Id: 5391984582864661144.enqu...@sub.domain.tld
From: root (Cron Daemon)
To: root
Subject: Cron r...@esgaroth ls /
Auto-Submitted: auto-generated
X-Cron-Env: SHELL=/bin/sh
X-Cron-Env: PATH=/bin:/sbin:/usr/bin:/usr/sbin
X-Cron-Env: HOME=/var/log
X-Cron-Env: LOGNAME=root
X-Cron-Env: USER=root
As you can see, the problem is the From field. There is no hostname
here. So, a MUA can't answer to it.
If you send a mail with : echo hello world | mail
youru...@yourprovider.com, no problem. The problem is *only* when a mail
is sent from and by a crontab with OpenSMTPd (no problems with Sendmail
or Postfix).
Regards,
Nicolas
Le 13/10/2009 08:52, Gilles Chehade a icrit :
I'll fix this by this week-end, yesterday's late bug tracking of this
issue
was not successful, I can totally reproduce it on my production
server, but
not on the box im hacking on ...
Gilles
Nicolas Letellier wrote:
Hello.
I'm on a OPENBSD_4_6. I use smtpd insted of sendmail. All works
perfect with it, except one point. When a mail is sent from a
crontab, the mail received has this in the header:
From: root (Cron Daemon)
I have no hostname, no domain, nothing. Just the user in the From part.
This case is only when a mail is sent from a crontab (crontab -e -u
root). With this line for example:
*/1 * * * * echo test
So, we wan't answer to this mail, or know who is the machine which
send it. However, in other informations in the header, we wan see the
domain in 'Received' parts.
See my /etc/mail/smtpd.conf:
listen on sk0
hostname my.hostname.tld
map aliases { source db /etc/mail/aliases.db }
accept from all for local deliver to mbox
accept for all relay
See the end of /etc/mail/aliases
root: u...@myprovider.tld
And, other question... Why Cron Daemon AND root are printed in my
From?
Thanks.
Regards,
--
Nicolas
--
Gilles Chehade
freelance developer/sysadmin/consultant
http://www.poolp.org
Re: no hostname in mails sent with smtpd in a crontab
On Wed, Oct 14, 2009 at 03:01:57PM -0700, patrick keshishian wrote: On Wed, Oct 14, 2009 at 1:52 PM, Gilles Chehade gil...@openbsd.org wrote: this was discussed with jacekm@ and the issue is actually a bit trickier than i initially assumed, we'll fix that soon but it's not a five minutes fix as it looks like ;) as a bystander/observer to this discussion thread, this sounds interesting and I was wondering if there would/could be any narrative to the core of the problem and fix? smtpd currently does no content inspection. However, even the most basic SMTP implementation needs to parse message content, eg. to add missing domainpart to From:, add missing Date: or Message-Id: or to strip Return-Path:. So, we need to come up with a solution that will cater for all these cases, and possibly more.
Re: Atheros 5424 - Acer Aspire One
On Wed, Oct 14, 2009 at 08:53:17PM +0200, Peter Hessler wrote: the AR5424 in Aspire Ones don't work. Sorry. FYI - It's not just in Aspires. My thinkpad T400 has one yet to be supported. montagueneal dmesg | grep ath0 ath0 at pci2 dev 0 function 0 Atheros AR5424 rev 0x01: apic 1 int 17 (irq 11) ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR02W, address 00:22:69:86:96:77 On 2009 Oct 14 (Wed) at 16:26:02 -0200 (-0200), Murilo da Silva Ijanc wrote: :Hi. : :I'm having trouble connecting to a wireless network. My card is an Atheros :AR5424! I do not see the networks, much less connect. The dmesg can speak :for me anymore. : : :regards : : :-- :MuriloBSD :silc.dotbsd.org, dotbsd :http://www.dotbsd.org/ --- :ath0 at pci1 dev 0 function 0 Atheros AR5424 rev 0x01: apic 4 int 16 (irq 11) :ath0: AR5424 14.2 phy 7.0 rf 0.0, WOR5_ETSIC, address 00:24:2c:9a:1f:ff --- You can tell from the 'rf 0.0' part. -- Silverman's Law: If Murphy's Law can go wrong, it will.
Re: ZTE-MF626 USB Modem
On Wed, Oct 14, 2009 at 01:14:00PM -0500, Sergio Andris Gsmez del Real wrote: Thanks for the reply. Indeed, I use usb_modeswitch under Linux, it is, however, quite just for Linux, cause it reloads a certain kernel module. With GENERIC kernel, usb_modeswitch does not even recognize the device. However, compiling it (the kernel) without umass support, that is, the device being ugen, it does. Now, when I boot GENERIC with the modem plugged-in, then I get the microSD that is 'inside my modem' (not the cd-rom device) recognized, but no modem... If any idea would be wonderful, and sorry for my horrible english. OpenBSD already does this modeswitch dance automatically for loads of different USB modems without the user having to play with all kinds of programs like in linux. If only the developers had hardware like yours it would probably already be supported...
Re: no hostname in mails sent with smtpd in a crontab
On Thu, Oct 15, 2009, Jacek Masiulaniec wrote: smtpd currently does no content inspection. However, even the most basic SMTP implementation needs to parse message content, eg. to add missing domainpart to From:, add missing Date: or Message-Id: or to strip Return-Path:. So, we need to come up with a solution that will cater for all these cases, and possibly more. You need that only in an MSA, not in an MTA. My MTA package doesn't offer that either, that's why it uses some other software as MSA which adds all the required headers if they are missing (a decent MUA doesn't need any fixups, but you can't rely on that as there are obviously other programs that submit mail).
Subscreva a proposta gratuita sem compromisso e ganhe 2 prémios exclusivos
Caso tenha dificuldade em visualizar, por favor clique no link abaixo www.informacaobyweb.com/decoproteste.htm Ao abrigo do Dec.Lei 67/98 de 26 de Outubro, o destinatario podera proceder ` rectificagco ou cancelamento dos seus dados, conforme o disposto nos artigos 10: e 11:. Se pretender remover o seu enderego de email, por favor no link abaixo http://www.informacaobyweb.com/unsubcribe/index.php?a=
script
Hi there
my version of ksh:
$what /bin/ksh
/bin/ksh
Copyright (c) 1989, 1993
$OpenBSD: mknod.c,v 1.1 2005/10/06 06:39:36 otto Exp $
PD KSH v5.2.14 99/07/13.2
I cannot figure out what is wrong with the following code
#! /bin/ksh
for (( i=9; i0; i-- ))
do echo $i
done
output:
syntax error: '((' unexpected.
why?
regards
--
igor denisov.
Re: script
On Wed, October 14, 2009 11:11 pm, igor denisov wrote:
Hi there
my version of ksh:
$what /bin/ksh
/bin/ksh
Copyright (c) 1989, 1993
$OpenBSD: mknod.c,v 1.1 2005/10/06 06:39:36 otto Exp $
PD KSH v5.2.14 99/07/13.2
I cannot figure out what is wrong with the following code
#! /bin/ksh
for (( i=9; i0; i-- ))
do echo $i
done
output:
syntax error: '((' unexpected.
why?
regards
--
igor denisov.
OpenBSD's ksh does not support that syntax for 'for':
for name [in word ...]; do list; done
For each word in the specified word list, the parameter name is
set to the word and list is executed. If in is not used to spec-
ify a word list, the positional parameters ($1, $2, etc.) are
used instead. For historical reasons, open and close braces may
be used instead of do and done e.g. for i; { echo $i; }. The ex-
it status of a for statement is the last exit status of list; if
list is never executed, the exit status is zero.
--
Joe Gidi
j...@entropicblur.com
Re: script
On Thu, Oct 15, 2009 at 10:11 AM, igor denisov
denisovigor1...@rambler.ru wrote:
Hi there
my version of ksh:
$what /bin/ksh
/bin/ksh
B B B B Copyright (c) 1989, 1993
B B B B $OpenBSD: mknod.c,v 1.1 2005/10/06 06:39:36 otto Exp $
B B B B PD KSH v5.2.14 99/07/13.2
I cannot figure out what is wrong with the following code
#! /bin/ksh
for (( i=9; i0; i-- ))
B do echo $i
B done
output:
syntax error: '((' unexpected.
why?
regards
--
igor denisov.
the short answer would be 'ksh is not bash'
--
O ascii ribbon campaign - stop html mail - www.asciiribbon.org
Re: script
On Wed, Oct 14, 2009 at 8:11 PM, igor denisov
denisovigor1...@rambler.ru wrote:
Hi there
my version of ksh:
$what /bin/ksh
/bin/ksh
Copyright (c) 1989, 1993
$OpenBSD: mknod.c,v 1.1 2005/10/06 06:39:36 otto Exp $
PD KSH v5.2.14 99/07/13.2
I cannot figure out what is wrong with the following code
#! /bin/ksh
for (( i=9; i0; i-- ))
do echo $i
done
output:
syntax error: '((' unexpected.
why?
try:
#!/bin/ksh
i=9
while [ $i -gt 0 ] ; do
echo $i
i=$((i-1))
done
Re: Forum engine
On Wed, Oct 14, 2009 at 10:06 AM, Maxime DERCHE max...@mouet-mouet.net wrote: Hello, On Sun, 11 Oct 2009 13:13:00 -0400 Samuel Baldwin recursive.for...@gmail.com wrote: I've heard good things about FluxBB and PunBB, but really you should consider using a mailing list instead of a server. I second on that one : FluxBB (which is based on PunBB) may be a good choice. It only includes what is really needed in a public web forum, and nothing else (for exemple, it does not includes a private messaging feature), so it is not as bloated as other forum engines might be, and it even works with PostgreSQL (by this I mean it is not limited to just MySQL...). But it's also somewhat hard to maintain from a sysadmin point of view. You have to modify the base source code by your own hands if you want to add some feature; the idea behind this is that you are forced to know what you do to add something that may be broken or insecure, so the community does not give you any patch nor automated process to modify the base source code. Regards, Maxime -- Maxime DERCHE GnuPG public key ID : 0x9A85C4C0 (fingerprint : 0FDC 16AF 5A5B 1908 786C 2B85 2D3C C83E 9A85 C4C0) http://www.mouet-mouet.net/maxime/blog/index.php Something that really bugs me about web software is how they limit themselves to MySQL. I chose PunBB because it supported SQLite and had a solid module base, along with a builtin update manager. For OS forums, you could write support for your chosen DBMS into it and submit a patch. For closed source forums you're screwed. And if they really piss you off, you could always write your own. But yeah, I agree, OT. -- Aaron Mason - Programmer, open source addict - Oh, why does everything I whip leave me?
Re: script
On 15 October 2009 c. 07:33:36 patrick keshishian wrote:
On Wed, Oct 14, 2009 at 8:11 PM, igor denisov
denisovigor1...@rambler.ru wrote:
Hi there
my version of ksh:
$what /bin/ksh
/bin/ksh
Copyright (c) 1989, 1993
$OpenBSD: mknod.c,v 1.1 2005/10/06 06:39:36 otto Exp $
PD KSH v5.2.14 99/07/13.2
I cannot figure out what is wrong with the following code
#! /bin/ksh
for (( i=9; i0; i-- ))
do echo $i
done
output:
syntax error: '((' unexpected.
why?
try:
#!/bin/ksh
i=9
while [ $i -gt 0 ] ; do
echo $i
i=$((i-1))
done
Or:
for i in `jot 10 9 0 -1`; do
echo $i
done
--
Best wishes,
Vadim Zhukov
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing in e-mail?
