Re: hibernation with APM
Hi Marco. Thanks, but I'm not asking about suspend. apmd -z starts suspend, at least with my Thinkpad and Compaq, both with Phoenix APM BIOSes. Hibernation is sometimes called save to disk suspend, while suspend is then called save to RAM suspend. Regards, David On Sat, 6 Aug 2011, Marco Peereboom wrote: run apmd at startup then type apm -z to initiate it. Works like a charm on most laptops of quality. On Sun, Aug 07, 2011 at 12:54:22AM +0200, David Vasek wrote: Hello all, does anybody please know if there is a way to initiate hibernation on APM equipped laptops that support it *from software*? Thanks for answers. Regards, David
Re: status of ACPI suspend/resume on Thinkpad T60 w/ T7200 processor?
On Sat, Aug 06, 2011 at 03:24:42AM +0200, Benny Lofgren wrote: On 2011-08-05 17.51, Pedro la Peu wrote: On Friday 05 August 2011 13:35:16 Jona Joachim wrote: There are other resume related problems on my Stinkpad Z61M (console is blank after resume and bge0 can no longer get a link) but at least the machine and X resume enough to be useful. I've got a Z61p with what I assume is similar hardware (haven't got mine handy right now so can't get a dmesg) and exactly the same symptoms. The resume would indeed be useful even with the blank text console if only the network got back online, but alas no. If memory serves, not even the wpi wifi survives a suspend/resume cycle. wpi(4) did come back nicely back when resume worked on my T60. However the console never survived a resume, only X was usable. Best regards, Jona
installing OpenBSD 4.9 to external USB harddisk: Disk does not boot
Hi all, i'm attempting to diagnose if there was a problem with installing OpenBSD to an external USB hard disk or not. The disk is a Western Digital 2TB disk, should it matter. Needless to say, the install went fine on to the disk; all the sets were unpacked, and I rebooted the machine as per the instructions at the end. During install, I let the installer auto partition the disk in question, and that ended up creating a sensible layout that i could tell. Yet, when i reboot the machine, and ask the BIOS to boot from the external usb disk, eventually nothing happens, and my machine then defaults to booting off my internal disk. What could be causing this? i've had other operating systems on this external USB disk in the past, so I know it's perfectly capable of being detected correctly by the BIOS. Since though I can't get at the disk in question, I am unsure what information I can gather for you -- under Linux using cfdisk, the best information I can gather is the following: Number Flags Part Type FilesystemLabelSize -- Pri/Ext Free space0.00MB 4 Bootable Primary sun-ufs2000396MB And: Partition info -- Possible partition device: /dev/sdb4 Partition type: Primary Partition size in bytes: 2000396288512B Partition size in sectors: 3907024001s Portion of the hard disk: 100% Filesystem type: sun-ufs System type: 0xa6 System type name: OpenBSD Position: 64s-3907024064s Start (cyl,heads,sector): 0,1,1 End (cyl,heads,sector): 243200,254,62 Flags: boot If there's a means of providing more information to help with this, please say. TIA for any help. Kindly, Michael
Re: installing OpenBSD 4.9 to external USB harddisk: Disk does not boot
hi, all, This should be an hardware issue, I've used an usb external drive with success. whith a dell A6 or A7 version of Dell bios, boot usb enabled, with a (double-usb) eternal drive, using BSD4.2 filesystem. so maybe you need a bios upgrade or a double-usb-drive to be able to boot or to use BSD4.2 fs on / ? From: Michael Treibton mtreib...@googlemail.com Sent: Sun Aug 07 12:32:45 CEST 2011 To: misc@openbsd.org Subject: installing OpenBSD 4.9 to external USB harddisk: Disk does not boot Hi all, i'm attempting to diagnose if there was a problem with installing OpenBSD to an external USB hard disk or not. The disk is a Western Digital 2TB disk, should it matter. Needless to say, the install went fine on to the disk; all the sets were unpacked, and I rebooted the machine as per the instructions at the end. During install, I let the installer auto partition the disk in question, and that ended up creating a sensible layout that i could tell. Yet, when i reboot the machine, and ask the BIOS to boot from the external usb disk, eventually nothing happens, and my machine then defaults to booting off my internal disk. What could be causing this? i've had other operating systems on this external USB disk in the past, so I know it's perfectly capable of being detected correctly by the BIOS. Since though I can't get at the disk in question, I am unsure what information I can gather for you -- under Linux using cfdisk, the best information I can gather is the following: Number Flags Part Type FilesystemLabel Size - - Pri/Ext Free space 0.00MB 4 Bootable Primary sun-ufs 2000396MB And: Partition info - - Possible partition device: /dev/sdb4 Partition type: Primary Partition size in bytes: 2000396288512B Partition size in sectors: 3907024001s Portion of the hard disk: 100% Filesystem type: sun-ufs System type: 0xa6 System type name: OpenBSD Position: 64s-3907024064s Start (cyl,heads,sector): 0,1,1 End (cyl,heads,sector): 243200,254,62 Flags: boot If there's a means of providing more information to help with this, please say. TIA for any help. Kindly, Michael Cordialement Francois Pussault 3701 - 8 rue Marcel Pagnol 31100 ToulouseB FranceB +33 6 17 230 820 B +33 5 34 365 269 fpussa...@contactoffice.fr
Re: installing OpenBSD 4.9 to external USB harddisk: Disk does not boot
hi, On 7 August 2011 12:19, Francois Pussault fpussa...@contactoffice.fr wrote: hi, all, This should be an hardware issue, I've used an usb external drive with success. whith a dell A6 or A7 version of Dell bios, boot usb enabled, with a (double-usb) eternal drive, using BSD4.2 filesystem. so maybe you need a bios upgrade or a double-usb-drive to be able to boot or to use BSD4.2 fs on / ? i'd agree with you if it wasn't for the fact that NetBSD has been on this drive at some point, and has booted from it just fine, unfortunately only OpenBSD seems to suffer being able to work off this drive. I'm wondering if it's down to how the other BSDs partition the disk? it's entirely possible other OSes gave a small partition for /boot which the bios could pick up on? that being the case, is that easy to do at install time? i'll have to read the docs i suppose, assuming its even a good idea. But bios upgrade? No, i really can't see how that's correct given evidence to the contrary. Thanks, Michael
Re: installing OpenBSD 4.9 to external USB harddisk: Disk does not boot
if other BSD can boot, you can eliminate bios upgrade solution ;) From: Michael Treibton mtreib...@googlemail.com Sent: Sun Aug 07 13:31:11 CEST 2011 To: Francois Pussault fpussa...@contactoffice.fr Subject: Re: installing OpenBSD 4.9 to external USB harddisk: Disk does not boot hi, On 7 August 2011 12:19, Francois Pussault fpussa...@contactoffice.fr wrote: hi, all, This should be an hardware issue, I've used an usb external drive with success. whith a dell A6 or A7 version of Dell bios, boot usb enabled, with a (double-usb) eternal drive, using BSD4.2 filesystem. so maybe you need a bios upgrade or a double-usb-drive to be able to boot or to use BSD4.2 fs on / ? i'd agree with you if it wasn't for the fact that NetBSD has been on this drive at some point, and has booted from it just fine, unfortunately only OpenBSD seems to suffer being able to work off this drive. I'm wondering if it's down to how the other BSDs partition the disk? it's entirely possible other OSes gave a small partition for /boot which the bios could pick up on? that being the case, is that easy to do at install time? i'll have to read the docs i suppose, assuming its even a good idea. But bios upgrade? No, i really can't see how that's correct given evidence to the contrary. Thanks, Michael Cordialement Francois Pussault 3701 - 8 rue Marcel Pagnol 31100 ToulouseB FranceB +33 6 17 230 820 B +33 5 34 365 269 fpussa...@contactoffice.fr
Re: installing OpenBSD 4.9 to external USB harddisk: Disk does not boot
On Sun, 7 Aug 2011, Michael Treibton wrote: If there's a means of providing more information to help with this, please say. I guess the devs would like to see the output from OpenBSD fdisk(8) and disklabel(8), rather than from Linux. You can obtain those by selecting the (S)hell in the install program and using the commands above. The key part probably is what, if anything, is being displayed by the bootloader before the BIOS boots from the internal disk and in what state was the disk and the MBR table prior the install. Regards, David
Re: hibernation with APM
Oh I am sorry I missed that. Hibernation is being worked on. There was a measure of some success during the last hackathon. Any release now ;-) On Sun, Aug 07, 2011 at 08:29:49AM +0200, David Vasek wrote: Hi Marco. Thanks, but I'm not asking about suspend. apmd -z starts suspend, at least with my Thinkpad and Compaq, both with Phoenix APM BIOSes. Hibernation is sometimes called save to disk suspend, while suspend is then called save to RAM suspend. Regards, David On Sat, 6 Aug 2011, Marco Peereboom wrote: run apmd at startup then type apm -z to initiate it. Works like a charm on most laptops of quality. On Sun, Aug 07, 2011 at 12:54:22AM +0200, David Vasek wrote: Hello all, does anybody please know if there is a way to initiate hibernation on APM equipped laptops that support it *from software*? Thanks for answers. Regards, David
I CURSO DE APLICACIONES WEB CON JAVA - JSP
[IMAGE] I CURSO DE APLICACIONES WEB CON JAVA - JSP DIRIGIDO A: Usuarios con un nivel basico de programadores JAVA OBJETIVO: Capacitar al alumno en la creacisn de aplicaciones WEB aplicando la arquitectura cliente-servidor en la plataforma de computacisn Java utilizando la tecnologma de JSP(JAVA SERVER PAGES) y Servlets. Al finalizar el curso los alumnos tendran la capacidad de construir servidores de pagina Web, diseqar, desarrollar, configurar y mantener aplicaciones distribuidas y servicios para ser ejecutados en Internet, explotando asm todas las ventajas provistas por la plataforma de Computacisn Java. El estudiante desarrollara un proyecto completo a lo largo del curso donde pondra en practica las ticnicas de programacisn adquiridas. TEMARIO * Instalacisn y Configuracion del Servidor JSP * Servidor de aplicaciones Jakarta TomCat * Sintaxis basica de JPS * Uso de Herramientas y Entorno * ScriptLets * Variables de Sesisn * Objetos Implicitos * Creacisn de Formularios * Utilizacisn de Servlets INSCRIPCIONES: Calle Zela #495 - Altura Calle Deustua DOCENTE: Ing. Elard Rodriguez Marca DURACION: 1 Mes HORARIOS A.SABADOS 3:30 p.m. - 6:30 p.m. INICIO : Sabado 06 de Agosto MATRICULA:S/.10.00 INVERSION: S/.100.00 GRUPALES S/. 80.00 (3 Participantes) Incluye Certificacisn por 100 hrs. Cel: 952639757 RESERVA TU MATRICULA POR INTERNET Y NO PAGAS INSCRIPCION WWW.INNOVAEUREKA.INFO Confirmar inscripcisn en Calle Zela # 495 (Altura de la calle Deustua)javaRESERVA TU MATRICULA POR INTERNET Y NO PAGAS INSCRIPCION WWW.INNOVAEUREKA.INFO Confirmar inscripcisn en Calle Zela # 495 (Altura de la calle Deustua)
Re: installing OpenBSD 4.9 to external USB harddisk: Disk does not boot
On Sun, Aug 07, 2011 at 02:01:44PM +0200, David Vasek wrote: On Sun, 7 Aug 2011, Michael Treibton wrote: If there's a means of providing more information to help with this, please say. I guess the devs would like to see the output from OpenBSD fdisk(8) and disklabel(8), rather than from Linux. You can obtain those by selecting the (S)hell in the install program and using the commands above. Yes, we would. :-). All the normal information (e.g. dmesg) and a serial capture of the install process so we can see exactly what the installer was saying and was told. The key part probably is what, if anything, is being displayed by the bootloader before the BIOS boots from the internal disk and in what state was the disk and the MBR table prior the install. Also true. The 'hd0+', etc. line would be informative. Best of all, try to install the OpenBSD 5.0 snapshot. That's the most interesting (and soon to be locked) environment. Ken Regards, David
Azalia Intel 3400 HD Audio rev 0x05: apic 2 int 22 (irq 11)
I can get only noise from the audio of the Acer Aspire 5820T-6825 azalia. The kernel is OpenBSD uranio.dlg 4.9 GENERIC.MP#2 amd64 only modified for the alc0 driver to operate. As I have a compatible wireless usb there is no problem with the Broadcom not configured. But the sound is required and I can not get it to run. Do you have any help? dmesg, audio -a, mixerctl -av follow dmesg: - OpenBSD 4.9 (GENERIC.MP) #2: Sun Jul 17 09:40:29 BRT 2011 jso...@uranio.dlg:/usr/src/sys/arch/amd64/compile/GENERIC.MP RTC BIOS diagnostic error 80clock_battery real mem = 3008843776 (2869MB) avail mem = 2914725888 (2779MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe9460 (51 entries) bios0: vendor INSYDE version V1.23 date 12/21/2010 bios0: Acer Aspire 5820T acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP ASF! HPET APIC MCFG SLIC BOOT ASPT WDAT SSDT acpi0: wakeup devices EHC1(S3) EHC2(S3) PXSX(S4) RP01(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz, 2660.88 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG cpu0: 256KB 64b/line 8-way L2 cache cpu0: apic clock running at 133MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz, 2660.46 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG cpu1: 256KB 64b/line 8-way L2 cache cpu2 at mainbus0: apid 4 (application processor) cpu2: Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz, 2660.46 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG cpu2: 256KB 64b/line 8-way L2 cache cpu3 at mainbus0: apid 5 (application processor) cpu3: Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz, 2660.46 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG cpu3: 256KB 64b/line 8-way L2 cache ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 acpimcfg0 at acpi0 addr 0xf000, bus 0-127 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (P0P2) acpiprt2 at acpi0: bus 3 (P0P1) acpiprt3 at acpi0: bus 1 (RP01) acpiprt4 at acpi0: bus -1 (RP02) acpiprt5 at acpi0: bus -1 (RP03) acpiprt6 at acpi0: bus -1 (RP04) acpiprt7 at acpi0: bus -1 (RP05) acpiprt8 at acpi0: bus -1 (RP07) acpiprt9 at acpi0: bus -1 (RP08) acpiprt10 at acpi0: bus -1 (PEG3) acpiprt11 at acpi0: bus -1 (PEG5) acpiec0 at acpi0 acpicpu0 at acpi0: C3, C1, PSS acpicpu1 at acpi0: C3, C1, PSS acpicpu2 at acpi0: C3, C1, PSS acpicpu3 at acpi0: C3, C1, PSS acpitz0 at acpi0: critical temperature 105 degC acpibat0 at acpi0: BAT1 model AS10B3E serial 7F5A type LION oem SANYO acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: PWRB acpibtn1 at acpi0: LID0 acpibtn2 at acpi0: SLPB acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: LCD_ acpivideo1 at acpi0: VGA_ cpu0: Enhanced SpeedStep 2660 MHz: speeds: 2667, 2666, 2533, 2399, 2266, 2133, 1999, 1866, 1733, 1599, 1466, 1333, 1199 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 Intel Core Host rev 0x18 vga1 at pci0 dev 2 function 0 Intel Mobile HD graphics rev 0x18 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0xc000, size 0x1000 inteldrm0 at vga1: apic 2 int 16 (irq 7) drm0 at inteldrm0 Intel 3400 MEI rev 0x06 at pci0 dev 22 function 0 not configured ehci0 at pci0 dev 26 function 0 Intel 3400 USB rev 0x05: apic 2 int 16 (irq 7) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 Intel 3400 HD Audio rev 0x05: apic 2 int 22 (irq 11) azalia0: codecs: Realtek ALC269, Intel/0x2804, using Realtek ALC269 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 Intel 3400 PCIE rev 0x05: apic 2 int 17 (irq 255) pci1 at ppb0 bus 1 alc0 at pci1 dev 0 function 0 Attansic Technology L1D rev 0xc0: apic 2 int 16 (irq 7), address 60:eb:69:d8:e3:e3 atphy0 at alc0 phy 0: F1 10/100/1000 PHY, rev. 15 ppb1 at pci0 dev 28 function 5 Intel 3400 PCIE rev 0x05: apic 2 int 16 (irq 255) pci2 at ppb1 bus 2 Broadcom BCM43225 rev 0x01 at pci2 dev 0 function 0 not configured ehci1 at pci0 dev 29 function 0 Intel 3400 USB rev 0x05: apic 2 int 23
Re: Azalia Intel 3400 HD Audio rev 0x05: apic 2 int 22 (irq 11)
nice... talvez seja o codec.. Em 07/08/2011, `s 11:30, Jairo Souto escreveu: I can get only noise from the audio of the Acer Aspire 5820T-6825 azalia. The kernel is OpenBSD uranio.dlg 4.9 GENERIC.MP#2 amd64 only modified for the alc0 driver to operate. As I have a compatible wireless usb there is no problem with the Broadcom not configured. But the sound is required and I can not get it to run. Do you have any help? dmesg, audio -a, mixerctl -av follow dmesg: - OpenBSD 4.9 (GENERIC.MP) #2: Sun Jul 17 09:40:29 BRT 2011 jso...@uranio.dlg:/usr/src/sys/arch/amd64/compile/GENERIC.MP RTC BIOS diagnostic error 80clock_battery real mem = 3008843776 (2869MB) avail mem = 2914725888 (2779MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe9460 (51 entries) bios0: vendor INSYDE version V1.23 date 12/21/2010 bios0: Acer Aspire 5820T acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP ASF! HPET APIC MCFG SLIC BOOT ASPT WDAT SSDT acpi0: wakeup devices EHC1(S3) EHC2(S3) PXSX(S4) RP01(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz, 2660.88 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3 ,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG cpu0: 256KB 64b/line 8-way L2 cache cpu0: apic clock running at 133MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz, 2660.46 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3 ,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG cpu1: 256KB 64b/line 8-way L2 cache cpu2 at mainbus0: apid 4 (application processor) cpu2: Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz, 2660.46 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3 ,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG cpu2: 256KB 64b/line 8-way L2 cache cpu3 at mainbus0: apid 5 (application processor) cpu3: Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz, 2660.46 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3 ,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG cpu3: 256KB 64b/line 8-way L2 cache ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 acpimcfg0 at acpi0 addr 0xf000, bus 0-127 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (P0P2) acpiprt2 at acpi0: bus 3 (P0P1) acpiprt3 at acpi0: bus 1 (RP01) acpiprt4 at acpi0: bus -1 (RP02) acpiprt5 at acpi0: bus -1 (RP03) acpiprt6 at acpi0: bus -1 (RP04) acpiprt7 at acpi0: bus -1 (RP05) acpiprt8 at acpi0: bus -1 (RP07) acpiprt9 at acpi0: bus -1 (RP08) acpiprt10 at acpi0: bus -1 (PEG3) acpiprt11 at acpi0: bus -1 (PEG5) acpiec0 at acpi0 acpicpu0 at acpi0: C3, C1, PSS acpicpu1 at acpi0: C3, C1, PSS acpicpu2 at acpi0: C3, C1, PSS acpicpu3 at acpi0: C3, C1, PSS acpitz0 at acpi0: critical temperature 105 degC acpibat0 at acpi0: BAT1 model AS10B3E serial 7F5A type LION oem SANYO acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: PWRB acpibtn1 at acpi0: LID0 acpibtn2 at acpi0: SLPB acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: LCD_ acpivideo1 at acpi0: VGA_ cpu0: Enhanced SpeedStep 2660 MHz: speeds: 2667, 2666, 2533, 2399, 2266, 2133, 1999, 1866, 1733, 1599, 1466, 1333, 1199 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 Intel Core Host rev 0x18 vga1 at pci0 dev 2 function 0 Intel Mobile HD graphics rev 0x18 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) intagp0 at vga1 agp0 at intagp0: aperture at 0xc000, size 0x1000 inteldrm0 at vga1: apic 2 int 16 (irq 7) drm0 at inteldrm0 Intel 3400 MEI rev 0x06 at pci0 dev 22 function 0 not configured ehci0 at pci0 dev 26 function 0 Intel 3400 USB rev 0x05: apic 2 int 16 (irq 7) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 Intel EHCI root hub rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 Intel 3400 HD Audio rev 0x05: apic 2 int 22 (irq 11) azalia0: codecs: Realtek ALC269, Intel/0x2804, using Realtek ALC269 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 Intel 3400 PCIE rev 0x05: apic 2 int 17 (irq 255) pci1 at ppb0 bus 1 alc0 at pci1 dev 0 function 0 Attansic Technology L1D rev 0xc0: apic 2 int 16 (irq 7), address 60:eb:69:d8:e3:e3 atphy0 at alc0 phy 0: F1 10/100/1000 PHY, rev. 15 ppb1 at pci0 dev 28 function 5 Intel 3400 PCIE rev 0x05: apic 2 int 16
Re: Azalia Intel 3400 HD Audio rev 0x05: apic 2 int 22 (irq 11)
jakemsr sent this which fixed the problem on 6SERIES and is documented on datasheets of these other chipsets as well: Index: azalia.c === RCS file: /cvs/src/sys/dev/pci/azalia.c,v retrieving revision 1.198 diff -u -r1.198 azalia.c --- azalia.c3 Jul 2011 15:47:16 - 1.198 +++ azalia.c7 Aug 2011 16:46:21 - @@ -448,6 +448,17 @@ } break; + + case PCI_PRODUCT_INTEL_6SERIES_HDA: + case PCI_PRODUCT_INTEL_3400_HDA: + case PCI_PRODUCT_INTEL_QS57_HDA: + reg = azalia_pci_read(az-pc, az-tag, 0x79); + azalia_pci_write(az-pc, az-tag, 0x79, reg ~0x08); + reg = azalia_pci_read(az-pc, az-tag, 0x79); + if (reg 0x08) + printf(: could not enable PCIe cache snooping\n); + break; + } } Jairo Souto [jairo.so...@holdinggem.com.br] wrote: I can get only noise from the audio of the Acer Aspire 5820T-6825 azalia. The kernel is OpenBSD uranio.dlg 4.9 GENERIC.MP#2 amd64 only modified for the alc0 driver to operate. As I have a compatible wireless usb there is no problem with the Broadcom not configured. But the sound is required and I can not get it to run. Do you have any help? dmesg, audio -a, mixerctl -av follow dmesg: - OpenBSD 4.9 (GENERIC.MP) #2: Sun Jul 17 09:40:29 BRT 2011 jso...@uranio.dlg:/usr/src/sys/arch/amd64/compile/GENERIC.MP RTC BIOS diagnostic error 80clock_battery real mem = 3008843776 (2869MB) avail mem = 2914725888 (2779MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe9460 (51 entries) bios0: vendor INSYDE version V1.23 date 12/21/2010 bios0: Acer Aspire 5820T acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP ASF! HPET APIC MCFG SLIC BOOT ASPT WDAT SSDT acpi0: wakeup devices EHC1(S3) EHC2(S3) PXSX(S4) RP01(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz, 2660.88 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG cpu0: 256KB 64b/line 8-way L2 cache cpu0: apic clock running at 133MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz, 2660.46 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG cpu1: 256KB 64b/line 8-way L2 cache cpu2 at mainbus0: apid 4 (application processor) cpu2: Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz, 2660.46 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG cpu2: 256KB 64b/line 8-way L2 cache cpu3 at mainbus0: apid 5 (application processor) cpu3: Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz, 2660.46 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG cpu3: 256KB 64b/line 8-way L2 cache ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 acpimcfg0 at acpi0 addr 0xf000, bus 0-127 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (P0P2) acpiprt2 at acpi0: bus 3 (P0P1) acpiprt3 at acpi0: bus 1 (RP01) acpiprt4 at acpi0: bus -1 (RP02) acpiprt5 at acpi0: bus -1 (RP03) acpiprt6 at acpi0: bus -1 (RP04) acpiprt7 at acpi0: bus -1 (RP05) acpiprt8 at acpi0: bus -1 (RP07) acpiprt9 at acpi0: bus -1 (RP08) acpiprt10 at acpi0: bus -1 (PEG3) acpiprt11 at acpi0: bus -1 (PEG5) acpiec0 at acpi0 acpicpu0 at acpi0: C3, C1, PSS acpicpu1 at acpi0: C3, C1, PSS acpicpu2 at acpi0: C3, C1, PSS acpicpu3 at acpi0: C3, C1, PSS acpitz0 at acpi0: critical temperature 105 degC acpibat0 at acpi0: BAT1 model AS10B3E serial 7F5A type LION oem SANYO acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: PWRB acpibtn1 at acpi0: LID0 acpibtn2 at acpi0: SLPB acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: LCD_ acpivideo1 at acpi0: VGA_ cpu0: Enhanced SpeedStep 2660 MHz: speeds: 2667, 2666, 2533, 2399, 2266, 2133, 1999, 1866, 1733, 1599, 1466, 1333, 1199 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 Intel Core Host rev 0x18 vga1 at pci0 dev 2 function 0 Intel Mobile HD graphics rev 0x18 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25,
VII Ateneo 2011 - Síndrome de Fatiga Crónica
Escuela Sistimica Argentina Institucisn dedicada a la formacisn, asistencia e investigacisn psicolsgica. Hoy nos acercamos a Uds. para invitarlos a la realizacisn del VII Ateneo 2011 SINDROME DE FATIGA CRONICA (SFC). Estoy cansada todo el dma... Me angustia no poder hacer las cosas. Mi familia no aguanta mas mis quejas y no me cree. Quiero, pero el cuerpo no me sigue. Por mas que duerma, me levanto cansada y dolorida. La memoria me falla. Ya no soy yo. Me duele el cuerpo. Los resultados de los analisis son normales y los midicos me dicen que no tengo nada. Me dijeron que puede ser depresisn y me mandaron a hacer psicoterapia Estas son las palabras con las que el paciente intenta describir qui le pasa y que sufre de Smndrome de Fatiga Crsnica (SFC). Son absolutamente inespecmficas y pueden corresponderse con muchas enfermedades. El desconocimiento de la existencia de estas enfermedades lleva al peregrinaje de estos pacientes por varios consultorios de diferentes midicos especialistas y a realizar distintos tipos de psicoterapias por mas de diez aqos (Beretta P y col., Paris 2009) sin encontrar un correcto diagnsstico ni una solucisn. La difusisn del conocimiento de estas enfermedades puede reducir el tiempo y los costos de tratamiento para los pacientes y evitar complicaciones irreversibles en muchos casos. Saber de su existencia en la practica asistencial cotidiana evita diagnssticos incorrectos y por lo tanto tratamientos midicos y psicolsgicos infructosos. Venm al ateneo del viernes y enterate. Coordina: DR. Pablo BERETTA Midico Especialista en Psiquiatrma, Anatomma Patolsgica y Medicina Aeronautica. Presidente de la Seccisn de Fibromialgia, Fatiga Crsnica y enfermedades relacionadas en Psiquiatrma. Asociacisn Argentina de Psiquiatras (AAP). Fundador de PHI: Instituto de Asistencia, Investigacisn y Docencia de Fibromialgia, Fatiga Crsnica y enfermedades relacionadas. Vicedirector de IPBI: Instituto de Psiquiatrma Biolsgica Integral. Dma: viernes 12 de Agosto de 2011 Horario: 19 horas ENTRADA LIBRE Y GRATUITA (Sin inscripcisn previa) ESCUELA SISTIMICA ARGENTINA Fray J. S. M. Oro 1843 (C1414DBC) Cap. Fed. Tel/ Fax: 4774-2875/6112 - 4899-1053 i...@escuelasistemica.com.ar / www.escuelasistemica.com.ar
Re: hibernation with APM
On Sun, Aug 07, 2011, David Vasek wrote: Hi Marco. Thanks, but I'm not asking about suspend. apmd -z starts suspend, at least with my Thinkpad and Compaq, both with Phoenix APM BIOSes. Hibernation is sometimes called save to disk suspend, while suspend is then called save to RAM suspend. If you have a BIOS option to change suspend to hibernate, it will work, otherwise out of luck. Regards, David On Sat, 6 Aug 2011, Marco Peereboom wrote: run apmd at startup then type apm -z to initiate it. Works like a charm on most laptops of quality. On Sun, Aug 07, 2011 at 12:54:22AM +0200, David Vasek wrote: Hello all, does anybody please know if there is a way to initiate hibernation on APM equipped laptops that support it *from software*? Thanks for answers. Regards, David
Re: hibernation with APM
On 7 August 2011 22:35, Ted Unangst t...@tedunangst.com wrote: If you have a BIOS option to change suspend to hibernate, it will work, otherwise out of luck. This is semi-OT, but how does that work, actually? I mean, I know how suspend to disk works in principle, but if it's done purely from the BIOS, wouldn't the BIOS need to know about (and use) a special partition to store the RAM contents? Otherwise, how would the BIOS know where to store the RAM contents in the absence of OS involvement? regards, --ropers
Re: installing OpenBSD 4.9 to external USB harddisk: Disk does not boot
hi, On 7 August 2011 15:24, Kenneth R Westerback kwesterb...@rogers.com wrote: On Sun, Aug 07, 2011 at 02:01:44PM +0200, David Vasek wrote: On Sun, 7 Aug 2011, Michael Treibton wrote: If there's a means of providing more information to help with this, please say. I guess the devs would like to see the output from OpenBSD fdisk(8) and disklabel(8), rather than from Linux. You can obtain those by selecting the (S)hell in the install program and using the commands above. Yes, we would. :-). All the normal information (e.g. dmesg) and a serial capture of the install process so we can see exactly what the installer was saying and was told. is there a cleverer way of doing this? i just do not have the infrastructure here to attempt a serial capture, despite the well-documented instructions in the OBSD docs. i can get the output you want, although because the installer doesn't have scp or anything, i have no means of copying these files. is there another means at my disposal to get these files off? Kindly, Michael
Re: hibernation with APM
This is semi-OT, but how does that work, actually? I mean, I know how suspend to disk works in principle, but if it's done purely from the BIOS, wouldn't the BIOS need to know about (and use) a special partition to store the RAM contents? Otherwise, how would the BIOS know where to store the RAM contents in the absence of OS involvement? on at least older thinkpads, it would swap to an msdos partition that had a specially-formatted save2dsk.bin file. tphdisk in the ports tree can be used for that.
Re: installing OpenBSD 4.9 to external USB harddisk: Disk does not boot
This is a long shot, but could this be related to the USB drive not having settled in soon enough? I'm assuming your USB drive has an external power supply, right? It is a know problem with some external self-powered USB drives and USB-to-SATA/IDE adapters that some of these can start acting up if they're plugged in as soon as they have power. Many of these iffy or inferior drives/adapters will work just fine if you first plug in their external power supply, then wait for a few seconds, or maybe even a minute or so, and then and only then plug their USB cable into the actual computer. But give the computer an opportunity to try mounting them before these iffy USB devices have had the time to get their act together and they will misbehave and malfunction in all kinds of weird and wonderful ways. If you give your drive the chance to settle in first, does that allow you to work with the drive properly (i.e. does it allow you to properly install an OS on the USB drive and/or boot from it)? Let it settle in first, and then try booting, powering up the PC only after the USB drive has had time to get its shit together. If that doesn't work, try letting the USB drive settile in first, and then reinstall OpenBSD on it, and then try booting from it (again with time to settle in). Let us know if this helps or if this was a complete red herring. regards, --ropers On 7 August 2011 12:32, Michael Treibton mtreib...@googlemail.com wrote: Hi all, i'm attempting to diagnose if there was a problem with installing OpenBSD to an external USB hard disk or not. The disk is a Western Digital 2TB disk, should it matter. Needless to say, the install went fine on to the disk; all the sets were unpacked, and I rebooted the machine as per the instructions at the end. During install, I let the installer auto partition the disk in question, and that ended up creating a sensible layout that i could tell. Yet, when i reboot the machine, and ask the BIOS to boot from the external usb disk, eventually nothing happens, and my machine then defaults to booting off my internal disk. What could be causing this? i've had other operating systems on this external USB disk in the past, so I know it's perfectly capable of being detected correctly by the BIOS. Since though I can't get at the disk in question, I am unsure what information I can gather for you -- under Linux using cfdisk, the best information I can gather is the following: Number Flags Part Type FilesystemLabel Size -- Pri/Ext Free space 0.00MB 4 Bootable Primary sun-ufs 2000396MB And: Partition info -- Possible partition device: /dev/sdb4 Partition type: Primary Partition size in bytes: 2000396288512B Partition size in sectors: 3907024001s Portion of the hard disk: 100% Filesystem type: sun-ufs System type: 0xa6 System type name: OpenBSD Position: 64s-3907024064s Start (cyl,heads,sector): 0,1,1 End (cyl,heads,sector): 243200,254,62 Flags: boot If there's a means of providing more information to help with this, please say. TIA for any help. Kindly, Michael
Re: Azalia Intel 3400 HD Audio rev 0x05: apic 2 int 22 (irq 11)
It did not work. The bsd.mp from the current snapshot (today) did not work also :( --Jairo Souto (38)8816-1254 On Sun, Aug 07, 2011 at 09:59:29AM -0700, Chris Cappuccio wrote: jakemsr sent this which fixed the problem on 6SERIES and is documented on datasheets of these other chipsets as well: Index: azalia.c === RCS file: /cvs/src/sys/dev/pci/azalia.c,v retrieving revision 1.198 diff -u -r1.198 azalia.c --- azalia.c3 Jul 2011 15:47:16 - 1.198 +++ azalia.c7 Aug 2011 16:46:21 - @@ -448,6 +448,17 @@ } break; + + case PCI_PRODUCT_INTEL_6SERIES_HDA: + case PCI_PRODUCT_INTEL_3400_HDA: + case PCI_PRODUCT_INTEL_QS57_HDA: + reg = azalia_pci_read(az-pc, az-tag, 0x79); + azalia_pci_write(az-pc, az-tag, 0x79, reg ~0x08); + reg = azalia_pci_read(az-pc, az-tag, 0x79); + if (reg 0x08) + printf(: could not enable PCIe cache snooping\n); + break; + } } Jairo Souto [jairo.so...@holdinggem.com.br] wrote: I can get only noise from the audio of the Acer Aspire 5820T-6825 azalia. The kernel is OpenBSD uranio.dlg 4.9 GENERIC.MP#2 amd64 only modified for the alc0 driver to operate. As I have a compatible wireless usb there is no problem with the Broadcom not configured. But the sound is required and I can not get it to run. Do you have any help? dmesg, audio -a, mixerctl -av follow dmesg: - OpenBSD 4.9 (GENERIC.MP) #2: Sun Jul 17 09:40:29 BRT 2011 jso...@uranio.dlg:/usr/src/sys/arch/amd64/compile/GENERIC.MP RTC BIOS diagnostic error 80clock_battery real mem = 3008843776 (2869MB) avail mem = 2914725888 (2779MB) mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe9460 (51 entries) bios0: vendor INSYDE version V1.23 date 12/21/2010 bios0: Acer Aspire 5820T acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP ASF! HPET APIC MCFG SLIC BOOT ASPT WDAT SSDT acpi0: wakeup devices EHC1(S3) EHC2(S3) PXSX(S4) RP01(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) PXSX(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz, 2660.88 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG cpu0: 256KB 64b/line 8-way L2 cache cpu0: apic clock running at 133MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz, 2660.46 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG cpu1: 256KB 64b/line 8-way L2 cache cpu2 at mainbus0: apid 4 (application processor) cpu2: Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz, 2660.46 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG cpu2: 256KB 64b/line 8-way L2 cache cpu3 at mainbus0: apid 5 (application processor) cpu3: Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz, 2660.46 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,POPCNT,NXE,LONG cpu3: 256KB 64b/line 8-way L2 cache ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 acpimcfg0 at acpi0 addr 0xf000, bus 0-127 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (P0P2) acpiprt2 at acpi0: bus 3 (P0P1) acpiprt3 at acpi0: bus 1 (RP01) acpiprt4 at acpi0: bus -1 (RP02) acpiprt5 at acpi0: bus -1 (RP03) acpiprt6 at acpi0: bus -1 (RP04) acpiprt7 at acpi0: bus -1 (RP05) acpiprt8 at acpi0: bus -1 (RP07) acpiprt9 at acpi0: bus -1 (RP08) acpiprt10 at acpi0: bus -1 (PEG3) acpiprt11 at acpi0: bus -1 (PEG5) acpiec0 at acpi0 acpicpu0 at acpi0: C3, C1, PSS acpicpu1 at acpi0: C3, C1, PSS acpicpu2 at acpi0: C3, C1, PSS acpicpu3 at acpi0: C3, C1, PSS acpitz0 at acpi0: critical temperature 105 degC acpibat0 at acpi0: BAT1 model AS10B3E serial 7F5A type LION oem SANYO acpiac0 at acpi0: AC unit online acpibtn0 at acpi0: PWRB acpibtn1 at acpi0: LID0 acpibtn2 at acpi0: SLPB acpivideo0 at acpi0: GFX0 acpivout0 at acpivideo0: LCD_ acpivideo1 at acpi0: VGA_ cpu0: Enhanced SpeedStep 2660 MHz: speeds: 2667, 2666, 2533, 2399, 2266, 2133, 1999, 1866, 1733, 1599,
Re: installing OpenBSD 4.9 to external USB harddisk: Disk does not boot
On Sun, Aug 7, 2011 at 18:14, Michael Treibton mtreib...@googlemail.com wrote: snipped... is there a cleverer way of doing this? B i just do not have the infrastructure here to attempt a serial capture, despite the well-documented instructions in the OBSD docs. B i can get the output you want, although because the installer doesn't have scp or anything, i have no means of copying these files. I have gone as far as taking physical pictures of the screen with the ps, trace, and dmesg on it, then posted the pictures to picasa or someplace like that, so they could be viewable by everyone. It's not perfect, but laptops don't have a serial capture (at least, Dell's don't). You can use a camera phone, or if you are desperate, a camera...
Re: amd64 snapshot kqemu hangs
On 7 August 2011 01:06, Philip Guenther guent...@gmail.com wrote: You see that ddb{1} prompt that I'm quoting from *your* original email? That's the prompt of the built-in kernel debugger. It even has a manpage: try man ddb on a running system. Is there a particular reason why the ddb man page doesn't also exist on the web? http://www.openbsd.org/cgi-bin/man.cgi?query=+ddb
Re: amd64 snapshot kqemu hangs
On Sun, Aug 7, 2011 at 6:46 PM, ropers rop...@gmail.com wrote: On 7 August 2011 01:06, Philip Guenther guent...@gmail.com wrote: You see that ddb{1} prompt that I'm quoting from *your* original email? That's the prompt of the built-in kernel debugger. It even has a manpage: try man ddb on a running system. Is there a particular reason why the ddb man page doesn't also exist on the web? http://www.openbsd.org/cgi-bin/man.cgi?query=+ddb Did you insert the '+' in there to test whether people can read URLs? http://www.openbsd.org/cgi-bin/man.cgi?query=ddb Philip Guenther
Re: amd64 snapshot kqemu hangs
On 08/07/11 21:46, ropers wrote: On 7 August 2011 01:06, Philip Guenther guent...@gmail.com wrote: You see that ddb{1} prompt that I'm quoting from *your* original email? That's the prompt of the built-in kernel debugger. It even has a manpage: try man ddb on a running system. Is there a particular reason why the ddb man page doesn't also exist on the web? http://www.openbsd.org/cgi-bin/man.cgi?query=+ddb http://www.openbsd.org/cgi-bin/man.cgi?query=ddb No leading + char? Works for me... Nick.
Re: amd64 snapshot kqemu hangs
On 8 August 2011 03:54, Philip Guenther guent...@gmail.com wrote: On Sun, Aug 7, 2011 at 6:46 PM, ropers rop...@gmail.com wrote: On 7 August 2011 01:06, Philip Guenther guent...@gmail.com wrote: You see that ddb{1} prompt that I'm quoting from *your* original email? That's the prompt of the built-in kernel debugger. It even has a manpage: try man ddb on a running system. Is there a particular reason why the ddb man page doesn't also exist on the web? http://www.openbsd.org/cgi-bin/man.cgi?query=+ddb Did you insert the '+' in there to test whether people can read URLs? http://www.openbsd.org/cgi-bin/man.cgi?query=ddb Ah. No. I see. What happened there was that I inadvertently entered ddb into the search field rather than ddb and the space was converted to a +. Should that input field be made to tolerate/strip extraneous spaces? I don't know, and since I'm not qualified to do the work, I won't express an opinion here. But thanks anyway. :) --ropers
Re: installing OpenBSD 4.9 to external USB harddisk: Disk does not boot
On 08/07/11 07:30, Michael Treibton wrote: hi, On 7 August 2011 12:19, Francois Pussault fpussa...@contactoffice.fr wrote: hi, all, This should be an hardware issue, I've used an usb external drive with success. whith a dell A6 or A7 version of Dell bios, boot usb enabled, with a (double-usb) eternal drive, using BSD4.2 filesystem. so maybe you need a bios upgrade or a double-usb-drive to be able to boot or to use BSD4.2 fs on / ? i'd agree with you if it wasn't for the fact that NetBSD has been on this drive at some point, and has booted from it just fine, unfortunately only OpenBSD seems to suffer being able to work off this drive. I'm wondering if it's down to how the other BSDs partition the disk? it's entirely possible other OSes gave a small partition for /boot which the bios could pick up on? that being the case, is that easy to do at install time? i'll have to read the docs i suppose, assuming its even a good idea. But bios upgrade? No, i really can't see how that's correct given evidence to the contrary. Thanks, Michael It really boils down to either: 1) your BIOS is brain damaged and can't boot OpenBSD from an external HD. Your evidence in no way convinces me that's not true. I've seen machines that claimed to be able to boot from a USB device (Dell D610 laptop), but couldn't from an OpenBSD flash drive that booted Just Fine on a much lower priced machine from a manufacturer with a very poor reputation for quality and support (Acer Aspire One). BIOS update didn't help in my case. 2) Something went wrong with your install process. All kinds of options there -- no MBR code loaded, PBR didn't install properly, etc. No promises that both isn't the answer. This works, I've been installing OpenBSD on USB drives and flash devices for a long time. There's a flash drive sitting on my keyboard right now, 2G total, 1.5G OpenBSD, 0.5G FAT. Won't work on the above mentioned Dell D610, but works on almost everything else. Look at this: http://www.openbsd.org/faq/faq14.html#Boot386 there's all kinds of info about what happens and how the boot process works. If you don't get the Using drive 0, partition 3. message, your MBR is screwed up. If you don't get the Loading message, the PBR is screwed up. In either case, the BIOS could be at fault (MBR can't say hi if it isn't being loaded and run). Nick.
Re: installing OpenBSD 4.9 to external USB harddisk: Disk does not boot
On Mon, Aug 08, 2011, Michael Treibton wrote: is there a cleverer way of doing this? i just do not have the infrastructure here to attempt a serial capture, despite the well-documented instructions in the OBSD docs. i can get the output you want, although because the installer doesn't have scp or anything, i have no means of copying these files. is there another means at my disposal to get these files off? You booted the installer somehow, right? Boot from that disk to the boot prompt, then boot hd1:/bsd or hd0:/bsd or something as appropriate.
Re: installing OpenBSD 4.9 to external USB harddisk: Disk does not boot
I'm assuming your USB drive has an external power supply, right? In the past, I had installed OpenBSD (I think it was 4.7, either i386 or amd64) to an external usb drive, powered from the usb port. It would appear to install ok, start the boot process, then about halfway through would appear to power cycle or something for a split second, causing the boot to fail. Same thing would happen with FreeBSD and Slackware, though Ubuntu and Fedora could successfully boot from that drive. Now that this topic has come up on the lists, I am just wondering are there some non-externally powered usb drives that OpenBSD can boot from? Would be helpful to run and test -current on external drive, and have the release version on internal drive. Cheers, Brett.
Votre carte bancaire est suspendue
[IMAGE] Bonjour clients de visa carte, Votre carte bancaire est suspendue, parce que nous avons rencontre un probleme sur votre diagramme. Nous avons determine qu'une personne doit peut-etre utiliser votre diagramme sans votre autorisation. Pour votre protection, nous avons suspendu votre compte bancaire a travers votre carte de credit. Pour soulever cette suspension, Cliquer ici et suivre le procede indique pour mettre a jour votre compte par la carte de credit. Note : Si ce n'est pas accomplit,nous serons contraints de suspendre votre diagramme indefiniment, parce qu'elle peut etre utilise pour frauduleux. Nous vous remercions de votre cooperation dans le cadre de ce dossier. Merci, Service a la clientele de soutien. Copyright 2010-2011 Verifier by Visa . Tous droits reserves.
Re: installing OpenBSD 4.9 to external USB harddisk: Disk does not boot
On Sun, Aug 7, 2011 at 11:25 PM, Brett brett.ma...@gmx.com wrote: I'm assuming your USB drive has an external power supply, right? In the past, I had installed OpenBSD (I think it was 4.7, either i386 or amd64) to an external usb drive, powered from the usb port. It would appear to install ok, start the boot process, then about halfway through would appear to power cycle or something for a split second, causing the boot to fail. Same thing would happen with FreeBSD and Slackware, though Ubuntu and Fedora could successfully boot from that drive. Now that this topic has come up on the lists, I am just wondering are there some non-externally powered usb drives that OpenBSD can boot from? Would be helpful to run and test -current on external drive, and have the release version on internal drive. Besides flash drives, which are trivially available in 8 Gig size at your local supermarket?
Re: WiFI and VGA issues with Dell E6320 + suspend/resume and em0
Hi again, apm works fine except of apm -z and/or zzz command, it will suspend, but it's not able to resume. em0 interface doesn't work in bsd.rd (watchdog timeout) . On normal system it's fine. On Tue, Aug 2, 2011 at 12:34 PM, Tomas Bodzar tomas.bod...@gmail.com wrote: Hi all, here are some issues with current on new Dell E6320 (dmesg on the end of email including those weird characters is real including missing chars from starts). Can test some stuff or send more info in case of need. 1. Wifi firmware installed, but I can't see networks during scan and driver throws errors in dmesg Aug B 2 12:19:22 B /bsd: firmware error log: Aug B 2 12:19:22 B /bsd: B error type B B B = UNKNOWN (0x13AA) Aug B 2 12:19:22 B /bsd: B program counter = 0x00013FB0 Aug B 2 12:19:22 B /bsd: B source line B B = 0x00E0 Aug B 2 12:19:22 B /bsd: B error data B B B = 0x Aug B 2 12:19:22 B /bsd: B branch link B B = 0x00013ED200013ED2 Aug B 2 12:19:22 B /bsd: B interrupt link B = 0xD252 Aug B 2 12:19:22 B /bsd: B time B B B B B B = 458 Aug B 2 12:19:22 B /bsd: driver status: Aug B 2 12:19:22 B /bsd: B tx ring B 0: qid=0 B cur=0 B queued=0 Aug B 2 12:19:22 B /bsd: B tx ring B 1: qid=1 B cur=0 B queued=0 Aug B 2 12:19:22 B /bsd: B tx ring B 2: qid=2 B cur=0 B queued=0 Aug B 2 12:19:22 B /bsd: B tx ring B 3: qid=3 B cur=0 B queued=0 Aug B 2 12:19:22 B /bsd: B tx ring B 4: qid=4 B cur=9 B queued=0 Aug B 2 12:19:22 B /bsd: B tx ring B 5: qid=5 B cur=0 B queued=0 Aug B 2 12:19:22 B /bsd: B tx ring B 6: qid=6 B cur=0 B queued=0 Aug B 2 12:19:22 B /bsd: B tx ring B 7: qid=7 B cur=0 B queued=0 Aug B 2 12:19:22 B /bsd: B tx ring B 8: qid=8 B cur=0 B queued=0 Aug B 2 12:19:22 B /bsd: B tx ring B 9: qid=9 B cur=0 B queued=0 Aug B 2 12:19:22 B /bsd: B tx ring 10: qid=10 cur=0 B queued=0 Aug B 2 12:19:22 B /bsd: B tx ring 11: qid=11 cur=0 B queued=0 Aug B 2 12:19:22 B /bsd: B tx ring 12: qid=12 cur=0 B queued=0 Aug B 2 12:19:22 B /bsd: B tx ring 13: qid=13 cur=0 B queued=0 Aug B 2 12:19:22 B /bsd: B tx ring 14: qid=14 cur=0 B queued=0 Aug B 2 12:19:22 B /bsd: B tx ring 15: qid=15 cur=0 B queued=0 Aug B 2 12:19:22 B /bsd: B tx ring 16: qid=16 cur=0 B queued=0 Aug B 2 12:19:22 B /bsd: B tx ring 17: qid=17 cur=0 B queued=0 Aug B 2 12:19:22 B /bsd: B tx ring 18: qid=18 cur=0 B queued=0 Aug B 2 12:19:22 B /bsd: B tx ring 19: qid=19 cur=0 B queued=0 Aug B 2 12:19:22 B /bsd: B rx ring: cur=10 Aug B 2 12:19:22 B /bsd: B 802.11 state 0 Aug B 2 12:19:23 B /bsd: iwn0: RXON command failed Aug B 2 12:19:23 B /bsd: iwn0: could not configure device $ sudo ifconfig iwn0 up $ sudo ifconfig iwn0 scan iwn0: flags=8802BROADCAST,SIMPLEX,MULTICAST mtu 1500 B B B B lladdr a0:88:b4:72:f0:70 B B B B priority: 4 B B B B groups: wlan B B B B media: IEEE802.11 autoselect B B B B status: no network B B B B ieee80211: nwid $ $ sudo ifconfig iw$ pkg_info | grep -i iwn iwn-firmware-5.6 B B Firmware binary images for iwn driver $ 2. VGA Probably just too much new HW. Resolution is fine, but speed of screen is quite slow, but usable. $ glxgears 38 frames in 5.1 seconds = B 7.415 FPS 37 frames in 5.0 seconds = B 7.353 FPS 35 frames in 5.0 seconds = B 6.994 FPS ^C $ glxinfo | grep -i render direct rendering: Yes OpenGL renderer string: Software Rasterizer B B GL_NV_conditional_render, GL_NV_depth_clamp, GL_NV_fragment_program, $ $ sudo pcidump -v 0:2:0 B 0:2:0: Intel GT2+ Video B B B B 0x: Vendor ID: 8086 Product ID: 0126 B B B B 0x0004: Command: 0007 Status ID: 0090 B B B B 0x0008: Class: 03 Subclass: 00 Interface: 00 Revision: 09 B B B B 0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00 B B B B 0x0010: BAR mem 64bit addr: 0xe140/0x0040 B B B B 0x0018: BAR mem prefetchable 64bit addr: 0xd000/0x1000 B B B B 0x0020: BAR io addr: 0x4000/0x0040 B B B B 0x0024: BAR empty () B B B B 0x0028: Cardbus CIS: B B B B 0x002c: Subsystem Vendor ID: 1028 Product ID: 0492 B B B B 0x0030: Expansion ROM Base Address: B B B B 0x0038: B B B B 0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00 B B B B 0x0090: Capability 0x05: Message Signaled Interrupts (MSI) B B B B 0x00d0: Capability 0x01: Power Management B B B B 0x00a4: Capability 0x13: PCI Advanced Features $ ERIC.MP) #29: Sat Jul 30 17:06:22 MDT 2011 B B dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP RTC BIOS diagnostic error 3fconfig_unit,memory_size,fixed_di\^A,invalptal\M-h\M^@ cpu0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz (GenuineIntel 686-class) 2.50 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,SMX,ES
Re: installing OpenBSD 4.9 to external USB harddisk: Disk does not boot
On 08/07/11 22:48, Brett wrote: On 08/07/11 22:17, Nico Kadel-Garcia wrote: On Sun, Aug 7, 2011 at 11:25 PM, Brettbrett.ma...@gmx.com wrote: I'm assuming your USB drive has an external power supply, right? In the past, I had installed OpenBSD (I think it was 4.7, either i386 or amd64) to an external usb drive, powered from the usb port. It would appear to install ok, start the boot process, then about halfway through would appear to power cycle or something for a split second, causing the boot to fail. Same thing would happen with FreeBSD and Slackware, though Ubuntu and Fedora could successfully boot from that drive. Now that this topic has come up on the lists, I am just wondering are there some non-externally powered usb drives that OpenBSD can boot from? Would be helpful to run and test -current on external drive, and have the release version on internal drive. Besides flash drives, which are trivially available in 8 Gig size at your local supermarket? Yes, besides those, since I prefer the 300gb size of hard drives :-)