Re: wireless ethernet (ralink) not working
Hi, On 03/23/13 00:58, Ted Unangst wrote: On Fri, Mar 22, 2013 at 23:59, Riccardo Mottola wrote: I thus configure ifconfig ral0 nwkey nwid , where is yyy is the network id I know and which was also found by the scan. I see the lights go up on the card. If you're trying to use WPA, you should use wpakey . If you really are trying to use WEP, you really shouldn't. Yes, it is WEP and WEP should work exactly as an unencrypted network should work. It might be that I am trying to connect to networks of which I am not the admin? Riccardo
Re: wireless ethernet (ralink) not working
It might be that I am trying to connect to networks of which I am not the admin? Riccardo No, it is the fact that you are using 'nwkey' instead of 'wpakey', a common mistake I was plagued with. Try the command 'man ral' and you will see some examples.
Re: Absolute OpenBSD 2nd Edition pre-orders are up.
http://marc.info/?l=openbsd-miscm=105723966516199w=2 I like the 'a moose with uncontrolled diabetes' and 'UPS' Kidney Transplant Express' parts. Is there any chance for you to start non-technical writting or 'Dilbert style' cartoons? If so, that will be really interesting to read. Thanks.
Re: dzen2 with cwm
[- Fri 22.Mar'13 at 21:06:43 + Stuart Henderson :-] On 2013-03-22, Alexander Polakov p...@sdf.org wrote: * James Griffin j...@kontrol.kode5.net [130322 15:10]: I was wondering if anyone uses dzen2 with OpenBSD (-current). If so I'd be really interested to see some examples of setups and scripts. I'd like to be able to see network activity, mailbox updates/status and a few other items of interest. Nothing too complex. You may be probably interested in sysutils/xstatbar (nice graphs) or x11/xmobar (all included) if you're too lazy to write monitoring scripts by yorself. Or just pipe sysutils/conky output to dzen2. I used to do exactly this (pipe conky output through dzen2), then switched to xstatbar. Cheers Stuart/Alexander - conky \w dzen2 or xstatbar seems worth a go. No doubt i'll probably just uninstall them after a while. Afterall, I can get info from the commandline and also use tmux to show some stats. Just playing around with cwm really, so maybe i've too much time on my hands :-) . I'd probably be better off using the time to help in some with the project, like writing docs - i'm pretty good at that. Cheers for all replies and links etc. Jamie. -- James Griffin: jmz at kontrol.kode5.net jmzgriffin at gmail.com A4B9 E875 A18C 6E11 F46D B788 BEE6 1251 1D31 DC38
Atom D2550 (cedarview) working now with kms?
Hi, Now that the KMS stuff has arrived (thanks for that!), I'm looking at this device from Shuttle http://axcco.com/xs35v3.html. It has an Atom D2550 with Intel GMA 3650 Graphic engine, should it work as well as the Pineview series Atoms do in displaying Xvideo output? Also the audio chipset is an Intel IDT92HD81, should it work with azalia(4)? I've been searching on the net for some answers to these questions, but could not find any. Cheers, Brett.
Re: Atom D2550 (cedarview) working now with kms?
On Sun, Mar 24, 2013 at 12:39:26AM +1100, Brett Mahar wrote: Hi, Now that the KMS stuff has arrived (thanks for that!), I'm looking at this device from Shuttle http://axcco.com/xs35v3.html. It has an Atom D2550 with Intel GMA 3650 Graphic engine, should it work as well as the Pineview series Atoms do in displaying Xvideo output? No, this along with GMA 500/600 and 3600 is PowerVR based. Even the experimental and incomplete drm driver is GPL licensed so we'll never touch it. Thankfully Intel is ditching the PowerVR parts in the valleyview atoms that are supposedly coming out later this year.
Re: wireless ethernet (ralink) not working
Hi, On 03/23/13 11:02, Mihai Popescu wrote: No, it is the fact that you are using 'nwkey' instead of 'wpakey', a common mistake I was plagued with. Try the command 'man ral' and you will see some examples. But i am connecting to a WEP protected network, not WPA. Riccardo
Re: wireless ethernet (ralink) not working
Hi, just saying that I don't need a lesson in how to set up a network security, but how to connecto to an existing one using my card, I do wonder (read below) On 03/22/13 23:59, Riccardo Mottola wrote: I then run dhclient ral0 but I get no link: # dhclient ral0 ral0: no link . sleeping The strange part is that I don't see the lights blinking. usually during this operation on other operating system I see network traffic. Shouldn't I always see blinking lights when doing a dhcp request? Even if the key were to be wrong (which it isn't)? Thanks, Riccardo
Re: wireless ethernet (ralink) not working
Riccardo Mottola riccardo.mott...@libero.it writes: But i am connecting to a WEP protected network, not WPA. typical hostname.if for a wep network: media autoselect nwid wepnetwork nwkey secretasitgets dhcp rtsol activates at boot, or if you do 'sudo sh /etc/netstart ifname' for wpa, you would change 'nwkey' to 'wpakey' and get sensible defaults. - P -- Peter N. M. Hansteen, member of the first RFC 1149 implementation team http://bsdly.blogspot.com/ http://www.bsdly.net/ http://www.nuug.no/ Remember to set the evil bit on all malicious network traffic delilah spamd[29949]: 85.152.224.147: disconnected after 42673 seconds.
Re: Atom D2550 (cedarview) working now with kms?
On Sun, Mar 24, 2013 at 00:39, Brett Mahar wrote: Hi, Now that the KMS stuff has arrived (thanks for that!), I'm looking at this device from Shuttle http://axcco.com/xs35v3.html. It has an Atom D2550 with Intel GMA 3650 Graphic engine, should it work as well as the Pineview series Atoms do in displaying Xvideo output? No. Only video with D/Nxxx (three digit) Atoms may work, if it's the regular onboard chipset intel video. A lot of them are nvidia ion, which is bad news too, obviously. 4 digit models are crazy powervr video.
Re: wireless ethernet (ralink) not working
On Sat, Mar 23, 2013 at 20:04, Riccardo Mottola wrote: The strange part is that I don't see the lights blinking. usually during this operation on other operating system I see network traffic. Shouldn't I always see blinking lights when doing a dhcp request? Even if the key were to be wrong (which it isn't)? This depends on the driver, but usually the OpenBSD behavior is to leave the light on if connected and blink it when not connected. There is no blinking to indicate receiving or transmitting packets.
X fails to run after 5.2 upgrade
Hi, on a thinkpad 600, I had 5.1 running fine. I did an update to 5.2 (by using the updater included in the bsd.rd kernel) Now Xorg dies when I run startx: # cat /var/log/Xorg.0.log [ 304.088] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem (Operation not permitted) Check that you have set 'machdep.allowaperture=1' in /etc/sysctl.conf and reboot your machine refer to xf86(4) for details [ 304.090]linear framebuffer access unavailable [ 304.092] Segmentation fault at address 0x0 [ 304.092] Fatal server error: [ 304.093] Caught signal 11 (Segmentation fault). Server aborting [ 304.093] [ 304.094] Please consult the The X.Org Foundation support at http://wiki.x.org for help. [ 304.094] Please also check the log file at /var/log/Xorg.0.log for additional information. [ 304.094] [ 304.097] Server terminated with error (1). Closing log file. The videocard of the laptop is: vga1 at pci0 dev 3 function 0 Neomagic Magicgraph NM2160 rev 0x01 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) Any hints? could it be that my upgrade is incomplete? I run X without xorg.conf, so that one doesn't need to be updated. Thank you, Riccardo
Re: X fails to run after 5.2 upgrade
On Sat, Mar 23, 2013 at 22:38, Riccardo Mottola wrote: [ 304.088] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem (Operation not permitted) Check that you have set 'machdep.allowaperture=1' in /etc/sysctl.conf and reboot your machine refer to xf86(4) for details Did you?
Re: X fails to run after 5.2 upgrade
Him On 03/23/13 22:46, Ted Unangst wrote: On Sat, Mar 23, 2013 at 22:38, Riccardo Mottola wrote: [ 304.088] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem (Operation not permitted) Check that you have set 'machdep.allowaperture=1' in /etc/sysctl.conf and reboot your machine refer to xf86(4) for details Did you? No, I didn't. Or better, I did, but during the upgrade process I wiped my sysctl.conf file, so the aperture line was commented out. Thanks for spotting that, it works fine now. Riccardo
Re: wireless ethernet (ralink) not working
Hi, On 03/23/13 20:13, Peter N. M. Hansteen wrote: Riccardo Mottola riccardo.mott...@libero.it writes: But i am connecting to a WEP protected network, not WPA. typical hostname.if for a wep network: media autoselect nwid wepnetwork nwkey secretasitgets dhcp rtsol activates at boot, or if you do 'sudo sh /etc/netstart ifname' for wpa, you would change 'nwkey' to 'wpakey' and get sensible defaults. Thanks, this looks equivalent to me to what I did configure at the shell command line using ifconfig. In fact, If I run netstart later, I too get no link... sleeping. I start to think that there is a problem with the card's driver: if I leave the card in at boot time, the kernel will panic and drop into ddb. However if I insert later, as I did up to now, I don't Riccardo
Re: [patch] tic man page file path error
On Sat, Mar 23, 2013 at 6:00 PM, Creamy cre...@nocrater.com wrote: On Sat, Mar 23, 2013 at 05:31:15PM -0430, Andres Perera wrote: $ ident src/lib/libcurses/tinfo/read_bsd_terminfo.c src/lib/libcurses/tinfo/read_bsd_terminfo.c: $OpenBSD: read_bsd_terminfo.c,v 1.18 2010/01/12 23:22:06 nicm Exp $ $ grep -B2 -nw _PATH_TERMINFO src/lib/libcurses/tinfo/read_bsd_terminfo.c 22-#include term_entry.h 23- 24:#define _PATH_TERMINFO /usr/share/misc/terminfo -- 60- 61-/* Finally we check the system terminfo file */ 62:*fname++ = _PATH_TERMINFO; $ ls /usr/share/misc/terminfo ls: /usr/share/misc/terminfo: No such file or directory $ ls /usr/share/terminfo 1 2 3 4 5 6 7 8 9 A E L M N P Q X a b c d e f g h i j k l m n o p q r s t u v w x z your tree is messed up or you're running something other than -current $ grep -rw terminfo src/distrib/sets/lists src/distrib/sets/lists/base/mi:./usr/share/misc/terminfo.db src/distrib/sets/lists/comp/mi:./usr/share/man/man3/terminfo.3 src/distrib/sets/lists/comp/.#mi.1.969:./usr/share/man/man3/terminfo.3 src/distrib/sets/lists/man/mi:./usr/share/man/man5/terminfo.5 taking this to misc@
Re: Atom D2550 (cedarview) working now with kms?
On 03/24/13 08:00, Ted Unangst wrote: On Sun, Mar 24, 2013 at 00:39, Brett Mahar wrote: Hi, Now that the KMS stuff has arrived (thanks for that!), I'm looking at this device from Shuttle http://axcco.com/xs35v3.html. It has an Atom D2550 with Intel GMA 3650 Graphic engine, should it work as well as the Pineview series Atoms do in displaying Xvideo output? No. Only video with D/Nxxx (three digit) Atoms may work, if it's the regular onboard chipset intel video. A lot of them are nvidia ion, which is bad news too, obviously. 4 digit models are crazy powervr video. Thanks Ted and Jonathan, I would have wasted $200 without that info! Looks like the ancient core2duo will be playing movies for a while longer.
Re: Atom D2550 (cedarview) working now with kms?
On Sun, Mar 24, 2013 at 01:10:25PM +1100, Brett Mahar wrote: On 03/24/13 08:00, Ted Unangst wrote: On Sun, Mar 24, 2013 at 00:39, Brett Mahar wrote: Hi, Now that the KMS stuff has arrived (thanks for that!), I'm looking at this device from Shuttle http://axcco.com/xs35v3.html. It has an Atom D2550 with Intel GMA 3650 Graphic engine, should it work as well as the Pineview series Atoms do in displaying Xvideo output? No. Only video with D/Nxxx (three digit) Atoms may work, if it's the regular onboard chipset intel video. A lot of them are nvidia ion, which is bad news too, obviously. 4 digit models are crazy powervr video. Thanks Ted and Jonathan, I would have wasted $200 without that info! Looks like the ancient core2duo will be playing movies for a while longer. The new ValleyView Atom coming out in a few months will finally replace the PowerVR cores being used in the past with the platform with a Gen7 (Ivy Bridge) core. -- This message has been scanned for viruses and dangerous content by MailScanner, and is believed to be clean.
