ipv6 static routing
Hi, I have an openbsd box with two interface. # cat /etc/hostname.vio0 inet 202.249.25.29 255.255.255.224 # cat /etc/mygate 202.249.25.1 # cat /etc/hostname.vio1 inet6 2001:d30:101:624::64 64 !route -n add -inet6 default FE80::21B:2AFF:FEE2:A4C0%vio1 my goal: ipv4 routing should go via interface vio0 with default gateway 202.249.25.1 and ipv6 routing should go via interface vio1 with default gateway FE80::21B:2AFF:FEE2:A4C0%vio1 while IPv4 is working fine, IPv6 does not work as expected. here's the IPv6 routing table Internet6: DestinationGateway Flags Refs Use Mtu Prio Iface ::/104 ::1UGRS 00 - 8 lo0 ::/96 ::1UGRS 00 - 8 lo0 defaultfe80::21b:2aff:fee2:a4c0%vio1 US 0 75 - 8 vio1 # ndp -a Neighbor Linklayer Address Netif ExpireS Flags 2001:d30:101:624::64 0:16:3e:e3:6:de vio1 permanent R fe80::216:3eff:fe5d:cb31%vio00:16:3e:5d:cb:31vio0 permanent R fe80::216:3eff:fee3:6de%vio1 0:16:3e:e3:6:de vio1 permanent R fe80::21b:2aff:fee2:a4c0%vio10:1b:2a:e2:a4:c0vio1 2sD R fe80::1%lo0 (incomplete) lo0 permanent R do I miss something here? thanks! -- -dikshie-
www problem in undeadly.org
http://undeadly.org/ in section OpenBSD Errata month is incorrect! they said 2013-13-07 001 RELIABILITY A crash can happen on pflow(4) interface destruction. 2013-13-07 002 SECURITY A memory corruption vulnerability exists in the post-authentication sshd process when an AES-GCM cipher (aes128-...@openssh.com or aes256-...@openssh.com) is selected during kex exchange. Review the gcmrekey advisory for a mitigation. 2013-13-11 003 RELIABILITY An unprivileged user may hang the system. 2013-13-21 004 SECURITY A problem exists in nginx(8) which might allow an attacker to bypass security restrictions in certain configurations by using a specially crafted request. This issue was assigned CVE-2013-4547.
loongson:automatic loading of OpenBSD:YES to 8G ssd No for 500G disk
http://ftp.openbsd.org/pub/OpenBSD/5.4/loongson/INSTALL.loongson --- To overcome this annoyance, simply change the `moresz' environment variable to a large value (30 or larger will do): PMON set moresz 30 The bootloader will attempt to load the kernel file set in the `bsd' environment variable. Should this fail, it will wait for user commands. The value of `bsd' should be a path within the OpenBSD root filesystem on the disk, such as: PMON set bsd /bsd If you have removed the Linux installation or if you do not want to use the boot menu, you may simply disable it in the environment, and set the `al' variable to point to the bootloader path: PMON set ShowBootMenu no PMON set al /dev/fs/ext2@wd0/boot/boot automatic loading of OpenBSD binaries is ok. 2. change the disk to Seagate 500g disk, install 5.4 release with same settings. 1)when power up the notebook, system will hung in the splash screen (Press Tab to recover | Press Del to setup) now hit Del, can not enter PMON prompt(nothing happend) 2)if power up the notebook and Press Del immediately, monitor will show BEV in SR set to zero. PMON now boot /dev/fs/ext2@wd0/boot/boot ok --dmesg- [ using 476376 bytes of bsd ELF symbol table ] Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2013 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 5.4 (GENERIC) #29: Tue Jul 30 22:12:34 MDT 2013 dera...@loongson.openbsd.org:/usr/src/sys/arch/loongson/compile/GENERIC real mem = 1073741824 (1024MB) avail mem = 1058979840 (1009MB) mainbus0 at root: Lemote Yeeloong cpu0 at mainbus0: STC Loongson2F CPU 796 MHz, STC Loongson2F FPU cpu0: cache L1-I 64KB D 64KB 4 way, L2 512KB 4 way bonito0 at mainbus0: memory and PCI-X controller, rev 1 pci0 at bonito0 bus 0 rl0 at pci0 dev 7 function 0 Realtek 8139 rev 0x10: irq 5, address 00:23:8b:b5:35:9e rlphy0 at rl0 phy 0: RTL internal PHY smfb0 at pci0 dev 8 function 0 Silicon Motion LynxEM+ rev 0xb0 wsdisplay0 at smfb0 mux 1: console (std, vt100 emulation) ohci0 at pci0 dev 9 function 0 NEC USB rev 0x44: irq 7, version 1.0 ehci0 at pci0 dev 9 function 1 NEC USB rev 0x05: irq 7 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 NEC EHCI root hub rev 2.00/1.00 addr 1 glxpcib0 at pci0 dev 14 function 0 AMD CS5536 ISA rev 0x03: rev 3, 32-bit 3579545Hz timer, watchdog, gpio, i2c isa0 at glxpcib0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 mcclock0 at isa0 port 0x70/2: mc146818 or compatible ykbec0 at isa0 port 0x381/3 gpio1 at glxpcib0: 32 pins iic at glxpcib0 not configured glxclk0 at glxpcib0: clock, prof pciide0 at pci0 dev 14 function 2 AMD CS5536 IDE rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: ST9500325AS wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) auglx0 at pci0 dev 14 function 3 AMD CS5536 Audio rev 0x01: isa irq 9, CS5536 AC97 ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0) audio0 at auglx0 ohci1 at pci0 dev 14 function 4 AMD CS5536 USB rev 0x02: isa irq 11, version 1.0, legacy support ehci1 at pci0 dev 14 function 5 AMD CS5536 USB rev 0x02: isa irq 11 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 AMD EHCI root hub rev 2.00/1.00 addr 1 usb2 at ohci0: USB revision 1.0 uhub2 at usb2 NEC OHCI root hub rev 1.00/1.00 addr 1 usb3 at ohci1: USB revision 1.0 uhub3 at usb3 AMD OHCI root hub rev 1.00/1.00 addr 1 apm0 at mainbus0 umass0 at uhub1 port 1 configuration 1 interface 0 Generic USB2.0-CRW rev 2.00/58.87 addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, initiator 0 sd0 at scsibus0 targ 1 lun 0: Generic-, Multi-Card, 1.00 SCSI0 0/direct removable serial.0bda015811417340 urtw0 at uhub1 port 4 Realtek RTL8187B rev 2.00/2.00 addr 3 urtw0: RTL8187B rev E, address 00:17:c4:5a:19:d7 uhidev0 at uhub3 port 3 configuration 1 interface 0 Dell Dell USB Keyboard rev 1.10/3.01 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets pmon bootpath: /dev/disk/wd0 boot device: wd0 root on wd0a (12e4475847814fad.a) swap on wd0b dump on wd0b
Re: ipv6 static routing
Your /etc/mygate file can look like this : # cat /etc/mygate 202.249.25.1 FE80::21B:2AFF:FEE2:A4C0%vio1 Make sure you have net.inet6.ip6.forwarding=1 in /etc/sysctl.conf On 8 December 2013 09:59, dikshie diks...@gmail.com wrote: Hi, I have an openbsd box with two interface. # cat /etc/hostname.vio0 inet 202.249.25.29 255.255.255.224 # cat /etc/mygate 202.249.25.1 # cat /etc/hostname.vio1 inet6 2001:d30:101:624::64 64 !route -n add -inet6 default FE80::21B:2AFF:FEE2:A4C0%vio1 my goal: ipv4 routing should go via interface vio0 with default gateway 202.249.25.1 and ipv6 routing should go via interface vio1 with default gateway FE80::21B:2AFF:FEE2:A4C0%vio1 while IPv4 is working fine, IPv6 does not work as expected. here's the IPv6 routing table Internet6: DestinationGateway Flags Refs Use Mtu Prio Iface ::/104 ::1UGRS 00 - 8 lo0 ::/96 ::1UGRS 00 - 8 lo0 defaultfe80::21b:2aff:fee2:a4c0%vio1 US 0 75 - 8 vio1 # ndp -a Neighbor Linklayer Address Netif ExpireS Flags 2001:d30:101:624::64 0:16:3e:e3:6:de vio1 permanent R fe80::216:3eff:fe5d:cb31%vio00:16:3e:5d:cb:31vio0 permanent R fe80::216:3eff:fee3:6de%vio1 0:16:3e:e3:6:de vio1 permanent R fe80::21b:2aff:fee2:a4c0%vio10:1b:2a:e2:a4:c0vio1 2sD R fe80::1%lo0 (incomplete) lo0 permanent R do I miss something here? thanks! -- -dikshie-
Re: loongson:automatic loading of OpenBSD:YES to 8G ssd No for 500G disk
@163.com server eat some lines of my original email full message should be-- http://ftp.openbsd.org/pub/OpenBSD/5.4/loongson/INSTALL.loongson --- To overcome this annoyance, simply change the `moresz' environment variable to a large value (30 or larger will do): PMON set moresz 30 The bootloader will attempt to load the kernel file set in the `bsd' environment variable. Should this fail, it will wait for user commands. The value of `bsd' should be a path within the OpenBSD root filesystem on the disk, such as: PMON set bsd /bsd If you have removed the Linux installation or if you do not want to use the boot menu, you may simply disable it in the environment, and set the `al' variable to point to the bootloader path: PMON set ShowBootMenu no PMON set al /dev/fs/ext2@wd0/boot/boot automatic loading of OpenBSD binaries is ok. 2. change the disk to Seagate 500g disk, install 5.4 release with same settings. 1)when power up the notebook, system will hung in the splash screen (Press Tab to recover | Press Del to setup) now hit Del, can not enter PMON prompt(nothing happend) 2)if power up the notebook and Press Del immediately, monitor will show BEV in SR set to zero. PMON now boot /dev/fs/ext2@wd0/boot/boot ok --dmesg- [ using 476376 bytes of bsd ELF symbol table ] Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2013 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 5.4 (GENERIC) #29: Tue Jul 30 22:12:34 MDT 2013 dera...@loongson.openbsd.org:/usr/src/sys/arch/loongson/compile/GENERIC real mem = 1073741824 (1024MB) avail mem = 1058979840 (1009MB) mainbus0 at root: Lemote Yeeloong cpu0 at mainbus0: STC Loongson2F CPU 796 MHz, STC Loongson2F FPU cpu0: cache L1-I 64KB D 64KB 4 way, L2 512KB 4 way bonito0 at mainbus0: memory and PCI-X controller, rev 1 pci0 at bonito0 bus 0 rl0 at pci0 dev 7 function 0 Realtek 8139 rev 0x10: irq 5, address 00:23:8b:b5:35:9e rlphy0 at rl0 phy 0: RTL internal PHY smfb0 at pci0 dev 8 function 0 Silicon Motion LynxEM+ rev 0xb0 wsdisplay0 at smfb0 mux 1: console (std, vt100 emulation) ohci0 at pci0 dev 9 function 0 NEC USB rev 0x44: irq 7, version 1.0 ehci0 at pci0 dev 9 function 1 NEC USB rev 0x05: irq 7 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 NEC EHCI root hub rev 2.00/1.00 addr 1 glxpcib0 at pci0 dev 14 function 0 AMD CS5536 ISA rev 0x03: rev 3, 32-bit 3579545Hz timer, watchdog, gpio, i2c isa0 at glxpcib0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 mcclock0 at isa0 port 0x70/2: mc146818 or compatible ykbec0 at isa0 port 0x381/3 gpio1 at glxpcib0: 32 pins iic at glxpcib0 not configured glxclk0 at glxpcib0: clock, prof pciide0 at pci0 dev 14 function 2 AMD CS5536 IDE rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: ST9500325AS wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) auglx0 at pci0 dev 14 function 3 AMD CS5536 Audio rev 0x01: isa irq 9, CS5536 AC97 ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0) audio0 at auglx0 ohci1 at pci0 dev 14 function 4 AMD CS5536 USB rev 0x02: isa irq 11, version 1.0, legacy support ehci1 at pci0 dev 14 function 5 AMD CS5536 USB rev 0x02: isa irq 11 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 AMD EHCI root hub rev 2.00/1.00 addr 1 usb2 at ohci0: USB revision 1.0 uhub2 at usb2 NEC OHCI root hub rev 1.00/1.00 addr 1 usb3 at ohci1: USB revision 1.0 uhub3 at usb3 AMD OHCI root hub rev 1.00/1.00 addr 1 apm0 at mainbus0 umass0 at uhub1 port 1 configuration 1 interface 0 Generic USB2.0-CRW rev 2.00/58.87 addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, initiator 0 sd0 at scsibus0 targ 1 lun 0: Generic-, Multi-Card, 1.00 SCSI0 0/direct removable serial.0bda015811417340 urtw0 at uhub1 port 4 Realtek RTL8187B rev 2.00/2.00 addr 3 urtw0: RTL8187B rev E, address 00:17:c4:5a:19:d7 uhidev0 at uhub3 port 3 configuration 1 interface 0 Dell Dell USB Keyboard rev 1.10/3.01 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets pmon bootpath: /dev/disk/wd0 boot device: wd0 root on wd0a (12e4475847814fad.a) swap on wd0b dump on wd0b
Re: pf: bad icmp packet checksums on vlans when natted to own network address
Am 2013-12-06 20:54, schrieb Lawrence Teo: On Sat, Nov 23, 2013 at 08:31:56PM +0100, Walter Haidinger wrote: Am 2013-11-23 17:41, schrieb mxb: http://marc.info/?l=openbsd-techm=138493672609487w=2 This one might help? Thanks for the reference but no, unfortunately not. Applied the patch the issue remains. The above diff won't work on 5.4 because it depends on some significant post-5.4 changes in the way checksumming is done. Ok, thanks. Should have anticipated that, though. Can you please try this one instead? http://marc.info/?l=openbsd-techm=137571298511653w=2 No, unfortunately no change. Still can't ping _from_ the machine any machine on the same VLAN network with match out ... to any However, there seems to be a more severe problem with VLANs and NAT. I'm going to add new thread because the topic is way more general. Best Regards, Walter
natting vlans broken? (was: pf: bad icmp packet checksums on vlans when natted to own network address)
Am 2013-11-23 16:32, schrieb Walter Haidinger: Since moving to OpenBSD 5.4/i386, I noticed that I cannot ping some hosts on my vlan2. tcpdump on the receiving machines show icmp echo-requests having a bad checksum. I've managed to trace down the problem to the following pf rule: match out quick on vlan2 from (vlan2:network) to any nat-to (vlan2) The checksum mangling only occurs to packets when the _own_ network is natted, i.e. no nat or the following rule makes everything work: match out quick on vlan2 from (vlan2:network) to ! (vlan2:network) nat-to (vlan2) So far, I've only found icmp packets (tried only icmp echo-requests) to have bad checksums. No problems with tcp or udp traffic. Unfortunately this isn't quite true. Well, only on the machine itself. However, NAT on any vlan seems to be broken with OpenBSD 5.4. Using the simple pf rules: match out on re0 from any to any nat-to (re0) pass in quick on vlan2 all Should enable NAT on vlan2 (parent is re0, states floating), right? Turns out it doesn't work at all (no outbound connection possible). If I use a non-vlan IP, there is no problem. Is this reproducible by someone? Best Regards, Walter
Keeping OpenBSD up2date
I like OpenBSD for it's easiness, straight forwardness and simpleness on daily usage. Unfortunately with the last releases, I find keeping OpenBSD up2date between releases to be confusing. Please help me on this one: Well... I have been quite happy using cvsup to keep my src and ports up2date, but it seems that this is getting quite impossible to use lately, as the servers I normally use to pull from seem to block cvsup. )-: Then I read that cvsync seem to be the way to go... although I can't get it to work proberly. I follow http://www.openbsd.org/cvsync.html and I am able to pull a repository (size 5.2G) Then I am going to pull the patch branch (well using cvsup, I normally go for current), and I do: # cd /usr # cvs -d/cvs checkout -P src It works... I am getting what looks to be update source files. I find the changes of http://ftp.openbsd.org/pub/OpenBSD/patches/5.4/common/002_sshgcm.patch in monitor_wrap.c Then I going to compile from source (system is i386) by doing: # cd /usr/src/sys/arch/i386/conf # config GENERIC # cd ../compile/GENERIC # make clean make # make install Well... it looks to be going fine... not noticing any errors at least, and I can find the new kernel /bsd. But... Rebooting... and the system ends in limbo-mode. I have to boot doing b /obsd I can't figure out where the process goes wrong. Anyone? Regards, Lars.
Re: samba and e2fsprogs packages -- 5.4
On 2013-12-04, Brad Smith b...@comstyle.com wrote: On 04/12/13 4:44 PM, Vadim Zhukov wrote: 2013/12/5 Peter Fraser p...@thinkage.ca: samba required the e2fsprogs package. The problem occurs when trying to use samba's net command. The net command requires libuuid. It was not easy to find where libuuid was located. pkg_locate libuuid.so - no? Even if that tool was installed that would not locate anything if the package in question is not already installed, right? pkglocate is just a simple shell script which uses locate(1) on a database built with pkg_mklocatedb(1) as part of a ports build, which includes files from every port, not just those which are installed, e.g. $ pkglocate libuuid.so e2fsprogs-1.42.7p0:sysutils/e2fsprogs:/usr/local/lib/libuuid.so.14.0 fedora_base-10.0p1:emulators/fedora/base:/usr/local/emul/fedora/lib/libuuid.so.1 fedora_base-10.0p1:emulators/fedora/base:/usr/local/emul/fedora/lib/libuuid.so.1.2 $ ls -l /var/db/pkg/fedora* ls: /var/db/pkg/fedora*: No such file or directory
Re: Setting quotas on multiple users
On 2013-12-04, Cyrus cyrus_the_gr...@riseup.net wrote: On 05/12/13 00:38, Otto Moerbeek wrote: On Wed, Dec 04, 2013 at 11:56:31PM +1100, Cyrus wrote: I have enabled quotas on my system a bit late. I am hoping someone could provide me with a script that could set the quotas for multiple users. I really don't want to have to go through users one by one and enable quotas it will take forever. I guess the answer is in the man page of edquota. edquota -p user user1 user2 user3... -Otto That is equally as painful as what I didn't want to do. I still have to edit each quota manually. Surely this can be scripted? I think you're missing the -p flag.
Re: DNS problem
Turns out the problem was with the Internet Guide service. If the IP address from which the query was sent was on the subscriber list then the incorrect info was sent. That's why it worked from one of my networks but not the others. Thanks to all. Chris
Re: ipv6 static routing
On Sun, Dec 8, 2013 at 10:14 PM, Marios Makassikis mmakassi...@gmail.com wrote: Your /etc/mygate file can look like this : # cat /etc/mygate 202.249.25.1 FE80::21B:2AFF:FEE2:A4C0%vio1 Make sure you have net.inet6.ip6.forwarding=1 in /etc/sysctl.conf same result with previous one. # ndp -a Neighbor Linklayer Address Netif ExpireS Flags 2001:d30:101:624::64 0:16:3e:65:2b:b vio1 permanent R fe80::216:3eff:fe1b:ac9c%vio00:16:3e:1b:ac:9cvio0 permanent R fe80::216:3eff:fe65:2b0b%vio10:16:3e:65:2b:b vio1 permanent R fe80::21b:2aff:fee2:a4c0%vio10:1b:2a:e2:a4:c0vio1 23h58m10s S R fe80::1%lo0 (incomplete) lo0 permanent R # sysctl -a |grep forward net.inet.ip.forwarding=1 net.inet.ip.mforwarding=0 net.inet6.ip6.forwarding=1 net.inet6.ip6.mforwarding=0 # route -n show -inet6 Routing tables Internet6: DestinationGateway Flags Refs Use Mtu Prio Iface ::/104 ::1UGRS 00 - 8 lo0 ::/96 ::1UGRS 00 - 8 lo0 defaultfe80::21b:2aff:fee2:a4c0%vio1 UGS 02 - 8 vio1 ::1::1UH 140 33144 4 lo0 ::127.0.0.0/104::1UGRS 00 - 8 lo0 ::224.0.0.0/100::1UGRS 00 - 8 lo0 ::255.0.0.0/104::1UGRS 00 - 8 lo0 :::0.0.0.0/96 ::1UGRS 00 - 8 lo0 2001:d30:101:624::/64 link#2 UC 00 - 4 vio1 # ifconfig vio0 vio0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 lladdr 00:16:3e:1b:ac:9c priority: 0 groups: egress media: Ethernet autoselect status: active inet 202.249.25.29 netmask 0xffe0 broadcast 202.249.25.31 inet6 fe80::216:3eff:fe1b:ac9c%vio0 prefixlen 64 scopeid 0x1 # ifconfig vio1 vio1: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 lladdr 00:16:3e:65:2b:0b priority: 0 groups: egress media: Ethernet autoselect status: active inet6 2001:d30:101:624::64 prefixlen 64 inet6 fe80::216:3eff:fe65:2b0b%vio1 prefixlen 64 scopeid 0x2 # traceroute6 -n www.google.com traceroute6 to www.google.com (2404:6800:4001:c01::6a) from 2001:d30:101:624::64, 64 hops max, 12 byte packets 1 * * * 2 * * * ^C # thanks!
Re: ipv6 static routing
Is PF enabled ? If so, perhaps your current rules are IPv4 only. Can you ping6 from this host ? On 8 December 2013 17:00, dikshie diks...@gmail.com wrote: On Sun, Dec 8, 2013 at 10:14 PM, Marios Makassikis mmakassi...@gmail.com wrote: Your /etc/mygate file can look like this : # cat /etc/mygate 202.249.25.1 FE80::21B:2AFF:FEE2:A4C0%vio1 Make sure you have net.inet6.ip6.forwarding=1 in /etc/sysctl.conf same result with previous one. # ndp -a Neighbor Linklayer Address Netif ExpireS Flags 2001:d30:101:624::64 0:16:3e:65:2b:b vio1 permanent R fe80::216:3eff:fe1b:ac9c%vio00:16:3e:1b:ac:9cvio0 permanent R fe80::216:3eff:fe65:2b0b%vio10:16:3e:65:2b:b vio1 permanent R fe80::21b:2aff:fee2:a4c0%vio10:1b:2a:e2:a4:c0vio1 23h58m10s S R fe80::1%lo0 (incomplete) lo0 permanent R # sysctl -a |grep forward net.inet.ip.forwarding=1 net.inet.ip.mforwarding=0 net.inet6.ip6.forwarding=1 net.inet6.ip6.mforwarding=0 # route -n show -inet6 Routing tables Internet6: DestinationGateway Flags Refs Use Mtu Prio Iface ::/104 ::1UGRS 00 - 8 lo0 ::/96 ::1UGRS 00 - 8 lo0 defaultfe80::21b:2aff:fee2:a4c0%vio1 UGS 02 - 8 vio1 ::1::1UH 140 33144 4 lo0 ::127.0.0.0/104::1UGRS 00 - 8 lo0 ::224.0.0.0/100::1UGRS 00 - 8 lo0 ::255.0.0.0/104::1UGRS 00 - 8 lo0 :::0.0.0.0/96 ::1UGRS 00 - 8 lo0 2001:d30:101:624::/64 link#2 UC 00 - 4 vio1 # ifconfig vio0 vio0: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 lladdr 00:16:3e:1b:ac:9c priority: 0 groups: egress media: Ethernet autoselect status: active inet 202.249.25.29 netmask 0xffe0 broadcast 202.249.25.31 inet6 fe80::216:3eff:fe1b:ac9c%vio0 prefixlen 64 scopeid 0x1 # ifconfig vio1 vio1: flags=8843UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST mtu 1500 lladdr 00:16:3e:65:2b:0b priority: 0 groups: egress media: Ethernet autoselect status: active inet6 2001:d30:101:624::64 prefixlen 64 inet6 fe80::216:3eff:fe65:2b0b%vio1 prefixlen 64 scopeid 0x2 # traceroute6 -n www.google.com traceroute6 to www.google.com (2404:6800:4001:c01::6a) from 2001:d30:101:624::64, 64 hops max, 12 byte packets 1 * * * 2 * * * ^C # thanks!
Re: ipv6 static routing
On Mon, Dec 9, 2013 at 1:38 AM, Marios Makassikis mmakassi...@gmail.com wrote: Is PF enabled ? If so, perhaps your current rules are IPv4 only. Can you ping6 from this host ? pf is disable. # ndp -a Neighbor Linklayer Address Netif ExpireS Flags 2001:d30:101:624::64 0:16:3e:65:2b:b vio1 permanent R fe80::216:3eff:fe1b:ac9c%vio00:16:3e:1b:ac:9cvio0 permanent R fe80::216:3eff:fe65:2b0b%vio10:16:3e:65:2b:b vio1 permanent R fe80::21b:2aff:fee2:a4c0%vio1(incomplete)vio1 expired N fe80::1%lo0 (incomplete) lo0 permanent R # # route -n show -inet6 |grep vio1 defaultfe80::21b:2aff:fee2:a4c0%vio1 UGS 00 - 8 vio1 2001:d30:101:624::/64 link#2 UC 10 - 4 vio1 2001:d30:101:624::100:1b:2a:e2:a4:c0 UHLc 04 - 4 vio1 fe80::%vio1/64 link#2 UC 10 - 4 vio1 fe80::216:3eff:fe65:2b0b%vio1 00:16:3e:65:2b:0b UHL 00 - 4 lo0 fe80::21b:2aff:fee2:a4c0%vio1 00:1b:2a:e2:a4:c0 UHLc 19 - 4 vio1 ff01::%vio1/32 link#2 UC 00 - 4 vio1 ff02::%vio1/32 link#2 UC 10 - 4 vio1 ff02::1:ffe2:a4c0%vio1 link#2 UHLc 00 - 4 vio1 ping6 to gateway's link local is fine. # ping6 fe80::21b:2aff:fee2:a4c0%vio1 PING6(56=40+8+8 bytes) fe80::216:3eff:fe65:2b0b%vio1 -- fe80::21b:2aff:fee2:a4c0%vio1 16 bytes from fe80::21b:2aff:fee2:a4c0%vio1, icmp_seq=0 hlim=64 time=1.811 ms 16 bytes from fe80::21b:2aff:fee2:a4c0%vio1, icmp_seq=1 hlim=64 time=0.912 ms 16 bytes from fe80::21b:2aff:fee2:a4c0%vio1, icmp_seq=2 hlim=64 time=0.948 ms 16 bytes from fe80::21b:2aff:fee2:a4c0%vio1, icmp_seq=3 hlim=64 time=0.883 ms 16 bytes from fe80::21b:2aff:fee2:a4c0%vio1, icmp_seq=4 hlim=64 time=0.938 ms ^C --- fe80::21b:2aff:fee2:a4c0%vio1 ping6 statistics --- 5 packets transmitted, 5 packets received, 0.0% packet loss round-trip min/avg/max/std-dev = 0.883/1.098/1.811/0.357 ms # ping6 2001:D30:101:624::1 PING6(56=40+8+8 bytes) 2001:d30:101:624::64 -- 2001:d30:101:624::1 ^C --- 2001:D30:101:624::1 ping6 statistics --- 4 packets transmitted, 0 packets received, 100.0% packet loss
Re: ipv6 static routing
On 8 December 2013 17:54, dikshie diks...@gmail.com wrote: On Mon, Dec 9, 2013 at 1:38 AM, Marios Makassikis mmakassi...@gmail.com wrote: Is PF enabled ? If so, perhaps your current rules are IPv4 only. Can you ping6 from this host ? pf is disable. # ndp -a Neighbor Linklayer Address Netif ExpireS Flags 2001:d30:101:624::64 0:16:3e:65:2b:b vio1 permanent R fe80::216:3eff:fe1b:ac9c%vio00:16:3e:1b:ac:9cvio0 permanent R fe80::216:3eff:fe65:2b0b%vio10:16:3e:65:2b:b vio1 permanent R fe80::21b:2aff:fee2:a4c0%vio1(incomplete)vio1 expired N fe80::1%lo0 (incomplete) lo0 permanent R # # route -n show -inet6 |grep vio1 defaultfe80::21b:2aff:fee2:a4c0%vio1 UGS 00 - 8 vio1 2001:d30:101:624::/64 link#2 UC 10 - 4 vio1 2001:d30:101:624::100:1b:2a:e2:a4:c0 UHLc 04 - 4 vio1 fe80::%vio1/64 link#2 UC 10 - 4 vio1 fe80::216:3eff:fe65:2b0b%vio1 00:16:3e:65:2b:0b UHL 00 - 4 lo0 fe80::21b:2aff:fee2:a4c0%vio1 00:1b:2a:e2:a4:c0 UHLc 19 - 4 vio1 ff01::%vio1/32 link#2 UC 00 - 4 vio1 ff02::%vio1/32 link#2 UC 10 - 4 vio1 ff02::1:ffe2:a4c0%vio1 link#2 UHLc 00 - 4 vio1 ping6 to gateway's link local is fine. # ping6 fe80::21b:2aff:fee2:a4c0%vio1 PING6(56=40+8+8 bytes) fe80::216:3eff:fe65:2b0b%vio1 -- fe80::21b:2aff:fee2:a4c0%vio1 16 bytes from fe80::21b:2aff:fee2:a4c0%vio1, icmp_seq=0 hlim=64 time=1.811 ms 16 bytes from fe80::21b:2aff:fee2:a4c0%vio1, icmp_seq=1 hlim=64 time=0.912 ms 16 bytes from fe80::21b:2aff:fee2:a4c0%vio1, icmp_seq=2 hlim=64 time=0.948 ms 16 bytes from fe80::21b:2aff:fee2:a4c0%vio1, icmp_seq=3 hlim=64 time=0.883 ms 16 bytes from fe80::21b:2aff:fee2:a4c0%vio1, icmp_seq=4 hlim=64 time=0.938 ms ^C --- fe80::21b:2aff:fee2:a4c0%vio1 ping6 statistics --- 5 packets transmitted, 5 packets received, 0.0% packet loss round-trip min/avg/max/std-dev = 0.883/1.098/1.811/0.357 ms # ping6 2001:D30:101:624::1 PING6(56=40+8+8 bytes) 2001:d30:101:624::64 -- 2001:d30:101:624::1 ^C --- 2001:D30:101:624::1 ping6 statistics --- 4 packets transmitted, 0 packets received, 100.0% packet loss ^^^ You can ping6 the gateway, but not a global IPv6 address. It looks like you have IPv6 connectivity problem, and not routing/forwarding (i.e.: your gateway or some other router further upstream is misconfigured).
Re: Keeping OpenBSD up2date
Short version: you are doing it wrong. On 12/08/13 09:49, Lars Bonnesen wrote: I like OpenBSD for it's easiness, straight forwardness and simpleness on daily usage. Unfortunately with the last releases, I find keeping OpenBSD up2date between releases to be confusing. Please help me on this one: Well... I have been quite happy using cvsup to keep my src and ports up2date, but it seems that this is getting quite impossible to use lately, as the servers I normally use to pull from seem to block cvsup. )-: Then I read that cvsync seem to be the way to go... although I can't get it to work proberly. why are you using cvsync? Why do you want to maintain your own repository? ok, I'm deleting the rest of this out of fear that someone else might think this is the process. Go read http://www.openbsd.org/faq/faq5.html Start at the very first line, and go at least to 5.4. Pay very very close attention to sections 5.1, 5.2, 5.3 and 5.4. (yes, I repeat myself -- there's nothing in this first part you get to skip reading) Be very careful to read (and follow) what it tells you to do, NOT what you think it is telling you to do. Your use of non-words like up2date is telling me you are trying to use some other model on OpenBSD. Nick.
Re: Keeping OpenBSD up2date
Lars Bonnesen lars.bonne...@gmail.com wrote: I like OpenBSD for it's easiness, straight forwardness and simpleness on daily usage. Unfortunately with the last releases, I find keeping OpenBSD up2date between releases to be confusing. Please help me on this one: Well... I have been quite happy using cvsup to keep my src and ports up2date, but it seems that this is getting quite impossible to use lately, as the servers I normally use to pull from seem to block cvsup. )-: Then I read that cvsync seem to be the way to go... although I can't get it to work proberly. I follow http://www.openbsd.org/cvsync.html and I am able to pull a repository (size 5.2G) Then I am going to pull the patch branch (well using cvsup, I normally go for current), and I do: # cd /usr # cvs -d/cvs checkout -P src Yes that gives you -current. Did you install a snapshot first? Did you read current.html? It works... I am getting what looks to be update source files. I find the changes of http://ftp.openbsd.org/pub/OpenBSD/patches/5.4/common/002_sshgcm.patch in monitor_wrap.c Then I going to compile from source (system is i386) by doing: # cd /usr/src/sys/arch/i386/conf # config GENERIC # cd ../compile/GENERIC # make clean make # make install Well... it looks to be going fine... not noticing any errors at least, and I can find the new kernel /bsd. But... Rebooting... and the system ends in limbo-mode. Thanks for the detailed explanation. I have to boot doing b /obsd I can't figure out where the process goes wrong. Anyone? Your kernel was compiled with option LIMBO set, maybe? Provide more details. /Alexander Regards, Lars.
Re: Keeping OpenBSD up2date
If it doesn't matter how you update the system, much easier would be to go binary. I pretty regurarly follow snapshots and update from bsd.rd. Just read faqs about the subject. Packages are also easy to update, with pkg_add. Zoran
spamd in blacklist only mode
Hi, If I understand the man pages correctly, you should start both spamd and spamd-setup with the -b option when you want to use spamd in blacklist only mode. In /etc/rc.d/spamd, the -b option is set when you have spamd_black=yes in your rc.conf.local. However, spamd-setup is always started with -D only from /etc/rc. It doesn't check for the spamd_black environment variable and therefore set -b. So it seems that you have to adapt /etc/rc when you want to run spamd in blacklist only mode. This seems a bit odd, doesn't it? Am I missing something, or is this intended? Thanks, Maurice
Re: ipv6 static routing
On Mon, Dec 09, 2013 at 01:54:56AM +0900, dikshie wrote: On Mon, Dec 9, 2013 at 1:38 AM, Marios Makassikis mmakassi...@gmail.com wrote: Is PF enabled ? If so, perhaps your current rules are IPv4 only. Can you ping6 from this host ? pf is disable. # ndp -a Neighbor Linklayer Address Netif ExpireS Flags 2001:d30:101:624::64 0:16:3e:65:2b:b vio1 permanent R fe80::216:3eff:fe1b:ac9c%vio00:16:3e:1b:ac:9cvio0 permanent R fe80::216:3eff:fe65:2b0b%vio10:16:3e:65:2b:b vio1 permanent R fe80::21b:2aff:fee2:a4c0%vio1(incomplete)vio1 expired N fe80::1%lo0 (incomplete) lo0 permanent R # # route -n show -inet6 |grep vio1 defaultfe80::21b:2aff:fee2:a4c0%vio1 UGS 00 - 8 vio1 2001:d30:101:624::/64 link#2 UC 10 - 4 vio1 2001:d30:101:624::100:1b:2a:e2:a4:c0 UHLc 04 - 4 vio1 fe80::%vio1/64 link#2 UC 10 - 4 vio1 fe80::216:3eff:fe65:2b0b%vio1 00:16:3e:65:2b:0b UHL 00 - 4 lo0 fe80::21b:2aff:fee2:a4c0%vio1 00:1b:2a:e2:a4:c0 UHLc 19 - 4 vio1 ff01::%vio1/32 link#2 UC 00 - 4 vio1 ff02::%vio1/32 link#2 UC 10 - 4 vio1 ff02::1:ffe2:a4c0%vio1 link#2 UHLc 00 - 4 vio1 ping6 to gateway's link local is fine. # ping6 fe80::21b:2aff:fee2:a4c0%vio1 PING6(56=40+8+8 bytes) fe80::216:3eff:fe65:2b0b%vio1 -- fe80::21b:2aff:fee2:a4c0%vio1 16 bytes from fe80::21b:2aff:fee2:a4c0%vio1, icmp_seq=0 hlim=64 time=1.811 ms 16 bytes from fe80::21b:2aff:fee2:a4c0%vio1, icmp_seq=1 hlim=64 time=0.912 ms 16 bytes from fe80::21b:2aff:fee2:a4c0%vio1, icmp_seq=2 hlim=64 time=0.948 ms 16 bytes from fe80::21b:2aff:fee2:a4c0%vio1, icmp_seq=3 hlim=64 time=0.883 ms 16 bytes from fe80::21b:2aff:fee2:a4c0%vio1, icmp_seq=4 hlim=64 time=0.938 ms ^C --- fe80::21b:2aff:fee2:a4c0%vio1 ping6 statistics --- 5 packets transmitted, 5 packets received, 0.0% packet loss round-trip min/avg/max/std-dev = 0.883/1.098/1.811/0.357 ms # ping6 2001:D30:101:624::1 PING6(56=40+8+8 bytes) 2001:d30:101:624::64 -- 2001:d30:101:624::1 ^C --- 2001:D30:101:624::1 ping6 statistics --- 4 packets transmitted, 0 packets received, 100.0% packet loss Check with tcpdump if the packets go out and to the right place. Maybe try to figure out if they arrive at the destination to figure out where they get lost. -- :wq Claudio
Re: ipv6 static routing
On Mon, Dec 9, 2013 at 2:01 AM, Marios Makassikis mmakassi...@gmail.com wrote: You can ping6 the gateway, but not a global IPv6 address. It looks like you have IPv6 connectivity problem, and not routing/forwarding (i.e.: your gateway or some other router further upstream is misconfigured). i checked several times on switch and router. everything looks fine. i used linux before and everything works well :D # ip route 202.249.25.208/28 dev eth0 proto kernel scope link src 202.249.25.209 202.249.25.0/27 dev eth0 proto kernel scope link src 202.249.25.29 169.254.0.0/16 dev eth0 scope link default via 202.249.25.1 dev eth0 # ip -6 route 2001:d30:101:624::/64 dev eth1 metric 256 expires 21305003sec mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth0 metric 256 expires 21304998sec mtu 1500 advmss 1440 hoplimit 4294967295 fe80::/64 dev eth1 metric 256 expires 21305003sec mtu 1500 advmss 1440 hoplimit 4294967295 default via fe80::21b:2aff:fee2:a4c0 dev eth1 metric 1 expires 21305003sec mtu 1500 advmss 1440 hoplimit 4294967295 # ping6 fe80::21b:2aff:fee2:a4c0%eth1 PING fe80::21b:2aff:fee2:a4c0%eth1(fe80::21b:2aff:fee2:a4c0) 56 data bytes 64 bytes from fe80::21b:2aff:fee2:a4c0: icmp_seq=1 ttl=64 time=2.12 ms 64 bytes from fe80::21b:2aff:fee2:a4c0: icmp_seq=2 ttl=64 time=0.877 ms --- fe80::21b:2aff:fee2:a4c0%eth1 ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1000ms rtt min/avg/max/mdev = 0.877/1.503/2.129/0.626 ms # ping6 2001:d30:101:624::1 PING 2001:d30:101:624::1(2001:d30:101:624::1) 56 data bytes 64 bytes from 2001:d30:101:624::1: icmp_seq=1 ttl=64 time=2.79 ms 64 bytes from 2001:d30:101:624::1: icmp_seq=2 ttl=64 time=0.920 ms --- 2001:d30:101:624::1 ping statistics --- 2 packets transmitted, 2 received, 0% packet loss, time 1000ms rtt min/avg/max/mdev = 0.920/1.857/2.795/0.938 ms -- -- -dikshie-
Re: ipv6 static routing
On Mon, Dec 9, 2013 at 7:00 AM, Claudio Jeker cje...@diehard.n-r-g.com wrote: Check with tcpdump if the packets go out and to the right place. Maybe try to figure out if they arrive at the destination to figure out where they get lost. sure, i'll check with tcpdump after working/business hour. -dikshie-
Re: loongson:automatic loading of OpenBSD:YES to 8G ssd No for 500G disk
Sorry, 163.com mail server always eat some lines , so resend email from qq.com and add # disklabel wd0 Few people using loongson notebook? Recently one Chinese organization sale this notebook about 45 $, they dump about 1,000 notebooks in 2 months. http://www.loongsonclub.cn/tg/ Original email # disklabel wd0 http://ftp.openbsd.org/pub/OpenBSD/5.4/loongson/INSTALL.loongson --- To overcome this annoyance, simply change the `moresz' environment variable to a large value (30 or larger will do): PMON set moresz 30 The bootloader will attempt to load the kernel file set in the `bsd' environment variable. Should this fail, it will wait for user commands. The value of `bsd' should be a path within the OpenBSD root filesystem on the disk, such as: PMON set bsd /bsd If you have removed the Linux installation or if you do not want to use the boot menu, you may simply disable it in the environment, and set the `al' variable to point to the bootloader path: PMON set ShowBootMenu no PMON set al /dev/fs/ext2@wd0/boot/boot automatic loading of OpenBSD binaries is ok. 2. change the disk to Seagate 500g disk, install 5.4 release with same settings. 1)when power up the notebook, system will hung in the splash screen (Press Tab to recover | Press Del to setup) now hit Del, can not enter PMON prompt(nothing happend) 2)if power up the notebook and Press Del immediately, monitor will show BEV in SR set to zero. PMON now boot /dev/fs/ext2@wd0/boot/boot ok --dmesg- [ using 476376 bytes of bsd ELF symbol table ] Copyright (c) 1982, 1986, 1989, 1991, 1993 The Regents of the University of California. All rights reserved. Copyright (c) 1995-2013 OpenBSD. All rights reserved. http://www.OpenBSD.org OpenBSD 5.4 (GENERIC) #29: Tue Jul 30 22:12:34 MDT 2013 dera...@loongson.openbsd.org:/usr/src/sys/arch/loongson/compile/GENERIC real mem = 1073741824 (1024MB) avail mem = 1058979840 (1009MB) mainbus0 at root: Lemote Yeeloong cpu0 at mainbus0: STC Loongson2F CPU 796 MHz, STC Loongson2F FPU cpu0: cache L1-I 64KB D 64KB 4 way, L2 512KB 4 way bonito0 at mainbus0: memory and PCI-X controller, rev 1 pci0 at bonito0 bus 0 rl0 at pci0 dev 7 function 0 Realtek 8139 rev 0x10: irq 5, address 00:23:8b:b5:35:9e rlphy0 at rl0 phy 0: RTL internal PHY smfb0 at pci0 dev 8 function 0 Silicon Motion LynxEM+ rev 0xb0 wsdisplay0 at smfb0 mux 1: console (std, vt100 emulation) ohci0 at pci0 dev 9 function 0 NEC USB rev 0x44: irq 7, version 1.0 ehci0 at pci0 dev 9 function 1 NEC USB rev 0x05: irq 7 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 NEC EHCI root hub rev 2.00/1.00 addr 1 glxpcib0 at pci0 dev 14 function 0 AMD CS5536 ISA rev 0x03: rev 3, 32-bit 3579545Hz timer, watchdog, gpio, i2c isa0 at glxpcib0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pms0 at pckbc0 (aux slot) pckbc0: using irq 12 for aux slot wsmouse0 at pms0 mux 0 mcclock0 at isa0 port 0x70/2: mc146818 or compatible ykbec0 at isa0 port 0x381/3 gpio1 at glxpcib0: 32 pins iic at glxpcib0 not configured glxclk0 at glxpcib0: clock, prof pciide0 at pci0 dev 14 function 2 AMD CS5536 IDE rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility wd0 at pciide0 channel 0 drive 0: ST9500325AS wd0: 16-sector PIO, LBA48, 476940MB, 976773168 sectors wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 ignored (disabled) auglx0 at pci0 dev 14 function 3 AMD CS5536 Audio rev 0x01: isa irq 9, CS5536 AC97 ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0) audio0 at auglx0 ohci1 at pci0 dev 14 function 4 AMD CS5536 USB rev 0x02: isa irq 11, version 1.0, legacy support ehci1 at pci0 dev 14 function 5 AMD CS5536 USB rev 0x02: isa irq 11 usb1 at ehci1: USB revision 2.0 uhub1 at usb1 AMD EHCI root hub rev 2.00/1.00 addr 1 usb2 at ohci0: USB revision 1.0 uhub2 at usb2 NEC OHCI root hub rev 1.00/1.00 addr 1 usb3 at ohci1: USB revision 1.0 uhub3 at usb3 AMD OHCI root hub rev 1.00/1.00 addr 1 apm0 at mainbus0 umass0 at uhub1 port 1 configuration 1 interface 0 Generic USB2.0-CRW rev 2.00/58.87 addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, initiator 0 sd0 at scsibus0 targ 1 lun 0: Generic-, Multi-Card, 1.00 SCSI0 0/direct removable serial.0bda015811417340 urtw0 at uhub1 port 4 Realtek RTL8187B rev 2.00/2.00 addr 3 urtw0: RTL8187B rev E, address 00:17:c4:5a:19:d7 uhidev0 at uhub3 port 3 configuration 1 interface 0 Dell Dell USB Keyboard rev 1.10/3.01 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 variable keys, 6 key codes wskbd1 at ukbd0 mux 1 wskbd1: connecting to wsdisplay0 vscsi0 at root scsibus1 at vscsi0: 256 targets softraid0 at root scsibus2 at softraid0: 256 targets pmon bootpath: /dev/disk/wd0 boot device: wd0 root on wd0a (12e4475847814fad.a) swap on wd0b
Re: loongson:automatic loading of OpenBSD:YES to 8G ssd No for 500G disk
2. change the disk to Seagate 500g disk, install 5.4 release with same settings. 1)when power up the notebook, system will hung in the splash screen (Press Tab to recover | Press Del to setup) now hit Del, can not enter PMON prompt(nothing happend) 2)if power up the notebook and Press Del immediately, monitor will show BEV in SR set to zero. PMON now boot /dev/fs/ext2@wd0/boot/boot ok What is the PMON version reported by ``vers'' at the PMON prompt? Does the system boot if you press `enter' when the system is apparently hung with the splash screen still displayed? Miod
NPPPD
Hi, I've configured nppd server and clients for Linux, Android, iOS, OSX and Windows. This works on all platforms when routing all traffic through VPN except for Windows clients. I can connect to the vpn and I get a route for 0.0.0.0 mask 0.0.0.0 vpn interface but ipconfig shows me 10.0.0.50 with 255.255.255.255 and 0.0.0.0 GW After that I cannot get any traffic out. Best regards -- Or Elimelech System Administrator Mail: o...@xwise.com Tel. +97237553300 ext. 2212 M. +972543266051 ___ The sender of this email is not authorized to bind XWise Marketing or any of its affiliate companies (hereby: the Companies) or to make any representations, contracts, or commitments on behalf of the Companies. The information contained in this communication is intended solely for the use of the individual or entity to whom it is addressed and others authorized to receive it. It may contain confidential or legally privileged information. If you are not the intended recipient you are hereby notified that any disclosure, copying, distribution or taking any action in reliance on the contents of this information is strictly prohibited and may be unlawful. If you have received this communication in error, please notify us immediately by forwarding this email to le...@xwise.com and then delete it from your system. The Companies are neither liable for the proper and complete transmission of the information contained in this communication nor for any delay in its receipt.
Re: spamd in blacklist only mode
On Sun, Dec 08, 2013 at 07:59:48PM +0100, Maurice Janssen wrote: Hi, If I understand the man pages correctly, you should start both spamd and spamd-setup with the -b option when you want to use spamd in blacklist only mode. In /etc/rc.d/spamd, the -b option is set when you have spamd_black=yes in your rc.conf.local. However, spamd-setup is always started with -D only from /etc/rc. It doesn't check for the spamd_black environment variable and therefore set -b. So it seems that you have to adapt /etc/rc when you want to run spamd in blacklist only mode. This seems a bit odd, doesn't it? Am I missing something, or is this intended? Thanks, Maurice you shouldn;t have to mess about with the rc.d stuff at all. you run spamd with the -b flag on the command line, or set spamd_black in rc.conf.local. then, following through the man page: spamd-setup(8) should be run periodically by cron(8). When run in blacklist-only mode, the -b flag should be specified. Use crontab(1) to uncomment the entry in root's crontab. hope that's clear. jmc
