Re: Quick APU2 review

[Raul Miller]

On Mon, Apr 18, 2016 at 12:02 AM, Eric Furman  wrote:
> These requests for 'Real World' numbers are almost always
> stupid, because the people asking are almost certain to never
> need the max amount of bandwidth even a modest machine
> can supply. Really? Are you actually considering this box
> for use at the telecommunications provider you work for?

Mm... I think you should have left out this paragraph.

(1) It's true: technically most people really do not "need" computers.
Some food, and a place to sleep - those are things people actually
need.

(2) That said, there are other circumstances where bandwidth or
throughput might matter to someone's opinion of how well they are
doing (for example when they have to deal with a number of local
machines -- perhaps because they are working with groups of other
people, or perhaps because they have a variety of machines at home --
and are moving large things between these machines).

(3) Machine performance can matter even when neither bandwidth nor
throughput is a bottleneck, if the machine is multipurpose.

(4) Being stupid should be thought of as a part of the learning
process - something to get over, certainly, but an aspect of something
everyone has to go through.

And, I imagine I am being stupid, here, myself - since I have nothing
to contribute about the actual performance of any APU2 machines. So:
if you want to tell me about how stupid I am, please do it by emailing
me directly, and do not burden this list with your reactions to my
stupidity.

Thanks,

-- 
Raul

Re: Quick APU2 review

[Eric Furman]

On Sun, Apr 17, 2016, at 08:26 PM, Stuart Henderson wrote:
> On 2016-04-15, Daniel Ouellet  wrote:
> >> That's nice.  I don't have a ferrari, I have a rather basic truck.
> >> 
> >> You are off topic.
> >
> > Sorry Theo,
> >
> > He asked for
> >
> > "real world through put?"
> >
> > I provided some to be helpful.
> 
> From a different machine though. Compared to APU1 the APU2 has 4x the L2
> cache, RAM is clocked a quarter faster, twice the number of cpu cores,
> and a few more cpu features (e.g. AES-NI, RDRAND). On the downside the
> bios is still a bit in flux (note it should be possible to flash from
> OpenBSD, but you need a patched version of pciutils).
> 
> It depends on the workload but in certain cases these changes will make
> a huge difference.
> 

But his point is still valid. He knew he had an inferior machine
but it was still able to saturate a 150Mb/s line. That means
unless the person asking for throughput data is using a 
DS4/NA then he probably will be Okay.
These requests for 'Real World' numbers are almost always
stupid, because the people asking are almost certain to never
need the max amount of bandwidth even a modest machine
can supply. Really? Are you actually considering this box
for use at the telecommunications provider you work for?

remove password advice in afterboot.8 and passwd.1

[Rob Pierce]

Stop giving password advice. Instead, make a general statement about password
strength in passwd.1.

Rob

Index: afterboot.8
===
RCS file: /cvs/src/share/man/man8/afterboot.8,v
retrieving revision 1.153
diff -u -p -r1.153 afterboot.8
--- afterboot.8 8 Dec 2015 13:36:05 -   1.153
+++ afterboot.8 18 Apr 2016 03:18:04 -
@@ -103,10 +103,6 @@ Change the password for the root user.
 (Note that throughout the documentation, the term
 .Dq superuser
 is a synonym for the root user.)
-Choose a password that has digits and special characters
-as well as from the upper and lower case alphabet.
-Do not choose any word in any language.
-It is common for an intruder to use dictionary attacks.
 Type the following command to change it:
 .Pp
 .Dl $ doas passwd root
@@ -594,6 +590,7 @@ is contained within
 .Xr doas 1 ,
 .Xr ksh 1 ,
 .Xr man 1 ,
+.Xr passwd 1 ,
 .Xr pkg_add 1 ,
 .Xr ps 1 ,
 .Xr vi 1 ,

Index: passwd.1
===
RCS file: /cvs/src/usr.bin/passwd/passwd.1,v
retrieving revision 1.44
diff -u -p -r1.44 passwd.1
--- passwd.126 Nov 2015 19:01:47 -  1.44
+++ passwd.118 Apr 2016 03:18:42 -
@@ -49,13 +49,10 @@ First, the user is prompted for their cu
 If the current password is correctly typed, a new password is requested.
 The new password must be entered twice to avoid typing errors.
 .Pp
-The new password should be at least six characters long and not
-purely alphabetic.
-Its total length must be less than
+Password strength is a function of length and complexity.
+The total password length must be less than
 .Dv _PASSWORD_LEN
 (currently 128 characters).
-A mixture of both lower and uppercase letters, numbers, and
-meta-characters is encouraged.
 .Pp
 The quality of the password can be enforced by specifying an external
 checking program via the

Re: man pages diff

[Rob Pierce]

> From: "Alexander Hall" 
> To: "Jason McIntyre" , "misc" 
> Cc: "Ingo Schwarze" 
> Sent: Saturday, April 9, 2016 4:15:10 AM
> Subject: Re: man pages diff

> On April 7, 2016 10:40:24 PM GMT+02:00, Jason McIntyre 
> wrote:
> >On Thu, Apr 07, 2016 at 10:13:02PM +0200, Ingo Schwarze wrote:
> >> Hi,

> >> Jason McIntyre wrote on Thu, Apr 07, 2016 at 08:35:52PM +0100:
> >> > On Thu, Apr 07, 2016 at 03:15:01PM -0400, Rob Pierce wrote:

> >> >> Change "super user" to "superuser".

> >> > hmm. you have the weight of the man pages behind you, since they
> >> > overwhelmingly use "superuser".

> >> In that case, ...

> >> > the trouble is, i don;t think "super
> >> > user" is wrong, and i'm reluctant to do this...

I just noticed this in afterboot.1 under the "Root password" section:

"Note that throughout the documentation, the term "superuser" is a synonym for
the root user."

Rob

Re: Quick APU2 review

[Stuart Henderson]

On 2016-04-15, Daniel Ouellet  wrote:
>> That's nice.  I don't have a ferrari, I have a rather basic truck.
>> 
>> You are off topic.
>
> Sorry Theo,
>
> He asked for
>
> "real world through put?"
>
> I provided some to be helpful.

>From a different machine though. Compared to APU1 the APU2 has 4x the L2
cache, RAM is clocked a quarter faster, twice the number of cpu cores,
and a few more cpu features (e.g. AES-NI, RDRAND). On the downside the
bios is still a bit in flux (note it should be possible to flash from
OpenBSD, but you need a patched version of pciutils).

It depends on the workload but in certain cases these changes will make
a huge difference.

Re: Quick APU2 review

[Stuart Henderson]

On 2016-04-15, Heine Lysemose  wrote:
> Can you give some real world through put? How much can you push through it
> from a NAT’et device? And what is the device stats when doing so?

This depends on several things. IPsec or not (and how is it configured).
pppoe or routing or bridging. kern.pool_debug or not. PF rulesets. Packet sizes.

Re: Upgrade to 5.9 full disk encryption

[Sean Howard]

 J o ‎l

Sent from my Phone.
  Original Message  
From: Predrag Punosevap
‎
Sent: Sunday, April 17, 2016 09:11
To: erling.westen...@gmail.com
Cc: misc@openbsd.org
Subject: Re: Upgrade to 5.m. J9 full disk encryption

Erling Westenvik  wrote:
Tn. I‎
> On Sat, Apr 16, 2016 at 11:02:36PM -0400, Predrag Punosevac wrote:
> > Bryan Everly wrote:
> > >
> > > Boot the installer. Exit to the shell. Then do:
> > >
> > > bioctl -c C -l /dev/sd0a softraid0
> > >
> >
> > Unless I did something really stupid I would swear that I upgraded fully
> > encrypted laptop running 5.8 to 5.9 easier.
> >
> > I downloaded bsd.rd for 5.9 and put into /. Then I rebooted the laptop.
> > When prompted for boot password and entered it. Then I booted from
> > bsd.rd and chose the upgrade option. When upgrade manager asked me what
> > is the installation disk I pointed it to the crypto disk. In my case
> > physical device is
> >
> > /dev/sd0
> >
> > and crypto device is /dev/sd1
> >
> > No softraid passwords were needed.
>
> Actually it was but you referred to it as "boot password" above,
> something which may sound confusing to new users. The correct term would
> be "passphrase". There is no such thing as a "boot password" unless one
> refers to the machine's BIOS password.
>
> After downloading a ramdisk (bsd.rd) kernel and after rebooting, I prefer
> to exit to the boot(8) prompt when it asks for the passphrase:
>
> Using drive 0, partition 3.
> Loading.
> probing: pc0 apm pci mem[639K 254M a20=on]
> disk: hd0+ sr0*
> >> OpenBSD/i386 BOOT 3.21
> Passphrase: 
> ^^
> Then I enter:
>
> boot> boot sr0a:/bsd.rd
> ^
> And the passphrase:
>
> Passphrase: 
> 
> I easily get distracted and this way I make sure that the system doesn't
> start with the old system (bsd) kernel in case I miss the five second
> delay offered by boot(8). Having to wait for a system to finish booting
> just so you can log in and reboot again, can be an annoying waste of
> time.. :-)
>
> Regards,
>
> Erling

Hi Erling,

Thanks for posting. I was very tired when I sent the original message
and reading it over this morning I sounded like a drunken mathematician.
Of course one has to enter the passphrase. The only step I avoided
comparing to the original post was dropping into the shell before
starting the upgrade process. For the people who might be reading these
posts I was explicitly to state that I don't use a password to protect
my BIOS.

Predrag


>
> > After upgrade was finished I booted
> > into 5.9 and did usual sysmerge, cleaning files and upgrading packages.
> >
> > Best,
> > Predrag

[demime 1.01d removed an attachment of type image/png]

[demime 1.01d removed an attachment of type application/octet-stream]

[demime 1.01d removed an attachment of type application/octet-stream]

Re: jabber client with conference history saving

[Mark Carroll]

On 17 Apr 2016, Joseph Oficre wrote:

> Can someone give me an advice about xmpp client on OpenBSD, Im using Psi
> for now, but it doesnt save messages history properly (errors only).
> So i want to try another one.
> Doesnt matter if console or gui, just with chatroom/private chats history
> saving ability.

On the console irssi is pretty featureful and the irssi-xmpp plugin is
packaged for OpenBSD. That's been working well for me.

pidgin's always an option if you prefer GUI. I think I used to save all
chat logs with that.

-- Mark

Re: jabber client with conference history saving

[Solène Rapenne]

Le 2016-04-17 21:42, Joseph Oficre a écrit :

Hello, @misc.
Can someone give me an advice about xmpp client on OpenBSD, Im using 
Psi

for now, but it doesnt save messages history properly (errors only).
So i want to try another one.
Doesnt matter if console or gui, just with chatroom/private chats 
history

saving ability.

OpenBSD-current.


Hello,

I am using emacs with jabber.el as xmpp client and it works pretty well.
You can configure it to log history of chats and groupchats as explained 
here : 
http://emacs-jabber.sourceforge.net/manual-0.8.0/Message-history.html#Message-history


Kind regards

jabber client with conference history saving

[Joseph Oficre]

Hello, @misc.
Can someone give me an advice about xmpp client on OpenBSD, Im using Psi
for now, but it doesnt save messages history properly (errors only).
So i want to try another one.
Doesnt matter if console or gui, just with chatroom/private chats history
saving ability.

OpenBSD-current.

Re: library-specs(7) erratum

[Jason McIntyre]

On Sat, Apr 16, 2016 at 01:44:27AM -0600, Bob NW8L wrote:
> Hello,
> 
> Now that architectures without shared libraries aren't supported [1],
> shouldn't the reference to them should be removed from library-specs(7)?
> 

fixed, thanks.
jmc

> Index: library-specs.7
> ===
> RCS file: /cvs/src/share/man/man7/library-specs.7,v
> retrieving revision 1.11
> diff -u -p -r1.11 library-specs.7
> --- library-specs.7 27 Sep 2015 14:27:52 -  1.11
> +++ library-specs.7 16 Apr 2016 07:18:00 -
> @@ -92,16 +92,6 @@ If a specific major number is needed, us
>  If the minor component is left empty, any minor will do.
>  If both components are left empty, any version will do.
>  .Pp
> -If a given architecture does not support shared libraries, all
> -.Ev LIB_DEPENDS
> -will be turned into simple
> -.Ev BUILD_DEPENDS
> -checks, and so,
> -failure to mention
> -.Ev RUN_DEPENDS
> -if the port needs anything beyond libraries from the dependent port will
> -lead to strange errors on such architectures.
> -.Pp
>  Most specifications won't mention a
>  .Pa path :
>  .Xr resolve-lib 1
> 
> [1] http://article.gmane.org/gmane.os.openbsd.cvs/154333

Re: new

[Ingo Schwarze]

Hi,

Tito Mari Francis Escano wrote on Sat, Apr 16, 2016 at 11:28:29PM +0800:

> 0
> C Philippines
> P National Capital Region
> T Taguig City
> Z 1633
> O EDGEKIT Computer Systems
> I Tito Mari Francis H. Escano
> A Block 1 Lot 24 Zone 1 Central Bicutan
> M titomarifran...@edgekit.com
> U http://www.edgekit.com/
> B +63 916 640 2020

Committed.

Good luck for your projects!
  Ingo


> X N/A
> N EDGEKIT Computer Systems is proudly the only company in the Philippines
> that provides professional support, consultancy and training services on
> OpenBSD and PostgreSQL, the best in their class free and open source
> enterprise platforms.
> 
> EDGEKIT Computer Systems provides small and medium scale businesses
> with simple, secure and functional solutions built on our  href='http://www.edgekit.com/p/our-offerings_6.html'>Weapon of
> Choice selection of secure platforms, tools, methodologies and
> resources to give them the competitive edge.

P.S.
I shortened the desciption a bit, though, cutting it down to
substantial information and dropping arguable claims and buzzwords.
No other company has two paragraphs of notes, and there does appear
to be one other OpenBSD consultant in the National Capital Region
- not sure whether he regards himself as as a company, but let's
simply avoid any possible argument over it.

Re: smtpd : reject with a message

[Gilles Chehade]

On Wed, Apr 13, 2016 at 06:14:36PM +, Peter Fraser wrote:
> Is there any method of added extra information when rejecting an email with
> smtpd
> 
> I am looking for an equivalent effect to the .REDIRECT or error  message in
> sendmail's virtualusertable
> 
> for example I had the following in sendmail's virtualusertable.
> 
> @thinkage.on.ca   error:5.1.1:553 " Please use 
> thinkage.ca not
> thinkage.on.ca"
> 
> and
> 
> t...@thinkage.ca  supp...@thinkage.ca.REDIRECT
> 

from aliases(5):

 error:code message
 
A status code and message to return.  The code must be 3 digits,
starting 4XX (TempFail) or 5XX (PermFail).  The message must be
present and can be freely chosen.

note that only single-line messages are supported (for now ?)


-- 
Gilles Chehade

https://www.poolp.org  @poolpOrg

Re: openbsd vs freebsd NAT performance

[Rick Hanson]

> hmm ... in the end i see two big "problems" of OpenBSD:
> a) SMP of network stack/pf.
> b) a modern file system like ZFS or Hammer.

Yay!  I just won a bet (from a friend of mine) that this was going to
turn into a troll.  Thanks for the confirmation, dude!  (My friend is
not happy with you, though. ;)

[patch] bgpctl more info in terse format

[Denis Fondras]

Hello,

When monitoring my bgpd, I need to check the session duration and the number of
prefixes. Here is a patch that add these informations to "bgpctl show sum
terse"

Before :
# bgpctl show sum terse
10.20.30.254 65003 Established

After :
# bgpctl show sum terse
10.20.30.254 65003 Established 10 3

Denis


Index: bgpctl/bgpctl.c
===
RCS file: /cvs/src/usr.sbin/bgpctl/bgpctl.c,v
retrieving revision 1.187
diff -u -p -r1.187 bgpctl.c
--- bgpctl/bgpctl.c 5 Dec 2015 13:17:05 -   1.187
+++ bgpctl/bgpctl.c 17 Apr 2016 15:55:59 -
@@ -186,11 +186,9 @@ main(int argc, char *argv[])
/* NOTREACHED */
case SHOW:
case SHOW_SUMMARY:
-   imsg_compose(ibuf, IMSG_CTL_SHOW_NEIGHBOR, 0, 0, -1, NULL, 0);
show_summary_head();
-   break;
case SHOW_SUMMARY_TERSE:
-   imsg_compose(ibuf, IMSG_CTL_SHOW_TERSE, 0, 0, -1, NULL, 0);
+   imsg_compose(ibuf, IMSG_CTL_SHOW_NEIGHBOR, 0, 0, -1, NULL, 0);
break;
case SHOW_FIB:
if (!res->addr.aid) {
@@ -584,8 +582,9 @@ show_summary_terse_msg(struct imsg *imsg
p = imsg->data;
s = fmt_peer(p->conf.descr, >conf.remote_addr,
p->conf.remote_masklen, nodescr);
-   printf("%s %s %s\n", s, log_as(p->conf.remote_as),
-   p->conf.template ? "Template" : statenames[p->state]);
+   printf("%s %s %s %llu %u\n", s, log_as(p->conf.remote_as),
+   p->conf.template ? "Template" : statenames[p->state],
+   (time(NULL) - p->stats.last_updown), p->stats.prefix_cnt);
free(s);
break;
case IMSG_CTL_END:
Index: bgpd/bgpd.h
===
RCS file: /cvs/src/usr.sbin/bgpd/bgpd.h,v
retrieving revision 1.292
diff -u -p -r1.292 bgpd.h
--- bgpd/bgpd.h 6 Nov 2015 16:23:26 -   1.292
+++ bgpd/bgpd.h 17 Apr 2016 15:55:59 -
@@ -374,7 +374,6 @@ enum imsg_type {
IMSG_CTL_SHOW_RIB_COMMUNITY,
IMSG_CTL_SHOW_NETWORK,
IMSG_CTL_SHOW_RIB_MEM,
-   IMSG_CTL_SHOW_TERSE,
IMSG_CTL_SHOW_TIMER,
IMSG_CTL_LOG_VERBOSE,
IMSG_CTL_SHOW_FIB_TABLES,
Index: bgpd/control.c
===
RCS file: /cvs/src/usr.sbin/bgpd/control.c,v
retrieving revision 1.82
diff -u -p -r1.82 control.c
--- bgpd/control.c  5 Dec 2015 18:28:04 -   1.82
+++ bgpd/control.c  17 Apr 2016 15:55:59 -
@@ -245,7 +245,6 @@ control_dispatch_msg(struct pollfd *pfd,
case IMSG_CTL_SHOW_RIB_MEM:
case IMSG_CTL_SHOW_RIB_COMMUNITY:
case IMSG_CTL_SHOW_NETWORK:
-   case IMSG_CTL_SHOW_TERSE:
case IMSG_CTL_SHOW_TIMER:
break;
default:
@@ -306,12 +305,6 @@ control_dispatch_msg(struct pollfd *pfd,
imsg_ctl_rde(IMSG_CTL_END, imsg.hdr.pid,
NULL, 0);
}
-   break;
-   case IMSG_CTL_SHOW_TERSE:
-   for (p = peers; p != NULL; p = p->next)
-   imsg_compose(>ibuf, IMSG_CTL_SHOW_NEIGHBOR,
-   0, 0, -1, p, sizeof(struct peer));
-   imsg_compose(>ibuf, IMSG_CTL_END, 0, 0, -1, NULL, 0);
break;
case IMSG_CTL_FIB_COUPLE:
case IMSG_CTL_FIB_DECOUPLE:

Re: openbsd vs freebsd NAT performance

[Mihai Popescu]

> So, please can you say me how to activate SMP pf support in OpenBSD ?

You can write the code for SMP, test and compile it at home, then send
it to the project for commit. The other way is sponsor someone to
write it.

> hmm ... in the end i see two big "problems" of OpenBSD:
> a) SMP of network stack/pf.
> b) a modern file system like ZFS or Hammer.

Somebody lied to you. There is no problem with OpenBSD, it is doing fine.

Re: amd5.9 mp softdep bufcachepercent

[Zé Loff]

On Sun, Apr 17, 2016 at 12:43:27AM -0400, Predrag Punosevac wrote:
> I rm -rf /usr/ports on the newly upgraded laptop running generic 5.9 amd
> MP kernel. /usr is mounted with the option softdep. It took ages for rm
> to finish. Laptop has 4GB of RAM. The HDD is SSD with the capacity 931
> GB and fully encrypted.
> 
> Playing little bit with 
> 
> sysctl bufcacheparcent
> 
> and  BUFCACHEPERCENT in 
> 
> /sys/conf/param.c
> 
> I noticed that it is at least somewhat faster using value 10 instead of
> default value 20. Has anybody noticed anything strange with rm and du -h
> -s on the directories with lots of small files. Any suggestions how to
> speed things up?
> 
> Predrag

I don't know if you have enough unallocated space to do it, but this is
why it's recommended to have /usr/ports (and /usr/src, and maybe
/usr/ports/pobj, etc) as separate partitions: newfs is much quicker than
rm -rf. If you have enough room left in your disks you can throw in an
extra partition and mount /usr/ports there (incidentally this is also
why sometimes it's a good idea to leave some free space when setting up
your disks in the first place, in case you find out you need an extra
partition later on).

-- 

Re: assigning ipv6 addresses to interfaces

[LÉVAI Dániel]

Stuart Henderson @ 2016-02-01T11:44:49 +0100:
> On 2016-02-01, LÉVAI Dániel  wrote:
> > Interesting. I even tried to specifically request a prefix with
> > ia_pd 1/::/64 [...]
> > ... but alas it didn't make any difference.
> > 
> > Could it be that this is the error of dhcpcd's implementation of the
> > request, and not the ISP's? Before I try the customer services, I just
> > want to make sure this is not PEBKAC.
> 
> I think the ISP are probably only handing out one /64, and while I'm
> not sure how dhcpcd copes in that situation (you could ask on the dhcpcd
> mailing list), it's probably doing the best it can under the conditions
> (but not good enough for SLAAC).
> 
> Our tcpdump(8) doesn't decode dhcpv6 but if you use e.g. wireshark
> you'll see something like this in the ISP's reply,
> 
> # tshark -i pppoe1 -V port 546 or port 547
> [...]
> Identity Association for Prefix Delegation
> Option: Identity Association for Prefix Delegation (25)
> Length: 41
> Value: 0002001a0019...
> IAID: 0002
> T1: infinity
> T2: infinity
> IA Prefix
> Option: IA Prefix (26)
> Length: 25
> Value: 302a028011700300...
> Preferred lifetime: infinity
> Valid lifetime: infinity
> Prefix length: 48
> Prefix address: 2a02:8011:7003::
> 
> And in your case I think it will probably have "Prefix length: 64".
> If so, I'd start by asking the ISP if they can configure things to
> let you have a /48 or /56.

And that is exactly what's happening.
However, with dhcpcd 6.10.1, I could get away with configuring
`ia_pd 1 em1/0`, and just distributing my /64, upgrading the port to
6.10.2 resulted in this:

Issue:
http://roy.marples.name/projects/dhcpcd/info/7461677bd0

Patch:
http://roy.marples.name/projects/dhcpcd/info/59cdbb6e777c4bec

I'm currently using that patch on top of the 6.10.2 port from -current,
and getting the same result as before.

(Just in case someone will run into this)


Daniel

-- 
LÉVAI Dániel
PGP key ID = 0x83B63A8F
Key fingerprint = DBEC C66B A47A DFA2 792D  650C C69B BE4C 83B6 3A8F

Re: diff for help.1

[Jason McIntyre]

On Fri, Apr 15, 2016 at 07:42:05PM -0400, Rob Pierce wrote:
> On Fri, Apr 15, 2016 at 04:16:59PM -0400, Rob Pierce wrote:
> > Recent FAQ cleanup lost a reference to mg(1) (section 2.2).
> > 
> > Text editors seem fundamental enough to include in help.1.
> > 
> > While here, make consistent use of references to command arguments (Ar).
> > 
> > Rob
> 
> Sorry - clean diff with stray comments removed.
> 
> Rob
> 

committed, thanks.
jmc

> Index: help.1
> ===
> RCS file: /cvs/src/share/man/man1/help.1,v
> retrieving revision 1.1
> diff -u -p -r1.1 help.1
> --- help.127 Mar 2015 01:59:26 -  1.1
> +++ help.115 Apr 2016 23:40:33 -
> @@ -88,7 +88,7 @@ in the system password file
>  .It Cm man
>  Interface to the system manual pages.
>  For any of the commands listed below, type
> -.Ic man 
> +.Ic man Ar command
>  for detailed information on what it does and how to use it.
>  .It Cm pwd
>  Print working directory.
> @@ -109,12 +109,18 @@ Type
>  for a detailed listing.
>  .It Cm cat
>  Although it has many more uses,
> -.Ic cat filename
> +.Ic cat Ar filename
>  will print the contents of a plain-text file to the screen.
> +.It Cm vi
> +Edit text files.
> +For example,
> +.Ic vi Ar filename .
> +See also
> +.Xr mg 1 .
>  .It Cm mkdir
>  Make a directory.
>  For example,
> -.Ic mkdir foobar .
> +.Ic mkdir Ar dirname .
>  .It Cm rmdir
>  Remove a directory.
>  .It Cm rm

Re: Upgrade to 5.9 full disk encryption

[Predrag Punosevac]

Erling Westenvik  wrote:

> On Sat, Apr 16, 2016 at 11:02:36PM -0400, Predrag Punosevac wrote:
> > Bryan Everly wrote:
> > > 
> > > Boot the installer. Exit to the shell. Then do:
> > > 
> > > bioctl -c C -l /dev/sd0a softraid0
> > >
> > 
> > Unless I did something really stupid I would swear that I upgraded fully
> > encrypted laptop running 5.8 to 5.9 easier. 
> > 
> > I downloaded bsd.rd for 5.9 and put into /. Then I rebooted the laptop.
> > When prompted for boot password and entered it. Then I booted from
> > bsd.rd and chose the upgrade option. When upgrade manager asked me what
> > is the installation disk I pointed it to the crypto disk. In my case
> > physical device is
> > 
> > /dev/sd0
> > 
> > and crypto device is /dev/sd1
> > 
> > No softraid passwords were needed.
> 
> Actually it was but you referred to it as "boot password" above,
> something which may sound confusing to new users. The correct term would
> be "passphrase". There is no such thing as a "boot password" unless one
> refers to the machine's BIOS password.
> 
> After downloading a ramdisk (bsd.rd) kernel and after rebooting, I prefer
> to exit to the boot(8) prompt when it asks for the passphrase:
> 
> Using drive 0, partition 3.
> Loading.
> probing: pc0 apm pci mem[639K 254M a20=on]
> disk: hd0+ sr0*
> >> OpenBSD/i386 BOOT 3.21
> Passphrase: 
> ^^
> Then I enter:
> 
> boot> boot sr0a:/bsd.rd
>   ^
> And the passphrase:
> 
> Passphrase: 
> 
> I easily get distracted and this way I make sure that the system doesn't
> start with the old system (bsd) kernel in case I miss the five second
> delay offered by boot(8). Having to wait for a system to finish booting
> just so you can log in and reboot again, can be an annoying waste of
> time.. :-)
> 
> Regards,
> 
> Erling

Hi Erling,

Thanks for posting. I was very tired when I sent the original message
and reading it over this morning I sounded like a drunken mathematician.
Of course one has to enter the passphrase. The only step I avoided
comparing to the original post was dropping into the shell before
starting the upgrade process. For the people who might be reading these
posts I was explicitly to state that I don't use a password to protect
my BIOS.

Predrag


> 
> >After upgrade was finished I booted
> > into 5.9 and did usual sysmerge, cleaning files and upgrading packages.
> > 
> > Best,
> > Predrag

Re: owncloud - external files directory

[Joseph Oficre]

It sounds really nice, ill try, thank you a lot!

2016-04-17 15:07 GMT+03:00 Erling Westenvik :

> On Sun, Apr 17, 2016 at 02:20:23PM +0300, Joseph Oficre wrote:
> > I want to store all my files centralized. I have some windows pc's at
> home,
> > some notebooks and my work laptop. So i want to be able to put and take
> the
> > files from any of this PC's. But /var/ partition only 100gb size, so i
> > think it's good idea to move datadir to /home/ partition(or even to
> > external large disk, that i can just put in my pocket)
>
> Then I would recommend an external disk and mount it somewhere inside
> the chroot, like /var/www/data. I have a setup like that on an old
> OpenBSD server running owncloud version 6-or-something.
>
> $ cat /etc/fstab | grep data
> f1e6a6c8d1b4fc94.p /var/www/data ffs rw,nodev,nosuid 1 2
>
> $ mount
> ...
> /dev/sd3p on /var/www/data type ffs (local, nodev, nosuid)
> ...
>
> Regards,
>
> Erling
>
> >
> > 2016-04-17 14:12 GMT+03:00 Erling Westenvik  >:
> >
> > > On Sun, Apr 17, 2016 at 12:40:59PM +0300, Joseph Oficre wrote:
> > > > Hello misc.
> > > > I've installed ownCloud with this guide
> > > >
> > >
> https://github.com/reyk/httpd/wiki/Running-ownCloud-with-httpd-on-OpenBSD
> > > >
> > > > Everything looks fine, but i want to store all my files not in
> > > > /var/www/owncloud/data but in /home/USER/owncloud/data/
> > > > Moving datadir to home and reconfiguring config/config.php
> > > "datadirectory"
> > > > did nothing, only error:
> > >
> > > httpd(8) is chroot(8)'ed to /var/www by default. Your options include:
> > >
> > > - disabling chroot, which isn't a very recommended option, or
> > > - set up /home as the new chroot, which probably isn't a very
> recommended
> > >   option either.
> > >
> > > What are you trying to achive?
> > >
> > > Regards,
> > >
> > > Erling
> > >
> > > >
> > > > PHP message:
> > > >
> > >
> {"reqId":"HMQmV6NKyZ0Af967TUia","remoteAddr":"192.168.0.102","app":"index","message":"Exception:
> > > >
> {\"Exception\":\"DoctrineDBALDBALException\",\"Message\":\"Failed
> > > > to connect to the database: An exception occured in driver:
> > > SQLSTATE[HY000]
> > > > [14] unable to open database file\",\"Code\":0,\"Trace\":\"#0
> > > >
> > >
> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(973):
> > > > OCDBConnection->connect()\\n#1
> > > > \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(203):
> > > > DoctrineDBALConnection->executeUpdate('PRAGMA read_unc...',
> > > Array,
> > > > Array)\\n#2
> > > >
> > >
> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(621):
> > > > OCDBConnection->executeUpdate('PRAGMA read_unc...')\\n#3
> > > > \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(135):
> > > > DoctrineDBALConnection->setTransactionIsolation(2)\\n#4
> > > >
> > >
> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/DriverManager.php(172):
> > > > OCDBConnection->__cons...
> > > > PHP message:
> > > >
> > >
> {"reqId":"HMQmV6NKyZ0Af967TUia","remoteAddr":"192.168.0.102","app":"core","message":"Exception:
> > > >
> {\"Exception\":\"DoctrineDBALDBALException\",\"Message\":\"Failed
> > > > to connect to the database: An exception occured in driver:
> > > SQLSTATE[HY000]
> > > > [14] unable to open database file\",\"Code\":0,\"Trace\":\"#0
> > > >
> > >
> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(973):
> > > > OCDBConnection->connect()\\n#1
> > > > \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(203):
> > > > DoctrineDBALConnection->executeUpdate('PRAGMA read_unc...',
> > > Array,
> > > > Array)\\n#2
> > > >
> > >
> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(621):
> > > > OCDBConnection->executeUpdate('PRAGMA read_unc...')\\n#3
> > > > \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(135):
> > > > DoctrineDBALConnection->setTransactionIsolation(2)\\n#4
> > > >
> > >
> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/DriverManager.php(172):
> > > > OCDBConnection->__const...
> > > > PHP message:
> > > >
> > >
> {"reqId":"HMQmV6NKyZ0Af967TUia","remoteAddr":"192.168.0.102","app":"core","message":"Exception:
> > > >
> {\"Exception\":\"DoctrineDBALDBALException\",\"Message\":\"Failed
> > > > to connect to the database: An exception occured in driver:
> > > SQLSTATE[HY000]
> > > > [14] unable to open database file\",\"Code\":0,\"Trace\":\"#0
> > > >
> > >
> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(973):
> > > > OCDBConnection->connect()\\n#1
> > > > \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(203):
> > > > DoctrineDBALConnection->executeUpdate('PRAGMA read_unc...',
> > > Array,
> > 

Re: scanner HP scanjet4370 not working

[Maurice McCarthy]

On 2016-04-17 13:03, EdaSky wrote:

I have scanner HP scanjet4370

tested on 5.8 RELEASE and 5.9 GENERIC.MP#1690 i386 with the same 
result


scanner is detected

$ dmesg
OpenBSD 5.9-current (GENERIC.MP) #1690: Thu Mar 31 09:41:46 MDT 2016
   dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Genuine Intel(R) CPU U2500 @ 1.20GHz ("GenuineIntel" 686-class) 
1.20

GHz
...
ugen1 at uhub0 port 5 "hewlett packard hp scanjet" rev 2.00/1.00 addr 
2


$ scanimage -L
device `hp3900:libusb:000:002' is a Hewlett-Packard Scanjet 4370 
flatbed

scanner

But the scan does not work.
When I start previewing or scanning. Head will start move but stops
immediately.

$ scanimage -T
scanimage: scanning image of size 433x590 pixels at 24 bits/pixel
scanimage: acquiring RGB frame, 8 bits/sample
scanimage: reading one scanline, 1299 bytes...  FAIL Error: End of 
file

reached

$ hp-scan
HP Linux Imaging and Printing System (ver. 3.16.3)
Scan Utility ver. 2.2
..
warning: No destinations specified. Adding 'file' destination by 
default.

Using device hp3900:libusb:000:002
Opening connection to device...

Resolution: 300dpi
Mode: gray
Compression: JPEG
Scan area (mm):
 Top left (x,y): (0.00mm, 0.00mm)
 Bottom right (x,y): (220.00mm, 300.00mm)
 Width: 220.00mm
 Height: 300.00mm
Destination(s): file
Output file:
warning: File destination enabled with no output file specified.
Setting output format to PNG for greyscale mode.
warning: Defaulting to '/home/edasky/hpscan001.png'.
Warming up...
Scanning...
Reading data: [\
  ] 0%
error: No data read.
Closing device.

xane the same result.

Please what should I even try?


full debug
$ export SANE_DEBUG_HP3900=4

http://185.47.222.11/scanner-debug.txt


$ pkg_info on snapshot
sane-backends-1.0.25p2
xsane-0.999p2

$ pkg_info on 5.8 release
sane-backends-1.0.24p6
xsane-0.999p2


On Debian linux with sane-backends-1.0.24 and xsane-0.998 works fine.


Don't have OpenBSD here but have you

a) Read /usr/local/share/doc/pkg_readme/cups and any hplip documents?
b) disabled ulpt in the kernel?

Good Luck
Moss

Re: owncloud - external files directory

[Martijn van Duren]

On 04/17/16 13:20, Joseph Oficre wrote:
> I want to store all my files centralized. I have some windows pc's at home,
> some notebooks and my work laptop. So i want to be able to put and take the
> files from any of this PC's. But /var/ partition only 100gb size, so i
> think it's good idea to move datadir to /home/ partition(or even to
> external large disk, that i can just put in my pocket)

You could set chroot voor httpd and php-fpm to /home/USER/owncloud.
This however would mean that both daemons are stuck within that directory.

Keep user-permissions in mind when doing this.

See httpd.conf(5) and /etc/php-fpm.conf.
> 
> 2016-04-17 14:12 GMT+03:00 Erling Westenvik :
> 
>> On Sun, Apr 17, 2016 at 12:40:59PM +0300, Joseph Oficre wrote:
>>> Hello misc.
>>> I've installed ownCloud with this guide
>>>
>> https://github.com/reyk/httpd/wiki/Running-ownCloud-with-httpd-on-OpenBSD
>>>
>>> Everything looks fine, but i want to store all my files not in
>>> /var/www/owncloud/data but in /home/USER/owncloud/data/
>>> Moving datadir to home and reconfiguring config/config.php
>> "datadirectory"
>>> did nothing, only error:
>>
>> httpd(8) is chroot(8)'ed to /var/www by default. Your options include:
>>
>> - disabling chroot, which isn't a very recommended option, or
>> - set up /home as the new chroot, which probably isn't a very recommended
>>   option either.
>>
>> What are you trying to achive?
>>
>> Regards,
>>
>> Erling
>>
>>>
>>> PHP message:
>>>
>> {"reqId":"HMQmV6NKyZ0Af967TUia","remoteAddr":"192.168.0.102","app":"index","message":"Exception:
>>> {\"Exception\":\"DoctrineDBALDBALException\",\"Message\":\"Failed
>>> to connect to the database: An exception occured in driver:
>> SQLSTATE[HY000]
>>> [14] unable to open database file\",\"Code\":0,\"Trace\":\"#0
>>>
>> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(973):
>>> OCDBConnection->connect()\\n#1
>>> \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(203):
>>> DoctrineDBALConnection->executeUpdate('PRAGMA read_unc...',
>> Array,
>>> Array)\\n#2
>>>
>> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(621):
>>> OCDBConnection->executeUpdate('PRAGMA read_unc...')\\n#3
>>> \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(135):
>>> DoctrineDBALConnection->setTransactionIsolation(2)\\n#4
>>>
>> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/DriverManager.php(172):
>>> OCDBConnection->__cons...
>>> PHP message:
>>>
>> {"reqId":"HMQmV6NKyZ0Af967TUia","remoteAddr":"192.168.0.102","app":"core","message":"Exception:
>>> {\"Exception\":\"DoctrineDBALDBALException\",\"Message\":\"Failed
>>> to connect to the database: An exception occured in driver:
>> SQLSTATE[HY000]
>>> [14] unable to open database file\",\"Code\":0,\"Trace\":\"#0
>>>
>> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(973):
>>> OCDBConnection->connect()\\n#1
>>> \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(203):
>>> DoctrineDBALConnection->executeUpdate('PRAGMA read_unc...',
>> Array,
>>> Array)\\n#2
>>>
>> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(621):
>>> OCDBConnection->executeUpdate('PRAGMA read_unc...')\\n#3
>>> \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(135):
>>> DoctrineDBALConnection->setTransactionIsolation(2)\\n#4
>>>
>> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/DriverManager.php(172):
>>> OCDBConnection->__const...
>>> PHP message:
>>>
>> {"reqId":"HMQmV6NKyZ0Af967TUia","remoteAddr":"192.168.0.102","app":"core","message":"Exception:
>>> {\"Exception\":\"DoctrineDBALDBALException\",\"Message\":\"Failed
>>> to connect to the database: An exception occured in driver:
>> SQLSTATE[HY000]
>>> [14] unable to open database file\",\"Code\":0,\"Trace\":\"#0
>>>
>> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(973):
>>> OCDBConnection->connect()\\n#1
>>> \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(203):
>>> DoctrineDBALConnection->executeUpdate('PRAGMA read_unc...',
>> Array,
>>> Array)\\n#2
>>>
>> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(621):
>>> OCDBConnection->executeUpdate('PRAGMA read_unc...')\\n#3
>>> \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(135):
>>> DoctrineDBALConnection->setTransactionIsolation(2)\\n#4
>>>
>> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/DriverManager.php(172):
>>> OCDBConnection->__const...
>>>
>>> PHP message:
>>>
>> {"reqId":"HMQmV6NKyZ0Af967TUia","remoteAddr":"192.168.0.102","app":"PHP","message":"touch():
>>> Unable to create file \/home\/usf\/owncloud\/data\/owncloud.log because
>> No

Re: owncloud - external files directory

[Black Rider]

El Sun, 17 Apr 2016 14:20:23 +0300, Joseph Oficre escribió:

> I want to store all my files centralized. I have some windows pc's at
> home,
> some notebooks and my work laptop. So i want to be able to put and take
> the files from any of this PC's. But /var/ partition only 100gb size, so
> i think it's good idea to move datadir to /home/ partition(or even to
> external large disk, that i can just put in my pocket)

If you only want to upload and download, a more simple protocol such as 
FTP or SFTP might be easier to set and more secure. You can use your /
home for keeping the files easily with those. Nowadays, there are quality 
clients for every popular platform, even in default installs.

If you plan to have much Owncloud service data, your best option is to 
make your /var larger. Seriously. No point in messing with chroot or 
binded mounts, online mounts or whatever if you can just remake the 
filesystem layout.

Re: owncloud - external files directory

[Erling Westenvik]

On Sun, Apr 17, 2016 at 02:20:23PM +0300, Joseph Oficre wrote:
> I want to store all my files centralized. I have some windows pc's at home,
> some notebooks and my work laptop. So i want to be able to put and take the
> files from any of this PC's. But /var/ partition only 100gb size, so i
> think it's good idea to move datadir to /home/ partition(or even to
> external large disk, that i can just put in my pocket)

Then I would recommend an external disk and mount it somewhere inside
the chroot, like /var/www/data. I have a setup like that on an old
OpenBSD server running owncloud version 6-or-something.

$ cat /etc/fstab | grep data
f1e6a6c8d1b4fc94.p /var/www/data ffs rw,nodev,nosuid 1 2

$ mount
...
/dev/sd3p on /var/www/data type ffs (local, nodev, nosuid)
...

Regards,

Erling

> 
> 2016-04-17 14:12 GMT+03:00 Erling Westenvik :
> 
> > On Sun, Apr 17, 2016 at 12:40:59PM +0300, Joseph Oficre wrote:
> > > Hello misc.
> > > I've installed ownCloud with this guide
> > >
> > https://github.com/reyk/httpd/wiki/Running-ownCloud-with-httpd-on-OpenBSD
> > >
> > > Everything looks fine, but i want to store all my files not in
> > > /var/www/owncloud/data but in /home/USER/owncloud/data/
> > > Moving datadir to home and reconfiguring config/config.php
> > "datadirectory"
> > > did nothing, only error:
> >
> > httpd(8) is chroot(8)'ed to /var/www by default. Your options include:
> >
> > - disabling chroot, which isn't a very recommended option, or
> > - set up /home as the new chroot, which probably isn't a very recommended
> >   option either.
> >
> > What are you trying to achive?
> >
> > Regards,
> >
> > Erling
> >
> > >
> > > PHP message:
> > >
> > {"reqId":"HMQmV6NKyZ0Af967TUia","remoteAddr":"192.168.0.102","app":"index","message":"Exception:
> > > {\"Exception\":\"DoctrineDBALDBALException\",\"Message\":\"Failed
> > > to connect to the database: An exception occured in driver:
> > SQLSTATE[HY000]
> > > [14] unable to open database file\",\"Code\":0,\"Trace\":\"#0
> > >
> > \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(973):
> > > OCDBConnection->connect()\\n#1
> > > \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(203):
> > > DoctrineDBALConnection->executeUpdate('PRAGMA read_unc...',
> > Array,
> > > Array)\\n#2
> > >
> > \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(621):
> > > OCDBConnection->executeUpdate('PRAGMA read_unc...')\\n#3
> > > \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(135):
> > > DoctrineDBALConnection->setTransactionIsolation(2)\\n#4
> > >
> > \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/DriverManager.php(172):
> > > OCDBConnection->__cons...
> > > PHP message:
> > >
> > {"reqId":"HMQmV6NKyZ0Af967TUia","remoteAddr":"192.168.0.102","app":"core","message":"Exception:
> > > {\"Exception\":\"DoctrineDBALDBALException\",\"Message\":\"Failed
> > > to connect to the database: An exception occured in driver:
> > SQLSTATE[HY000]
> > > [14] unable to open database file\",\"Code\":0,\"Trace\":\"#0
> > >
> > \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(973):
> > > OCDBConnection->connect()\\n#1
> > > \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(203):
> > > DoctrineDBALConnection->executeUpdate('PRAGMA read_unc...',
> > Array,
> > > Array)\\n#2
> > >
> > \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(621):
> > > OCDBConnection->executeUpdate('PRAGMA read_unc...')\\n#3
> > > \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(135):
> > > DoctrineDBALConnection->setTransactionIsolation(2)\\n#4
> > >
> > \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/DriverManager.php(172):
> > > OCDBConnection->__const...
> > > PHP message:
> > >
> > {"reqId":"HMQmV6NKyZ0Af967TUia","remoteAddr":"192.168.0.102","app":"core","message":"Exception:
> > > {\"Exception\":\"DoctrineDBALDBALException\",\"Message\":\"Failed
> > > to connect to the database: An exception occured in driver:
> > SQLSTATE[HY000]
> > > [14] unable to open database file\",\"Code\":0,\"Trace\":\"#0
> > >
> > \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(973):
> > > OCDBConnection->connect()\\n#1
> > > \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(203):
> > > DoctrineDBALConnection->executeUpdate('PRAGMA read_unc...',
> > Array,
> > > Array)\\n#2
> > >
> > \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(621):
> > > OCDBConnection->executeUpdate('PRAGMA read_unc...')\\n#3
> > > \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(135):
> > > DoctrineDBALConnection->setTransactionIsolation(2)\\n#4
> > >
> > 

Re: Upgrade to 5.9 full disk encryption

[Erling Westenvik]

On Sat, Apr 16, 2016 at 11:02:36PM -0400, Predrag Punosevac wrote:
> Bryan Everly wrote:
> > 
> > Boot the installer. Exit to the shell. Then do:
> > 
> > bioctl -c C -l /dev/sd0a softraid0
> >
> 
> Unless I did something really stupid I would swear that I upgraded fully
> encrypted laptop running 5.8 to 5.9 easier. 
> 
> I downloaded bsd.rd for 5.9 and put into /. Then I rebooted the laptop.
> When prompted for boot password and entered it. Then I booted from
> bsd.rd and chose the upgrade option. When upgrade manager asked me what
> is the installation disk I pointed it to the crypto disk. In my case
> physical device is
> 
> /dev/sd0
> 
> and crypto device is /dev/sd1
> 
> No softraid passwords were needed.

Actually it was but you referred to it as "boot password" above,
something which may sound confusing to new users. The correct term would
be "passphrase". There is no such thing as a "boot password" unless one
refers to the machine's BIOS password.

After downloading a ramdisk (bsd.rd) kernel and after rebooting, I prefer
to exit to the boot(8) prompt when it asks for the passphrase:

Using drive 0, partition 3.
Loading.
probing: pc0 apm pci mem[639K 254M a20=on]
disk: hd0+ sr0*
>> OpenBSD/i386 BOOT 3.21
Passphrase: 
^^
Then I enter:

boot> boot sr0a:/bsd.rd
  ^
And the passphrase:

Passphrase: 

I easily get distracted and this way I make sure that the system doesn't
start with the old system (bsd) kernel in case I miss the five second
delay offered by boot(8). Having to wait for a system to finish booting
just so you can log in and reboot again, can be an annoying waste of
time.. :-)

Regards,

Erling

>After upgrade was finished I booted
> into 5.9 and did usual sysmerge, cleaning files and upgrading packages.
> 
> Best,
> Predrag

Re: openbsd vs freebsd NAT performance

[bluesun08]

hmm ... in the end i see two big "problems" of OpenBSD:
a) SMP of network stack/pf.
b) a modern file system like ZFS or Hammer.



--
View this message in context: 
http://openbsd-archive.7691.n7.nabble.com/openbsd-vs-freebsd-NAT-performance-tp294095p294143.html
Sent from the openbsd user - misc mailing list archive at Nabble.com.

scanner HP scanjet4370 not working

[EdaSky]

I have scanner HP scanjet4370

tested on 5.8 RELEASE and 5.9 GENERIC.MP#1690 i386 with the same result

scanner is detected

$ dmesg
OpenBSD 5.9-current (GENERIC.MP) #1690: Thu Mar 31 09:41:46 MDT 2016
   dera...@i386.openbsd.org:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Genuine Intel(R) CPU U2500 @ 1.20GHz ("GenuineIntel" 686-class) 1.20
GHz
...
ugen1 at uhub0 port 5 "hewlett packard hp scanjet" rev 2.00/1.00 addr 2

$ scanimage -L
device `hp3900:libusb:000:002' is a Hewlett-Packard Scanjet 4370 flatbed
scanner

But the scan does not work.
When I start previewing or scanning. Head will start move but stops
immediately.

$ scanimage -T
scanimage: scanning image of size 433x590 pixels at 24 bits/pixel
scanimage: acquiring RGB frame, 8 bits/sample
scanimage: reading one scanline, 1299 bytes...  FAIL Error: End of file
reached

$ hp-scan
HP Linux Imaging and Printing System (ver. 3.16.3)
Scan Utility ver. 2.2
..
warning: No destinations specified. Adding 'file' destination by default.
Using device hp3900:libusb:000:002
Opening connection to device...

Resolution: 300dpi
Mode: gray
Compression: JPEG
Scan area (mm):
 Top left (x,y): (0.00mm, 0.00mm)
 Bottom right (x,y): (220.00mm, 300.00mm)
 Width: 220.00mm
 Height: 300.00mm
Destination(s): file
Output file:
warning: File destination enabled with no output file specified.
Setting output format to PNG for greyscale mode.
warning: Defaulting to '/home/edasky/hpscan001.png'.
Warming up...
Scanning...
Reading data: [\
  ] 0%
error: No data read.
Closing device.

xane the same result.

Please what should I even try?


full debug
$ export SANE_DEBUG_HP3900=4

http://185.47.222.11/scanner-debug.txt


$ pkg_info on snapshot
sane-backends-1.0.25p2
xsane-0.999p2

$ pkg_info on 5.8 release
sane-backends-1.0.24p6
xsane-0.999p2


On Debian linux with sane-backends-1.0.24 and xsane-0.998 works fine.

Re: owncloud - external files directory

[Joseph Oficre]

I want to store all my files centralized. I have some windows pc's at home,
some notebooks and my work laptop. So i want to be able to put and take the
files from any of this PC's. But /var/ partition only 100gb size, so i
think it's good idea to move datadir to /home/ partition(or even to
external large disk, that i can just put in my pocket)

2016-04-17 14:12 GMT+03:00 Erling Westenvik :

> On Sun, Apr 17, 2016 at 12:40:59PM +0300, Joseph Oficre wrote:
> > Hello misc.
> > I've installed ownCloud with this guide
> >
> https://github.com/reyk/httpd/wiki/Running-ownCloud-with-httpd-on-OpenBSD
> >
> > Everything looks fine, but i want to store all my files not in
> > /var/www/owncloud/data but in /home/USER/owncloud/data/
> > Moving datadir to home and reconfiguring config/config.php
> "datadirectory"
> > did nothing, only error:
>
> httpd(8) is chroot(8)'ed to /var/www by default. Your options include:
>
> - disabling chroot, which isn't a very recommended option, or
> - set up /home as the new chroot, which probably isn't a very recommended
>   option either.
>
> What are you trying to achive?
>
> Regards,
>
> Erling
>
> >
> > PHP message:
> >
> {"reqId":"HMQmV6NKyZ0Af967TUia","remoteAddr":"192.168.0.102","app":"index","message":"Exception:
> > {\"Exception\":\"DoctrineDBALDBALException\",\"Message\":\"Failed
> > to connect to the database: An exception occured in driver:
> SQLSTATE[HY000]
> > [14] unable to open database file\",\"Code\":0,\"Trace\":\"#0
> >
> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(973):
> > OCDBConnection->connect()\\n#1
> > \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(203):
> > DoctrineDBALConnection->executeUpdate('PRAGMA read_unc...',
> Array,
> > Array)\\n#2
> >
> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(621):
> > OCDBConnection->executeUpdate('PRAGMA read_unc...')\\n#3
> > \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(135):
> > DoctrineDBALConnection->setTransactionIsolation(2)\\n#4
> >
> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/DriverManager.php(172):
> > OCDBConnection->__cons...
> > PHP message:
> >
> {"reqId":"HMQmV6NKyZ0Af967TUia","remoteAddr":"192.168.0.102","app":"core","message":"Exception:
> > {\"Exception\":\"DoctrineDBALDBALException\",\"Message\":\"Failed
> > to connect to the database: An exception occured in driver:
> SQLSTATE[HY000]
> > [14] unable to open database file\",\"Code\":0,\"Trace\":\"#0
> >
> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(973):
> > OCDBConnection->connect()\\n#1
> > \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(203):
> > DoctrineDBALConnection->executeUpdate('PRAGMA read_unc...',
> Array,
> > Array)\\n#2
> >
> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(621):
> > OCDBConnection->executeUpdate('PRAGMA read_unc...')\\n#3
> > \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(135):
> > DoctrineDBALConnection->setTransactionIsolation(2)\\n#4
> >
> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/DriverManager.php(172):
> > OCDBConnection->__const...
> > PHP message:
> >
> {"reqId":"HMQmV6NKyZ0Af967TUia","remoteAddr":"192.168.0.102","app":"core","message":"Exception:
> > {\"Exception\":\"DoctrineDBALDBALException\",\"Message\":\"Failed
> > to connect to the database: An exception occured in driver:
> SQLSTATE[HY000]
> > [14] unable to open database file\",\"Code\":0,\"Trace\":\"#0
> >
> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(973):
> > OCDBConnection->connect()\\n#1
> > \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(203):
> > DoctrineDBALConnection->executeUpdate('PRAGMA read_unc...',
> Array,
> > Array)\\n#2
> >
> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(621):
> > OCDBConnection->executeUpdate('PRAGMA read_unc...')\\n#3
> > \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(135):
> > DoctrineDBALConnection->setTransactionIsolation(2)\\n#4
> >
> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/DriverManager.php(172):
> > OCDBConnection->__const...
> >
> > PHP message:
> >
> {"reqId":"HMQmV6NKyZ0Af967TUia","remoteAddr":"192.168.0.102","app":"PHP","message":"touch():
> > Unable to create file \/home\/usf\/owncloud\/data\/owncloud.log because
> No
> > such file or directory at
> >
> \/owncloud\/lib\/private\/log\/owncloud.php#53","level":3,"time":"2016-04-16T22:26:45+00:00"}
> >
> >
> > Symlinking does the same.
> > Can someone tell me how can i move my datadir without moving all my
> > owncloud installation files to abother location?
> >
> >
> > OpenBSD-current, 

Re: owncloud - external files directory

[Erling Westenvik]

On Sun, Apr 17, 2016 at 12:40:59PM +0300, Joseph Oficre wrote:
> Hello misc.
> I've installed ownCloud with this guide
> https://github.com/reyk/httpd/wiki/Running-ownCloud-with-httpd-on-OpenBSD
> 
> Everything looks fine, but i want to store all my files not in
> /var/www/owncloud/data but in /home/USER/owncloud/data/
> Moving datadir to home and reconfiguring config/config.php "datadirectory"
> did nothing, only error:

httpd(8) is chroot(8)'ed to /var/www by default. Your options include:

- disabling chroot, which isn't a very recommended option, or
- set up /home as the new chroot, which probably isn't a very recommended
  option either.

What are you trying to achive?

Regards,

Erling

> 
> PHP message:
> {"reqId":"HMQmV6NKyZ0Af967TUia","remoteAddr":"192.168.0.102","app":"index","message":"Exception:
> {\"Exception\":\"DoctrineDBALDBALException\",\"Message\":\"Failed
> to connect to the database: An exception occured in driver: SQLSTATE[HY000]
> [14] unable to open database file\",\"Code\":0,\"Trace\":\"#0
> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(973):
> OCDBConnection->connect()\\n#1
> \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(203):
> DoctrineDBALConnection->executeUpdate('PRAGMA read_unc...', Array,
> Array)\\n#2
> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(621):
> OCDBConnection->executeUpdate('PRAGMA read_unc...')\\n#3
> \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(135):
> DoctrineDBALConnection->setTransactionIsolation(2)\\n#4
> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/DriverManager.php(172):
> OCDBConnection->__cons...
> PHP message:
> {"reqId":"HMQmV6NKyZ0Af967TUia","remoteAddr":"192.168.0.102","app":"core","message":"Exception:
> {\"Exception\":\"DoctrineDBALDBALException\",\"Message\":\"Failed
> to connect to the database: An exception occured in driver: SQLSTATE[HY000]
> [14] unable to open database file\",\"Code\":0,\"Trace\":\"#0
> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(973):
> OCDBConnection->connect()\\n#1
> \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(203):
> DoctrineDBALConnection->executeUpdate('PRAGMA read_unc...', Array,
> Array)\\n#2
> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(621):
> OCDBConnection->executeUpdate('PRAGMA read_unc...')\\n#3
> \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(135):
> DoctrineDBALConnection->setTransactionIsolation(2)\\n#4
> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/DriverManager.php(172):
> OCDBConnection->__const...
> PHP message:
> {"reqId":"HMQmV6NKyZ0Af967TUia","remoteAddr":"192.168.0.102","app":"core","message":"Exception:
> {\"Exception\":\"DoctrineDBALDBALException\",\"Message\":\"Failed
> to connect to the database: An exception occured in driver: SQLSTATE[HY000]
> [14] unable to open database file\",\"Code\":0,\"Trace\":\"#0
> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(973):
> OCDBConnection->connect()\\n#1
> \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(203):
> DoctrineDBALConnection->executeUpdate('PRAGMA read_unc...', Array,
> Array)\\n#2
> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(621):
> OCDBConnection->executeUpdate('PRAGMA read_unc...')\\n#3
> \\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(135):
> DoctrineDBALConnection->setTransactionIsolation(2)\\n#4
> \\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/DriverManager.php(172):
> OCDBConnection->__const...
> 
> PHP message:
> {"reqId":"HMQmV6NKyZ0Af967TUia","remoteAddr":"192.168.0.102","app":"PHP","message":"touch():
> Unable to create file \/home\/usf\/owncloud\/data\/owncloud.log because No
> such file or directory at
> \/owncloud\/lib\/private\/log\/owncloud.php#53","level":3,"time":"2016-04-16T22:26:45+00:00"}
> 
> 
> Symlinking does the same.
> Can someone tell me how can i move my datadir without moving all my
> owncloud installation files to abother location?
> 
> 
> OpenBSD-current, ownCloud 8.2, httpd, php-5.6, php-fpm

owncloud - external files directory

[Joseph Oficre]

Hello misc.
I've installed ownCloud with this guide
https://github.com/reyk/httpd/wiki/Running-ownCloud-with-httpd-on-OpenBSD

Everything looks fine, but i want to store all my files not in
/var/www/owncloud/data but in /home/USER/owncloud/data/
Moving datadir to home and reconfiguring config/config.php "datadirectory"
did nothing, only error:

PHP message:
{"reqId":"HMQmV6NKyZ0Af967TUia","remoteAddr":"192.168.0.102","app":"index","message":"Exception:
{\"Exception\":\"DoctrineDBALDBALException\",\"Message\":\"Failed
to connect to the database: An exception occured in driver: SQLSTATE[HY000]
[14] unable to open database file\",\"Code\":0,\"Trace\":\"#0
\\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(973):
OCDBConnection->connect()\\n#1
\\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(203):
DoctrineDBALConnection->executeUpdate('PRAGMA read_unc...', Array,
Array)\\n#2
\\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(621):
OCDBConnection->executeUpdate('PRAGMA read_unc...')\\n#3
\\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(135):
DoctrineDBALConnection->setTransactionIsolation(2)\\n#4
\\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/DriverManager.php(172):
OCDBConnection->__cons...
PHP message:
{"reqId":"HMQmV6NKyZ0Af967TUia","remoteAddr":"192.168.0.102","app":"core","message":"Exception:
{\"Exception\":\"DoctrineDBALDBALException\",\"Message\":\"Failed
to connect to the database: An exception occured in driver: SQLSTATE[HY000]
[14] unable to open database file\",\"Code\":0,\"Trace\":\"#0
\\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(973):
OCDBConnection->connect()\\n#1
\\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(203):
DoctrineDBALConnection->executeUpdate('PRAGMA read_unc...', Array,
Array)\\n#2
\\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(621):
OCDBConnection->executeUpdate('PRAGMA read_unc...')\\n#3
\\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(135):
DoctrineDBALConnection->setTransactionIsolation(2)\\n#4
\\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/DriverManager.php(172):
OCDBConnection->__const...
PHP message:
{"reqId":"HMQmV6NKyZ0Af967TUia","remoteAddr":"192.168.0.102","app":"core","message":"Exception:
{\"Exception\":\"DoctrineDBALDBALException\",\"Message\":\"Failed
to connect to the database: An exception occured in driver: SQLSTATE[HY000]
[14] unable to open database file\",\"Code\":0,\"Trace\":\"#0
\\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(973):
OCDBConnection->connect()\\n#1
\\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(203):
DoctrineDBALConnection->executeUpdate('PRAGMA read_unc...', Array,
Array)\\n#2
\\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/Connection.php(621):
OCDBConnection->executeUpdate('PRAGMA read_unc...')\\n#3
\\\/owncloud\\\/lib\\\/private\\\/db\\\/connection.php(135):
DoctrineDBALConnection->setTransactionIsolation(2)\\n#4
\\\/owncloud\\\/3rdparty\\\/doctrine\\\/dbal\\\/lib\\\/Doctrine\\\/DBAL\\\/DriverManager.php(172):
OCDBConnection->__const...

PHP message:
{"reqId":"HMQmV6NKyZ0Af967TUia","remoteAddr":"192.168.0.102","app":"PHP","message":"touch():
Unable to create file \/home\/usf\/owncloud\/data\/owncloud.log because No
such file or directory at
\/owncloud\/lib\/private\/log\/owncloud.php#53","level":3,"time":"2016-04-16T22:26:45+00:00"}


Symlinking does the same.
Can someone tell me how can i move my datadir without moving all my
owncloud installation files to abother location?


OpenBSD-current, ownCloud 8.2, httpd, php-5.6, php-fpm

Re: Odd (incorrect?) zsh output

[Kamil Cholewiński]

On Sun, 17 Apr 2016, Geoff Wozniak  wrote:
>   # zsh -c 'x=$(false); echo $?'
>   0

Same thing here, same arch/release, different hardware:

> $ uname -mr 
> 5.9 amd64
> $ sysctl hw.vendor hw.product 
> hw.vendor=Dell Inc.
> hw.product=PowerEdge T20
> $ zsh -c 'x=$(false); echo $?' 
> 0
> $ pkg_info -I zsh
> zsh-5.2p2   Z shell, Bourne shell-compatible

No rc files in sight:

> $ ls .zsh*   
> ls: .zsh*: No such file or directory

Seems like a fault with zsh, not false:

> $ zsh -c 'x=$(ls xxx); echo $?'
> ls: xxx: No such file or directory
> 0

Built latest release from http://www.zsh.org/:

> $ ./Src/zsh --version
> zsh 5.2 (x86_64-unknown-openbsd5.9)
> $ ./Src/zsh -c 'x=$(false); echo $?' 
> 0

Looks like zsh bug.

K.

Re: openbsd vs freebsd NAT performance

[Philip Guenther]

On Sat, Apr 16, 2016 at 5:10 AM, bluesun08  wrote:
> beside OpenBSD 5.8 i installed FreeBSD 10.3 on my router-pc. For routing i 
> use pf.
> I noticed that the routing/NAT-performance is in FreeBSD noticeable higher
> than in OpenBSD. I think that is due to the SMP-support of pf in FreeBSD.
>
> Is there also a SMP support (intended) in OpenBSD?

Several developers are actively working on the various parts of making
the entire network stack capable of taking advantage of multiple CPUs.
OpenBSD 5.9 has several improvements in this area (c.f.
http://www.openbsd.org/59.html), but AFAIR packet processing in PF is
still single-threaded.


Philip Guenther