Re: X won't work
May this is not the case but it might be possible to have many instances of the server ending with the same error. Try killing all instances, and then try again. If there are many instances, trying to start another one merely fails because there already exists /tmp/.X0-lock From the bottom of the error message it seems it is a lock problem. And then again may be this is not the case. --- On Wed, 5/6/09, x x tonino-pa...@lycos.com wrote: From: x x tonino-pa...@lycos.com Subject: X won't work To: misc@openbsd.org Date: Wednesday, May 6, 2009, 1:06 AM it's an old Intel video on Inspiron from 2003. I already uncommented machdep.allowaperture=2, and when I type startx I get xauth: creating new authority file /root/.serverauth.24871 X.Org X Server 1.5.3 Release Date: 5 November 2008 X Protocol Version 11, Revision 0 Build Operating System: OpenBSD 4.5 i386 Current Operating System: OpenBSD lengsel.vc.shawcable.net 4.5 GENERIC#0 i386 Build Date: 05 May 2009 03:10:16PM Before reporting problems, check http://wiki.x.org to make sure that you have the latest version. Markers: (--) probed, (**) from config file, (==) default setting, (++) from command line, (!!) notice, (II) informational, (WW) warning, (EE) error, (NI) not implemented, (??) unknown. (==) Log file: /var/log/Xorg.0.log, Time: Tue May 5 18:00:43 2009 (EE) Unable to locate/open config file New driver is intel (==) Using default built-in configuration (30 lines) (EE) Failed to load module fbdev (module does not exist, 0) Error in I830WaitLpRing(), timeout for 2 seconds pgetbl_ctl: 0x1ffe0001 getbl_err: 0x0021 ipeir: 0x iphdr: 0x54f6 LP ring tail: 0x9fe0 head: 0xa000 len: 0x0001f001 start 0x eir: 0x esr: 0x0010 emr: 0xff7b instdone: 0xff41 instpm: 0x memmode: 0x instps: 0x0820 hwstam: 0xeffe ier: 0x0042 imr: 0xffbf iir: 0x Ring at virtual 0x8bd7d000 head 0xa000 tail 0x9fe0 count 32760 Ring at virtual 0x8bd7d000 head 0xa000 tail 0x9fe0 count 32760 9f00: MI_NOOP 1 9f04: MI_NOOP 1 9f08: MI_NOOP 1 9f0c: MI_NOOP 1 9f10: MI_NOOP 1 9f14: MI_NOOP 1 9f18: MI_NOOP 1 9f1c: MI_NOOP 1 9f20: MI_NOOP 1 9f24: MI_NOOP 1 9f28: MI_NOOP 1 9f2c: MI_NOOP 1 9f30: MI_NOOP 1 9f34: MI_NOOP 1 9f38: MI_NOOP 1 9f3c: MI_NOOP 1 9f40: MI_NOOP 1 9f44: MI_NOOP 1 9f48: MI_NOOP 1 9f4c: MI_NOOP 1 9f50: MI_NOOP 1 9f54: MI_NOOP 1 9f58: MI_NOOP 1 9f5c: MI_NOOP 1 9f60: MI_NOOP 1 9f64: MI_NOOP 1 9f68: MI_NOOP 1 9f6c: MI_NOOP 1 9f70: MI_NOOP 1 9f74: MI_NOOP 1 9f78: MI_NOOP 1 9f7c: MI_NOOP 1 9f80: MI_NOOP 1 9f84: MI_NOOP 1 9f88: MI_NOOP 1 9f8c: MI_NOOP 1 9f90: MI_NOOP 1 9f94: MI_NOOP 1 9f98: MI_NOOP 1 9f9c: MI_NOOP 1 9fa0: MI_NOOP 1 9fa4: MI_NOOP 1 9fa8: MI_NOOP 1 9fac: MI_NOOP 1 9fb0: MI_NOOP 1 9fb4: MI_NOOP 1 9fb8: MI_NOOP 1 9fbc: MI_NOOP 1 9fc0: MI_NOOP 1 9fc4: MI_NOOP 1 9fc8: MI_NOOP 1 9fcc: MI_NOOP 1 9fd0: MI_NOOP 1 9fd4: MI_NOOP 1 9fd8: MI_NOOP 1 9fdc: MI_NOOP 1 9fe0: MI_NOOP 1 9fe4: MI_NOOP 1 9fe8: MI_NOOP 1 9fec: MI_NOOP 1 9ff0: MI_NOOP 1 9ff4: MI_NOOP 1 9ff8: MI_NOOP 1 9ffc: MI_NOOP 1 Ring end space: 24 wanted 32 Fatal server error: lockup giving up. xinit: Connection refused (errno 61): unable to connect to X server xinit: No such process (errno 3): Server error.
Re: Fujitsu-siemens machine freezes
Hello, I have followed your suggestions regarding -current. amd64 -current (GENERIC.MP) does no longer hangs when trying to detach re0, but now, re0 is sometimes detected correctly and sometimes not: I give the messages in both cases: Failure: re0 an pci2 dev0 function 0 Realtek 8168 rev 0x02: RTL8168C/8111C (0x3c00), apic2 int 16 (irq 11), address 00:19:99:54:31:7f re0: PHY write failed re0: PHY write failed re0: no PHY found! re0: reset never completed! re0 detached Success: re0 an pci2 dev0 function 0 Realtek 8168 rev 0x02: RTL8168C/8111C (0x3c00), apic2 int 16 (irq 11), address 00:19:99:54:31:7f rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2 the controller is: 10/100/1000 MBit/s Realtek RTL8111C, so i think the kernel sometimes initializes the controller with a driver and sometimes with a 'close enough driver', and in the later case it works. i will also try tonight a freshly backed i386 release, which initially failed to build due to a link error(but the kernel and userland completed flawlessly), however a second attempt with a new update from cvs completed successfully. i'll let you now the results. thank you for your support, bogdan p.s. please let me know if somebody needs the port 8283 opened anymore.
Re: Fujitsu-siemens machine freezes
Hello everybody, yes Sam, you are right, but this bios is a little bit different, there is only a setting regarding SATA: SATA0 legacy. with this option enabled, the kernel detects the hard drive, but is not able to initialize it in order to be partitioned . So i disabled this option and it is working properly (this happens for both kernels and i think that legacy code is no longer supported by the kernels, which is not an issue). I tried an official image i386 installation image on different media and has the same problem. I tried the amd64 kernel and it works flawlessly, and detects more cpu flags than i386 kernel(including NX flag); thanks Stuart for this suggestion. The system is up and running, showing both cores on top command. Very nice. I put both dmesg on these addresses: http://swordfish.rotld.ro:8283/dmesgs/amd64_44_dmesg http://swordfish.rotld.ro:8283/dmesgs/i386_44_dmesg There are two issues regarding both kernels: 1. command 'halt' does halts the system but the keyboard, which is on usb, does not responds anymore, so the system cannot be restarted. but this is not a problem, as 'reboot', 'shutdown -r now' reboots the system properly, and 'halt -p' halts the system and shuts down the power, which is what i want; 2. the lan controller on board i think is faulty causing both kernels to panic. this si not a problem because i disabled it from bios, as i want to buy a real network card. the diagnose message is (i wrote it down on a piece of paper): panic: config_detach: force detach of re0 failed (45). i am not able to do any 'trace' an 'ps' commands, here, in this situation, because the keyboard freezes. please let me know if the above dmesg messages are accessible through that address and port configuration as it might be filtered. this is my machine at work and it is not supposed to be visible from outside, but hey we a trying to solve an issue here, so if we can make it visible, why not do so? just let me know if you can access it. Thank you very much for your support and suggestions bogdan
Re: Fujitsu-siemens machine freezes
hello, i'll try to extract the dmesg out that machine. tonight i want to try also the amd64 install image, and i want to make dmesg dump for both i386 and amd64. thank you for answering, bogdan --- On Mon, 1/26/09, Jasper Lievisse Adriaanse jas...@humppa.nl wrote: From: Jasper Lievisse Adriaanse jas...@humppa.nl Subject: Re: Fujitsu-siemens machine freezes To: BOG BOG bo...@yahoo.com Date: Monday, January 26, 2009, 4:38 AM On Sun, Jan 25, 2009 at 11:51:19PM -0800, BOG BOG wrote: Hello, In this weekend i bought a fujitsu-siemens machine, with the following configuration: Pentium Core duo Intel E2200, 2.20 Ghz FSB 800 Mhz 3 Gb ram: 2 GB (1 module(s) with 2 GB, DDR2), 800 MHz 1 GB (1 module(s) with 1 GB, DDR2), 800 MHz Hdd 500 Gb, Serial ATA II The following is copy/paste from the data sheet(found here: http://sp.fujitsu-siemens.com/dmsp/docs/ds-esprimo-p3510.pdf) Mainboard typeD2750 Formfactor5BTX Chipset Intel. G31 Processor socket LGA 775 Processor quantity maximum1 System bus (FSB / HT / QPI) up to 1333 MHz Memory slots 2 DIMM (DDR2) Supported capacity RAM (max.) 8 GB Memory frequency 800 MHz Memory notes With future modules. Dual channel support. For dual channel performance, 2 memory modules have to be ordered. Capacity per channel has to be the same. LAN 10/100/1000 MBit/s Realtek RTL8111C BIOS version Phoenix 6.0 BIOS features BIOS Flash EPROM update by software Recovery BIOS Audio codec Realtek ALC262 Audio featuresHigh Definition audio The problem is that after the process of creating the partitions, and copying the base modules, the machine freezes. I do not install xserver modules, as I want it to be a server, an right after the game44.tgz module is copied on the hard drive, the system freezes. I tried to exclude game44.tgz, in a new installation process, and after man44.tgz, the system freezes. I really do not understand the problem, because the hard drive as well as cd drive are detected and properly initialized. Unfortunately, I do not have the dmesg I do not want to put other os on this machine, because i like OpenBSD. I really apreciate any help in this direction, Thank you very much, bogdan hi, a dmesg is absolutely needed to diagnose your problem (or rather the computer's ;-) ) could you perhaps make pictures of the dmesg? cheers, jasper -- Intelligence should guide our actions, but in harmony with the texture of the situation at hand -- Francisco Varela
Re: Fujitsu-siemens machine freezes
Thank you for your answer. I'll try to follow the suggestions you have made. Sorry for not using the correct mailing list. --- On Mon, 1/26/09, Stuart Henderson s...@spacehopper.org wrote: From: Stuart Henderson s...@spacehopper.org Subject: Re: Fujitsu-siemens machine freezes To: BOG BOG bo...@yahoo.com Cc: misc@openbsd.org, t...@openbsd.org Date: Monday, January 26, 2009, 4:03 AM [ Moving to misc@openbsd.org, tech@ is for 'Discussion of technical topics for OpenBSD developers and advanced users. This is not a tech support forum, do not use it as such.' www.openbsd.org/mail.html ] On 2009/01/25 23:51, BOG BOG wrote: Hello, In this weekend i bought a fujitsu-siemens machine, with the following configuration: From your description you could be trying any of these: i386 4.4, amd64 4.4, i386 -current, amd64 -current. Try a different one. If it still fails with -current you will need to get dmesg out of the machine somehow, see FAQ 4.15 (you can use a USB stick instead a floppy disk, it will probably show up as /dev/sd0i).
Re: Fujitsu-siemens machine freezes
I tried to install OpenBSD4.4 i386. The instalation image was created by me, and it worked fine for an update from 4.3 to 4.4. version, but on different machine, the one i worked on. I'll try to get a stick and save the dmesg for fujitsu machine. Thank you for your suggestions --- On Mon, 1/26/09, Kenneth R Westerback kwesterb...@rogers.com wrote: From: Kenneth R Westerback kwesterb...@rogers.com Subject: Re: Fujitsu-siemens machine freezes To: BOG BOG bo...@yahoo.com Date: Monday, January 26, 2009, 4:12 AM On Sun, Jan 25, 2009 at 11:51:19PM -0800, BOG BOG wrote: Hello, In this weekend i bought a fujitsu-siemens machine, with the following configuration: Pentium Core duo Intel E2200, 2.20 Ghz FSB 800 Mhz 3 Gb ram: 2 GB (1 module(s) with 2 GB, DDR2), 800 MHz 1 GB (1 module(s) with 1 GB, DDR2), 800 MHz Hdd 500 Gb, Serial ATA II The following is copy/paste from the data sheet(found here: http://sp.fujitsu-siemens.com/dmsp/docs/ds-esprimo-p3510.pdf) Mainboard typeD2750 Formfactor5BTX Chipset Intel. G31 Processor socket LGA 775 Processor quantity maximum1 System bus (FSB / HT / QPI) up to 1333 MHz Memory slots 2 DIMM (DDR2) Supported capacity RAM (max.) 8 GB Memory frequency 800 MHz Memory notes With future modules. Dual channel support. For dual channel performance, 2 memory modules have to be ordered. Capacity per channel has to be the same. LAN 10/100/1000 MBit/s Realtek RTL8111C BIOS version Phoenix 6.0 BIOS features BIOS Flash EPROM update by software Recovery BIOS Audio codec Realtek ALC262 Audio featuresHigh Definition audio The problem is that after the process of creating the partitions, and copying the base modules, the machine freezes. I do not install xserver modules, as I want it to be a server, an right after the game44.tgz module is copied on the hard drive, the system freezes. I tried to exclude game44.tgz, in a new installation process, and after man44.tgz, the system freezes. I really do not understand the problem, because the hard drive as well as cd drive are detected and properly initialized. Unfortunately, I do not have the dmesg I do not want to put other os on this machine, because i like OpenBSD. I really apreciate any help in this direction, Thank you very much, bogdan What version of OpenBSD are you trying to install? If it isn't a -current snapshot then please try a -current snapshot. Are you trying to install i386 OpenBSD or amd64 OpenBSD? In either case try the other one. :-). A dmesg would really help. Ken
