Re: Problem with raid 1 in server dell
I apologize for saying it is not compatible but i don't know exactly what is the problem. I had another dell server running without problem, when it was replaced by the new server with a raid controller, gives these problems of inconsistency disk and freeze. Something that no comment was that the server has a Dual Core Intel Xeon processor, I read that these processors have many mistakes but that some people have used without problem with openbsd, Does this could be the cause of freezing and the inconsistency in the disk? Thank you, Christian - Original Message - From: Nick Holland [EMAIL PROTECTED] To: misc misc@openbsd.org Sent: Wednesday, October 24, 2007 6:58 PM Subject: Re: Problem with raid 1 in server dell Josi Christian Rodrmguez wrote: Hi list, My system was freeze and when reboot show: /dev/rsd0a: file system is clean;not checking /dev/rsd0d: file system is clean;not checking /dev/rsd0e: file system is clean;not checking /dev/rsd0g: INCORRECT BLOCK COUNT I=2699655 (20 should be 16) (CORRECTED) PARTIALLY TRUNCATED INODE I=19268881 /dev/rsd0g:UNEXPECTED INCONSISTENCY; RUN fsck_ffs MANUALLY. THE FOLLOWING FILE SYSTEN HAD AN UNEXPECTED INCOSISTENCY: ffs: /dev/rsd0g(/var) Automatic File system check failed: help! Enter pathname of shell or RETURN for sh: I think this problem is for incompatibility with raid controler SAS5IR, but in the openbsd page say this hardware is support. I have two harddisk SATA Raid 1 You haven't convinced me of an actual problem here. Your file system on sd0a is messed up (it happens when you have lockups like you say you did) but why do you say it is not compatible? Nick. dmesg OpenBSD 4.1-stable (GENERIC.MP) #0: Wed Oct 10 10:43:00 MDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Xeon(R) CPU 3050 @ 2.13GHz (GenuineIntel 686-class) 2.14 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16, xTPR real mem = 2146795520 (2096480K) avail mem = 1952034816 (1906284K) using 4278 buffers containing 107462656 bytes (104944K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+ BIOS, date 04/04/07, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.4 @ 0xfa5b0 (48 entries) bios0: Dell Computer Corporation PowerEdge 860 pcibios0 at bios0: rev 2.1 @ 0xf/0x1 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfba60/176 (9 entries) pcibios0: PCI Interrupt Router at 000:31:0 (Intel 82801GB LPC rev 0x00) pcibios0: PCI bus #7 is the last bus bios0: ROM list: 0xc/0x9000 0xc9000/0x1000 0xca000/0x5c00 0xd/0x1800 0xec000/0x4000! acpi at mainbus0 not configured ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4 mainbus0: Intel MP Specification (Version 1.4) cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 266 MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Xeon(R) CPU 3050 @ 2.13GHz (GenuineIntel 686-class) 2.14 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16, xTPR mainbus0: bus 0 is type PCI mainbus0: bus 1 is type PCI mainbus0: bus 2 is type PCI mainbus0: bus 3 is type PCI mainbus0: bus 4 is type PCI mainbus0: bus 5 is type PCI mainbus0: bus 6 is type PCI mainbus0: bus 7 is type PCI mainbus0: bus 8 is type ISA ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 Intel E7230 MCH rev 0x00 ppb0 at pci0 dev 1 function 0 Intel E7230 PCIE rev 0x00 pci1 at ppb0 bus 1 ppb1 at pci1 dev 0 function 0 Intel PCIE-PCIE rev 0x09 pci2 at ppb1 bus 2 mpi0 at pci2 dev 8 function 0 Symbios Logic SAS1068 rev 0x01: apic 2 int 16 (irq 5) scsibus0 at mpi0: 112 targets sd0 at scsibus0 targ 0 lun 0: Dell, VIRTUAL DISK, 1028 SCSI3 0/direct fixed sd0: 237464MB, 237464 cyl, 16 head, 128 sec, 512 bytes/sec, 486326272 sec total Intel IOxAPIC rev 0x09 at pci1 dev 0 function 1 not configured ppb2 at pci0 dev 28 function 0 Intel 82801GB PCIE rev 0x01 pci3 at ppb2 bus 3 ppb3 at pci3 dev 0 function 0 ServerWorks PCIE-PCIX rev 0xc3 pci4 at ppb3 bus 4 bnx0 at pci4 dev 0 function 0 Broadcom BCM5708 rev 0x12: apic 2 int 16 (irq 5) ppb4 at pci0 dev 28 function 4 Intel 82801G PCIE rev 0x01 pci5 at ppb4 bus 5 bge0 at pci5 dev 0 function 0 Broadcom BCM5721 rev 0x11, BCM5750 B1 (0x4101): apic 2 int 16 (irq 5), address 00:19:b9:f7:a7:0a brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb5 at pci0 dev 28 function 5 Intel 82801G PCIE rev 0x01 pci6 at ppb5 bus 6 bge1 at pci6 dev 0 function 0 Broadcom BCM5721 rev 0x11, BCM5750 B1 (0x4101): apic 2 int 17 (irq 3), address 00:19:b9:f7:a7:0b brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 uhci0 at pci0 dev 29 function 0 Intel 82801GB USB rev 0x01: apic
Problem with raid 1 in server dell
Hi list, My system was freeze and when reboot show: /dev/rsd0a: file system is clean;not checking /dev/rsd0d: file system is clean;not checking /dev/rsd0e: file system is clean;not checking /dev/rsd0g: INCORRECT BLOCK COUNT I=2699655 (20 should be 16) (CORRECTED) PARTIALLY TRUNCATED INODE I=19268881 /dev/rsd0g:UNEXPECTED INCONSISTENCY; RUN fsck_ffs MANUALLY. THE FOLLOWING FILE SYSTEN HAD AN UNEXPECTED INCOSISTENCY: ffs: /dev/rsd0g(/var) Automatic File system check failed: help! Enter pathname of shell or RETURN for sh: I think this problem is for incompatibility with raid controler SAS5IR, but in the openbsd page say this hardware is support. I have two harddisk SATA Raid 1 dmesg OpenBSD 4.1-stable (GENERIC.MP) #0: Wed Oct 10 10:43:00 MDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC.MP cpu0: Intel(R) Xeon(R) CPU 3050 @ 2.13GHz (GenuineIntel 686-class) 2.14 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16, xTPR real mem = 2146795520 (2096480K) avail mem = 1952034816 (1906284K) using 4278 buffers containing 107462656 bytes (104944K) of memory mainbus0 (root) bios0 at mainbus0: AT/286+ BIOS, date 04/04/07, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev. 2.4 @ 0xfa5b0 (48 entries) bios0: Dell Computer Corporation PowerEdge 860 pcibios0 at bios0: rev 2.1 @ 0xf/0x1 pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfba60/176 (9 entries) pcibios0: PCI Interrupt Router at 000:31:0 (Intel 82801GB LPC rev 0x00) pcibios0: PCI bus #7 is the last bus bios0: ROM list: 0xc/0x9000 0xc9000/0x1000 0xca000/0x5c00 0xd/0x1800 0xec000/0x4000! acpi at mainbus0 not configured ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca8/8 spacing 4 mainbus0: Intel MP Specification (Version 1.4) cpu0 at mainbus0: apid 0 (boot processor) cpu0: apic clock running at 266 MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Xeon(R) CPU 3050 @ 2.13GHz (GenuineIntel 686-class) 2.14 GHz cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16, xTPR mainbus0: bus 0 is type PCI mainbus0: bus 1 is type PCI mainbus0: bus 2 is type PCI mainbus0: bus 3 is type PCI mainbus0: bus 4 is type PCI mainbus0: bus 5 is type PCI mainbus0: bus 6 is type PCI mainbus0: bus 7 is type PCI mainbus0: bus 8 is type ISA ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 2 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 Intel E7230 MCH rev 0x00 ppb0 at pci0 dev 1 function 0 Intel E7230 PCIE rev 0x00 pci1 at ppb0 bus 1 ppb1 at pci1 dev 0 function 0 Intel PCIE-PCIE rev 0x09 pci2 at ppb1 bus 2 mpi0 at pci2 dev 8 function 0 Symbios Logic SAS1068 rev 0x01: apic 2 int 16 (irq 5) scsibus0 at mpi0: 112 targets sd0 at scsibus0 targ 0 lun 0: Dell, VIRTUAL DISK, 1028 SCSI3 0/direct fixed sd0: 237464MB, 237464 cyl, 16 head, 128 sec, 512 bytes/sec, 486326272 sec total Intel IOxAPIC rev 0x09 at pci1 dev 0 function 1 not configured ppb2 at pci0 dev 28 function 0 Intel 82801GB PCIE rev 0x01 pci3 at ppb2 bus 3 ppb3 at pci3 dev 0 function 0 ServerWorks PCIE-PCIX rev 0xc3 pci4 at ppb3 bus 4 bnx0 at pci4 dev 0 function 0 Broadcom BCM5708 rev 0x12: apic 2 int 16 (irq 5) ppb4 at pci0 dev 28 function 4 Intel 82801G PCIE rev 0x01 pci5 at ppb4 bus 5 bge0 at pci5 dev 0 function 0 Broadcom BCM5721 rev 0x11, BCM5750 B1 (0x4101): apic 2 int 16 (irq 5), address 00:19:b9:f7:a7:0a brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 ppb5 at pci0 dev 28 function 5 Intel 82801G PCIE rev 0x01 pci6 at ppb5 bus 6 bge1 at pci6 dev 0 function 0 Broadcom BCM5721 rev 0x11, BCM5750 B1 (0x4101): apic 2 int 17 (irq 3), address 00:19:b9:f7:a7:0b brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0 uhci0 at pci0 dev 29 function 0 Intel 82801GB USB rev 0x01: apic 2 int 20 (irq 11) usb0 at uhci0: USB revision 1.0 uhub0 at usb0 uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1 at pci0 dev 29 function 1 Intel 82801GB USB rev 0x01: apic 2 int 21 (irq 10) usb1 at uhci1: USB revision 1.0 uhub1 at usb1 uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered uhci2 at pci0 dev 29 function 2 Intel 82801GB USB rev 0x01: apic 2 int 22 (irq 6) usb2 at uhci2: USB revision 1.0 uhub2 at usb2 uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1 uhub2: 2 ports with 2 removable, self powered ehci0 at pci0 dev 29 function 7 Intel 82801GB USB rev 0x01: apic 2 int 20 (irq 11) usb3 at ehci0: USB revision 2.0 uhub3 at usb3 uhub3: Intel EHCI root hub, rev 2.00/1.00, addr 1 uhub3: 6 ports with 6 removable, self powered ppb6 at pci0 dev 30 function 0 Intel 82801BA AGP rev 0xe1 pci7 at ppb6 bus 7 vga1 at pci7 dev 5 function 0 ATI ES1000 rev 0x02 wsdisplay0 at vga1 mux 1:
