how routing multicast traffic?
Hello, I try to route some multicast traffic between two networks, but it does not work. em0: inet 10.100.1.1 netmask 0x broadcast 10.100.255.255 em1: inet 192.168.251.251 netmask 0xff00 broadcast 192.168.251.255 Multicast address: 239.192.1.1 Port 12345 Sender in em1, client in em0 network. changes in /etc/rc.conf: mrouted_flags=NO multicast_router=YES changes in /etc/sysctl.conf: net.inet.ip.mforwarding=1 full /etc/igmpproxy.conf: phyint em1 upstream ratelimit 0 threshold 1 altnet 239.0.0.0/8 phyint em0 downstream ratelimit 0 threshold 1 phyint lo0 disabled igmpproxy log: Current routing table (Insert Route); - Debu: #5: Dst: 239.192.1.1, Age:2, St: I, OutVifs: 0x0001 tcpdump -npi em1 multicast tcpdump: listening on em1, link-type EN10MB 12:31:50.348887 192.168.251.1.51946 239.192.1.1.12345: udp 30 (DF) [ttl 1] 12:31:51.349844 192.168.251.1.51946 239.192.1.1.12345: udp 30 (DF) [ttl 1] 12:31:52.350939 192.168.251.1.51946 239.192.1.1.12345: udp 30 (DF) [ttl 1] 12:31:53.351810 192.168.251.1.51946 239.192.1.1.12345: udp 30 (DF) [ttl 1] 12:31:54.352781 192.168.251.1.51946 239.192.1.1.12345: udp 30 (DF) [ttl 1] tcpdump on em0: - no packets What I'm doing wrong? Thx in advance for any help. Regards, Thomas
snmpd reports the wrong IfIndex/IP association
Hi, I try to query the interfaces on my OpenBSD firewall. But I get a wrong IfIndex/IP association: IF-MIB::ifDescr.1 = STRING: lo0 IF-MIB::ifDescr.2 = STRING: em0 IF-MIB::ifDescr.3 = STRING: em1 IF-MIB::ifDescr.4 = STRING: em2 IF-MIB::ifDescr.5 = STRING: em3 IF-MIB::ifDescr.6 = STRING: enc0 IF-MIB::ifDescr.7 = STRING: pfsync0 IF-MIB::ifDescr.8 = STRING: pflog0 IF-MIB::ifDescr.9 = STRING: carp0 IF-MIB::ifDescr.10 = STRING: carp1 IF-MIB::ifDescr.11 = STRING: carp2 IP-MIB::ipAdEntIfIndex.10.100.102.235 = INTEGER: 1 IP-MIB::ipAdEntIfIndex.172.16.0.235 = INTEGER: 2 IP-MIB::ipAdEntIfIndex.172.16.1.235 = INTEGER: 3 IP-MIB::ipAdEntIfIndex.192.168.56.1 = INTEGER: 4 IP-MIB::ipAdEntIfIndex.127.0.0.1 = INTEGER: 6 IP-MIB::ipAdEntIfIndex.10.100.102.239 = INTEGER: 7 IP-MIB::ipAdEntIfIndex.172.16.0.239 = INTEGER: 8 IP-MIB::ipAdEntIfIndex.172.16.1.239 = INTEGER: 9 [demime 1.01d removed an attachment of type application/x-pkcs7-signature which had a name of smime.p7s]
Re: snmpd reports the wrong IfIndex/IP association
sorry, I push the send button accidently. NET-SNMP version: 5.4.2.1 Web: http://www.net-snmp.org/ Email: net-snmp-cod...@lists.sourceforge.net I didnt make changes during snmpd is running, I also reboot the server. maybe someone have a idea? regard, Tom Hi, I try to query the interfaces on my OpenBSD firewall. But I get a wrong IfIndex/IP association: IF-MIB::ifDescr.1 = STRING: lo0 IF-MIB::ifDescr.2 = STRING: em0 IF-MIB::ifDescr.3 = STRING: em1 IF-MIB::ifDescr.4 = STRING: em2 IF-MIB::ifDescr.5 = STRING: em3 IF-MIB::ifDescr.6 = STRING: enc0 IF-MIB::ifDescr.7 = STRING: pfsync0 IF-MIB::ifDescr.8 = STRING: pflog0 IF-MIB::ifDescr.9 = STRING: carp0 IF-MIB::ifDescr.10 = STRING: carp1 IF-MIB::ifDescr.11 = STRING: carp2 IP-MIB::ipAdEntIfIndex.10.100.102.235 = INTEGER: 1 IP-MIB::ipAdEntIfIndex.172.16.0.235 = INTEGER: 2 IP-MIB::ipAdEntIfIndex.172.16.1.235 = INTEGER: 3 IP-MIB::ipAdEntIfIndex.192.168.56.1 = INTEGER: 4 IP-MIB::ipAdEntIfIndex.127.0.0.1 = INTEGER: 6 IP-MIB::ipAdEntIfIndex.10.100.102.239 = INTEGER: 7 IP-MIB::ipAdEntIfIndex.172.16.0.239 = INTEGER: 8 IP-MIB::ipAdEntIfIndex.172.16.1.239 = INTEGER: 9
Problem with PF - connection is first passed, but later blocked
Hi,
I try to reach a sftp server behind my openbsd 4.6 firewall. Sometimes
it works and sometimes not.
SRC IP: 10.100.106.58
DST IP: xxx.xxx.126.244
DST Port: 7400/tcp
If I try to connect pflog shows me:
Mar 16 20:36:39.570280 rule 201/(match) pass in on em0:
10.100.106.58.35286 xxx.xxx.126.244.7400: S 3090744159:3090744159(0)
win 5840 mss 1460,sackOK,timestamp 4134057806[|tcp] (DF)
Mar 16 20:36:39.570292 rule 201/(match) pass out on em4:
10.100.106.58.35286 xxx.xxx.126.244.7400: S 3090744159:3090744159(0)
win 5840 mss 1460,sackOK,timestamp 4134057806[|tcp] (DF)
Mar 16 20:37:14.677912 rule 244/(match) block in on em0:
10.100.106.58.35286 xxx.xxx.126.244.7400: P 3090746972:3090747004(32)
ack 3225125621 win 224 nop,nop,timestamp 4134092914 1713395 (DF) [tos
0x8]
Mar 16 20:37:14.916504 rule 244/(match) block in on em0:
10.100.106.58.35286 xxx.xxx.126.244.7400: P 0:32(32) ack 1 win 224
nop,nop,timestamp 4134093152 1713395 (DF) [tos 0x8]
Mar 16 20:37:15.392461 rule 244/(match) block in on em0:
10.100.106.58.35286 xxx.xxx.126.244.7400: P 0:32(32) ack 1 win 224
nop,nop,timestamp 4134093628 1713395 (DF) [tos 0x8]
the first connection passed, but them it is blocked - why?
affected rules:
@201 pass log quick inet proto tcp from tbl.r76.s:3 to tbl.r41.d:4
port = 7400 flags S/SA keep state label RULE 76 -- ACCEPT
[ Evaluations: 13948 Packets: 390 Bytes: 300416 States:
0 ]
[ Inserted: uid 0 pid 4296 State Creations: 12]
@244 block return-icmp(port-unr) log quick inet all label deny_rest
[ Evaluations: 28108654 Packets: 28108654 Bytes: 15763202122
States: 0 ]
[ Inserted: uid 0 pid 4296 State Creations: 0 ]
table tbl.r41.d { xxx.xxx.126.246 , xxx.xxx.126.244 , xxx.xxx.105.194
, xxx.xxx.126.245 }
table tbl.r76.s { 10.100.102.30 , 10.100.106.58 , 10.100.107.58 }
thx, for any hint.
regards,
Thomas
Snapshot 4.7: LSI SAS 1078 controller on Intel S5520UR - No disks found!
Hi, I try to install the current snapshot on a Intel S5520UR board with LSI SAS 1078 controller. Install failed, because no disks found. If I not wrong, normaly the controller is supported since 4.3. by the mfi driver. The board has the latest available firmware installed. Does anyone have some hints for me, or are additional infos necessary? regard, Thomas
Re: Snapshot 4.7: LSI SAS 1078 controller on Intel S5520UR - No disks found!
) for native-PCI interrupt ichiic0 at pci0 dev 31 function 3 Intel 82801JI SMBus rev 0x00: apic 8 int 18 (irq 5) iic0 at ichiic0 iic0: addr 0x18 00=00 01=00 02=00 03=00 04=04 05=41 06=00 07=20 08=01 09=60 0a=a2 0b=27 0c=00 words 00=000f 01=000c 02= 03= 04=04a4 05=41f4 06=0054 07=2001 iic0: addr 0x1a 00=00 01=00 02=00 03=00 04=04 05=41 06=00 07=20 08=01 09=60 0a=a2 0b=26 0c=00 words 00=000f 01=000c 02= 03= 04=04a4 05=41f4 06=0054 07=2001 iic0: addr 0x2e 00=40 words 00=4040 01= 02= 03= 04= 05= 06= 07= spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM registered ECC PC3-8500 with thermal sensor spdmem1 at iic0 addr 0x52: 2GB DDR3 SDRAM registered ECC PC3-8500 with thermal sensor pciide1 at pci0 dev 31 function 5 Intel 82801JI SATA rev 0x00: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI pciide1: using apic 8 int 21 (irq 11) for native-PCI interrupt usb2 at uhci0: USB revision 1.0 uhub2 at usb2 Intel UHCI root hub rev 1.00/1.00 addr 1 usb3 at uhci1: USB revision 1.0 uhub3 at usb3 Intel UHCI root hub rev 1.00/1.00 addr 1 usb4 at uhci2: USB revision 1.0 uhub4 at usb4 Intel UHCI root hub rev 1.00/1.00 addr 1 usb5 at uhci3: USB revision 1.0 uhub5 at usb5 Intel UHCI root hub rev 1.00/1.00 addr 1 usb6 at uhci4: USB revision 1.0 uhub6 at usb6 Intel UHCI root hub rev 1.00/1.00 addr 1 usb7 at uhci5: USB revision 1.0 uhub7 at usb7 Intel UHCI root hub rev 1.00/1.00 addr 1 isa0 at pcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 kbc: cmd word write error pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker spkr0 at pcppi0 mtrr: Pentium Pro MTRR support umass0 at uhub1 port 1 configuration 1 interface 0 Genesys Logic USB Storage rev 2.00/0.41 addr 2 umass0: using SCSI over Bulk-Only scsibus0 at umass0: 2 targets, initiator 0 cd0 at scsibus0 targ 1 lun 0: TEAC, DV-28S-V, 1.0B SCSI0 5/cdrom removable uhidev0 at uhub6 port 1 configuration 1 interface 0 Cherry Mikroschalter product 0x0011 rev 2.00/1.00 addr 2 uhidev0: iclass 3/1 ukbd0 at uhidev0: 8 modifier keys, 6 key codes wskbd0 at ukbd0 mux 1 wskbd0: connecting to wsdisplay0 uhidev1 at uhub3 port 1 configuration 1 interface 0 Logitech USB Optical Mouse rev 2.00/43.01 addr 2 uhidev1: iclass 3/1 ums0 at uhidev1: 3 buttons, Z dir wsmouse0 at ums0 mux 0 uhidev2 at uhub4 port 1 configuration 1 interface 0 American Megatrends Inc. Virtual Keyboard and Mouse rev 1.10/1.00 addr 2 uhidev2: iclass 3/1 ukbd1 at uhidev2: 8 modifier keys, 6 key codes wskbd1 at ukbd1 mux 1 wskbd1: connecting to wsdisplay0 uhidev3 at uhub4 port 1 configuration 1 interface 1 American Megatrends Inc. Virtual Keyboard and Mouse rev 1.10/1.00 addr 2 uhidev3: iclass 3/1 ums1 at uhidev3 ums1: X report 0x0002 not supported softraid0 at root root on cd0a swap on cd0b dump on cd0b -Original Message- From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] On Behalf Of Koenig, Thomas Sent: Tuesday, February 02, 2010 7:03 PM To: Kenneth R Westerback; misc@openbsd.org Subject: Re: Snapshot 4.7: LSI SAS 1078 controller on Intel S5520UR - No disks found! Hi, I try it with both 4.6 and the latest snapshot and both with the same result. I already created a volume with the raidmanager, and if I boot up a linux system, I can see the harddisk. Booting up the system from BSDanywhere 4.6 live cd and take a look at dmesg (the complete log is attached) and I found: Symbios Logic SAS1078 rev 0x04 at pci22 dev 0 function 0 not configured regards, thomas -Original Message- From: Kenneth R Westerback [mailto:kwesterb...@rogers.com] Sent: Tuesday, February 02, 2010 4:43 PM To: Koenig, Thomas Subject: Re: Snapshot 4.7: LSI SAS 1078 controller on Intel S5520UR - No disks found! On Tue, Feb 02, 2010 at 02:56:30PM +0100, Koenig, Thomas wrote: Hi, I try to install the current snapshot on a Intel S5520UR board with LSI SAS 1078 controller. Install failed, because no disks found. If I not wrong, normaly the controller is supported since 4.3. by the mfi driver. The board has the latest available firmware installed. Does anyone have some hints for me, or are additional infos necessary? regard, Thomas When did it most recently work for you? 4.6? snapshots after 4.6? Can you provide a dmesg from the most recent kernel you have that works? Ken [demime 1.01d removed an attachment of type application/octet-stream which had a name of dmesg.log] [demime 1.01d removed an attachment of type application/x-pkcs7-signature which had a name of smime.p7s]
Re: Snapshot 4.7: LSI SAS 1078 controller on Intel S5520UR - No disks found!
Here are the not configured grep: l...@bsdanywhere:~$ dmesg | grep 'not configured' ipmi at mainbus0 not configured Intel X58 QuickPath rev 0x13 at pci0 dev 16 function 0 not configured Intel X58 QuickPath rev 0x13 at pci0 dev 16 function 1 not configured Intel X58 QuickPath rev 0x13 at pci0 dev 17 function 0 not configured Intel X58 QuickPath rev 0x13 at pci0 dev 17 function 1 not configured Intel X58 IOxAPIC rev 0x13 at pci0 dev 19 function 0 not configured Intel X58 Misc rev 0x13 at pci0 dev 20 function 0 not configured Intel X58 GPIO rev 0x13 at pci0 dev 20 function 1 not configured Intel X58 RAS rev 0x13 at pci0 dev 20 function 2 not configured Intel X58 Throttle rev 0x13 at pci0 dev 20 function 3 not configured vendor Intel, unknown product 0x342f (class system subclass interrupt, rev 0x13) at pci0 dev 21 function 0 not configured vendor Intel, unknown product 0x3430 (class system subclass miscellaneous, rev 0x13) at pci0 dev 22 function 0 not configured vendor Intel, unknown product 0x3431 (class system subclass miscellaneous, rev 0x13) at pci0 dev 22 function 1 not configured vendor Intel, unknown product 0x3432 (class system subclass miscellaneous, rev 0x13) at pci0 dev 22 function 2 not configured vendor Intel, unknown product 0x3433 (class system subclass miscellaneous, rev 0x13) at pci0 dev 22 function 3 not configured vendor Intel, unknown product 0x3429 (class system subclass miscellaneous, rev 0x13) at pci0 dev 22 function 4 not configured vendor Intel, unknown product 0x342a (class system subclass miscellaneous, rev 0x13) at pci0 dev 22 function 5 not configured vendor Intel, unknown product 0x342b (class system subclass miscellaneous, rev 0x13) at pci0 dev 22 function 6 not configured vendor Intel, unknown product 0x342c (class system subclass miscellaneous, rev 0x13) at pci0 dev 22 function 7 not configured Symbios Logic SAS1078 rev 0x04 at pci22 dev 0 function 0 not configured hopefully now without add. linebreaks. :) regards, tom -Original Message- From: owner-m...@openbsd.org [mailto:owner-m...@openbsd.org] On Behalf Of Stuart Henderson Sent: Tuesday, February 02, 2010 7:26 PM To: misc@openbsd.org Subject: Re: Snapshot 4.7: LSI SAS 1078 controller on Intel S5520UR - No disks found! On 2010-02-02, Koenig, Thomas tkoe...@tradegate.de wrote: Hi, I try to install the current snapshot on a Intel S5520UR board with LSI SAS 1078 controller. Install failed, because no disks found. If I not wrong, normaly the controller is supported since 4.3. by the mfi driver. The board has the latest available firmware installed. Does anyone have some hints for me, or are additional infos necessary? ^C into the shell from the installer, dmesg | grep 'not configured', copy any likely-looking lines (by hand if necessary). Also see http://www.openbsd.org/faq/faq4.html#getdmesg - the 'floppy disk' method will work for a USB drive, typically on device /dev/sd0i (or sd1i, etc) rather than /dev/fd0a. [demime 1.01d removed an attachment of type application/x-pkcs7-signature which had a name of smime.p7s]
Re: OpenBSD 4.2 on Intel Board S3000AHLX + QuadNic EXPI9404PT =couldn't map interrupt
Hi, with help form Insan Praja, I able to enable acpi now. But I have still the same problems with the QuadPort NIC. :( My last try was to build on this system a fresh new Kernel from the current CVS but still the same problem. dmesg from the snapshot from Thu Nov 8: OpenBSD 4.2-current (GENERIC) #2: Thu Nov 8 10:46:42 WIT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC real mem = 1069268992 (1019MB) avail mem = 1026822144 (979MB) User Kernel Config UKC disable apm UKC enable acpi 272 acpi0 enabled UKC quit Continuing... RTC BIOS diagnostic error ffixed_disk,invalid_time mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0x3fc1d000 (43 entries) bios0: vendor Intel Corporation version S3000.86B.02.00.0035.111020061326 date 11/10/2006 bios0: Intel S3000AHLX acpi0 at mainbus0: rev 0 acpi0: tables DSDT FACP APIC WDDT MCFG ASF! SSDT SSDT SSDT SSDT SSDT acpi0: wakeup devices SLPB(S4) P32_(S4) UAR1(S1) PEX4(S4) PEX5(S4) UHC1(S1) UHC2(S1) UHC3(S1) UHC4(S1) EHCI(S1) AC9M(S4) AZAL(S4) acpitimer at acpi0 not configured acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 9 (P32_) acpiprt2 at acpi0: bus 5 (PEX0) acpiprt3 at acpi0: bus 6 (PXS1) acpiprt4 at acpi0: bus -1 (PEX1) acpiprt5 at acpi0: bus -1 (PEX2) acpiprt6 at acpi0: bus -1 (PEX3) acpiprt7 at acpi0: bus 7 (PEX4) acpiprt8 at acpi0: bus 8 (PEX5) acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpibtn0 at acpi0: SLPB cpu0 at mainbus0: (uniprocessor) cpu0: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz, 2200.25 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2 ,CX16,xTPR,NXE,LONG cpu0: 2MB 64b/line 8-way L2 cache pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 Intel E7230 MCH rev 0x00 ppb0 at pci0 dev 1 function 0 Intel E7230 PCIE rev 0x00 pci1 at ppb0 bus 1 ppb1 at pci1 dev 0 function 0 vendor IDT, unknown product 0x8018 rev 0x04 pci2 at ppb1 bus 2 ppb2 at pci2 dev 0 function 0 vendor IDT, unknown product 0x8018 rev 0x04 pci3 at ppb2 bus 3 em0 at pci3 dev 0 function 0 Intel PRO/1000 QP (82571EB) rev 0x06pci_intr_map: bad interrupt line 128 : couldn't map interrupt em0: Allocation of PCI resources failed em1 at pci3 dev 0 function 1 Intel PRO/1000 QP (82571EB) rev 0x06pci_intr_map: bad interrupt line 128 : couldn't map interrupt em1: Allocation of PCI resources failed ppb3 at pci2 dev 1 function 0 vendor IDT, unknown product 0x8018 rev 0x04 pci4 at ppb3 bus 4 em2 at pci4 dev 0 function 0 Intel PRO/1000 QP (82571EB) rev 0x06pci_intr_map: bad interrupt line 128 : couldn't map interrupt em2: Allocation of PCI resources failed em3 at pci4 dev 0 function 1 Intel PRO/1000 QP (82571EB) rev 0x06pci_intr_map: bad interrupt line 128 : couldn't map interrupt em3: Allocation of PCI resources failed ppb4 at pci0 dev 28 function 0 Intel 82801GB PCIE rev 0x01 pci5 at ppb4 bus 5 ppb5 at pci5 dev 0 function 0 Intel PCIE-PCIE rev 0x09 pci6 at ppb5 bus 6 ppb6 at pci0 dev 28 function 4 Intel 82801G PCIE rev 0x01 pci7 at ppb6 bus 7 ppb7 at pci0 dev 28 function 5 Intel 82801G PCIE rev 0x01 pci8 at ppb7 bus 8 em4 at pci8 dev 0 function 0 Intel PRO/1000MT (82573E) rev 0x03: irq 9, address 00:15:17:29:70:25 Intel 82573E AMT rev 0x03 at pci8 dev 0 function 3 not configured Intel 82573E KCS (Active Management) rev 0x03 at pci8 dev 0 function 4 not configured ppb8 at pci0 dev 30 function 0 Intel 82801BA AGP rev 0xe1 pci9 at ppb8 bus 9 vga1 at pci9 dev 4 function 0 ATI ES1000 rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) em5 at pci9 dev 5 function 0 Intel PRO/1000MT (82541GI) rev 0x05: irq 9, address 00:15:17:29:70:26 pcib0 at pci0 dev 31 function 0 Intel 82801GB LPC rev 0x01 pciide0 at pci0 dev 31 function 1 Intel 82801GB IDE rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: Optiarc, DVD RW AD-7540A, 1.01 SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) pciide1 at pci0 dev 31 function 2 Intel 82801GB SATA rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using irq 10 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: Hitachi HDS721680PLA380 wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 ichiic0 at pci0 dev 31 function 3 Intel 82801GB SMBus rev 0x01: irq 10 iic0 at ichiic0 adt0 at iic0 addr 0x2e: emc6d100 rev 0x69 spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM ECC PC2-5300CL5 spdmem1 at iic0 addr 0x52: 512MB DDR2 SDRAM ECC PC2-5300CL5 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at
Re: OpenBSD 4.2 on Intel Board S3000AHLX + QuadNic EXPI9404PT =couldn't map interrupt
Looks like you need to update your bios, you are using old BIOS, the newest one is ver.44 (mine is). Try to upgrade the BIOS, and update us with good news :D (I Hope). Thanks, -- Insan Praja SW Hello Insan, I'm now on version .44, but this dont solve my problem. bios0 at mainbus0: SMBIOS rev. 2.4 @ 0x3fc03000 (43 entries) bios0: vendor Intel Corporation version S3000.86B.02.00.0044.071120071047 date 07/11/2007 bios0: Intel S3000AHLX : couldn't map interrupt em0: Allocation of PCI resources failed regards, Thomas [demime 1.01d removed an attachment of type application/x-pkcs7-signature which had a name of smime.p7s]
Re: OpenBSD 4.2 on Intel Board S3000AHLX + QuadNic EXPI9404PT =couldn't map interrupt
Hi, I got it! I try to build a GENERIC.MP for Marco - and now its running.I cant belive it. :) Thank you people, for your help. If you need some more tests with my hardware, let me know. regards, Thomas # dmesg OpenBSD 4.2-current (GENERIC.MP) #0: Mon Nov 12 08:00:48 MST 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 1069162496 (1019MB) avail mem = 1026580480 (979MB) User Kernel Config UKC disable apm UKC enable acpi 275 acpi0 enabled UKC quit Continuing... RTC BIOS diagnostic error ffixed_disk,invalid_time mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0x3fc03000 (43 entries) bios0: vendor Intel Corporation version S3000.86B.02.00.0044.071120071047 date 07/11/2007 bios0: Intel S3000AHLX acpi0 at mainbus0: rev 0 acpi0: tables DSDT FACP APIC WDDT MCFG ASF! SSDT SSDT SSDT SSDT SSDT acpi0: wakeup devices SLPB(S4) P32_(S4) UAR1(S1) PEX4(S4) PEX5(S4) UHC1(S1) UHC2(S1) UHC3(S1) UHC4(S1) EHCI(S1) AC9M(S4) AZAL(S4) acpitimer at acpi0 not configured acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz, 2200.22 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2 ,CX16,xTPR,NXE,LONG cpu0: 2MB 64b/line 8-way L2 cache cpu0: apic clock running at 199MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz, 2199.92 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2 ,CX16,xTPR,NXE,LONG cpu1: 2MB 64b/line 8-way L2 cache ioapic0 at mainbus0 apid 5 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 0, remapped to apid 5 ioapic1 at mainbus0 apid 6 pa 0xfec1, version 20, 24 pins acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus 9 (P32_) acpiprt2 at acpi0: bus 5 (PEX0) acpiprt3 at acpi0: bus 6 (PXS1) acpiprt4 at acpi0: bus -1 (PEX1) acpiprt5 at acpi0: bus -1 (PEX2) acpiprt6 at acpi0: bus -1 (PEX3) acpiprt7 at acpi0: bus 7 (PEX4) acpiprt8 at acpi0: bus 8 (PEX5) acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpicpu at acpi0 not configured acpibtn0 at acpi0: SLPB pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 Intel E7230 MCH rev 0x00 ppb0 at pci0 dev 1 function 0 Intel E7230 PCIE rev 0x00 pci1 at ppb0 bus 1 ppb1 at pci1 dev 0 function 0 vendor IDT, unknown product 0x8018 rev 0x04 pci2 at ppb1 bus 2 ppb2 at pci2 dev 0 function 0 vendor IDT, unknown product 0x8018 rev 0x04 pci3 at ppb2 bus 3 em0 at pci3 dev 0 function 0 Intel PRO/1000 QP (82571EB) rev 0x06: apic 5 int 16 (irq 128), address 00:15:17:4d:fe:c8 em1 at pci3 dev 0 function 1 Intel PRO/1000 QP (82571EB) rev 0x06: apic 5 int 17 (irq 128), address 00:15:17:4d:fe:c9 ppb3 at pci2 dev 1 function 0 vendor IDT, unknown product 0x8018 rev 0x04 pci4 at ppb3 bus 4 em2 at pci4 dev 0 function 0 Intel PRO/1000 QP (82571EB) rev 0x06: apic 5 int 17 (irq 128), address 00:15:17:4d:fe:ca em3 at pci4 dev 0 function 1 Intel PRO/1000 QP (82571EB) rev 0x06: apic 5 int 18 (irq 128), address 00:15:17:4d:fe:cb ppb4 at pci0 dev 28 function 0 Intel 82801GB PCIE rev 0x01 pci5 at ppb4 bus 5 ppb5 at pci5 dev 0 function 0 Intel PCIE-PCIE rev 0x09 pci6 at ppb5 bus 6 ppb6 at pci0 dev 28 function 4 Intel 82801G PCIE rev 0x01 pci7 at ppb6 bus 7 ppb7 at pci0 dev 28 function 5 Intel 82801G PCIE rev 0x01 pci8 at ppb7 bus 8 em4 at pci8 dev 0 function 0 Intel PRO/1000MT (82573E) rev 0x03: apic 5 int 17 (irq 9), address 00:15:17:29:70:25 Intel 82573E AMT rev 0x03 at pci8 dev 0 function 3 not configured Intel 82573E KCS (Active Management) rev 0x03 at pci8 dev 0 function 4 not configured ppb8 at pci0 dev 30 function 0 Intel 82801BA AGP rev 0xe1 pci9 at ppb8 bus 9 vga1 at pci9 dev 4 function 0 ATI ES1000 rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) em5 at pci9 dev 5 function 0 Intel PRO/1000MT (82541GI) rev 0x05: apic 5 int 17 (irq 9), address 00:15:17:29:70:26 pcib0 at pci0 dev 31 function 0 Intel 82801GB LPC rev 0x01 pciide0 at pci0 dev 31 function 1 Intel 82801GB IDE rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: Optiarc, DVD RW AD-7540A, 1.01 SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) pciide1 at pci0 dev 31 function 2 Intel 82801GB SATA rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using apic 5 int 19 (irq 10) for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: Hitachi HDS721680PLA380 wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors wd0(pciide1:0:0): using PIO
Re: OpenBSD 4.2 on Intel Board S3000AHLX + QuadNic EXPI9404PT =couldn't map interrupt
Hi, I downloaded the sources from CVS and build a new GENERIC Kernel, with the same result. :( The Kernel panic, after enable acpi, is now: malloc: allocation too large regards, Thomas [demime 1.01d removed an attachment of type application/x-pkcs7-signature which had a name of smime.p7s]
Re: OpenBSD 4.2 on Intel Board S3000AHLX + QuadNic EXPI9404PT = couldn't map interrupt
You need not to only enable ACPI, but also disable APM to make use of ACPI. it takes no effekt if I disable apm or not - every time I enable acpi I run into a PANIC. UKCdisable apm UKCenable acpi 263 acpi0 enabled UKCquit -- PANIC :( regards, Thomas [demime 1.01d removed an attachment of type application/x-pkcs7-signature which had a name of smime.p7s]
Re: OpenBSD 4.2 on Intel Board S3000AHLX + QuadNic EXPI9404PT = couldn't map interrupt
Hello, Showing the actual panic has more chances of something getting fixed. ok - here is the panic output, I hope anyone found something: acpi0: tables DSDT FACP APIC WDDT MCFG ASF! SSDT SSDT SSDT SSDT SSDT acpitimer at acpi0 not configured acpiprt0 at acpi0index.buf out of bounds: 6/6 0706 Called: \_SB_.PCI0._CRS panic: aml_die aml_derefvalue:1366 Stopped at Debugger+0x5: leave Debugger() at Debugger+0x5 panic() at panic+0x12a _aml_die() at _aml_die+0xdc aml_derefvalue() at aml_derefvalue+0x26f aml_evalterm() at aml_evalterm+0x32 aml_parseterm() at aml_parseterm+0x48 aml_parseref() at aml_parseref+0x11d aml_parseop() at aml_parseop+0xb4 aml_parseterm() at aml_parseterm+0x3a aml_parsewhile() at aml_parsewhile+0x4e end trace frame: 0x80ba8850, count: 0 RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC! DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION! ddb trace Debugger() at Debugger+0x5 panic() at panic+0x12a _aml_die() at _aml_die+0xdc aml_derefvalue() at aml_derefvalue+0x26f aml_evalterm() at aml_evalterm+0x32 aml_parseterm() at aml_parseterm+0x48 aml_parseref() at aml_parseref+0x11d aml_parseop() at aml_parseop+0xb4 aml_parseterm() at aml_parseterm+0x3a aml_parsewhile() at aml_parsewhile+0x4e aml_parseop() at aml_parseo+0xb4 aml_parseterm() at aml_parseterm+0x3a aml_callmethod() at aml_callmethod+0x3a aml_evalmethod() at aml_evalmethod+0x59 aml_derefvalue() at aml_derefvalue+0x7e aml_derefvalue() at aml_derefvalue+0x118 aml_evalterm() at aml_evalterm+0x32 aml_parseterm() at aml_parseterm+0x48 aml_callmethod() at aml_callmethod+0x3a aml_evalmethod() at aml_evalmethod+0x59 aml_evalnode() at aml_evalnode+0xd9 acpiprt_getpcibus() at acpiprt_getpcibus+0xd9 acpiprt_attach() at acpiprt_attach+0x28 config_attach() at config_attach+0x11b acpi_foundprt() at acpi_foundprt+0x4f aml_find_node() at aml_find_node+0x75 aml_find_node() at aml_find_node+0x58 aml_find_node() at aml_find_node+0x58 acpi_attach() at acpi_attach+0x3ea config_attach() at config_attach+0x11b mainbus_attach() at mainbus_attach+0x205 config_attach() at config_attach+0x11b cpu_configure() at cpu_configure+0x1c main() at main+0x39c end trace frame: 0x0, count: -34 ddb ps PIDPPID PGRPUID S FLAGS WAIT COMMAND *0 -1 0 0 70x80200swapper ddb show panic amldie aml_derefvalue:1366 ddb dmesg OpenBSD 4.2 (GENERIC) #1179: Tue Aug 28 10:37:50 MDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC real mem = 1069268992 (1019MB) avail mem = 1027013656 (979MB) User Kernel Config UKC enable acpi 263 acpi0 enabled UKC quit Continuing... RTC BIOS diagnostic error ffixed_disk,invalid_time mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0x3fc1d000 (43 entries) bios0: vendor Intel Corporation version S3000.86B.02.00.0035.111020061326 date 11/10/2006 bios0: Intel S3000AHLX acpi0 at mainbus0: rev 0 acpi0: tables DSDT FACP APIC WDDT MCFG ASF! SSDT SSDT SSDT SSDT SSDT acpitimer at acpi0 not configured acpiprt0 at acpi0index.buf out of bounds: 6/6 0706 Called: \_SB_.PCI0.EROM local0: 0x80020020 cnt:00 stk:60 interger: c local0: 0x80020060 cnt:00 stk:61 interger: 6 local0: 0x800200a0 cnt:00 stk:62 interger: 3 0706 Called: \_SB_.PCI0._CRS panic: aml_die aml_derefvalue:1366 Stopped at Debugger+0x5: leave Debugger() at Debugger+0x5 panic() at panic+0x12a _aml_die() at _aml_die+0xdc aml_derefvalue() at aml_derefvalue+0x26f aml_evalterm() at aml_evalterm+0x32 aml_parseterm() at aml_parseterm+0x48 aml_parseref() at aml_parseref+0x11d aml_parseop() at aml_parseop+0xb4 aml_parseterm() at aml_parseterm+0x3a aml_parsewhile() at aml_parsewhile+0x4e end trace frame: 0x80ba8850, count: 0 RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC! DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION! ddb Debugger() at Debugger+0x5 panic() at panic+0x12a _aml_die() at _aml_die+0xdc aml_derefvalue() at aml_derefvalue+0x26f aml_evalterm() at aml_evalterm+0x32 aml_parseterm() at aml_parseterm+0x48 aml_parseref() at aml_parseref+0x11d aml_parseop() at aml_parseop+0xb4 aml_parseterm() at aml_parseterm+0x3a aml_parsewhile() at aml_parsewhile+0x4e aml_parseop() at aml_parseo+0xb4 aml_parseterm() at aml_parseterm+0x3a aml_callmethod() at aml_callmethod+0x3a aml_evalmethod() at aml_evalmethod+0x59 aml_derefvalue() at aml_derefvalue+0x7e aml_derefvalue() at aml_derefvalue+0x118 aml_evalterm() at aml_evalterm+0x32 aml_parseterm() at aml_parseterm+0x48 aml_callmethod() at aml_callmethod+0x3a aml_evalmethod() at aml_evalmethod+0x59 aml_evalnode() at aml_evalnode+0xd9 acpiprt_getpcibus() at acpiprt_getpcibus+0xd9 acpiprt_attach() at acpiprt_attach+0x28 config_attach() at config_attach+0x11b acpi_foundprt() at acpi_foundprt+0x4f aml_find_node() at aml_find_node+0x75 aml_find_node() at aml_find_node+0x58 aml_find_node() at aml_find_node+0x58 acpi_attach() at
Re: OpenBSD 4.2 on Intel Board S3000AHLX + QuadNic EXPI9404PT =couldn't map interrupt
What version of OpenBSD are you running ? Several fixes have recently been added that made my machine suddenly support ACPI. You snipped this (very important) piece of information. Maybe trying the latest snapshot fixes your problem. Please also add a full dmesg (without acpi) so we don't have to guess what's in your machine. Hi, as you can see, the full dmesg output without acpi was included in my fist email! But currently I've installed the amd64 version and not i386, it was a try - but with both the same problems. and btw. you can find the Version I'm running in the dmesg/panic output in my last email, but however here the dmesg out without acpi from the current amd64 installation: OpenBSD 4.2 (GENERIC) #1179: Tue Aug 28 10:37:50 MDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/amd64/compile/GENERIC real mem = 1069268992 (1019MB) avail mem = 1027014656 (979MB) RTC BIOS diagnostic error ffixed_disk,invalid_time mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0x3fc1d000 (43 entries) bios0: vendor Intel Corporation version S3000.86B.02.00.0035.111020061326 date 11/10/2006 bios0: Intel S3000AHLX acpi at mainbus0 not configured cpu0 at mainbus0: (uniprocessor) cpu0: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz, 2200.18 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2 ,CX16,xTPR,NXE,LONG cpu0: 2MB 64b/line 8-way L2 cache pci0 at mainbus0 bus 0: configuration mode 1 pchb0 at pci0 dev 0 function 0 Intel E7230 MCH rev 0x00 ppb0 at pci0 dev 1 function 0 Intel E7230 PCIE rev 0x00 pci1 at ppb0 bus 1 ppb1 at pci1 dev 0 function 0 vendor IDT, unknown product 0x8018 rev 0x04 pci2 at ppb1 bus 2 ppb2 at pci2 dev 0 function 0 vendor IDT, unknown product 0x8018 rev 0x04 pci3 at ppb2 bus 3 em0 at pci3 dev 0 function 0 Intel PRO/1000 QP (82571EB) rev 0x06pci_intr_map: bad interrupt line 128 : couldn't map interrupt em0: Allocation of PCI resources failed em1 at pci3 dev 0 function 1 Intel PRO/1000 QP (82571EB) rev 0x06pci_intr_map: bad interrupt line 128 : couldn't map interrupt em1: Allocation of PCI resources failed ppb3 at pci2 dev 1 function 0 vendor IDT, unknown product 0x8018 rev 0x04 pci4 at ppb3 bus 4 em2 at pci4 dev 0 function 0 Intel PRO/1000 QP (82571EB) rev 0x06pci_intr_map: bad interrupt line 128 : couldn't map interrupt em2: Allocation of PCI resources failed em3 at pci4 dev 0 function 1 Intel PRO/1000 QP (82571EB) rev 0x06pci_intr_map: bad interrupt line 128 : couldn't map interrupt em3: Allocation of PCI resources failed ppb4 at pci0 dev 28 function 0 Intel 82801GB PCIE rev 0x01 pci5 at ppb4 bus 5 ppb5 at pci5 dev 0 function 0 Intel PCIE-PCIE rev 0x09 pci6 at ppb5 bus 6 ppb6 at pci0 dev 28 function 4 Intel 82801G PCIE rev 0x01 pci7 at ppb6 bus 7 ppb7 at pci0 dev 28 function 5 Intel 82801G PCIE rev 0x01 pci8 at ppb7 bus 8 em4 at pci8 dev 0 function 0 Intel PRO/1000MT (82573E) rev 0x03: irq 9, address 00:15:17:29:70:25 Intel 82573E AMT rev 0x03 at pci8 dev 0 function 3 not configured Intel 82573E KCS (Active Management) rev 0x03 at pci8 dev 0 function 4 not configured ppb8 at pci0 dev 30 function 0 Intel 82801BA AGP rev 0xe1 pci9 at ppb8 bus 9 vga1 at pci9 dev 4 function 0 ATI ES1000 rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) em5 at pci9 dev 5 function 0 Intel PRO/1000MT (82541GI) rev 0x05: irq 9, address 00:15:17:29:70:26 pcib0 at pci0 dev 31 function 0 Intel 82801GB LPC rev 0x01 pciide0 at pci0 dev 31 function 1 Intel 82801GB IDE rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: Optiarc, DVD RW AD-7540A, 1.01 SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) pciide1 at pci0 dev 31 function 2 Intel 82801GB SATA rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using irq 10 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: Hitachi HDS721680PLA380 wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 ichiic0 at pci0 dev 31 function 3 Intel 82801GB SMBus rev 0x01: irq 10 iic0 at ichiic0 adt0 at iic0 addr 0x2e: emc6d100 rev 0x69 isa0 at pcib0 isadma0 at isa0 com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker spkr0 at pcppi0 fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 dkcsum: wd0 matches BIOS drive 0x80 root on wd0a swap on wd0b dump on wd0b regards, Thomas [demime 1.01d removed an attachment of type application/x-pkcs7-signature which had a name of smime.p7s]
Re: OpenBSD 4.2 on Intel Board S3000AHLX + QuadNic EXPI9404PT =couldn't map interrupt
From: Stuart Henderson Try a snapshot. the latest one what I found was: OpenBSD 4.2-current (GENERIC) #452: Sun Oct 21 22:08:12 MDT 2007 dmesg looks like the same and if I enable acpi it runs in a kernel panic too. the panic output differs from the last, if someone interested I will post it. regards, Thomas # dmesg OpenBSD 4.2-current (GENERIC) #452: Sun Oct 21 22:08:12 MDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC RTC BIOS diagnostic error ffixed_disk,invalid_time cpu0: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz (GenuineIntel 686-class) 2.21 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2 ,CX16,xTPR real mem = 1069850624 (1020MB) avail mem = 1026707456 (979MB) RTC BIOS diagnostic error ffixed_disk,invalid_time mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 07/11/06, SMBIOS rev. 2.4 @ 0x3fc1d000 (43 entries) bios0: vendor Intel Corporation version S3000.86B.02.00.0035.111020061326 date 11/10/2006 bios0: Intel S3000AHLX pcibios at bios0 function 0x1a not configured bios0: ROM list: 0xc/0x9000 acpi at mainbus0 not configured cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 Intel E7230 MCH rev 0x00 ppb0 at pci0 dev 1 function 0 Intel E7230 PCIE rev 0x00 pci1 at ppb0 bus 1 ppb1 at pci1 dev 0 function 0 vendor IDT, unknown product 0x8018 rev 0x04 pci2 at ppb1 bus 2 ppb2 at pci2 dev 0 function 0 vendor IDT, unknown product 0x8018 rev 0x04 pci3 at ppb2 bus 3 em0 at pci3 dev 0 function 0 Intel PRO/1000 QP (82571EB) rev 0x06pci_intr_map: bad interrupt line 128 : couldn't map interrupt em0: Allocation of PCI resources failed em1 at pci3 dev 0 function 1 Intel PRO/1000 QP (82571EB) rev 0x06pci_intr_map: bad interrupt line 128 : couldn't map interrupt em1: Allocation of PCI resources failed ppb3 at pci2 dev 1 function 0 vendor IDT, unknown product 0x8018 rev 0x04 pci4 at ppb3 bus 4 em2 at pci4 dev 0 function 0 Intel PRO/1000 QP (82571EB) rev 0x06pci_intr_map: bad interrupt line 128 : couldn't map interrupt em2: Allocation of PCI resources failed em3 at pci4 dev 0 function 1 Intel PRO/1000 QP (82571EB) rev 0x06pci_intr_map: bad interrupt line 128 : couldn't map interrupt em3: Allocation of PCI resources failed ppb4 at pci0 dev 28 function 0 Intel 82801GB PCIE rev 0x01 pci5 at ppb4 bus 5 ppb5 at pci5 dev 0 function 0 Intel PCIE-PCIE rev 0x09 pci6 at ppb5 bus 6 ppb6 at pci0 dev 28 function 4 Intel 82801G PCIE rev 0x01 pci7 at ppb6 bus 7 ppb7 at pci0 dev 28 function 5 Intel 82801G PCIE rev 0x01 pci8 at ppb7 bus 8 em4 at pci8 dev 0 function 0 Intel PRO/1000MT (82573E) rev 0x03: irq 9, address 00:15:17:29:70:25 Intel 82573E AMT rev 0x03 at pci8 dev 0 function 3 not configured Intel 82573E KCS (Active Management) rev 0x03 at pci8 dev 0 function 4 not configured ppb8 at pci0 dev 30 function 0 Intel 82801BA AGP rev 0xe1 pci9 at ppb8 bus 9 vga1 at pci9 dev 4 function 0 ATI ES1000 rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) em5 at pci9 dev 5 function 0 Intel PRO/1000MT (82541GI) rev 0x05: irq 9, address 00:15:17:29:70:26 ichpcib0 at pci0 dev 31 function 0 Intel 82801GB LPC rev 0x01: PM disabled pciide0 at pci0 dev 31 function 1 Intel 82801GB IDE rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: Optiarc, DVD RW AD-7540A, 1.01 SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) pciide1 at pci0 dev 31 function 2 Intel 82801GB SATA rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using irq 10 for native-PCI interrupt wd0 at pciide1 channel 0 drive 0: Hitachi HDS721680PLA380 wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5 ichiic0 at pci0 dev 31 function 3 Intel 82801GB SMBus rev 0x01: irq 10 iic0 at ichiic0 adt0 at iic0 addr 0x2e: emc6d100 rev 0x69 spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM ECC PC2-5300CL5 spdmem1 at iic0 addr 0x52: 512MB DDR2 SDRAM ECC PC2-5300CL5 isa0 at ichpcib0 isadma0 at isa0 pckbc0 at isa0 port 0x60/5 pckbd0 at pckbc0 (kbd slot) pckbc0: using irq 1 for kbd slot wskbd0 at pckbd0: console keyboard, using wsdisplay0 pcppi0 at isa0 port 0x61 midi0 at pcppi0: PC speaker spkr0 at pcppi0 npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo fdc0 at isa0 port 0x3f0/6 irq 6 drq 2 biomask fded netmask ffed ttymask ffef pctr: user-level performance counters enabled mtrr: Pentium Pro MTRR support dkcsum: wd0 matches BIOS drive 0x80 root on wd0a swap on wd0b dump on wd0b [demime 1.01d removed an attachment of type application/x-pkcs7-signature which had a name
OpenBSD 4.2 on Intel Board S3000AHLX + QuadNic EXPI9404PT = couldn't map interrupt
Hello, - first: please excuse my poor english :) - second: I cant get my Intel Quad Server Adapter running on OpenBSD 4.2. My Hardware: -Intel Entry Server Board S3000AHLX -Intel Quad-Nic (Intel PRO/1000 PT Quad Server Adapter PCIex EXPI9404PT). The two Onboard Nic working fine as em4 and em5. dmesg shows me something like that: em0 at pci3 dev 0 function 0 Intel PRO/1000 QP (82571EB) rev 0x06pci_intr_map: bad interrupt line 128 : couldn't map interrupt em0: Allocation of PCI resources failed I think the Card itself is supported, because I have the low profile version EXPI9404PTL running in my Intel Board DG33TL. Some tests with FreeBSD 6.2 and Debian are successful, the Quad Nic is running there. I cant make any settings for Interrupts or somthing like that in the BIOS, because there are no options for this. Now my question - what can I do? There are any unstable Versions, with better support for the Board Chipset, or can I set some Kernel Parameters in the OS? here the full dmesg output: (I boot the System from a LiveCD) OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007 [EMAIL PROTECTED]:/usr/src/sys/arch/i386/compile/GENERIC RTC BIOS diagnostic error 3 cpu0: Intel(R) Core(TM)2 Duo CPU E4500 @ 2.20GHz (GenuineIntel 686-class) 2.21 GHz cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36, CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2 ,CX16,xTPR real mem = 1069789184 (1020MB) avail mem = 1026801664 (979MB) RTC BIOS diagnostic error 3 mainbus0 at root bios0 at mainbus0: AT/286+ BIOS, date 07/11/06, SMBIOS rev. 2.4 @ 0x3fc0e000 (43 entries) bios0: vendor Intel Corporation version S3000.86B.02.00.0035.111020061326 date 11/10/2006 bios0: Intel S3000AHLX pcibios at bios0 function 0x1a not configured bios0: ROM list: 0xc/0x9000 acpi at mainbus0 not configured cpu0 at mainbus0 pci0 at mainbus0 bus 0: configuration mode 1 (no bios) pchb0 at pci0 dev 0 function 0 Intel E7230 MCH rev 0x00 ppb0 at pci0 dev 1 function 0 Intel E7230 PCIE rev 0x00 pci1 at ppb0 bus 1 ppb1 at pci1 dev 0 function 0 vendor IDT, unknown product 0x8018 rev 0x04 pci2 at ppb1 bus 2 ppb2 at pci2 dev 0 function 0 vendor IDT, unknown product 0x8018 rev 0x04 pci3 at ppb2 bus 3 em0 at pci3 dev 0 function 0 Intel PRO/1000 QP (82571EB) rev 0x06pci_intr_map: bad interrupt line 128 : couldn't map interrupt em0: Allocation of PCI resources failed em1 at pci3 dev 0 function 1 Intel PRO/1000 QP (82571EB) rev 0x06pci_intr_map: bad interrupt line 128 : couldn't map interrupt em1: Allocation of PCI resources failed ppb3 at pci2 dev 1 function 0 vendor IDT, unknown product 0x8018 rev 0x04 pci4 at ppb3 bus 4 em2 at pci4 dev 0 function 0 Intel PRO/1000 QP (82571EB) rev 0x06pci_intr_map: bad interrupt line 128 : couldn't map interrupt em2: Allocation of PCI resources failed em3 at pci4 dev 0 function 1 Intel PRO/1000 QP (82571EB) rev 0x06pci_intr_map: bad interrupt line 128 : couldn't map interrupt em3: Allocation of PCI resources failed ppb4 at pci0 dev 28 function 0 Intel 82801GB PCIE rev 0x01 pci5 at ppb4 bus 5 ppb5 at pci5 dev 0 function 0 Intel PCIE-PCIE rev 0x09 pci6 at ppb5 bus 6 ppb6 at pci0 dev 28 function 4 Intel 82801G PCIE rev 0x01 pci7 at ppb6 bus 7 ppb7 at pci0 dev 28 function 5 Intel 82801G PCIE rev 0x01 pci8 at ppb7 bus 8 em4 at pci8 dev 0 function 0 Intel PRO/1000MT (82573E) rev 0x03: irq 9, address 00:15:17:29:7a:69 Intel 82573E AMT rev 0x03 at pci8 dev 0 function 3 not configured Intel 82573E KCS (Active Management) rev 0x03 at pci8 dev 0 function 4 not configured uhci0 at pci0 dev 29 function 0 Intel 82801GB USB rev 0x01: irq 11 uhci1 at pci0 dev 29 function 1 Intel 82801GB USB rev 0x01: irq 10 uhci2 at pci0 dev 29 function 2 Intel 82801GB USB rev 0x01: irq 11 uhci3 at pci0 dev 29 function 3 Intel 82801GB USB rev 0x01: irq 11 ehci0 at pci0 dev 29 function 7 Intel 82801GB USB rev 0x01: irq 11 usb0 at ehci0: USB revision 2.0 uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1 ppb8 at pci0 dev 30 function 0 Intel 82801BA AGP rev 0xe1 pci9 at ppb8 bus 9 vga1 at pci9 dev 4 function 0 ATI ES1000 rev 0x02 wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation) wsdisplay0: screen 1-5 added (80x25, vt100 emulation) em5 at pci9 dev 5 function 0 Intel PRO/1000MT (82541GI) rev 0x05: irq 9, address 00:15:17:29:7a:6a ichpcib0 at pci0 dev 31 function 0 Intel 82801GB LPC rev 0x01: PM disabled pciide0 at pci0 dev 31 function 1 Intel 82801GB IDE rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility atapiscsi0 at pciide0 channel 0 drive 0 scsibus0 at atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: Optiarc, DVD RW AD-7540A, 1.01 SCSI0 5/cdrom removable cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2 pciide0: channel 1 disabled (no drives) pciide1 at pci0 dev 31 function 2 Intel 82801GB SATA rev 0x01: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI pciide1: using irq 10 for native-PCI interrupt wd0
Re: OpenBSD 4.2 on Intel Board S3000AHLX + QuadNic EXPI9404PT = couldn't map interrupt
Hi, Have you tried to enable acpi? I try acpi with: boot -c enable acpi quit then I get a panic, with options for trace and ps - thats all. :( maybe its a bug? GENERIC.MP with acpi? Is this not the same as above? regards, Thomas [demime 1.01d removed an attachment of type application/x-pkcs7-signature which had a name of smime.p7s]
