Re: Can't boot Nov 21 amd64/bsd.rd - finishes at 'entry point'...
I was experimenting the same behaviour in my T410. With recent snapshots (november) or building a new GENERIC.MP kernel after update from CVS, the system freezes just when the boot process starts. I can confirm that the system boots normally after activate NX. In my thinkpad's bios the NX is located at: Security / Memory Protection / Execution Prevent I don't know if this behaviour is intentionally or a bug. In 5.6 stable the system boots though NX is deactivated. I must say too that the system is much more stable doing suspend/resume. With 5.6 stable the system tends to hang on resume. But with current suspend/resume works perfect. BR Jes
Re: Lenovo T500 doesn't boot [Was: Re: Can't boot Nov 21 amd64/bsd.rd - finishes at 'entry point'...]
On Wed, Nov 26, 2014 at 12:45:18PM -0800, Mike Larkin wrote: > On Wed, Nov 26, 2014 at 02:48:33PM -0500, Jiri B wrote: > > Does anybody have an archive for each amd64 snapshot? > > I'd like to check what is the latest amd64 kernel which can > > boot on T500. Nov 7 snapshot works OK but recent ones do not. > > > > I updated bios, ran memtest86+, still same problem. > > > > But... I see I don't have any getty, strange, I haven't > > observe it before as I use X. > > Can you verify you've enabled NX (sometimes called execute disable) > in your BIOS? We made some changes in this area recently and while > I did test on a non-NX setup, maybe we missed something. I see your > CPUID outputs in the dmesg that works don't have NXE, which leads > me to believe you disabled it in the BIOS for some reason (as your > CPU does support it). > > -ml Thank you Mike! I ran into the same problem moving from a Nov 16th snapshot to a Nov 19th (and then Nov 20th as main mirror had one day newer). I had gone into my bios and checked a few things over, i flipped the nx option and a couple other things to try, in typical bad diagnosic fashion :( and when it was fixed wasn't sure what it was. thank you! for sake of info here is my dmesg: (mac addys removed) -ryan OpenBSD 5.6-current (GENERIC.MP) #583: Thu Nov 20 11:47:06 MST 2014 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP RTC BIOS diagnostic error 30 real mem = 4066766848 (3878MB) avail mem = 3954667520 (3771MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xf2480 (70 entries) bios0: vendor Dell Inc. version "A05" date 08/10/2010 bios0: Dell Inc. Latitude E6410 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP APIC TCPA MCFG HPET BOOT SLIC SSDT acpi0: wakeup devices AGP_(S4) P0P1(S4) DIGC(S3) UAR1(S3) HDEF(S4) PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PXSX(S4) [...] acpitimer0 at acpi0: 3579545 Hz, 24 bits acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz, 2660.49 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges cpu0: apic clock running at 133MHz cpu1 at mainbus0: apid 4 (application processor) cpu1: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz, 2660.01 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 0, core 2, package 0 cpu2 at mainbus0: apid 1 (application processor) cpu2: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz, 2660.01 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC cpu2: 256KB 64b/line 8-way L2 cache cpu2: smt 1, core 0, package 0 cpu3 at mainbus0: apid 5 (application processor) cpu3: Intel(R) Core(TM) i5 CPU M 520 @ 2.40GHz, 2660.01 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF,PERF,ITSC cpu3: 256KB 64b/line 8-way L2 cache cpu3: smt 1, core 2, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins acpimcfg0 at acpi0 addr 0xf800, bus 0-63 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (AGP_) acpiprt2 at acpi0: bus 11 (P0P1) acpiprt3 at acpi0: bus 1 (RP01) acpiprt4 at acpi0: bus 2 (RP02) acpiprt5 at acpi0: bus 3 (RP03) acpiprt6 at acpi0: bus 5 (RP04) acpiprt7 at acpi0: bus -1 (RP05) acpiprt8 at acpi0: bus -1 (RP07) acpiprt9 at acpi0: bus -1 (RP08) acpiprt10 at acpi0: bus -1 (PEG3) acpiprt11 at acpi0: bus -1 (PEG5) acpiec0 at acpi0 acpicpu0 at acpi0: C3, C1, PSS acpicpu1 at acpi0: C3, C1, PSS acpicpu2 at acpi0: C3, C1, PSS acpicpu3 at acpi0: C3, C1, PSS acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: PBTN acpibtn2 at acpi0: SBTN acpiac0 at acpi0: AC unit online acpibat0 at acpi0: BAT0 model "DELL F8TTW24" serial 1689 type LION oem "SMP" acpibat1 at acpi0: BAT1 not present acpivideo0 at acpi0: VID_ acpivideo1 at acpi0: VID_ acpivout0 at acpivideo1: LCD_ cpu0: Enhanced SpeedStep 2660 MHz: speeds: 2400, 2399, 2266, 2133, 1999, 1866, 1733, 1599, 1466, 1333, 1199 MHz pci0 at mainbus0 bus 0 pchb0 at pci0
Re: Lenovo T500 doesn't boot [Was: Re: Can't boot Nov 21 amd64/bsd.rd - finishes at 'entry point'...]
On 2014 Nov 26 (Wed) at 23:25:45 + (+), Stuart Henderson wrote: :On 2014-11-26, Mike Larkin wrote: :> I think we've identified where the problem is, will test and commit :> shortly. : :Useful problem though, as it has highlighted several people who are running :with inadvisable BIOS settings. : I remember that my x240 shipped with NX disabled by default. I turned it on as soon as I could. -- Q: Why do ducks have flat feet? A: To stamp out forest fires. Q: Why do elephants have flat feet? A: To stamp out flaming ducks.
Re: Lenovo T500 doesn't boot [Was: Re: Can't boot Nov 21 amd64/bsd.rd - finishes at 'entry point'...]
On 27.11.2014 00:25, Stuart Henderson wrote: On 2014-11-26, Mike Larkin wrote: I think we've identified where the problem is, will test and commit shortly. Useful problem though, as it has highlighted several people who are running with inadvisable BIOS settings. Well it's corporations problem however. They are installing laptops or desktops with those features turned off and you will be surprised how often "security" team is bitching over me that I'm enabling those as their remote monitoring app then can't properly monitor my stuff :-) (and it's not only that of course, corporate apps crashing on those features turned on and so on)
Re: Lenovo T500 doesn't boot [Was: Re: Can't boot Nov 21 amd64/bsd.rd - finishes at 'entry point'...]
> On 2014-11-26, Mike Larkin wrote: > > I think we've identified where the problem is, will test and commit > > shortly. > > Useful problem though, as it has highlighted several people who are running > with inadvisable BIOS settings. Yes, it is highlighted in one email thread. Brilliant. Then what? Exactly.
Re: Lenovo T500 doesn't boot [Was: Re: Can't boot Nov 21 amd64/bsd.rd - finishes at 'entry point'...]
> You nailed it, with Data Execution Protection enabled it boots fine. > Thank you! I don't remember I was ever touching it... Those is another way of saying "I trusted the vendor. I never did the oversight to see if they are on my side."
Re: Lenovo T500 doesn't boot [Was: Re: Can't boot Nov 21 amd64/bsd.rd - finishes at 'entry point'...]
On 2014-11-26, Mike Larkin wrote: > I think we've identified where the problem is, will test and commit > shortly. Useful problem though, as it has highlighted several people who are running with inadvisable BIOS settings.
Re: Lenovo T500 doesn't boot [Was: Re: Can't boot Nov 21 amd64/bsd.rd - finishes at 'entry point'...]
On Wed, Nov 26, 2014 at 10:49:32PM +0100, pet...@schwertfisch.de wrote: > Mike Larkin wrote: > > > On Wed, Nov 26, 2014 at 02:48:33PM -0500, Jiri B wrote: > > > Does anybody have an archive for each amd64 snapshot? > > > I'd like to check what is the latest amd64 kernel which can > > > boot on T500. Nov 7 snapshot works OK but recent ones do not. > > > > > > I updated bios, ran memtest86+, still same problem. > > > > > > But... I see I don't have any getty, strange, I haven't > > > observe it before as I use X. > > > > Can you verify you've enabled NX (sometimes called execute disable) > > in your BIOS? We made some changes in this area recently and while > > I did test on a non-NX setup, maybe we missed something. I see your > > CPUID outputs in the dmesg that works don't have NXE, which leads > > me to believe you disabled it in the BIOS for some reason (as your > > CPU does support it). > > I've also had trouble booting bsd.rd for the last few days on a > Lenovo X220. > > This problem went away after changing the BIOS setup: > > Security -> Memory Protection -> Execution Prevention > [Disabled] -> [Enabled] > > My dmesg is included below. > > Regards > Dirk I think we've identified where the problem is, will test and commit shortly. Thanks to both for testing. -ml > > OpenBSD 5.6-current (GENERIC.MP) #614: Wed Nov 26 02:31:16 MST 2014 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 4156157952 (3963MB) > avail mem = 4041678848 (3854MB) > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xdae9c000 (65 entries) > bios0: vendor LENOVO version "8DET52WW (1.22 )" date 09/15/2011 > bios0: LENOVO 4290W1B > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SSDT SSDT SSDT HPET APIC MCFG ECDT ASF! TCPA SSDT > SSDT UEFI UEFI UEFI > acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EXP7(S4) EHC1(S3) > EHC2(S3) HDEF(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpihpet0 at acpi0: 14318179 Hz > acpimadt0 at acpi0 addr 0xfee0: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2492.30 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu0: 256KB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges > cpu0: apic clock running at 99MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2491.91 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu1: 256KB 64b/line 8-way L2 cache > cpu1: smt 1, core 0, package 0 > cpu2 at mainbus0: apid 2 (application processor) > cpu2: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2491.91 MHz > cpu2: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu2: 256KB 64b/line 8-way L2 cache > cpu2: smt 0, core 1, package 0 > cpu3 at mainbus0: apid 3 (application processor) > cpu3: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2491.91 MHz > cpu3: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC > cpu3: 256KB 64b/line 8-way L2 cache > cpu3: smt 1, core 1, package 0 > ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins > acpimcfg0 at acpi0 addr 0xf800, bus 0-63 > acpiec0 at acpi0 > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (PEG_) > acpiprt2 at acpi0: bus 2 (EXP1) > acpiprt3 at acpi0: bus 3 (EXP2) > acpiprt4 at acpi0: bus 5 (EXP4) > acpiprt5 at acpi0: bus 13 (EXP5) > acpiprt6 at acpi0: bus -1 (EXP7) > acpicpu0 at acpi0: C3, C1, PSS > acpicpu1 at acpi0: C3, C1, PSS > acpicpu2 at acpi0: C3, C1, PSS > acpicpu3 at acpi0: C3, C1, PSS > acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2 > acpitz0 at acpi0: critical temperature is 99 degC > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: SLPB > acpibat0 at acpi0: BAT0 model "42T4861" serial 5709 type LION oem "SANYO" > acpibat1 at acpi0: BAT1 not present > acpiac0 at acpi0: AC unit online > acpithinkpad0 at acpi0 > acpidock0 at acpi0: GDCK not docked (0) > cpu0: Enhanced SpeedStep 2492 MHz: speeds: 250
Re: Lenovo T500 doesn't boot [Was: Re: Can't boot Nov 21 amd64/bsd.rd - finishes at 'entry point'...]
Mike Larkin wrote: > On Wed, Nov 26, 2014 at 02:48:33PM -0500, Jiri B wrote: > > Does anybody have an archive for each amd64 snapshot? > > I'd like to check what is the latest amd64 kernel which can > > boot on T500. Nov 7 snapshot works OK but recent ones do not. > > > > I updated bios, ran memtest86+, still same problem. > > > > But... I see I don't have any getty, strange, I haven't > > observe it before as I use X. > > Can you verify you've enabled NX (sometimes called execute disable) > in your BIOS? We made some changes in this area recently and while > I did test on a non-NX setup, maybe we missed something. I see your > CPUID outputs in the dmesg that works don't have NXE, which leads > me to believe you disabled it in the BIOS for some reason (as your > CPU does support it). I've also had trouble booting bsd.rd for the last few days on a Lenovo X220. This problem went away after changing the BIOS setup: Security -> Memory Protection -> Execution Prevention [Disabled] -> [Enabled] My dmesg is included below. Regards Dirk OpenBSD 5.6-current (GENERIC.MP) #614: Wed Nov 26 02:31:16 MST 2014 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 4156157952 (3963MB) avail mem = 4041678848 (3854MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xdae9c000 (65 entries) bios0: vendor LENOVO version "8DET52WW (1.22 )" date 09/15/2011 bios0: LENOVO 4290W1B acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SSDT SSDT SSDT HPET APIC MCFG ECDT ASF! TCPA SSDT SSDT UEFI UEFI UEFI acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EXP7(S4) EHC1(S3) EHC2(S3) HDEF(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpihpet0 at acpi0: 14318179 Hz acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2492.30 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC cpu0: 256KB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges cpu0: apic clock running at 99MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2491.91 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC cpu1: 256KB 64b/line 8-way L2 cache cpu1: smt 1, core 0, package 0 cpu2 at mainbus0: apid 2 (application processor) cpu2: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2491.91 MHz cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC cpu2: 256KB 64b/line 8-way L2 cache cpu2: smt 0, core 1, package 0 cpu3 at mainbus0: apid 3 (application processor) cpu3: Intel(R) Core(TM) i5-2520M CPU @ 2.50GHz, 2491.91 MHz cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,NXE,LONG,LAHF,PERF,ITSC cpu3: 256KB 64b/line 8-way L2 cache cpu3: smt 1, core 1, package 0 ioapic0 at mainbus0: apid 2 pa 0xfec0, version 20, 24 pins acpimcfg0 at acpi0 addr 0xf800, bus 0-63 acpiec0 at acpi0 acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (PEG_) acpiprt2 at acpi0: bus 2 (EXP1) acpiprt3 at acpi0: bus 3 (EXP2) acpiprt4 at acpi0: bus 5 (EXP4) acpiprt5 at acpi0: bus 13 (EXP5) acpiprt6 at acpi0: bus -1 (EXP7) acpicpu0 at acpi0: C3, C1, PSS acpicpu1 at acpi0: C3, C1, PSS acpicpu2 at acpi0: C3, C1, PSS acpicpu3 at acpi0: C3, C1, PSS acpipwrres0 at acpi0: PUBS, resource for EHC1, EHC2 acpitz0 at acpi0: critical temperature is 99 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB acpibat0 at acpi0: BAT0 model "42T4861" serial 5709 type LION oem "SANYO" acpibat1 at acpi0: BAT1 not present acpiac0 at acpi0: AC unit online acpithinkpad0 at acpi0 acpidock0 at acpi0: GDCK not docked (0) cpu0: Enhanced SpeedStep 2492 MHz: speeds: 2501, 2500, 2200, 2000, 1800, 1600, 1400, 1200, 1000, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09 vga1 at pci0 dev 2 function 0 "Intel HD Graphics 3000" rev 0x09 intagp at vga1 not configured inteldrm0 at vga1 drm0 at inteldrm0 drm: Memory usable by graphics device = 2048M inteldrm0: 1366x768 wsdisplay0 at vga1 mux 1: console (std, vt100 e
Re: Lenovo T500 doesn't boot [Was: Re: Can't boot Nov 21 amd64/bsd.rd - finishes at 'entry point'...]
On Wed, Nov 26, 2014 at 12:45:18PM -0800, Mike Larkin wrote: > On Wed, Nov 26, 2014 at 02:48:33PM -0500, Jiri B wrote: > > Does anybody have an archive for each amd64 snapshot? > > I'd like to check what is the latest amd64 kernel which can > > boot on T500. Nov 7 snapshot works OK but recent ones do not. > > > > I updated bios, ran memtest86+, still same problem. > > > > But... I see I don't have any getty, strange, I haven't > > observe it before as I use X. > > Can you verify you've enabled NX (sometimes called execute disable) > in your BIOS? We made some changes in this area recently and while > I did test on a non-NX setup, maybe we missed something. I see your > CPUID outputs in the dmesg that works don't have NXE, which leads > me to believe you disabled it in the BIOS for some reason (as your > CPU does support it). You nailed it, with Data Execution Protection enabled it boots fine. Thank you! I don't remember I was ever touching it... Strange the issue with no gettys still exists... OpenBSD 5.6-current (GENERIC.MP) #606: Mon Nov 24 11:10:23 MST 2014 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 4163571712 (3970MB) avail mem = 4048896000 (3861MB) mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (80 entries) bios0: vendor LENOVO version "6FET93WW (3.23 )" date 10/12/2012 bios0: LENOVO 2089A35 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA DMAR SSDT SSDT SSDT acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) IGBE(S4) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB3(S3) USB5(S3) EHC0(S3) EHC1(S3) HDEF(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpiec0 at acpi0 acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.31 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF cpu0: 3MB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges cpu0: apic clock running at 265MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.00 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,NXE,LONG,LAHF,PERF cpu1: 3MB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 1 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 2, remapped to apid 1 acpimcfg0 at acpi0 addr 0xe000, bus 0-63 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (AGP_) acpiprt2 at acpi0: bus 2 (EXP0) acpiprt3 at acpi0: bus 3 (EXP1) acpiprt4 at acpi0: bus -1 (EXP2) acpiprt5 at acpi0: bus -1 (EXP3) acpiprt6 at acpi0: bus 13 (EXP4) acpiprt7 at acpi0: bus 21 (PCI1) acpicpu0 at acpi0: C3, C2, C1, PSS acpicpu1 at acpi0: C3, C2, C1, PSS acpipwrres0 at acpi0: PUBS, resource for USB0, USB3, USB5, EHC0, EHC1 acpitz0 at acpi0: critical temperature is 127 degC acpitz1 at acpi0: critical temperature is 100 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB acpibat0 at acpi0: BAT0 model "42T4621" serial 1562 type LION oem "SANYO" acpibat1 at acpi0: BAT1 not present acpiac0 at acpi0: AC unit online acpithinkpad0 at acpi0 acpidock0 at acpi0: GDCK not docked (0) cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2401, 2400, 1600, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07 intagp0 at vga1 agp0 at intagp0: aperture at 0xd000, size 0x1000 inteldrm0 at vga1 drm0 at inteldrm0 inteldrm0: 1680x1050 wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, address 00:27:13:b7:d2:45 uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi azalia0: codecs: Conexant CX20561 audio0 at azalia0 ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: msi pci1 at ppb0 bus 2 ppb1 at pci0 dev 28 function 1 "Intel 828
Re: Lenovo T500 doesn't boot [Was: Re: Can't boot Nov 21 amd64/bsd.rd - finishes at 'entry point'...]
On Wed, Nov 26, 2014 at 02:48:33PM -0500, Jiri B wrote: > Does anybody have an archive for each amd64 snapshot? > I'd like to check what is the latest amd64 kernel which can > boot on T500. Nov 7 snapshot works OK but recent ones do not. > > I updated bios, ran memtest86+, still same problem. > > But... I see I don't have any getty, strange, I haven't > observe it before as I use X. Can you verify you've enabled NX (sometimes called execute disable) in your BIOS? We made some changes in this area recently and while I did test on a non-NX setup, maybe we missed something. I see your CPUID outputs in the dmesg that works don't have NXE, which leads me to believe you disabled it in the BIOS for some reason (as your CPU does support it). -ml > > USER PID %CPU %MEM VSZ RSS TT STAT STARTED TIME COMMAND > root 1 0.0 0.0 604 540 ?? Ss 8:26PM0:01.07 /sbin/init > root 16946 0.0 0.0 796 988 ?? Is 8:26PM0:00.00 syslogd: > [priv] (syslogd) > _syslogd 27946 0.0 0.0 796 1104 ?? S 8:26PM0:00.08 > /usr/sbin/syslogd > root 30726 0.0 0.0 824 584 ?? Is 8:26PM0:00.01 pflogd: > [priv] (pflogd) > _pflogd 1386 0.0 0.0 888 368 ?? S 8:26PM0:00.06 pflogd: > [running] -s 160 -i pflog0 -f /var/log/pflog (pflogd) > root 6328 0.0 0.0 1160 1352 ?? Is 8:26PM0:00.00 > /usr/sbin/sshd > _smtpd1994 0.0 0.1 1608 2776 ?? I 8:26PM0:00.01 smtpd: pony > express (smtpd) > _smtpd 32643 0.0 0.0 1452 1968 ?? I 8:26PM0:00.00 smtpd: > klondike (smtpd) > root 3845 0.0 0.1 1584 2204 ?? Is 8:26PM0:00.01 smtpd: > [priv] (smtpd) > _smtpq 27223 0.0 0.1 1584 2252 ?? I 8:26PM0:00.01 smtpd: > queue (smtpd) > _smtpd 15481 0.0 0.1 1724 2308 ?? I 8:26PM0:00.00 smtpd: > control (smtpd) > _smtpd4473 0.0 0.1 1588 2308 ?? I 8:26PM0:00.00 smtpd: > lookup (smtpd) > _smtpd4297 0.0 0.0 1380 1980 ?? I 8:26PM0:00.00 smtpd: > scheduler (smtpd) > _sndio 32512 0.0 0.0 752 964 ?? I /usr/bin/sndiod > _dnscrypt-proxy 18418 0.0 0.0 1072 1416 ?? Is 8:26PM0:00.01 > /usr/local/sbin/dnscrypt-proxy -d --user=_dnscrypt-proxy > --local-address=127.0.0.1:5331 --user=_dnsc > _pdnsd 18198 0.0 0.1 4400 5004 ?? I 8:26PM0:00.02 > /usr/local/sbin/pdnsd -d > _mpd 4212 0.0 0.2 16144 7864 ?? Is 8:26PM0:00.02 > /usr/local/sbin/mpd > root 26670 0.0 0.0 540 908 ?? Ss 8:26PM0:00.00 > /usr/sbin/apmd -A > root 25744 0.0 0.0 812 1168 ?? Ss 8:26PM0:00.00 > /usr/sbin/cron > root 28624 0.0 0.0 796 1968 ?? Is 8:26PM0:00.04 > /usr/X11R6/bin/xdm > _x11 20501 0.0 0.6 16252 24784 ?? Ss 8:26PM0:03.01 > /usr/X11R6/bin/X :0 vt05 -auth /etc/X11/xdm/authdir/authfiles/A:0-hh1yAL > (Xorg) > root 4464 0.0 0.0 2504 1356 ?? I 8:26PM0:00.03 X: [priv] > (Xorg) > root 5150 0.0 0.2 1416 6448 ?? Is 8:26PM0:00.17 xdm: :0 > (xdm) > jirib 5092 0.0 0.0 636 664 ?? Is 8:26PM0:00.02 /bin/sh > /etc/X11/xdm/Xsession > jirib 1893 0.0 0.0 692 1704 ?? Is 8:26PM0:00.01 ssh-agent -s > jirib 3965 0.0 0.1 1008 5560 ?? I 8:26PM0:00.03 cwm > jirib29718 0.0 0.0 852 1720 ?? I 8:26PM0:00.00 dbus-launch > --sh-syntax --exit-with-session > jirib20225 0.0 0.0 928 1164 ?? Is 8:26PM0:00.00 > /usr/local/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session > jirib 9543 0.0 0.1 592 2276 ?? I 8:26PM0:00.01 xidle > jirib24260 0.0 0.1 1608 3336 ?? S 8:26PM0:00.20 xstatbar -f > -misc-fixed-medium-r-normal--13-120-75-75-c-80-iso10646-1 -w 1680 -h 14 > jirib 3144 0.0 0.3 7868 13696 ?? S 8:26PM0:00.39 xterm > -class UXTerm > jirib25699 0.0 0.1 2080 3636 ?? Ss 8:26PM0:00.61 tmux: > server (/tmp/tmux-1001/default) (tmux) > root 21781 0.0 0.0 764 568 ?? S 8:34PM0:00.00 /sbin/init > root 10920 0.0 0.0 768 584 ?? S 8:34PM0:00.00 /sbin/init > root 18579 0.0 0.0 772 600 ?? S 8:34PM0:00.00 /sbin/init > root 26966 0.0 0.0 764 580 ?? S 8:34PM0:00.00 /sbin/init > root 28783 0.0 0.0 760 576 ?? S 8:34PM0:00.00 /sbin/init > ^^^ > > > jirib10749 0.0 0.0 680 844 p0 Is 8:26PM0:00.01 -ksh (ksh) > jirib12212 0.0 0.0 992 1964 p0 I+ 8:26PM0:00.01 tmux: > client (/tmp/tmux-1001/default) (tmux) > jirib 3196 0.0 0.0 724 824 p1 Is 8:26PM0:00.03 -ksh (ksh) > root 16221 0.0 0.0 740 732 p1 S 8:31PM0:00.08 -ksh (ksh) > root 6363 0.0 0.0 480 404 p1 R+ 8:35PM0:00.00 ps -aux > > Using drive 0, partition 3. > Load
Lenovo T500 doesn't boot [Was: Re: Can't boot Nov 21 amd64/bsd.rd - finishes at 'entry point'...]
Does anybody have an archive for each amd64 snapshot? I'd like to check what is the latest amd64 kernel which can boot on T500. Nov 7 snapshot works OK but recent ones do not. I updated bios, ran memtest86+, still same problem. But... I see I don't have any getty, strange, I haven't observe it before as I use X. USER PID %CPU %MEM VSZ RSS TT STAT STARTED TIME COMMAND root 1 0.0 0.0 604 540 ?? Ss 8:26PM0:01.07 /sbin/init root 16946 0.0 0.0 796 988 ?? Is 8:26PM0:00.00 syslogd: [priv] (syslogd) _syslogd 27946 0.0 0.0 796 1104 ?? S 8:26PM0:00.08 /usr/sbin/syslogd root 30726 0.0 0.0 824 584 ?? Is 8:26PM0:00.01 pflogd: [priv] (pflogd) _pflogd 1386 0.0 0.0 888 368 ?? S 8:26PM0:00.06 pflogd: [running] -s 160 -i pflog0 -f /var/log/pflog (pflogd) root 6328 0.0 0.0 1160 1352 ?? Is 8:26PM0:00.00 /usr/sbin/sshd _smtpd1994 0.0 0.1 1608 2776 ?? I 8:26PM0:00.01 smtpd: pony express (smtpd) _smtpd 32643 0.0 0.0 1452 1968 ?? I 8:26PM0:00.00 smtpd: klondike (smtpd) root 3845 0.0 0.1 1584 2204 ?? Is 8:26PM0:00.01 smtpd: [priv] (smtpd) _smtpq 27223 0.0 0.1 1584 2252 ?? I 8:26PM0:00.01 smtpd: queue (smtpd) _smtpd 15481 0.0 0.1 1724 2308 ?? I 8:26PM0:00.00 smtpd: control (smtpd) _smtpd4473 0.0 0.1 1588 2308 ?? I 8:26PM0:00.00 smtpd: lookup (smtpd) _smtpd4297 0.0 0.0 1380 1980 ?? I 8:26PM0:00.00 smtpd: scheduler (smtpd) _sndio 32512 0.0 0.0 752 964 ?? I bsd.rd booting sr0a:bsd.rd: 3203048+1369615+2401280+0+517104 [72+351936+229073]=0x7b445 0 entry point at 0x1000160 [7205c766, 3404, 24448b12, 9670a304] _ > I don't know what else I could provide, I can't boot anymore > bsd.mp, bsd.rd and even cdboot.iso I burnt (all amd64). > > They all finish on just 2nd line as state above, no idea. If > those numbers are important I would do a photo (laptop, no > console) and write it down. > > How else could I help? > > OpenBSD 5.6-current (GENERIC.MP) #544: Fri Nov 7 10:36:24 MST 2014 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 4166717440 (3973MB) > avail mem = 4051992576 (3864MB) > warning: no entropy supplied by boot loader > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (80 entries) > bios0: vendor LENOVO version "6FET82WW (3.12 )" date 11/26/2009 > bios0: LENOVO 2089A35 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA > DMAR SSDT SSDT SSDT > acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) IGBE(S4) EXP0(S4) EXP1(S4) > EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB3(S3) USB5(S3) EHC0(S3) > EHC1(S3) HDEF(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpiec0 at acpi0 > acpimadt0 at acpi0 addr 0xfee0: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.37 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LONG,LAHF,PERF > cpu0: 3MB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges > cpu0: apic clock running at 266MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.01 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LONG,LAHF,PERF > cpu1: 3MB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > ioapic0 at mainbus0: apid 1 pa 0xfec0, version 20, 24 pins > ioapic0: misconfigured as apic 2, remapped to apid 1 > acpimcfg0 at acpi0 addr 0xe000, bus 0-63 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (AGP_) > acpiprt2 at acpi0: bus 2 (EXP0) > acpiprt3 at acpi0: bus 3 (EXP1) > acpiprt4 at acpi0: bus -1 (EXP2) > acpiprt5 at acpi0: bus -1 (EXP3) > acpiprt6 at acpi0: bus 13 (EXP4) > acpiprt7 at acpi0: bus 21 (PCI1) > acpicpu0 at acpi0: C3, C2, C1, PSS > acpicpu1 at acpi0: C3, C2, C1, PSS > acpipwrres0 at acpi0: PUBS, resource for USB0, USB3, USB5, EHC0, EHC1 > acpitz0 at acpi0: critical temperature is 127 degC > acpitz1 at acpi0: critical temperature is 100 degC > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: SLPB > acpibat0 at acpi0: BAT0 model "42T4621" serial 1562 type LION oem "SANYO" > acpibat1 at acpi0: BAT1 not present > acpiac0 at acpi0: AC unit online > acpithinkpad0 at acpi0 > acpidock0 at acpi0: GDCK not docked (0) > cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2401, 2400, 1600, 800 MHz > pci0 at ma
Re: Can't boot Nov 21 amd64/bsd.rd - finishes at 'entry point'...
On Mon, Nov 24, 2014 at 05:14:10PM -0500, Jiri B wrote: > On Sat, Nov 22, 2014 at 12:40:22PM -0700, Theo de Raadt wrote: > > > I can't boot bsd.rd (amd64) from Nov 21 2014. I've tried to > > > upgrade my FDE-based amd64 installation. > > > > > > I entered passphrase for crypto softraid in boot loader, typed > > > 'bsd.rd' and after one line it finished: > > > > > > entry point at 0x1000160 [7205c768, 3404, 24448b12, 6670a304] > > > > > > (I hope I wrote it down correctly.) > > > > As you and other readers of this list know very well, the above > > is an incomplete bug report. > > > > It is nice to know that you have spotted a problem, but there simply > > is not enough information for anyone to move forward. I just tested > > the same stuff on 3 of my machines. > > > > Considering the effort we put into making this code, please put a bit > > more effort into it yourself? Thanks. > > Hi, > > yeah I should have to include my working dmesg, so here it is from > my Lenovo T500. > > I don't know what else I could provide, I can't boot anymore > bsd.mp, bsd.rd and even cdboot.iso I burnt (all amd64). > > They all finish on just 2nd line as state above, no idea. If > those numbers are important I would do a photo (laptop, no > console) and write it down. > > How else could I help? Try a newer snapshot and let us know if it is still broken. -ml > > OpenBSD 5.6-current (GENERIC.MP) #544: Fri Nov 7 10:36:24 MST 2014 > dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP > real mem = 4166717440 (3973MB) > avail mem = 4051992576 (3864MB) > warning: no entropy supplied by boot loader > mpath0 at root > scsibus0 at mpath0: 256 targets > mainbus0 at root > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (80 entries) > bios0: vendor LENOVO version "6FET82WW (3.12 )" date 11/26/2009 > bios0: LENOVO 2089A35 > acpi0 at bios0: rev 2 > acpi0: sleep states S0 S3 S4 S5 > acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA > DMAR SSDT SSDT SSDT > acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) IGBE(S4) EXP0(S4) EXP1(S4) > EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB3(S3) USB5(S3) EHC0(S3) > EHC1(S3) HDEF(S4) > acpitimer0 at acpi0: 3579545 Hz, 24 bits > acpiec0 at acpi0 > acpimadt0 at acpi0 addr 0xfee0: PC-AT compat > cpu0 at mainbus0: apid 0 (boot processor) > cpu0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.37 MHz > cpu0: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LONG,LAHF,PERF > cpu0: 3MB 64b/line 8-way L2 cache > cpu0: smt 0, core 0, package 0 > mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges > cpu0: apic clock running at 266MHz > cpu1 at mainbus0: apid 1 (application processor) > cpu1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.01 MHz > cpu1: > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LONG,LAHF,PERF > cpu1: 3MB 64b/line 8-way L2 cache > cpu1: smt 0, core 1, package 0 > ioapic0 at mainbus0: apid 1 pa 0xfec0, version 20, 24 pins > ioapic0: misconfigured as apic 2, remapped to apid 1 > acpimcfg0 at acpi0 addr 0xe000, bus 0-63 > acpihpet0 at acpi0: 14318179 Hz > acpiprt0 at acpi0: bus 0 (PCI0) > acpiprt1 at acpi0: bus -1 (AGP_) > acpiprt2 at acpi0: bus 2 (EXP0) > acpiprt3 at acpi0: bus 3 (EXP1) > acpiprt4 at acpi0: bus -1 (EXP2) > acpiprt5 at acpi0: bus -1 (EXP3) > acpiprt6 at acpi0: bus 13 (EXP4) > acpiprt7 at acpi0: bus 21 (PCI1) > acpicpu0 at acpi0: C3, C2, C1, PSS > acpicpu1 at acpi0: C3, C2, C1, PSS > acpipwrres0 at acpi0: PUBS, resource for USB0, USB3, USB5, EHC0, EHC1 > acpitz0 at acpi0: critical temperature is 127 degC > acpitz1 at acpi0: critical temperature is 100 degC > acpibtn0 at acpi0: LID_ > acpibtn1 at acpi0: SLPB > acpibat0 at acpi0: BAT0 model "42T4621" serial 1562 type LION oem "SANYO" > acpibat1 at acpi0: BAT1 not present > acpiac0 at acpi0: AC unit online > acpithinkpad0 at acpi0 > acpidock0 at acpi0: GDCK not docked (0) > cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2401, 2400, 1600, 800 MHz > pci0 at mainbus0 bus 0 > pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 > vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07 > intagp0 at vga1 > agp0 at intagp0: aperture at 0xd000, size 0x1000 > inteldrm0 at vga1 > drm0 at inteldrm0 > inteldrm0: 1680x1050 > wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) > wsdisplay0: screen 1-5 added (std, vt100 emulation) > "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured > "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured > em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, address > 00:27:13:b7:d2:45 > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20 > uhci1 at
Re: Can't boot Nov 21 amd64/bsd.rd - finishes at 'entry point'...
On Sat, Nov 22, 2014 at 12:40:22PM -0700, Theo de Raadt wrote: > > I can't boot bsd.rd (amd64) from Nov 21 2014. I've tried to > > upgrade my FDE-based amd64 installation. > > > > I entered passphrase for crypto softraid in boot loader, typed > > 'bsd.rd' and after one line it finished: > > > > entry point at 0x1000160 [7205c768, 3404, 24448b12, 6670a304] > > > > (I hope I wrote it down correctly.) > > As you and other readers of this list know very well, the above > is an incomplete bug report. > > It is nice to know that you have spotted a problem, but there simply > is not enough information for anyone to move forward. I just tested > the same stuff on 3 of my machines. > > Considering the effort we put into making this code, please put a bit > more effort into it yourself? Thanks. Hi, yeah I should have to include my working dmesg, so here it is from my Lenovo T500. I don't know what else I could provide, I can't boot anymore bsd.mp, bsd.rd and even cdboot.iso I burnt (all amd64). They all finish on just 2nd line as state above, no idea. If those numbers are important I would do a photo (laptop, no console) and write it down. How else could I help? OpenBSD 5.6-current (GENERIC.MP) #544: Fri Nov 7 10:36:24 MST 2014 dera...@amd64.openbsd.org:/usr/src/sys/arch/amd64/compile/GENERIC.MP real mem = 4166717440 (3973MB) avail mem = 4051992576 (3864MB) warning: no entropy supplied by boot loader mpath0 at root scsibus0 at mpath0: 256 targets mainbus0 at root bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (80 entries) bios0: vendor LENOVO version "6FET82WW (3.12 )" date 11/26/2009 bios0: LENOVO 2089A35 acpi0 at bios0: rev 2 acpi0: sleep states S0 S3 S4 S5 acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA DMAR SSDT SSDT SSDT acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) IGBE(S4) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB3(S3) USB5(S3) EHC0(S3) EHC1(S3) HDEF(S4) acpitimer0 at acpi0: 3579545 Hz, 24 bits acpiec0 at acpi0 acpimadt0 at acpi0 addr 0xfee0: PC-AT compat cpu0 at mainbus0: apid 0 (boot processor) cpu0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.37 MHz cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LONG,LAHF,PERF cpu0: 3MB 64b/line 8-way L2 cache cpu0: smt 0, core 0, package 0 mtrr: Pentium Pro MTRR support, 7 var ranges, 88 fixed ranges cpu0: apic clock running at 266MHz cpu1 at mainbus0: apid 1 (application processor) cpu1: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz, 2394.01 MHz cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LONG,LAHF,PERF cpu1: 3MB 64b/line 8-way L2 cache cpu1: smt 0, core 1, package 0 ioapic0 at mainbus0: apid 1 pa 0xfec0, version 20, 24 pins ioapic0: misconfigured as apic 2, remapped to apid 1 acpimcfg0 at acpi0 addr 0xe000, bus 0-63 acpihpet0 at acpi0: 14318179 Hz acpiprt0 at acpi0: bus 0 (PCI0) acpiprt1 at acpi0: bus -1 (AGP_) acpiprt2 at acpi0: bus 2 (EXP0) acpiprt3 at acpi0: bus 3 (EXP1) acpiprt4 at acpi0: bus -1 (EXP2) acpiprt5 at acpi0: bus -1 (EXP3) acpiprt6 at acpi0: bus 13 (EXP4) acpiprt7 at acpi0: bus 21 (PCI1) acpicpu0 at acpi0: C3, C2, C1, PSS acpicpu1 at acpi0: C3, C2, C1, PSS acpipwrres0 at acpi0: PUBS, resource for USB0, USB3, USB5, EHC0, EHC1 acpitz0 at acpi0: critical temperature is 127 degC acpitz1 at acpi0: critical temperature is 100 degC acpibtn0 at acpi0: LID_ acpibtn1 at acpi0: SLPB acpibat0 at acpi0: BAT0 model "42T4621" serial 1562 type LION oem "SANYO" acpibat1 at acpi0: BAT1 not present acpiac0 at acpi0: AC unit online acpithinkpad0 at acpi0 acpidock0 at acpi0: GDCK not docked (0) cpu0: Enhanced SpeedStep 2394 MHz: speeds: 2401, 2400, 1600, 800 MHz pci0 at mainbus0 bus 0 pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07 vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07 intagp0 at vga1 agp0 at intagp0: aperture at 0xd000, size 0x1000 inteldrm0 at vga1 drm0 at inteldrm0 inteldrm0: 1680x1050 wsdisplay0 at vga1 mux 1: console (std, vt100 emulation) wsdisplay0: screen 1-5 added (std, vt100 emulation) "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, address 00:27:13:b7:d2:45 uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20 uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21 uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22 ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23 usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1 azalia0 at pci0 dev 27 function 0 "Inte
Re: Can't boot Nov 21 amd64/bsd.rd - finishes at 'entry point'...
> I can't boot bsd.rd (amd64) from Nov 21 2014. I've tried to > upgrade my FDE-based amd64 installation. > > I entered passphrase for crypto softraid in boot loader, typed > 'bsd.rd' and after one line it finished: > > entry point at 0x1000160 [7205c768, 3404, 24448b12, 6670a304] > > (I hope I wrote it down correctly.) As you and other readers of this list know very well, the above is an incomplete bug report. It is nice to know that you have spotted a problem, but there simply is not enough information for anyone to move forward. I just tested the same stuff on 3 of my machines. Considering the effort we put into making this code, please put a bit more effort into it yourself? Thanks.
