* Insan Praja SW [EMAIL PROTECTED] [2008-02-04 11:48]:
On Fri, 25 Jan 2008 16:28:42 +0700, Henning Brauer [EMAIL PROTECTED]
wrote:
* Insan Praja SW [EMAIL PROTECTED] [2008-01-24 18:43]:
Hi Misc@,
I'm currently setup bgp router using openbgp. Routes learned from
openbgpd
are stored in routing table 1. So, I got this client from NET2, coming
from
the same interface that my ibgp peer coming from, and I want to pass
client
from NET2 going to regional exchange to QUAGGA router. I got no luck
with:
pass on $ext_if from $NET2 to any modulate state rtable 1, NET2 always
use the default route via $ext_if when going to regional exchange
I appreciate any input and suggestion regarding this.
assigning an rtable decision on the outbond interface is too late,
since the routang decision has already been taken then. yu have to do
it in the inbound direction. that is true for the reverse path too.
Hi Misc@,
finally figured out how to use bgpd rtable into pf, and pftable and I get
more curious. When I use route table 1, should all routes learned from
default route copied to rtable 1 or I had to build it on my own? and when I
did, I'm having problem with directly connected network, which I cannot
insert mac address as default gateway, while using default rtable I see
some of directly connected system/host had its default gateway in mac
address. Anyone had any experience with this?.
all arp happens in table 0 so far, no need to copy.
I Also like to ask, maybe a stupid question, how to display route label
(from bgpd.conf) using netstat or route show?
route get shows the label if it is there
--
Henning Brauer, [EMAIL PROTECTED], [EMAIL PROTECTED]
BS Web Services, http://bsws.de
Full-Service ISP - Secure Hosting, Mail and DNS Services
Dedicated Servers, Rootservers, Application Hosting - Hamburg Amsterdam
