[mythtv-users] configure did not detect my cpu
*** WARNING *** Your CPU was not detected properly: uname -m: i586 uname -p: i586 model name: AMD-K6(tm) 3D+ Processor flags: fpu vme de pse tsc msr mce cx8 pge mmx syscall 3dnow k6_mtrr If you are using a recent CVS checkout, please e-mail the above to mythtv-users@mythtv.org With the subject "configure did not detect my cpu" ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] nVidia Sound vs ALSA for Myth
That is the same mother board I have. Can you tell me what versions of linux and alsa you are using? Also, can I see your alsa setup files(.asoundrc, /etc/modprobe.conf) Thanks Brent On Fri, 2005-02-25 at 07:43, Scott Elliott wrote: > On Thu, 2005-02-24 at 23:13, Brent Borghese wrote: > > I have been trying every thing to get AC3 SPDIF working, with no luck. > > All I get is 2 channel sound, no matter what I do. But, the nvidia > > audio drivers did do AC3 over SPDIF, I wish they worked better. > > > > I've been using the S/PDIF output of my Nvidia based board (a7n266-vm) > for well over a year. AC3 works fine for DVDs and videos using xine. > I'm using ALSA drivers with ALSA:digital as the device, with the > attached .asoundrc. Before using the ALSA interface for Myth, I used > ALSA with the OSS device /dev/sound/adsp to use the S/PDIF output. > > > > Scott > > __ > ___ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] nVidia Sound vs ALSA for Myth
On Thu, 2005-02-24 at 21:44, Peter Judge wrote: > On Thu, 2005-02-24 at 15:38 -0500, Tom Dombrosky wrote: > > You can use nvidia's binary driver. It's really unstable but it might > > work for you. You can download it from their website. Then you just > > set myth to use /dev/dsp. > > Has anyone tried this? (This would be useful in 0.16 for getting > MythMusic to work). I have tried to use the nVidia audio drivers on two different systems and the computers were unusable. I have been trying every thing to get AC3 SPDIF working, with no luck. All I get is 2 channel sound, no matter what I do. But, the nvidia audio drivers did do AC3 over SPDIF, I wish they worked better. Brent > Regards, > Peter > > > > __ > ___ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] AC3 audio - Dolby Digital 5.1 Surround Sound
If I do: mplayer -ao alsa:device=hw=0.2 dvd://1 I get PCM 48 sound(2 channels) And if I do mplayer -ao alsa:device=hw=0.2 -ac hwac3 dvd://1 I get no sound at all. My receive gives me a decode error. MPlayers output:(No sound) == Forced audio codec: hwac3 Opening audio decoder: [hwac3] AC3/DTS pass-through SP/DIF No accelerated IMDCT transform found hwac3: switched to AC3, 448000 bps, 48000 Hz AUDIO: 48000 Hz, 2 ch, 16 bit (0x100), ratio: 56000->192000 (448.0 kbit) Selected audio codec: [hwac3] afm:hwac3 (AC3 through SPDIF) == Checking audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/8bit... AF_pre: af format: 2 bps, 2 ch, 48000 hz, big-endian AC3 AF_pre: 48000Hz 2ch big-endian AC3 alsa-init: 1 soundcard found, using: hw:0,2 alsa: 48000 Hz/2 channels/4 bpf/65536 bytes buffer/Signed 16 bit Little Endian AO: [alsa] 48000Hz 2ch big-endian AC3 (1 bps) Building audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/8bit... [format] Sample format big-endian AC3 not yet supported Couldn't find matching filter/ao format! There is this error from MPLAYER: [format] Sample format big-endian AC3 not yet supported I have tried to add -channels 6 and if I get any sound at all it is just poping and clicking sounds. mplayer and xine just do not seem to pass-through the audio to SPDIF. Brent Output of mplayer that works(but only 2 channel digital sound): == Opening audio decoder: [liba52] AC3 decoding with liba52 Using SSE optimized IMDCT transform AC3: 5.1 (3f+2r+lfe) 48000 Hz 448.0 kbit/s Using MMX optimized resampler AUDIO: 48000 Hz, 2 ch, 16 bit (0x9), ratio: 56000->192000 (448.0 kbit) Selected audio codec: [a52] afm:liba52 (AC3-liba52) == snip == Checking audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit... AF_pre: af format: 2 bps, 2 ch, 48000 hz, little-endian 16-bit signed int AF_pre: 48000Hz 2ch little-endian 16-bit signed int alsa-init: 1 soundcard found, using: hw:0,2 alsa: 48000 Hz/2 channels/4 bpf/65536 bytes buffer/Signed 16 bit Little Endian AO: [alsa] 48000Hz 2ch little-endian 16-bit signed int (2 bps) Building audio filter chain for 48000Hz/2ch/16bit -> 48000Hz/2ch/16bit... - On Tue, 2005-02-22 at 21:55, Tj wrote: > do you have a > > "-ac=hwdts,hwac3," > > in your commandline if your are using mplayer? > > > Brent Borghese wrote: > > >Has any body got Dodby Digital to work? > > > >What I am talking about is when I watch a movie with mythvideo I want my > >computers SPDIF connector connected to my Sony receiver and have the > >Blue light come on the receiver saying I am running Dodby Digtal 3/2 > >(5.1 Surround). > > > >I have no problem getting the SPDIF output to work and my receiver, but > >it says it has a PCM 48 connection, but it is only 2 channels. > > > >I have a Asus A7N8X-E deluxe MB with 6 channel audio. I am running alsa > >1.08 and I have tested it with the MB's audio and a Sound Blaster Live > >5.1 card. Both do the same thing 2 channel digital audio. > > > >I did try to use the Nvidia OSS audio drivers and was able to get my > >receiver say it was Dodby Digtal 3/2 and the blue light came on. But, > >the drivers would make all the video run real real slow, so it made the > >audio driver unusable. > > > >I have also tried xine, the last 3 versions of MPlayer and the CVS > >version of MPlayer. They all do the same thing, 2 channel digital > >audio. > > > >Brent > > > > > > > > > > > > > > > >___ > >mythtv-users mailing list > >mythtv-users@mythtv.org > >http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > > > > > > ___ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] AC3 audio - Dolby Digital 5.1 Surround Sound
Has any body got Dodby Digital to work? What I am talking about is when I watch a movie with mythvideo I want my computers SPDIF connector connected to my Sony receiver and have the Blue light come on the receiver saying I am running Dodby Digtal 3/2 (5.1 Surround). I have no problem getting the SPDIF output to work and my receiver, but it says it has a PCM 48 connection, but it is only 2 channels. I have a Asus A7N8X-E deluxe MB with 6 channel audio. I am running alsa 1.08 and I have tested it with the MB's audio and a Sound Blaster Live 5.1 card. Both do the same thing 2 channel digital audio. I did try to use the Nvidia OSS audio drivers and was able to get my receiver say it was Dodby Digtal 3/2 and the blue light came on. But, the drivers would make all the video run real real slow, so it made the audio driver unusable. I have also tried xine, the last 3 versions of MPlayer and the CVS version of MPlayer. They all do the same thing, 2 channel digital audio. Brent ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] Time stretch
So far for the name of "Time Stretch" we have: Tempo Time Stretch Time Compression Time warp MythPace I like "Tempo" or "Video Tempo" Brent ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] Re: [mythtv] Missing features from 0.16 to 0.17
On Mon, 2005-02-21 at 00:11, henri wrote: > > 2. MythWeather does not have the animated map. > > go into the weather settings and up your connection > speed. if it's set at the slowest type of connection it will > only get the static map It does nothing. It does not work at any connection speed. Brent > henri ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] Audio problem with 0.17
After I upgraded to 0.17 one of my frontend's sound did not work with mythtv. All the shows sounded like chipmunk's talking. I changed all the audio settings and nothing seem to fix it. I was also thinking it was a gcc/configure/make/cpu problem, but I copied all the programs and library's from a working frontend, with no change. All the other programs still worked ok(mplayer/mythvideo, mythmusic, xmms) It looks like the problem is with some versions of the OSS driver and the new mythtv. The card I was using that did not work is a Sound Blaster pci 128 card. It uses the es1370 oss driver. I replace the card with a Sound Blaster Live and the frontend works fine. Brent ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
