Re: [mythtv-users] Cannot tune PVR 350 on FC3
Hello Maybe it doesn't help much, but the new version of the ivtv driver solves problems with some tuners, but from your post I can see that your card is not the one with that kind of problems. Your tuner us type 2 and that one should be reconized by any ivtv driver version. What I can advise you is to post all the information related with ivtv (module options, your region, etc) so everyone can have a look at it and try to help you. Juan Bruce McKenzie wrote: Greetings - I'm starting here, but can be persuaded to move off to the ivtv-devel list if there is no solution known (here) I've installed myth 0.16 (wow!) on FC3 with Jared's guide (wow!). I've got TVout working, IR working, life is good... Except for the ubiquitous "always get static from tuner0" even with ptune and mplayer. I've tried all the module options, and I get nuttin'. I just saw the tuning frequency stuff, so I'll try that tonight. I'm running ivtv 0.1.10 (0.1.10-48.4_pre2_ck100zz.rhfc3.at). QUESTION: Should I upgrade to 0.2.0 ? Has that solved anyone's issue with tuning problems? FOLLOWUP QUESTIONs: If so, how do I tell apt to get that version? How can I revert to 0.1.10 should I wish to? TIA, Bruce Iv messages: Dec 7 23:50:15 localhost kernel: ivtv: version 0.1.10 (0.1.10-48.4_pre2_ck100zz.rhfc3.at) loading Dec 7 23:50:15 localhost kernel: ivtv: Linux version: 2.6.9-1.681_FC3 686 REGPARM 4KSTACKS gcc-3.4 Dec 7 23:50:15 localhost kernel: ivtv: In case of problems please include the debug info Dec 7 23:50:15 localhost kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when Dec 7 23:50:15 localhost kernel: ivtv: mailing the ivtv-devel mailinglist. Dec 7 23:50:15 localhost kernel: ivtv: Autodetected WinTV PVR 350 card Dec 7 23:50:15 localhost kernel: ivtv: Found an iTVC15 based chip Dec 7 23:50:15 localhost kernel: ACPI: PCI interrupt :00:08.0[A] -> GSI 11(level, low) -> IRQ 11 Dec 7 23:50:15 localhost kernel: ivtv: Unreasonably low latency timer, settingto 64 (was 32) Dec 7 23:50:15 localhost kernel: ivtv: pci: VIA detected device: 0x3148 vendor: 0x1106 Dec 7 23:50:15 localhost kernel: tveeprom: Ignoring new-style parameters in presence of obsolete ones Dec 7 23:50:15 localhost kernel: tveeprom: Hauppauge: model = 48132, rev = I123, serial# = 2867373 Dec 7 23:50:15 localhost kernel: tveeprom: tuner = Philips FM1236 (idx = 23, type = 2) Dec 7 23:50:15 localhost kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08,v4l2 = 0x1000) Dec 7 23:50:15 localhost kernel: tveeprom: audio_processor = MSP3440 (type = 11) Dec 7 23:50:15 localhost kernel: ivtv: i2c attach [client=tveeprom[0],ok] Dec 7 23:50:15 localhost kernel: ivtv: Tuner Type 2, Tuner formats 0x1000,Radio: yes, Model 0x00a51493, Revision 0x0001 Dec 7 23:50:15 localhost kernel: ivtv: NTSC tuner detected Dec 7 23:50:15 localhost kernel: ivtv: Radio detected Dec 7 23:50:15 localhost kernel: tuner: Ignoring new-style parameters in presence of obsolete ones Dec 7 23:50:15 localhost kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 Dec 7 23:50:15 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok] Dec 7 23:50:15 localhost kernel: saa7115: Ignoring new-style parameters in presence of obsolete ones Dec 7 23:50:15 localhost kernel: saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) Dec 7 23:50:15 localhost kernel: saa7115: detecting saa7115 client on address 0x42 Dec 7 23:50:15 localhost kernel: saa7115: writing init values Dec 7 23:50:15 localhost kernel: ivtv: i2c attach [client=saa7115[0],ok] Dec 7 23:50:15 localhost kernel: saa7115: status: (1E) 0x48, (1F) 0xc0 Dec 7 23:50:15 localhost kernel: saa7127: Ignoring new-style parameters in presence of obsolete ones Dec 7 23:50:15 localhost kernel: saa7127: video encoder driver version V 0.3 loaded Dec 7 23:50:15 localhost kernel: saa7127: Selecting NTSC video Standard Dec 7 23:50:15 localhost kernel: saa7127: Selecting S-Video+Composite Dec 7 23:50:15 localhost kernel: saa7127: Turn WSS off Dec 7 23:50:15 localhost kernel: saa7127: Widescreen Mode 4:3 Full Format Dec 7 23:50:15 localhost kernel: saa7127: Selecting Normal Encoder Input Dec 7 23:50:15 localhost kernel: saa7127: Enable Video Output Dec 7 23:50:15 localhost kernel: ivtv: i2c attach [client=saa7127[0],ok] Dec 7 23:50:15 localhost kernel: msp3400: Ignoring new-style parameters in presence of obsolete ones Dec 7 23:50:16 localhost kernel: msp34xx: init: chip=MSP3448W-A2 +nicam +simple +simpler +radio mode=simpler Dec 7 23:50:16 localhost kernel: ivtv: i2c attach [client=MSP3448W-A2,ok] Dec 7 23:50:17 localhost kernel: ivtv: Encoder revision: 0x02040024 Dec 7 23:50:17 localhost kernel: ivtv: Decoder revision: 0x02020023 Dec 7 23:50:17 localhost kernel: ivtv: Configuring WinTV PVR 350 card with 9 streams Dec 7 23:50:17 localhost kernel: ivtv: Create DMA stream 0 using 128 buffers of size 32768 Dec 7 23:50:17 localhost kern
[mythtv-users] Cannot tune PVR 350 on FC3
Greetings - I'm starting here, but can be persuaded to move off to the ivtv-devel list if there is no solution known (here) I've installed myth 0.16 (wow!) on FC3 with Jared's guide (wow!). I've got TVout working, IR working, life is good... Except for the ubiquitous "always get static from tuner0" even with ptune and mplayer. I've tried all the module options, and I get nuttin'. I just saw the tuning frequency stuff, so I'll try that tonight. I'm running ivtv 0.1.10 (0.1.10-48.4_pre2_ck100zz.rhfc3.at). QUESTION: Should I upgrade to 0.2.0 ? Has that solved anyone's issue with tuning problems? FOLLOWUP QUESTIONs: If so, how do I tell apt to get that version? How can I revert to 0.1.10 should I wish to? TIA, Bruce Iv messages: Dec 7 23:50:15 localhost kernel: ivtv: version 0.1.10 (0.1.10-48.4_pre2_ck100zz.rhfc3.at) loading Dec 7 23:50:15 localhost kernel: ivtv: Linux version: 2.6.9-1.681_FC3 686 REGPARM 4KSTACKS gcc-3.4 Dec 7 23:50:15 localhost kernel: ivtv: In case of problems please include the debug info Dec 7 23:50:15 localhost kernel: ivtv: between the START INIT IVTV and END INIT IVTV lines when Dec 7 23:50:15 localhost kernel: ivtv: mailing the ivtv-devel mailinglist. Dec 7 23:50:15 localhost kernel: ivtv: Autodetected WinTV PVR 350 card Dec 7 23:50:15 localhost kernel: ivtv: Found an iTVC15 based chip Dec 7 23:50:15 localhost kernel: ACPI: PCI interrupt :00:08.0[A] -> GSI 11(level, low) -> IRQ 11 Dec 7 23:50:15 localhost kernel: ivtv: Unreasonably low latency timer, settingto 64 (was 32) Dec 7 23:50:15 localhost kernel: ivtv: pci: VIA detected device: 0x3148 vendor: 0x1106 Dec 7 23:50:15 localhost kernel: tveeprom: Ignoring new-style parameters in presence of obsolete ones Dec 7 23:50:15 localhost kernel: tveeprom: Hauppauge: model = 48132, rev = I123, serial# = 2867373 Dec 7 23:50:15 localhost kernel: tveeprom: tuner = Philips FM1236 (idx = 23, type = 2) Dec 7 23:50:15 localhost kernel: tveeprom: tuner fmt = NTSC(M) (eeprom = 0x08,v4l2 = 0x1000) Dec 7 23:50:15 localhost kernel: tveeprom: audio_processor = MSP3440 (type = 11) Dec 7 23:50:15 localhost kernel: ivtv: i2c attach [client=tveeprom[0],ok] Dec 7 23:50:15 localhost kernel: ivtv: Tuner Type 2, Tuner formats 0x1000,Radio: yes, Model 0x00a51493, Revision 0x0001 Dec 7 23:50:15 localhost kernel: ivtv: NTSC tuner detected Dec 7 23:50:15 localhost kernel: ivtv: Radio detected Dec 7 23:50:15 localhost kernel: tuner: Ignoring new-style parameters in presence of obsolete ones Dec 7 23:50:15 localhost kernel: tuner: chip found at addr 0xc2 i2c-bus ivtv i2c driver #0 Dec 7 23:50:15 localhost kernel: ivtv: i2c attach [client=(tuner unset),ok] Dec 7 23:50:15 localhost kernel: saa7115: Ignoring new-style parameters in presence of obsolete ones Dec 7 23:50:15 localhost kernel: saa7115: starting probe for adapter ivtv i2c driver #0 (0x10005) Dec 7 23:50:15 localhost kernel: saa7115: detecting saa7115 client on address 0x42 Dec 7 23:50:15 localhost kernel: saa7115: writing init values Dec 7 23:50:15 localhost kernel: ivtv: i2c attach [client=saa7115[0],ok] Dec 7 23:50:15 localhost kernel: saa7115: status: (1E) 0x48, (1F) 0xc0 Dec 7 23:50:15 localhost kernel: saa7127: Ignoring new-style parameters in presence of obsolete ones Dec 7 23:50:15 localhost kernel: saa7127: video encoder driver version V 0.3 loaded Dec 7 23:50:15 localhost kernel: saa7127: Selecting NTSC video Standard Dec 7 23:50:15 localhost kernel: saa7127: Selecting S-Video+Composite Dec 7 23:50:15 localhost kernel: saa7127: Turn WSS off Dec 7 23:50:15 localhost kernel: saa7127: Widescreen Mode 4:3 Full Format Dec 7 23:50:15 localhost kernel: saa7127: Selecting Normal Encoder Input Dec 7 23:50:15 localhost kernel: saa7127: Enable Video Output Dec 7 23:50:15 localhost kernel: ivtv: i2c attach [client=saa7127[0],ok] Dec 7 23:50:15 localhost kernel: msp3400: Ignoring new-style parameters in presence of obsolete ones Dec 7 23:50:16 localhost kernel: msp34xx: init: chip=MSP3448W-A2 +nicam +simple +simpler +radio mode=simpler Dec 7 23:50:16 localhost kernel: ivtv: i2c attach [client=MSP3448W-A2,ok] Dec 7 23:50:17 localhost kernel: ivtv: Encoder revision: 0x02040024 Dec 7 23:50:17 localhost kernel: ivtv: Decoder revision: 0x02020023 Dec 7 23:50:17 localhost kernel: ivtv: Configuring WinTV PVR 350 card with 9 streams Dec 7 23:50:17 localhost kernel: ivtv: Create DMA stream 0 using 128 buffers of size 32768 Dec 7 23:50:17 localhost kernel: ivtv: Create DMA stream 1 using 128 buffers of size 32768 Dec 7 23:50:17 localhost kernel: ivtv: Create stream 2 using 128 buffers of size 52224 Dec 7 23:50:17 localhost kernel: ivtv: Create DMA stream 3 using 128 buffers of size 32768 Dec 7 23:50:17 localhost kernel: ivtv: Create stream 4 Dec 7 23:50:17 localhost kernel: ivtv: Create DMA stream 5 using 16 buffers ofsize 32768 Dec 7 23:50:17 localhost kernel: ivtv: Create stream 6 using 128 buffers of size
