Re: [mythtv-users] Problems running Myth - segfault starting liveTV
I ended up blowing away that system and switching to the FC4 build, as FC4 just came out as I was having that problem).I did not have any issues with FC4, AND there were options that were not available to me when I used Gentoo. I would assume that the build of MythTV installed by gentoo is not the same as the one installed by apt / yum via Jerod's guide. At least, it was not as of Aug 05. On 12/28/05, Jeff Simpson [EMAIL PROTECTED] wrote: On 8/23/05, Blastzone [EMAIL PROTECTED] wrote: Ok, next step was to build the proprietary ATI driver and see if thathelped.Nope.So I'm running the fglrx driver instead of the radeon driver in X, butno joy, still segfaulting.I did manage to figure out the security lockdown in gentoo's X (go into the /usr/X11R6/bin/startx script and pull the --nolisten tcp flag)and get some GDB output.What I got was all the same log messages(see above) but also this line after the segfault:#0 0xb65b6dbc in nanosleep() from /lib/libc.so.6 I hope that helps - it's frustrating being so close, and so far.Is there at least a hack that I can use in the interim to point watchrecordings to mplayer instead of the internal player?trying to find shows by 1066_MMDDhhmm_etc.is not easy.If it helps any, I am having the EXACT same problem with my setup (gentoo, brand new install, Radeon Mobility 7500. myth worked fine with the normal ati drivers, crashes with a segfault with the radeon DRI OpenGL drivers. I have the nvidia use flag turned off. is myth hardcoded to use nvidia for some reason? Logically, it should not be trying to open /dev/nvidia0 at ALL if I have nvidia turned off. - Jeff ___mythtv-users mailing listmythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] Problems running Myth - segfault starting liveTV
On 8/23/05, Blastzone [EMAIL PROTECTED] wrote: Ok, next step was to build the proprietary ATI driver and see if thathelped.Nope.So I'm running the fglrx driver instead of the radeon driver in X, butno joy, still segfaulting.I did manage to figure out the security lockdown in gentoo's X (go into the /usr/X11R6/bin/startx script and pull the --nolisten tcp flag)and get some GDB output.What I got was all the same log messages(see above) but also this line after the segfault:#0 0xb65b6dbc in nanosleep() from /lib/libc.so.6 I hope that helps - it's frustrating being so close, and so far.Is there at least a hack that I can use in the interim to point watchrecordings to mplayer instead of the internal player?trying to find shows by 1066_MMDDhhmm_etc.is not easy.If it helps any, I am having the EXACT same problem with my setup (gentoo, brand new install, Radeon Mobility 7500. myth worked fine with the normal ati drivers, crashes with a segfault with the radeon DRI OpenGL drivers. I have the nvidia use flag turned off. is myth hardcoded to use nvidia for some reason? Logically, it should not be trying to open /dev/nvidia0 at ALL if I have nvidia turned off. - Jeff ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] Problems running Myth - segfault starting liveTV
Ok, next step was to build the proprietary ATI driver and see if that helped. Nope. So I'm running the fglrx driver instead of the radeon driver in X, but no joy, still segfaulting. I did manage to figure out the security lockdown in gentoo's X (go into the /usr/X11R6/bin/startx script and pull the --nolisten tcp flag) and get some GDB output. What I got was all the same log messages (see above) but also this line after the segfault: #0 0xb65b6dbc in nanosleep () from /lib/libc.so.6 I hope that helps - it's frustrating being so close, and so far. Is there at least a hack that I can use in the interim to point watch recordings to mplayer instead of the internal player? trying to find shows by 1066_MMDDhhmm_etc. is not easy. On 8/21/05, Blastzone [EMAIL PROTECTED] wrote: Nope. unmerged myth Manually removed all myth-related files Removed the database ran revdep-rebuild re-emerged myth same problem. I'll continue to work on a real GDB output tomorrow evening, but if anyone has some ideas as to what is causing the segfault, I'd really appreciate it. On 8/21/05, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: I've had the same problem a while ago. My solution was unmerging the myth-ebuilds, manually removing every file with *myth* in it's name from the harddisk (certainly not the files in /usr/portage ... ), then did a revdep-rebuild to be sure the system is ok and afterwards remerged the myth ebuilds. I guess my problem was a left over from a previous install from source code. Maybe this helps Regards Fritz -Ursprüngliche Nachricht- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Auftrag von Blastzone Gesendet: Sonntag, 21. August 2005 02:17 An: Discussion about mythtv Betreff: Re: [mythtv-users] Problems running Myth - segfault starting liveTV I'm not real worried about the modprobing.. that's easily fixed with a script. I re-emerged with the -opengl and -nvidia flags in the USE line, but still no joy. Here's the output from mythfrontend -v all: (fyi - floyd is the machine name) 2005-08-20 20:00:56.780 New DB connection, total: 1 Total desktop width=1024, height=768, numscreens=1 2005-08-20 20:00:56.785 Using screen 0, 1024x768 at 0,0 2005-08-20 20:00:56.789 mythfrontend version: 0.18.1.20050510-1 www.mythtv.org 2005-08-20 20:00:56.790 Enabled verbose msgs :all 2005-08-20 20:00:56.854 max_width: 1024 max_height: 768 2005-08-20 20:00:56.921 Switching to square mode (G.A.N.T.) 2005-08-20 20:00:57.249 Registering Internal as a media playback plugin. 2005-08-20 20:00:57.260 Registering MythDVD DVD Media Handler as a media handler 2005-08-20 20:00:57.260 Registering MythDVD VCD Media Handler as a media handler 2005-08-20 20:00:57.391 Registering MythMusic Media Handler as a media handler 2005-08-20 20:01:02.492 New DB connection, total: 2 2005-08-20 20:01:02.509 Connecting to backend server: 127.0.0.1:6543 (try 1 of 5) 2005-08-20 20:01:02.510 write-12 21 MYTH_PROTO_VERSION 15: 2005-08-20 20:01:02.517 Using protocol version 15 2005-08-20 20:01:02.517 write-12 20 ANN Playback floyd 0: 2005-08-20 20:01:02.531 write-12 29 GET_NEXT_FREE_RECORDER[]:[]-1: 2005-08-20 20:01:02.539 20 ANN Playback floyd 1 2005-08-20 20:01:02.540 write-14 21 MYTH_PROTO_VERSION 15: 2005-08-20 20:01:02.550 Using protocol version 15 2005-08-20 20:01:02.550 write-14 20 ANN Playback floyd 0: 2005-08-20 20:01:02.555 write-14 44 QUERY_RECORDER 1[]:[]SETUP_RING_BUFFE... 2005-08-20 20:01:02.563 write-15 20 ANN Playback floyd 0: 2005-08-20 20:01:02.570 write-16 22 ANN RingBuffer floyd 1: 2005-08-20 20:01:02.577 write-14 33 QUERY_RECORDER 1[]:[]SPAWN_LIVETV: 2005-08-20 20:01:02.649 write-14 37 QUERY_RECORDER 1[]:[]GET_PROGRAM_INFO: 2005-08-20 20:01:02.660 Output filters for this channel are: '' 2005-08-20 20:01:02.661 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:03.661 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:03.661 write-15 66 QUERY_RECORDER 1[]:[]SEEK_RINGBUF[]:[... 2005-08-20 20:01:03.668 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:03.675 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:03.676 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:03.930 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:03.931 write-15 73 QUERY_RECORDER 1[]:[]SEEK_RINGBUF[]:[... 2005-08-20 20:01:03.937 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:03.943 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:03.945 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:04.237 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:04.238 write-15 73
AW: [mythtv-users] Problems running Myth - segfault starting liveTV
I've had the same problem a while ago. My solution was unmerging the myth-ebuilds, manually removing every file with *myth* in it's name from the harddisk (certainly not the files in /usr/portage ... ), then did a revdep-rebuild to be sure the system is ok and afterwards remerged the myth ebuilds. I guess my problem was a left over from a previous install from source code. Maybe this helps Regards Fritz -Ursprüngliche Nachricht- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Auftrag von Blastzone Gesendet: Sonntag, 21. August 2005 02:17 An: Discussion about mythtv Betreff: Re: [mythtv-users] Problems running Myth - segfault starting liveTV I'm not real worried about the modprobing.. that's easily fixed with a script. I re-emerged with the -opengl and -nvidia flags in the USE line, but still no joy. Here's the output from mythfrontend -v all: (fyi - floyd is the machine name) 2005-08-20 20:00:56.780 New DB connection, total: 1 Total desktop width=1024, height=768, numscreens=1 2005-08-20 20:00:56.785 Using screen 0, 1024x768 at 0,0 2005-08-20 20:00:56.789 mythfrontend version: 0.18.1.20050510-1 www.mythtv.org 2005-08-20 20:00:56.790 Enabled verbose msgs :all 2005-08-20 20:00:56.854 max_width: 1024 max_height: 768 2005-08-20 20:00:56.921 Switching to square mode (G.A.N.T.) 2005-08-20 20:00:57.249 Registering Internal as a media playback plugin. 2005-08-20 20:00:57.260 Registering MythDVD DVD Media Handler as a media handler 2005-08-20 20:00:57.260 Registering MythDVD VCD Media Handler as a media handler 2005-08-20 20:00:57.391 Registering MythMusic Media Handler as a media handler 2005-08-20 20:01:02.492 New DB connection, total: 2 2005-08-20 20:01:02.509 Connecting to backend server: 127.0.0.1:6543 (try 1 of 5) 2005-08-20 20:01:02.510 write-12 21 MYTH_PROTO_VERSION 15: 2005-08-20 20:01:02.517 Using protocol version 15 2005-08-20 20:01:02.517 write-12 20 ANN Playback floyd 0: 2005-08-20 20:01:02.531 write-12 29 GET_NEXT_FREE_RECORDER[]:[]-1: 2005-08-20 20:01:02.539 20 ANN Playback floyd 1 2005-08-20 20:01:02.540 write-14 21 MYTH_PROTO_VERSION 15: 2005-08-20 20:01:02.550 Using protocol version 15 2005-08-20 20:01:02.550 write-14 20 ANN Playback floyd 0: 2005-08-20 20:01:02.555 write-14 44 QUERY_RECORDER 1[]:[]SETUP_RING_BUFFE... 2005-08-20 20:01:02.563 write-15 20 ANN Playback floyd 0: 2005-08-20 20:01:02.570 write-16 22 ANN RingBuffer floyd 1: 2005-08-20 20:01:02.577 write-14 33 QUERY_RECORDER 1[]:[]SPAWN_LIVETV: 2005-08-20 20:01:02.649 write-14 37 QUERY_RECORDER 1[]:[]GET_PROGRAM_INFO: 2005-08-20 20:01:02.660 Output filters for this channel are: '' 2005-08-20 20:01:02.661 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:03.661 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:03.661 write-15 66 QUERY_RECORDER 1[]:[]SEEK_RINGBUF[]:[... 2005-08-20 20:01:03.668 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:03.675 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:03.676 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:03.930 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:03.931 write-15 73 QUERY_RECORDER 1[]:[]SEEK_RINGBUF[]:[... 2005-08-20 20:01:03.937 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:03.943 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:03.945 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:04.237 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:04.238 write-15 73 QUERY_RECORDER 1[]:[]SEEK_RINGBUF[]:[... 2005-08-20 20:01:04.245 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:04.251 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:04.252 write-15 73 QUERY_RECORDER 1[]:[]SEEK_RINGBUF[]:[... 2005-08-20 20:01:04.259 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:04.340 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:04.342 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:04.517 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:04.518 AVFD 2005-08-20 20:01:04.518 AVFD: Opening Stream #0: codec id 2 2005-08-20 20:01:04.518 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:04.519 Using libmpeg2 for video decoding 2005-08-20 20:01:04.520 detectInterlace(Detect Scan, Detect Scan, 29.97, 480) -Interlaced Scan 2005-08-20 20:01:04.520 Interlaced: Interlaced Scan video_height: 480 fps: 29.97 2005-08-20 20:01:04.520 AVFD: Looking for decoder for 2 2005-08-20 20:01:04.520 AVFD 2005-08-20 20:01:04.520 AVFD: Opening Stream #1: codec id 86016 2005-08-20 20:01:04.520 AVFD: Looking for decoder for 86016 2005-08-20 20:01:04.523 Stream #1 (audio track #0) is an audio stream with 2 channels. 2005-08
Re: [mythtv-users] Problems running Myth - segfault starting liveTV
Nope. unmerged myth Manually removed all myth-related files Removed the database ran revdep-rebuild re-emerged myth same problem. I'll continue to work on a real GDB output tomorrow evening, but if anyone has some ideas as to what is causing the segfault, I'd really appreciate it. On 8/21/05, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: I've had the same problem a while ago. My solution was unmerging the myth-ebuilds, manually removing every file with *myth* in it's name from the harddisk (certainly not the files in /usr/portage ... ), then did a revdep-rebuild to be sure the system is ok and afterwards remerged the myth ebuilds. I guess my problem was a left over from a previous install from source code. Maybe this helps Regards Fritz -Ursprüngliche Nachricht- Von: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Auftrag von Blastzone Gesendet: Sonntag, 21. August 2005 02:17 An: Discussion about mythtv Betreff: Re: [mythtv-users] Problems running Myth - segfault starting liveTV I'm not real worried about the modprobing.. that's easily fixed with a script. I re-emerged with the -opengl and -nvidia flags in the USE line, but still no joy. Here's the output from mythfrontend -v all: (fyi - floyd is the machine name) 2005-08-20 20:00:56.780 New DB connection, total: 1 Total desktop width=1024, height=768, numscreens=1 2005-08-20 20:00:56.785 Using screen 0, 1024x768 at 0,0 2005-08-20 20:00:56.789 mythfrontend version: 0.18.1.20050510-1 www.mythtv.org 2005-08-20 20:00:56.790 Enabled verbose msgs :all 2005-08-20 20:00:56.854 max_width: 1024 max_height: 768 2005-08-20 20:00:56.921 Switching to square mode (G.A.N.T.) 2005-08-20 20:00:57.249 Registering Internal as a media playback plugin. 2005-08-20 20:00:57.260 Registering MythDVD DVD Media Handler as a media handler 2005-08-20 20:00:57.260 Registering MythDVD VCD Media Handler as a media handler 2005-08-20 20:00:57.391 Registering MythMusic Media Handler as a media handler 2005-08-20 20:01:02.492 New DB connection, total: 2 2005-08-20 20:01:02.509 Connecting to backend server: 127.0.0.1:6543 (try 1 of 5) 2005-08-20 20:01:02.510 write-12 21 MYTH_PROTO_VERSION 15: 2005-08-20 20:01:02.517 Using protocol version 15 2005-08-20 20:01:02.517 write-12 20 ANN Playback floyd 0: 2005-08-20 20:01:02.531 write-12 29 GET_NEXT_FREE_RECORDER[]:[]-1: 2005-08-20 20:01:02.539 20 ANN Playback floyd 1 2005-08-20 20:01:02.540 write-14 21 MYTH_PROTO_VERSION 15: 2005-08-20 20:01:02.550 Using protocol version 15 2005-08-20 20:01:02.550 write-14 20 ANN Playback floyd 0: 2005-08-20 20:01:02.555 write-14 44 QUERY_RECORDER 1[]:[]SETUP_RING_BUFFE... 2005-08-20 20:01:02.563 write-15 20 ANN Playback floyd 0: 2005-08-20 20:01:02.570 write-16 22 ANN RingBuffer floyd 1: 2005-08-20 20:01:02.577 write-14 33 QUERY_RECORDER 1[]:[]SPAWN_LIVETV: 2005-08-20 20:01:02.649 write-14 37 QUERY_RECORDER 1[]:[]GET_PROGRAM_INFO: 2005-08-20 20:01:02.660 Output filters for this channel are: '' 2005-08-20 20:01:02.661 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:03.661 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:03.661 write-15 66 QUERY_RECORDER 1[]:[]SEEK_RINGBUF[]:[... 2005-08-20 20:01:03.668 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:03.675 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:03.676 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:03.930 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:03.931 write-15 73 QUERY_RECORDER 1[]:[]SEEK_RINGBUF[]:[... 2005-08-20 20:01:03.937 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:03.943 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:03.945 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:04.237 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:04.238 write-15 73 QUERY_RECORDER 1[]:[]SEEK_RINGBUF[]:[... 2005-08-20 20:01:04.245 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:04.251 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:04.252 write-15 73 QUERY_RECORDER 1[]:[]SEEK_RINGBUF[]:[... 2005-08-20 20:01:04.259 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:04.340 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:04.342 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:04.517 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:04.518 AVFD 2005-08-20 20:01:04.518 AVFD: Opening Stream #0: codec id 2 2005-08-20 20:01:04.518 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:04.519 Using libmpeg2 for video decoding 2005-08-20 20:01:04.520
[mythtv-users] Problems running Myth - segfault starting liveTV
I've been working on a MythTV box for a few months now, and it's been one trouble after another. Word of caution: Pundit-R's don't seem to like SATA HDD and PATA DVD drives together. I've put in a Hauppauge PVR-250 and a 160GB PATA drive along with the DVD-RW drive. The system is running Gentoo 2005.1 So far, so good, I can watch DVDs through mplayer I installed the Hauppauge card, and had problems getting it to tune. Seems that the tuner module does not load with the correct tuner parameter. On boot I have to manually unload that module with an rmmod, and reload it with a modprobe tuner type=39. Then the card will tune to NSTC cable (using mplayer ptune-ui to test) Started up Myth for the first time. Backend runs OK, frontend starts OK. Try to choose Live TV, and the screen goes black for about 5 sec, then returns to X (using evilWM) with a segmentation fault error. No other information is provided. I've rebuilt Myth from source, and build using the --debug option, but I can't seem to get mythfrontend to start from a virtual console and display on the local X. it tells me no X server is available (yes, X is running, and the DISPLAY variable is set). Running mythfrontend in gdb locally ends up locking the display when it segfaults. Ctl-C, etc does not get me back to the console to view the GDB output (only solution is killing the X server). So, I turned on verbose logging. Just before it segfaults, the logfile shows myth looking for /dev/nvidia0 Which doesn't exist on my pundit's ATI board. Following this recent thread: http://www.gossamer-threads.com/lists/mythtv/users/144660 has not proved helpful as the instructions to disable XvMC (settings - next - next, etc). don't jive with myth 0.18.1 The .configure output when building myth shows no XvMC and no OpenGL support, so, wtf? Bottom line: Why is myth looking for /dev/nvidia0 when it shouldn't be?, how do I stop that?, and why will there be no broadcast HDTV in my area until fall 2006? Thanks for anyone's help. I can't imagine that pundit-R + pvr250 + gentoo is a strange combination, so odds are SOMEONE has fought with this before. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
RE: [mythtv-users] Problems running Myth - segfault starting liveTV
Put -nvidia in your USE Flags in /etc/make.conf and emerge mythtv again. This will remove the NVidia support and presumably allow you to start. David -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blastzone Sent: Saturday, August 20, 2005 10:38 AM To: mythtv-users@mythtv.org Subject: [mythtv-users] Problems running Myth - segfault starting liveTV I've been working on a MythTV box for a few months now, and it's been one trouble after another. Word of caution: Pundit-R's don't seem to like SATA HDD and PATA DVD drives together. I've put in a Hauppauge PVR-250 and a 160GB PATA drive along with the DVD-RW drive. The system is running Gentoo 2005.1 So far, so good, I can watch DVDs through mplayer I installed the Hauppauge card, and had problems getting it to tune. Seems that the tuner module does not load with the correct tuner parameter. On boot I have to manually unload that module with an rmmod, and reload it with a modprobe tuner type=39. Then the card will tune to NSTC cable (using mplayer ptune-ui to test) Started up Myth for the first time. Backend runs OK, frontend starts OK. Try to choose Live TV, and the screen goes black for about 5 sec, then returns to X (using evilWM) with a segmentation fault error. No other information is provided. I've rebuilt Myth from source, and build using the --debug option, but I can't seem to get mythfrontend to start from a virtual console and display on the local X. it tells me no X server is available (yes, X is running, and the DISPLAY variable is set). Running mythfrontend in gdb locally ends up locking the display when it segfaults. Ctl-C, etc does not get me back to the console to view the GDB output (only solution is killing the X server). So, I turned on verbose logging. Just before it segfaults, the logfile shows myth looking for /dev/nvidia0 Which doesn't exist on my pundit's ATI board. Following this recent thread: http://www.gossamer-threads.com/lists/mythtv/users/144660 has not proved helpful as the instructions to disable XvMC (settings - next - next, etc). don't jive with myth 0.18.1 The .configure output when building myth shows no XvMC and no OpenGL support, so, wtf? Bottom line: Why is myth looking for /dev/nvidia0 when it shouldn't be?, how do I stop that?, and why will there be no broadcast HDTV in my area until fall 2006? Thanks for anyone's help. I can't imagine that pundit-R + pvr250 + gentoo is a strange combination, so odds are SOMEONE has fought with this before. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] Problems running Myth - segfault starting liveTV
No joy. Still the same problem. running mythfrontend with the -v all flag returns a log file ending with nVidiaVideoSync: Could not open device /dev/nvidia0; no such file or directory On 8/20/05, David Ellis [EMAIL PROTECTED] wrote: Put -nvidia in your USE Flags in /etc/make.conf and emerge mythtv again. This will remove the NVidia support and presumably allow you to start. David -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blastzone Sent: Saturday, August 20, 2005 10:38 AM To: mythtv-users@mythtv.org Subject: [mythtv-users] Problems running Myth - segfault starting liveTV I've been working on a MythTV box for a few months now, and it's been one trouble after another. Word of caution: Pundit-R's don't seem to like SATA HDD and PATA DVD drives together. I've put in a Hauppauge PVR-250 and a 160GB PATA drive along with the DVD-RW drive. The system is running Gentoo 2005.1 So far, so good, I can watch DVDs through mplayer I installed the Hauppauge card, and had problems getting it to tune. Seems that the tuner module does not load with the correct tuner parameter. On boot I have to manually unload that module with an rmmod, and reload it with a modprobe tuner type=39. Then the card will tune to NSTC cable (using mplayer ptune-ui to test) Started up Myth for the first time. Backend runs OK, frontend starts OK. Try to choose Live TV, and the screen goes black for about 5 sec, then returns to X (using evilWM) with a segmentation fault error. No other information is provided. I've rebuilt Myth from source, and build using the --debug option, but I can't seem to get mythfrontend to start from a virtual console and display on the local X. it tells me no X server is available (yes, X is running, and the DISPLAY variable is set). Running mythfrontend in gdb locally ends up locking the display when it segfaults. Ctl-C, etc does not get me back to the console to view the GDB output (only solution is killing the X server). So, I turned on verbose logging. Just before it segfaults, the logfile shows myth looking for /dev/nvidia0 Which doesn't exist on my pundit's ATI board. Following this recent thread: http://www.gossamer-threads.com/lists/mythtv/users/144660 has not proved helpful as the instructions to disable XvMC (settings - next - next, etc). don't jive with myth 0.18.1 The .configure output when building myth shows no XvMC and no OpenGL support, so, wtf? Bottom line: Why is myth looking for /dev/nvidia0 when it shouldn't be?, how do I stop that?, and why will there be no broadcast HDTV in my area until fall 2006? Thanks for anyone's help. I can't imagine that pundit-R + pvr250 + gentoo is a strange combination, so odds are SOMEONE has fought with this before. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
RE: [mythtv-users] Problems running Myth - segfault starting liveTV
Whoops one more: add -opengl to your use flags - and re-emerge. David -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blastzone Sent: Saturday, August 20, 2005 5:37 PM To: Discussion about mythtv Subject: Re: [mythtv-users] Problems running Myth - segfault starting liveTV No joy. Still the same problem. running mythfrontend with the -v all flag returns a log file ending with nVidiaVideoSync: Could not open device /dev/nvidia0; no such file or directory On 8/20/05, David Ellis [EMAIL PROTECTED] wrote: Put -nvidia in your USE Flags in /etc/make.conf and emerge mythtv again. This will remove the NVidia support and presumably allow you to start. David -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blastzone Sent: Saturday, August 20, 2005 10:38 AM To: mythtv-users@mythtv.org Subject: [mythtv-users] Problems running Myth - segfault starting liveTV I've been working on a MythTV box for a few months now, and it's been one trouble after another. Word of caution: Pundit-R's don't seem to like SATA HDD and PATA DVD drives together. I've put in a Hauppauge PVR-250 and a 160GB PATA drive along with the DVD-RW drive. The system is running Gentoo 2005.1 So far, so good, I can watch DVDs through mplayer I installed the Hauppauge card, and had problems getting it to tune. Seems that the tuner module does not load with the correct tuner parameter. On boot I have to manually unload that module with an rmmod, and reload it with a modprobe tuner type=39. Then the card will tune to NSTC cable (using mplayer ptune-ui to test) Started up Myth for the first time. Backend runs OK, frontend starts OK. Try to choose Live TV, and the screen goes black for about 5 sec, then returns to X (using evilWM) with a segmentation fault error. No other information is provided. I've rebuilt Myth from source, and build using the --debug option, but I can't seem to get mythfrontend to start from a virtual console and display on the local X. it tells me no X server is available (yes, X is running, and the DISPLAY variable is set). Running mythfrontend in gdb locally ends up locking the display when it segfaults. Ctl-C, etc does not get me back to the console to view the GDB output (only solution is killing the X server). So, I turned on verbose logging. Just before it segfaults, the logfile shows myth looking for /dev/nvidia0 Which doesn't exist on my pundit's ATI board. Following this recent thread: http://www.gossamer-threads.com/lists/mythtv/users/144660 has not proved helpful as the instructions to disable XvMC (settings - next - next, etc). don't jive with myth 0.18.1 The .configure output when building myth shows no XvMC and no OpenGL support, so, wtf? Bottom line: Why is myth looking for /dev/nvidia0 when it shouldn't be?, how do I stop that?, and why will there be no broadcast HDTV in my area until fall 2006? Thanks for anyone's help. I can't imagine that pundit-R + pvr250 + gentoo is a strange combination, so odds are SOMEONE has fought with this before. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] Problems running Myth - segfault starting liveTV
This won't help with your missing file problem. But you could have linux reload the tuner on bootup. In redhat you can edit rc.local and do the rmmod and modprobe the tuner with whatever you need. I had to do this for my pvr350 card upon bootup. Except I just modprobed the ivtv module. I also had to restart mythbackend for some reason. I don't know why. Hopefully, this helps you solve one problem. Thomas Blastzone wrote: No joy. Still the same problem. running mythfrontend with the -v all flag returns a log file ending with nVidiaVideoSync: Could not open device /dev/nvidia0; no such file or directory On 8/20/05, David Ellis [EMAIL PROTECTED] wrote: Put -nvidia in your USE Flags in /etc/make.conf and emerge mythtv again. This will remove the NVidia support and presumably allow you to start. David -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Blastzone Sent: Saturday, August 20, 2005 10:38 AM To: mythtv-users@mythtv.org Subject: [mythtv-users] Problems running Myth - segfault starting liveTV I've been working on a MythTV box for a few months now, and it's been one trouble after another. Word of caution: Pundit-R's don't seem to like SATA HDD and PATA DVD drives together. I've put in a Hauppauge PVR-250 and a 160GB PATA drive along with the DVD-RW drive. The system is running Gentoo 2005.1 So far, so good, I can watch DVDs through mplayer I installed the Hauppauge card, and had problems getting it to tune. Seems that the tuner module does not load with the correct tuner parameter. On boot I have to manually unload that module with an rmmod, and reload it with a modprobe tuner type=39. Then the card will tune to NSTC cable (using mplayer ptune-ui to test) Started up Myth for the first time. Backend runs OK, frontend starts OK. Try to choose Live TV, and the screen goes black for about 5 sec, then returns to X (using evilWM) with a segmentation fault error. No other information is provided. I've rebuilt Myth from source, and build using the --debug option, but I can't seem to get mythfrontend to start from a virtual console and display on the local X. it tells me no X server is available (yes, X is running, and the DISPLAY variable is set). Running mythfrontend in gdb locally ends up locking the display when it segfaults. Ctl-C, etc does not get me back to the console to view the GDB output (only solution is killing the X server). So, I turned on verbose logging. Just before it segfaults, the logfile shows myth looking for /dev/nvidia0 Which doesn't exist on my pundit's ATI board. Following this recent thread: http://www.gossamer-threads.com/lists/mythtv/users/144660 has not proved helpful as the instructions to disable XvMC (settings - next - next, etc). don't jive with myth 0.18.1 The .configure output when building myth shows no XvMC and no OpenGL support, so, wtf? Bottom line: Why is myth looking for /dev/nvidia0 when it shouldn't be?, how do I stop that?, and why will there be no broadcast HDTV in my area until fall 2006? Thanks for anyone's help. I can't imagine that pundit-R + pvr250 + gentoo is a strange combination, so odds are SOMEONE has fought with this before. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] Problems running Myth - segfault starting liveTV
I'm not real worried about the modprobing.. that's easily fixed with a script. I re-emerged with the -opengl and -nvidia flags in the USE line, but still no joy. Here's the output from mythfrontend -v all: (fyi - floyd is the machine name) 2005-08-20 20:00:56.780 New DB connection, total: 1 Total desktop width=1024, height=768, numscreens=1 2005-08-20 20:00:56.785 Using screen 0, 1024x768 at 0,0 2005-08-20 20:00:56.789 mythfrontend version: 0.18.1.20050510-1 www.mythtv.org 2005-08-20 20:00:56.790 Enabled verbose msgs :all 2005-08-20 20:00:56.854 max_width: 1024 max_height: 768 2005-08-20 20:00:56.921 Switching to square mode (G.A.N.T.) 2005-08-20 20:00:57.249 Registering Internal as a media playback plugin. 2005-08-20 20:00:57.260 Registering MythDVD DVD Media Handler as a media handler 2005-08-20 20:00:57.260 Registering MythDVD VCD Media Handler as a media handler 2005-08-20 20:00:57.391 Registering MythMusic Media Handler as a media handler 2005-08-20 20:01:02.492 New DB connection, total: 2 2005-08-20 20:01:02.509 Connecting to backend server: 127.0.0.1:6543 (try 1 of 5) 2005-08-20 20:01:02.510 write-12 21 MYTH_PROTO_VERSION 15: 2005-08-20 20:01:02.517 Using protocol version 15 2005-08-20 20:01:02.517 write-12 20 ANN Playback floyd 0: 2005-08-20 20:01:02.531 write-12 29 GET_NEXT_FREE_RECORDER[]:[]-1: 2005-08-20 20:01:02.539 20 ANN Playback floyd 1 2005-08-20 20:01:02.540 write-14 21 MYTH_PROTO_VERSION 15: 2005-08-20 20:01:02.550 Using protocol version 15 2005-08-20 20:01:02.550 write-14 20 ANN Playback floyd 0: 2005-08-20 20:01:02.555 write-14 44 QUERY_RECORDER 1[]:[]SETUP_RING_BUFFE... 2005-08-20 20:01:02.563 write-15 20 ANN Playback floyd 0: 2005-08-20 20:01:02.570 write-16 22 ANN RingBuffer floyd 1: 2005-08-20 20:01:02.577 write-14 33 QUERY_RECORDER 1[]:[]SPAWN_LIVETV: 2005-08-20 20:01:02.649 write-14 37 QUERY_RECORDER 1[]:[]GET_PROGRAM_INFO: 2005-08-20 20:01:02.660 Output filters for this channel are: '' 2005-08-20 20:01:02.661 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:03.661 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:03.661 write-15 66 QUERY_RECORDER 1[]:[]SEEK_RINGBUF[]:[... 2005-08-20 20:01:03.668 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:03.675 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:03.676 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:03.930 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:03.931 write-15 73 QUERY_RECORDER 1[]:[]SEEK_RINGBUF[]:[... 2005-08-20 20:01:03.937 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:03.943 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:03.945 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:04.237 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:04.238 write-15 73 QUERY_RECORDER 1[]:[]SEEK_RINGBUF[]:[... 2005-08-20 20:01:04.245 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:04.251 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:04.252 write-15 73 QUERY_RECORDER 1[]:[]SEEK_RINGBUF[]:[... 2005-08-20 20:01:04.259 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:04.340 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:04.342 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:04.517 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:04.518 AVFD 2005-08-20 20:01:04.518 AVFD: Opening Stream #0: codec id 2 2005-08-20 20:01:04.518 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:04.519 Using libmpeg2 for video decoding 2005-08-20 20:01:04.520 detectInterlace(Detect Scan, Detect Scan, 29.97, 480) -Interlaced Scan 2005-08-20 20:01:04.520 Interlaced: Interlaced Scan video_height: 480 fps: 29.97 2005-08-20 20:01:04.520 AVFD: Looking for decoder for 2 2005-08-20 20:01:04.520 AVFD 2005-08-20 20:01:04.520 AVFD: Opening Stream #1: codec id 86016 2005-08-20 20:01:04.520 AVFD: Looking for decoder for 86016 2005-08-20 20:01:04.523 Stream #1 (audio track #0) is an audio stream with 2 channels. 2005-08-20 20:01:04.523 Auto-selecting audio track #1 (stream #1). 2005-08-20 20:01:04.523 It has 2 channels and we needed at least 1 2005-08-20 20:01:04.523 Initializing audio parms from audio track #0. 2005-08-20 20:01:04.739 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:04.740 Estimated bitrate = 6384 2005-08-20 20:01:04.740 write-14 39 QUERY_RECORDER 1[]:[]GET_FRAMES_WRITTEN: 2005-08-20 20:01:04.741 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:04.746 Filling position map from 0 to 41 2005-08-20 20:01:04.746 write-14 51 QUERY_RECORDER 1[]:[]FILL_POSITION_MA... 2005-08-20 20:01:04.756 Position map
Re: [mythtv-users] Problems running Myth - segfault starting liveTV
As I continue playing with the system, it appears that it records OK, but will segfault in the same way when playing a prerecorded show. I can do a cat from /dev/video0 to a temp file, load that into the video library and watch it. I can import an mpg from the internet and watch it through the video library I told myth to record directly into the video library and can watch it through there. So, I know the card is good. What is different between watching 'live tv' / 'prerecorded tv' and the mpgs? On 8/20/05, Blastzone [EMAIL PROTECTED] wrote: I'm not real worried about the modprobing.. that's easily fixed with a script. I re-emerged with the -opengl and -nvidia flags in the USE line, but still no joy. Here's the output from mythfrontend -v all: (fyi - floyd is the machine name) 2005-08-20 20:00:56.780 New DB connection, total: 1 Total desktop width=1024, height=768, numscreens=1 2005-08-20 20:00:56.785 Using screen 0, 1024x768 at 0,0 2005-08-20 20:00:56.789 mythfrontend version: 0.18.1.20050510-1 www.mythtv.org 2005-08-20 20:00:56.790 Enabled verbose msgs :all 2005-08-20 20:00:56.854 max_width: 1024 max_height: 768 2005-08-20 20:00:56.921 Switching to square mode (G.A.N.T.) 2005-08-20 20:00:57.249 Registering Internal as a media playback plugin. 2005-08-20 20:00:57.260 Registering MythDVD DVD Media Handler as a media handler 2005-08-20 20:00:57.260 Registering MythDVD VCD Media Handler as a media handler 2005-08-20 20:00:57.391 Registering MythMusic Media Handler as a media handler 2005-08-20 20:01:02.492 New DB connection, total: 2 2005-08-20 20:01:02.509 Connecting to backend server: 127.0.0.1:6543 (try 1 of 5) 2005-08-20 20:01:02.510 write-12 21 MYTH_PROTO_VERSION 15: 2005-08-20 20:01:02.517 Using protocol version 15 2005-08-20 20:01:02.517 write-12 20 ANN Playback floyd 0: 2005-08-20 20:01:02.531 write-12 29 GET_NEXT_FREE_RECORDER[]:[]-1: 2005-08-20 20:01:02.539 20 ANN Playback floyd 1 2005-08-20 20:01:02.540 write-14 21 MYTH_PROTO_VERSION 15: 2005-08-20 20:01:02.550 Using protocol version 15 2005-08-20 20:01:02.550 write-14 20 ANN Playback floyd 0: 2005-08-20 20:01:02.555 write-14 44 QUERY_RECORDER 1[]:[]SETUP_RING_BUFFE... 2005-08-20 20:01:02.563 write-15 20 ANN Playback floyd 0: 2005-08-20 20:01:02.570 write-16 22 ANN RingBuffer floyd 1: 2005-08-20 20:01:02.577 write-14 33 QUERY_RECORDER 1[]:[]SPAWN_LIVETV: 2005-08-20 20:01:02.649 write-14 37 QUERY_RECORDER 1[]:[]GET_PROGRAM_INFO: 2005-08-20 20:01:02.660 Output filters for this channel are: '' 2005-08-20 20:01:02.661 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:03.661 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:03.661 write-15 66 QUERY_RECORDER 1[]:[]SEEK_RINGBUF[]:[... 2005-08-20 20:01:03.668 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:03.675 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:03.676 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:03.930 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:03.931 write-15 73 QUERY_RECORDER 1[]:[]SEEK_RINGBUF[]:[... 2005-08-20 20:01:03.937 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:03.943 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:03.945 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:04.237 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:04.238 write-15 73 QUERY_RECORDER 1[]:[]SEEK_RINGBUF[]:[... 2005-08-20 20:01:04.245 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:04.251 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:04.252 write-15 73 QUERY_RECORDER 1[]:[]SEEK_RINGBUF[]:[... 2005-08-20 20:01:04.259 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:04.340 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:04.342 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:04.517 Read(): reqd=128000, rcvd=128000, rept=128000, error=0 2005-08-20 20:01:04.518 AVFD 2005-08-20 20:01:04.518 AVFD: Opening Stream #0: codec id 2 2005-08-20 20:01:04.518 write-15 53 QUERY_RECORDER 1[]:[]REQUEST_BLOCK_RI... 2005-08-20 20:01:04.519 Using libmpeg2 for video decoding 2005-08-20 20:01:04.520 detectInterlace(Detect Scan, Detect Scan, 29.97, 480) -Interlaced Scan 2005-08-20 20:01:04.520 Interlaced: Interlaced Scan video_height: 480 fps: 29.97 2005-08-20 20:01:04.520 AVFD: Looking for decoder for 2 2005-08-20 20:01:04.520 AVFD 2005-08-20 20:01:04.520 AVFD: Opening Stream #1: codec id 86016 2005-08-20 20:01:04.520 AVFD: Looking for decoder for 86016 2005-08-20 20:01:04.523 Stream #1 (audio track #0) is an audio stream with 2 channels. 2005-08-20 20:01:04.523
Re: [mythtv-users] Problems running Myth - segfault starting liveTV
On 08/20/05 23:48, Blastzone wrote: As I continue playing with the system, it appears that it records OK, but will segfault in the same way when playing a prerecorded show. I can do a cat from /dev/video0 to a temp file, load that into the video library and watch it. I can import an mpg from the internet and watch it through the video library I told myth to record directly into the video library and can watch it through there. So, I know the card is good. What is different between watching 'live tv' / 'prerecorded tv' and the mpgs? Watching Live TV/Recordings uses Myth's internal player. Watching videos through MythVideo uses an external player (by default MPlayer, but you can change it to use xine or whatever). Note that you can specify the player Internal to use Myth's internal player for MythVideo. So, basically, it means your Myth is configured wrong, but your external video player (probably MPlayer) is configured right. Mike ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users