Re: [mythtv-users] URC-6131 & ~mythtv/.mythtv/lircrc not working
Now that I have done a re-install with Fedora Core 3 (pain in the butt with the exceptions that have to be done!), I took a look at this. It seems that the problem is really that MythTV/lirc is bombing out on the file due to the fact that I apparently uploaded it to my website in DOS format. As soon as I ran dos2unix, on the file, everything was fine. I will fix the file at some point, I have some button remappings that I want to do. -- Joe --- John <[EMAIL PROTECTED]> wrote: > Okay I took a look at the lircrc file a bit closer > and I modified the > lines in the above suggestion and tried loading it > again. Still no > go. Same error on same lines. So then I decided to > put a space > between "#begin" and "#end" for the first "POWER > button" setting. > Now this shouldn't make a difference since there are > other lines > further down that are commented out like this but my > hope would be > that the error would move to a different line. Well > it worked! > Lircrc loaded without any errors and now the remote > works (even with > the lines as they are below). Go figure. Attached > is my "working" > lircrc file. Still need to tweak buttons. :) > > John > > P.S. When I enter a channel number it doesn't change > to that channel > instead it displays info about it at the bottom of > the screen. Is > this a setting somewhere in myth? Again Thanks for > all the help. > > ATTACHMENT part 2 application/octet-stream name=lircrc > ___ > mythtv-users mailing list > mythtv-users@mythtv.org > http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users > __ Do you Yahoo!? Take Yahoo! Mail with you! Get it on your mobile phone. http://mobile.yahoo.com/maildemo ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] URC-6131 & ~mythtv/.mythtv/lircrc not working
Okay I took a look at the lircrc file a bit closer and I modified the lines in the above suggestion and tried loading it again. Still no go. Same error on same lines. So then I decided to put a space between "#begin" and "#end" for the first "POWER button" setting. Now this shouldn't make a difference since there are other lines further down that are commented out like this but my hope would be that the error would move to a different line. Well it worked! Lircrc loaded without any errors and now the remote works (even with the lines as they are below). Go figure. Attached is my "working" lircrc file. Still need to tweak buttons. :) John P.S. When I enter a channel number it doesn't change to that channel instead it displays info about it at the bottom of the screen. Is this a setting somewhere in myth? Again Thanks for all the help. lircrc Description: Binary data ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] URC-6131 & ~mythtv/.mythtv/lircrc not working
On Sunday 23 January 2005 2:39 pm, John wrote: > I have an One For ALL remote model URC-6131 and I'm trying to get it > working using myth. I've recently installed Myth via Jarods guide. > One of the last issues is I'm still working on getting my remote to > work in Myth. Currently I'm using a lircd.conf and lircrc file that I > found on vulturesnest.net. Attached you'll find both files. When > using the irw program I can see my key presses just fine. When > starting mythfrontend in verbose mode this is what I see in the > background: > > " in /home/mythtv/.mythtv/lircrc:8 ignored > " in /home/mythtv/.mythtv/lircrc:10 ignored > mythtv: bad file format, /home/mythtv/.mythtv/lircrc:11 > Failed to read lirc config /home/mythtv/.mythtv/lircrc for mythtv > > > Am I doing something wrong. The Hauppauge worked fine a few days ago > when I last tested it (I have a PVR-350). When comparing to other > lircrc files its looks perfectly normal other than the indentation. > > Any suggestions? > > John I would think that LIRC would not like the SubpictureMenu definition that leaves the remote and button values set to 'xx'. Probably dumps out trying to parse that. You could also check for bad characters elsewhere, though the other button definitions look OK to me. HTH! -- Harry O. ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
[mythtv-users] URC-6131 & ~mythtv/.mythtv/lircrc not working
I have an One For ALL remote model URC-6131 and I'm trying to get it working using myth. I've recently installed Myth via Jarods guide. One of the last issues is I'm still working on getting my remote to work in Myth. Currently I'm using a lircd.conf and lircrc file that I found on vulturesnest.net. Attached you'll find both files. When using the irw program I can see my key presses just fine. When starting mythfrontend in verbose mode this is what I see in the background: " in /home/mythtv/.mythtv/lircrc:8 ignored " in /home/mythtv/.mythtv/lircrc:10 ignored mythtv: bad file format, /home/mythtv/.mythtv/lircrc:11 Failed to read lirc config /home/mythtv/.mythtv/lircrc for mythtv Am I doing something wrong. The Hauppauge worked fine a few days ago when I last tested it (I have a PVR-350). When comparing to other lircrc files its looks perfectly normal other than the indentation. Any suggestions? John lircrc Description: Binary data ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
