Re: [mythtv-users] Help with pcHDTV
Just to be sure, I took the PVR-250 out of the box. Also, I ran the atscscan as root. # ls -l /dev/dvb total 175 drwxr-xr-x 6 root root144 2005-04-01 02:07 . drwxr-xr-x 35 root root 178680 2005-12-09 10:11 .. drwxr-xr-x 2 root root248 2005-04-01 02:07 adapter0 drwxr-xr-x 2 root root248 2005-04-01 02:07 adapter1 drwxr-xr-x 2 root root248 2005-04-01 02:07 adapter2 drwxr-xr-x 2 root root248 2005-04-01 02:07 adapter3 ls -l /dev/dvb/adapter0 total 0 drwxr-xr-x 2 root root 248 2005-04-01 02:07 . drwxr-xr-x 6 root root 144 2005-04-01 02:07 .. crw-rw 1 root video 250, 1 2004-06-30 14:04 audio0 crw-rw 1 root video 250, 6 2004-06-30 14:04 ca0 crw-rw 1 root video 250, 4 2004-06-30 14:04 demux0 crw-rw 1 root video 250, 5 2004-06-30 14:04 dvr0 crw-rw 1 root video 250, 3 2004-06-30 14:04 frontend0 crw-rw 1 root video 250, 7 2004-06-30 14:04 net0 crw-rw 1 root video 250, 8 2004-06-30 14:04 osd0 crw-rw 1 root video 250, 0 2004-06-30 14:04 video0 ls -l /usr/lib/hotplug/firmware total 48 drwxr-xr-x 2 root root 168 2005-04-06 12:44 . drwxr-xr-x 3 root root72 2005-04-01 02:10 .. -rw-r--r-- 1 root root 12772 2005-04-06 12:44 dvb-fe-or51132-qam.fw -rw-r--r-- 1 root root 17532 2005-04-06 12:44 dvb-fe-or51132-vsb.fw -rw-r--r-- 1 root root 8518 2005-04-06 12:44 dvb-fe-or51211.fw I too didn't see it loading the firmware --- but I don't get any error messages either. The messages in /var/log/message stop at: Dec 9 10:13:20 video kernel: DVB: registering frontend 0 (Oren OR51132 VSB/QAM Frontend)... The atscscan doesn't generate any more messages, including any possible errors loading the firmware. Thanks! emike Keith C wrote: On Dec 9, 2005, at 2:16 PM, E. Mike Durbin wrote: Hi. I've been using MythTV for over a year now with a PVR-250. However, I can't get my new pcHDTV 3000 to work. I compile with the DVB modules. /var/log/message: Dec 9 10:13:20 video kernel: cx2388x v4l2 driver version 0.0.5 loaded Dec 9 10:13:20 video kernel: ACPI: PCI Interrupt :04:00.0[A] -> GSI 16 (level, low) -> IRQ 16 Dec 9 10:13:20 video kernel: CORE cx88[0]: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22,autodetected] Dec 9 10:13:20 video kernel: TV tuner 52 at 0x1fe, Radio tuner -1 at 0x1fe Dec 9 10:13:20 video kernel: tuner 1-0061: chip found @ 0xc2 (cx88[0]) Dec 9 10:13:20 video kernel: tuner 1-0061: type set to 52 (Thomson DDT 7610 (ATSC/NTSC)) Dec 9 10:13:20 video kernel: cx88[0]/0: found at :04:00.0, rev: 5, irq: 16, latency: 64, mmio: 0xdd00 Dec 9 10:13:20 video kernel: cx88[0]/0: registered device video0 [v4l2] Dec 9 10:13:20 video kernel: cx88[0]/0: registered device vbi0 Dec 9 10:13:20 video kernel: cx88[0]/0: registered device radio0 Dec 9 10:13:20 video kernel: cx2388x dvb driver version 0.0.5 loaded Dec 9 10:13:20 video kernel: ACPI: PCI Interrupt :04:00.2[A] -> GSI 16 (level, low) -> IRQ 16 Dec 9 10:13:20 video kernel: cx88[0]/2: found at :04:00.2, rev: 5, irq: 16, latency: 64, mmio: 0xde00 Dec 9 10:13:20 video kernel: cx88[0]/2: cx2388x based dvb card Dec 9 10:13:20 video kernel: DVB: registering new adapter (cx88[0]). Dec 9 10:13:20 video kernel: DVB: registering frontend 0 (Oren OR51132 VSB/QAM Frontend)... This looks good, but when I try dvb-apps: cd dvb-apps/util/scan && ./atscscan atsc/us-NTSC-center-frequencies-8VSB I get: scanning atsc/us-NTSC-center-frequencies-8VSB using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' main:2229: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 6 No such device or address That is a little strange. Hopefully your PVR-250 is now on /dev/video1 (set the first minor option to move it), since the HD3000 is grabbing video0. Here's my /dev/dvb for my HD3000 (which I run with a PVR500): # find /dev/dvb /dev/dvb /dev/dvb/adapter0 /dev/dvb/adapter0/frontend0 /dev/dvb/adapter0/demux0 /dev/dvb/adapter0/ca0 /dev/dvb/adapter0/osd0 /dev/dvb/adapter0/net0 /dev/dvb/adapter0/audio0 /dev/dvb/adapter0/video0 /dev/dvb/adapter0/dvr0 /dev/dvb/adapter1 /dev/dvb/adapter2 /dev/dvb/adapter3 It might be a permissions issue on the devices, but your error says no such device, so probably not. Keith C ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] Help with pcHDTV
On Fri, Dec 09, 2005 at 02:16:43PM -0600, E. Mike Durbin wrote: > > Hi. I've been using MythTV for over a year now with a > PVR-250. > > However, I can't get my new pcHDTV 3000 to work. > > I compile with the DVB modules. > > /var/log/message: > > Dec 9 10:13:20 video kernel: cx2388x v4l2 driver version 0.0.5 loaded > Dec 9 10:13:20 video kernel: ACPI: PCI Interrupt :04:00.0[A] -> GSI > 16 (level, low) -> IRQ 16 > Dec 9 10:13:20 video kernel: CORE cx88[0]: subsystem: 7063:3000, board: > pcHDTV HD3000 HDTV [card=22,autodetected] > Dec 9 10:13:20 video kernel: TV tuner 52 at 0x1fe, Radio tuner -1 at 0x1fe > Dec 9 10:13:20 video kernel: tuner 1-0061: chip found @ 0xc2 (cx88[0]) > Dec 9 10:13:20 video kernel: tuner 1-0061: type set to 52 (Thomson DDT > 7610 (ATSC/NTSC)) > Dec 9 10:13:20 video kernel: cx88[0]/0: found at :04:00.0, rev: 5, > irq: 16, latency: 64, mmio: 0xdd00 > Dec 9 10:13:20 video kernel: cx88[0]/0: registered device video0 [v4l2] > Dec 9 10:13:20 video kernel: cx88[0]/0: registered device vbi0 > Dec 9 10:13:20 video kernel: cx88[0]/0: registered device radio0 > Dec 9 10:13:20 video kernel: cx2388x dvb driver version 0.0.5 loaded > Dec 9 10:13:20 video kernel: ACPI: PCI Interrupt :04:00.2[A] -> GSI > 16 (level, low) -> IRQ 16 > Dec 9 10:13:20 video kernel: cx88[0]/2: found at :04:00.2, rev: 5, > irq: 16, latency: 64, mmio: 0xde00 > Dec 9 10:13:20 video kernel: cx88[0]/2: cx2388x based dvb card > Dec 9 10:13:20 video kernel: DVB: registering new adapter (cx88[0]). > Dec 9 10:13:20 video kernel: DVB: registering frontend 0 (Oren OR51132 > VSB/QAM Frontend)... > > This looks good, but when I try dvb-apps: > >cd dvb-apps/util/scan && ./atscscan atsc/us-NTSC-center-frequencies-8VSB > > I get: > >scanning atsc/us-NTSC-center-frequencies-8VSB >using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' >main:2229: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 6 No > such device or address I don't see it loading the firmware.. did you download it from pchdtv's site? There's over the air and qam firmware, you can have one or both loaded, but you need one. Google for the pchdtv howto (The wiki version) and you'll see the instructions on how to install it, or there may be a readme in the tarball for the firmware that also says where to put them, typically. /usr/lib/hotplug/firmware/dvb-fe-or51132-X.fw --Brandon ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] Help with pcHDTV
On Friday 09 December 2005 15:16, E. Mike Durbin wrote: > Hi. I've been using MythTV for over a year now with a > PVR-250. > > However, I can't get my new pcHDTV 3000 to work. > > I compile with the DVB modules. > > /var/log/message: > > Dec 9 10:13:20 video kernel: cx2388x v4l2 driver version 0.0.5 loaded > Dec 9 10:13:20 video kernel: ACPI: PCI Interrupt :04:00.0[A] -> GSI > 16 (level, low) -> IRQ 16 > Dec 9 10:13:20 video kernel: CORE cx88[0]: subsystem: 7063:3000, board: > pcHDTV HD3000 HDTV [card=22,autodetected] > Dec 9 10:13:20 video kernel: TV tuner 52 at 0x1fe, Radio tuner -1 at 0x1fe > Dec 9 10:13:20 video kernel: tuner 1-0061: chip found @ 0xc2 (cx88[0]) > Dec 9 10:13:20 video kernel: tuner 1-0061: type set to 52 (Thomson DDT > 7610 (ATSC/NTSC)) > Dec 9 10:13:20 video kernel: cx88[0]/0: found at :04:00.0, rev: 5, > irq: 16, latency: 64, mmio: 0xdd00 > Dec 9 10:13:20 video kernel: cx88[0]/0: registered device video0 [v4l2] > Dec 9 10:13:20 video kernel: cx88[0]/0: registered device vbi0 > Dec 9 10:13:20 video kernel: cx88[0]/0: registered device radio0 > Dec 9 10:13:20 video kernel: cx2388x dvb driver version 0.0.5 loaded > Dec 9 10:13:20 video kernel: ACPI: PCI Interrupt :04:00.2[A] -> GSI > 16 (level, low) -> IRQ 16 > Dec 9 10:13:20 video kernel: cx88[0]/2: found at :04:00.2, rev: 5, > irq: 16, latency: 64, mmio: 0xde00 > Dec 9 10:13:20 video kernel: cx88[0]/2: cx2388x based dvb card > Dec 9 10:13:20 video kernel: DVB: registering new adapter (cx88[0]). > Dec 9 10:13:20 video kernel: DVB: registering frontend 0 (Oren OR51132 > VSB/QAM Frontend)... > > This looks good, but when I try dvb-apps: > > cd dvb-apps/util/scan && ./atscscan > atsc/us-NTSC-center-frequencies-8VSB > > I get: > > scanning atsc/us-NTSC-center-frequencies-8VSB > using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > main:2229: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 6 No > such device or address > > Sorry, but I'm baffled. > > Any help? Suggestions? > > emike what does ls -l /dev/dvb/adapter* show? are you running the dvb-apps as root? -- Steve ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] Help with pcHDTV
On Dec 9, 2005, at 2:16 PM, E. Mike Durbin wrote: Hi. I've been using MythTV for over a year now with a PVR-250. However, I can't get my new pcHDTV 3000 to work. I compile with the DVB modules. /var/log/message: Dec 9 10:13:20 video kernel: cx2388x v4l2 driver version 0.0.5 loaded Dec 9 10:13:20 video kernel: ACPI: PCI Interrupt :04:00.0[A] - > GSI 16 (level, low) -> IRQ 16 Dec 9 10:13:20 video kernel: CORE cx88[0]: subsystem: 7063:3000, board: pcHDTV HD3000 HDTV [card=22,autodetected] Dec 9 10:13:20 video kernel: TV tuner 52 at 0x1fe, Radio tuner -1 at 0x1fe Dec 9 10:13:20 video kernel: tuner 1-0061: chip found @ 0xc2 (cx88 [0]) Dec 9 10:13:20 video kernel: tuner 1-0061: type set to 52 (Thomson DDT 7610 (ATSC/NTSC)) Dec 9 10:13:20 video kernel: cx88[0]/0: found at :04:00.0, rev: 5, irq: 16, latency: 64, mmio: 0xdd00 Dec 9 10:13:20 video kernel: cx88[0]/0: registered device video0 [v4l2] Dec 9 10:13:20 video kernel: cx88[0]/0: registered device vbi0 Dec 9 10:13:20 video kernel: cx88[0]/0: registered device radio0 Dec 9 10:13:20 video kernel: cx2388x dvb driver version 0.0.5 loaded Dec 9 10:13:20 video kernel: ACPI: PCI Interrupt :04:00.2[A] - > GSI 16 (level, low) -> IRQ 16 Dec 9 10:13:20 video kernel: cx88[0]/2: found at :04:00.2, rev: 5, irq: 16, latency: 64, mmio: 0xde00 Dec 9 10:13:20 video kernel: cx88[0]/2: cx2388x based dvb card Dec 9 10:13:20 video kernel: DVB: registering new adapter (cx88[0]). Dec 9 10:13:20 video kernel: DVB: registering frontend 0 (Oren OR51132 VSB/QAM Frontend)... This looks good, but when I try dvb-apps: cd dvb-apps/util/scan && ./atscscan atsc/us-NTSC-center- frequencies-8VSB I get: scanning atsc/us-NTSC-center-frequencies-8VSB using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' main:2229: FATAL: failed to open '/dev/dvb/adapter0/frontend0': 6 No such device or address That is a little strange. Hopefully your PVR-250 is now on /dev/ video1 (set the first minor option to move it), since the HD3000 is grabbing video0. Here's my /dev/dvb for my HD3000 (which I run with a PVR500): # find /dev/dvb /dev/dvb /dev/dvb/adapter0 /dev/dvb/adapter0/frontend0 /dev/dvb/adapter0/demux0 /dev/dvb/adapter0/ca0 /dev/dvb/adapter0/osd0 /dev/dvb/adapter0/net0 /dev/dvb/adapter0/audio0 /dev/dvb/adapter0/video0 /dev/dvb/adapter0/dvr0 /dev/dvb/adapter1 /dev/dvb/adapter2 /dev/dvb/adapter3 It might be a permissions issue on the devices, but your error says no such device, so probably not. Keith C ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] Help with pcHDTV-2000
Quoting Brandon Beattie <[EMAIL PROTECTED]>: > On Fri, Feb 25, 2005 at 09:04:32AM -0800, Nathan Whittacre wrote: > > I actually followed those steps pretty closely. That's how I got the > > video working. US-broadcast is the frequency table, and only the HD > > channels are selected in Zap2It. I'm not sure what it is. > > > > Nathan > > What if you try to record a show? Does that work? > > --Brandon > Recording does work now. I had to remove a few channels that don't have good signal. Now I am having trouble with changing channels. It locks up the frontend on channel change. Any ideas? Thanks! --Nathan ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] Help with pcHDTV-2000
On Fri, Feb 25, 2005 at 09:04:32AM -0800, Nathan Whittacre wrote: > I actually followed those steps pretty closely. That's how I got the > video working. US-broadcast is the frequency table, and only the HD > channels are selected in Zap2It. I'm not sure what it is. > > Nathan What if you try to record a show? Does that work? --Brandon ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] Help with pcHDTV-2000
I actually followed those steps pretty closely. That's how I got the video working. US-broadcast is the frequency table, and only the HD channels are selected in Zap2It. I'm not sure what it is. Nathan Brandon Beattie wrote: On Fri, Feb 25, 2005 at 08:46:33AM -0800, Nathan Whittacre wrote: Hello all, I have had a pcHDTV2000 sitting on my shelf for over a year now and finally am trying to get it to work with MythTV. I am running FC2 with myth 0.17 using the 2.6.9 FC2 kernel. I installed the pcHDTV 1.6 drivers, and it detects the card without a problem. I can get video using tvtime and mplayer. When I configure myth, it gives me the option of Antenna-0 and Antenna-1 for the inputs. I was under the impression that Antenna-x was for the pcHDTV-3000 card, but the pcHDTV-2000 used Television-0 and Television-1. Tvtime even uses Television-0 as the input and it works. I don't get any tv video from MythTV and it hangs up my frontend when I try to watch live tv. Any suggestions on getting this to work? I really think it has to do with the input selector in mythtvsetup, but it won't allow me to select anything other than Antenna-x. Help please... I'd recommend you review your steps here: http://www.linuxis.us/linux/media/howto/pchdtv/ Did you make sure you selected US-Broadcast as the frequency table? Do you only have HD channels set up in your zap2it config? I'd have to go check if mind was Antenna or Television or which input (0 or 1) it uses but I'm fairly certain it was 0. I don't think the Ant vs Tel names matter? --Brandon ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users
Re: [mythtv-users] Help with pcHDTV-2000
On Fri, Feb 25, 2005 at 08:46:33AM -0800, Nathan Whittacre wrote: > Hello all, > > I have had a pcHDTV2000 sitting on my shelf for over a year now and > finally am trying to get it to work with MythTV. I am running FC2 with > myth 0.17 using the 2.6.9 FC2 kernel. I installed the pcHDTV 1.6 > drivers, and it detects the card without a problem. I can get video > using tvtime and mplayer. When I configure myth, it gives me the option > of Antenna-0 and Antenna-1 for the inputs. I was under the impression > that Antenna-x was for the pcHDTV-3000 card, but the pcHDTV-2000 used > Television-0 and Television-1. Tvtime even uses Television-0 as the > input and it works. I don't get any tv video from MythTV and it hangs > up my frontend when I try to watch live tv. Any suggestions on getting > this to work? I really think it has to do with the input selector in > mythtvsetup, but it won't allow me to select anything other than > Antenna-x. Help please... I'd recommend you review your steps here: http://www.linuxis.us/linux/media/howto/pchdtv/ Did you make sure you selected US-Broadcast as the frequency table? Do you only have HD channels set up in your zap2it config? I'd have to go check if mind was Antenna or Television or which input (0 or 1) it uses but I'm fairly certain it was 0. I don't think the Ant vs Tel names matter? --Brandon ___ mythtv-users mailing list mythtv-users@mythtv.org http://mythtv.org/cgi-bin/mailman/listinfo/mythtv-users