Re: [neonixie-l] B-5971 Smartsocket / Driver
Yeah it took a while for my sealed box if IN-18 tubes to show from Russia. You know I think John Taylor sells two lengths of them too. I can wait though. Let me know know if you need anything from me. I'm waiting on 8 IV-13 queen numitrons and a 4 side iv-13 numi queen clock from Russia right now. I've got other tubes and stuff coming from places all over Russia too lol. I order stuff all the time. B On Wed, Apr 17, 2019, 9:29 PM Michail Wilson wrote: > Bill / Thomas, > > > > I have most of the parts already. > > The circuit boards and the socket pins are left. > > > > The boards tracking is: > > > https://www.ups.com/track?loc=en_US&tracknum=1ZF51V700296347533&requester=WT/trackdetails > > > > The problem is that the pins will take a long time (coming from Russia). > > *RO184731146RU* At least it shows it is on the way. J > > > > I am out of state until the 22nd. > > > > > > > > Michail > > > > *From:* neonixie-l@googlegroups.com [mailto:neonixie-l@googlegroups.com] *On > Behalf Of *Thomas Kummer > *Sent:* Monday, April 8, 2019 12:44 PM > *To:* neonixie-l@googlegroups.com > *Subject:* Re: [neonixie-l] B-5971 Smartsocket / Driver > > > > I want to run a 6 digit clock. lol > > Sent from my iPhone > > > On Apr 8, 2019, at 13:43, Thomas Kummer wrote: > > Yes I would like six smart socket sets. > > Sent from my iPhone > > > On Apr 8, 2019, at 12:30, Bill Notfaded wrote: > > If Thomas doesn't want the other 6 I'll take them. :^} > > On Monday, April 8, 2019 at 9:25:48 AM UTC-7, Bill Notfaded wrote: > > I'm in for 6 smartsockets (one set)... that way Thomas can have a set of 6 > as well. > > > > Thanks, > > > > Bill > > On Monday, April 8, 2019 at 8:58:16 AM UTC-7, M1 wrote: > > Ok, I’ve finally finished ordering all the parts. Coming from various > sources, so, not sure when complete. > > Little more spendy than I thought, but that’s life. > > > > I will have enough boards for 40 exactly; although extra parts on > everything else. Everything from USA shipping except the socket pins which > have an ETA of May 7th (likely sooner, I hope). > > > > Of the 40 kits, I want 24 (for my tubes). So, 16 will be available. > > Noting that Bill and Thomas have first shot when I finalize costs. > > > > PS. Yes, I have the .hex from the yahoo forum and source, pics, etc. > > You said two sets (does that mean 2 kits or 2 sets of xyz kits) > > > > Michail Wilson > > 206-920-6312 > > > > > > neoni...@googlegroups.com; on behalf of; Thomas Kummer [ > tmkumm...@gmail.com] > > > > Put me down for one kit too please. > > Thank you, Michail > > Sent from my iPhone > > > > > > *From:* neoni...@googlegroups.com [mailto:neoni...@googlegroups.com] *On > Behalf Of *Bill Notfaded > *Sent:* Thursday, April 4, 2019 7:07 PM > *To:* neoni...@googlegroups.com > *Subject:* Re: [neonixie-l] B-5971 Smartsocket / Driver > > > > I'm in put me down for two sets at least. Did you get the PIC hex too? > This is exciting stuff! Thanks Michail! > > On Thu, Apr 4, 2019, 7:03 PM Michail Wilson wrote: > > I was able to get the files from Yahoo Groups. > > I've decided to go about putting the kits together myself since I will > have about 24 tubes. > > So, I just ordered 40 sets of the boards to have extras in case anyone > wants kits. > > Michail > . > > -- > You received this message because you are subscribed to the Google Groups > "neonixie-l" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to neonixie-l+unsubscr...@googlegroups.com. > To post to this group, send email to neonixie-l@googlegroups.com. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/neonixie-l/5f723279-0078-49a2-8507-3fa7784fcb92%40googlegroups.com > <https://groups.google.com/d/msgid/neonixie-l/5f723279-0078-49a2-8507-3fa7784fcb92%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "neonixie-l" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to neonixie-l+unsubscr...@googlegroups.com. > To post to this group, send email to neonixie-l@googlegroups.com. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/neonixie-l/A03959F6-9CCA-4DCB-BA0F-293B589DE3F1%40gmail.com > <https://groups.google.com/d/msgid/neonixie
Re: [neonixie-l] B-5971 Smartsocket / Driver
That's so awesome I was just thinking about it today. That guy has two more sets still haven't sold for 369$. Serves him right lol. I wish I'd talked to you more before I might have tried to get two sets for 500 or something too. B On Wed, Apr 17, 2019, 9:29 PM Michail Wilson wrote: > Bill / Thomas, > > > > I have most of the parts already. > > The circuit boards and the socket pins are left. > > > > The boards tracking is: > > > https://www.ups.com/track?loc=en_US&tracknum=1ZF51V700296347533&requester=WT/trackdetails > > > > The problem is that the pins will take a long time (coming from Russia). > > *RO184731146RU* At least it shows it is on the way. J > > > > I am out of state until the 22nd. > > > > > > > > Michail > > > > *From:* neonixie-l@googlegroups.com [mailto:neonixie-l@googlegroups.com] *On > Behalf Of *Thomas Kummer > *Sent:* Monday, April 8, 2019 12:44 PM > *To:* neonixie-l@googlegroups.com > *Subject:* Re: [neonixie-l] B-5971 Smartsocket / Driver > > > > I want to run a 6 digit clock. lol > > Sent from my iPhone > > > On Apr 8, 2019, at 13:43, Thomas Kummer wrote: > > Yes I would like six smart socket sets. > > Sent from my iPhone > > > On Apr 8, 2019, at 12:30, Bill Notfaded wrote: > > If Thomas doesn't want the other 6 I'll take them. :^} > > On Monday, April 8, 2019 at 9:25:48 AM UTC-7, Bill Notfaded wrote: > > I'm in for 6 smartsockets (one set)... that way Thomas can have a set of 6 > as well. > > > > Thanks, > > > > Bill > > On Monday, April 8, 2019 at 8:58:16 AM UTC-7, M1 wrote: > > Ok, I’ve finally finished ordering all the parts. Coming from various > sources, so, not sure when complete. > > Little more spendy than I thought, but that’s life. > > > > I will have enough boards for 40 exactly; although extra parts on > everything else. Everything from USA shipping except the socket pins which > have an ETA of May 7th (likely sooner, I hope). > > > > Of the 40 kits, I want 24 (for my tubes). So, 16 will be available. > > Noting that Bill and Thomas have first shot when I finalize costs. > > > > PS. Yes, I have the .hex from the yahoo forum and source, pics, etc. > > You said two sets (does that mean 2 kits or 2 sets of xyz kits) > > > > Michail Wilson > > 206-920-6312 > > > > > > neoni...@googlegroups.com; on behalf of; Thomas Kummer [ > tmkumm...@gmail.com] > > > > Put me down for one kit too please. > > Thank you, Michail > > Sent from my iPhone > > > > > > *From:* neoni...@googlegroups.com [mailto:neoni...@googlegroups.com] *On > Behalf Of *Bill Notfaded > *Sent:* Thursday, April 4, 2019 7:07 PM > *To:* neoni...@googlegroups.com > *Subject:* Re: [neonixie-l] B-5971 Smartsocket / Driver > > > > I'm in put me down for two sets at least. Did you get the PIC hex too? > This is exciting stuff! Thanks Michail! > > On Thu, Apr 4, 2019, 7:03 PM Michail Wilson wrote: > > I was able to get the files from Yahoo Groups. > > I've decided to go about putting the kits together myself since I will > have about 24 tubes. > > So, I just ordered 40 sets of the boards to have extras in case anyone > wants kits. > > Michail > . > > -- > You received this message because you are subscribed to the Google Groups > "neonixie-l" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to neonixie-l+unsubscr...@googlegroups.com. > To post to this group, send email to neonixie-l@googlegroups.com. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/neonixie-l/5f723279-0078-49a2-8507-3fa7784fcb92%40googlegroups.com > <https://groups.google.com/d/msgid/neonixie-l/5f723279-0078-49a2-8507-3fa7784fcb92%40googlegroups.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "neonixie-l" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to neonixie-l+unsubscr...@googlegroups.com. > To post to this group, send email to neonixie-l@googlegroups.com. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/neonixie-l/A03959F6-9CCA-4DCB-BA0F-293B589DE3F1%40gmail.com > <https://groups.google.com/d/msgid/neonixie-l/A03959F6-9CCA-4DCB-BA0F-293B589DE3F1%40gmail.com?utm_medium=email&utm_source=footer> > . > For more options, visit https://groups.google.com/d/opto
RE: [neonixie-l] B-5971 Smartsocket / Driver
Bill / Thomas, I have most of the parts already. The circuit boards and the socket pins are left. The boards tracking is: https://www.ups.com/track?loc=en_US <https://www.ups.com/track?loc=en_US&tracknum=1ZF51V700296347533&requester=WT/trackdetails> &tracknum=1ZF51V700296347533&requester=WT/trackdetails The problem is that the pins will take a long time (coming from Russia). RO184731146RU At least it shows it is on the way. J I am out of state until the 22nd. Michail From: neonixie-l@googlegroups.com [mailto:neonixie-l@googlegroups.com] On Behalf Of Thomas Kummer Sent: Monday, April 8, 2019 12:44 PM To: neonixie-l@googlegroups.com Subject: Re: [neonixie-l] B-5971 Smartsocket / Driver I want to run a 6 digit clock. lol Sent from my iPhone On Apr 8, 2019, at 13:43, Thomas Kummer wrote: Yes I would like six smart socket sets. Sent from my iPhone On Apr 8, 2019, at 12:30, Bill Notfaded wrote: If Thomas doesn't want the other 6 I'll take them. :^} On Monday, April 8, 2019 at 9:25:48 AM UTC-7, Bill Notfaded wrote: I'm in for 6 smartsockets (one set)... that way Thomas can have a set of 6 as well. Thanks, Bill On Monday, April 8, 2019 at 8:58:16 AM UTC-7, M1 wrote: Ok, I’ve finally finished ordering all the parts. Coming from various sources, so, not sure when complete. Little more spendy than I thought, but that’s life. I will have enough boards for 40 exactly; although extra parts on everything else. Everything from USA shipping except the socket pins which have an ETA of May 7th (likely sooner, I hope). Of the 40 kits, I want 24 (for my tubes). So, 16 will be available. Noting that Bill and Thomas have first shot when I finalize costs. PS. Yes, I have the .hex from the yahoo forum and source, pics, etc. You said two sets (does that mean 2 kits or 2 sets of xyz kits) Michail Wilson 206-920-6312 neoni...@googlegroups.com; on behalf of; Thomas Kummer [tmkumm...@gmail.com] Put me down for one kit too please. Thank you, Michail Sent from my iPhone From: neoni...@googlegroups.com [mailto:neoni...@googlegroups.com] On Behalf Of Bill Notfaded Sent: Thursday, April 4, 2019 7:07 PM To: neoni...@googlegroups.com Subject: Re: [neonixie-l] B-5971 Smartsocket / Driver I'm in put me down for two sets at least. Did you get the PIC hex too? This is exciting stuff! Thanks Michail! On Thu, Apr 4, 2019, 7:03 PM Michail Wilson wrote: I was able to get the files from Yahoo Groups. I've decided to go about putting the kits together myself since I will have about 24 tubes. So, I just ordered 40 sets of the boards to have extras in case anyone wants kits. Michail . -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/5f723279-0078-49a2-8507-3fa7784fcb92%40googlegroups.com <https://groups.google.com/d/msgid/neonixie-l/5f723279-0078-49a2-8507-3fa7784fcb92%40googlegroups.com?utm_medium=email&utm_source=footer> . For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/A03959F6-9CCA-4DCB-BA0F-293B589DE3F1%40gmail.com <https://groups.google.com/d/msgid/neonixie-l/A03959F6-9CCA-4DCB-BA0F-293B589DE3F1%40gmail.com?utm_medium=email&utm_source=footer> . For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send an email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/00a401d4f59f%245faa0490%241efe0db0%24%40com. For more options, visit https://groups.google.com/d/optout.
Re: [neonixie-l] B-5971 Smartsocket / Driver
I want to run a 6 digit clock. lol Sent from my iPhone > On Apr 8, 2019, at 13:43, Thomas Kummer wrote: > > Yes I would like six smart socket sets. > > Sent from my iPhone > >> On Apr 8, 2019, at 12:30, Bill Notfaded wrote: >> >> If Thomas doesn't want the other 6 I'll take them. :^} >> >>> On Monday, April 8, 2019 at 9:25:48 AM UTC-7, Bill Notfaded wrote: >>> I'm in for 6 smartsockets (one set)... that way Thomas can have a set of 6 >>> as well. >>> >>> Thanks, >>> >>> Bill >>> >>>> On Monday, April 8, 2019 at 8:58:16 AM UTC-7, M1 wrote: >>>> Ok, I’ve finally finished ordering all the parts. Coming from various >>>> sources, so, not sure when complete. >>>> >>>> Little more spendy than I thought, but that’s life. >>>> >>>> >>>> >>>> I will have enough boards for 40 exactly; although extra parts on >>>> everything else. Everything from USA shipping except the socket pins >>>> which have an ETA of May 7th (likely sooner, I hope). >>>> >>>> >>>> >>>> Of the 40 kits, I want 24 (for my tubes). So, 16 will be available. >>>> >>>> Noting that Bill and Thomas have first shot when I finalize costs. >>>> >>>> >>>> >>>> PS. Yes, I have the .hex from the yahoo forum and source, pics, etc. >>>> >>>> You said two sets (does that mean 2 kits or 2 sets of xyz kits) >>>> >>>> >>>> >>>> Michail Wilson >>>> >>>> 206-920-6312 >>>> >>>> >>>> >>>> >>>> >>>> neoni...@googlegroups.com; on behalf of; Thomas Kummer >>>> [tmkumm...@gmail.com] >>>> >>>> >>>> >>>> Put me down for one kit too please. >>>> >>>> Thank you, Michail >>>> >>>> Sent from my iPhone >>>> >>>> >>>> >>>> >>>> >>>> From: neoni...@googlegroups.com [mailto:neoni...@googlegroups.com] On >>>> Behalf Of Bill Notfaded >>>> Sent: Thursday, April 4, 2019 7:07 PM >>>> To: neoni...@googlegroups.com >>>> Subject: Re: [neonixie-l] B-5971 Smartsocket / Driver >>>> >>>> >>>> >>>> I'm in put me down for two sets at least. Did you get the PIC hex too? >>>> This is exciting stuff! Thanks Michail! >>>> >>>> On Thu, Apr 4, 2019, 7:03 PM Michail Wilson wrote: >>>> >>>> I was able to get the files from Yahoo Groups. >>>> >>>> I've decided to go about putting the kits together myself since I will >>>> have about 24 tubes. >>>> >>>> So, I just ordered 40 sets of the boards to have extras in case anyone >>>> wants kits. >>>> >>>> Michail >>>> . >>>> >> >> -- >> You received this message because you are subscribed to the Google Groups >> "neonixie-l" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to neonixie-l+unsubscr...@googlegroups.com. >> To post to this group, send email to neonixie-l@googlegroups.com. >> To view this discussion on the web, visit >> https://groups.google.com/d/msgid/neonixie-l/5f723279-0078-49a2-8507-3fa7784fcb92%40googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send an email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/A03959F6-9CCA-4DCB-BA0F-293B589DE3F1%40gmail.com. For more options, visit https://groups.google.com/d/optout.
Re: [neonixie-l] B-5971 Smartsocket / Driver
Yes I would like six smart socket sets. Sent from my iPhone > On Apr 8, 2019, at 12:30, Bill Notfaded wrote: > > If Thomas doesn't want the other 6 I'll take them. :^} > >> On Monday, April 8, 2019 at 9:25:48 AM UTC-7, Bill Notfaded wrote: >> I'm in for 6 smartsockets (one set)... that way Thomas can have a set of 6 >> as well. >> >> Thanks, >> >> Bill >> >>> On Monday, April 8, 2019 at 8:58:16 AM UTC-7, M1 wrote: >>> Ok, I’ve finally finished ordering all the parts. Coming from various >>> sources, so, not sure when complete. >>> >>> Little more spendy than I thought, but that’s life. >>> >>> >>> >>> I will have enough boards for 40 exactly; although extra parts on >>> everything else. Everything from USA shipping except the socket pins which >>> have an ETA of May 7th (likely sooner, I hope). >>> >>> >>> >>> Of the 40 kits, I want 24 (for my tubes). So, 16 will be available. >>> >>> Noting that Bill and Thomas have first shot when I finalize costs. >>> >>> >>> >>> PS. Yes, I have the .hex from the yahoo forum and source, pics, etc. >>> >>> You said two sets (does that mean 2 kits or 2 sets of xyz kits) >>> >>> >>> >>> Michail Wilson >>> >>> 206-920-6312 >>> >>> >>> >>> >>> >>> neoni...@googlegroups.com; on behalf of; Thomas Kummer [tmkumm...@gmail.com] >>> >>> >>> >>> Put me down for one kit too please. >>> >>> Thank you, Michail >>> >>> Sent from my iPhone >>> >>> >>> >>> >>> >>> From: neoni...@googlegroups.com [mailto:neoni...@googlegroups.com] On >>> Behalf Of Bill Notfaded >>> Sent: Thursday, April 4, 2019 7:07 PM >>> To: neoni...@googlegroups.com >>> Subject: Re: [neonixie-l] B-5971 Smartsocket / Driver >>> >>> >>> >>> I'm in put me down for two sets at least. Did you get the PIC hex too? >>> This is exciting stuff! Thanks Michail! >>> >>> On Thu, Apr 4, 2019, 7:03 PM Michail Wilson wrote: >>> >>> I was able to get the files from Yahoo Groups. >>> >>> I've decided to go about putting the kits together myself since I will have >>> about 24 tubes. >>> >>> So, I just ordered 40 sets of the boards to have extras in case anyone >>> wants kits. >>> >>> Michail >>> . >>> > > -- > You received this message because you are subscribed to the Google Groups > "neonixie-l" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to neonixie-l+unsubscr...@googlegroups.com. > To post to this group, send email to neonixie-l@googlegroups.com. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/neonixie-l/5f723279-0078-49a2-8507-3fa7784fcb92%40googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send an email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/75051625-3D23-4397-8FDD-282444E71C57%40gmail.com. For more options, visit https://groups.google.com/d/optout.
Re: [neonixie-l] B-5971 Smartsocket / Driver
If Thomas doesn't want the other 6 I'll take them. :^} On Monday, April 8, 2019 at 9:25:48 AM UTC-7, Bill Notfaded wrote: > > I'm in for 6 smartsockets (one set)... that way Thomas can have a set of 6 > as well. > > Thanks, > > Bill > > On Monday, April 8, 2019 at 8:58:16 AM UTC-7, M1 wrote: >> >> Ok, I’ve finally finished ordering all the parts. Coming from various >> sources, so, not sure when complete. >> >> Little more spendy than I thought, but that’s life. >> >> >> >> I will have enough boards for 40 exactly; although extra parts on >> everything else. Everything from USA shipping except the socket pins which >> have an ETA of May 7th (likely sooner, I hope). >> >> >> >> Of the 40 kits, I want 24 (for my tubes). So, 16 will be available. >> >> Noting that Bill and Thomas have first shot when I finalize costs. >> >> >> >> PS. Yes, I have the .hex from the yahoo forum and source, pics, etc. >> >> You said two sets (does that mean 2 kits or 2 sets of xyz kits) >> >> >> >> Michail Wilson >> >> 206-920-6312 >> >> >> >> >> >> neoni...@googlegroups.com; on behalf of; Thomas Kummer [ >> tmkumm...@gmail.com] >> >> >> >> Put me down for one kit too please. >> >> Thank you, Michail >> >> Sent from my iPhone >> >> >> >> >> >> *From:* neoni...@googlegroups.com [mailto:neoni...@googlegroups.com] *On >> Behalf Of *Bill Notfaded >> *Sent:* Thursday, April 4, 2019 7:07 PM >> *To:* neoni...@googlegroups.com >> *Subject:* Re: [neonixie-l] B-5971 Smartsocket / Driver >> >> >> >> I'm in put me down for two sets at least. Did you get the PIC hex too? >> This is exciting stuff! Thanks Michail! >> >> On Thu, Apr 4, 2019, 7:03 PM Michail Wilson wrote: >> >> I was able to get the files from Yahoo Groups. >> >> I've decided to go about putting the kits together myself since I will >> have about 24 tubes. >> >> So, I just ordered 40 sets of the boards to have extras in case anyone >> wants kits. >> >> Michail >> . >> >> -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send an email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/5f723279-0078-49a2-8507-3fa7784fcb92%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
Re: [neonixie-l] B-5971 Smartsocket / Driver
I'm in for 6 smartsockets (one set)... that way Thomas can have a set of 6 as well. Thanks, Bill On Monday, April 8, 2019 at 8:58:16 AM UTC-7, M1 wrote: > > Ok, I’ve finally finished ordering all the parts. Coming from various > sources, so, not sure when complete. > > Little more spendy than I thought, but that’s life. > > > > I will have enough boards for 40 exactly; although extra parts on > everything else. Everything from USA shipping except the socket pins which > have an ETA of May 7th (likely sooner, I hope). > > > > Of the 40 kits, I want 24 (for my tubes). So, 16 will be available. > > Noting that Bill and Thomas have first shot when I finalize costs. > > > > PS. Yes, I have the .hex from the yahoo forum and source, pics, etc. > > You said two sets (does that mean 2 kits or 2 sets of xyz kits) > > > > Michail Wilson > > 206-920-6312 > > > > > > neoni...@googlegroups.com ; on behalf of; Thomas Kummer [ > tmkumm...@gmail.com ] > > > > Put me down for one kit too please. > > Thank you, Michail > > Sent from my iPhone > > > > > > *From:* neoni...@googlegroups.com [mailto: > neoni...@googlegroups.com ] *On Behalf Of *Bill Notfaded > *Sent:* Thursday, April 4, 2019 7:07 PM > *To:* neoni...@googlegroups.com > *Subject:* Re: [neonixie-l] B-5971 Smartsocket / Driver > > > > I'm in put me down for two sets at least. Did you get the PIC hex too? > This is exciting stuff! Thanks Michail! > > On Thu, Apr 4, 2019, 7:03 PM Michail Wilson > wrote: > > I was able to get the files from Yahoo Groups. > > I've decided to go about putting the kits together myself since I will > have about 24 tubes. > > So, I just ordered 40 sets of the boards to have extras in case anyone > wants kits. > > Michail > . > > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send an email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/7f8a9198-4d15-480a-8913-5efcaa30d25c%40googlegroups.com. For more options, visit https://groups.google.com/d/optout.
RE: [neonixie-l] B-5971 Smartsocket / Driver
Ok, I’ve finally finished ordering all the parts. Coming from various sources, so, not sure when complete. Little more spendy than I thought, but that’s life. I will have enough boards for 40 exactly; although extra parts on everything else. Everything from USA shipping except the socket pins which have an ETA of May 7th (likely sooner, I hope). Of the 40 kits, I want 24 (for my tubes). So, 16 will be available. Noting that Bill and Thomas have first shot when I finalize costs. PS. Yes, I have the .hex from the yahoo forum and source, pics, etc. You said two sets (does that mean 2 kits or 2 sets of xyz kits) Michail Wilson 206-920-6312 neonixie-l@googlegroups.com; on behalf of; Thomas Kummer [tmkummer66...@gmail.com] Put me down for one kit too please. Thank you, Michail Sent from my iPhone From: neonixie-l@googlegroups.com [mailto:neonixie-l@googlegroups.com] On Behalf Of Bill Notfaded Sent: Thursday, April 4, 2019 7:07 PM To: neonixie-l@googlegroups.com Subject: Re: [neonixie-l] B-5971 Smartsocket / Driver I'm in put me down for two sets at least. Did you get the PIC hex too? This is exciting stuff! Thanks Michail! On Thu, Apr 4, 2019, 7:03 PM Michail Wilson wrote: I was able to get the files from Yahoo Groups. I've decided to go about putting the kits together myself since I will have about 24 tubes. So, I just ordered 40 sets of the boards to have extras in case anyone wants kits. Michail . -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send an email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/004901d4ee23%24e1a797b0%24a4f6c710%24%40com. For more options, visit https://groups.google.com/d/optout.
Re: [neonixie-l] B-5971 Smartsocket / Driver
I think I see where you're going with this... Power up the smartsocket 5V right to left? If the delay is too large won't the same thing happen? Won't the tubes already turned on start the enumeration before the first tube is ready? It seems like maybe the initial delay before starting the enumeration in general is close to being too short. I suppose this is in the pic code. Bill On Sat, Apr 6, 2019, 4:23 AM 【ツ】John Smout wrote: > Just be aware that there is sometimes a startup issue with smartsockets. > This is something I have experienced myself and others have reported it > also. This results in a mangled display. Usually removing and restoring > power will cure the issue. Sometimes it might take a couple of tries. Once > in operation there is no further issue. > > What I think is happening is that when the sockets start up they > self-enumerate, the first socket daisy-chains to the next and they assign > themselves a number. If a later one in the chain is not yet ready, the > enumeration fails. I’ve had displays like 1-2-1-2 where I would expect > 1-2-3-4 for example. > > The possible fix might be to use the reset pin on the PIC, but the fuse > for the reset pin was disabled when the code was compiled. Fortunately this > pin is not used as an output and is still available. When I made the ZM1350 > smartsocket PCBs I added access to the reset pins so that the smartockets > could be reset in reverse order, to guarantee that each is ready at > startup. The fuse for the reset pin can then be changed in the programmer - > I use a Pickit - once the current hex file has been loaded into it. This > code can then be saved back out. Be sure to use a pullup on the reset lines > if they are to be used. > > It would then be up to whatever master controller you devise to send > resets to each of the smartsockets in turn before sending messages to them. > > Maybe there is a way to ensure appropriate delays for each socket by > delaying power to them - any suggestions? > > John S > > > On 6 Apr 2019, at 09:14, Thomas Kummer wrote: > > Put me down for one kit too please. > Thank you, Michail > > Sent from my iPhone > > On Apr 4, 2019, at 22:06, Bill Notfaded wrote: > > I'm in put me down for two sets at least. Did you get the PIC hex too? > This is exciting stuff! Thanks Michail! > > On Thu, Apr 4, 2019, 7:03 PM Michail Wilson wrote: > >> I was able to get the files from Yahoo Groups. >> >> I've decided to go about putting the kits together myself since I will >> have about 24 tubes. >> >> So, I just ordered 40 sets of the boards to have extras in case anyone >> wants kits. >> >> Michail >> >> -Original Message- >> From: neonixie-l@googlegroups.com [mailto:neonixie-l@googlegroups.com] >> On Behalf Of Bill Notfaded >> Sent: Wednesday, April 3, 2019 8:34 PM >> To: neonixie-l >> Subject: Re: [neonixie-l] B-5971 Smartsocket / Driver >> >> Ok guys I'm in too! Let's do this. I posted asking for the files from >> the Yahoo group a while ago... We need the PIC code for that PCB. I have a >> mother that's hoping she and my old V2 clock will have a baby soon. >> >> The trifecta would be sawt! I picked up six from that auction too. >> Only 3 sets are left. I ran up those two B-7971 tubes a little then held >> off... They sold for 530$for two I think a new record. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "neonixie-l" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to neonixie-l+unsubscr...@googlegroups.com. >> To post to this group, send an email to neonixie-l@googlegroups.com. >> To view this discussion on the web, visit >> https://groups.google.com/d/msgid/neonixie-l/9ee80a58-16a3-4f94-a437-d232187e92da%40googlegroups.com >> . >> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to a topic in the >> Google Groups "neonixie-l" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/neonixie-l/xI7RPpOyAQw/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> neonixie-l+unsubscr...@googlegroups.com. >> To post to this group, send an email to neonixie-l@googlegroups.com. >> To view this discussion on the web, visit >> https://groups.google.com/d/msgid/neonixie-l/006401d4eb53%24d05cc2a0%24711647e0%24%40com >> . >> For more options, visit https://groups.google.com/d/optout. >> > > -- > Y
Re: [neonixie-l] B-5971 Smartsocket / Driver
Just be aware that there is sometimes a startup issue with smartsockets. This is something I have experienced myself and others have reported it also. This results in a mangled display. Usually removing and restoring power will cure the issue. Sometimes it might take a couple of tries. Once in operation there is no further issue. What I think is happening is that when the sockets start up they self-enumerate, the first socket daisy-chains to the next and they assign themselves a number. If a later one in the chain is not yet ready, the enumeration fails. I’ve had displays like 1-2-1-2 where I would expect 1-2-3-4 for example. The possible fix might be to use the reset pin on the PIC, but the fuse for the reset pin was disabled when the code was compiled. Fortunately this pin is not used as an output and is still available. When I made the ZM1350 smartsocket PCBs I added access to the reset pins so that the smartockets could be reset in reverse order, to guarantee that each is ready at startup. The fuse for the reset pin can then be changed in the programmer - I use a Pickit - once the current hex file has been loaded into it. This code can then be saved back out. Be sure to use a pullup on the reset lines if they are to be used. It would then be up to whatever master controller you devise to send resets to each of the smartsockets in turn before sending messages to them. Maybe there is a way to ensure appropriate delays for each socket by delaying power to them - any suggestions? John S > On 6 Apr 2019, at 09:14, Thomas Kummer wrote: > > Put me down for one kit too please. > Thank you, Michail > > Sent from my iPhone > > On Apr 4, 2019, at 22:06, Bill Notfaded <mailto:notfad...@gmail.com>> wrote: > >> I'm in put me down for two sets at least. Did you get the PIC hex too? >> This is exciting stuff! Thanks Michail! >> >> On Thu, Apr 4, 2019, 7:03 PM Michail Wilson > <mailto:m...@michail.com>> wrote: >> I was able to get the files from Yahoo Groups. >> >> I've decided to go about putting the kits together myself since I will have >> about 24 tubes. >> >> So, I just ordered 40 sets of the boards to have extras in case anyone wants >> kits. >> >> Michail >> >> -Original Message- >> From: neonixie-l@googlegroups.com <mailto:neonixie-l@googlegroups.com> >> [mailto:neonixie-l@googlegroups.com <mailto:neonixie-l@googlegroups.com>] On >> Behalf Of Bill Notfaded >> Sent: Wednesday, April 3, 2019 8:34 PM >> To: neonixie-l >> Subject: Re: [neonixie-l] B-5971 Smartsocket / Driver >> >> Ok guys I'm in too! Let's do this. I posted asking for the files from the >> Yahoo group a while ago... We need the PIC code for that PCB. I have a >> mother that's hoping she and my old V2 clock will have a baby soon. >> >> The trifecta would be sawt! I picked up six from that auction too. >> Only 3 sets are left. I ran up those two B-7971 tubes a little then held >> off... They sold for 530$for two I think a new record. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "neonixie-l" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to neonixie-l+unsubscr...@googlegroups.com >> <mailto:neonixie-l%2bunsubscr...@googlegroups.com>. >> To post to this group, send an email to neonixie-l@googlegroups.com >> <mailto:neonixie-l@googlegroups.com>. >> To view this discussion on the web, visit >> https://groups.google.com/d/msgid/neonixie-l/9ee80a58-16a3-4f94-a437-d232187e92da%40googlegroups.com >> >> <https://groups.google.com/d/msgid/neonixie-l/9ee80a58-16a3-4f94-a437-d232187e92da%40googlegroups.com>. >> For more options, visit https://groups.google.com/d/optout >> <https://groups.google.com/d/optout>. >> >> -- >> You received this message because you are subscribed to a topic in the >> Google Groups "neonixie-l" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/neonixie-l/xI7RPpOyAQw/unsubscribe >> <https://groups.google.com/d/topic/neonixie-l/xI7RPpOyAQw/unsubscribe>. >> To unsubscribe from this group and all its topics, send an email to >> neonixie-l+unsubscr...@googlegroups.com >> <mailto:neonixie-l%2bunsubscr...@googlegroups.com>. >> To post to this group, send an email to neonixie-l@googlegroups.com >> <mailto:neonixie-l@googlegroups.com>. >> To view this discussion on the web, visit >> https://groups.google.com/d/msgid/neonixie-l/006401d4eb53%24d0
Re: [neonixie-l] B-5971 Smartsocket / Driver
Put me down for one kit too please. Thank you, Michail Sent from my iPhone > On Apr 4, 2019, at 22:06, Bill Notfaded wrote: > > I'm in put me down for two sets at least. Did you get the PIC hex too? This > is exciting stuff! Thanks Michail! > >> On Thu, Apr 4, 2019, 7:03 PM Michail Wilson wrote: >> I was able to get the files from Yahoo Groups. >> >> I've decided to go about putting the kits together myself since I will have >> about 24 tubes. >> >> So, I just ordered 40 sets of the boards to have extras in case anyone wants >> kits. >> >> Michail >> >> -Original Message- >> From: neonixie-l@googlegroups.com [mailto:neonixie-l@googlegroups.com] On >> Behalf Of Bill Notfaded >> Sent: Wednesday, April 3, 2019 8:34 PM >> To: neonixie-l >> Subject: Re: [neonixie-l] B-5971 Smartsocket / Driver >> >> Ok guys I'm in too! Let's do this. I posted asking for the files from the >> Yahoo group a while ago... We need the PIC code for that PCB. I have a >> mother that's hoping she and my old V2 clock will have a baby soon. >> >> The trifecta would be sawt! I picked up six from that auction too. >> Only 3 sets are left. I ran up those two B-7971 tubes a little then held >> off... They sold for 530$for two I think a new record. >> >> -- >> You received this message because you are subscribed to the Google Groups >> "neonixie-l" group. >> To unsubscribe from this group and stop receiving emails from it, send an >> email to neonixie-l+unsubscr...@googlegroups.com. >> To post to this group, send an email to neonixie-l@googlegroups.com. >> To view this discussion on the web, visit >> https://groups.google.com/d/msgid/neonixie-l/9ee80a58-16a3-4f94-a437-d232187e92da%40googlegroups.com. >> For more options, visit https://groups.google.com/d/optout. >> >> -- >> You received this message because you are subscribed to a topic in the >> Google Groups "neonixie-l" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/neonixie-l/xI7RPpOyAQw/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> neonixie-l+unsubscr...@googlegroups.com. >> To post to this group, send an email to neonixie-l@googlegroups.com. >> To view this discussion on the web, visit >> https://groups.google.com/d/msgid/neonixie-l/006401d4eb53%24d05cc2a0%24711647e0%24%40com. >> For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to the Google Groups > "neonixie-l" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to neonixie-l+unsubscr...@googlegroups.com. > To post to this group, send email to neonixie-l@googlegroups.com. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/neonixie-l/CADToqn2_j8JjdFxLJhLonBu3vtqWJJmqTsrQvJHRavtqdsDcKQ%40mail.gmail.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send an email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/DD20A03C-6DBD-46AE-993F-8A855DAD5A74%40gmail.com. For more options, visit https://groups.google.com/d/optout.
Re: [neonixie-l] B-5971 Smartsocket / Driver
I'm in put me down for two sets at least. Did you get the PIC hex too? This is exciting stuff! Thanks Michail! On Thu, Apr 4, 2019, 7:03 PM Michail Wilson wrote: > I was able to get the files from Yahoo Groups. > > I've decided to go about putting the kits together myself since I will > have about 24 tubes. > > So, I just ordered 40 sets of the boards to have extras in case anyone > wants kits. > > Michail > > -Original Message- > From: neonixie-l@googlegroups.com [mailto:neonixie-l@googlegroups.com] On > Behalf Of Bill Notfaded > Sent: Wednesday, April 3, 2019 8:34 PM > To: neonixie-l > Subject: Re: [neonixie-l] B-5971 Smartsocket / Driver > > Ok guys I'm in too! Let's do this. I posted asking for the files from > the Yahoo group a while ago... We need the PIC code for that PCB. I have a > mother that's hoping she and my old V2 clock will have a baby soon. > > The trifecta would be sawt! I picked up six from that auction too. > Only 3 sets are left. I ran up those two B-7971 tubes a little then held > off... They sold for 530$for two I think a new record. > > -- > You received this message because you are subscribed to the Google Groups > "neonixie-l" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to neonixie-l+unsubscr...@googlegroups.com. > To post to this group, send an email to neonixie-l@googlegroups.com. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/neonixie-l/9ee80a58-16a3-4f94-a437-d232187e92da%40googlegroups.com > . > For more options, visit https://groups.google.com/d/optout. > > -- > You received this message because you are subscribed to a topic in the > Google Groups "neonixie-l" group. > To unsubscribe from this topic, visit > https://groups.google.com/d/topic/neonixie-l/xI7RPpOyAQw/unsubscribe. > To unsubscribe from this group and all its topics, send an email to > neonixie-l+unsubscr...@googlegroups.com. > To post to this group, send an email to neonixie-l@googlegroups.com. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/neonixie-l/006401d4eb53%24d05cc2a0%24711647e0%24%40com > . > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send an email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/CADToqn2_j8JjdFxLJhLonBu3vtqWJJmqTsrQvJHRavtqdsDcKQ%40mail.gmail.com. For more options, visit https://groups.google.com/d/optout.
RE: [neonixie-l] B-5971 Smartsocket / Driver
I was able to get the files from Yahoo Groups. I've decided to go about putting the kits together myself since I will have about 24 tubes. So, I just ordered 40 sets of the boards to have extras in case anyone wants kits. Michail -Original Message- From: neonixie-l@googlegroups.com [mailto:neonixie-l@googlegroups.com] On Behalf Of Bill Notfaded Sent: Wednesday, April 3, 2019 8:34 PM To: neonixie-l Subject: Re: [neonixie-l] B-5971 Smartsocket / Driver Ok guys I'm in too! Let's do this. I posted asking for the files from the Yahoo group a while ago... We need the PIC code for that PCB. I have a mother that's hoping she and my old V2 clock will have a baby soon. The trifecta would be sawt! I picked up six from that auction too. Only 3 sets are left. I ran up those two B-7971 tubes a little then held off... They sold for 530$for two I think a new record. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send an email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/9ee80a58-16a3-4f94-a437-d232187e92da%40googlegroups.com. For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send an email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/006401d4eb53%24d05cc2a0%24711647e0%24%40com. For more options, visit https://groups.google.com/d/optout.
RE: [neonixie-l] B-5971 Smartsocket / Driver
Thanks though I am familiar with this link. I was hoping to find a kit with all parts. If I can’t find kits, I will just setup a group buy. Michail From: neonixie-l@googlegroups.com [mailto:neonixie-l@googlegroups.com] On Behalf Of Thomas Kummer Sent: Wednesday, April 3, 2019 4:01 PM To: neonixie-l@googlegroups.com Subject: Re: [neonixie-l] B-5971 Smartsocket / Driver https://oshpark.com/profiles/radmeck Sent from my iPhone On Apr 3, 2019, at 11:33, M1 wrote: Does any have or know where to get smartsockets for the 5971 tubes? I did post the question in: https://groups.google.com/forum/?utm_medium=email <https://groups.google.com/forum/?utm_medium=email&utm_source=footer#!forum/smartsocket-discuss> &utm_source=footer#!forum/smartsocket-discuss Figured this group will have more exposure to the kit, etc. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/52cb7dd9-4b73-4a81-9d1d-7ddf847d6938%40googlegroups.com <https://groups.google.com/d/msgid/neonixie-l/52cb7dd9-4b73-4a81-9d1d-7ddf847d6938%40googlegroups.com?utm_medium=email&utm_source=footer> . For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/C308342B-64A1-416B-8C1F-0DAA72935B40%40gmail.com <https://groups.google.com/d/msgid/neonixie-l/C308342B-64A1-416B-8C1F-0DAA72935B40%40gmail.com?utm_medium=email&utm_source=footer> . For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send an email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/014701d4ea90%2486d36c60%24947a4520%24%40com. For more options, visit https://groups.google.com/d/optout.
Re: [neonixie-l] B-5971 Smartsocket / Driver
I want to make a 5971 clock too. However the code on the PIC will have to be a bit different as the 5971 is a 13 segment tube as opposed to the 7971 and 8971, 14+1 segments Sent from my iPhone > On Apr 3, 2019, at 11:33, M1 wrote: > > Does any have or know where to get smartsockets for the 5971 tubes? > > I did post the question in: > https://groups.google.com/forum/?utm_medium=email&utm_source=footer#!forum/smartsocket-discuss > > Figured this group will have more exposure to the kit, etc. > > -- > You received this message because you are subscribed to the Google Groups > "neonixie-l" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to neonixie-l+unsubscr...@googlegroups.com. > To post to this group, send email to neonixie-l@googlegroups.com. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/neonixie-l/52cb7dd9-4b73-4a81-9d1d-7ddf847d6938%40googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send an email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/87A8425F-6E15-42EA-A165-8E277D390B44%40gmail.com. For more options, visit https://groups.google.com/d/optout.
Re: [neonixie-l] B-5971 Smartsocket / Driver
https://oshpark.com/profiles/radmeck Sent from my iPhone > On Apr 3, 2019, at 11:33, M1 wrote: > > Does any have or know where to get smartsockets for the 5971 tubes? > > I did post the question in: > https://groups.google.com/forum/?utm_medium=email&utm_source=footer#!forum/smartsocket-discuss > > Figured this group will have more exposure to the kit, etc. > > -- > You received this message because you are subscribed to the Google Groups > "neonixie-l" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to neonixie-l+unsubscr...@googlegroups.com. > To post to this group, send email to neonixie-l@googlegroups.com. > To view this discussion on the web, visit > https://groups.google.com/d/msgid/neonixie-l/52cb7dd9-4b73-4a81-9d1d-7ddf847d6938%40googlegroups.com. > For more options, visit https://groups.google.com/d/optout. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send an email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/C308342B-64A1-416B-8C1F-0DAA72935B40%40gmail.com. For more options, visit https://groups.google.com/d/optout.
