Re: [neonixie-l] How to get IV-11 VFD tubes properly aligned on protoboard
No need to place round as a circle on the proto board,you can place it liake square or other sharp,the leg is flexible,just be care of being short. For driving signel IV-11 tube as a module, check http://vfdclock.jimdo.com/. http://u.jimdo.com/www36/o/sb03fefd490221d21/img/i3cf583dfcc7c7895/1368173674/orig/iv-11-vfd-module.jpg 在 2013年12月5日星期四UTC+8上午6时26分55秒，nixiebunny写道： > > Gideon, > > The wires are flexible. Don't worry about stressing the glass. > > > On 12/4/2013 3:21 PM, Gideon Wackers wrote: > > I received my IV-11 tubes today and I was trying to put them on a board, > a > > prototyping board. The best way to insert them (that I found) was the > one > > in the attachment. But I noticed that the tubes would be ever so > slightly > > tilted, aprox 1-2 mm over the whole tube. Does anyone have a better way > to > > place them? I have added an empty piece of protoboard next to my best > try > > in case someone wants to show his/her idea. My alternative plan is to > just > > bend the wires a little but I don't want to stress the connection to the > > glass feedthrough (?) too much. > > > > For those who followed my previous thread(s) currently I am only waiting > > for the PLCC to dip sockets and DC-DC convertors, the rest is here. And > a > > friend is helping me with the arduino code. :) > > > > -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send an email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/41d01113-2268-4e8d-b9b2-6a6865d3da32%40googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
Re: [neonixie-l] How to get IV-11 VFD tubes properly aligned on protoboard
Ok I'll see wether i can place them a bit higher as I was pushing them almost against the pcb. -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send an email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/7cc4f94c-f120-4d80-bba4-ad77f5334f1b%40googlegroups.com. For more options, visit https://groups.google.com/groups/opt_out.
Re: [neonixie-l] How to get IV-11 VFD tubes properly aligned on protoboard
Yep, exactly. I can take a picture of how I place them, but basically it ends up being a sort of square or rectangle. I leave about a centimeter of lead above the protoboard so that the tube can be gently twisted the right way. -Adam On 12/4/2013 2:26 PM, David Forbes wrote: Gideon, The wires are flexible. Don't worry about stressing the glass. On 12/4/2013 3:21 PM, Gideon Wackers wrote: I received my IV-11 tubes today and I was trying to put them on a board, a prototyping board. The best way to insert them (that I found) was the one in the attachment. But I noticed that the tubes would be ever so slightly tilted, aprox 1-2 mm over the whole tube. Does anyone have a better way to place them? I have added an empty piece of protoboard next to my best try in case someone wants to show his/her idea. My alternative plan is to just bend the wires a little but I don't want to stress the connection to the glass feedthrough (?) too much. For those who followed my previous thread(s) currently I am only waiting for the PLCC to dip sockets and DC-DC convertors, the rest is here. And a friend is helping me with the arduino code. :) -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send an email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/529FB6AC.9010707%40gmail.com. For more options, visit https://groups.google.com/groups/opt_out.
Re: [neonixie-l] How to get IV-11 VFD tubes properly aligned on protoboard
Gideon, The wires are flexible. Don't worry about stressing the glass. On 12/4/2013 3:21 PM, Gideon Wackers wrote: I received my IV-11 tubes today and I was trying to put them on a board, a prototyping board. The best way to insert them (that I found) was the one in the attachment. But I noticed that the tubes would be ever so slightly tilted, aprox 1-2 mm over the whole tube. Does anyone have a better way to place them? I have added an empty piece of protoboard next to my best try in case someone wants to show his/her idea. My alternative plan is to just bend the wires a little but I don't want to stress the connection to the glass feedthrough (?) too much. For those who followed my previous thread(s) currently I am only waiting for the PLCC to dip sockets and DC-DC convertors, the rest is here. And a friend is helping me with the arduino code. :) -- You received this message because you are subscribed to the Google Groups "neonixie-l" group. To unsubscribe from this group and stop receiving emails from it, send an email to neonixie-l+unsubscr...@googlegroups.com. To post to this group, send an email to neonixie-l@googlegroups.com. To view this discussion on the web, visit https://groups.google.com/d/msgid/neonixie-l/529FAC2F.8050002%40dakotacom.net. For more options, visit https://groups.google.com/groups/opt_out.
