Hi All,
I still can't get it to work. Is there anything that needs root access
or something?
Sometimes I have one channel that I can't change, sometimes I don't have
any channels at all. Even when I didn't change a thing. Just a reboot
would do the trick.
Bert
Op zo 07-12-2003, om 14:31 schreef Bert Meersma:
Hi,
I seem to have made some progress here. Unfortunately, I haven't got a clue
how I did it. But I have one channel now. The weird thing now is that when I
scan for channels, every frequency that is scanned is recorded in the
channel list. But when I try to change te channel to another one, nothing
happens. I only can watch that one channel.
Bert
- Original Message -
From: et [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, December 07, 2003 1:25 PM
Subject: Re: [newbie] [TV-Card] No channels are found
On Sunday 07 December 2003 10:53 am, Bert Meersma wrote:
Hi all,
I have a Pinnacle PCTV tv card. I have tried configuring this card by
putting the right lines in the modules.conf file, but I can't get any
channels listed.
Now I removed the lines from modules.conf and did a rmmod bttv. After
that I did modprobe bttv. Dmesg than gave the following output:
bttv: driver version 0.7.100 loaded
bttv: using 4 buffers with 2080k (8320k total) for capture
bttv: Host bridge is VIA Technologies, Inc. VT8377 [KT400 AGP] Host
Bridge
bttv: Bt8xx card found (0).
bttv0: Bt878 (rev 17) at 00:08.0, irq: 19, latency: 32, mmio: 0xdddfe000
bttv0: detected: Pinnacle PCTV [card=39], PCI subsystem ID is 11bd:0012
bttv0: using: BT878(Pinnacle PCTV Studio/Ra) [card=39,autodetected]
tda9887: probing bt848 #0 i2c adapter [id=0x10005]
tda9887: chip found @ 0x86
bttv0: i2c attach [client=tda9887,ok]
tuner: probing bt848 #0 i2c adapter [id=0x10005]
tuner: chip found @ 0xc0
bttv0: i2c attach [client=(tuner unset),ok]
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: pinnacle/mt: id=1 info=PAL / mono radio=no
tuner: type set to 33 (MT2032 universal)
MT2032: Companycode=3cbf Part=42 Revision=46
not a MT2032.
bttv0: using tuner=33
bttv0: i2c: checking for MSP34xx @ 0x80... not found
bttv0: i2c: checking for TDA9875 @ 0xb0... not found
bttv0: i2c: checking for TDA7432 @ 0x8a... not found
bttv0: PLL: 28636363 = 35468950 ... ok
bttv0: registered device video0
bttv0: registered device vbi0
I think this is correct, although I'm not sure.
But no matter what I do, I can't get any channels listed. Not even get a
full screen with snow. Al I get is a tv screen that's mostly black or
blue or green and a little edge with snow on the upper side. Check out
the screenshot on:
http://members1.chello.nl/~b.meersma/xawtv.png
I'm trying this all on Mandrake 9.1. And there's no problem in the
cable, because in Windows it does work.
Could someone help me with this please.
Kind Regards,
Bert Meersma
have you tried to use the different 'overlay' methods (under capture in
xawTV)? these are sometimes specific to your video card's (not the tv
card)
capabilities, but this really looks to me as if you might try a different
setting for frequency table, and or video source.
Let us know if you do get it working? Ok?
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
__
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
--
Groeten,
Bert Meersma
_
ICQ# 61969491
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com