Re: [newbie] Ethernet and DSL
hey, 7.1 will change your subnet mask to 255.255.0.0 if you configure your ethernet card during install. It might be that simple. It was for me a few times ;-) Bombardier Systems Consulting wrote: Brian, I recently installed 7.1 and had problems that folks here helped me with. This is how I set it up to finally work: This is what I did in NETCONF. Basic Host Information Host name + domain = linux.myNTserverdomain name Adaptor1 = enabled DHCP, net device = eth0, kernel module = 3c574-TX, Irq=10, all other fields blank Name server specifications (DNS) DNS is required for normal operation (selected) default domain = 10.0.0.1 IP of name server 1 = same DNS address that I use in my other boxes IP of name server 2 = same DNS address that I use in my other boxes IP of name server 3 = same DNS address that I use in my other boxes all other fields blank Routing and gateways Set defaults = enable routing(selected) and Default gateway = 10.0.0.1 I have not done anything with the other NETCONF options You were not clear in your email what kind of DSL modem you have and if you have fixed IP addresses of your modem/router supports DHCP using NAT. The above instructions are assuming the later. Hope this helps Jim - Original Message - From: "Brian Jacob Rogers" [EMAIL PROTECTED] To: "Newbie" [EMAIL PROTECTED] Sent: Saturday, October 28, 2000 7:38 AM Subject: [newbie] Ethernet and DSL Hi all, I am a real newbie to trying to set this up. I have a 3com ethernet card which is connected to my dsl modem. I have a 2 station network with the other one running win98se. I can't seem to configure my sound (creative sound blaster audioPCI 128D) or my nic (3com Etherlink 10/100). Can anyone offer any advice? Thank you. Brian -- The frammisgoshes should be distimmed because a frammisgosh is like a farble and distimming is like gosketing and our ancestors always gosketed the farbles. --R.A. Wilson
[newbie] Ethernet and DSL
Hi all, I am a real newbie to trying to set this up. I have a 3com ethernet card which is connected to my dsl modem. I have a 2 station network with the other one running win98se. I can't seem to configure my sound (creative sound blaster audioPCI 128D) or my nic (3com Etherlink 10/100). Can anyone offer any advice? Thank you. Brian
Re: [newbie] Ethernet and DSL
Brian, I recently installed 7.1 and had problems that folks here helped me with. This is how I set it up to finally work: This is what I did in NETCONF. Basic Host Information Host name + domain = linux.myNTserverdomain name Adaptor1 = enabled DHCP, net device = eth0, kernel module = 3c574-TX, Irq=10, all other fields blank Name server specifications (DNS) DNS is required for normal operation (selected) default domain = 10.0.0.1 IP of name server 1 = same DNS address that I use in my other boxes IP of name server 2 = same DNS address that I use in my other boxes IP of name server 3 = same DNS address that I use in my other boxes all other fields blank Routing and gateways Set defaults = enable routing(selected) and Default gateway = 10.0.0.1 I have not done anything with the other NETCONF options You were not clear in your email what kind of DSL modem you have and if you have fixed IP addresses of your modem/router supports DHCP using NAT. The above instructions are assuming the later. Hope this helps Jim - Original Message - From: "Brian Jacob Rogers" [EMAIL PROTECTED] To: "Newbie" [EMAIL PROTECTED] Sent: Saturday, October 28, 2000 7:38 AM Subject: [newbie] Ethernet and DSL Hi all, I am a real newbie to trying to set this up. I have a 3com ethernet card which is connected to my dsl modem. I have a 2 station network with the other one running win98se. I can't seem to configure my sound (creative sound blaster audioPCI 128D) or my nic (3com Etherlink 10/100). Can anyone offer any advice? Thank you. Brian
Re: [newbie] Ethernet and DSL...do this first
Brian, I forgot to pass on the install info that I was given for DHCP if it is not already installed. These are the instructions given to me. Sounds like you did an automatic install under Mandrake. The automatic install does not install the dhcp client. You had to do that manually. You give no indication of which (if any) Window Manager you use so: Login as root put the initial installation cd in the cdrom drive. From the command line type 'cd /mnt/cdrom/Mandrake/RPMS' Then type 'rpm -i dhcp-client-3.0b1pl12-4mdk.i586.rpm' Then type 'shutdown -r now' Sorry I did not send this with my earlier message...this needs to be done before the other for it to work. - Original Message - From: "Brian Jacob Rogers" [EMAIL PROTECTED] To: "Newbie" [EMAIL PROTECTED] Sent: Saturday, October 28, 2000 7:38 AM Subject: [newbie] Ethernet and DSL Hi all, I am a real newbie to trying to set this up. I have a 3com ethernet card which is connected to my dsl modem. I have a 2 station network with the other one running win98se. I can't seem to configure my sound (creative sound blaster audioPCI 128D) or my nic (3com Etherlink 10/100). Can anyone offer any advice? Thank you. Brian